RHBA-2015:2202 - Bug Fix Advisory

Topic

Updated libvirt packages that fix several bugs and add various enhancements are now available for Red Hat Enterprise Linux 7.

Description

The libvirt library is a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems. In addition, libvirt provides tools for remote management of virtualized systems.

The libvirt packages have been upgraded to upstream version 1.2.17, which provides a number of bug fixes and enhancements over the previous version. (BZ#1194593)

This update also fixes the following bugs:

• Previously, when the default CPU mask was specified while using Non-Uniform Memory Access (NUMA) pinning, virtual CPUs (vCPUs) could not be pinned to physical CPUs that were not contained in the default node mask. With this update, the control groups (cgroups) code correctly attaches only vCPU threads instead of the entire domain group, and using NUMA pinning with the default cpuset subsystem now works as expected. (BZ#1207257)
• After hot-plugging an invalid LUN device, the next start or reboot of the guest failed, and the guest could not be started until the hot-plugged device was removed. This update adds an additional domain XML check that properly detects invalid LUN devices, and attempting to hot-plug them now fails. (BZ#1201143)
• Previously, attempting to use the virDomainGetBlockIoTune() API failed on systems running a recent version of libvirt together with an earlier version of QEMU. With this update, libvirt correctly checks QEMU version compatibility, which makes it possible to use the virDomainGetBlockIoTune() API even with less recent QEMU versions. (BZ#1224053)
• The severity of the "VIR_ERR_NO_DOMAIN_METADATA" error has been lowered to the DEBUG level, which ensures that the error no longer clutters libvirt logs. (BZ#1220474)
• Previously, the libvirtd daemon terminated unexpectedly when parsing disk volume backing strings that contained a URI without a path. With this update, libvirtd has been adjusted not to access the path segment of a URI when the path is not provided, and the described crash no longer occurs. (BZ#1189007)
• If a running guest was pinned to a host NUMA node, moving the guest to another node failed. With this update, libvirt primarily uses cgroups to configure host NUMA node affinity, and moving a running pinned guest works. (BZ#1206625)

In addition, this update adds the following enhancements:

• A number of new options have been added to the "virsh blkdeviotune" command that allows the user to configure for block device I/O throttling. For more information, see the virsh(1) man page. (BZ#1157997)
• With this update, libvirt supports the memory hot-plug and hot-unplug features, which allow users to dynamically re-allocate memory resources among virtual machines. (BZ#790583)
• The virDomainSetUserPassword API has been introduced in libvirt. This allows setting passwords for any guest user, including the administrator, by using the QEMU guest agent. (BZ#1174177)
• It is now possible to disable "mrg_rxbuf" for virtio network interface controller (NICs) in the domain XML file. This allows the use of applications that cannot run with "mrg_rxbuf" enabled. (BZ#1186886)
• This update enables support for the Ceph storage driver backend, and thus allows Ceph storage pools to be accessed via libvirt APIs. (BZ#1187533)
• When performing a live migration on a domain including its disks, libvirt now automatically pre-creates storage on the destination file system. This simplifies the migration process and prevents potential errors caused by pre-creating storage manually. (BZ#927252)
• When live migrating a domain as well as its disks, the user can now select which disks are copied during the migration. (BZ#1210352)

Users of libvirt are advised to upgrade to these updated packages, which fix these bugs and add these enhancements. After installing the updated packages, libvirtd will be restarted automatically.

Solution

Before applying this update, make sure all previously released errata
relevant to your system have been applied.

For details on how to apply this update, refer to:

https://access.redhat.com/articles/11258

Affected Products

• Red Hat Enterprise Linux Server 7 x86_64
• Red Hat Enterprise Linux for x86_64 - Extended Update Support 7.7 x86_64
• Red Hat Enterprise Linux for x86_64 - Extended Update Support 7.6 x86_64
• Red Hat Enterprise Linux for x86_64 - Extended Update Support 7.5 x86_64
• Red Hat Enterprise Linux for x86_64 - Extended Update Support 7.4 x86_64
• Red Hat Enterprise Linux for x86_64 - Extended Update Support 7.3 x86_64
• Red Hat Enterprise Linux Server - AUS 7.7 x86_64
• Red Hat Enterprise Linux Server - AUS 7.6 x86_64
• Red Hat Enterprise Linux Server - AUS 7.4 x86_64
• Red Hat Enterprise Linux Workstation 7 x86_64
• Red Hat Enterprise Linux Desktop 7 x86_64
• Red Hat Enterprise Linux for IBM z Systems 7 s390x
• Red Hat Enterprise Linux for IBM z Systems - Extended Update Support 7.7 s390x
• Red Hat Enterprise Linux for IBM z Systems - Extended Update Support 7.6 s390x
• Red Hat Enterprise Linux for IBM z Systems - Extended Update Support 7.5 s390x
• Red Hat Enterprise Linux for IBM z Systems - Extended Update Support 7.4 s390x
• Red Hat Enterprise Linux for IBM z Systems - Extended Update Support 7.3 s390x
• Red Hat Enterprise Linux for Power, big endian 7 ppc64
• Red Hat Enterprise Linux for Power, big endian - Extended Update Support 7.7 ppc64
• Red Hat Enterprise Linux for Power, big endian - Extended Update Support 7.6 ppc64
• Red Hat Enterprise Linux for Power, big endian - Extended Update Support 7.5 ppc64
• Red Hat Enterprise Linux for Power, big endian - Extended Update Support 7.4 ppc64
• Red Hat Enterprise Linux for Power, big endian - Extended Update Support 7.3 ppc64
• Red Hat Enterprise Linux for Scientific Computing 7 x86_64
• Red Hat Enterprise Linux Server from RHUI 7 x86_64
• Red Hat Gluster Storage Server for On-premise 3 for RHEL 7 x86_64
• Red Hat Enterprise Linux EUS Compute Node 7.7 x86_64
• Red Hat Enterprise Linux EUS Compute Node 7.6 x86_64
• Red Hat Enterprise Linux EUS Compute Node 7.5 x86_64
• Red Hat Enterprise Linux EUS Compute Node 7.4 x86_64
• Red Hat Enterprise Linux EUS Compute Node 7.3 x86_64
• Red Hat Enterprise Linux Server - AUS 7.3 x86_64
• Red Hat Enterprise Linux for Power, little endian 7 ppc64le
• Red Hat Enterprise Linux for Power, little endian - Extended Update Support 7.7 ppc64le
• Red Hat Enterprise Linux for Power, little endian - Extended Update Support 7.6 ppc64le
• Red Hat Enterprise Linux for Power, little endian - Extended Update Support 7.5 ppc64le
• Red Hat Enterprise Linux for Power, little endian - Extended Update Support 7.4 ppc64le
• Red Hat Enterprise Linux for Power, little endian - Extended Update Support 7.3 ppc64le
• Red Hat Enterprise Linux for Power, little endian - Extended Update Support 7.2 ppc64le
• Red Hat Enterprise Linux Server - TUS 7.7 x86_64
• Red Hat Enterprise Linux Server - TUS 7.6 x86_64
• Red Hat Enterprise Linux Server - TUS 7.3 x86_64
• Red Hat Enterprise Linux Server for Power LE - Update Services for SAP Solutions 7.7 ppc64le
• Red Hat Enterprise Linux Server for Power LE - Update Services for SAP Solutions 7.6 ppc64le
• Red Hat Enterprise Linux Server for Power LE - Update Services for SAP Solutions 7.4 ppc64le
• Red Hat Enterprise Linux Server for Power LE - Update Services for SAP Solutions 7.3 ppc64le
• Red Hat Enterprise Linux for x86_64 - Update Services for SAP Solutions 7.7 x86_64
• Red Hat Enterprise Linux for x86_64 - Update Services for SAP Solutions 7.6 x86_64
• Red Hat Enterprise Linux for x86_64 - Update Services for SAP Solutions 7.4 x86_64
• Red Hat Enterprise Linux for x86_64 - Update Services for SAP Solutions 7.3 x86_64

Fixes

• BZ - 790583 - [RFE] Support for memory hot-plug
• BZ - 847198 - The count of vcpu with config flag should be compared with the maximum vcpus with config flag
• BZ - 853839 - Try to make debugging of "cannot acquire state change lock" easier
• BZ - 858147 - when cpu mode is 'host-model' ,the vendor_id attribute isn't effective but still can be set in domain's xml.
• BZ - 872028 - virsh detach-device does not check the interface type
• BZ - 872424 - running pmsuspend on a pmsuspended domain will get unclear error
• BZ - 877330 - Can not only use ich9-uhci1/2/3 model as usb controller model
• BZ - 886456 - change-media fail with permission denied on virtio scsi cdrom
• BZ - 888748 - [RFE] Perform RNG schema validation on XML definitions
• BZ - 890606 - duplicate virtio-serial addresses are not rejected
• BZ - 890648 - guest agent commands will hang if the guest agent crashes while executing a command
• BZ - 893738 - libvirt should log an error/fail attempted use of any SRIOV VF whose PF is offline
• BZ - 907779 - virsh net-update can add multiple dhcp sections to ipv4 in network
• BZ - 921426 - The other opiton of the 'virsh find-storage-pool-sources-as' command didn't work while appointed the storage type logical
• BZ - 927252 - Pre-create storage on Live Migration
• BZ - 952499 - change-media can not insert iso when start rhel7 guest with empty cdrom
• BZ - 956891 - Libvirt should detect it's running in virtual machine and set default network accordingly
• BZ - 958510 - virStorageVolCreateXML requires <capacity> even when <backingStore> is specified
• BZ - 976387 - taint domain if it uses host CD-ROM passthrough
• BZ - 981107 - nwfilter-edit should give error when modify the value to inadmissibility
• BZ - 981546 - the vfs should be clear up while there isn't any vfs on the host
• BZ - 985653 - The network should not be saved or defined successfuly if the start NAT address is large than the end address
• BZ - 998813 - [RFE] add support for pci-serial
• BZ - 1004596 - need give more suitable error info when changing pci-bridge address function to '0x8'
• BZ - 1007228 - update-device report success when failing to set <boot order> to cdrom/floppy device.
• BZ - 1021480 - Can specify <serial> within type='lun' disk
• BZ - 1022292 - libvirt should check the value range of average element in <outbound> before updating interface device
• BZ - 1043436 - Refuse to start a domain with a USB disk attached to a PCI bus
• BZ - 1054437 - libvirt should use server-side filtering for event registration
• BZ - 1066375 - libvirt should provide error msg if both --tunnelled and --listen-address are specified
• BZ - 1069590 - Lack of "<master startport='0'/>" section while start one guest with 'ehci' + 'vt82c686b-uhci' model usb companion controllers
• BZ - 1070695 - dominfo get wrong info after set memory to an lxc guest
• BZ - 1073233 - libvirt should forbid doing tunnelled migration with migrateuri using migrateToURI2 api
• BZ - 1073305 - resize volume can go beyond the pool capacity
• BZ - 1073506 - [RFE] Add keepalive support into virsh
• BZ - 1076354 - The new name of guest will change to old when destroy the guest after migration with dname and persistent flag
• BZ - 1076708 - Upon assigning addresses to new virtio-serial ports, libvirt can over-allocate
• BZ - 1079917 - The packets can not be NATed by using an inclusive range of IP addresses in SNAT in iptables.
• BZ - 1084876 - RFE: rename /etc/sysctl.d/libvirtd to something starts with numbers
• BZ - 1089914 - first serial console is not formatted when other consoles are present
• BZ - 1090093 - Improve error reporting when QEMU fails with incoming migration
• BZ - 1094205 - virtual network static routes not checked for collision with existing routes/interfaces on host
• BZ - 1095637 - virsh dominfo for LXC domain causes spurious error "this function is not supported by the connection driver: virDomainHasManagedSaveImage"
• BZ - 1115289 - Add example policykit rules for libvirt ACLs
• BZ - 1123767 - [Storage] validate 'unknown' type logical volume pool xml failed, however, pool can be created successfully
• BZ - 1124841 - unable to connect virtio-win images to qemu:///session VM: unable to set security context on iso/vfd image
• BZ - 1125755 - Start a network with NAT port "0-65535" will fail but create a new bridge
• BZ - 1125764 - libvirt should check stp delay time
• BZ - 1126762 - numatune and domiftune should be unsupported in session mode
• BZ - 1127045 - Libvirt should provide more accurate help messages of iface/net/pool-define in manpage and help
• BZ - 1129198 - [Doc]Add a note that spice channel is ignored without spice graphics
• BZ - 1130390 - 'server' type interface with no listen address fails
• BZ - 1131486 - libvirt should ignore 'cpuset' specified by vcpu if attribute 'emulatorpin' or 'vcpupin' is specified
• BZ - 1131755 - Error info instead of success report outputs when SIGINT to interrupt a "virsh save" process but "virsh save" job finished successfully
• BZ - 1131919 - setmem doesn't take effect for lxc guest
• BZ - 1132900 - Failed to start guest if all slots of one bus have been specified by adding pci devices
• BZ - 1135442 - Output messages are not accurate after blockpull job is aborted
• BZ - 1135491 - <iothread> cpuset CPU binding support
• BZ - 1138125 - forbid invalid address type for panic device
• BZ - 1138516 - The name and format of volume in disk pool are changed after pool refreshed
• BZ - 1138539 - forbid negative value for queues of network and bridge
• BZ - 1140034 - Prompt info is not exact for command "virsh desc" with option --title
• BZ - 1140958 - check the value of memory statistic period in xml
• BZ - 1140960 - present memballoon statistic period in live xml
• BZ - 1141119 - virsh domif-getlink cmd gets "default" which is a invalid link state.
• BZ - 1141159 - libvirtd crash while resume the migrating guest in the target host
• BZ - 1142631 - ensure virtual disk's logical device name uniqueness
• BZ - 1142636 - [REF] generate summary statistics of domblkstat for QEMU domain
• BZ - 1142703 - Improve the error report when there is already a blockpull job
• BZ - 1143800 - Libvirtd was killed after several cycles creating/deleting external disk snapshot with glusterfs backend
• BZ - 1143832 - [graphical buffers]start guest failed when graphics defaultMode='secure', meanwhile add eight different channels mode='insecure'
• BZ - 1143837 - libvirt should improve error message output when use domstats with option --domain and --list-*
• BZ - 1143921 - Setting metadata with special character in key value caused guest failed to start and disappeared after restarting libvirtd.
• BZ - 1144923 - Improve the error info when do blockpull on same source file
• BZ - 1146334 - report error for invalid memAccess when parsing cpu
• BZ - 1146539 - Setting value to 0 will not turn to be unlimited with virsh command memtune
• BZ - 1146886 - [DAC] permission denied with auto generated channel socket path when set user as root in qemu.conf
• BZ - 1147195 - Libvirt should remove <backend> element on unsupported interface model in XML
• BZ - 1147471 - Ejecting locked cdrom tray using update-device fails but next try succeeds
• BZ - 1147847 - error message should be improved when use domtime to a shutoff guest
• BZ - 1150484 - ioeventfd for virtio-scsi not enabled in libvirt
• BZ - 1151942 - virsh net-edit should check commas in DNS TXT record name.
• BZ - 1152404 - flags description of blkdeviotune command is wrong
• BZ - 1152473 - run net-dhcp-leases command in quiet mode cannot get any output
• BZ - 1153891 - Guest start failed when configure security_driver = ["selinux", "selinux"] in qemu.conf
• BZ - 1155843 - Expose error when parsing wrong size and unit for shmem device
• BZ - 1155887 - [Doc]Only expose managed attribute for PCI hostdev
• BZ - 1157997 - FOO_max for I/O throttling official support on rhel 7.1
• BZ - 1158034 - Fail to save guest to the pre-create save file which locate in root_squash nfs server
• BZ - 1158722 - A memory leak in cmdNetworkDHCPLeases
• BZ - 1159171 - vshCommandOptScaledInt should reject negative value and void inaccurate error message
• BZ - 1159180 - Do NOT allow to define 'scsi_host' pool using the target already defined pool using 'fc_host'
• BZ - 1160559 - libvirt do a wrong check when try to use vcpupin --config to a running vm
• BZ - 1160995 - Should disallow to use Negative values for 'max_*' in libvirtd.conf
• BZ - 1161461 - forbid to set memory to ZERO
• BZ - 1161541 - virNodeSetMemoryParameters API doesn't report any errors
• BZ - 1161617 - QEMU iothread hot-add and remove support
• BZ - 1161831 - screenshot after qemu-attach crashes libvirtd
• BZ - 1162947 - emulatorpin is not consistent with cgroup in NUMA host
• BZ - 1163553 - Improve error when start a guest with iscsi disk which port = -1
• BZ - 1164053 - address of isa-serial chardev is ignored
• BZ - 1164080 - libvirt do a wrong check for the hot-unplug disk when use blkdeviotune --config
• BZ - 1164627 - libvirt should forbid attach a unsupport console to a active vm
• BZ - 1164966 - Guest could still start up while set vnc port=0 or 65536 with the qemu-kvm packet
• BZ - 1165029 - need to expose PCI address of ivshmem device
• BZ - 1165119 - libvirt should provide more specific error when failed to acquire the lock using sanlock
• BZ - 1165485 - libvirt should should add a check for disk seclabel model settings
• BZ - 1165580 - blkiotune value should be consistent with value in cgroup
• BZ - 1165993 - libvirt show the wrong network bandwidth when start with server or client type network
• BZ - 1166024 - do change-media --eject to a network cdrom will make guest disappear after restart libvirtd
• BZ - 1168530 - [RFE] qemu-ga cannot be used after hotplug it but can be used after restart libvirtd
• BZ - 1168849 - libvirt rejects virtio-scsi options when model is not specified
• BZ - 1169183 - improve error messages when use attach-device add tpm or panic device to a guest
• BZ - 1170092 - domain cannot start with virtio and serial console when the first console is virtio
• BZ - 1170140 - indent for <sysinfo>
• BZ - 1170492 - ignore emulatorpin when vcpu placement is auto
• BZ - 1171484 - virsh cpu-baseline includes "invtsc" cpu feature
• BZ - 1171533 - [snapshot]Error message should be improved when forbidding to create internal snapshot with passthrough device
• BZ - 1171582 - guest will disappear after set agent or smart card controller with a negative number after restart libvirtd
• BZ - 1171933 - libvirt should add a check for invalid target path when start a iscsi pool
• BZ - 1171984 - libvirt should also check if hostname is the same with ip address when we try to define two pool have same source
• BZ - 1172015 - Failed to start multi-iqn based storage pool
• BZ - 1172468 - Fail to build a disk pool with a disk without disk label
• BZ - 1172526 - libvirt should forbid add a address for guestfwd type channel
• BZ - 1172544 - ESX driver does not support scsi-passthru devices
• BZ - 1173420 - report error when set too large max_sectors for controller
• BZ - 1173468 - Domain configure xml validation fails when adding <link state='down'/> to network interface
• BZ - 1173478 - Domain configure xml validation fails when using rbd based image as disk specifying usage in authentication
• BZ - 1174096 - some issue when we try to cold-unplug, hot-plug... a lease device
• BZ - 1174147 - uninitialised byte for virDomainOpenGraphicsFD
• BZ - 1174154 - libvirt should auto generate a virtio-serial when cold plug a agent
• BZ - 1174177 - RFE: provide API for setting root/administrator account password via QEMU guest agent
• BZ - 1174226 - Reset agent error state flag after guest agent restarts, or guest restarts
• BZ - 1174569 - guest cannot start with a shareable hostdev network iscsi device
• BZ - 1175123 - Inactive external snapshot can't work after libvirtd restart
• BZ - 1175449 - Huge pages: "libvirtError: internal error: Unable to find any usable hugetlbfs mount for 4 KiB"
• BZ - 1176020 - libvirt should do a right check for numa cpus set
• BZ - 1176050 - libvirt emitted a invalid option "-bootloader" to qemu-kvm
• BZ - 1176503 - libvirt will remove the seclabel model of lxc vm after guest start fail
• BZ - 1176510 - Volumes list duplicates after libvirtd reloading
• BZ - 1176739 - guest will disappear after use setmaxmem set a big mem that libvirt cannot parse
• BZ - 1177062 - The error messages are not accurate enough when do blockcommit passing target[index] to base and top
• BZ - 1177219 - [Storage] vol-download / upload works well with an offset which was "too large"
• BZ - 1177237 - redirfilter with version='1.1' allows a USB 3.0 device
• BZ - 1177723 - libvirt should set the old value if set the new failed when use domiftune
• BZ - 1177733 - Guest with a volume disk fail to start automatically after libvirtd restart
• BZ - 1178652 - libvirt cannot recognize guest-panicked status when restart libvirt
• BZ - 1178850 - host-passthrough should allow enabling/disabling CPU flags
• BZ - 1178853 - Allow disabling the PMU in the xml file
• BZ - 1178986 - [RFE]: add support for setting RT priority of vCPU threads
• BZ - 1179533 - libvirt should post accurate error when create internal snapshot with guest source file based on ceph
• BZ - 1179678 - when migrate a vm with --copy-storage-all or --copy-storage-inc to a host with insufficient disk space, no error message produced.
• BZ - 1179680 - Fail to install a guest if specify a non-spicevmc channel type with option --channel
• BZ - 1179684 - Sub-element of driver "queues , cmd_per_lun, max_sectors " for controller cannot be set at the same time
• BZ - 1179729 - [RFE] libvirt should be able to report guest ip addresses on virtual networks
• BZ - 1179981 - libvirtd segfault when reloading while starting up
• BZ - 1180011 - wrong display of guest interface nwfilter settings
• BZ - 1181062 - Default disk pool format should not be 'unknown'
• BZ - 1181087 - Libvirt should better give an error when defining fs pool with the multiple source devices
• BZ - 1181182 - libvirt will set a wrong priv->origname when do migrate to target then migrate back to source fail
• BZ - 1181465 - too little cpu information when use virsh capabilities in ppc64
• BZ - 1182388 - adding the panic device should be permitted but have no effect for POWER
• BZ - 1182467 - guest with NUMA topology cannot start without numatune memory nodeset
• BZ - 1183869 - save-image-edit show the wrong xml when edit and cannot resume success if we edit success with passthrough model cpu
• BZ - 1183890 - save-image-edit will make spice or vnc passwd disappear when we edit something
• BZ - 1183893 - Fail to do managedsave/save/dump with the guest after change the security-driver from selinux to none
• BZ - 1184736 - libvirt should verify proper address family of <host> when updating network
• BZ - 1185165 - qcow volume encryption element gone after refresh pool
• BZ - 1186175 - report invalid Host nodeset for memnode
• BZ - 1186199 - Per-node memory binding lost when 'auto' vcpu placement without <memory> placement
• BZ - 1186765 - libvirtd crashes after chardev hotplug crashes qemu
• BZ - 1186886 - RFE : Allow virtio-net-pci.mrg_rxbuf to be disabled without using qemu:commandline XML.
• BZ - 1186969 - Libvirt passes wrong cifs service syntax to mount.cifs when starting netfs pool using cifs format type
• BZ - 1187533 - [RHEL 7 FEAT] libvirt is missing ceph support (rbd)
• BZ - 1188914 - improve the error when add a input device to lxc domain and forbid add a unsupported input device to lxc domain
• BZ - 1189007 - libvirtd crashes when storage pool contains a qcow file backed by "nbd://localhost" or other URI lacking the path component
• BZ - 1190590 - Generate the redundant record in guest's xml while configure many same metadatas in guest's xml
• BZ - 1190956 - libvirt should report an error or set default value when define/edit a vm have invalid vram or ram
• BZ - 1191016 - domdisplay show the wrong IP address for network type listen address
• BZ - 1191355 - target libvirtd crashed when migrate uri not right
• BZ - 1191567 - numa-enabled domains cannot be migrated from RHEL hosts older than 7.1 to 7.1
• BZ - 1192318 - support IPv6 in listen type network
• BZ - 1194593 - Rebase libvirt to current upstream release
• BZ - 1195461 - Disk type=block converted to disk type=file after block copy
• BZ - 1195882 - Can't create VM with 7.1 hosts because of "QEMU doesn't support virtio scsi controller" error
• BZ - 1196185 - libvirt doesn't set permissions for VFIO endpoint
• BZ - 1196503 - libvirt should output error when set a wrong ipv6 host id
• BZ - 1196528 - Libvirtd crashes when a storage file backed by gluster protocol lacking path
• BZ - 1196644 - domains have hugepages settings cannot be migrated from RHEL hosts older than 7.1 to 7.1
• BZ - 1196934 - libvirt sometimes output useless error when qemu failed to start
• BZ - 1197580 - libvirt should escape possible invalid characters.
• BZ - 1197600 - libvirt should remove the pid file of vm after vm offline if we restart libvirtd after start the vm
• BZ - 1199036 - Libvirtd was restarted when do active blockcommit while there is a blockpull job running
• BZ - 1199182 - 2nd active commit after snapshot triggers qemu failure
• BZ - 1199446 - HLE and RTM still listed in /usr/share/libvirt/cpu_map.xml for haswell and broadwell
• BZ - 1200206 - Guest fail to restore when disk is iscsi lun using authenticate pool/volume source with direct mode
• BZ - 1201760 - on_reboot=destroy does not work when rebooting from inside the guest
• BZ - 1202606 - libvirt should improve the xml format when define a vm have a empty <cpu/>
• BZ - 1202704 - libvirt doesn't deal with the block job info correctly when fail to do active blockcommit
• BZ - 1203628 - Libvirt should post error when try to create external snapshot while there is a blockpull job running
• BZ - 1203931 - [RFE] libvirt should do better sanity checking when reusing external files as a destination
• BZ - 1204006 - libvirt still try to setting vcpus for offline domain
• BZ - 1204017 - vm deadlock if do setvcpus failed
• BZ - 1204033 - libvirt ignore the --maximum option when use setvcpus only with --maximum
• BZ - 1205045 - Command net-dhcp-leases enhancement
• BZ - 1206114 - add an event on device attach
• BZ - 1206365 - Live Merge: Active layer merge is not properly synchronized with vdsm
• BZ - 1206406 - blockcopy to a gluster volume calls drive-mirror with wrong parameters
• BZ - 1206479 - libvirt should check the --granularity value if it is power of 2
• BZ - 1206521 - 'pool-info' get wrong allocation and available value in disk pool
• BZ - 1206987 - virsh blockcopy command option --bandwidth has a overflow issue
• BZ - 1207043 - Error prompt is incorrect when set the memory statistics polling interval more than its maximum in virsh
• BZ - 1207122 - Wrong speed show from blockjob while set bandwidth to 1 when do blockcopy
• BZ - 1207257 - changing the pinning with virsh setvcpupin does not work
• BZ - 1207937 - numa settings disapear after restart libvirtd
• BZ - 1208009 - worldwide name (WWN) for storage need to be uniquely identifiable
• BZ - 1208176 - Race starting multiple libvirtd user sessions at the same time
• BZ - 1208434 - guest will disappear when use vcpupin set a non exist cpu then restart libvirtd
• BZ - 1208763 - virsh pool-create-as cannot ether recognise nor handle relative path
• BZ - 1209312 - virsh domifaddr cannot get any output in quiet mode
• BZ - 1209394 - domstats cannot be used when do not add any option
• BZ - 1209813 - libvirtd crashes after memory device hot-plug crashes qemu
• BZ - 1210159 - domcapabilities failes for --arch ppc64le --emulatorbin /usr/bin/qemu-system-ppc64
• BZ - 1210352 - RFE: Provide a way to specify which disks are block copied during migration
• BZ - 1210545 - libvirtd crashed when define/edit a vm with a vcpus='0, ^0' in <vcpusched>
• BZ - 1210650 - Redirecting usb device cannot be found in guest after reboot guest when specify redirfilter version='2.01'
• BZ - 1210669 - virt-xml-validate should post error when guest xml configured with "disk type='file' device='lun'"
• BZ - 1211436 - non-root libvirtd crashed when do nwfilter-list in user mode
• BZ - 1211548 - memtune settings in running vm xml will disappear after restart libvirtd
• BZ - 1211550 - weird error report when fail to parse parameter --soft-limit of memtune
• BZ - 1211758 - The VF is failed to be used in macvtap-passthrough network if it has been used in hostdev network
• BZ - 1211938 - libvirt requires rtc-reset-reinjection command in qemu
• BZ - 1212077 - Add support for QMP event notification when migration finishes
• BZ - 1213345 - Virsh support connect esxi 6.0 hypervisor.
• BZ - 1213434 - Provide more usable downtime statistics without requiring NTP
• BZ - 1213698 - lxc vm failed to start when set numatune in vm
• BZ - 1215569 - libvirtd crash when do blockcopy with "--shallow" option while guest source disk has no backing file
• BZ - 1216046 - guest which cold-plug too much memory device will disappear after restart libvirt
• BZ - 1218145 - vm deadlock when deleting a nonexistent iothread with --config
• BZ - 1218577 - iothreaddel can make a vm have broken settings which will make vm lose track after restart libvirtd
• BZ - 1219191 - Regression: libvirt-1.2.15-1.el7 adds -cpu qemu32 to command line when no <cpu> or os/@arch is specified
• BZ - 1220195 - Assign virtio-serial addresses after coldplugging a device
• BZ - 1220213 - vol-resize with --delta --shrink does not shrink the volume
• BZ - 1220265 - libvirt format a (null) in ./devices/shmem/msi[@ioeventfd] when pass a invalid ioeventfd
• BZ - 1220809 - libvirtd crashed when attaching an RNG device failed
• BZ - 1221047 - 'virsh numatune DomName' shows incorrect numatune node set
• BZ - 1221504 - 2 corner issue around memory device
• BZ - 1223177 - Metadata preallocation should not be supported for rbd based volumes
• BZ - 1223631 - smbios, sysinfo, idmap, metadata will lose if we set a memory device in the xml
• BZ - 1223688 - virt-xml-validate should accept both DHCPv4 and static IPv4 addresses concurrently
• BZ - 1224018 - The disk pool alloc information are wrong after the new volume created
• BZ - 1224053 - blkdeviotune unable to get block I/O throttle parameters
• BZ - 1224088 - Using "pool-create-as" to create a scsi pool with wwnn&wwpn has redundant xml check.
• BZ - 1224233 - When a FC storage attached to a scsi (HBA or vHBA) with target_number!=0, the FC storage pool cannot display it with "virsh vol-list <poolName>"
• BZ - 1224587 - Improve error report for virsh allocpages command
• BZ - 1225694 - Disk partition table is broken after wiping an extended partition
• BZ - 1226234 - No audit log when start a vm with memory device/hot-plug a memory device
• BZ - 1226849 - A copy and paste error in virsh's handler for that tray-change event
• BZ - 1226854 - automatically generated path for a unix channel contains "(null)"
• BZ - 1227180 - "virsh emulatorpin <domain>" doesn't get the updated cpulist after the cpulist changes to "0-7" from "0-6"(on a host with cpu number is multiple of 8).
• BZ - 1227551 - [blockcommit]Wrong blockcommit process with gluster based disk when the network connection was broken
• BZ - 1227555 - libvirt release the RNG device address on successful RNG attach
• BZ - 1227558 - No audit log when start a vm with iothreads
• BZ - 1227664 - Wrong type for dir type volume causes a failure when doing vol-delete
• BZ - 1228007 - Using virsh attach-device fail to hotplug iscsi or fc lun volume with --config/--persistent option
• BZ - 1229199 - Expose typed parameter names in libvirt-api.xml
• BZ - 1229592 - change-media with option update cannot eject cdrom as it always requires new source when device has source
• BZ - 1229666 - machine type capabilities are missing the canonical names of default types
• BZ - 1230039 - cannot attach a virtio channel device
• BZ - 1230137 - pool-build a nfs pool will prompt unclear error when target dir exists
• BZ - 1230664 - mpath checkPool using wrong check method
• BZ - 1232606 - Libvirt should forbid to create duplicate mpath pool
• BZ - 1232663 - cannot change the nodeset if we do not set the numatune in guest xml
• BZ - 1232880 - network device feature flags are not updated in nodedev-dumpxml output, out of date cached values are returned instead
• BZ - 1234686 - need a address conflicts check for dimm address type
• BZ - 1234729 - guest will have broken settings if we do not specify scheduler in iothreadsched element
• BZ - 1235116 - guest will have broken settings if we set a zero priority and scheduler is fifo or rr in iothreadsched element
• BZ - 1236438 - Some source conflict issues for gluster pool
• BZ - 1236496 - Libvirt doesn't keep disk mirror state synchronization with qemu
• BZ - 1236507 - error not correct when use console cmd to open a guest which guest console type is not pty
• BZ - 1236585 - [libvirt][events] SPICE Graphic events are missing the port of remote/local connections in the 'service' field
• BZ - 1236924 - "Guest agent disappeared while executing command" after logged into the graphical desktop of the guest.
• BZ - 1238153 - guest job locked after OpenGraphics fail because qemu have been killed
• BZ - 1238338 - libvirt is overly restrictive with bus type and hotplug requirements on q35 QEMU machine
• BZ - 1238570 - Libvirt cannot get resource info after restart libvirtd if use custom partitions
• BZ - 1238589 - iothreadinfo cannot be used
• BZ - 1238610 - 'dir' type pool couldn't autostart while disable the autostart flag
• BZ - 1240283 - virDomainCreateXML fails with Cannot write data: Broken pipe
• BZ - 1240979 - error not correct when hot-plug/unplug a vcpu via agent to a offline domain
• BZ - 1241355 - libvirt output an unknown error when use blockjob check a not exist disk path
• BZ - 1241454 - Underlying file was not removed when volume create/build fails
• BZ - 1242904 - migration: Cancelling triggers guest IO errors
• BZ - 1242940 - balloon size is incorrect after restore/migration
• BZ - 1244080 - Fail to create dir pool from virt-manager when the target path already exist
• BZ - 1244664 - guest cannot start when set numatune and disable cpuset in qemu.conf
• BZ - 1245004 - VFIO device hotplug fails and dumpxml does not update for hot unplug
• BZ - 1247087 - Setting keepalive_required option will refuse all the client connections.
• BZ - 1248350 - Guest with maxMemory setting hangs after migration from RHEL7.2 to RHEL7.1
• BZ - 1249006 - Guest fail to start while the guest's memory isn't aligned to 256 MB
• BZ - 1249587 - "migrate --copy-storage-inc" doesn't handle the image backing file
• BZ - 1250977 - Improve ppc64 CPU driver
• BZ - 1250982 - libvirt reports physical=0 for COW2 volumes on block storage
• BZ - 1251886 - virDomainAddIOThread allow add iothread 0 which make guest have a broken settings
• BZ - 1251927 - The cpu model between managedsave XML and original XML is inconsistent.
• BZ - 1252363 - internal error: Cannot find suitable CPU model for given data
• BZ - 1252473 - Libvirt crashed on virsh domiftune
• BZ - 1252685 - Migration from RHEL6 to RHEL7 failed when set memory size != total_of_numa_memory.
• BZ - 1253108 - Attach-disk should forbid "--iothread = 0 "
• BZ - 1254044 - Libvirt uses incorrect default network card model for PPC64 guests
• BZ - 1254420 - Add IvyBridge cpu model to libvirt
• BZ - 1256486 - NetXtreme II BCM5709 - device is behind a switch lacking ACS
• BZ - 1257004 - use ioctl(SIOC[GS]IFHWADDR) to save/set MAC address of macvtap passthrough physdevs with an 802.1Qbh port profile
• BZ - 1258361 - Libvirtd crash when attach-disk with an unsupported disk address ccw
• BZ - 1260753 - 'virsh domcapabilities' fails for ppc64le
• BZ - 1260846 - libvirtd crash when define a guest which numa cell id is out of order
• BZ - 1261708 - Guest gets paused after unplugging a PCI device
• BZ - 1262399 - disk backend is not removed properly when disk frontent hotplug fails
• BZ - 1265111 - migration from libvirt 1.2.17 fails with "graphics listen attribute $IP must match address attribute of first listen element (found none)"
• BZ - 1265902 - Guest OS paused after migration
• BZ - 1266856 - Migration from 7.0 to 7.2 failed with numa+hugepage settings.
• BZ - 1267154 - libvirt tries to change ownership of ISOs even though dynamic_ownership is set to 0
• BZ - 1267882 - Can't create ppc64 guests on a ppc64le host

CVEs

(none)

References

• http://www.redhat.com/security/updates/classification/#normal