Qlogic driver reports 'Failed mbx[0]=4005, ... cmd=31' errors
Issue
-
Qlogic driver shows following error messages while booting up the system, although there were no issues observed while accessing any SAN devices. Does this error messages indicates any issue with SAN/Storage? is this a bug?
Jul 01 01:41:55 host1 kernel: qla2xxx [0000:11:00.0]-1020:3: **** Failed mbx[0]=4005, mb[1]=40, mb[2]=0, mb[3]=0, cmd=31 ****. Jul 01 01:41:56 host1 kernel: qla2xxx [0000:11:00.1]-1020:4: **** Failed mbx[0]=4005, mb[1]=40, mb[2]=0, mb[3]=0, cmd=31 ****. Jul 01 01:41:57 host1 kernel: qla2xxx [0000:0b:00.0]-1020:5: **** Failed mbx[0]=4005, mb[1]=40, mb[2]=0, mb[3]=0, cmd=31 ****. Jul 01 01:41:57 host1 kernel: qla2xxx [0000:0b:00.1]-1020:6: **** Failed mbx[0]=4005, mb[1]=40, mb[2]=0, mb[3]=0, cmd=31 ****. [...]
Environment
- Red Hat Enterprise Linux 6.4, kernel 2.6.32-358.14.1.el6 or later
- Red Hat Enterprise Linux 5.7, kernel 2.6.18-274.12.1.el5 or later
- QLogic HBA (including following models):
- QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)
- QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 03)
Subscriber exclusive content
A Red Hat subscription provides unlimited access to our knowledgebase, tools, and much more.
