NIC Bonding 802.3 AD

Latest response

Would like to ask for your kind expertise please. Currently one of our servers is configure to have a bond of 802.3AD for ports eno1 and eno2. What we are expecting is that the traffic will flow for those ports but it doesn't work.

Actual Traffic flow via sar - n DEV 1 command

Traffic Flow

Here are the ports equivalent to the connected ports on switch

GigabitEthernet 0/0/8 = eno1
GigabitEthernet 0/0/17 = eno2

Switch Configuration
Switch Configuration

bond0 Configuration File

[root@RHEL-TEST-MA ~]# cat /proc/net/bonding/bond0
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)

Bonding Mode: IEEE 802.3ad Dynamic link aggregation
Transmit Hash Policy: layer2+3 (2)
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0
Peer Notification Delay (ms): 0

802.3ad info
LACP active: on
LACP rate: slow
Min links: 0
Aggregator selection policy (ad_select): stable
System priority: 65535
System MAC address: 7c:d3:0a:6a:1b:a0
Active Aggregator Info:
Aggregator ID: 1
Number of ports: 2
Actor Key: 9
Partner Key: 2097
Partner Mac Address: d4:4f:67:07:54:b0

Slave Interface: eno1
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 1
Permanent HW addr: 7c:d3:0a:6a:1b:a0
Slave queue ID: 0
Aggregator ID: 1
Actor Churn State: none
Partner Churn State: none
Actor Churned Count: 0
Partner Churned Count: 0
details actor lacp pdu:
system priority: 65535
system mac address: 7c:d3:0a:6a:1b:a0
port key: 9
port priority: 255
port number: 1
port state: 61
details partner lacp pdu:
system priority: 32768
system mac address: d4:4f:67:07:54:b0
oper key: 2097
port priority: 100
port number: 9
port state: 61

Slave Interface: eno2
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 7c:d3:0a:6a:1b:a1
Slave queue ID: 0
Aggregator ID: 1
Actor Churn State: none
Partner Churn State: none
Actor Churned Count: 0
Partner Churned Count: 0
details actor lacp pdu:
system priority: 65535
system mac address: 7c:d3:0a:6a:1b:a0
port key: 9
port priority: 255
port number: 2
port state: 61
details partner lacp pdu:
system priority: 32768
system mac address: d4:4f:67:07:54:b0
oper key: 2097
port priority: 100
port number: 10
port state: 61

RHEL Ports
RHEL Ports

RHEL Ports Configuration

Ports Configuration

CL

Responses