multipath iSCSI storage domain

I have created an iSCSI target that has access from 2 networks: 20.249.6.0 and 30.249.6.0.   On the RHEV host, I have setup multipath to access this disk in a round-robin fashion, using friendly name "blue":

# multipath -l
blue (188424d93-8676-425d-9c63) dm-0 Perrier,VIRTUAL-DISK
size=198G features='0' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=0 status=active
| `- 10:0:0:1 sdb 8:16 active undef running
`-+- policy='round-robin 0' prio=0 status=enabled
  `- 9:0:0:1  sdc 8:32 active undef running

This disk was handed to the datacenter as a data/iSCSI domain.  I checked both paths in the New Domain dialog box, see attachment.

I believe that both paths are being used when I create VMs on this disk.

Is this the correct way to implement multipath in RHEV?

I preferred to not use NIC bonding, because of past difficulties getting the NetAdmin to adjust Cisco properties on the core switch.
 

Please advise.