RHEL 6.4 does not boot on IBM HS22 blade with IBM SAS SSD

Issue

• RHEL 6.4 does not boot on IBM HS22 blade with IBM SAS SSD
• Using SATA hard drives and SATA SSDs works fine
• When installing from DVD or kickstarting, the installer hangs after partitioning but before package installation
• When cloning from a working SATA system, the following errors appear:

[  289.294814] mptbase: ioc0: LogInfo(0x31140000): Originator={PL}, Code={IO Executed}, SubCode(0x0000) cb_idx mptscsih_io_done
[  289.306214] LSI Debug log info 31140000 for channel 0 id 5
[  289.311834] mptscsih: ioc0: task abort: SUCCESS (rv=2002) (sc=ffff880c75ba1c80)
[  289.319420] mptscsih: ioc0: attempting target reset! (sc=ffff880c75ba1c80)
[  289.326421] sd 0:0:0:0: [sda] CDB: Write same(16): 93 08 00 00 00 00 00 08 08 08 00 7f ff f8 00 00
[  289.793654] mptscsih: ioc0: target reset: SUCCESS (sc=ffff880c75ba1c80)
[  320.193472] mptscsih: ioc0: attempting task abort! (sc=ffff880c73e47080)
[  320.200298] sd 0:0:0:0: [sda] CDB: Write same(16): 93 08 00 00 00 00 00 88 08 00 00 7f ff f8 00 00
[  324.454632] mptbase: ioc0: LogInfo(0x31140000): Originator={PL}, Code={IO Executed}, SubCode(0x0000) cb_idx mptscsih_io_done
[  324.466034] LSI Debug log info 31140000 for channel 0 id 5
[  324.471647] mptscsih: ioc0: task abort: SUCCESS (rv=2002) (sc=ffff880c73e47080)
[  324.479136] mptscsih: ioc0: attempting task abort! (sc=ffff880c75ba1c80)
[  324.485961] sd 0:0:0:0: [sda] CDB: Write same(16): 93 08 00 00 00 00 00 08 08 08 00 7f ff f8 00 00
[  328.943247] mptbase: ioc0: LogInfo(0x31140000): Originator={PL}, Code={IO Executed}, SubCode(0x0000) cb_idx mptscsih_io_done
[  328.954637] LSI Debug log info 31140000 for channel 0 id 5