QLogic FastLinQ CNA NIC prints messages about qed qede qedf qedr

Solution Verified - Updated -

Issue

  • QLogic FastLinQ CNA NIC prints messages about qed qede qedf qedr
  • The following block of messages is printed on boot:
[    3.940863] QLogic FastLinQ 4xxxx Core Module qed 8.33.0.20
[    3.948889] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.33.0.20
[    3.962470] [0000:00:00.0]:[qedf_init:3595]: QLogic FCoE Offload Driver v8.33.0.20.
[    3.970187] [qed_rdma_set_pf_params:2078()]Current day drivers don't support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only

[    4.189124] [qed_mcp_handle_events:1674(sp-0-5d:00.00)]Received an MFW message indication but no new message!
[    4.207846] [qed_dbg_parse_attn:7533(eth1-0)]nig (Interrupt) : address_error [address 0x00500040, bit 0]
[    4.207849] [qed_dbg_parse_attn:7533(eth1-0)]nig (Interrupt) : p2_tx_pause_too_long_int [address 0x005000b0, bit 0] [masked]
[    4.207851] [qed_dbg_parse_attn:7533(eth1-0)]nig (Interrupt) : p3_tx_pause_too_long_int [address 0x005000d0, bit 0] [masked]
[    4.208123] qede 5d:00.00: Storm FW 8.33.11.0, Management FW 8.35.29.0 [MBI 8.35.43] [eth1]

[    4.254491] [0000:5d:00.2]:[__qedf_probe:3014]:17: QLogic FastLinQ FCoE Module qedf 8.33.0.20, FW 8.33.11.0
[    4.254498] [0000:5d:00.2]:[__qedf_probe:3031]:17: qedf->io_mempool=ffff9dd0fdb5b540.

[    4.289285] [0000:5d:00.2]:[qedf_dcbx_handler:545]:17: DCBx event valid=0 enabled=0 fcoe prio=0.
[    4.316111] [0000:5d:00.2]:[qedf_link_update:517]:17: LINK DOWN.

[   13.597412] qedr: discovered and registered 2 RDMA funcs
[   16.909039] [0000:5d:00.2]:[qedf_link_update:517]:17: LINK DOWN.
  • The following block of messages is printed when sosreport runs:
[ 1095.238546] [0000:5d:00.2]:[qedf_sysfs_read_grcdump:115]:17: GRC Dump not captured!
[ 1095.276716] [0000:5d:00.3]:[qedf_sysfs_read_grcdump:115]:18: GRC Dump not captured!

[ 1101.102517] [qed_dbg_dump:7695(eth3)]Collecting a debug feature ["idle_chk"]
[ 1101.109031] [qed_dbg_dump:7695(eth3)]Collecting a debug feature ["idle_chk"]
[ 1101.115518] [qed_dbg_dump:7695(eth3)]Collecting a debug feature ["reg_fifo"]
[ 1101.115576] [qed_dbg_dump:7695(eth3)]Collecting a debug feature ["igu_fifo"]
[ 1101.115599] [qed_dbg_dump:7695(eth3)]Collecting a debug feature ["protection_override"]
[ 1101.115662] [qed_dbg_dump:7695(eth3)]Collecting a debug feature ["fw_asserts"]
[ 1101.115831] [qed_dbg_dump:7695(eth3)]Collecting a debug feature ["grc"]
[ 1101.344355] [qed_dbg_dump:7695(eth3)]Collecting a debug feature ["mcp_trace"]
[ 1101.423800] [qed_dbg_nvm_image:7815(eth3)]Collecting a debug feature ["nvram image 2"]
[ 1101.430061] [qed_dbg_nvm_image:7815(eth3)]Collecting a debug feature ["nvram image 3"]
[ 1101.436060] [qed_dbg_nvm_image:7815(eth3)]Collecting a debug feature ["nvram image 4"]
[ 1101.801153] [qed_get_coalesce:2828(eth3-0)]Unable to read queue coalescing

Environment

  • Red Hat Enterprise Linux 7.6 (kernel-3.10.0-957.1.3.el7) and later
  • QLogic Corp FastLinQ QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)

Subscriber exclusive content

A Red Hat subscription provides unlimited access to our knowledgebase, tools, and much more.

Current Customers and Partners

Log in for full access

Log In

New to Red Hat?

Learn more about Red Hat subscriptions

Using a Red Hat product through a public cloud?

How to access this content