Unable to generate vmcore on HP ProLiant XL450 Gen9 Server
Issue
-
Unable to generate VMCORE on ProLiant XL450 Gen9 Server
-
While generating vmcore, system is stuck at below point.
hpsa xxxx:xx:xx.x: board ready after hard reset.
hpsa xxxx:xx:xx.x: Waiting for controller to respond to no-op
OR
[ 5.210612] Request for unknown module key 'Hewlett-Packard Company: HP UEFI Secure Boot 2013 DB key: *************************' err -11
[ 20.652051] hpsa 0000:04:00.0: board ready after hard reset.
[ 20.654279] hpsa 0000:04:00.0: Waiting for controller to respond to no-op
[ 60.659770] hpsa 0000:04:00.0: controller message 03:00 succeeded
[ 60.662161] hpsa 0000:04:00.0: MSI-X capable controller
[ 60.664278] hpsa 0000:04:00.0: Using 1 reply queue(s)
[ 60.666249] Physical aborts supported: yes
[ 60.667738] Logical aborts supported: no
[ 60.669168] HP SSD Smart Path aborts supported: yes
[ 60.681775] hpsa 0000:04:00.0: hpsa0: <0x3239> at IRQ 67 using DAC
[ 60.694764] bft2_offset = 0x8f4
[ 60.707162] scsi host0: hpsa
[ 60.710865] hpsa 0000:08:00.0: using doorbell to reset controller
[ 60.835449] hpsa 0000:04:00.0: added scsi 0:0:0:0: RAID HP H244br controller SSDSmartPathCap- En- Exp=1 qd=32
[ 60.840211] hpsa 0000:04:00.0: added scsi 0:0:1:0: Direct-Access HP EG0900JFCKB PHYS DRV SSDSmartPathCap- En- Exp=0 qd=58
[ 60.844753] hpsa 0000:04:00.0: added scsi 0:0:2:0: Direct-Access HP EG0900JFCKB PHYS DRV SSDSmartPathCap- En- Exp=0 qd=58
[ 60.849326] hpsa 0000:04:00.0: added scsi 0:1:0:0: Direct-Access HP LOGICAL VOLUME RAID-1(1+0) SSDSmartPathCap- En- Exp=1 qd=32
[ 60.863775] scsi 0:0:0:0: RAID HP H244br 4.58 PQ: 0 ANSI: 5
[ 60.869838] scsi 0:1:0:0: Direct-Access HP LOGICAL VOLUME 4.58 PQ: 0 ANSI: 5
Environment
- Red Hat Enterprise Linux 7
Subscriber exclusive content
A Red Hat subscription provides unlimited access to our knowledgebase of over 48,000 articles and solutions.
Welcome! Check out the Getting Started with Red Hat page for quick tours and guides for common tasks.
