The qlcnic driver reset network connnection

Solution Unverified - Updated -

Issue

  • Messages found in /var/log/messages and/or dmesg after a network outage
net eth13: Device temperature is now 92 degrees C in normal range.
net eth14: Device temperature is now 92 degrees C in normal range.
net eth13: Device temperature 102 degrees C exceeds operating range. Immediate action needed.
net eth14: Device temperature 102 degrees C exceeds operating range. Immediate action needed.
net eth13: Device temperature is now 92 degrees C in normal range.
net eth14: Device temperature is now 92 degrees C in normal range.
net eth14: Device temperature 102 degrees C exceeds operating range. Immediate action needed.
net eth13: Device temperature 102 degrees C exceeds operating range. Immediate action needed.
net eth13: Device temperature is now 92 degrees C in normal range.
net eth14: Device temperature is now 92 degrees C in normal range.
net eth14: Device temperature 102 degrees C exceeds operating range. Immediate action needed.
net eth13: Device temperature 102 degrees C exceeds operating range. Immediate action needed.
net eth14: Device temperature is now 92 degrees C in normal range.
net eth13: Device temperature is now 92 degrees C in normal range.
net eth13: Device temperature 102 degrees C exceeds operating range. Immediate action needed.
net eth14: Device temperature 102 degrees C exceeds operating range. Immediate action needed.
net eth14: Device temperature is now 92 degrees C in normal range.
net eth13: Device temperature is now 92 degrees C in normal range.
net eth13: Device temperature 102 degrees C exceeds operating range. Immediate action needed.
net eth14: Device temperature 102 degrees C exceeds operating range. Immediate action needed.
net eth13: Device temperature 108 degrees C exceeds maximum allowed. Hardware has been shut down.
net eth14: Device temperature 108 degrees C exceeds maximum allowed. Hardware has been shut down.
qlcnic 0000:a7:00.0: command timeout, response = 0x3
qlcnic 0000:a7:00.0: Failed to destroy rx ctx in firmware
qlcnic 0000:a7:00.0: command timeout, response = 0x3
qlcnic 0000:a7:00.0: Failed to destroy tx ctx in firmware
qlcnic 0000:a7:00.0: command timeout, response = 0x3
qlcnic 0000:a7:00.0: Failed to destroy tx ctx in firmware
qlcnic 0000:a7:00.0: command timeout, response = 0x3
qlcnic 0000:a7:00.0: Failed to destroy tx ctx in firmware
qlcnic 0000:a7:00.0: command timeout, response = 0x3
qlcnic 0000:a7:00.0: Failed to destroy tx ctx in firmware
qlcnic 0000:a7:00.0: command timeout, response = 0x3
qlcnic 0000:a7:00.0: eth13: Failed to Delete interrupts 17
qlcnic 0000:a7:00.0: Detaching the device: peg halt status1=0x80001303
qlcnic 0000:a7:00.1: command timeout, response = 0x3
qlcnic 0000:a7:00.1: Failed to destroy rx ctx in firmware
qlcnic 0000:a7:00.0: Device state set to Failed. Please Reboot
qlcnic 0000:a7:00.1: command timeout, response = 0x3
qlcnic 0000:a7:00.1: Failed to destroy tx ctx in firmware
qlcnic 0000:a7:00.1: command timeout, response = 0x3
qlcnic 0000:a7:00.1: Failed to destroy tx ctx in firmware
qlcnic 0000:a7:00.1: command timeout, response = 0x3
qlcnic 0000:a7:00.1: Failed to destroy tx ctx in firmware
qlcnic 0000:a7:00.1: command timeout, response = 0x3
qlcnic 0000:a7:00.1: Failed to destroy tx ctx in firmware
qlcnic 0000:a7:00.1: command timeout, response = 0x3
qlcnic 0000:a7:00.1: eth14: Failed to Delete interrupts 17
qlcnic 0000:a7:00.1: Detaching the device: peg halt status1=0x80001303
qlcnic 0000:a7:00.1: Device state set to Failed. Please Reboot

Environment

-Red Hat Enterprise Linux 6.8

Subscriber exclusive content

A Red Hat subscription provides unlimited access to our knowledgebase of over 48,000 articles and solutions.

Current Customers and Partners

Log in for full access

Log In
Close

Welcome! Check out the Getting Started with Red Hat page for quick tours and guides for common tasks.