Issue

• bnx2x driver logs "Parity errors detected" then reset takes a long time

kernel: bnx2x 0000:02:00.0: eth0: Parity errors detected in blocks: SEARCHER [0x00000001]
kernel: bnx2x 0000:02:00.1: eth1: Parity errors detected in blocks: SEARCHER [0x00000001]
kernel: bnx2x: [bnx2x_stats_comp:211(eth0)]timeout waiting for stats finished
kernel: bnx2x: [bnx2x_clean_tx_queue:1242(eth0)]timeout waiting for queue[0]: txdata->tx_pkt_prod(26009) != txdata->tx_pkt_cons(26008)
kernel: bnx2x: [bnx2x_clean_tx_queue:1242(eth0)]timeout waiting for queue[1]: txdata->tx_pkt_prod(61166) != txdata->tx_pkt_cons(61163)
kernel: bnx2x: [bnx2x_clean_tx_queue:1242(eth0)]timeout waiting for queue[2]: txdata->tx_pkt_prod(22818) != txdata->tx_pkt_cons(22815)
kernel: bnx2x: [bnx2x_clean_tx_queue:1242(eth0)]timeout waiting for queue[3]: txdata->tx_pkt_prod(38085) != txdata->tx_pkt_cons(38082)
kernel: bnx2x: [bnx2x_clean_tx_queue:1242(eth0)]timeout waiting for queue[5]: txdata->tx_pkt_prod(61110) != txdata->tx_pkt_cons(61108)
kernel: bnx2x: [bnx2x_clean_tx_queue:1242(eth0)]timeout waiting for queue[6]: txdata->tx_pkt_prod(22640) != txdata->tx_pkt_cons(22638)
kernel: bnx2x: [bnx2x_clean_tx_queue:1242(eth0)]timeout waiting for queue[7]: txdata->tx_pkt_prod(8444) != txdata->tx_pkt_cons(8442)
kernel: bnx2x: [bnx2x_stats_comp:211(eth1)]timeout waiting for stats finished
kernel: bnx2x: [bnx2x_stats_comp:211(eth1)]timeout waiting for stats finished
kernel: bnx2x: [bnx2x_clean_tx_queue:1242(eth1)]timeout waiting for queue[7]: txdata->tx_pkt_prod(31359) != txdata->tx_pkt_cons(31356)
kernel: bnx2x 0000:02:00.0: eth0: using MSI-X  IRQs: sp 57  fp[0] 59 ... fp[7] 66
kernel: bnx2x 0000:02:00.1: eth1: using MSI-X  IRQs: sp 67  fp[0] 69 ... fp[7] 76
kernel: bnx2x 0000:02:00.0: eth0: NIC Link is Up, 10000 Mbps full duplex, Flow control: none
kernel: bnx2x 0000:02:00.1: eth1: NIC Link is Up, 10000 Mbps full duplex, Flow control: none