Cluster controlled LVM resource fails a status check during lvconvert activity

Issue

• The cluster service encountered a failure and it was marked as failed then one of the lvm resource used by this service was converted from linear to mirror using following command:

  $ lvconvert -m1  /dev/vg01/lv0
  

  Therre were following error messages observed in /var/log/messages file at the time of service failure:

  Jan 15 10:42:07 node1 kernel: device-mapper: table: device 253:97 too small for target
  Jan 15 10:42:07 node1 kernel: device-mapper: table: 253:154: linear: dm-linear: Device lookup failed
  Jan 15 10:42:07 node1 kernel: device-mapper: ioctl: error adding target to table
  [...]
  Jan 15 11:05:43 node1 clurgmgrd: [9145]: <err> Symbolic link for  is not present 
  Jan 15 11:05:43 node1 clurgmgrd[9145]: <notice> status on lvm "vg01" returned 1 (generic error) 
  Jan 15 11:05:44 node1 clurgmgrd[9145]: <notice> Stopping service service:service1 
  Jan 15 11:05:44 node1 logger: SOEUNIX SOE3ROOT=/orapresthl1/soe3 : STOP : Stopping 
  [...]
  Jan 15 11:08:01 node1 clurgmgrd: [9145]: <err> Logical volume vg01/ failed to shutdown 
  Jan 15 11:08:01 node1 clurgmgrd[9145]: <notice> stop on lvm "vg01" returned 1 (generic error) 
  Jan 15 11:08:01 node1 clurgmgrd[9145]: <crit> #12: RG service:service1 failed to stop; intervention required 
  Jan 15 11:08:01 node1 clurgmgrd[9145]: <notice> Service service:service1 is failed
  [...]