bnx2 driver outputs a firmware dump in the messages file.

Issue

• Following messeges were observed on the server

Jan 16 11:17:33 server1 kernel: do_IRQ: 2.77 No irq handler for vector (irq -1)  
Jan 16 11:17:43 server1 kernel: bnx2 0000:03:00.0: eth0: DEBUG: intr\_sem[0] PCI\_CMD[00100446]  
Jan 16 11:17:43 server1 kernel: bnx2 0000:03:00.0: eth0: DEBUG: PCI\_PM[19002008] PCI\_MISC_CFG[92000088]  
Jan 16 11:17:43 server1 kernel: bnx2 0000:03:00.0: eth0: DEBUG: EMAC\_TX\_STATUS[00000008] EMAC\_RX\_STATUS[00000000]  
Jan 16 11:17:43 server1 kernel: bnx2 0000:03:00.0: eth0: DEBUG: RPM\_MGMT\_PKT_CTRL[40000088]  
Jan 16 11:17:43 server1 kernel: bnx2 0000:03:00.0: eth0: DEBUG: HC\_STATS\_INTERRUPT_STATUS[017f0080]  
Jan 16 11:17:43 server1 kernel: bnx2 0000:03:00.0: eth0: DEBUG: PBA[00000000]  
Jan 16 11:17:43 server1 kernel: bnx2 0000:03:00.0: eth0: <\--- start MCP states dump \--->  
Jan 16 11:17:43 server1 kernel: bnx2 0000:03:00.0: eth0: DEBUG: MCP\_STATE\_P0[0003610e] MCP\_STATE\_P1[0003610e]  
Jan 16 11:17:43 server1 kernel: bnx2 0000:03:00.0: eth0: DEBUG: MCP mode[0000b880] state[80000000] evt_mask[00000500]  
Jan 16 11:17:43 server1 kernel: bnx2 0000:03:00.0: eth0: DEBUG: pc[0800aeb8] pc[0800ad38] instr[2404fbff]  
Jan 16 11:17:43 server1 kernel: bnx2 0000:03:00.0: eth0: DEBUG: shmem states:  
Jan 16 11:17:43 server1 kernel: bnx2 0000:03:00.0: eth0: DEBUG: drv\_mb[01030018] fw\_mb[00000018] link\_status[0000006f] drv\_pulse_mb[00005476]  
Jan 16 11:17:43 server1 kernel: bnx2 0000:03:00.0: eth0: DEBUG: dev\_info\_signature[44564903] reset_type[01005254] condition[0003610e]  
Jan 16 11:17:43 server1 kernel: bnx2 0000:03:00.0: eth0: DEBUG: 000003cc: 44444444 44444444 44444444 00000a3c  
Jan 16 11:17:43 server1 kernel: bnx2 0000:03:00.0: eth0: DEBUG: 000003dc: 0ffeffff 0000ffff ffffffff ffffffff  
Jan 16 11:17:43 server1 kernel: bnx2 0000:03:00.0: eth0: DEBUG: 000003ec: 00000000 00000000 00000000 00000002  
Jan 16 11:17:43 server1 kernel: bnx2 0000:03:00.0: eth0: DEBUG: 0x3fc[0000ffff]  
Jan 16 11:17:43 server1 kernel: bnx2 0000:03:00.0: eth0: <\--- end MCP states dump \--->  
Jan 16 11:17:43 server1 kernel: bnx2 0000:03:00.0: eth0: NIC Copper Link is Down  
Jan 16 11:17:43 server1 NetworkManager[1884]: <info> (eth0): carrier now OFF (device state 8, deferring action for 4 seconds)  
Jan 16 11:17:46 server1 kernel: bnx2 0000:03:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex  
Jan 16 11:17:46 server1 NetworkManager[1884]: <info> (eth0): carrier now ON (device state 8)