Unable to create floating ip from routed provider network
Environment
- Red Hat Openstack Platform 16
Issue
- Unable to create floating ip from routed provider network.
Resolution
- Creating of floating IP on routed networks is not possible till writing of this KCS.
- RFE has been raised for it which is tracked in Bugzilla 1848474
Root Cause
- FIP on router network is not supported in OSP and configuring this would need additional features like BGP speaker outside the cloud.
- BGP speaker advertises route to BGP peers which are added to BGP speaker. Incorporating these features are planned to be included in future releases.
Diagnostic Steps
-
Creation of FIP from routed provider network using below steps throws the error as "Error while executing command: BadRequestException: 400, Unable to find any IP address on external network".
1. #openstack network create --enable --description "Test multisegment network" --mtu 1500 --external --provider-network-type vlan --provider-physical-network datacentre --provider-segment 2654 multisegment 2. #openstack network segment set --name segment1 $(openstack network segment list --network multisegment -c ID -f value) 3. #openstack network segment create --physical-network datacentre --segment 2655 --network-type vlan --network multisegment segment2 4. #openstack subnet create --subnet-range xx.xx.xx.xx/xx --no-dhcp --gateway xx.xx.xx.xx --ip-version 4 --network multisegment --network-segment segment1 --allocation-pool start=xx.xx.xx.xx,end=xx.xx.xx.xx --dns-nameserver xx.xx.xx.xx --dns-nameserver 192.168.1.201 --service-type 'network:floatingip' --service-type 'network:router_gateway' multisegment-subnet1 5. #openstack subnet create --subnet-range xx.xx.xx.xx/xx --no-dhcp --gateway xx.xx.xx.xx --ip-version 4 --network multisegment --network-segment segment2 --allocation-pool start=xx.xx.xx.xx,end=xx.xx.xx.xx --dns-nameserver xx.xx.xx.xx --dns-nameserver 192.168.2.201 --service-type 'network:floatingip' --service-type 'network:router_gateway' multisegment-subnet2 6. #openstack floating ip create multisegment Error while executing command: BadRequestException: 400, Unable to find any IP address on external network d68fa1f7-9d4d-4ad1-xxxxxxxxxxxxxxx6
This solution is part of Red Hat’s fast-track publication program, providing a huge library of solutions that Red Hat engineers have created while supporting our customers. To give you the knowledge you need the instant it becomes available, these articles may be presented in a raw and unedited form.
Comments