What components have not been certified for use with Red Hat Enterprise Linux in the Fujitsu PRIMERGY range of servers?
Updated -
Release Found: Red Hat Enterprise Linux 5.3 and earlier, Red Hat Enterprise Linux 4.8 and earlier
The following Config To Order components have not been tested on Red Hat Enterprise Linux 4 and Red Hat Enterprise Linux 5 during the hardware certification process:
-
Emulex LPe11000 Single Port Fibre Channel HBA Adaptor
-
Emulex LPe11002 Dual Port Fibre Channel HBA Adaptor
-
Emulex LPe1150 Single Port Fibre Channel HBA Adaptor
-
Intel Pro/1000 PF Single Port Server Adaptor
- DDS Gen6, 80 GB, 6 MB/s, half height, USB 2.0 Tape Drive
- DDS Gen6, 80 GB, 6 MB/s, half height, SCSI U160 Tape Drive
- LTO2HH Ultrium, 200 GB, 24 MB/s, half height, SCSI U160 Tape Drive
- LTO3HH Ultrium, 400 GB, 60 MB/s, half height, SCSI U320 Tape Drive
Use of these components in the following Fujitsu PRIMERGY servers is therefore not fully supported at this time:
- Fujitsu PRIMERGY TX100 S1
- Fujitsu PRIMERGY RX200 S5
- Fujitsu PRIMERGY TX200 S5
- Fujitsu PRIMERGY RX300 S5
- Fujitsu PRIMERGY TX300 S5
- Fujitsu PRIMERGY BX620 S5
For support enquiries regarding these components, please contact the vendor directly via http://ts.fujitsu.com
Comments