[qlogic] Firmware aborted with error code 0x00006700. Device is being reset.

Issue

Network interface getting reset with the following error in /var/log/messages:

Firmware aborted with error code 0x00006700. Device is being reset.

More detailed:

qlcnic 0000:87:00.1: Firmware aborted with error code 0x00006700. Device is being reset.
qlcnic 0000:87:00.0: Pause control frames disabled on all ports
qlcnic 0000:87:00.0: firmware hang detected
qlcnic 0000:87:00.0: Dumping hw/fw registers
PEG_HALT_STATUS1: 0x40006701, PEG_HALT_STATUS2: 0x5f51b0,
PEG_NET_0_PC: 0x61d75, PEG_NET_1_PC: 0x149,
PEG_NET_2_PC: 0x61e0b, PEG_NET_3_PC: 0x6305b,
PEG_NET_4_PC: 0x1d349
========================================================================================
qlcnic 0000:87:00.0: Driver v5.2.43, firmware v4.8.20
qlcnic 0000:87:00.0: CDRP invalid or unknown cmd received: 0x10.
qlcnic 0000:87:00.0: qlcnic_get_mac_stats: Get mac stats failed, err=16.
qlcnic 0000:87:00.1: CDRP invalid or unknown cmd received: 0x10.
qlcnic 0000:87:00.1: qlcnic_get_mac_stats: Get mac stats failed, err=16.
qlcnic 0000:84:00.1: CDRP invalid or unknown cmd received: 0x10.
qlcnic 0000:84:00.1: qlcnic_get_mac_stats: Get mac stats failed, err=16.
qlcnic 0000:84:00.0: CDRP invalid or unknown cmd received: 0x10.
qlcnic 0000:84:00.0: qlcnic_get_mac_stats: Get mac stats failed, err=16.