7.8. HCI Compute 节点的自定义 NIC heat 模板
以下示例是一个 heat 模板，其中包含 HCI Compute 裸机节点的 NIC 配置。
heat_template_version: rocky
description: >
Software Config to drive os-net-config to configure VLANs for the Compute role.
parameters:
ControlPlaneIp:
default: ''
description: IP address/subnet on the ctlplane network
type: string
ControlPlaneSubnetCidr:
default: ''
description: >
The subnet CIDR of the control plane network. (The parameter is
automatically resolved from the ctlplane subnet's cidr attribute.)
type: string
ControlPlaneDefaultRoute:
default: ''
description: The default route of the control plane network. (The parameter
is automatically resolved from the ctlplane subnet's gateway_ip attribute.)
type: string
ControlPlaneStaticRoutes:
default: []
description: >
Routes for the ctlplane network traffic.
JSON route e.g. [{'destination':'10.0.0.0/16', 'nexthop':'10.0.0.1'}]
Unless the default is changed, the parameter is automatically resolved
from the subnet host_routes attribute.
type: json
ControlPlaneMtu:
default: 1500
description: The maximum transmission unit (MTU) size(in bytes) that is
guaranteed to pass through the data path of the segments in the network.
(The parameter is automatically resolved from the ctlplane network's mtu attribute.)
type: number
StorageIpSubnet:
default: ''
description: IP address/subnet on the storage network
type: string
StorageNetworkVlanID:
default: 30
description: Vlan ID for the storage network traffic.
type: number
StorageMtu:
default: 1500
description: The maximum transmission unit (MTU) size(in bytes) that is
guaranteed to pass through the data path of the segments in the
Storage network.
type: number
StorageInterfaceRoutes:
default: []
description: >
Routes for the storage network traffic.
JSON route e.g. [{'destination':'10.0.0.0/16', 'nexthop':'10.0.0.1'}]
Unless the default is changed, the parameter is automatically resolved
from the subnet host_routes attribute.
type: json
StorageMgmtIpSubnet:
default: ''
description: IP address/subnet on the storage_mgmt network
type: string
StorageMgmtNetworkVlanID:
default: 40
description: Vlan ID for the storage_mgmt network traffic.
type: number
StorageMgmtMtu:
default: 1500
description: The maximum transmission unit (MTU) size(in bytes) that is
guaranteed to pass through the data path of the segments in the
StorageMgmt network.
type: number
StorageMgmtInterfaceRoutes:
default: []
description: >
Routes for the storage_mgmt network traffic.
JSON route e.g. [{'destination':'10.0.0.0/16', 'nexthop':'10.0.0.1'}]
Unless the default is changed, the parameter is automatically resolved
from the subnet host_routes attribute.
type: json
InternalApiIpSubnet:
default: ''
description: IP address/subnet on the internal_api network
type: string
InternalApiNetworkVlanID:
default: 20
description: Vlan ID for the internal_api network traffic.
type: number
InternalApiMtu:
default: 1500
description: The maximum transmission unit (MTU) size(in bytes) that is
guaranteed to pass through the data path of the segments in the
InternalApi network.
type: number
InternalApiInterfaceRoutes:
default: []
description: >
Routes for the internal_api network traffic.
JSON route e.g. [{'destination':'10.0.0.0/16', 'nexthop':'10.0.0.1'}]
Unless the default is changed, the parameter is automatically resolved
from the subnet host_routes attribute.
type: json
TenantIpSubnet:
default: ''
description: IP address/subnet on the tenant network
type: string
TenantNetworkVlanID:
default: 50
description: Vlan ID for the tenant network traffic.
type: number
TenantMtu:
default: 1500
description: The maximum transmission unit (MTU) size(in bytes) that is
guaranteed to pass through the data path of the segments in the
Tenant network.
type: number
TenantInterfaceRoutes:
default: []
description: >
Routes for the tenant network traffic.
JSON route e.g. [{'destination':'10.0.0.0/16', 'nexthop':'10.0.0.1'}]
Unless the default is changed, the parameter is automatically resolved
from the subnet host_routes attribute.
type: json
ExternalMtu:
default: 1500
description: The maximum transmission unit (MTU) size(in bytes) that is
guaranteed to pass through the data path of the segments in the
External network.
type: number
DnsServers: # Override this via parameter_defaults
default: []
description: >
DNS servers to use for the Overcloud (2 max for some implementations).
If not set the nameservers configured in the ctlplane subnet's
dns_nameservers attribute will be used.
type: comma_delimited_list
DnsSearchDomains: # Override this via parameter_defaults
default: []
description: A list of DNS search domains to be added (in order) to resolv.conf.
type: comma_delimited_list
resources:
MinViableMtu:
# This resource resolves the minimum viable MTU for interfaces, bonds and
# bridges that carry multiple VLANs. Each VLAN may have different MTU. The
# bridge, bond or interface must have an MTU to allow the VLAN with the
# largest MTU.
type: OS::Heat::Value
properties:
type: number
value:
yaql:
expression: $.data.max()
data:
- {get_param: ControlPlaneMtu}
- {get_param: StorageMtu}
- {get_param: StorageMgmtMtu}
- {get_param: InternalApiMtu}
- {get_param: TenantMtu}
- {get_param: ExternalMtu}
OsNetConfigImpl:
type: OS::Heat::SoftwareConfig
properties:
group: script
config:
str_replace:
template:
get_file: /usr/share/openstack-tripleo-heat-templates/network/scripts/run-os-net-config.sh
params:
$network_config:
network_config:
- type: interface
name: nic4
mtu:
get_attr: [MinViableMtu, value]
use_dhcp: false
dns_servers:
get_param: DnsServers
domain:
get_param: DnsSearchDomains
addresses:
- ip_netmask:
list_join:
- /
- - get_param: ControlPlaneIp
- get_param: ControlPlaneSubnetCidr
routes:
list_concat_unique:
- get_param: ControlPlaneStaticRoutes
- - default: true
next_hop:
get_param: ControlPlaneDefaultRoute
- type: vlan
mtu:
get_param: StorageMtu
device: nic4
vlan_id:
get_param: StorageNetworkVlanID
addresses:
- ip_netmask:
get_param: StorageIpSubnet
routes:
list_concat_unique:
- get_param: StorageInterfaceRoutes
- type: vlan
mtu:
get_param: InternalApiMtu
device: nic4
vlan_id:
get_param: InternalApiNetworkVlanID
addresses:
- ip_netmask:
get_param: InternalApiIpSubnet
routes:
list_concat_unique:
- get_param: InternalApiInterfaceRoutes
- type: ovs_bridge
# This will default to br-ex, anything else requires specific
# bridge mapping entries for it to be used.
name: bridge_name
mtu:
get_param: ExternalMtu
use_dhcp: false
members:
- type: interface
name: nic3
mtu:
get_param: ExternalMtu
use_dhcp: false
primary: true
- type: vlan
mtu:
get_param: TenantMtu
vlan_id:
get_param: TenantNetworkVlanID
addresses:
- ip_netmask:
get_param: TenantIpSubnet
routes:
list_concat_unique:
- get_param: TenantInterfaceRoutes
outputs:
OS::stack_id:
description: The OsNetConfigImpl resource.
value:
get_resource: OsNetConfigImpl此配置将网络映射到以下网桥和接口：
| 网络 | Bridge | interface |
|---|---|---|
| Control Plane, Storage, Internal API | N/A |
|
| 外部, Tenant |
|
|
注意
您可以修改此配置，以适应裸机节点的 NIC 配置。
要在部署中使用此模板，请将示例的内容复制到 workstation 上的 custom_templates 目录中的 net-config-two-nic-vlan-computehci.yaml 中。
