Chapter 35. flavor
This chapter describes the commands under the flavor
command.
35.1. flavor create
Create new flavor
Usage:
openstack flavor create [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--id <id>] [--ram <size-mb>] [--disk <size-gb>] [--ephemeral <size-gb>] [--swap <size-mb>] [--vcpus <vcpus>] [--rxtx-factor <factor>] [--public | --private] [--property <key=value>] [--project <project>] [--description <description>] [--project-domain <project-domain>] <flavor-name>
Table 35.1. Positional arguments
Value | Summary |
---|---|
<flavor-name> | New flavor name |
Table 35.2. Command arguments
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--id <id> | Unique flavor id |
--ram <size-mb> | Memory size in mb (default 256m) |
--disk <size-gb> | Disk size in gb (default 0g) |
--ephemeral <size-gb> | Ephemeral disk size in gb (default 0g) |
--swap <size-mb> | Additional swap space size in mb (default 0m) |
--vcpus <vcpus> | Number of vcpus (default 1) |
--rxtx-factor <factor> | Rx/tx factor (default 1.0) |
--public | Flavor is available to other projects (default) |
--private | Flavor is not available to other projects |
--property <key=value> | Property to add for this flavor (repeat option to set multiple properties) |
--project <project> | Allow <project> to access private flavor (name or id) (Must be used with --private option) |
--description <description> | Description for the flavor.(supported by api versions 2.55 - 2.latest |
--project-domain <project-domain> | Domain the project belongs to (name or id). this can be used in case collisions between project names exist. |
Table 35.3. Output formatter options
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated to show multiple columns |
Table 35.4. JSON formatter options
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Table 35.5. Shell formatter options
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Table 35.6. Table formatter options
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
35.2. flavor delete
Delete flavor(s)
Usage:
openstack flavor delete [-h] <flavor> [<flavor> ...]
Table 35.7. Positional arguments
Value | Summary |
---|---|
<flavor> | Flavor(s) to delete (name or id) |
Table 35.8. Command arguments
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
35.3. flavor list
List flavors
Usage:
openstack flavor list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] [--sort-ascending | --sort-descending] [--public | --private | --all] [--min-disk <min-disk>] [--min-ram <min-ram>] [--long] [--marker <flavor-id>] [--limit <num-flavors>]
Table 35.9. Command arguments
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--public | List only public flavors (default) |
--private | List only private flavors |
--all | List all flavors, whether public or private |
--min-disk <min-disk> | Filters the flavors by a minimum disk space, in gib. |
--min-ram <min-ram> | Filters the flavors by a minimum ram, in mib. |
--long | List additional fields in output |
--marker <flavor-id> | The last flavor id of the previous page |
--limit <num-flavors> | Maximum number of flavors to display. this is also configurable on the server. The actual limit used will be the lower of the user-supplied value and the server configuration-derived value |
Table 35.10. Output formatter options
Value | Summary |
---|---|
-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated to show multiple columns |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
--sort-ascending | Sort the column(s) in ascending order |
--sort-descending | Sort the column(s) in descending order |
Table 35.11. CSV formatter options
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Table 35.12. JSON formatter options
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Table 35.13. Table formatter options
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
35.4. flavor set
Set flavor properties
Usage:
openstack flavor set [-h] [--no-property] [--property <key=value>] [--project <project>] [--project-domain <project-domain>] [--description <description>] <flavor>
Table 35.14. Positional arguments
Value | Summary |
---|---|
<flavor> | Flavor to modify (name or id) |
Table 35.15. Command arguments
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--no-property | Remove all properties from this flavor (specify both --no-property and --property to remove the current properties before setting new properties.) |
--property <key=value> | Property to add or modify for this flavor (repeat option to set multiple properties) |
--project <project> | Set flavor access to project (name or id) (admin only) |
--project-domain <project-domain> | Domain the project belongs to (name or id). this can be used in case collisions between project names exist. |
--description <description> | Set description for the flavor.(supported by api versions 2.55 - 2.latest |
35.5. flavor show
Display flavor details
Usage:
openstack flavor show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] <flavor>
Table 35.16. Positional arguments
Value | Summary |
---|---|
<flavor> | Flavor to display (name or id) |
Table 35.17. Command arguments
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Table 35.18. Output formatter options
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated to show multiple columns |
Table 35.19. JSON formatter options
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Table 35.20. Shell formatter options
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Table 35.21. Table formatter options
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
35.6. flavor unset
Unset flavor properties
Usage:
openstack flavor unset [-h] [--property <key>] [--project <project>] [--project-domain <project-domain>] <flavor>
Table 35.22. Positional arguments
Value | Summary |
---|---|
<flavor> | Flavor to modify (name or id) |
Table 35.23. Command arguments
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--property <key> | Property to remove from flavor (repeat option to unset multiple properties) |
--project <project> | Remove flavor access from project (name or id) (admin only) |
--project-domain <project-domain> | Domain the project belongs to (name or id). this can be used in case collisions between project names exist. |