6.2.5.3. network-environment.yaml 파일

이 파일은 네트워크를 구성하는 데 사용되는 기본 파일입니다. /home/stack/baremetal-vlan/ 디렉터리에 있습니다. 다음 파일은 다른 네트워크의 VLAN ID 및 IP 서브넷을 지정하고 공급자 매핑을 보여줍니다. nic-configs 디렉터리의 controller.yaml 및 compute.yaml 파일은 컨트롤러 및 컴퓨팅 노드의 네트워크 구성을 지정하는 데 사용됩니다.

컨트롤러 노드 (3) 및 컴퓨팅 노드(2)의 수가 예에 지정되어 있습니다.

resource_registry:
  # Specify the relative/absolute path to the config files you want to use for override the default.
  OS::TripleO::Compute::Net::SoftwareConfig: nic-configs/compute.yaml
  OS::TripleO::Controller::Net::SoftwareConfig: nic-configs/controller.yaml

  # Network isolation configuration
  # Service section
  # If some service should be disabled, use the following example
  # OS::TripleO::Network::Management: OS::Heat::None
  OS::TripleO::Network::External: /usr/share/openstack-tripleo-heat-templates/network/external.yaml
  OS::TripleO::Network::InternalApi: /usr/share/openstack-tripleo-heat-templates/network/internal_api.yaml
  OS::TripleO::Network::Tenant: /usr/share/openstack-tripleo-heat-templates/network/tenant.yaml
  OS::TripleO::Network::Management: OS::Heat::None
  OS::TripleO::Network::StorageMgmt: OS::Heat::None
  OS::TripleO::Network::Storage: OS::Heat::None

  # Port assignments for the VIPs
  OS::TripleO::Network::Ports::ExternalVipPort: /usr/share/openstack-tripleo-heat-templates/network/ports/external.yaml
  OS::TripleO::Network::Ports::InternalApiVipPort: /usr/share/openstack-tripleo-heat-templates/network/ports/internal_api.yaml
  OS::TripleO::Network::Ports::RedisVipPort: /usr/share/openstack-tripleo-heat-templates/network/ports/vip.yaml
  OS::TripleO::Network::Ports::StorageVipPort: /usr/share/openstack-tripleo-heat-templates/network/ports/noop.yaml
  OS::TripleO::Network::Ports::StorageMgmtVipPort: /usr/share/openstack-tripleo-heat-templates/network/ports/noop.yaml

  # Port assignments for the controller role
  OS::TripleO::Controller::Ports::ExternalPort: /usr/share/openstack-tripleo-heat-templates/network/ports/external.yaml
  OS::TripleO::Controller::Ports::InternalApiPort: /usr/share/openstack-tripleo-heat-templates/network/ports/internal_api.yaml
  OS::TripleO::Controller::Ports::TenantPort: /usr/share/openstack-tripleo-heat-templates/network/ports/tenant.yaml
  OS::TripleO::Controller::Ports::ManagementPort: /usr/share/openstack-tripleo-heat-templates/network/ports/noop.yaml
  OS::TripleO::Controller::Ports::StoragePort: /usr/share/openstack-tripleo-heat-templates/network/ports/noop.yaml
  OS::TripleO::Controller::Ports::StorageMgmtPort: /usr/share/openstack-tripleo-heat-templates/network/ports/noop.yaml

  # Port assignments for the compute role
  OS::TripleO::Compute::Ports::ExternalPort: /usr/share/openstack-tripleo-heat-templates/network/ports/external.yaml
  OS::TripleO::Compute::Ports::InternalApiPort: /usr/share/openstack-tripleo-heat-templates/network/ports/internal_api.yaml
  OS::TripleO::Compute::Ports::TenantPort: /usr/share/openstack-tripleo-heat-templates/network/ports/tenant.yaml
  OS::TripleO::Compute::Ports::ManagementPort: /usr/share/openstack-tripleo-heat-templates/network/ports/noop.yaml
  OS::TripleO::Compute::Ports::StoragePort: /usr/share/openstack-tripleo-heat-templates/network/ports/noop.yaml
  OS::TripleO::Compute::Ports::StorageMgmtPort: /usr/share/openstack-tripleo-heat-templates/network/ports/noop.yaml

  # Port assignments for service virtual IPs for the controller role
  OS::TripleO::Controller::Ports::RedisVipPort: /usr/share/openstack-tripleo-heat-templates/network/ports/vip.yaml
  OS::TripleO::NodeUserData: /home/stack/baremetal-vlan/firstboot-config.yaml

parameter_defaults:
  # Customize all these values to match the local environment
  InternalApiNetCidr: 172.17.0.0/24
  TenantNetCidr: 172.16.0.0/24
  ExternalNetCidr: 192.168.210.0/24
  # CIDR subnet mask length for provisioning network
  ControlPlaneSubnetCidr: '24'
  InternalApiAllocationPools: [{'start': '172.17.0.10', 'end': '172.17.0.200'}]
  TenantAllocationPools: [{'start': '172.16.0.100', 'end': '172.16.0.200'}]
  # Use an External allocation pool which will leave room for floating IPs
  ExternalAllocationPools: [{'start': '192.168.210.2', 'end': '192.168.210.12'}]
  # Set to the router gateway on the external network
  ExternalInterfaceDefaultRoute: 192.168.210.1
  # Gateway router for the provisioning network (or Undercloud IP)
  ControlPlaneDefaultRoute: 192.0.5.1
  # Generally the IP of the Undercloud
  EC2MetadataIp: 192.0.5.1
  InternalApiNetworkVlanID: 600
  TenantNetworkVlanID: 554
  ExternalNetworkVlanID: 552
  # Define the DNS servers (maximum 2) for the overcloud nodes
  DnsServers: ["10.35.28.28","8.8.8.8"]
  # May set to br-ex if using floating IPs only on native VLAN on bridge br-ex
  NeutronExternalNetworkBridge: "''"
  # The tunnel type for the tenant network (vxlan or gre). Set to '' to disable tunneling.
  NeutronTunnelTypes: ''
  # The tenant network type for Neutron (vlan or vxlan).
  NeutronNetworkType: 'vlan'
  # The OVS logical->physical bridge mappings to use.
  #  NeutronBridgeMappings: 'datacentre:br-ex,tenant:br-isolated'
  # The Neutron ML2 and OpenVSwitch vlan mapping range to support.
  NeutronNetworkVLANRanges: 'datacentre:552:553,tenant:555:601'
  # Nova flavor to use.
  OvercloudControlFlavor: baremetal
  OvercloudComputeFlavor: baremetal
  # Number of nodes to deploy.
  ControllerCount: 3
  ComputeCount: 2

  # Sets overcloud nodes custom names
  # http://docs.openstack.org/developer/tripleo-docs/advanced_deployment/node_placement.html#custom-hostnames
  ControllerHostnameFormat: 'controller-%index%'
  ComputeHostnameFormat: 'compute-%index%'
  CephStorageHostnameFormat: 'ceph-%index%'
  ObjectStorageHostnameFormat: 'swift-%index%'