<access-rule>

Access rule(s) to delete (name or id)

-h, --help

Show this help message and exit

-h, --help

Show this help message and exit

--user <user>

User whose access rules to list (name or id)

--user-domain <user-domain>

Domain the user belongs to (name or id). this can be used in case collisions between user names exist.

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<access-rule>

Access rule to display (name or id)

-h, --help

Show this help message and exit

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

-h, --help

Show this help message and exit

--consumer-key <consumer-key>

Consumer key (required)

--consumer-secret <consumer-secret>

Consumer secret (required)

--request-key <request-key>

Request token to exchange for access token (required)

--request-secret <request-secret>

Secret associated with <request-key> (required)

--verifier <verifier>

Verifier associated with <request-key> (required)

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

URI

The uri reference for the secret or container.

-h, --help

Show this help message and exit

URI

The uri reference for the secret or container.

-h, --help

Show this help message and exit

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

URI

The uri reference for the secret or container.

-h, --help

Show this help message and exit

--user [USERS], -u [USERS]

Keystone userid(s) for acl.

--project-access

Flag to enable project access behavior.

--no-project-access

Flag to disable project access behavior.

--operation-type {read}, -o {read}

Type of barbican operation acl is set for

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

URI

The uri reference for the secret or container.

-h, --help

Show this help message and exit

--user [USERS], -u [USERS]

Keystone userid(s) for acl.

--project-access

Flag to enable project access behavior.

--no-project-access

Flag to disable project access behavior.

--operation-type {read}, -o {read}

Type of barbican operation acl is set for

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

URI

The uri reference for the secret or container.

-h, --help

Show this help message and exit

--user [USERS], -u [USERS]

Keystone userid(s) for acl.

--project-access

Flag to enable project access behavior.

--no-project-access

Flag to disable project access behavior.

--operation-type {read}, -o {read}

Type of barbican operation acl is set for

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

definition

Action definition file

-h, --help

Show this help message and exit

--marker [MARKER]

The last execution uuid of the previous page, displays list of executions after "marker".

--limit [LIMIT]

Maximum number of entries to return in a single result.

--sort_keys [SORT_KEYS]

Comma-separated list of sort keys to sort results by. Default: created_at. Example: mistral execution-list --sort_keys=id,description

--sort_dirs [SORT_DIRS]

Comma-separated list of sort directions. default: asc. Example: mistral execution-list --sort_keys=id,description --sort_dirs=asc,desc

--filter FILTERS

Filters. can be repeated.

--public

With this flag action will be marked as "public".

--namespace [NAMESPACE]

Namespace to create the action within.

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

name

Action name

-h, --help

Show this help message and exit

--namespace [NAMESPACE]

Namespace of the action.

action

Name or id of action(s).

-h, --help

Show this help message and exit

--namespace [NAMESPACE]

Namespace of the action(s).

-h, --help

Show this help message and exit

--marker [MARKER]

The last execution uuid of the previous page, displays list of executions after "marker".

--limit [LIMIT]

Maximum number of entries to return in a single result.

--sort_keys [SORT_KEYS]

Comma-separated list of sort keys to sort results by. Default: created_at. Example: mistral execution-list --sort_keys=id,description

--sort_dirs [SORT_DIRS]

Comma-separated list of sort directions. default: asc. Example: mistral execution-list --sort_keys=id,description --sort_dirs=asc,desc

--filter FILTERS

Filters. can be repeated.

--namespace [NAMESPACE]

Namespace of the actions.

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

action

Action (name or id)

-h, --help

Show this help message and exit

--namespace [NAMESPACE]

Namespace to create the action within.

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

definition

Action definition file

-h, --help

Show this help message and exit

--marker [MARKER]

The last execution uuid of the previous page, displays list of executions after "marker".

--limit [LIMIT]

Maximum number of entries to return in a single result.

--sort_keys [SORT_KEYS]

Comma-separated list of sort keys to sort results by. Default: created_at. Example: mistral execution-list --sort_keys=id,description

--sort_dirs [SORT_DIRS]

Comma-separated list of sort directions. default: asc. Example: mistral execution-list --sort_keys=id,description --sort_dirs=asc,desc

--filter FILTERS

Filters. can be repeated.

--id ID

Action id.

--public

With this flag action will be marked as "public".

--namespace [NAMESPACE]

Namespace of the action.

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

action_execution

Id of action execution identifier(s).

-h, --help

Show this help message and exit

id

Action execution id.

-h, --help

Show this help message and exit

task_execution_id

Task execution id.

-h, --help

Show this help message and exit

--marker [MARKER]

The last execution uuid of the previous page, displays list of executions after "marker".

--limit [LIMIT]

Maximum number of entries to return in a single result.

--sort_keys [SORT_KEYS]

Comma-separated list of sort keys to sort results by. Default: created_at. Example: mistral execution-list --sort_keys=id,description

--sort_dirs [SORT_DIRS]

Comma-separated list of sort directions. default: asc. Example: mistral execution-list --sort_keys=id,description --sort_dirs=asc,desc

--filter FILTERS

Filters. can be repeated.

--oldest

Display the executions starting from the oldest entries instead of the newest

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

id

Action execution id.

-h, --help

Show this help message and exit

name

Action name to execute.

input

Action input.

-h, --help

Show this help message and exit

-s, --save-result

Save the result into db.

--run-sync

Run the action synchronously.

-t TARGET, --target TARGET

Action will be executed on <target> executor.

--namespace [NAMESPACE]

Namespace of the action(s).

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

action_execution

Action execution id.

-h, --help

Show this help message and exit

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

id

Action execution id.

-h, --help

Show this help message and exit

--state {PAUSED,RUNNING,SUCCESS,ERROR,CANCELLED}

Action execution state

--output OUTPUT

Action execution output

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<name>

New address group name

-h, --help

Show this help message and exit

--description <description>

New address group description

--address <ip-address>

Ip address or cidr (repeat option to set multiple addresses)

--project <project>

Owner’s project (name or id)

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<address-group>

Address group(s) to delete (name or id)

-h, --help

Show this help message and exit

-h, --help

Show this help message and exit

--name <name>

List only address groups of given name in output

--project <project>

List address groups according to their project (name or ID)

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<address-group>

Address group to modify (name or id)

-h, --help

Show this help message and exit

--name <name>

Set address group name

--description <description>

Set address group description

--address <ip-address>

Ip address or cidr (repeat option to set multiple addresses)

<address-group>

Address group to display (name or id)

-h, --help

Show this help message and exit

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<address-group>

Address group to modify (name or id)

-h, --help

Show this help message and exit

--address <ip-address>

Ip address or cidr (repeat option to unset multiple addresses)

<name>

New address scope name

-h, --help

Show this help message and exit

--ip-version {4,6}

Ip version (default is 4)

--project <project>

Owner’s project (name or id)

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

--share

Share the address scope between projects

--no-share

Do not share the address scope between projects (default)

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<address-scope>

Address scope(s) to delete (name or id)

-h, --help

Show this help message and exit

-h, --help

Show this help message and exit

--name <name>

List only address scopes of given name in output

--ip-version <ip-version>

List address scopes of given ip version networks (4 or 6)

--project <project>

List address scopes according to their project (name or ID)

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

--share

List address scopes shared between projects

--no-share

List address scopes not shared between projects

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<address-scope>

Address scope to modify (name or id)

-h, --help

Show this help message and exit

--name <name>

Set address scope name

--share

Share the address scope between projects

--no-share

Do not share the address scope between projects

<address-scope>

Address scope to display (name or id)

-h, --help

Show this help message and exit

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<aggregate>

Aggregate (name or id)

<host>

Host to add to <aggregate>

-h, --help

Show this help message and exit

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<aggregate>

Aggregate (name or id)

<image>

Image id to request caching for aggregate (name or id). may be specified multiple times.

-h, --help

Show this help message and exit

<name>

New aggregate name

-h, --help

Show this help message and exit

--zone <availability-zone>

Availability zone name

--property <key=value>

Property to add to this aggregate (repeat option to set multiple properties)

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<aggregate>

Aggregate(s) to delete (name or id)

-h, --help

Show this help message and exit

-h, --help

Show this help message and exit

--long

List additional fields in output

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<aggregate>

Aggregate (name or id)

<host>

Host to remove from <aggregate>

-h, --help

Show this help message and exit

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<aggregate>

Aggregate to modify (name or id)

-h, --help

Show this help message and exit

--name <name>

Set aggregate name

--zone <availability-zone>

Set availability zone name

--property <key=value>

Property to set on <aggregate> (repeat option to set multiple properties)

--no-property

Remove all properties from <aggregate> (specify both --property and --no-property to overwrite the current properties)

<aggregate>

Aggregate to display (name or id)

-h, --help

Show this help message and exit

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<aggregate>

Aggregate to modify (name or id)

-h, --help

Show this help message and exit

--property <key>

Property to remove from aggregate (repeat option to remove multiple properties)

-h, --help

Show this help message and exit

--name <NAME>

Name of the alarm

-t <TYPE>, --type <TYPE>

Type of alarm, should be one of: event, composite, threshold, gnocchi_resources_threshold, gnocchi_aggregation_by_metrics_threshold, gnocchi_aggregation_by_resources_threshold, loadbalancer_member_health.

--project-id <PROJECT_ID>

Project to associate with alarm (configurable by admin users only)

--user-id <USER_ID>

User to associate with alarm (configurable by admin users only)

--description <DESCRIPTION>

Free text description of the alarm

--state <STATE>

State of the alarm, one of: [ok, alarm, insufficient data]

--severity <SEVERITY>

Severity of the alarm, one of: [low, moderate, critical]

--enabled {True|False}

True if alarm evaluation is enabled

--alarm-action <Webhook URL>

Url to invoke when state transitions to alarm. may be used multiple times

--ok-action <Webhook URL>

Url to invoke when state transitions to ok. may be used multiple times

--insufficient-data-action <Webhook URL>

Url to invoke when state transitions to insufficient data. May be used multiple times

--time-constraint <Time Constraint>

Only evaluate the alarm if the time at evaluation is within this time constraint. Start point(s) of the constraint are specified with a cron expression, whereas its duration is given in seconds. Can be specified multiple times for multiple time constraints, format is: name=<CONSTRAINT_NAME>;start=< CRON>;duration=<SECONDS>;[description=<DESCRIPTION>;[t imezone=<IANA Timezone>]]

--repeat-actions {True|False}

True if actions should be repeatedly notified while alarm remains in target state

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

--query <QUERY>

For alarms of type threshold or event: key[op]data_type::value; list. data_type is optional, but if supplied must be string, integer, float, or boolean. For alarms of type gnocchi_aggregation_by_resources_threshold: need to specify a complex query json string, like: {"and": [{"=": {"ended_at": null}}, …​]}.

--comparison-operator <OPERATOR>

Operator to compare with, one of: [lt, le, eq, ne, ge, gt]

--evaluation-periods <EVAL_PERIODS>

Number of periods to evaluate over

--threshold <THRESHOLD>

Threshold to evaluate against.

--event-type <EVENT_TYPE>

Event type to evaluate against

-m <METER NAME>, --meter-name <METER NAME>

Meter to evaluate against

--period <PERIOD>

Length of each period (seconds) to evaluate over.

--statistic <STATISTIC>

Statistic to evaluate, one of: [max, min, avg, sum, count]

--granularity <GRANULARITY>

The time range in seconds over which to query.

--aggregation-method <AGGR_METHOD>

The aggregation_method to compare to the threshold.

--metric <METRIC>, --metrics <METRIC>

The metric id or name depending of the alarm type

--resource-type <RESOURCE_TYPE>

The type of resource.

--resource-id <RESOURCE_ID>

The id of a resource.

--composite-rule <COMPOSITE_RULE>

Composite threshold rule with json format, the form can be a nested dict which combine threshold/gnocchi rules by "and", "or". For example, the form is like: {"or":[RULE1, RULE2, {"and": [RULE3, RULE4]}]}, The RULEx can be basic threshold rules but must include a "type" field, like this: {"threshold": 0.8,"meter_name":"cpu_util","type":"threshold"}

--stack-id <STACK_NAME_OR_ID>

Name or id of the root / top level heat stack containing the loadbalancer pool and members. An update will be triggered on the root Stack if an unhealthy member is detected in the loadbalancer pool.

--pool-id <LOADBALANCER_POOL_NAME_OR_ID>

Name or id of the loadbalancer pool for which the health of each member will be evaluated.

--autoscaling-group-id <AUTOSCALING_GROUP_NAME_OR_ID>

Id of the heat autoscaling group that contains the loadbalancer members. Unhealthy members will be marked as such before an update is triggered on the root stack.

<ALARM ID or NAME>

Id or name of an alarm.

-h, --help

Show this help message and exit

--name <NAME>

Name of the alarm

-h, --help

Show this help message and exit

--query QUERY

Rich query supported by aodh, e.g. project_id!=my-id user_id=foo or user_id=bar

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<alarm-id>

Id of an alarm

-h, --help

Show this help message and exit

--limit <LIMIT>

Number of resources to return (default is server default)

--marker <MARKER>

Last item of the previous listing. return the next results after this value,the supported marker is event_id.

--sort <SORT_KEY:SORT_DIR>

Sort of resource attribute. e.g. timestamp:desc

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

-h, --help

Show this help message and exit

--query QUERY

Rich query supported by aodh, e.g. project_id!=my-id user_id=foo or user_id=bar

--filter <KEY1=VALUE1;KEY2=VALUE2…​>

Filter parameters to apply on returned alarms.

--limit <LIMIT>

Number of resources to return (default is server default)

--marker <MARKER>

Last item of the previous listing. return the next results after this value,the supported marker is alarm_id.

--sort <SORT_KEY:SORT_DIR>

Sort of resource attribute, e.g. name:asc

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

project

Project id.

-h, --help

Show this help message and exit

--alarm ALARM

New value for the alarm quota. value -1 means unlimited.

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

-h, --help

Show this help message and exit

--project PROJECT

Project id. if not specified, get quota for the current project.

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<ALARM ID or NAME>

Id or name of an alarm.

-h, --help

Show this help message and exit

--name <NAME>

Name of the alarm

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<ALARM ID or NAME>

Id or name of an alarm.

-h, --help

Show this help message and exit

--name <NAME>

Name of the alarm

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<ALARM ID or NAME>

Id or name of an alarm.

-h, --help

Show this help message and exit

--name <NAME>

Name of the alarm

--state <STATE>

State of the alarm, one of: [ok, alarm, insufficient data]

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<ALARM ID or NAME>

Id or name of an alarm.

-h, --help

Show this help message and exit

--name <NAME>

Name of the alarm

-t <TYPE>, --type <TYPE>

Type of alarm, should be one of: event, composite, threshold, gnocchi_resources_threshold, gnocchi_aggregation_by_metrics_threshold, gnocchi_aggregation_by_resources_threshold, loadbalancer_member_health.

--project-id <PROJECT_ID>

Project to associate with alarm (configurable by admin users only)

--user-id <USER_ID>

User to associate with alarm (configurable by admin users only)

--description <DESCRIPTION>

Free text description of the alarm

--state <STATE>

State of the alarm, one of: [ok, alarm, insufficient data]

--severity <SEVERITY>

Severity of the alarm, one of: [low, moderate, critical]

--enabled {True|False}

True if alarm evaluation is enabled

--alarm-action <Webhook URL>

Url to invoke when state transitions to alarm. may be used multiple times

--ok-action <Webhook URL>

Url to invoke when state transitions to ok. may be used multiple times

--insufficient-data-action <Webhook URL>

Url to invoke when state transitions to insufficient data. May be used multiple times

--time-constraint <Time Constraint>

Only evaluate the alarm if the time at evaluation is within this time constraint. Start point(s) of the constraint are specified with a cron expression, whereas its duration is given in seconds. Can be specified multiple times for multiple time constraints, format is: name=<CONSTRAINT_NAME>;start=< CRON>;duration=<SECONDS>;[description=<DESCRIPTION>;[t imezone=<IANA Timezone>]]

--repeat-actions {True|False}

True if actions should be repeatedly notified while alarm remains in target state

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

--query <QUERY>

For alarms of type threshold or event: key[op]data_type::value; list. data_type is optional, but if supplied must be string, integer, float, or boolean. For alarms of type gnocchi_aggregation_by_resources_threshold: need to specify a complex query json string, like: {"and": [{"=": {"ended_at": null}}, …​]}.

--comparison-operator <OPERATOR>

Operator to compare with, one of: [lt, le, eq, ne, ge, gt]

--evaluation-periods <EVAL_PERIODS>

Number of periods to evaluate over

--threshold <THRESHOLD>

Threshold to evaluate against.

--event-type <EVENT_TYPE>

Event type to evaluate against

-m <METER NAME>, --meter-name <METER NAME>

Meter to evaluate against

--period <PERIOD>

Length of each period (seconds) to evaluate over.

--statistic <STATISTIC>

Statistic to evaluate, one of: [max, min, avg, sum, count]

--granularity <GRANULARITY>

The time range in seconds over which to query.

--aggregation-method <AGGR_METHOD>

The aggregation_method to compare to the threshold.

--metric <METRIC>, --metrics <METRIC>

The metric id or name depending of the alarm type

--resource-type <RESOURCE_TYPE>

The type of resource.

--resource-id <RESOURCE_ID>

The id of a resource.

--composite-rule <COMPOSITE_RULE>

Composite threshold rule with json format, the form can be a nested dict which combine threshold/gnocchi rules by "and", "or". For example, the form is like: {"or":[RULE1, RULE2, {"and": [RULE3, RULE4]}]}, The RULEx can be basic threshold rules but must include a "type" field, like this: {"threshold": 0.8,"meter_name":"cpu_util","type":"threshold"}

--stack-id <STACK_NAME_OR_ID>

Name or id of the root / top level heat stack containing the loadbalancer pool and members. An update will be triggered on the root Stack if an unhealthy member is detected in the loadbalancer pool.

--pool-id <LOADBALANCER_POOL_NAME_OR_ID>

Name or id of the loadbalancer pool for which the health of each member will be evaluated.

--autoscaling-group-id <AUTOSCALING_GROUP_NAME_OR_ID>

Id of the heat autoscaling group that contains the loadbalancer members. Unhealthy members will be marked as such before an update is triggered on the root stack.

-h, --help

Show this help message and exit

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<name>

Name of the application credential

-h, --help

Show this help message and exit

--secret <secret>

Secret to use for authentication (if not provided, one will be generated)

--role <role>

Roles to authorize (name or id) (repeat option to set multiple values)

--expiration <expiration>

Sets an expiration date for the application credential, format of YYYY-mm-ddTHH:MM:SS (if not provided, the application credential will not expire)

--description <description>

Application credential description

--unrestricted

Enable application credential to create and delete other application credentials and trusts (this is potentially dangerous behavior and is disabled by default)

--restricted

Prohibit application credential from creating and deleting other application credentials and trusts (this is the default behavior)

--access-rules <access-rules>

Either a string or file path containing a json- formatted list of access rules, each containing a request method, path, and service, for example [{"method": "GET", "path": "/v2.1/servers", "service": "compute"}]

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<application-credential>

Application credentials(s) to delete (name or id)

-h, --help

Show this help message and exit

-h, --help

Show this help message and exit

--user <user>

User whose application credentials to list (name or ID)

--user-domain <user-domain>

Domain the user belongs to (name or id). this can be used in case collisions between user names exist.

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

<application-credential>

Application credential to display (name or id)