Chapter 4. Setting Up Clair Security Scanning

clair:
  database:
    type: pgsql
    options:
      # A PostgreSQL Connection string pointing to the Clair Postgres database.
      # Documentation on the format can be found at: http://www.postgresql.org/docs/9.4/static/libpq-connect.html
      source: { POSTGRES_CONNECTION_STRING }
      cachesize: 16384
  api:
    # The port at which Clair will report its health status. For example, if Clair is running at
    # https://clair.mycompany.com, the health will be reported at
    # http://clair.mycompany.com:6061/health.
    healthport: 6061

    port: 6062
    timeout: 900s

    # paginationkey can be any random set of characters. *Must be the same across all Clair instances*.
    paginationkey: "XxoPtCUzrUv4JV5dS+yQ+MdW7yLEJnRMwigVY/bpgtQ="

  updater:
    # interval defines how often Clair will check for updates from its upstream vulnerability databases.
    interval: 6h
    notifier:
      attempts: 3
      renotifyinterval: 1h
      http:
        # QUAY_ENDPOINT defines the endpoint at which Quay is running.
        # For example: https://myregistry.mycompany.com
        endpoint: { QUAY_ENDPOINT }/secscan/notify
        proxy: http://localhost:6063

jwtproxy:
  signer_proxy:
    enabled: true
    listen_addr: :6063
    ca_key_file: /certificates/mitm.key # Generated internally, do not change.
    ca_crt_file: /certificates/mitm.crt # Generated internally, do not change.
    signer:
      issuer: security_scanner
      expiration_time: 5m
      max_skew: 1m
      nonce_length: 32
      private_key:
        type: preshared
        options:
          # The ID of the service key generated for Clair. The ID is returned when setting up
          # the key in [Quay Setup](security-scanning.md)
          key_id: { CLAIR_SERVICE_KEY_ID }
          private_key_path: /config/security_scanner.pem

  verifier_proxies:
  - enabled: true
    # The port at which Clair will listen.
    listen_addr: :6060

    # If Clair is to be served via TLS, uncomment these lines. See the "Running Clair under TLS"
    # section below for more information.
    # key_file: /config/clair.key
    # crt_file: /config/clair.crt

    verifier:
      # CLAIR_ENDPOINT is the endpoint at which this Clair will be accessible. Note that the port
      # specified here must match the listen_addr port a few lines above this.
      # Example: https://myclair.mycompany.com:6060
      audience: { CLAIR_ENDPOINT }

      upstream: http://localhost:6062
      key_server:
        type: keyregistry
        options:
          # QUAY_ENDPOINT defines the endpoint at which Quay is running.
          # Example: https://myregistry.mycompany.com
          registry: { QUAY_ENDPOINT }/keys/

clair:
  database:
    type: pgsql
    options:
      # A PostgreSQL Connection string pointing to the Clair Postgres database.
      # Documentation on the format can be found at: http://www.postgresql.org/docs/9.4/static/libpq-connect.html
      source: { POSTGRES_CONNECTION_STRING }
      cachesize: 16384
  api:
    # The port at which Clair will report its health status. For example, if Clair is running at
    # https://clair.mycompany.com, the health will be reported at
    # http://clair.mycompany.com:6061/health.
    healthport: 6061

    port: 6062
    timeout: 900s

    # paginationkey can be any random set of characters. *Must be the same across all Clair instances*.
    paginationkey:

  updater:
    # interval defines how often Clair will check for updates from its upstream vulnerability databases.
    interval: 6h
    notifier:
      attempts: 3
      renotifyinterval: 1h
      http:
        # QUAY_ENDPOINT defines the endpoint at which Quay is running.
        # For example: https://myregistry.mycompany.com
        endpoint: { QUAY_ENDPOINT }/secscan/notify
        proxy: http://localhost:6063

jwtproxy:
  signer_proxy:
    enabled: true
    listen_addr: :6063
    ca_key_file: /certificates/mitm.key # Generated internally, do not change.
    ca_crt_file: /certificates/mitm.crt # Generated internally, do not change.
    signer:
      issuer: security_scanner
      expiration_time: 5m
      max_skew: 1m
      nonce_length: 32
      private_key:
        type: autogenerated
        options:
          rotate_every: 12h
          key_folder: /config/
          key_server:
            type: keyregistry
            options:
              # QUAY_ENDPOINT defines the endpoint at which Quay is running.
              # For example: https://myregistry.mycompany.com
              registry: { QUAY_ENDPOINT }/keys/


  verifier_proxies:
  - enabled: true
    # The port at which Clair will listen.
    listen_addr: :6060

    # If Clair is to be served via TLS, uncomment these lines. See the "Running Clair under TLS"
    # section below for more information.
    # key_file: /config/clair.key
    # crt_file: /config/clair.crt

    verifier:
      # CLAIR_ENDPOINT is the endpoint at which this Clair will be accessible. Note that the port
      # specified here must match the listen_addr port a few lines above this.
      # Example: https://myclair.mycompany.com:6060
      audience: { CLAIR_ENDPOINT }

      upstream: http://localhost:6062
      key_server:
        type: keyregistry
        options:
          # QUAY_ENDPOINT defines the endpoint at which Quay is running.
          # Example: https://myregistry.mycompany.com
          registry: { QUAY_ENDPOINT }/keys/

For certificates that come from a public certificate authority, follow these steps:

If your certificates use a public CA, you are now ready to run Clair. If you are using your own certificate authority, configure Clair to trust it below.

Similar to the process for setting up Docker to trust your self-signed certificates, Clair must also be configured to trust your certificates. Using the same CA certificate bundle used to configure Docker, complete the following steps:

Now Clair will be able to trust the source of your TLS certificates and use them to secure communication between Clair and Quay.