Managing Transactions on JBoss EAP

Red Hat JBoss Enterprise Application Platform 7.3

For Use with Red Hat JBoss Enterprise Application Platform 7.3

Red Hat Customer Content Services


This document provides information for administrators to troubleshoot transactions on JBoss EAP.

Chapter 1. Transactions in JBoss EAP

A transaction consists of two or more operations that must either all succeed or all fail. A successful outcome results in a commit, and a failed outcome results in a rollback. In a rollback, each member’s state is reverted before the transaction attempts the commit.

1.1. Transaction Subsystem

The transactions subsystem allows you to configure the Transaction Manager (TM) options, such as timeout values, transaction logging, statistics collection, and whether to use Jakarta Transactions. The transactions subsystem consists of four main elements:

Core environment
The core environment includes the TM interface that allows the JBoss EAP server to control transaction boundaries on behalf of the resource being managed. A transaction coordinator manages communication with the transactional objects and resources that participate in transactions.
Recovery environment
The recovery environment of the JBoss EAP transaction service ensures that the system applies the results of a transaction consistently to all the resources affected by the transaction. This operation continues even if any application process or the machine hosting them crashes or loses network connectivity.
Coordinator environment
The coordinator environment defines custom properties for the transaction, such as default timeout and logging statistics.
Object store
JBoss EAP transaction service uses an object store to record the outcomes of transactions in a persistent manner for failure recovery. The Recovery Manager scans the object store and other locations of information, for transactions and resources that might need recovery.

1.2. Properties of the Transaction

The typical standard for a well-designed transaction is that it is atomic, consistent, isolated, and durable (ACID):

All members of the transaction must make the same decision regarding committing or rolling back the transaction.
Transactions produce consistent results and preserve application specific invariants.
The data being operated on must be locked before modification to prevent processes outside the scope of the transaction from modifying the data.
The effects of a committed transaction are not lost, except in the event of a catastrophic failure.

1.3. Components of a Transaction

Transaction Coordinator
The coordinator governs the outcome of a transaction. It is responsible for ensuring that the web services invoked by the client arrive at a consistent outcome.
Transaction Context
Transaction context is the information about a transaction that is propagated, which allows the transaction to span multiple services.
Transaction Participant
Participants are the services enrolled in a transaction using a participant model.
Transaction Service
Transaction service captures the model of the underlying transaction protocol and coordinates with the participants affiliated with a transaction according to that model.
Transaction API
Transaction API provides an interface for transaction demarcation and the registration of participants.

1.4. Principles of Transaction Management

1.4.1. XA Versus Non-XA Transactions

Non-XA transactions involve only one resource. They do not have a transaction coordinator and a single resource does all the transaction work. They are sometimes called local transactions.

XA transactions involve multiple resources. They also have a coordinating transaction manager with one or more databases, or other resources like Jakarta Messaging, all participating in a single transaction. They are referred to as global transactions.

Chapter 2. Configuring Transactions

2.1. Unique Node Identifier

Unique node identifier allows JBoss EAP to recover transactions and transaction states that match only the specified node identifier. You can set the node identifier using the com.arjuna.ats.arjuna.nodeIdentifier property.

2.1.1. Importance of the Unique Node Identifier

When running XA recovery, you must configure the Xid types that JBoss EAP transactions can recover. Each Xid has the unique node identifier encoded in it and JBoss EAP only recovers the transactions and transaction states that match the specified node identifier.

You can configure the node identifier using the JTAEnvironmentBean.xaRecoveryNodes property, which can include multiple values in a list.


A value of asterisk "*" forces JBoss EAP to recover, and possibly rollback, all the transactions irrespective of their node identifiers. It must be used with caution.

The value of com.arjuna.ats.jta.xaRecoveryNode property must be alphanumeric and must match the value of the com.arjuna.ats.arjuna.nodeIdentifier property.

2.2. Configuring the Transaction Manager

You can configure the transaction manager using the web-based management console or the command line management CLI.

Configuring the Transaction Manager Using the Management Console

The following steps explain how to configure the transaction manager using the web-based management console:

  1. Select the Configuration tab from the top of the screen.
  2. If you are running JBoss EAP as a managed domain, choose the desired profile to modify.
  3. From the Subsystem list, select Transaction and click View.
  4. Select the appropriate tab for the settings that you want to configure, such as Recovery for recovery options.
  5. Click Edit, make the necessary changes, and click Save to save the changes.

Configuring the Transaction Manager Using the Management CLI

Using the management CLI, you can configure the transaction manager using a series of commands. The commands all begin with /subsystem=transactions for a standalone server or /profile=default/subsystem=transactions/ for the default profile in a managed domain.

For a detailed listing of all the transaction manager configuration options, see the Transaction Manager Configuration Options for JBoss EAP.

2.3. Configuring the Transaction Manager Using System Properties

You can use either the management console, management CLI, or the system properties to configure many of the Transaction Manager options. However, the following options are configurable only using system properties. They are not configurable using the management CLI or management console.

Property NameDescription


Interval between recovery attempts, in seconds.

  • Must be a positive Integer.
  • Default is 120 seconds (2 minutes).


Interval between the first and second recovery passes, in seconds.

  • Must be a positive Integer.
  • Default is 10 seconds.


Interval before first recovery pass, in seconds.

  • Must be 0 or a positive Integer.
  • Default is 0 seconds.


Interval between expiry scans, in hours.

  • Can be any Integer.
  • 0 disables scanning.
  • Negative values postpone the first run.
  • Default is 12 hours.

This example shows how to configure these system properties in the standalone.xml server configuration file.

    <property name="RecoveryEnvironmentBean.periodicRecoveryPeriod" value="180"/>
    <property name="RecoveryEnvironmentBean.recoveryBackoffPeriod" value="20"/>
    <property name="RecoveryEnvironmentBean.periodicRecoveryInitializationOffset" value="5"/>
    <property name="RecoveryEnvironmentBean.expiryScanInterval" value="24"/>

For more information on how to configure system properties, see System Properties in the Configuration Guide.

2.4. Configuring Your Datasource to Use Jakarta Transactions

This task shows you how to enable Jakarta Transactions on your datasource.


  • Your database must support Jakarta Transactions. For more information, see the documentation from your database vendor.

XA datasources, as described in the Configuration Guide, are Jakarta Transactions capable by default.

Configuring the Datasource to use Jakarta Transactions

  1. Use the following management CLI command to set the jta attribute to true.


    In a managed domain, precede this command with /profile=PROFILE_NAME.

  2. Reload the server for the changes to take effect.


Your datasource is now configured to use Jakarta Transactions.

2.5. Configuring the ORB for JTS

In a default installation of JBoss EAP, the Object Request Broker (ORB) support for transactions is disabled. You can configure ORB settings in the iiop-openjdk subsystem using the management CLI or the management console.


The iiop-openjdk subsystem is available when using the full or full-ha profile in a managed domain, or the standalone-full.xml or standalone-full-ha.xml configuration file for a standalone server.

For a listing of the available configuration options for the iiop-openjdk subsystem, see IIOP Subsystem Attributes in the Configuration Guide.

Configure the ORB Using the Management CLI

You can configure each aspect of the ORB using the management CLI. This is the minimum configuration for the ORB to be used with JTS.

You can configure the following management CLI commands for a managed domain using the full profile. If necessary, change the profile to suit the one you need to configure. If you are using a standalone server, omit the /profile=full portion of the commands.

Enable the Security Interceptors

Enable the security attribute by setting the value to identity.

Enable Transactions in the IIOP Subsystem

To enable the ORB for JTS, set the value of transactions attribute to full, rather than the default spec.

/profile=full/subsystem=iiop-openjdk:write-attribute(name=transactions, value=full)
Enable JTS in the Transactions Subsystem

For JTS activation, the server must be restarted as reload is not enough.

Configure the ORB Using the Management Console

  1. Select the Configuration tab from the top of the management console. In a managed domain, you must select the appropriate profile to modify.
  2. Select SubsystemsIIOP (OpenJDK) and click View.
  3. Click Edit and modify the attributes as needed.
  4. Click Save to save the changes.

Chapter 3. Managing Transactions

3.1. Browsing Transactions

The management CLI supports the ability to browse and manipulate transaction records. This functionality is provided by the interaction between the TM and the management API of JBoss EAP.

The Transaction Manager stores information about each pending transaction and the participants involved the transaction, in a persistent storage called the object store. The management API exposes the object store as a resource called the log-store. The probe operation reads the transaction logs and creates a node path for each record. You can call the probe operation manually, whenever you need to refresh the log-store. It is normal for transaction logs to appear and disappear quickly.

Refreshing the Log Store

The following command refreshes the log store for server groups which use the profile default in a managed domain. For a standalone server, remove the profile=default from the command.


Viewing All Prepared Transactions

To view all prepared transactions, first refresh the log store, then run the following command, which functions similarly to a file system ls command.

ls /profile=default/subsystem=transactions/log-store=log-store/transactions



Each transaction is shown, along with its unique identifier. Individual operations can be run against an individual transaction. For more information, see Administering a Transaction.

3.2. Administering a Transaction

Viewing the Attributes of a Transaction

To view information about a transaction, such as its Java Naming and Directory Interface name, EIS product name and version, or its status, use the read-resource operation.


Viewing the Details of a Transaction Participant

Each transaction log contains a child element called participants. Use the read-resource operation on this element to see the details of a participant of the transaction. Participants are identified by their Java Naming and Directory Interface names.


The result may look similar to this:

   "outcome" => "success",
   "result" => {
       "eis-product-name" => "ActiveMQ",
       "eis-product-version" => "2.0",
       "jndi-name" => "java:/JmsXA",
       "status" => "HEURISTIC",
       "type" => "/StateManager/AbstractRecord/XAResourceRecord"

The outcome status shown here is in a HEURISTIC state and is eligible for recovery. See Recover a Transaction Participant for more details.

In special cases it is possible to create orphan records in the object store, that is XAResourceRecords, which do not have any corresponding transaction record in the log. For example, XA resource prepared but crashed before the TM recorded and is inaccessible for the domain management API. To access such records you need to set management option expose-all-logs to true. This option is not saved in management model and is restored to false when the server is restarted.

/profile=default/subsystem=transactions/log-store=log-store:write-attribute(name=expose-all-logs, value=true)

You can use this alternate command, which shows participant IDs of transaction in an aggregated form.


Deleting a Transaction Participant

Each transaction log supports a delete operation, to delete the transaction log representing the transaction.


This deletes all participants in the transaction as well.


Typically, you would leave participant log management to the recovery system or to the transaction log that owns it, but the delete operation is available for cases when you know it is safe to do so. In the case of heuristically completed XA resources, a forget call is triggered so that XA resource vendor logs are cleaned correctly. If this forget call fails, by default the delete operation will still succeed. You can override this behavior by setting the ObjectStoreEnvironmentBean.ignoreMBeanHeuristics system property to false.

Recovering a Transaction Participant

Each transaction participant supports recovery by using the recover operation.


If the transaction participant’s status is HEURISTIC, the recover operation switches the status to PREPARE and asks the periodic recovery process to replay the commit.

If the commit is successful, the participant is removed from the transaction log. You can verify this by running the probe operation on the log-store and checking that the participant is no longer listed. If this is the last participant, the transaction is also deleted.

Refreshing the Status of a Transaction Participant

If a transaction needs recovery, you can use the refresh operation to be sure it still requires recovery, before attempting the recovery.


For JBoss EAP 7.3, transaction failure exceptions are simply serialized and passed over the wire to the client. The client gets a ClassNotFoundException exception if they do not have the exception class on their class path.

JBoss EAP 7.3 includes the org.wildfly.common.rpc.RemoteExceptionCause exception, which is known to the client as it is from the wildfly library. The server clones the original exception to this new one, puts all field of the original exception to a string form and adds them to the exception’s message. The server then passes exceptions of type RemoteExceptionCause to the client.

3.3. Viewing Transaction Statistics

If transaction manager statistics are enabled, you can view statistics on processed transactions by the transaction manager. See the Configuring the Transaction Manager section of the JBoss EAP Configuration Guide for information about how to enable transaction manager statistics.

You can view statistics using either the management console or the management CLI. In the management console, transaction statistics are available by navigating to the Transaction subsystem from the Runtime tab. From the management CLI, you can view statistics by using include-runtime=true to the read-resource operation. For example:


The following table shows the management console display name, management CLI attribute, and description for each transaction statistic.

Table 3.1. Transactions Subsystem Statistics

Display NameAttributeDescription



The number of aborted transactions.

Application Failures


The number of failed transactions, including timeouts, whose failure origin was an application.

Average Commit Time


The average time of transaction commit, in nanoseconds, measured from when the client calls commit until the transaction manager determines that it was successful.



The number of committed transactions.



The number of transactions in a heuristic state.

Inflight Transactions


The number of transactions which have begun but not yet terminated.

Nested Transactions


The total number of nested transactions created.

Number of Transactions


The total number of transactions created, including nested.

Resource Failures


The number of failed transactions whose failure origin was a resource.

System Failures


The number of transactions that have been rolled back due to internal system errors.

Timed Out


The number of transactions that have rolled back due to timeout.

3.4. Configuring the Transactions Object Store

Transactions need a place to store objects. One of the options for object storage is a JDBC datasource. If performance is a particular concern, the JDBC object store can be slower than a file system or ActiveMQ journal object store.


If the transactions subsystem is configured to use Apache ActiveMQ Artemis journal as storage type for transaction logs, then two instances of JBoss EAP are not permitted to use the same directory for storing the journal. Application server instances can not share the same location and each has to configure a unique location for it.


Losing a transaction object store can lead to losing data consistency. Thus, the object store needs to be placed on a safe drive.

Using a JDBC Datasource as a Transactions Object Store

Follow the below steps to use a JDBC datasource as a transactions object store.

  1. Create a datasource, for example, TransDS. For instructions on a non-XA datasource, see the Create a Non-XA datasource section of the JBoss EAP Configuration Guide. Note that the datasource’s JDBC driver must be installed as a core module, as described in the JBoss EAP Configuration Guide, not as a JAR deployment, for the object store to work properly.
  1. Set the datasource’s jta attribute to false.

    /subsystem=datasources/data-source=TransDS:write-attribute(name=jta, value=false)
  2. Set the jdbc-store-datasource attribute to the Java Naming and Directory Interface name for the datasource to use, for example, java:jboss/datasources/TransDS.

    /subsystem=transactions:write-attribute(name=jdbc-store-datasource, value=java:jboss/datasources/TransDS)
  3. Set the use-jdbc-store attribute to true.

    /subsystem=transactions:write-attribute(name=use-jdbc-store, value=true)
  4. Restart the JBoss EAP server for the changes to take effect.

Transactions JDBC Store Attributes

The following table identifies all of the available attributes related to JDBC object storage.


Attribute names in this table are listed as they appear in the management model, for example, when using the management CLI. See the schema definition file located at EAP_HOME/docs/schema/wildfly-txn_4_0.xsd to view the elements as they appear in the XML, as there may be differences from the management model.

Table 3.2. JDBC Store Attributes for Transactions



Set this to true to enable the JDBC store for transactions.


The Java Naming and Directory Interface name of the JDBC datasource used for storage.


Whether to drop and recreate the action store tables at launch. The default is false.


The prefix for the action store table names.


Whether to drop and recreate the communication store tables at launch. The default is false.


The prefix for the communication store table names.


Whether to drop and recreate the state store tables at launch. The default is false.


The prefix for the state store table names.

Using the ActiveMQ Journal Object Store

Follow the below steps to use an ActiveMQ journal object store.

  1. Set the use-journal-store attribute to true.

  2. Restart the JBoss EAP server for the changes to take effect.

Chapter 4. Monitoring Transactions

4.1. Configuring Logging for the Transactions Subsystem

You can control the amount of information logged about transactions, independent of other logging settings in JBoss EAP. You can configure the logging settings using the management console or the management CLI.

Configuring the Transaction Logger Using the Management Console

  1. Navigate to the Logging subsystem configuration.

    1. In the management console, click the Configuration tab. If you use a managed domain, you must choose the appropriate server profile.
    2. Select SubsystemsLoggingConfiguration and click View.
  2. Edit the com.arjuna attributes.

    Select the Categories tab. The com.arjuna entry is already present. Select com.arjuna and click Edit. You can change the log level and choose whether to use parent handlers or not.

    • Log Level:

      As transactions can produce a lot of logging output, the default logging level is set to WARN so that the server log is not overwhelmed by transaction output. If you need to check transaction processing details, use the TRACE log level so that transaction IDs are shown.

    • Use Parent Handlers:

      Parent handler indicates whether the logger should send its output to its parent logger. The default behavior is true.

  3. Click Save to save the changes.

Configuring the Transaction Logger Using the Management CLI

Use the following command to set the logging level from the management CLI. For a standalone server, remove the /profile=default from the command.


4.1.1. Enabling the TRACE Log Level

The TRACE level logging allows you diagnose Jakarta Connectors issues in JBoss EAP. You can execute the following command to enable the TRACE level logging for com.arjuna class:


For a standalone server, remove the /profile=default from the command.

4.1.2. Enabling the Transaction Bridge Logger

The transaction bridge is a layer on top of the XTS and is a layer on top of the Jakarta Transactions or JTS components of the Transaction Manager. It interacts with other parts of the JBoss EAP server. You can enable verbose logging of these components that interact with the Transaction Manager for a detailed explanation of the system’s operations.

The transaction bridge uses the logging subsystem. When running the JBoss EAP server, logging is configured from the logging subsystem configuration in the standalone-xts.xml file. Logging for the transaction bridge is useful for debugging purposes.

You can use the following management CLI command to configure the org.jboss.jbossts.txbridge logger to enable the transaction bridge logging:


This generates the following XML in the server configuration file:

<logger category="org.jboss.jbossts.txbridge">
  <level name="ALL" />

Deployment ordering issues may result in the Transaction Manager components becoming active before the logging subsystem is fully configured, including the transaction bridge. In such cases a default logging level gets applied during startup, thereby resulting in detailed debug messages being missed.

You can configure the com.arjuna logger to enable verbose logging using the following management CLI command:


This generates the following XML in the server configuration file:

<logger category="com.arjuna">
  <level name="ALL" />

4.1.3. Transaction Log Messages

You can track the transaction status while keeping the log files readable by using the DEBUG log level for the transaction logger. For detailed debugging, use the TRACE log level. Refer to Configuring Logging for the Transactions Subsystem for information on configuring the transaction logger.

Transaction Manager (TM) can generate a lot of logging information when configured to log in the TRACE log level. Following are some of the most commonly-seen messages. This list is not comprehensive, so you may see messages other than these.

Table 4.1. Transaction State Change

Transaction Begin

When a transaction begins, a method Begin of class com.arjuna.ats.arjuna.coordinator.BasicAction is executed and presented in the log with the message BasicAction::Begin() for action-id <transaction uid>.

Transaction Commit

When a transaction commits, a method Commit of class com.arjuna.ats.arjuna.coordinator.BasicAction is executed and presented in the log with the message BasicAction::Commit() for action-id <transaction uid>.

Transaction Rollback

When a transaction rolls back, a method Rollback of class com.arjuna.ats.arjuna.coordinator.BasicAction is executed and presented in the log with the message BasicAction::Rollback() for action-id <transaction uid>.

Transaction Timeout

When a transaction times out, a method doCancellations of com.arjuna.ats.arjuna.coordinator.TransactionReaper is executed and presented in log as Reaper Worker <thread id> attempting to cancel <transaction uid>. You will then see the same thread rolling back the transaction as shown above.

4.1.4. Decoding Transaction Log Files Locating the XID/UID of a Transaction

The javax.transaction.TransactionManager interface provides two ways to locate the transaction identifier:

  • You can call the toString method to print complete information about the transaction, including the identifier.
  • Alternatively, you can cast the javax.transaction.Transaction instance to a com.arjuna.ats.jta.transaction.Transaction and then call either the get_uid method, which returns the ArjunaCore Uid representation, or call the getTxId method, which returns the Xid for the global identifier, that is not the branch qualifier.

    com.arjuna.ats.jta.transaction.Transaction arjunaTM = (com.arjuna.ats.jta.transaction.Transaction)tx.getTransaction();
    System.out.println("Transaction UID" +arjunaTM.get_uid()); Finding the Transaction Status and Resources


The TransactionStatusConnectionManager object is used by the recovery modules to retrieve the status of the transaction. It acts like a proxy for TransactionStatusManager objects by maintaining a table of TransactionStatusConnector objects, each of which connects to a TransactionStatusManager object in the application process.

You can retrieve the transaction status using the getTransactionStatus method that takes a transaction Uid and, if available, a transaction type as parameters.

  1. The process Uid field in the transactions Uid parameter is used to lookup the target TransactionStatusManagerItem host-port pair in the transaction object store.
  2. The host-port pair is used to make a TCP connection to the target TransactionStatusManager object by using a TransactionStatusConnector object.
  3. The TransactionStatusConnector passes the transaction Uid and the transaction type to the TransactionStatusManager in order to retrieve the status of the transactions.

The following code example shows how to retrieve the TransactionStatusConnectionManager and check the transaction status:

// Transaction id
Uid tx = new Uid();
. . . .
TransactionStatusConnectionManager tscm = new TransactionStatusConnectionManager();

// Check if the transaction aborted
assertEquals(tscm.getTransactionStatus(tx), ActionStatus.ABORTED);

The TransactionStatusManager object acts as an interface for the Recovery Manager to obtain the status of transactions from the running application processes. One TransactionStatusManager per application process is created by the com.arjuna.ats.arjuna.coordinator.TxControl class. A TCP connection is used for communication between the Recovery Manager and TransactionStatusManager. Any free port is used by the TransactionStatusManager by default. However, the port used can be fixed using the following the property:

$ EAP_HOME/bin/ -DRecoveryEnvironmentBean.transactionStatusManagerPort=NETWORK_PORT_NUMBER
  1. On creation, the TransactionStatusManager obtains a port that is stored with the host in the object store as a TransactionStatusManagerItem.
  2. A Listener thread is started which waits for a connection request from the TransactionStatusConnector.
  3. When the connection is established, a Connection thread is created that runs the AtomicActionStatusService service. This service accepts a transaction Uid and a transaction type, if available, from the TransactionStatusConnector object.
  4. The transaction status is obtained from the local transaction table and returned back to the TransactionStatusConnector object. Viewing the Transaction History

By default, the transaction service does not maintain any history about the transactions. However, you can set the CoordinatorEnvironmentBean.enableStatistics property variable to true for the transaction service to maintain information about the number of transactions created and their respective outcomes.

You can use the following management CLI command to enable the statistics:


You can obtain more detailed transaction statistics programmatically by using the com.arjuna.ats.arjuna.coordinator.TxStats class.

Example: TxStats Class

public class TxStats
     * @return the number of transactions (top-level and nested) created so far.

    public static int numberOfTransactions();

     * @return the number of nested (sub) transactions created so far.

     public static int numberOfNestedTransactions();

     * @return the number of transactions which have terminated with heuristic
     *         outcomes.

    public static int numberOfHeuristics();
     * @return the number of committed transactions.

    public static int numberOfCommittedTransactions();

     * @return the total number of transactions which have rolled back.

    public static int numberOfAbortedTransactions();

     * @return total number of inflight (active) transactions.

    public static int numberOfInflightTransactions ();

     * @return total number of transactions rolled back due to timeout.

    public static int numberOfTimedOutTransactions ();
     * @return the number of transactions rolled back by the application.

    public static int numberOfApplicationRollbacks ();

     * @return number of transactions rolled back by participants.

    public static int numberOfResourceRollbacks ();

     * Print the current information.

    public static void printStatus( pw);

The com.arjuna.ats.arjuna.coordinator.ActionManager class provides further information about specific active transactions using the getNumberOfInflightTransactions method that returns the list of currently active transactions.

Chapter 5. Handling Transaction Manager Exceptions

5.1. Debugging a Timed-out Transaction

There can be many reasons for a transaction timeout, such as:

  • Slow server performance
  • Thread is stuck waiting for something or hangs up
  • Thread needs more than the configured transaction timeout time to complete the processing

You can look at the logs for following error message to identify a timed-out transaction:

WARN ARJUNA012117 "TransactionReaper::check timeout for TX {0} in state {1}"

where {0} is the Uid of the transaction and {1} is the transaction manager’s view of the state {1} of the timed-out transaction.

Transaction Manager provides the following options to debug the transaction timeouts:

  • You can configure timeout values for transactions to control the transaction lifetimes. The transactions subsystem rolls back the transaction if the timeout value elapses before a transaction terminates because of committing or rolling back.
  • You can use the setTransactionTimeout method of the XAResource interface to propagate the current transaction to the resource manager. If supported, this operation overrides any default timeout associated with the resource manager. Overriding the timeout is useful in situations like the following:

    • when long-running transactions have lifetimes that exceed the default
    • when using the default timeout might cause the resource manager to roll back before the transaction terminates, causing the transaction to roll back as well.
  • If you do not specify a timeout value or use a value of 0, transaction manager uses an implementation-specific default value. In JBoss EAP transaction manager, the CoordinatorEnvironmentBean.defaultTimeout property represents this implementation-specific default value. The default value is 300 seconds. A value of 0 disables the default transaction timeouts.

    You can modify the default transaction timeout using the following management CLI command:


    When running in a managed domain, you must specify which profile to update by preceding the command with /profile=PROFILE_NAME

  • JBoss EAP Transaction Manager supports an all-or-nothing approach to call the setTransactionTimeout method on the XAResource instances. You can set the JTAEnvironmentBean.xaTransactionTimeoutEnabled property to true, which is the default, to call the method on all the instances. Otherwise, you can use the setXATransactionTimeoutEnabled method of the com.arjuna.ats.jta.common.JTAEnvironmentBean class to disable timeout and specify them on a per-transaction basis.

5.2. Migrating Logs to a New JBoss EAP Server


Ensure that the transactions subsystem is configured identically between the old and the new JBoss EAP. An identical configuration, which includes the list of Jakarta Transactions datasources, is required because any logs that need to be recovered must contact the datasources.

5.2.1. Migrating the File-based Log Storage

To migrate the transaction manager logs to a new JBoss EAP server, you can copy the logs to the new JBoss EAP server.

You can use the following commands to copy the file-based logs:

  1. Browse to your EAP_HOME directory.
  2. Create an archive of the logs using the following command:

    $ tar -cf logs.tar ./standalone/data/tx-object-store
  3. Extract the archived logs to the new EAP_HOME directory using the following command:

    $ tar -xf logs.tar -C NEW_EAP_HOME

5.2.2. Migrating the JDBC Store-based Log Storage

  • You can configure the new JBoss EAP server to use the old database and tables as described in Using a JDBC as a Transactions Object Store.
  • Alternatively, you can determine the database and the tables used for the transaction logs. Then, you can use an SQL tool to back up the tables and restore them to the new database.


    You can find an SQL query tool in the h2 JAR file shipped with JBoss EAP.

5.3. Enabling XTS on JBoss EAP

XML Transaction Service (XTS) component of the transaction manager supports the coordination of private and public web services in a business transaction. XTS provides WS-AT and WS-BA support for web services hosted on the JBoss EAP server. It is an optional subsystem, which can be enabled using the standalone-xts.xml configuration.

Starting JBoss EAP Server with XTS Enabled

  1. Change to the JBoss EAP server directory:

    cd $EAP_HOME
  2. Copy the example XTS configuration file into the /configuration directory:

    cp docs/examples/configs/standalone-xts.xml standalone/configuration
  3. Start the JBoss EAP server, specifying the xts configuration:


    bin/ --server-config=standalone-xts.xml


    bin\standalone.bat --server-config=standalone-xts.xml

5.4. Clearing Up Expired Transactions

The following properties allow you to clear up the expired transactions:


When the Recovery Manager initializes an expiry scanner thread, the ExpiryEntryMonitor object is created, which is used to remove dead items from the object store. A number of scanner modules are loaded dynamically, which removes the dead items for a particular type.

You can configure the scanner modules in the properties file using the RecoveryEnvironmentBean.expiryScanners system property. The scanner modules are loaded at the time of initialization.

$ EAP_HOME/bin/ -DRecoveryEnvironmentBean.expiryScanners=CLASSNAME1,CLASSNAME2

All the scanner modules are called periodically to scan for dead items by the ExpiryEntryMonitor thread. You can configure this period, in hours, using the expiryScanInterval system property, as shown in the example below:

$ EAP_HOME/bin/ -DRecoveryEnvironmentBean.expiryScanInterval=EXPIRY_SCAN_INTERVAL

All scanner modules inherit the same behavior from the ExpiryScanner interface. This interface provides a scan method that is implemented by all the scanner modules, including the following. The scanner thread calls this scan method.


The ExpiredTransactionStatusManagerScanner removes the dead TransactionStatusManagerItems from the object store. These items remain in the object store for a certain period before they are deleted, which is 12 hours by default. You can configure this time period, in hours, using the transactionStatusManagerExpiryTime system property as shown in the example below:

$ EAP_HOME/bin/ -DRecoveryEnvironmentBean.transactionStatusManagerExpiryTime=TRANSACTION_STATUS_MANAGER_EXPIRY_TIME

The AtomicActionExpiryScanner moves transaction logs for AtomicActions that are assumed to have completed. For example, if a failure occurs after a participant has been told to commit but before the transactions subsystem can update the logs, then upon recovery the JBoss EAP transaction manager attempts to replay the commit request. This replay will obviously fail, thus preventing the log from being removed. The AtomicActionExpiryScanner is also used when logs cannot be recovered automatically for reasons such as being corrupt or zero length. All logs are moved to a specific location based on the old location appended with /Expired.


AtomicActionExpiryScanner is disabled by default. You can enable it by adding it to the transaction manager properties file. You need not enable it to cope with corrupt logs.

5.5. Recovering Heuristic Outcomes

A heuristic completion occurs when a transaction resource makes a one-sided decision, during the completion stage of a distributed transaction, to commit or rollback the transaction updates. This can leave distributed data in an indeterminate state. Network failures or resource timeouts are possible causes for heuristic completion. Heuristic completion throws one of the following heuristic outcome exceptions:

This exception is thrown when the transaction manager decides to rollback, but somehow all the resources had already committed on their own. In this case, you need not do anything because a consistent termination was reached.
This exception implies that the resources have all done a rollback because the commit decision from the transaction manager was delayed. Similar to HEURISTIC_COMMIT, in this case also you need not do anything because a consistent termination was reached.
This exception occurs when the disposition of some of the updates is unknown. For those that are known, they have either all been committed or all rolled back.
This exception occurs when some parts of the transaction were rolled back while others were committed.

This procedure shows how to handle a heuristic outcome of a transaction using the Jakarta Transactions.

  1. The cause of a heuristic outcome in a transaction is that a resource manager promised it could commit or rollback, and then failed to fulfill the promise. This could be due to a problem with a third-party component, the integration layer between the third-party component and JBoss EAP, or JBoss EAP itself.

    By far, the most common two causes of heuristic errors are transient failures in the environment and coding errors dealing with resource managers.

  2. Usually, if there is a transient failure in your environment, you will know about it before you find out about the heuristic error. This could be due to a network outage, hardware failure, database failure, power outage, or a host of other things.

    If you come across a heuristic outcome in a test environment during stress testing, it implies weaknesses in your test environment.


    JBoss EAP automatically recovers transactions that were in a non-heuristic state at the time of failure, but it does not attempt to recover the heuristic transactions.

  3. If you have no obvious failure in your environment, or if the heuristic outcome is easily reproducible, it is probably due to a coding error. You must contact the third-party vendors to find out if a solution is available.

    If you suspect the problem is in the transaction manager of JBoss EAP itself, you must raise a support ticket.

  4. You can attempt to recover the transaction manually using the management CLI. For instructions on manually recovering a transaction, see the Recovering a Transaction Participant section.
  5. The process of resolving the transaction outcome manually is dependent on the exact circumstance of the failure. Perform the following steps, as applicable to your environment:

    1. Identify which resource managers were involved.
    2. Examine the state of the transaction manager and the resource managers.
    3. Manually force log cleanup and data reconciliation in one or more of the involved components.
  6. In a test environment, or if you do not care about the integrity of the data, deleting the transaction logs and restarting JBoss EAP gets rid of the heuristic outcome. By default, the transaction logs are located in the EAP_HOME/standalone/data/tx-object-store/ directory for a standalone server, or the EAP_HOME/domain/servers/SERVER_NAME/data/tx-object-store/ directory in a managed domain. In the case of a managed domain, SERVER_NAME refers to the name of the individual server participating in a server group.


    The location of the transaction log also depends on the object store in use and the values set for the object-store-relative-to and object-store-path parameters. For file system logs, such as a standard shadow and Apache ActiveMQ Artemis logs, the default directory location is used, but when using a JDBC object store, the transaction logs are stored in a database.

5.5.1. Guidelines on Making Decisions for Heuristic Outcomes

Problem Detection

A heuristic decision is one of the most critical errors that can happen in a transaction system. It can lead to parts of the transaction being committed, while other parts are rolled back. Thus, it can violate the atomicity property of the transaction and can possibly lead to corruption of the data integrity.

A recoverable resource maintains all the information about the heuristic decision in stable storage until it is required by the transaction manager. The actual data saved in stable storage depends on the type of recoverable resource and is not standardized. You can parse through the data and possibly edit the resource to correct any data integrity problems.

Heuristic outcomes are stored in the server log and can be identified using the resource manager and transaction manager.

Manually Committing or Rolling Back a Transaction

Generally, you cannot manually commit or rollback a transaction. From the JBoss EAP transaction management perspective, you can move a transaction back to the pending list for automated recovery to try again or delete the record. For example:

You can use the read-resource operation to check the status of the participants in the transaction:


The result will look similar to this:

   "outcome" => "success",
   "result" => {
       "eis-product-name" => "ArtemisMQ",
       "eis-product-version" => "2.0",
       "jndi-name" => "java:/JmsXA",
       "status" => "HEURISTIC_HAZARD",
       "type" => "/StateManager/AbstractRecord/XAResourceRecord"

The outcome status shown here is a HEURISTIC_HAZARD state and is eligible for recovery.

Recovering the HEURISTIC_HAZARD Exception

The following steps show an example of how to recover a hazard type heuristic outcome.

  1. To begin the recovery, you must consult each resource manager and establish the outcomes of the various branches that are identifiable from the transaction manager tooling. However, you should not need to force a resource manager to commit or rollback. You must rather inspect the resource manager to know the state of the heuristic exception.

    The following are reference links for listing and resolving heuristic outcomes for various resource managers:


    These links are for reference purpose only and are subject to change. Please consult the vendor documentation for details.

  2. You must execute the recover operation, as shown in the following example:


    Running the recover operation changes the state of the transaction to PREPARE and triggers a recovery attempt by replaying the commit operation. If the recovery attempt is successful, the participant is removed from the transaction log.

    You can verify this by running the probe operation on the log-store element again. The participant should no longer be listed. If this is the last participant, the transaction is also deleted.


If the heuristic outcome is a rollback type, then:

  • The resource should not be able to commit the transaction, provided the resource manager is well implemented.
  • You must decide whether you should delete the branch from the resource manager, using a forget call, so that the rest of the transaction can commit normally and be cleaned from the transaction store.
  • If you do not delete the branch from the resource manager, then the transaction will remain in the transaction store forever.

On the other hand, if the heuristic outcome was a commit type, then you must use the business semantics to deal with the inconsistent outcome.

Further Actions When Manual Reconciliation Fails

You can check the database transaction table, which is the DBA_2PC_PENDING table for Oracle. However, these will depend upon the specific resource managers. Transaction Manager can provide you with the branches to inspect in each resource manager.

You should consult the vendor’s documentation on this resource manager for details. If you suspect that the problem is caused by the third party resource manager, you must consider raising a support ticket with your supplier.

Revised on 2020-09-03 09:24:55 UTC

Legal Notice

Copyright © 2020 Red Hat, Inc.
The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.
Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.
Red Hat, Red Hat Enterprise Linux, the Shadowman logo, the Red Hat logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.
Linux® is the registered trademark of Linus Torvalds in the United States and other countries.
Java® is a registered trademark of Oracle and/or its affiliates.
XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.
MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.
Node.js® is an official trademark of Joyent. Red Hat is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.
The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.
All other trademarks are the property of their respective owners.