org.apache.commons.configuration

Class AbstractFileConfiguration

java.lang.Object

org.apache.commons.configuration.event.EventSource

org.apache.commons.configuration.AbstractConfiguration

org.apache.commons.configuration.BaseConfiguration

org.apache.commons.configuration.AbstractFileConfiguration

All Implemented Interfaces:

Cloneable, Configuration, FileConfiguration

Direct Known Subclasses:

AbstractHierarchicalFileConfiguration.FileConfigurationDelegate, INIConfiguration, PropertiesConfiguration

public abstract class AbstractFileConfiguration
extends BaseConfiguration
implements FileConfiguration

Partial implementation of the FileConfiguration interface. Developers of file based configuration may want to extend this class, the two methods left to implement are FileConfiguration.load(Reader) and FileConfiguration.save(Writer).

This base class already implements a couple of ways to specify the location of the file this configuration is based on. The following possibilities exist:

• URLs: With the method setURL() a full URL to the configuration source can be specified. This is the most flexible way. Note that the save() methods support only file: URLs.
• Files: The setFile() method allows to specify the configuration source as a file. This can be either a relative or an absolute file. In the former case the file is resolved based on the current directory.
• As file paths in string form: With the setPath() method a full path to a configuration file can be provided as a string.
• Separated as base path and file name: This is the native form in which the location is stored. The base path is a string defining either a local directory or a URL. It can be set using the setBasePath() method. The file name, non surprisingly, defines the name of the configuration file.

Note that the load() methods do not wipe out the configuration's content before the new configuration file is loaded. Thus it is very easy to construct a union configuration by simply loading multiple configuration files, e.g.

 config.load(configFile1);
 config.load(configFile2);
 

After executing this code fragment, the resulting configuration will contain both the properties of configFile1 and configFile2. On the other hand, if the current configuration file is to be reloaded, clear() should be called first. Otherwise the properties are doubled. This behavior is analogous to the behavior of the load(InputStream) method in java.util.Properties.

Since:

1.0-rc2

Version:

$Revision$, $Date$

Author:

Emmanuel Bourg

Field Summary

Fields

Modifier and Type	Field and Description
protected boolean	autoSave The auto save flag.
protected String	basePath Stores the base path.
static int	EVENT_RELOAD Constant for the configuration reload event.
protected String	fileName Stores the file name.
protected ReloadingStrategy	strategy Holds a reference to the reloading strategy.

Fields inherited from class org.apache.commons.configuration.AbstractConfiguration

END_TOKEN, EVENT_ADD_PROPERTY, EVENT_CLEAR, EVENT_CLEAR_PROPERTY, EVENT_READ_PROPERTY, EVENT_SET_PROPERTY, START_TOKEN

Constructor Summary

Constructors

Constructor and Description
AbstractFileConfiguration() Default constructor
AbstractFileConfiguration(File file) Creates and loads the configuration from the specified file.
AbstractFileConfiguration(String fileName) Creates and loads the configuration from the specified file.
AbstractFileConfiguration(URL url) Creates and loads the configuration from the specified URL.

Method Summary

Methods

Modifier and Type	Method and Description
void	addProperty(String key, Object value) Adds a new property to this configuration.
void	clearProperty(String key) Removes the specified property from this configuration.
Object	clone() Creates a copy of this configuration.
boolean	containsKey(String key) check if the configuration contains the key
protected void	enterNoReload() Enters the "No reloading mode".
protected void	exitNoReload() Leaves the "No reloading mode".
protected void	fireEvent(int type, String propName, Object propValue, boolean before) Sends an event to all registered listeners.
String	getBasePath() Return the base path.
String	getEncoding() Return the encoding used to store the configuration file.
File	getFile() Return the file where the configuration is stored.
String	getFileName() Return the name of the file.
Iterator	getKeys() Returns an Iterator with the keys contained in this configuration.
String	getPath() Returns the full path to the file this configuration is based on.
Object	getProperty(String key) Read property from underlying map.
ReloadingStrategy	getReloadingStrategy() Return the reloading strategy.
URL	getURL() Return the URL where the configuration is stored.
boolean	isAutoSave() Tells if properties are automatically saved to the disk.
boolean	isEmpty() Check if the configuration is empty
void	load() Load the configuration from the underlying location.
void	load(File file) Load the configuration from the specified file.
void	load(InputStream in) Load the configuration from the specified stream, using the encoding returned by getEncoding().
void	load(InputStream in, String encoding) Load the configuration from the specified stream, using the specified encoding.
void	load(String fileName) Locate the specified file and load the configuration.
void	load(URL url) Load the configuration from the specified URL.
protected void	possiblySave() Save the configuration if the automatic persistence is enabled and if a file is specified.
void	reload() Performs a reload operation if necessary.
void	save() Save the configuration.
void	save(File file) Save the configuration to the specified file.
void	save(OutputStream out) Save the configuration to the specified stream, using the encoding returned by getEncoding().
void	save(OutputStream out, String encoding) Save the configuration to the specified stream, using the specified encoding.
void	save(String fileName) Save the configuration to the specified file.
void	save(URL url) Save the configuration to the specified URL.
void	setAutoSave(boolean autoSave) Enable or disable the automatical saving of modified properties to the disk.
void	setBasePath(String basePath) Sets the base path.
void	setEncoding(String encoding) Set the encoding used to store the configuration file.
void	setFile(File file) Set the file where the configuration is stored.
void	setFileName(String fileName) Set the name of the file.
void	setPath(String path) Sets the location of this configuration as a full or relative path name.
void	setProperty(String key, Object value) Sets a new value for the specified property.
void	setReloadingStrategy(ReloadingStrategy strategy) Set the reloading strategy.
void	setURL(URL url) Set the location of this configuration as a URL.

Methods inherited from class org.apache.commons.configuration.BaseConfiguration

addPropertyDirect, clear, clearPropertyDirect

Methods inherited from class org.apache.commons.configuration.AbstractConfiguration

addErrorLogListener, append, copy, createInterpolator, getBigDecimal, getBigDecimal, getBigInteger, getBigInteger, getBoolean, getBoolean, getBoolean, getByte, getByte, getByte, getDefaultListDelimiter, getDelimiter, getDouble, getDouble, getDouble, getFloat, getFloat, getFloat, getInt, getInt, getInteger, getInterpolator, getKeys, getList, getList, getListDelimiter, getLogger, getLong, getLong, getLong, getProperties, getProperties, getShort, getShort, getShort, getString, getString, getStringArray, getSubstitutor, interpolate, interpolate, interpolatedConfiguration, interpolateHelper, isDelimiterParsingDisabled, isThrowExceptionOnMissing, resolveContainerStore, setDefaultListDelimiter, setDelimiter, setDelimiterParsingDisabled, setListDelimiter, setLogger, setThrowExceptionOnMissing, subset

Methods inherited from class org.apache.commons.configuration.event.EventSource

addConfigurationListener, addErrorListener, clearConfigurationListeners, clearErrorListeners, createErrorEvent, createEvent, fireError, getConfigurationListeners, getErrorListeners, isDetailEvents, removeConfigurationListener, removeErrorListener, setDetailEvents

Methods inherited from class java.lang.Object

equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Methods inherited from interface org.apache.commons.configuration.FileConfiguration

load, save

Methods inherited from interface org.apache.commons.configuration.Configuration

clear, getBigDecimal, getBigDecimal, getBigInteger, getBigInteger, getBoolean, getBoolean, getBoolean, getByte, getByte, getByte, getDouble, getDouble, getDouble, getFloat, getFloat, getFloat, getInt, getInt, getInteger, getKeys, getList, getList, getLong, getLong, getLong, getProperties, getShort, getShort, getShort, getString, getString, getStringArray, subset

Field Detail

EVENT_RELOAD

public static final int EVENT_RELOAD

Constant for the configuration reload event.

See Also:

Constant Field Values

fileName

protected String fileName

Stores the file name.

basePath

protected String basePath

Stores the base path.

autoSave

protected boolean autoSave

The auto save flag.

strategy

protected ReloadingStrategy strategy

Holds a reference to the reloading strategy.

Constructor Detail

AbstractFileConfiguration

public AbstractFileConfiguration()

Default constructor

Since:

1.1

AbstractFileConfiguration

public AbstractFileConfiguration(String fileName)
                          throws ConfigurationException

Creates and loads the configuration from the specified file. The passed in string must be a valid file name, either absolute or relativ.

Parameters:

fileName - The name of the file to load.

Throws:

ConfigurationException - Error while loading the file

Since:

1.1

AbstractFileConfiguration

public AbstractFileConfiguration(File file)
                          throws ConfigurationException

Creates and loads the configuration from the specified file.

Parameters:

file - The file to load.

Throws:

ConfigurationException - Error while loading the file

Since:

1.1

AbstractFileConfiguration

public AbstractFileConfiguration(URL url)
                          throws ConfigurationException

Creates and loads the configuration from the specified URL.

Parameters:

url - The location of the file to load.

Throws:

ConfigurationException - Error while loading the file

Since:

1.1

Method Detail

load

public void load()
          throws ConfigurationException

Load the configuration from the underlying location.

Specified by:

load in interface FileConfiguration

Throws:

ConfigurationException - if loading of the configuration fails

load

public void load(String fileName)
          throws ConfigurationException

Locate the specified file and load the configuration. This does not change the source of the configuration (i.e. the internally maintained file name). Use one of the setter methods for this purpose.

Specified by:

load in interface FileConfiguration

Parameters:

fileName - the name of the file to be loaded

Throws:

ConfigurationException - if an error occurs

load

public void load(File file)
          throws ConfigurationException

Load the configuration from the specified file. This does not change the source of the configuration (i.e. the internally maintained file name). Use one of the setter methods for this purpose.

Specified by:

load in interface FileConfiguration

Parameters:

file - the file to load

Throws:

ConfigurationException - if an error occurs

load

public void load(URL url)
          throws ConfigurationException

Load the configuration from the specified URL. This does not change the source of the configuration (i.e. the internally maintained file name). Use on of the setter methods for this purpose.

Specified by:

load in interface FileConfiguration

Parameters:

url - the URL of the file to be loaded

Throws:

ConfigurationException - if an error occurs

load

public void load(InputStream in)
          throws ConfigurationException

Load the configuration from the specified stream, using the encoding returned by getEncoding().

Specified by:

load in interface FileConfiguration

Parameters:

in - the input stream

Throws:

ConfigurationException - if an error occurs during the load operation

load

public void load(InputStream in,
        String encoding)
          throws ConfigurationException

Load the configuration from the specified stream, using the specified encoding. If the encoding is null the default encoding is used.

Specified by:

load in interface FileConfiguration

Parameters:

in - the input stream

encoding - the encoding used. null to use the default encoding

Throws:

ConfigurationException - if an error occurs during the load operation

save

public void save()
          throws ConfigurationException

Save the configuration. Before this method can be called a valid file name must have been set.

Specified by:

save in interface FileConfiguration

Throws:

ConfigurationException - if an error occurs or no file name has been set yet

save

public void save(String fileName)
          throws ConfigurationException

Save the configuration to the specified file. This doesn't change the source of the configuration, use setFileName() if you need it.

Specified by:

save in interface FileConfiguration

Parameters:

fileName - the file name

Throws:

ConfigurationException - if an error occurs during the save operation

save

public void save(URL url)
          throws ConfigurationException

Save the configuration to the specified URL. This doesn't change the source of the configuration, use setURL() if you need it.

Specified by:

save in interface FileConfiguration

Parameters:

url - the URL

Throws:

ConfigurationException - if an error occurs during the save operation

save

public void save(File file)
          throws ConfigurationException

Save the configuration to the specified file. The file is created automatically if it doesn't exist. This doesn't change the source of the configuration, use setFile(java.io.File) if you need it.

Specified by:

save in interface FileConfiguration

Parameters:

file - the target file

Throws:

ConfigurationException - if an error occurs during the save operation

save

public void save(OutputStream out)
          throws ConfigurationException

Save the configuration to the specified stream, using the encoding returned by getEncoding().

Specified by:

save in interface FileConfiguration

Parameters:

out - the output stream

Throws:

ConfigurationException - if an error occurs during the save operation

save

public void save(OutputStream out,
        String encoding)
          throws ConfigurationException

Save the configuration to the specified stream, using the specified encoding. If the encoding is null the default encoding is used.

Specified by:

save in interface FileConfiguration

Parameters:

out - the output stream

encoding - the encoding to use

Throws:

ConfigurationException - if an error occurs during the save operation

getFileName

public String getFileName()

Return the name of the file.

Specified by:

getFileName in interface FileConfiguration

Returns:

the file name

setFileName

public void setFileName(String fileName)

Set the name of the file. The passed in file name can contain a relative path. It must be used when referring files with relative paths from classpath. Use setPath() to set a full qualified file name.

Specified by:

setFileName in interface FileConfiguration

Parameters:

fileName - the name of the file

getBasePath

public String getBasePath()

Return the base path.

Specified by:

getBasePath in interface FileConfiguration

Returns:

the base path

See Also:

FileConfiguration.getBasePath()

setBasePath

public void setBasePath(String basePath)

Sets the base path. The base path is typically either a path to a directory or a URL. Together with the value passed to the setFileName() method it defines the location of the configuration file to be loaded. The strategies for locating the file are quite tolerant. For instance if the file name is already an absolute path or a fully defined URL, the base path will be ignored. The base path can also be a URL, in which case the file name is interpreted in this URL's context. Because the base path is used by some of the derived classes for resolving relative file names it should contain a meaningful value. If other methods are used for determining the location of the configuration file (e.g. setFile() or setURL()), the base path is automatically set.

Specified by:

setBasePath in interface FileConfiguration

Parameters:

basePath - the base path.

getFile

public File getFile()

Return the file where the configuration is stored. If the base path is a URL with a protocol different than "file", or the configuration file is within a compressed archive, the return value will not point to a valid file object.

Specified by:

getFile in interface FileConfiguration

Returns:

the file where the configuration is stored; this can be null

setFile

public void setFile(File file)

Set the file where the configuration is stored. The passed in file is made absolute if it is not yet. Then the file's path component becomes the base path and its name component becomes the file name.

Specified by:

setFile in interface FileConfiguration

Parameters:

file - the file where the configuration is stored

getPath

public String getPath()

Returns the full path to the file this configuration is based on. The return value is a valid File path only if this configuration is based on a file on the local disk. If the configuration was loaded from a packed archive the returned value is the string form of the URL from which the configuration was loaded.

Returns:

the full path to the configuration file

setPath

public void setPath(String path)

Sets the location of this configuration as a full or relative path name. The passed in path should represent a valid file name on the file system. It must not be used to specify relative paths for files that exist in classpath, either plain file system or compressed archive, because this method expands any relative path to an absolute one which may end in an invalid absolute path for classpath references.

Parameters:

path - the full path name of the configuration file

getURL

public URL getURL()

Return the URL where the configuration is stored.

Specified by:

getURL in interface FileConfiguration

Returns:

the configuration's location as URL

setURL

public void setURL(URL url)

Set the location of this configuration as a URL. For loading this can be an arbitrary URL with a supported protocol. If the configuration is to be saved, too, a URL with the "file" protocol should be provided.

Specified by:

setURL in interface FileConfiguration

Parameters:

url - the location of this configuration as URL

setAutoSave

public void setAutoSave(boolean autoSave)

Description copied from interface: FileConfiguration

Enable or disable the automatical saving of modified properties to the disk.

Specified by:

setAutoSave in interface FileConfiguration

Parameters:

autoSave - true to enable, false to disable

isAutoSave

public boolean isAutoSave()

Description copied from interface: FileConfiguration

Tells if properties are automatically saved to the disk.

Specified by:

isAutoSave in interface FileConfiguration

Returns:

true if auto-saving is enabled, false otherwise

possiblySave

protected void possiblySave()

Save the configuration if the automatic persistence is enabled and if a file is specified.

addProperty

public void addProperty(String key,
               Object value)

Adds a new property to this configuration. This implementation checks if the auto save mode is enabled and saves the configuration if necessary.

Specified by:

addProperty in interface Configuration

Overrides:

addProperty in class AbstractConfiguration

Parameters:

key - the key of the new property

value - the value

setProperty

public void setProperty(String key,
               Object value)

Sets a new value for the specified property. This implementation checks if the auto save mode is enabled and saves the configuration if necessary.

Specified by:

setProperty in interface Configuration

Overrides:

setProperty in class AbstractConfiguration

Parameters:

key - the key of the affected property

value - the value

clearProperty

public void clearProperty(String key)

Description copied from class: AbstractConfiguration

Removes the specified property from this configuration. This implementation performs some preparations and then delegates to clearPropertyDirect(), which will do the real work.

Specified by:

clearProperty in interface Configuration

Overrides:

clearProperty in class AbstractConfiguration

Parameters:

key - the key to be removed

getReloadingStrategy

public ReloadingStrategy getReloadingStrategy()

Description copied from interface: FileConfiguration

Return the reloading strategy.

Specified by:

getReloadingStrategy in interface FileConfiguration

Returns:

the reloading strategy currently used

setReloadingStrategy

public void setReloadingStrategy(ReloadingStrategy strategy)

Description copied from interface: FileConfiguration

Set the reloading strategy.

Specified by:

setReloadingStrategy in interface FileConfiguration

Parameters:

strategy - the reloading strategy to use

reload

public void reload()

Performs a reload operation if necessary. This method is called on each access of this configuration. It asks the associated reloading strategy whether a reload should be performed. If this is the case, the configuration is cleared and loaded again from its source. If this operation causes an exception, the registered error listeners will be notified. The error event passed to the listeners is of type EVENT_RELOAD and contains the exception that caused the event.

Specified by:

reload in interface FileConfiguration

enterNoReload

protected void enterNoReload()

Enters the "No reloading mode". As long as this mode is active no reloading will be performed. This is necessary for some implementations of save() in derived classes, which may cause a reload while accessing the properties to save. This may cause the whole configuration to be erased. To avoid this, this method can be called first. After a call to this method there always must be a corresponding call of exitNoReload() later! (If necessary, finally blocks must be used to ensure this.

exitNoReload

protected void exitNoReload()

Leaves the "No reloading mode".

See Also:

enterNoReload()

fireEvent

protected void fireEvent(int type,
             String propName,
             Object propValue,
             boolean before)

Sends an event to all registered listeners. This implementation ensures that no reloads are performed while the listeners are invoked. So infinite loops can be avoided that can be caused by event listeners accessing the configuration's properties when they are invoked.

Overrides:

fireEvent in class EventSource

Parameters:

type - the event type

propName - the name of the property

propValue - the value of the property

before - the before update flag

getProperty

public Object getProperty(String key)

Description copied from class: BaseConfiguration

Read property from underlying map.

Specified by:

getProperty in interface Configuration

Overrides:

getProperty in class BaseConfiguration

Parameters:

key - key to use for mapping

Returns:

object associated with the given configuration key.

isEmpty

public boolean isEmpty()

Description copied from class: BaseConfiguration

Check if the configuration is empty

Specified by:

isEmpty in interface Configuration

Overrides:

isEmpty in class BaseConfiguration

Returns:

true if Configuration is empty, false otherwise.

containsKey

public boolean containsKey(String key)

Description copied from class: BaseConfiguration

check if the configuration contains the key

Specified by:

containsKey in interface Configuration

Overrides:

containsKey in class BaseConfiguration

Parameters:

key - the configuration key

Returns:

true if Configuration contain given key, false otherwise.

getKeys

public Iterator getKeys()

Returns an Iterator with the keys contained in this configuration. This implementation performs a reload if necessary before obtaining the keys. The Iterator returned by this method points to a snapshot taken when this method was called. Later changes at the set of keys (including those caused by a reload) won't be visible. This is because a reload can happen at any time during iteration, and it is impossible to determine how this reload affects the current iteration. When using the iterator a client has to be aware that changes of the configuration are possible at any time. For instance, if after a reload operation some keys are no longer present, the iterator will still return those keys because they were found when it was created.

Specified by:

getKeys in interface Configuration

Overrides:

getKeys in class BaseConfiguration

Returns:

an Iterator with the keys of this configuration

getEncoding

public String getEncoding()

Description copied from interface: FileConfiguration

Return the encoding used to store the configuration file. If the value is null the default encoding is used.

Specified by:

getEncoding in interface FileConfiguration

Returns:

the current encoding

setEncoding

public void setEncoding(String encoding)

Description copied from interface: FileConfiguration

Set the encoding used to store the configuration file. Set the encoding to null to use the default encoding.

Specified by:

setEncoding in interface FileConfiguration

Parameters:

encoding - the encoding to use

clone

public Object clone()

Creates a copy of this configuration. The new configuration object will contain the same properties as the original, but it will lose any connection to a source file (if one exists); this includes setting the source URL, base path, and file name to null. This is done to avoid race conditions if both the original and the copy are modified and then saved.

Overrides:

clone in class BaseConfiguration

Returns:

the copy

Since:

1.3