Package org.infinispan.context

Enum Flag

java.lang.Object
java.lang.Enum<Flag>
org.infinispan.context.Flag
All Implemented Interfaces:
Serializable, Comparable<Flag>
public enum Flag extends Enum<Flag>
Available flags, which may be set on a per-invocation basis. These are provided using the AdvancedCache interface, using some of the overloaded methods that allow passing in of a variable number of Flags. When making modifications to these enum, do not change the order of enumerations, so always append any new enumerations after the last one. Finally, enumerations should not be removed.
Since:
4.0
Author:
Manik Surtani, Galder Zamarreño

  • Enum Constant Details

    • ZERO_LOCK_ACQUISITION_TIMEOUT

      public static final Flag ZERO_LOCK_ACQUISITION_TIMEOUT
      Overrides the LockingConfiguration.lockAcquisitionTimeout(long) configuration setting by ensuring lock managers use a 0-millisecond lock acquisition timeout. Useful if you only want to acquire a lock on an entry if and only if the lock is uncontended.

    • CACHE_MODE_LOCAL

      public static final Flag CACHE_MODE_LOCAL
      Forces LOCAL mode operation, even if the cache is configured to use a clustered mode like replication, invalidation or distribution. Applying this flag will suppress any RPC messages otherwise associated with this invocation. Write operations mat not acquire the entry locks. In distributed mode, the modifications performed during an operation in a non-owner node are going to L1, if it is enabled, otherwise the operation is a no-op in that node.

    • SKIP_LOCKING

      public static final Flag SKIP_LOCKING
      Bypasses lock acquisition for this invocation altogether. A potentially dangerous flag, as it can lead to inconsistent data: a Lock is needed to make sure the same value is written to each node replica; a lock is also needed to guarantee that several writes on the same key are not applied out of order to an async CacheLoader storage engine. So this flag is useful only as an optimization when the same key is written once and never again, or as an unsafe optimisation if the period between writes on the same key is large enough to make a race condition never happen in practice. If this is unclear, avoid it.

    • FORCE_WRITE_LOCK

      public static final Flag FORCE_WRITE_LOCK
      Forces a write lock, even if the invocation is a read operation. Useful when reading an entry to later update it within the same transaction, and is analogous in behavior and use case to a select ... for update ... SQL statement.

    • FORCE_ASYNCHRONOUS

      public static final Flag FORCE_ASYNCHRONOUS
      Forces asynchronous network calls where possible, even if otherwise configured to use synchronous network calls. Only applicable to non-local, clustered caches.

    • FORCE_SYNCHRONOUS

      public static final Flag FORCE_SYNCHRONOUS
      Forces synchronous network calls where possible, even if otherwise configured to use asynchronous network calls. Only applicable to non-local, clustered caches.

    • SKIP_CACHE_STORE

      public static final Flag SKIP_CACHE_STORE
      Skips storing an entry to any configured CacheLoaders.

    • SKIP_CACHE_LOAD

      public static final Flag SKIP_CACHE_LOAD
      Skips loading an entry from any configured CacheLoaders. Useful for example to perform a BasicCache.put(Object, Object) operation while not interested in the return value (i.e. the previous value of the key).
      Note that the loader will be skipped even if that changes the meaning of the operation, e.g. for conditional write operations. If that is not intended, you should use IGNORE_RETURN_VALUES instead.

    • FAIL_SILENTLY

      public static final Flag FAIL_SILENTLY

      Swallows any exceptions, logging them instead at a low log level. Will prevent a failing operation from affecting any ongoing JTA transactions as well.

      This Flag will not be replicated to remote nodes, but it will still protect the invoker from remote exceptions.

      When using this flag with Optimistic caches, lock acquisition happen in the prepare phase at which point this flag will be ignored in order to ensure that Infinispan reports the correct exception back to the transaction manager. This is done for safety reasons to avoid inconsistent cache contents.

    • SKIP_REMOTE_LOOKUP

      public static final Flag SKIP_REMOTE_LOOKUP
      When used with distributed cache mode, will prevent retrieving a remote value either when executing a Map.get(Object) or Map.containsKey(Object), or to return the overwritten value for BasicCache.put(Object, Object) or BasicCache.remove(Object). This would render return values for most operations unusable, in exchange for the performance gains of reducing remote calls.
      Note that the remote lookup will be skipped even if that changes the meaning of the operation, e.g. for conditional write operations. If that is not intended, you should use IGNORE_RETURN_VALUES instead.

    • SKIP_INDEXING

      public static final Flag SKIP_INDEXING
      Used by the Query module only, it will prevent the indexes to be updated as a result of the current operations.

    • PUT_FOR_EXTERNAL_READ

      public static final Flag PUT_FOR_EXTERNAL_READ
      Flags the invocation as a Cache.putForExternalRead(Object, Object) call, as opposed to a regular BasicCache.put(Object, Object). This flag was created purely for internal Infinispan usage, and should not be used by clients calling into Infinispan.

    • PUT_FOR_STATE_TRANSFER

      public static final Flag PUT_FOR_STATE_TRANSFER
      Flags the invocation as a put operation done internally by the state transfer. This flag was created purely for internal Infinispan usage, and should not be used by clients calling into Infinispan. Note for internal users: PUT_FOR_STATE_TRANSFER only applies to state transfer-specific actions, in order to avoid loading the previous value one should add the IGNORE_RETURN_VALUES flag explicitly.

    • PUT_FOR_X_SITE_STATE_TRANSFER

      public static final Flag PUT_FOR_X_SITE_STATE_TRANSFER
      Flags the invocation as a put operation done internally by the cross-site state transfer. This flag was created purely for internal Infinispan usage, and should not be used by clients calling into Infinispan.

    • SKIP_SHARED_CACHE_STORE

      public static final Flag SKIP_SHARED_CACHE_STORE
      If this flag is enabled, if a cache store is shared, then storage to the store is skipped.

    • SKIP_OWNERSHIP_CHECK

      public static final Flag SKIP_OWNERSHIP_CHECK
      Ignore current consistent hash and read from data container/commit the change no matter what (if the flag is set).

    • IGNORE_RETURN_VALUES

      public static final Flag IGNORE_RETURN_VALUES
      Signals that a write operation's return value will be ignored, so reading the existing value from a store or from a remote node is not necessary. Typical operations whose return value might be ignored include Map.put(Object, Object) whose return value indicates previous value. So, a user might decide to the put something in the cache but might not be interested in the return value. This flag is ignored for operations that need the existing value to execute correctly, e.g. Map.get(Object), conditional remove (ConcurrentMap.remove(Object, Object)), and replace with an expected value (ConcurrentMap.replace(Object, Object, Object)). That means it is safe to use IGNORE_RETURN_VALUES for all the operations on a cache, unlike SKIP_REMOTE_LOOKUP and SKIP_CACHE_LOAD.

    • SKIP_XSITE_BACKUP

      public static final Flag SKIP_XSITE_BACKUP
      If cross-site replication is enabled, this would skip the replication to any remote site.

    • SKIP_LISTENER_NOTIFICATION

      public static final Flag SKIP_LISTENER_NOTIFICATION
      This flag skips listener notifications as a result of a cache operation. For example, if this flag is passed as a result of a Map.get(Object) call, no callbacks will be made on listeners annotated with CacheEntryVisited.

    • SKIP_STATISTICS

      public static final Flag SKIP_STATISTICS
      This flag skips statistics updates as a result of a cache operation. For example, if this flag is passed as a result of a Map.get(Object) call, no cache hits or cache miss counters will be updated.

    • OPERATION_HOTROD

      @Deprecated(forRemoval=true) public static final Flag OPERATION_HOTROD
      Deprecated, for removal: This API element is subject to removal in a future version.
      Since 10.0, not in use.
      Flag to identify cache operations coming from the Hot Rod server.

    • OPERATION_MEMCACHED

      @Deprecated(forRemoval=true) public static final Flag OPERATION_MEMCACHED
      Deprecated, for removal: This API element is subject to removal in a future version.
      Since 10.0, not in use.
      Flag to identify cache operations coming from the Memcached server.

    • SKIP_INDEX_CLEANUP

      public static final Flag SKIP_INDEX_CLEANUP
      Any time a new indexed entry is inserted, a delete statement is issued on the indexes to remove previous values. This delete statement is executed even if there is no known entry having the same key. Enable this flag when you know for sure there is no existing entry in the index for improved performance. For example, this is useful for speeding up import of new data in an empty cache having an empty index.

    • COMMAND_RETRY

      public static final Flag COMMAND_RETRY
      If a write operation encounters a retry due to a topology change this flag should be used to tell the new owner that such a thing happened. This flag was created purely for internal Infinispan usage, and should not be used by clients calling into Infinispan.

    • ROLLING_UPGRADE

      public static final Flag ROLLING_UPGRADE
      Flag to identity that data is being written as part of a Rolling Upgrade.

    • REMOTE_ITERATION

      @Deprecated(forRemoval=true) public static final Flag REMOTE_ITERATION
      Deprecated, for removal: This API element is subject to removal in a future version.
      Since 14.0, no longer does anything. Will be removed in 17.0.
      Flag to identify that this iteration is done on a remote node and thus no additional wrappings are required

    • SKIP_SIZE_OPTIMIZATION

      public static final Flag SKIP_SIZE_OPTIMIZATION
      Flag that can be used to skip any size optimizations - forcing iteration of entries to count. User shouldn't normally need to use this flag. This is helpful if there are concerns that can cause just a simple size invocation from being consistent (eg. on-going transaction with modifications).

    • IGNORE_TRANSACTION

      public static final Flag IGNORE_TRANSACTION
      Flag that is used by keySet, entrySet and values methods so that they do not return transactional values. Normally an end user would not need to do this.

    • IRAC_UPDATE

      public static final Flag IRAC_UPDATE
      Signals a WriteCommand as an update from a remote site (async).

      Internal use

    • IRAC_STATE

      public static final Flag IRAC_STATE
      Signals a WriteCommand as state transfer from remote site.

      Internal use

    • ALREADY_HAS_LOCK

      public static final Flag ALREADY_HAS_LOCK
      Flag to designate that this operation was performed on behalf of another that already has the lock for the given key.

    • BACKUP_WRITE

      public static final Flag BACKUP_WRITE
      Signals that a WriteCommand was sent from the primary as a backup operation. Some things do not need to be checked in this case.

    • STATE_TRANSFER_PROGRESS

      public static final Flag STATE_TRANSFER_PROGRESS
      Signals that a state transfer is in course. This is primarily used to identify how to load data from cache stores during the state transfer.

  • Method Details

    • values

      public static Flag[] values()
      Returns an array containing the constants of this enum type, in the order they are declared.
      Returns:
      an array containing the constants of this enum type, in the order they are declared

    • valueOf

      public static Flag valueOf(String name)
      Returns the enum constant of this type with the specified name. The string must match exactly an identifier used to declare an enum constant in this type. (Extraneous whitespace characters are not permitted.)
      Parameters:
      name - the name of the enum constant to be returned.
      Returns:
      the enum constant with the specified name
      Throws:
      IllegalArgumentException - if this enum type has no constant with the specified name
      NullPointerException - if the argument is null