See: Description
Class | Description |
---|---|
DefaultFolder |
The POP3 DefaultFolder.
|
POP3Folder |
A POP3 Folder (can only be "INBOX").
|
POP3Message |
A POP3 Message.
|
POP3Provider |
The POP3 protocol provider.
|
POP3SSLProvider |
The POP3 SSL protocol provider.
|
POP3SSLStore |
A POP3 Message Store using SSL.
|
POP3Store |
A POP3 Message Store.
|
The POP3 provider provides a Store object that contains a single Folder named "INBOX". Due to the limitations of the POP3 protocol, many of the JavaMail API capabilities like event notification, folder management, flag management, etc. are not allowed. The corresponding methods throw the MethodNotSupportedException exception; see below for details.
Note that JavaMail does not include a local store into which messages can be downloaded and stored. See our Third Party Products web page for availability of "mbox" and "MH" local store providers.
The POP3 provider is accessed through the JavaMail APIs by using the protocol name "pop3" or a URL of the form "pop3://user:password@host:port/INBOX".
POP3 supports only a single folder named "INBOX".
POP3 supports no permanent flags (see
Folder.getPermanentFlags()
).
In particular, the Flags.Flag.RECENT
flag will never be set
for POP3
messages. It's up to the application to determine which messages in a
POP3 mailbox are "new". There are several strategies to accomplish
this, depending on the needs of the application and the environment:
All approaches will require some permanent storage associated with the client.
POP3 does not support the Folder.expunge()
method. To delete and
expunge messages, set the Flags.Flag.DELETED
flag on the messages
and close the folder using the Folder.close(true)
method. You
cannot expunge without closing the folder.
POP3 does not provide a "received date", so the getReceivedDate
method will return null.
It may be possible to examine other message headers (e.g., the
"Received" headers) to estimate the received date, but these techniques
are error-prone at best.
The POP3 provider supports the POP3 UIDL command, see
POP3Folder.getUID()
.
You can use it as follows:
if (folder instanceof com.sun.mail.pop3.POP3Folder) { com.sun.mail.pop3.POP3Folder pf = (com.sun.mail.pop3.POP3Folder)folder; String uid = pf.getUID(msg); if (uid != null) ... // use it }
You can also pre-fetch all the UIDs for all messages like this:
FetchProfile fp = new FetchProfile(); fp.add(UIDFolder.FetchProfileItem.UID); folder.fetch(folder.getMessages(), fp);
Then use the technique above to get the UID for each message. This is similar to the technique used with the UIDFolder interface supported by IMAP, but note that POP3 UIDs are strings, not integers like IMAP UIDs. See the POP3 spec for details.
When the headers of a POP3 message are accessed, the POP3 provider uses
the TOP command to fetch all headers, which are then cached. Use of the
TOP command can be disabled with the mail.pop3.disabletop
property, in which case the entire message content is fetched with the
RETR command.
When the content of a POP3 message is accessed, the POP3 provider uses
the RETR command to fetch the entire message. Normally the message
content is cached in memory. By setting the
mail.pop3.filecache.enable
property, the message content
will instead be cached in a temporary file. The file will be removed
when the folder is closed. Caching message content in a file is generally
slower, but uses substantially less memory and may be helpful when dealing
with very large messages.
The POP3Message.invalidate
method can be used to invalidate cached data without closing the folder.
Note that if the file cache is being used the data in the file will be
forgotten and fetched from the server if it's needed again, and stored again
in the file cache.
The POP3 CAPA command (defined by RFC 2449) will be used to determine the capabilities supported by the server. Some servers don't implement the CAPA command, and some servers don't return correct information, so various properties are available to disable use of certain POP3 commands, including CAPA.
If the server advertises the PIPELINING capability (defined by
RFC 2449),
or the mail.pop3.pipelining
property is set, the POP3
provider will send some commands in batches, which can significantly
improve performance and memory use.
Some servers that don't support the CAPA command or don't advertise
PIPELINING may still support pipelining; experimentation may be required.
If pipelining is supported and the connection is using SSL, the USER and PASS commands will be sent as a batch. (If SSL is not being used, the PASS command isn't sent until the user is verified to avoid exposing the password if the user name is bad.)
If pipelining is supported, when fetching a message with the RETR command, the LIST command will be sent as well, and the result will be used to size the I/O buffer, greatly reducing memory usage when fetching messages.
Properties
The POP3 protocol provider supports the following properties,
which may be set in the JavaMail Session
object.
The properties are always set as strings; the Type column describes
how the string is interpreted. For example, use
props.put("mail.pop3.port", "888");
to set the mail.pop3.port
property, which is of type int.
Note that if you're using the "pop3s" protocol to access POP3 over SSL, all the properties would be named "mail.pop3s.*".
Name | Type | Description |
---|---|---|
mail.pop3.user | String | Default user name for POP3. |
mail.pop3.host | String | The POP3 server to connect to. |
mail.pop3.port | int | The POP3 server port to connect to, if the connect() method doesn't explicitly specify one. Defaults to 110. |
mail.pop3.connectiontimeout | int | Socket connection timeout value in milliseconds. This timeout is implemented by java.net.Socket. Default is infinite timeout. |
mail.pop3.timeout | int | Socket read timeout value in milliseconds. This timeout is implemented by java.net.Socket. Default is infinite timeout. |
mail.pop3.writetimeout | int | Socket write timeout value in milliseconds. This timeout is implemented by using a java.util.concurrent.ScheduledExecutorService per connection that schedules a thread to close the socket if the timeout expires. Thus, the overhead of using this timeout is one thread per connection. Default is infinite timeout. |
mail.pop3.rsetbeforequit | boolean | Send a POP3 RSET command when closing the folder, before sending the QUIT command. Useful with POP3 servers that implicitly mark all messages that are read as "deleted"; this will prevent such messages from being deleted and expunged unless the client requests so. Default is false. |
mail.pop3.message.class | String |
Class name of a subclass of com.sun.mail.pop3.POP3Message .
The subclass can be used to handle (for example) non-standard
Content-Type headers. The subclass must have a public constructor
of the form MyPOP3Message(Folder f, int msgno)
throws MessagingException .
|
mail.pop3.localaddress | String | Local address (host name) to bind to when creating the POP3 socket. Defaults to the address picked by the Socket class. Should not normally need to be set, but useful with multi-homed hosts where it's important to pick a particular local address to bind to. |
mail.pop3.localport | int | Local port number to bind to when creating the POP3 socket. Defaults to the port number picked by the Socket class. |
mail.pop3.apop.enable | boolean | If set to true, use APOP instead of USER/PASS to login to the POP3 server, if the POP3 server supports APOP. APOP sends a digest of the password rather than the clear text password. Defaults to false. |
mail.pop3.socketFactory | SocketFactory |
If set to a class that implements the
javax.net.SocketFactory interface, this class
will be used to create POP3 sockets. Note that this is an
instance of a class, not a name, and must be set using the
put method, not the setProperty method.
|
mail.pop3.socketFactory.class | String |
If set, specifies the name of a class that implements the
javax.net.SocketFactory interface. This class
will be used to create POP3 sockets.
|
mail.pop3.socketFactory.fallback | boolean |
If set to true, failure to create a socket using the specified
socket factory class will cause the socket to be created using
the java.net.Socket class.
Defaults to true.
|
mail.pop3.socketFactory.port | int | Specifies the port to connect to when using the specified socket factory. If not set, the default port will be used. |
mail.pop3.ssl.enable | boolean | If set to true, use SSL to connect and use the SSL port by default. Defaults to false for the "pop3" protocol and true for the "pop3s" protocol. |
mail.pop3.ssl.checkserveridentity | boolean | If set to true, check the server identity as specified by RFC 2595. These additional checks based on the content of the server's certificate are intended to prevent man-in-the-middle attacks. Defaults to false. |
mail.pop3.ssl.trust | String |
If set, and a socket factory hasn't been specified, enables use of a
MailSSLSocketFactory .
If set to "*", all hosts are trusted.
If set to a whitespace separated list of hosts, those hosts are trusted.
Otherwise, trust depends on the certificate the server presents.
|
mail.pop3.ssl.socketFactory | SSLSocketFactory |
If set to a class that extends the
javax.net.ssl.SSLSocketFactory class, this class
will be used to create POP3 SSL sockets. Note that this is an
instance of a class, not a name, and must be set using the
put method, not the setProperty method.
|
mail.pop3.ssl.socketFactory.class | String |
If set, specifies the name of a class that extends the
javax.net.ssl.SSLSocketFactory class. This class
will be used to create POP3 SSL sockets.
|
mail.pop3.ssl.socketFactory.port | int | Specifies the port to connect to when using the specified socket factory. If not set, the default port will be used. |
mail.pop3.ssl.protocols | string |
Specifies the SSL protocols that will be enabled for SSL connections.
The property value is a whitespace separated list of tokens acceptable
to the javax.net.ssl.SSLSocket.setEnabledProtocols method.
|
mail.pop3.ssl.ciphersuites | string |
Specifies the SSL cipher suites that will be enabled for SSL connections.
The property value is a whitespace separated list of tokens acceptable
to the javax.net.ssl.SSLSocket.setEnabledCipherSuites method.
|
mail.pop3.starttls.enable | boolean |
If true, enables the use of the STLS command (if
supported by the server) to switch the connection to a TLS-protected
connection before issuing any login commands.
If the server does not support STARTTLS, the connection continues without
the use of TLS; see the
mail.pop3.starttls.required
property to fail if STARTTLS isn't supported.
Note that an appropriate trust store must configured so that the client
will trust the server's certificate.
Defaults to false.
|
mail.pop3.starttls.required | boolean |
If true, requires the use of the STLS command.
If the server doesn't support the STLS command, or the command
fails, the connect method will fail.
Defaults to false.
|
mail.pop3.proxy.host | string | Specifies the host name of an HTTP web proxy server that will be used for connections to the mail server. |
mail.pop3.proxy.port | string | Specifies the port number for the HTTP web proxy server. Defaults to port 80. |
mail.pop3.proxy.user | string | Specifies the user name to use to authenticate with the HTTP web proxy server. By default, no authentication is done. |
mail.pop3.proxy.password | string | Specifies the password to use to authenticate with the HTTP web proxy server. By default, no authentication is done. |
mail.pop3.socks.host | string | Specifies the host name of a SOCKS5 proxy server that will be used for connections to the mail server. |
mail.pop3.socks.port | string | Specifies the port number for the SOCKS5 proxy server. This should only need to be used if the proxy server is not using the standard port number of 1080. |
mail.pop3.disabletop | boolean | If set to true, the POP3 TOP command will not be used to fetch message headers. This is useful for POP3 servers that don't properly implement the TOP command, or that provide incorrect information in the TOP command results. Defaults to false. |
mail.pop3.disablecapa | boolean | If set to true, the POP3 CAPA command will not be used to fetch server capabilities. This is useful for POP3 servers that don't properly implement the CAPA command, or that provide incorrect information in the CAPA command results. Defaults to false. |
mail.pop3.forgettopheaders | boolean | If set to true, the headers that might have been retrieved using the POP3 TOP command will be forgotten and replaced by headers retrieved as part of the POP3 RETR command. Some servers, such as some versions of Microsft Exchange and IBM Lotus Notes, will return slightly different headers each time the TOP or RETR command is used. To allow the POP3 provider to properly parse the message content returned from the RETR command, the headers also returned by the RETR command must be used. Setting this property to true will cause these headers to be used, even if they differ from the headers returned previously as a result of using the TOP command. Defaults to false. |
mail.pop3.filecache.enable | boolean | If set to true, the POP3 provider will cache message data in a temporary file rather than in memory. Messages are only added to the cache when accessing the message content. Message headers are always cached in memory (on demand). The file cache is removed when the folder is closed or the JVM terminates. Defaults to false. |
mail.pop3.filecache.dir | String | If the file cache is enabled, this property can be used to override the default directory used by the JDK for temporary files. |
mail.pop3.cachewriteto | boolean |
Controls the behavior of the
writeTo method
on a POP3 message object.
If set to true, and the message content hasn't yet been cached,
and ignoreList is null, the message is cached before being written.
Otherwise, the message is streamed directly
to the output stream without being cached.
Defaults to false.
|
mail.pop3.keepmessagecontent | boolean |
The content of a message is cached when it is first fetched.
Normally this cache uses a SoftReference
to refer to the cached content. This allows the cached content to be purged
if memory is low, in which case the content will be fetched again if it's
needed.
If this property is set to true, a hard reference to the cached content
will be kept, preventing the memory from being reused until the folder
is closed or the cached content is explicitly invalidated (using the
invalidate method).
(This was the behavior in previous versions of JavaMail.)
Defaults to false.
|
mail.pop3.finalizecleanclose | boolean | When the finalizer for POP3Store or POP3Folder is called, should the connection to the server be closed cleanly, as if the application called the close method? Or should the connection to the server be closed without sending any commands to the server? Defaults to false, the connection is not closed cleanly. |
In general, applications should not need to use the classes in this
package directly. Instead, they should use the APIs defined by
javax.mail
package (and subpackages). Applications should
never construct instances of POP3Store
or
POP3Folder
directly. Instead, they should use the
Session
method getStore
to acquire an
appropriate Store
object, and from that acquire
Folder
objects.
In addition to printing debugging output as controlled by the
Session
configuration,
the com.sun.mail.pop3 provider logs the same information using
Logger
as described in the following table:
Logger Name | Logging Level | Purpose |
---|---|---|
com.sun.mail.pop3 | CONFIG | Configuration of the POP3Store |
com.sun.mail.pop3 | FINE | General debugging output |
com.sun.mail.pop3.protocol | FINEST | Complete protocol trace |
WARNING: The APIs unique to this package should be considered EXPERIMENTAL. They may be changed in the future in ways that are incompatible with applications using the current APIs.
Copyright © 2019 JBoss by Red Hat. All rights reserved.