Managing Hosts

Red Hat Satellite 6.9

A guide to managing hosts in a Red Hat Satellite 6 environment.

Red Hat Satellite Documentation Team

Abstract

This guide describes how to configure and work with hosts in a Red Hat Satellite environment. Before continuing with this workflow you must have successfully installed a Red Hat Satellite 6 Server and any required Capsule Servers.

Chapter 1. Overview of Hosts in Red Hat Satellite 6

A host is any Linux client that Red Hat Satellite manages. Hosts can be physical or virtual. Virtual hosts can be deployed on any platform supported by Red Hat Satellite, such as KVM, VMware vSphere, OpenStack, Amazon EC2, Rackspace Cloud Services or Google Compute Engine.

Red Hat Satellite enables host management at scale, including monitoring, provisioning, remote execution, configuration management, software management, and subscription management. You can manage your hosts from the Satellite web UI or from the command line.

In the Satellite web UI, you can browse all hosts recognized by Satellite Server, grouped by type:

  • All Hosts - a list of all hosts recognized by Satellite Server.
  • Discovered Hosts - a list of bare-metal hosts detected on the provisioning network by the Discovery plug-in.
  • Content Hosts - a list of hosts that manage tasks related to content and subscriptions.
  • Host Collections - a list of user-defined collections of hosts used for bulk actions such as errata installation.

To search for a host, type in the Search field, and use an asterisk (*) to perform a partial string search. For example, if searching for a content host named dev-node.example.com, click the Content Hosts page and type dev-node* in the Search field. Alternatively, *node* will also find the content host dev-node.example.com.

Warning

Satellite Server is listed as a host itself even if it is not self-registered. Do not delete Satellite Server from the list of hosts.

Chapter 2. Administering Hosts

This chapter describes creating, registering, administering, and removing hosts.

2.1. Creating a Host in Red Hat Satellite

Use this procedure to create a host in Red Hat Satellite.

Procedure

  1. In the Satellite web UI, click Hosts > Create Host.
  2. On the Host tab, enter the required details.
  3. Click the Ansible Roles tab, and from the Ansible Roles list, select one or more roles that you want to add to the host. Use the arrow icon to manage the roles that you add or remove.
  4. On the Puppet Classes tab, select the Puppet classes you want to include.
  5. On the Interfaces tab:

    1. For each interface, click Edit in the Actions column and configure the following settings as required:

      • Type — For a Bond or BMC interface, use the Type list and select the interface type.
      • MAC address — Enter the MAC address.
      • DNS name — Enter the DNS name that is known to the DNS server. This is used for the host part of the FQDN.
      • Domain — Select the domain name of the provisioning network. This automatically updates the Subnet list with a selection of suitable subnets.
      • IPv4 Subnet — Select an IPv4 subnet for the host from the list.
      • IPv6 Subnet — Select an IPv6 subnet for the host from the list.
      • IPv4 address — If IP address management (IPAM) is enabled for the subnet, the IP address is automatically suggested. Alternatively, you can enter an address. The address can be omitted if provisioning tokens are enabled, if the domain does not mange DNS, if the subnet does not manage reverse DNS, or if the subnet does not manage DHCP reservations.
      • IPv6 address — If IP address management (IPAM) is enabled for the subnet, the IP address is automatically suggested. Alternatively, you can enter an address.
      • Managed — Select this check box to configure the interface during provisioning to use the Capsule provided DHCP and DNS services.
      • Primary — Select this check box to use the DNS name from this interface as the host portion of the FQDN.
      • Provision — Select this check box to use this interface for provisioning. This means TFTP boot will take place using this interface, or in case of image based provisioning, the script to complete the provisioning will be executed through this interface. Note that many provisioning tasks, such as downloading RPMs by anaconda, Puppet setup in a %post script, will use the primary interface.
      • Virtual NIC — Select this check box if this interface is not a physical device. This setting has two options:

        • Tag — Optionally set a VLAN tag. If unset, the tag will be the VLAN ID of the subnet.
        • Attached to — Enter the device name of the interface this virtual interface is attached to.
    2. Click OK to save the interface configuration.
    3. Optionally, click Add Interface to include an additional network interface. See Chapter 4, Adding Network Interfaces for details.
    4. Click Submit to apply the changes and exit.
  6. On the Operating System tab, enter the required details. For Red Hat operating systems, select Synced Content for Media Selection. If you want to use non Red Hat operating systems, select All Media, then select the installation media from the Media Selection list. You can select a partition table from the list or enter a custom partition table in the Custom partition table field. You cannot specify both.
  7. On the Parameters tab, click Add Parameter to add any parameter variables that you want to pass to job templates at run time. This includes all Puppet Class, Ansible playbook parameters and host parameters that you want to associate with the host. To use a parameter variable with an Ansible job template, you must add a Host Parameter.

    When you create a Red Hat Enterprise Linux 8 host, you can set system purpose attributes. System purpose attributes define what subscriptions to attach automatically on host creation. In the Host Parameters area, enter the following parameter names with the corresponding values. For the list of values, see Configuring system purpose in the Performing a standard RHEL installation guide.

    • syspurpose_role
    • syspurpose_sla
    • syspurpose_usage
    • syspurpose_addons
  8. On the Additional Information tab, enter additional information about the host.
  9. Click Submit to complete your provisioning request.

For CLI Users

To create a host associated to a host group, enter the following command:

# hammer host create \
--name "host_name" \
--hostgroup "hostgroup_name" \
--interface="primary=true, \
            provision=true, \
            mac=mac_address, \
            ip=ip_address" \
--organization "Your_Organization" \
--location "Your_Location" \
--ask-root-password yes

This command prompts you to specify the root password. It is required to specify the host’s IP and MAC address. Other properties of the primary network interface can be inherited from the host group or set using the --subnet, and --domain parameters. You can set additional interfaces using the --interface option, which accepts a list of key-value pairs. For the list of available interface settings, enter the hammer host create --help command.

2.2. Editing the System Purpose of a Host

You can edit the system purpose attributes for a Red Hat Enterprise Linux host. System purpose attributes define which subscriptions to attach automatically to this host. For more information about system purpose, see Configuring system purpose in the Performing a standard RHEL installation guide.

Prerequisites

  • The host that you want to edit must be registered with the subscription-manager.

Procedure

  1. In the Satellite web UI, navigate to Hosts > Content Hosts and click the name of the Red Hat Enterprise Linux 8 host that you want to edit.
  2. In the System Purpose area, click the Edit or Remove icon for the system purpose attributes that you want to edit, add, or remove.
  3. Click Save.
  4. Click the Subscriptions tab and select Subscriptions.
  5. Click Run Auto-Attach to attach subscriptions to your host automatically.
  6. Refresh the page to verify that the subscriptions list contains the correct subscriptions.

For CLI Users

  1. Log in to the host and edit the required system purpose attributes. For example, set the usage type to Production, the role to Red Hat Enterprise Linux Server, and add the addon add on. For the list of values, see Configuring system purpose in the Performing a standard RHEL installation guide.

    # syspurpose set-usage Production
    # syspurpose set-role Red Hat Enterprise Linux Server
    # syspurpose add-addons 'your_addon'
  2. Verify the system purpose attributes for this host:

    # syspurpose show
  3. Automatically attach subscriptions to this host:

    # subscription-manager attach --auto
  4. Verify the system purpose status for this host:

    # subscription-manager status

2.3. Editing the System Purpose of Multiple Hosts

You can edit the system purpose attributes of Red Hat Enterprise Linux hosts. System purpose attributes define which subscriptions to attach automatically to hosts. For more information about system purpose, see Configuring system purpose in the Performing a standard RHEL installation guide.

Prerequisites

  • The hosts that you want to edit must be registered with the subscription-manager.

Procedure

  1. In the Satellite web UI, navigate to Hosts > Content Hosts and select Red Hat Enterprise Linux 8 hosts that you want to edit.
  2. Click the Select Action list and select Manage System Purpose.
  3. Select the system purpose attributes that you want to assign to the selected hosts. You can select one of the following values:

    • A specific attribute to set an all selected hosts.
    • No Change to keep the attribute set on the selected hosts.
    • None (Clear) to clear the attribute on the selected hosts.
  4. Click Assign.
  5. Navigate to Hosts > Content Hosts and select the same Red Hat Enterprise Linux 8 hosts to automatically attach subscriptions based on the system purpose.
  6. Click the Select Action list and select Manage Subscriptions.
  7. Click Auto-Attach to attach subscriptions to all selected hosts automatically based on their system role.

2.4. Changing a Module Stream for a Host

If you have a Red Hat Enterprise Linux 8 host, you can modify the module stream for the repositories you install.

After you create the host, you can enable, disable, install, update, and remove module streams from your host in the Satellite web UI.

Procedure

  1. In the Satellite web UI, navigate to Hosts > Content Hosts and click the name of the host that contains the modules you want to change.
  2. Click the Module Streams tab.
  3. From the Available Module Streams list, locate the module that you want to change. You can use the Filter field to refine the list entries. You can also use the Filter Status list to search for modules with a specific status.
  4. From the Actions list, select the change that you want to make to the module.
  5. In the Job Invocation window, ensure that the job information is accurate. Change any details that you require, and then click Submit.

2.5. Creating a Host Group

If you create a high volume of hosts, many of the hosts can have common settings and attributes. Adding these settings and attributes for every new host is time consuming. If you use host groups, you can apply common attributes to hosts that you create.

A host group functions as a template for common host settings, containing many of the same details that you provide to hosts. When you create a host with a host group, the host inherits the defined settings from the host group. You can then provide additional details to individualize the host.

Host Group Hierarchy

You can create a hierarchy of host groups. Aim to have one base level host group that represents all hosts in your organization and provide general settings, and then nested groups to provide specific settings. For example, you can have a base level host group that defines the operating system, and two nested host groups that inherit the base level host group:

  • Hostgroup: Base (Red Hat Enterprise Linux 7.6)

    • Hostgroup: Webserver (applies the httpd Puppet class)

      • Host: webserver1.example.com (web server)
      • Host: webserver2.example.com (web server)
    • Hostgroup: Storage (applies the nfs Puppet class)

      • Host: storage1.example.com (storage server)
      • Host: storage2.example.com (storage server)
    • Host: custom.example.com (custom host)

In this example, all hosts use Red Hat Enterprise Linux 7.6 as their operating system because of their inheritance of the Base host group. The two web server hosts inherit the settings from the Webserver host group, which includes the httpd Puppet class and the settings from the Base host group. The two storage servers inherit the settings from the Storage host group, which includes the nfs Puppet class and the settings from the Base host group. The custom host only inherits the settings from the Base host group.

Procedure

  1. In the Satellite web UI, navigate to Configure > Host Groups and click Create Host Group.
  2. If you have an existing host group that you want to inherit attributes from, you can select a host group from the Parent list. If you do not, leave this field blank.
  3. Enter a Name for the new host group.
  4. Enter any further information that you want future hosts to inherit.
  5. Click the Ansible Roles tab, and from the Ansible Roles list, select one or more roles that you want to add to the host. Use the arrow icon to manage the roles that you add or remove.
  6. Click the additional tabs and add any details that you want to attribute to the host group.

    Note

    Puppet fails to retrieve the Puppet CA certificate while registering a host with a host group associated with a Puppet environment created inside a Production environment.

    To create a suitable Puppet environment to be associated with a host group, manually create a directory and change the owner:

    # mkdir /etc/puppetlabs/code/environments/example_environment
    # chown apache /etc/puppetlabs/code/environments/example_environment
  7. Click Submit to save the host group.

For CLI Users

Create the host group with the hammer hostgroup create command. For example:

# hammer hostgroup create --name "Base" \
--lifecycle-environment "Production" --content-view "Base" \
--puppet-environment "production" --content-source-id 1 \
--puppet-ca-proxy-id 1 --puppet-proxy-id 1 --domain "example.com" \
--subnet `ACME's Internal Network` --architecture "x86_64" \
--operatingsystem "RedHat 7.2" --medium-id 9 \
--partition-table "Kickstart default" --root-pass "p@55w0rd!" \
--locations "New York" --organizations "ACME"

2.6. Creating a Host Group for Each LifeCycle Environment

Use this procedure to create a host group for the Library lifecycle environment and add nested host groups for other lifecycle environments.

Procedure

To create a host group for each life cycle environment, run the following Bash script:

MAJOR="7"
ARCH="x86_64"
ORG="Your Organization"
LOCATIONS="Your Location"
PTABLE_NAME="Kickstart default"
DOMAIN="example.com"

hammer --output csv --no-headers lifecycle-environment list --organization "${ORG}" | cut -d ',' -f 2 | while read LC_ENV; do
  [[ ${LC_ENV} == "Library" ]] && continue

  hammer hostgroup create --name "rhel-${MAJOR}server-${ARCH}-${LC_ENV}" \
    --architecture "${ARCH}" \
    --partition-table "${PTABLE_NAME}" \
    --domain "${DOMAIN}" \
    --organizations "${ORG}" \
    --query-organization "${ORG}" \
    --locations "${LOCATIONS}" \
    --lifecycle-environment "${LC_ENV}"
done

2.7. Changing the Group of a Host

Use this procedure to change the group of a host.

Procedure

  1. In the Satellite web UI, navigate to Hosts > All hosts.
  2. Select the check box of the host you want to change.
  3. From the Select Action list, select Change Group. A new option window opens.
  4. From the Host Group list, select the group that you want for your host.
  5. Click Submit.

2.8. Changing the Environment of a Host

Use this procedure to change the environment of a host.

Procedure

  1. In the Satellite web UI, navigate to Hosts > All hosts.
  2. Select the check box of the host you want to change.
  3. From the Select Action list, select Change Environment. A new option window opens.
  4. From the Environment list, select the new environment for your host.
  5. Click Submit.

2.9. Changing the Managed Status of a Host

Hosts provisioned by Satellite are Managed by default. When a host is set to Managed, you can configure additional host parameters from Satellite Server. These additional parameters are listed on the Operating System tab. If you change any settings on the Operating System tab, they will not take effect until you set the host to build and reboot it.

If you need to obtain reports about configuration management on systems using an operating system not supported by Satellite, set the host to Unmanaged.

Use this procedure to switch a host between Managed and Unmanaged status.

Procedure

  1. In the Satellite web UI, navigate to Hosts > All hosts.
  2. Select the host.
  3. Click Edit.
  4. Click Manage host or Unmanage host to change the host’s status.
  5. Click Submit.

2.10. Assigning a Host to a Specific Organization

Use this procedure to assign a host to a specific organization. For general information about organizations and how to configure them, see Managing Organizations in the Content Management Guide.

Procedure

  1. In the Satellite web UI, navigate to Hosts > All hosts.
  2. Select the check box of the host you want to change.
  3. From the Select Action list, select Assign Organization. A new option window opens.
  4. From the Select Organization list, select the organization that you want to assign your host to. Select the check box Fix Organization on Mismatch.

    Note

    A mismatch happens if there is a resource associated with a host, such as a domain or subnet, and at the same time not associated with the organization you want to assign the host to. The option Fix Organization on Mismatch will add such a resource to the organization, and is therefore the recommended choice. The option Fail on Mismatch will always result in an error message. For example, reassigning a host from one organization to another will fail, even if there is no actual mismatch in settings.

  5. Click Submit.

2.11. Assigning a Host to a Specific Location

Use this procedure to assign a host to a specific location. For general information about locations and how to configure them, see Creating a Location in the Content Management Guide.

Procedure

  1. In the Satellite web UI, navigate to Hosts > All hosts.
  2. Select the check box of the host you want to change.
  3. From the Select Action list, select Assign Location. A new option window opens.
  4. Navigate to the Select Location list and choose the location that you want for your host. Select the check box Fix Location on Mismatch.

    Note

    A mismatch happens if there is a resource associated with a host, such as a domain or subnet, and at the same time not associated with the location you want to assign the host to. The option Fix Location on Mismatch will add such a resource to the location, and is therefore the recommended choice. The option Fail on Mismatch will always result in an error message. For example, reassigning a host from one location to another will fail, even if there is no actual mismatch in settings.

  5. Click Submit.

2.12. Removing a Host from Red Hat Satellite

Use this procedure to remove a host from Red Hat Satellite.

Procedure

  1. In the Satellite web UI, navigate to Hosts > All hosts or Hosts > Content Hosts. Note that there is no difference from what page you remove a host, from All hosts or Content Hosts. In both cases, Satellite removes a host completely.
  2. Select the hosts that you want to remove.
  3. From the Select Action list, select Delete Hosts.
  4. Click Submit to remove the host from Red Hat Satellite permanently.
Warning

By default, the Destroy associated VM on host delete setting is set to no. If a host record that is associated with a virtual machine is deleted, the virtual machine will remain on the compute resource.

To delete a virtual machine on the compute resource, navigate to Administer > Settings and select the Provisioning tab. Setting Destroy associated VM on host delete to yes deletes the virtual machine if the host record that is associated with the virtual machine is deleted. To avoid deleting the virtual machine in this situation, disassociate the virtual machine from Satellite without removing it from the compute resource or change the setting.

Disassociating A Virtual Machine from Satellite without Removing it from a Hypervisor

  1. In the Satellite web UI, navigate to Hosts > All Hosts and select the check box to the left of the hosts to be disassociated.
  2. From the Select Action list, select the Disassociate Hosts button.
  3. Optionally, select the check box to keep the hosts for future action.
  4. Click Submit.

Chapter 3. Registering Hosts

There are three main methods for registering hosts to Satellite Server or Capsule Server:

  1. Generate a curl command from Satellite and run this command from unlimited number of hosts to register them using the global registration template. This method is suited for both freshly installed hosts and hosts that have been previously registered, for example, to Satellite 5 or another Satellite 6.

    By using this method you can also deploy Satellite SSH keys to hosts during registration to Satellite to enable hosts for remote execution jobs. For more information about the remote execution jobs, see Configuring and Setting up Remote Jobs.

    By using this method you can also configure hosts with Red Hat Insights during registration to Satellite. For more information about using Insights with Satellite hosts, see Monitoring Hosts Using Red Hat Insights.

  2. Download and install the consumer RPM server.example.com/pub/katello-ca-consumer-latest.noarch.rpm and then run Subscription Manager. This method is suited for freshly installed hosts.
  3. Download and run the bootstrap script (server.example.com/pub/bootstrap.py). This method is suited for both freshly installed hosts and hosts that have been previously registered, for example, to Satellite 5 or another Satellite 6.

You can also register Atomic Hosts to Satellite Server or Capsule Server.

Use one of the following procedures to register a host:

Use the following procedures to install and configure host tools:

Supported Host Operating Systems

Hosts must use one of the following Red Hat Enterprise Linux versions:

  • 5.7 or later
  • 6.1 or later*
  • 7.0 or later
  • 8.0 or later
Note

Red Hat Enterprise Linux versions 6.1, 6.2, and 6.3 require subscription-manager and related packages to be updated manually. For more information, see https://access.redhat.com/solutions/1256763.

Supported Architectures

All architectures of Red Hat Enterprise Linux are supported:

  • i386
  • x86_64
  • s390x
  • ppc_64

3.1. Registering a Host to Red Hat Satellite Using the Global Registration Template

Use the following procedure to register a host to Red Hat Satellite 6.

With this registration method you can register hosts to Satellite by generating a curl command on Satellite and running this command on hosts. This method uses the global registration template that gives you complete control over the process of the host registration.

Prerequisites

  • The Satellite user that generates the curl command must have the create_hosts permission.
  • You must have root privileges on the host that you want to register.
  • You must have an activation key created.
  • Optional: If you want to register hosts to Red Hat Insights, you must synchronize the rhel-7-server-rpms repository and make it available in the activation key that you use. This is required to install the insights-client package on hosts.

Procedure

  1. In the Satellite web UI, navigate to Hosts > Provisioning Templates, find the Linux registration default template and click it.
  2. Click the Association tab.
  3. Ensure that the operating system that you want to register is in the Selected items column.
  4. Click Submit.
  5. Navigate to Hosts > Operating Systems and click the operating system that you want to register.
  6. Click the Templates tab.
  7. From the Registration template list, ensure that Linux registration default is selected.
  8. Click Submit.
  9. Navigate to Hosts > All Hosts > Register Host.
  10. Optional: If you want to register hosts through Capsule, ensure that the Registration feature is enabled on this Capsule.

    Navigate to Infrastructure > Capsules, click the Capsule that you want to use, and locate the Registration feature in the Active features list.

    Optional: If the Registration feature is not enabled on your Capsule, enter the following command on the Capsule to enable it:

    # satellite-installer --foreman-proxy-registration \
    --foreman-proxy-templates \
    --foreman-proxy-template-url 'http://capsule.example.com'
  11. Optional: From the Host Group list, select the host group to associate the hosts with.
  12. From the Operating System list, select the operating system of hosts that you want to register.
  13. From the Capsule list, select the Capsule to register hosts through. You must select the internal Capsule if you do not want to use an external Capsule.
  14. From the Insights list, select whether you want to register the hosts to Insights or not.
  15. From the Remote Execution list, select whether you want to deploy Satellite SSH keys to hosts or not.
  16. Optional: Satellite uses the JSON Web Tokens (JWT) for authentication. The duration of this token defines how long the generated curl command works. If you want to change the duration of the token, enter the required duration to the Token lifetime (hours) field. You can set the duration to any number of hours.

    Note that Satellite uses the permissions of the user who generates the curl command for authorization of hosts. If the user loses or gains additional permissions, the permissions of the JWT change too. Therefore, do not delete, block, or change permissions of the user during the token duration.

  17. Optional: In the Remote Execution Interface field, enter a network interface that hosts must use for the SSH connection. If you keep this field blank, Satellite uses the default network interface.
  18. In the Activation Key(s) field, enter one or more activation keys to assign to hosts.
  19. Click Generate command.
  20. Copy the generated curl command to enter it on the hosts.
  21. Configure hosts with the CA certificate with one of the following methods:

    • Add the --insecure option to the curl command. This makes the first call insecure, however, during this first call, hosts download the CA file from Satellite. Hosts will use this CA file to connect to Satellite with all future calls making them secure.

      If an attacker, located in the network between Satellite and a host, fetches the CA file from the first insecure call, the attacker will be able to access the content of the API calls to and from the registered host and the JWT. Therefore, if you have chosen to deploy SSH keys during registration, the attacker will be able to access the host using the SSH key. The following is an example of the curl command with the --insecure option:

      curl -X GET --insecure https://satellite.example.com/register...
    • If you do not want to call the curl command with the --insecure option, you can manually copy and install the CA file on each host.

      To do this find where Satellite stores the CA file by navigating to Administer > Settings > Authentication and locating the value for the SSL CA file setting.

      Copy the CA file to the /etc/pki/ca-trust/source/anchors/ directory on hosts and enter the following commands:

      # update-ca-trust enable
      # update-ca-trust
  22. On the hosts that you want to register, enter the curl command as root.

3.1.1. Customizing the Global Registration and Host Registration Templates

Use information in this section if you want to customize the registration process.

Note that all default templates in Satellite are locked. If you want to customize the registration process, you need to clone the default templates and edit the clones. Then, change the Default Global registration template setting in Administer > Settings > Provisioning to point to your custom Global Registration template. Change the Registration template setting in the operating system settings to point to your custom Linux registration default template.

Templates

The registration process uses the following registration templates:

  • The Global Registration template contains steps for registering hosts to Satellite. This template renders when hosts access the /register endpoint.
  • The Linux registration default template contains steps for configuring hosts after they are registered.

Global Parameters

You can configure the following global parameters by navigating to Configure > Global Parameters:

  • The host_registration_remote_execution parameter is used in the remote_execution_ssh_keys snippet, the default value is true.
  • The host_registration_insights parameter is used in the insights snippet, the default value is true.

Snippets

The remote_execution_ssh_keys snippet is used in the Linux registration default template. It deploys SSH keys to the host only when the host_registration_remote_execution parameter is true.

The insights snippet is used in the Linux registration default template. It downloads and installs the Red Hat Insights client when global parameter host_registration_insights is set to true.

Variables

This table describes what variables are used in the Global Registration template.

Table 3.1. The Global Registration Template Variables

VariableCommand argumentDescription

@user

none

Current authenticated user object.

@organization

organization_id

If organization_id is not set, then user’s default organization is set, or the first organization from user’s organizations list.

@location

location_id

If location_id is not set, user’s default location is set, or the first location from user’s locations list.

@hostgroup

hostgroup_id

Host group of the host.

@operatingsystem

operatingsystem_id

Host operating system.

@setup_insights

setup_insights

Override the value of the host_registration_insights global parameter for the registered host and install insights client.

@setup_remote_execution

setup_remote_execution

Override the value of host_registration_remote_execution global parameter for the registered host and deploy SSH keys for remote execution.

@remote_execution_interface

remote_execution_interface

Set default interface of host for the remote execution.

@activation_key

activation_key

Host activation keys.

@registration_url

none

URL for the /register endpoint.

3.2. Registering a Host to Red Hat Satellite Manually

Use the following procedure to manually register a host to Red Hat Satellite 6.

Prerequisites

  • Satellite Server, any Capsule Servers, and all hosts must be synchronized with the same NTP server, and have a time synchronization tool enabled and running.
  • The daemon rhsmcertd must be running on the hosts.
  • An activation key must be available for the host. For more information, see Managing Activation Keys in the Content Management Guide.
  • Subscription Manager must be version 1.10 or later. The package is available in the standard Red Hat Enterprise Linux repository.

Procedure

Red Hat Enterprise Linux hosts register to the Red Hat Content Delivery Network by default.

Update each host configuration so that they receive updates from the correct Satellite Server or Capsule Server:

  1. Note the fully qualified domain name (FQDN) of the Satellite Server or Capsule Server, for example server.example.com.
  2. Log in to the host as the root user and download the katello-ca-consumer-latest.noarch.rpm package from Satellite Server or Capsule Server to which the host is to be registered. The consumer RPM configures the host to download content from the content source that is specified in Red Hat Satellite.

    # curl --insecure --output katello-ca-consumer-latest.noarch.rpm https://satellite.example.com/pub/katello-ca-consumer-latest.noarch.rpm
  3. Install the katello-ca-consumer-latest.noarch.rpm package:

    # yum localinstall katello-ca-consumer-latest.noarch.rpm
    Note

    The RPM package is not signed. If required, you can add the --nosignature option to install the package. The katello-ca-consumer-hostname-1.0-1.noarch.rpm package is an additional katello-ca-consumer RPM that contains the server’s host name. The katello-ca-consumer-latest.noarch.rpm package always reflects the most recent version. Both serve the same purpose.

  4. Clear any old host data related to Red Hat Subscription Manager (RHSM):

    # subscription-manager clean
  5. Register the host using RHSM:

    # subscription-manager register --org=your_org_name \
    --activationkey=your_activation_key

    Example 3.1. Command Output after Registration:

    # subscription-manager register --org=MyOrg --activationkey=TestKey-1
    The system has been registered with id: 62edc0f8-855b-4184-b1b8-72a9dc793b96
Note

You can use the --environment option to override the Content View and life cycle environment defined by the activation key. For example, to register a host to the Content View "MyView" in a "Development" life cycle environment:

 # subscription-manager register --org=your_org_name \
 --environment=Development/MyView \
 --activationkey=your_activation_key
Note

For Red Hat Enterprise Linux 6.3 hosts, the release version defaults to Red Hat Enterprise Linux 6 Server and needs to be pointed to the 6.3 repository:

  1. In the Satellite web UI, navigate to Hosts > Content Hosts.
  2. Select the check box next to the host that needs to be changed.
  3. From the Select Action list, select Set Release Version.
  4. From the Release Version list, select 6.3.
  5. Click Done.

3.3. Registering an Atomic Host to Red Hat Satellite

Use the following procedure to register an Atomic Host to Red Hat Satellite 6.

Procedure

  1. Log in to the Atomic Host as the root user.
  2. Retrieve katello-rhsm-consumer from Satellite Server:

    # wget http://satellite.example.com/pub/katello-rhsm-consumer
  3. Change the mode of katello-rhsm-consumer to make it executable:

    # chmod +x katello-rhsm-consumer
  4. Run katello-rhsm-consumer:

    # ./katello-rhsm-consumer

    Register with Red Hat Subscription Manager:

    # subscription-manager register
Note

The Katello agent is not supported on Atomic Hosts.

3.4. Registering a Host to Red Hat Satellite Using The Bootstrap Script

Use the bootstrap script to automate content registration and Puppet configuration. You can use the bootstrap script to register new hosts, or to migrate existing hosts to Red Hat Satellite 6 from Satellite 5, RHN, SAM, or RHSM.

The katello-client-bootstrap package is installed by default on Satellite Server’s base operating system. The bootstrap.py script is installed in the /var/www/html/pub/ directory to make it available to hosts at satellite.example.com/pub/bootstrap.py. The script includes documentation in the /usr/share/doc/katello-client-bootstrap-version/README.md file.

To use the bootstrap script, you must install it on the host. As the script is only required once, and only for the root user, you can place it in /root or /usr/local/sbin and remove it after use. This procedure uses /root.

Prerequisites

  • You have a Satellite user with the permissions required to run the bootstrap script. The examples in this procedure specify the admin user. If this is not acceptable to your security policy, create a new role with the minimum permissions required and add it to the user that will run the script. For more information, see Section 3.4.1, “Setting Permissions for the Bootstrap Script”.
  • You have an activation key for your hosts with the Satellite Tools 6.9 repository enabled. For information on configuring activation keys, see Managing Activation Keys in the Content Management Guide.
  • You have created a host group. For more information about creating host groups, see Section 2.5, “Creating a Host Group”.

Puppet Considerations

If a host group is associated with a Puppet environment created inside a Production environment, Puppet fails to retrieve the Puppet CA certificate while registering a host from that host group.

To create a suitable Puppet environment to be associated with a host group, follow these steps:

  1. Manually create a directory and change the owner:

    # mkdir /etc/puppetlabs/code/environments/example_environment
    # chown apache /etc/puppetlabs/code/environments/example_environment
  2. Navigate to Configure > Environments and click Import environment from. The button name includes the FQDN of the internal or external Capsule.
  3. Choose the created directory and click Update.

Procedure

  1. Log in to the host as the root user.
  2. Download the script:

    # curl -O http://satellite.example.com/pub/bootstrap.py
  3. Make the script executable:

    # chmod +x bootstrap.py
  4. Confirm that the script is executable by viewing the help text:

    • On Red Hat Enterprise Linux 8:

      # /usr/libexec/platform-python bootstrap.py -h
    • On other Red Hat Enterprise Linux versions:

      # ./bootstrap.py -h
  5. Enter the bootstrap command with values suitable for your environment.

    For the --server option, specify the FQDN of Satellite Server or a Capsule Server. For the --location, --organization, and --hostgroup options, use quoted names, not labels, as arguments to the options. See Section 3.4.2, “Advanced Bootstrap Script Configuration” for advanced use cases.

    • On Red Hat Enterprise Linux 8, enter the following command:

      # /usr/libexec/platform-python bootstrap.py \
      --login=admin \
      --server satellite.example.com \
      --location="Example Location" \
      --organization="Example Organization" \
      --hostgroup="Example Host Group" \
      --activationkey=activation_key
    • On Red Hat Enterprise Linux 5, 6, or 7, enter the following command:

      # ./bootstrap.py --login=admin \
      --server satellite.example.com \
      --location="Example Location" \
      --organization="Example Organization" \
      --hostgroup="Example Host Group" \
      --activationkey=activation_key
  6. Enter the password of the Satellite user you specified with the --login option.

    The script sends notices of progress to stdout.

  7. When prompted by the script, approve the host’s Puppet certificate. In the Satellite web UI, navigate to Infrastructure > Capsules and find the Satellite or Capsule Server you specified with the --server option.
  8. From the list in the Actions column, select Certificates.
  9. In the Actions column, click Sign to approve the host’s Puppet certificate.
  10. Return to the host to see the remainder of the bootstrap process completing.
  11. In the Satellite web UI, navigate to Hosts > All hosts and ensure that the host is connected to the correct host group.
  12. Optional: After the host registration is complete, remove the script:

    # rm bootstrap.py

3.4.1. Setting Permissions for the Bootstrap Script

Use this procedure to configure a Satellite user with the permissions required to run the bootstrap script.

Procedure

  1. In the Satellite web UI, navigate to Administer > Users.
  2. Select an existing user by clicking the required Username. A new pane opens with tabs to modify information about the selected user. Alternatively, create a new user specifically for the purpose of running this script.
  3. Click the Roles tab.
  4. Select Edit hosts and Viewer from the Roles list.

    Important

    The Edit hosts role allows the user to edit and delete hosts as well as being able to add hosts. If this is not acceptable to your security policy, create a new role with the following permissions and assign it to the user:

    • view_organizations
    • view_locations
    • view_domains
    • view_hostgroups
    • view_hosts
    • view_architectures
    • view_ptables
    • view_operatingsystems
    • create_hosts
  5. Click Submit.

For CLI Users

  1. Create a role with the minimum permissions required by the bootstrap script. This example creates a role with the name Bootstrap:

    # ROLE='Bootstrap'
    hammer role create --name "$ROLE"
    hammer filter create --role "$ROLE" --permissions view_organizations
    hammer filter create --role "$ROLE" --permissions view_locations
    hammer filter create --role "$ROLE" --permissions view_domains
    hammer filter create --role "$ROLE" --permissions view_hostgroups
    hammer filter create --role "$ROLE" --permissions view_hosts
    hammer filter create --role "$ROLE" --permissions view_architectures
    hammer filter create --role "$ROLE" --permissions view_ptables
    hammer filter create --role "$ROLE" --permissions view_operatingsystems
    hammer filter create --role "$ROLE" --permissions create_hosts
  2. Assign the new role to an existing user:

    # hammer user add-role --id user_id --role Bootstrap

    Alternatively, you can create a new user and assign this new role to them. For more information on creating users with Hammer, see Managing Users and Roles in the Administering Red Hat Satellite guide.

3.4.2. Advanced Bootstrap Script Configuration

This section has more examples for using the bootstrap script to register or migrate a host.

Warning

These examples specify the admin Satellite user. If this is not acceptable to your security policy, create a new role with the minimum permissions required by the bootstrap script. For more information, see Section 3.4.1, “Setting Permissions for the Bootstrap Script”.

Migrating a host from one Satellite 6 to another Satellite 6

Use the script with --force to remove the katello-ca-consumer-* packages from the old Satellite and install the katello-ca-consumer-* packages on the new Satellite.

  • On Red Hat Enterprise Linux 8, enter the following command:

    # /usr/libexec/platform-python bootstrap.py \
    --login=admin \
    --server satellite.example.com \
    --location="Example Location" \
    --organization="Example Organization" \
    --hostgroup="Example Host Group" \
    --activationkey=activation_key \
    --force
  • On Red Hat Enterprise Linux 5, 6, or 7, enter the following command:

    # bootstrap.py --login=admin \
    --server satellite.example.com \
    --location="Example Location" \
    --organization="Example Organization" \
    --hostgroup="Example Host Group" \
    --activationkey=activation_key \
    --force

Migrating a host from Red Hat Network (RHN) or Satellite 5 to Satellite 6

The bootstrap script detects the presence of /etc/syconfig/rhn/systemid and a valid connection to RHN as an indicator that the system is registered to a legacy platform. The script then calls rhn-classic-migrate-to-rhsm to migrate the system from RHN. By default, the script does not delete the system’s legacy profile due to auditing reasons. To remove the legacy profile, use --legacy-purge, and use --legacy-login to supply a user account that has appropriate permissions to remove a profile. Enter the user account password when prompted.

  • On Red Hat Enterprise Linux 8, enter the following command:

    # /usr/libexec/platform-python bootstrap.py \
    --login=admin \
    --server satellite.example.com \
    --location="Example Location" \
    --organization="Example Organization" \
    --hostgroup="Example Host Group" \
    --activationkey=activation_key \
    --legacy-purge \
    --legacy-login rhn-user
  • On Red Hat Enterprise Linux 5, 6, or 7, enter the following command:

    # bootstrap.py --login=admin \
    --server satellite.example.com \
    --location="Example Location" \
    --organization="Example Organization" \
    --hostgroup="Example Host Group" \
    --activationkey=activation_key \
    --legacy-purge \
    --legacy-login rhn-user

Registering a host to Satellite 6, omitting Puppet setup

By default, the bootstrap script configures the host for content management and configuration management. If you have an existing configuration management system and do not want to install Puppet on the host, use --skip-puppet.

  • On Red Hat Enterprise Linux 8, enter the following command:

    # /usr/libexec/platform-python bootstrap.py \
    --login=admin \
    --server satellite.example.com \
    --location="Example Location" \
    --organization="Example Organization" \
    --hostgroup="Example Host Group" \
    --activationkey=activation_key \
    --skip-puppet
  • On Red Hat Enterprise Linux 5, 6, or 7, enter the following command:

    # bootstrap.py --login=admin \
    --server satellite.example.com \
    --location="Example Location" \
    --organization="Example Organization" \
    --hostgroup="Example Host Group" \
    --activationkey=activation_key \
    --skip-puppet

Registering a host to Satellite 6 for content management only

To register a system as a content host, and omit the provisioning and configuration management functions, use --skip-foreman.

  • On Red Hat Enterprise Linux 8, enter the following command:

    # /usr/libexec/platform-python bootstrap.py \
    --server satellite.example.com \
    --organization="Example Organization" \
    --activationkey=activation_key \
    --skip-foreman
  • On Red Hat Enterprise Linux 5, 6, or 7, enter the following command:

    # bootstrap.py --server satellite.example.com \
    --organization="Example Organization" \
    --activationkey=activation_key \
    --skip-foreman

Changing the method the bootstrap script uses to download the consumer RPM

By default, the bootstrap script uses HTTP to download the consumer RPM (server.example.com/pub/katello-ca-consumer-latest.noarch.rpm). In some environments, you might want to allow HTTPS only between the host and Satellite. Use --download-method to change the download method from HTTP to HTTPS.

  • On Red Hat Enterprise Linux 8, enter the following command:

    # /usr/libexec/platform-python bootstrap.py \
    --login=admin \
    --server satellite.example.com \
    --location="Example Location" \
    --organization="Example Organization" \
    --hostgroup="Example Host Group" \
    --activationkey=activation_key \
    --download-method https
  • On Red Hat Enterprise Linux 5, 6, or 7, enter the following command:

    # bootstrap.py --login=admin \
    --server satellite.example.com \
    --location="Example Location" \
    --organization="Example Organization" \
    --hostgroup="Example Host Group" \
    --activationkey=activation_key \
    --download-method https

Providing the host’s IP address to Satellite

On hosts with multiple interfaces or multiple IP addresses on one interface, you might need to override the auto-detection of the IP address and provide a specific IP address to Satellite. Use --ip.

  • On Red Hat Enterprise Linux 8, enter the following command:

    # /usr/libexec/platform-python bootstrap.py \
    --login=admin \
    --server satellite.example.com \
    --location="Example Location" \
    --organization="Example Organization" \
    --hostgroup="Example Host Group" \
    --activationkey=activation_key \
    --ip 192.x.x.x
  • On Red Hat Enterprise Linux 5, 6, or 7, enter the following command:

    # bootstrap.py --login=admin \
    --server satellite.example.com \
    --location="Example Location" \
    --organization="Example Organization" \
    --hostgroup="Example Host Group" \
    --activationkey=activation_key \
    --ip 192.x.x.x

Enabling remote execution on the host

Use --rex and --rex-user to enable remote execution and add the required SSH keys for the specified user.

  • On Red Hat Enterprise Linux 8, enter the following command:

    # /usr/libexec/platform-python bootstrap.py \
    --login=admin \
    --server satellite.example.com \
    --location="Example Location" \
    --organization="Example Organization" \
    --hostgroup="Example Host Group" \
    --activationkey=activation_key \
    --rex \
    --rex-user root
  • On Red Hat Enterprise Linux 5, 6, or 7, enter the following command:

    # bootstrap.py --login=admin \
    --server satellite.example.com \
    --location="Example Location" \
    --organization="Example Organization" \
    --hostgroup="Example Host Group" \
    --activationkey=activation_key \
    --rex \
    --rex-user root

Creating a domain for a host during registration

To create a host record, the DNS domain of a host needs to exist in Satellite prior to running the script. If the domain does not exist, add it using --add-domain.

  • On Red Hat Enterprise Linux 8, enter the following command:

    # /usr/libexec/platform-python bootstrap.py \
    --login=admin \
    --server satellite.example.com \
    --location="Example Location" \
    --organization="Example Organization" \
    --hostgroup="Example Host Group" \
    --activationkey=activation_key \
    --add-domain
  • On Red Hat Enterprise Linux 5, 6, or 7, enter the following command:

    # bootstrap.py --login=admin \
    --server satellite.example.com \
    --location="Example Location" \
    --organization="Example Organization" \
    --hostgroup="Example Host Group" \
    --activationkey=activation_key \
    --add-domain

Providing an alternative FQDN for the host

If the host’s host name is not an FQDN, or is not RFC-compliant (containing a character such as an underscore), the script will fail at the host name validation stage. If you cannot update the host to use an FQDN that is accepted by Satellite, you can use the bootstrap script to specify an alternative FQDN.

  1. Set create_new_host_when_facts_are_uploaded and create_new_host_when_report_is_uploaded to false using Hammer:

    # hammer settings set \
    --name  create_new_host_when_facts_are_uploaded \
    --value false
    # hammer settings set \
    --name  create_new_host_when_report_is_uploaded \
    --value false
  2. Use --fqdn to specify the FQDN that will be reported to Satellite:

    • On Red Hat Enterprise Linux 8, enter the following command:

      # /usr/libexec/platform-python bootstrap.py --login=admin \
      --server satellite.example.com \
      --location="Example Location" \
      --organization="Example Organization" \
      --hostgroup="Example Host Group" \
      --activationkey=activation_key \
      --fqdn node100.example.com
    • On Red Hat Enterprise Linux 5, 6, or 7, enter the following command:

      # bootstrap.py --login=admin \
      --server satellite.example.com \
      --location="Example Location" \
      --organization="Example Organization" \
      --hostgroup="Example Host Group" \
      --activationkey=activation_key \
      --fqdn node100.example.com

3.5. Installing the Katello Agent

You can install the Katello agent to remotely update Satellite clients.

Note

The Katello agent is deprecated and will be removed in a future Satellite version. Migrate your processes to use the remote execution feature to update clients remotely. For more information, see Host Management Without Goferd and Katello Agent in the Managing Hosts Guide.

The katello-agent package depends on the gofer package that provides the goferd service. This service must be enabled so that Satellite Server or Capsule Server can provide information about errata that are applicable for content hosts.

Prerequisites

Before installing the Katello agent, ensure the following conditions are met:

  • You have enabled the Satellite Tools 6.9 repository on Satellite Server. For more information, see Enabling the Satellite Tools 6.9 Repository in Installing Satellite Server from a Connected Network.
  • You have synchronized the Satellite Tools 6.9 repository on Satellite Server. For more information, see Synchronizing the Satellite Tools 6.9 Repository in Installing Satellite Server from a Connected Network.
  • You have enabled the Satellite Tools 6.9 repository on the client.

Procedure

To install the Katello agent, complete the following steps:

  1. Install the katello-agent package:

    # yum install katello-agent
  2. Start the goferd service :

    # systemctl start goferd

3.6. Installing Tracer

Use this procedure to install Tracer on Red Hat Satellite 6.9, and access Traces. Tracer displays a list of services and applications that are outdated and need to be restarted. Traces is the output generated by Tracer in the Satellite web UI.

Prerequisites

  • The host must be registered to Red Hat Satellite.
  • The Red Hat Satellite Tools 6.9 repository must be enabled and synchronized on Satellite Server, and enabled on the host.

Procedure

  1. On the content host, install the katello-host-tools-tracer RPM package:

    # yum install katello-host-tools-tracer
  2. Enter the following command:

    # katello-tracer-upload
  3. In the Satellite web UI, navigate to Hosts > All hosts, then click the required host name.
  4. In the Properties tab, examine the Properties table and find the Traces item. If you cannot find a Traces item in the Properties table, then Tracer is not installed.
  5. Navigate to Hosts > Content Hosts, then click the required host name.
  6. Click the Traces tab to view Traces.

3.7. Installing and Configuring the Puppet Agent

Use this procedure to install and configure the Puppet agent on a host. For more information about Puppet, see the Puppet Guide.

Prerequisites

  • The host must be registered to Red Hat Satellite.
  • The host must have a Puppet environment assigned to it.
  • The Red Hat Satellite Tools 6.9 repository must be enabled and synchronized on Satellite Server, and enabled on the host.

Procedure

  1. Log in to the host as the root user.
  2. Install the Puppet agent package:

    # yum install puppet-agent
  3. Configure the Puppet agent to start on boot:

    • On Red Hat Enterprise Linux 6:

      # chkconfig puppet on
    • On Red Hat Enterprise Linux 7:

      # systemctl enable puppet
  4. Append the following server and environment settings to the /etc/puppetlabs/puppet/puppet.conf file. Set the environment parameter to the name of the Puppet environment to which the host belongs:

    environment = My_Example_Org_Library
    server = satellite.example.com
    ca_server = satellite.example.com
  5. Run the Puppet agent on the host:

    # puppet agent -t
  6. In the Satellite web UI, navigate to Infrastructure > Capsules.
  7. From the list in the Actions column for the required Capsule Server, select Certificates.
  8. Click Sign to the right of the required host to sign the SSL certificate for the Puppet client.
  9. Enter the puppet agent command again:

    # puppet agent -t

Chapter 4. Adding Network Interfaces

Red Hat Satellite supports specifying multiple network interfaces for a single host. You can configure these interfaces when creating a new host as described in Section 2.1, “Creating a Host in Red Hat Satellite” or when editing an existing host.

There are several types of network interfaces that you can attach to a host. When adding a new interface, select one of:

  • Interface: Allows you to specify an additional physical or virtual interface. There are two types of virtual interfaces you can create. Use VLAN when the host needs to communicate with several (virtual) networks using a single interface, while these networks are not accessible to each other. Use alias to add an additional IP address to an existing interface.

    For more information about adding a physical interface, see Section 4.1, “Adding a Physical Interface”.

    For more information about adding a virtual interface, see Section 4.2, “Adding a Virtual Interface”.

  • Bond: Creates a bonded interface. NIC bonding is a way to bind multiple network interfaces together into a single interface that appears as a single device and has a single MAC address. This enables two or more network interfaces to act as one, increasing the bandwidth and providing redundancy. See Section 4.3, “Adding a Bonded Interface” for details.
  • BMC: Baseboard Management Controller (BMC) allows you to remotely monitor and manage the physical state of machines. For more information about BMC, see Enabling Power Management on Managed Hosts in Installing Satellite Server from a Connected Network. For more information about configuring BMC interfaces, see Section 4.4, “Adding a Baseboard Management Controller (BMC) Interface”.
Note

Additional interfaces have the Managed flag enabled by default, which means the new interface is configured automatically during provisioning by the DNS and DHCP Capsule Servers associated with the selected subnet. This requires a subnet with correctly configured DNS and DHCP Capsule Servers. If you use a Kickstart method for host provisioning, configuration files are automatically created for managed interfaces in the post-installation phase at /etc/sysconfig/network-scripts/ifcfg-interface_id.

Note

Virtual and bonded interfaces currently require a MAC address of a physical device. Therefore, the configuration of these interfaces works only on bare-metal hosts.

4.1. Adding a Physical Interface

Use this procedure to add an additional physical interface to a host.

Procedure

  1. In the Satellite web UI, navigate to Hosts > All hosts.
  2. Click Edit next to the host you want to edit.
  3. On the Interfaces tab, click Add Interface.
  4. Keep the Interface option selected in the Type list.
  5. Specify a MAC address. This setting is required.
  6. Specify the Device Identifier, for example eth0. The identifier is used to specify this physical interface when creating bonded interfaces, VLANs, and aliases.
  7. Specify the DNS name associated with the host’s IP address. Satellite saves this name in the Capsule Server associated with the selected domain (the "DNS A" field) and the Capsule Server associated with the selected subnet (the "DNS PTR" field). A single host can therefore have several DNS entries.
  8. Select a domain from the Domain list. To create and manage domains, navigate to Infrastructure > Domains.
  9. Select a subnet from the Subnet list. To create and manage subnets, navigate to Infrastructure > Subnets.
  10. Specify the IP address. Managed interfaces with an assigned DHCP Capsule Server require this setting for creating a DHCP lease. DHCP-enabled managed interfaces are automatically provided with a suggested IP address.
  11. Select whether the interface is Managed. If the interface is managed, configuration is pulled from the associated Capsule Server during provisioning, and DNS and DHCP entries are created. If using kickstart provisioning, a configuration file is automatically created for the interface.
  12. Select whether this is the Primary interface for the host. The DNS name from the primary interface is used as the host portion of the FQDN.
  13. Select whether this is the Provision interface for the host. TFTP boot takes place using the provisioning interface. For image-based provisioning, the script to complete the provisioning is executed through the provisioning interface.
  14. Select whether to use the interface for Remote execution.
  15. Leave the Virtual NIC check box clear.
  16. Click OK to save the interface configuration.
  17. Click Submit to apply the changes to the host.

4.2. Adding a Virtual Interface

Use this procedure to configure a virtual interface for a host. This can be either a VLAN or an alias interface.

An alias interface is an additional IP address attached to an existing interface. An alias interface automatically inherits a MAC address from the interface it is attached to; therefore, you can create an alias without specifying a MAC address. The interface must be specified in a subnet with boot mode set to static.

Procedure

  1. In the Satellite web UI, navigate to Hosts > All hosts.
  2. Click Edit next to the host you want to edit.
  3. On the Interfaces tab, click Add Interface.
  4. Keep the Interface option selected in the Type list.
  5. Specify the general interface settings. The applicable configuration options are the same as for the physical interfaces described in Section 4.1, “Adding a Physical Interface”.

    Specify a MAC address for managed virtual interfaces so that the configuration files for provisioning are generated correctly. However, a MAC address is not required for virtual interfaces that are not managed.

    If creating a VLAN, specify ID in the form of eth1.10 in the Device Identifier field. If creating an alias, use ID in the form of eth1:10.

  6. Select the Virtual NIC check box. Additional configuration options specific to virtual interfaces are appended to the form:

    • Tag: Optionally set a VLAN tag to trunk a network segment from the physical network through to the virtual interface. If you do not specify a tag, managed interfaces inherit the VLAN tag of the associated subnet. User-specified entries from this field are not applied to alias interfaces.
    • Attached to: Specify the identifier of the physical interface to which the virtual interface belongs, for example eth1. This setting is required.
  7. Click OK to save the interface configuration.
  8. Click Submit to apply the changes to the host.

4.3. Adding a Bonded Interface

Use this procedure to configure a bonded interface for a host.

Procedure

  1. In the Satellite web UI, navigate to Hosts > All hosts.
  2. Click Edit next to the host you want to edit.
  3. On the Interfaces tab, click Add Interface.
  4. Select Bond from the Type list. Additional type-specific configuration options are appended to the form.
  5. Specify the general interface settings. The applicable configuration options are the same as for the physical interfaces described in Section 4.1, “Adding a Physical Interface”.

    Bonded interfaces use IDs in the form of bond0 in the Device Identifier field.

    A single MAC address is sufficient.

  6. Specify the configuration options specific to bonded interfaces:

    • Mode: Select the bonding mode that defines a policy for fault tolerance and load balancing. See Table 4.1, “Bonding Modes Available in Red Hat Satellite” for a brief description of each bonding mode.
    • Attached devices: Specify a comma-separated list of identifiers of attached devices. These can be physical interfaces or VLANs.
    • Bond options: Specify a space-separated list of configuration options, for example miimon=100. See the Red Hat Enterprise Linux 7 Networking Guide for details of the configuration options you can specify for the bonded interface.
  7. Click OK to save the interface configuration.
  8. Click Submit to apply the changes to the host.

For CLI Users

To create a host with a bonded interface, enter the following command:

# hammer host create --name bonded_interface \
--hostgroup-id 1 \
--ip=192.168.100.123 \
--mac=52:54:00:14:92:2a \
--subnet-id=1 \
--managed true \
   --interface="identifier=eth1, \
               mac=52:54:00:62:43:06, \
               managed=true, \
               type=Nic::Managed, \
               domain_id=1, \
               subnet_id=1" \
   --interface="identifier=eth2, \
               mac=52:54:00:d3:87:8f, \
               managed=true, \
               type=Nic::Managed, \
               domain_id=1, \
               subnet_id=1" \
   --interface="identifier=bond0, \
               ip=172.25.18.123, \
               type=Nic::Bond, \
               mode=active-backup, \
               attached_devices=[eth1,eth2], \
               managed=true, \
               domain_id=1, \
               subnet_id=1" \
--organization "Your_Organization" \
--location "Your_Location" \
--ask-root-password yes

Table 4.1. Bonding Modes Available in Red Hat Satellite

Bonding ModeDescription

balance-rr

Transmissions are received and sent sequentially on each bonded interface.

active-backup

Transmissions are received and sent through the first available bonded interface. Another bonded interface is only used if the active bonded interface fails.

balance-xor

Transmissions are based on the selected hash policy. In this mode, traffic destined for specific peers is always sent over the same interface.

broadcast

All transmissions are sent on all bonded interfaces.

802.a3

Creates aggregation groups that share the same settings. Transmits and receives on all interfaces in the active group.

balance-tlb

The outgoing traffic is distributed according to the current load on each bonded interface.

balance-alb

Receive load balancing is achieved through Address Resolution Protocol (ARP) negotiation.

4.4. Adding a Baseboard Management Controller (BMC) Interface

Use this procedure to configure a baseboard management controller (BMC) interface for a host that supports this feature.

Prerequisites

  • The ipmitool package is installed.
  • You know the MAC address, IP address, and other details of the BMC interface on the host, and the appropriate credentials for that interface.

    Note

    You only need the MAC address for the BMC interface if the BMC interface is managed, so that it can create a DHCP reservation.

Procedure

  1. Enable BMC on the Capsule server if it is not already enabled:

    1. Configure BMC power management on the Capsule Server by running the satellite-installer script with the following options:

      # satellite-installer --foreman-proxy-bmc=true \
      --foreman-proxy-bmc-default-provider=ipmitool
    2. In the Satellite web UI, navigate to Infrastructure > Capsules.
    3. From the list in the Actions column, click Refresh. The list in the Features column should now include BMC.
  2. In the Satellite web UI, navigate to Hosts > All hosts.
  3. Click Edit next to the host you want to edit.
  4. On the Interfaces tab, click Add Interface.
  5. Select BMC from the Type list. Type-specific configuration options are appended to the form.
  6. Specify the general interface settings. The applicable configuration options are the same as for the physical interfaces described in Section 4.1, “Adding a Physical Interface”.
  7. Specify the configuration options specific to BMC interfaces:

    • Username and Password: Specify any authentication credentials required by BMC.
    • Provider: Specify the BMC provider.
  8. Click OK to save the interface configuration.
  9. Click Submit to apply the changes to the host.

Chapter 5. Upgrading Hosts from RHEL 7 to RHEL 8

You can use a job template to upgrade your Red Hat Enterprise Linux 7 hosts to Red Hat Enterprise Linux 8.

Prerequisites

Procedure

  1. On Satellite, enable the foreman_plugin_leapp puppet module:

    # satellite-installer --enable-foreman-plugin-leapp
  2. In the Satellite web UI, navigate to Hosts > All Hosts.
  3. Select the hosts that you want to upgrade to Red Hat Enterprise Linux 8.
  4. In the upper right of the Hosts window, from the Select Action list, select Preupgrade check with Leapp.
  5. Click Submit to start the pre-upgrade check.
  6. When the check is finished, click the Leapp preupgrade report tab to see if LEAPP has found any issues on RHEL 7 hosts. Issues that have the Inhibitor flag are considered crucial and are likely to break the upgrade procedure. Some issues might have documentation linked that describe how to fix them.
  7. Optional: If you have issues that have commands associated with them, you can fix them with a remote job. To do that, select these issues, click the Fix Selected button, and submit the job.
  8. After you fixed the issues, click the Rerun button, and then click Submit to run the pre-upgrade check again to verify that your RHEL 7 hosts do not have any issues and are ready to be upgraded.
  9. When your systems are ready for the upgrade, click the Run Upgrade button and click submit to start the upgrade.

Chapter 6. Host Management and Monitoring Using Red Hat web console

Red Hat web console is an interactive web interface that you can use to perform actions and monitor Red Hat Enterprise Linux hosts. You can enable a remote-execution feature to integrate Satellite with Red Hat web console. When you install Red Hat web console on a host that you manage with Satellite, you can view the Red Hat web console dashboards of that host from within the Satellite web UI. You can also use the features that are integrated with Red Hat web console, for example, Red Hat Image Builder.

6.1. Integrating Satellite with Red Hat web console

By default, Red Hat web console integration is disabled in Satellite. If you want to access Red Hat web console features for your hosts from within Satellite, you must first enable Red Hat web console integration on Satellite Server.

Procedure

  • On Satellite Server, run satellite-installer with the --enable-foreman-plugin-remote-execution-cockpit option:

    # satellite-installer --enable-foreman-plugin-remote-execution-cockpit

6.2. Managing and Monitoring Hosts Using Red Hat web console

You can access the Red Hat web console web UI through the Satellite web UI and use the functionality to manage and monitor hosts in Satellite.

Prerequisites

Procedure

  1. In the Satellite web UI, navigate to Hosts > All Hosts and select the host that you want to manage and monitor with Red Hat web console.
  2. In the upper right of the host window, click Web Console.

You can now access the full range of features available for host monitoring and management, for example, Red Hat Image Builder, through the Red Hat web console.

For more information about getting started with Red Hat web console, see the Managing systems using the RHEL 8 web console guide or the Managing systems using the RHEL 7 web console guide.

For more information about using Red Hat Image Builder through Red Hat web console, see Accessing Image Builder GUI in the RHEL 8 web console or Accessing Image Builder GUI in the RHEL 7 web console.

Chapter 7. Monitoring Hosts Using Red Hat Insights

In this chapter, you can find information about creating host monitoring reports and monitoring your hosts using Red Hat Insights and creating an Insights plan.

7.1. Using Red Hat Insights with Hosts in Satellite

You can use Red Hat Insights to diagnose systems and downtime related to security exploits, performance degradation and stability failures. You can use the dashboard to quickly identify key risks to stability, security, and performance. You can sort by category, view details of the impact and resolution, and then determine what systems are affected.

To use Red Hat Insights to monitor hosts that you manage with Satellite, you must first install Red Hat Insights on your hosts and register your hosts with Red Hat Insights.

For new Satellite hosts, you can install and configure Satellite hosts with Insights during registration using the global registration template. For more information, see Registering a Host to Red Hat Satellite Using the Global Registration Template in the Managing Hosts guide.

To install and register your host using Puppet, or manually, see Red Hat Insights Getting Started.

Deploying Red Hat Insights using the Ansible Role

You can automate the installation and registration of hosts with Red Hat Insights using the RedHatInsights.insights-client Ansible role. For more information about adding this role to your Satellite, see Getting Started with Ansible in Satellite in Configuring Satellite to use Ansible.

  1. Add the RedHatInsights.insights-client role to the hosts.

    For new hosts, see Section 2.1, “Creating a Host in Red Hat Satellite”.

    For existing hosts, see Using Ansible Roles to Automate Repetitive Tasks on Satellite Hosts in Configuring Satellite to use Ansible.

  2. To run the RedHatInsights.insights-client role on your host, navigate to Hosts > All Hosts and click the name of the host that you want to use.
  3. Click the Run Ansible roles button.

When the role completes, you can view and work with the host that you add on the Insights > Overview page of the Satellite web UI.

Additional Information

  • To apply any system updates to the Red Hat Insights plug-in, enter httpd restart after updating.
  • To view the logs for Red Hat Insights and all plug-ins, go to /var/log/foreman/production.log.
  • If you have problems connecting to Red Hat Insights, ensure that your certificates are up-to-date. Refresh your subscription manifest to update your certificates.
  • You can change the default schedule for running insights-client by configuring insights-client.timer on a host. For more information, see Changing the insights-client schedule in the Client Configuration Guide for Red Hat Insights.

7.2. Creating an Insights Plan for Hosts

With Satellite 6, you can create a Red Hat Insights remediation plan and run the plan on Satellite hosts.

Procedure

To create the plan, complete the following steps:

  1. In the Satellite web UI, navigate to Insights > Inventory, and select the hosts that you want to include in an Insights plan.
  2. From the Actions list, select Create a new Plan/Playbook.
  3. From the Plan/Playbook Builder window, select Create new plan and enter a name for the plan.
  4. Select whether you want the rule to apply to a specific system, group, or all systems.
  5. Select one or more rules that you want to add to the plan. Use the Filter field to search for specific keywords.
  6. Click Save.
  7. In the Planner window, select Run Playbook.

In the Jobs window, you can view the progress of your plan as the playbook runs.

You can view the Insights plan by navigating to Insights > Planner.

Chapter 8. Using Report Templates to Monitor Hosts

You can use report templates to query Satellite data to obtain information about, for example, host status, registered hosts, applicable errata, applied errata, subscription details, and user activity. You can use the report templates that ship with Satellite or write your own custom report templates to suit your requirements. The reporting engine uses the embedded Ruby (ERB) syntax. For more information about writing templates and ERB syntax, see Appendix A, Template Writing Reference.

You can create a template, or clone a template and edit the clone. For help with the template syntax, click a template and click the Help tab.

8.1. Generating Host Monitoring Reports

To view the report templates, in the Satellite web UI, navigate to Monitor > Report Templates.

To schedule reports, you can configure a cron job or use the Satellite web UI.

Procedure

  1. In the Satellite web UI, navigate to Monitor > Report Templates.
  2. To the right of the report template that you want to use, click Generate.
  3. Optional: To schedule a report, to the right of the Generate at field, click the icon to select the date and time you want to generate the report at.
  4. Optional: To send a report to an e-mail address, select the Send report via e-mail check box, and in the Deliver to e-mail addresses field, enter the required e-mail address.
  5. Optional: Apply search query filters. To view all available results, do not populate the filter field with any values.
  6. Click Submit. A CSV file that contains the report is downloaded. If you have selected the Send report via e-mail check box, the host monitoring report is sent to your e-mail address.

For CLI Users

To generate a report, complete the following steps:

  1. List all available report templates:

    # hammer report-template list
  2. Generate a report:

    # hammer report-template generate --id template ID

    This command waits until the report fully generates before completing. If you want to generate the report as a background task, you can use the hammer report-template schedule command.

8.2. Creating a Report Template

In Satellite, you can create a report template and customize the template to suit your requirements. You can import existing report templates and further customize them with snippets and template macros.

Report templates use Embedded Ruby (ERB) syntax. To view information about working with ERB syntax and macros, in the Satellite web UI, navigate to Monitor > Report Templates, and click Create Template, and then click the Help tab.

When you create a report template in Satellite, safe mode is enabled by default. For more information about safe mode, see Section 8.8, “Report Template Safe Mode”.

For more information about writing templates, see the Appendix A, Template Writing Reference.

To view a step by step example of populating a template, see Section 8.7, “Creating a Report Template to Monitor Entitlements”.

For more information about macros you can use in report templates, see Section A.5, “Templates Macros”.

Procedure

  1. In the Satellite web UI, navigate to Monitor > Report Templates, and click Create Template.
  2. In the Name field, enter a unique name for your report template.
  3. If you want the template to be available to all locations and organizations, select Default.
  4. Create the template directly in the template editor or import a template from a text file by clicking Import. For more information about importing templates, see Section 8.5, “Importing Report Templates”.
  5. Optional: In the Audit Comment field, you can add any useful information about this template.
  6. Click the Input tab, and in the Name field, enter a name for the input that you can reference in the template in the following format: input('name'). Note that you must save the template before you can reference this input value in the template body.
  7. Select whether the input value is mandatory. If the input value is mandatory, select the Required check box.
  8. From the Value Type list, select the type of input value that the user must input.
  9. Optional: If you want to use facts for template input, select the Advanced check box.
  10. Optional: In the Options field, define the options that the user can select from. If this field remains undefined, the users receive a free-text field in which they can enter the value they want.
  11. Optional: In the Default field, enter a value, for example, a host name, that you want to set as the default template input.
  12. Optional: In the Description field, you can enter information that you want to display as inline help about the input when you generate the report.
  13. Optional: Click the Type tab, and select whether this template is a snippet to be included in other templates.
  14. Click the Location tab and add the locations where you want to use the template.
  15. Click the Organizations tab and add the organizations where you want to use the template.
  16. Click Submit to save your changes.

8.3. Exporting Report Templates

You can export report templates that you create in Satellite.

Procedure

  1. In the Satellite web UI, navigate to Monitor > Report Templates.
  2. Locate the template that you want to export, and from the list in the Actions column, select Export.
  3. Repeat this action for every report template that you want to download.

An .erb file that contains the template downloads.

For CLI Users

  1. To view the report templates available for export, enter the following command:

    # hammer report-template list

    Note the template ID of the template that you want to export in the output of this command.

  2. To export a report template, enter the following command:

    # hammer report-template dump --id template_ID > example_export.erb

8.4. Exporting Report Templates Using the Satellite API

You can use the Satellite report_templates API to export report templates from Satellite. For more information about using the Satellite API, see the API Guide.

Procedure

  1. Use the following request to retrieve a list of available report templates:

    Example request:

    $ curl --insecure --user admin:redhat \
    --request GET \
    --config https://satellite.example.com/api/report_templates \
    | json_reformat

    In this example, the json_reformat tool is used to format the JSON output.

    Example response:

    {
        "total": 6,
        "subtotal": 6,
        "page": 1,
        "per_page": 20,
        "search": null,
        "sort": {
            "by": null,
            "order": null
        },
        "results": [
            {
                "created_at": "2019-11-20 17:49:52 UTC",
                "updated_at": "2019-11-20 17:49:52 UTC",
                "name": "Applicable errata",
                "id": 112
            },
            {
                "created_at": "2019-11-20 17:49:52 UTC",
                "updated_at": "2019-11-20 17:49:52 UTC",
                "name": "Applied Errata",
                "id": 113
            },
            {
                "created_at": "2019-11-30 16:15:24 UTC",
                "updated_at": "2019-11-30 16:15:24 UTC",
                "name": "Hosts - complete list",
                "id": 158
            },
            {
                "created_at": "2019-11-20 17:49:52 UTC",
                "updated_at": "2019-11-20 17:49:52 UTC",
                "name": "Host statuses",
                "id": 114
            },
            {
                "created_at": "2019-11-20 17:49:52 UTC",
                "updated_at": "2019-11-20 17:49:52 UTC",
                "name": "Registered hosts",
                "id": 115
            },
            {
                "created_at": "2019-11-20 17:49:52 UTC",
                "updated_at": "2019-11-20 17:49:52 UTC",
                "name": "Subscriptions",
                "id": 116
            }
        ]
    }

  2. Note the id of the template that you want to export, and use the following request to export the template:

    Example request:

    $ curl --insecure --output /tmp/_Example_Export_Template.erb_ \
    --user admin:password --request GET --config \
    https://satellite.example.com/api/report_templates/158/export

    Note that 158 is an example ID of the template to export.

    In this example, the exported template is redirected to host_complete_list.erb.

8.5. Importing Report Templates

You can import a report template into the body of a new template that you want to create. Note that using the web UI, you can only import templates individually. For bulk actions, use the Satellite API. For more information, see Section 8.6, “Importing Report Templates Using the Satellite API”.

Prerequisite

Procedure

  1. In the Satellite web UI, navigate to Monitor > Report Templates, and in the upper right of the Report Templates window, click Create Template.
  2. On the upper right of the Editor tab, click the folder icon, and select the .erb file that you want to import.
  3. Edit the template to suit your requirements, and click Submit.

For more information about customizing your new template, see Appendix A, Template Writing Reference.

8.6. Importing Report Templates Using the Satellite API

You can use the Satellite API to import report templates into Satellite. Importing report templates using the Satellite API automatically parses the report template metadata and assigns organizations and locations. For more information about using the Satellite API, see the API Guide.

Prerequisite

Procedure

  1. Use the following example to format the template that you want to import to a .json file:

    # cat Example_Template.json
    {
        "name": "Example Template Name",
        "template": "
        Enter ERB Code Here
    "
    }

    Example JSON File with ERB Template:

    {
        "name": "Hosts - complete list",
        "template": "
    <%#
    name: Hosts - complete list
    snippet: false
    template_inputs:
    - name: host
      required: false
      input_type: user
      advanced: false
      value_type: plain
      resource_type: Katello::ActivationKey
    model: ReportTemplate
    -%>
    <% load_hosts(search: input('host')).each_record do |host| -%>
    <%
          report_row(
              'Server FQND': host.name
          )
    -%>
    <%  end -%>
    <%= report_render %>
    "
    }

  2. Use the following request to import the template:

    $ curl --insecure --user admin:redhat \
    --data @Example_Template.json --header "Content-Type:application/json" \
    --request POST --config https://satellite.example.com/api/report_templates/import
  3. Use the following request to retrieve a list of report templates and validate that you can view the template in Satellite:

    $ curl --insecure --user admin:redhat \
     --request GET --config https://satellite.example.com/api/report_templates | json_reformat

8.7. Creating a Report Template to Monitor Entitlements

You can use a report template to return a list of hosts with a certain subscription and to display the number of cores for those hosts.

For more information about writing templates, see Appendix A, Template Writing Reference.

Procedure

  1. In the Satellite web UI, navigate to Monitor > Report Templates, and click Create Template.
  2. Optional: In the Editor field, use the <%# > tags to add a comment with information that might be useful for later reference. For example:

    <%#
    name: Entitlements
    snippet: false
    model: ReportTemplate
    require:
    - plugin: katello
      version: 3.14.0
    -%>
  3. Add a line with the load_hosts() macro and populate the macro with the following method and variables:

    <%- load_hosts(includes: [:lifecycle_environment, :operatingsystem, :architecture, :content_view, :organization, :reported_data, :subscription_facet, :pools => [:subscription]]).each_record do |host| -%>

    To view a list of variables you can use, click the Help tab and in the Safe mode methods and variables table, find the Host::Managed row.

  4. Add a line with the host.pools variable with the each method, for example:

    <%- host.pools.each do |pool| -%>
  5. Add a line with the report_row() method to create a report and add the variables that you want to target as part of the report:

    <%-     report_row(
              'Name': host.name,
              'Organization': host.organization,
              'Lifecycle Environment': host.lifecycle_environment,
              'Content View': host.content_view,
              'Host Collections': host.host_collections,
              'Virtual': host.virtual,
              'Guest of Host': host.hypervisor_host,
              'OS': host.operatingsystem,
              'Arch': host.architecture,
              'Sockets': host.sockets,
              'RAM': host.ram,
              'Cores': host.cores,
              'SLA': host_sla(host),
              'Products': host_products(host),
              'Subscription Name': sub_name(pool),
              'Subscription Type': pool.type,
              'Subscription Quantity': pool.quantity,
              'Subscription SKU': sub_sku(pool),
              'Subscription Contract': pool.contract_number,
              'Subscription Account': pool.account_number,
              'Subscription Start': pool.start_date,
              'Subscription End': pool.end_date,
              'Subscription Guest': registered_through(host)
              ) -%>
  6. Add end statements to the template:

    <%-   end -%>
    <%- end -%>
  7. To generate a report, you must add the <%= report_render -%> macro:

    <%= report_render -%>
  8. Click Submit to save the template.

8.8. Report Template Safe Mode

When you create report templates in Satellite, safe mode is enabled by default. Safe mode limits the macros and variables that you can use in the report template. Safe mode prevents rendering problems and enforces best practices in report templates. The list of supported macros and variables is available in the Satellite web UI.

To view the macros and variables that are available, in the Satellite web UI, navigate to Monitor > Report Templates and click Create Template. In the Create Template window, click the Help tab and expand Safe mode methods.

While safe mode is enabled, if you try to use a macro or variable that is not listed in Safe mode methods, the template editor displays an error message.

To view the status of safe mode in Satellite, in the Satellite web UI, navigate to Administer > Settings and click the Provisioning tab. Locate the Safemode rendering row to check the value.

Chapter 9. Configuring Host Collections

A host collection is a group of multiple content hosts. This feature enables you to perform the same action on multiple hosts at once. These actions can include the installation, removal, and update of packages and errata, change of assigned life cycle environment, and change of Content View. You can create host collections to suit your requirements, and those of your company. For example, group hosts in host collections by function, department, or business unit.

9.1. Creating a Host Collection

The following procedure shows how to create host collections.

To Create a Host Collection:

  1. Click Hosts > Host Collections.
  2. Click New Host Collection.
  3. Add the Name of the host collection.
  4. Clear Unlimited Content Hosts, and enter the desired maximum number of hosts in the Limit field.
  5. Add the Description of the host collection.
  6. Click Save.

For CLI Users

To create a host collection, enter the following command:

# hammer host-collection create \
--organization "Your_Organization" \
--name hc_name

9.2. Cloning a Host Collection

The following procedure shows how to clone a host collection.

To Clone a Host Collection:

  1. Click Hosts > Host Collections.
  2. On the left hand panel, click the host collection you want to clone.
  3. Click Copy Collection.
  4. Specify a name for the cloned collection.
  5. Click Create.

9.3. Removing a Host Collection

The following procedure shows how to remove a host collection.

To Remove a Host Collection:

  1. Click Hosts > Host Collections.
  2. Choose the host collection to be removed.
  3. Click Remove. An alert box appears:

    Are you sure you want to remove host collection Host Collection Name?
  4. Click Remove.

9.4. Adding a Host to a Host Collection

The following procedure shows how to add hosts to host collections.

Prerequisites

A host must be registered to Red Hat Satellite to add it to a Host Collection. For more information about registering hosts, Chapter 3, Registering Hosts.

Note that if you add a host to a host collection, the Satellite auditing system does not log the change.

To Add Hosts to a Host Collection:

  1. Click Hosts > Host Collections.
  2. Click the host collection where the host should be added.
  3. On the Hosts tab, select the Add subtab.
  4. Select the hosts to be added from the table and click Add Selected.

For CLI Users

To add hosts to a host collection, enter the following command:

# hammer host-collection add-host \
--id hc_ID \
--host-ids host_ID1,host_ID2...

9.5. Removing a Host from a Host Collection

The following procedure shows how to remove hosts from host collections.

Note that if you remove a host from a host collection, the host collection record in the database is not modified so the Satellite auditing system does not log the change.

To Remove Hosts from a Host Collection:

  1. Click Hosts > Host Collections.
  2. Choose the desired host collection.
  3. On the Hosts tab, select the List/Remove subtab.
  4. Select the hosts you want to remove from the host collection and click Remove Selected.

9.6. Adding Content to a Host Collection

These steps show how to add content to host collections in Red Hat Satellite.

9.6.1. Adding Packages to a Host Collection

The following procedure shows how to add packages to host collections.

Prerequisites

  • The content to be added should be available in one of the existing repositories or added prior to this procedure.
  • Content should be promoted to the environment where the hosts are assigned.

To Add Packages to Host Collections:

  1. Click Hosts > Host Collections.
  2. Click the host collection where the package should be added.
  3. On the Collection Actions tab, click Package Installation, Removal, and Update.
  4. To update all packages, click the Update All Packages button to use the default method. Alternatively, select the drop-down icon to the right of the button to select a method to use. Selecting the via remote execution - customize first menu entry will take you to the Job invocation page where you can customize the action.
  5. Select the Package or Package Group radio button as required.
  6. In the field provided, specify the package or package group name. Then click:

    • Install — to install a new package using the default method. Alternatively, select the drop-down icon to the right of the button and select a method to use. Selecting the via remote execution - customize first menu entry will take you to the Job invocation page where you can customize the action.
    • Update — to update an existing package in the host collection using the default method. Alternatively, select the drop-down icon to the right of the button and select a method to use. Selecting the via remote execution - customize first menu entry will take you to the Job invocation page where you can customize the action.

9.6.2. Adding Errata to a Host Collection

The following procedure shows how to add errata to host collections.

Prerequisites

  • The errata to be added should be available in one of the existing repositories or added prior to this procedure.
  • Errata should be promoted to the environment where the hosts are assigned.

To Add Errata to a Host Collection:

  1. Click Hosts > Host Collections.
  2. Select the host collection where the errata should be added.
  3. On the Collection Actions tab, click Errata Installation.
  4. Select the errata you want to add to the host collection and click the Install Selected button to use the default method. Alternatively, select the drop-down icon to the right of the button to select a method to use. Selecting the via remote execution - customize first menu entry will take you to the Job invocation page where you can customize the action.

9.7. Removing Content from a Host Collection

The following procedure shows how to remove packages from host collections.

To Remove Content from a Host Collection:

  1. Click Hosts > Host Collections.
  2. Click the host collection where the package should be removed.
  3. On the Collection Actions tab, click Package Installation, Removal, and Update.
  4. Select the Package or Package Group radio button as required.
  5. In the field provided, specify the package or package group name.
  6. Click the Remove button to remove the package or package group using the default method. Alternatively, select the drop-down icon to the right of the button and select a method to use. Selecting the via remote execution - customize first menu entry will take you to the Job invocation page where you can customize the action.

9.8. Changing the Life Cycle Environment or Content View of a Host Collection

The following procedure shows how to change the assigned life cycle environment or Content View of host collections.

To Change the Life Cycle Environment or Content View of a Host Collection:

  1. Click Hosts > Host Collection.
  2. Selection the host collection where the life cycle environment or Content View should be changed.
  3. On the Collection Actions tab, click Change assigned Life Cycle Environment or Content View.
  4. Select the life cycle environment to be assigned to the host collection.
  5. Select the required Content View from the list.
  6. Click Assign.

    Note

    The changes take effect in approximately 4 hours. To make the changes take effect immediately, on the host, enter the following command:

    # subscription-manager refresh

    You can use remote execution to run this command on multiple hosts at the same time.

Chapter 10. Configuring and Setting up Remote Jobs

Use this section as a guide to configuring Satellite to execute jobs on remote hosts.

Any command that you want to apply to a remote host must be defined as a job template. After you have defined a job template you can execute it multiple times.

10.1. About Running Jobs on Hosts

You can run jobs on hosts remotely from Capsules using shell scripts or Ansible tasks and playbooks. This is referred to as remote execution.

For custom Ansible roles that you create, or roles that you download, you must install the package containing the roles on the Capsule base operating system. Before you can use Ansible roles, you must import the roles into Satellite from the Capsule where they are installed.

Communication occurs through Capsule Server, which means that Satellite Server does not require direct access to the target host, and can scale to manage many hosts. Remote execution uses the SSH service that must be enabled and running on the target host. Ensure that the remote execution Capsule has access to port 22 on the target hosts.

Satellite uses ERB syntax job templates. For more information, see Template Writing Reference in the Managing Hosts guide.

Several job templates for shell scripts and Ansible are included by default. For more information, see Section 10.14, “Setting up Job Templates”.

By default, Satellite Server is configured to use the Katello Agent rather than remote execution. To change this setting, navigate to Administer > Settings, click Content, and change the Use remote execution by default setting.

Note

Any Capsule Server base operating system is a client of Satellite Server’s internal Capsule, and therefore this section applies to any type of host connected to Satellite Server, including Capsules.

You can run jobs on multiple hosts at once, and you can use variables in your commands for more granular control over the jobs you run. You can use host facts and parameters to populate the variable values.

In addition, you can specify custom values for templates when you run the command.

For more information, see Section 10.15, “Executing a Remote Job”.

10.2. Remote Execution Workflow

When you run a remote job on hosts, for every host, Satellite performs the following actions to find a remote execution Capsule to use.

Satellite searches only for Capsules that have the remote execution feature enabled.

  1. Satellite finds the host’s interfaces that have the Remote execution check box selected.
  2. Satellite finds the subnets of these interfaces.
  3. Satellite finds remote execution Capsules assigned to these subnets.
  4. From this set of Capsules, Satellite selects the Capsule that has the least number of running jobs. By doing this, Satellite ensures that the jobs load is balanced between remote execution Capsules.
  5. If Satellite does not find a remote execution Capsule at this stage, and if the Fallback to Any Capsule setting is enabled, Satellite adds another set of Capsules to select the remote execution Capsule from. Satellite selects the most lightly loaded Capsule from the following types of Capsules that are assigned to the host:

    • DHCP, DNS and TFTP Capsules assigned to the host’s subnets
    • DNS Capsule assigned to the host’s domain
    • Realm Capsule assigned to the host’s realm
    • Puppet Master Capsule
    • Puppet CA Capsule
    • OpenSCAP Capsule
  6. If Satellite does not find a remote execution Capsule at this stage, and if the Enable Global Capsule setting is enabled, Satellite selects the most lightly loaded remote execution Capsule from the set of all Capsules in the host’s organization and location to execute a remote job.

10.3. Delegating Permissions for Remote Execution

You can control which users can run which jobs within your infrastructure, including which hosts they can target. The remote execution feature provides two built-in roles:

  • Remote Execution Manager: This role allows access to all remote execution features and functionality.
  • Remote Execution User: This role only allows running jobs; it does not provide permission to modify job templates.

You can clone the Remote Execution User role and customize its filter for increased granularity. If you adjust the filter with the view_job_templates permission, the user can only see and trigger jobs based on matching job templates. You can use the view_hosts and view_smart_proxies permissions to limit which hosts or Capsules are visible to the role.

The execute_template_invocation permission is a special permission that is checked immediately before execution of a job begins. This permission defines which job template you can run on a particular host. This allows for even more granularity when specifying permissions. For more information on working with roles and permissions see Creating and Managing Roles in the Administering Red Hat Satellite.

The following example shows filters for the execute_template_invocation permission:

name = Reboot and host.name = staging.example.com
name = Reboot and host.name ~ *.staging.example.com
name = "Restart service" and host_group.name = webservers

The first line in this example permits the user to apply the Reboot template to one selected host. The second line defines a pool of hosts with names ending with .staging.example.com. The third line binds the template with a host group.

Note

Permissions assigned to users can change over time. If a user has already scheduled some jobs to run in the future, and the permissions have changed, this can result in execution failure because the permissions are checked immediately before job execution.

10.4. Creating a Job Template:

  1. Navigate to Hosts > Job templates.
  2. Click New Job Template.
  3. Click the Template tab, and in the Name field, enter a unique name for your job template.
  4. Select Default to make the template available for all organizations and locations.
  5. Create the template directly in the template editor or upload it from a text file by clicking Import.
  6. Optional: In the Audit Comment field, add information about the change.
  7. Click the Job tab, and in the Job category field, enter your own category or select from the default categories listed in Section B.2, “Default Job Template Categories”.
  8. Optional: In the Description Format field, enter a description template. For example, Install package %{package_name}. You can also use %{template_name} and %{job_category} in your template.
  9. From the Provider Type list, select SSH for shell scripts and Ansible for Ansible tasks or playbooks.
  10. Optional: In the Timeout to kill field, enter a timeout value to terminate the job if it does not complete.
  11. Optional: Click Add Input to define an input parameter. Parameters are requested when executing the job and do not have to be defined in the template. For examples, see the Help tab.
  12. Optional: Click Foreign input set to include other templates in this job.
  13. Optional: In the Effective user area, configure a user if the command cannot use the default remote_execution_effective_user setting.
  14. Optional: If this template is a snippet to be included in other templates, click the Type tab and select Snippet.
  15. Click the Location tab and add the locations where you want to use the template.
  16. Click the Organizations tab and add the organizations where you want to use the template.
  17. Click Submit to save your changes.

You can extend and customize job templates by including other templates in the template syntax. For more information, see the appendices in the Managing Hosts guide.

For CLI Users

To create a job template using a template-definition file, enter the following command:

# hammer job-template create \
--file "path_to_template_file" \
--name "template_name" \
--provider-type SSH \
--job-category "category_name"

10.5. Configuring the Fallback to Any Capsule Remote Execution Setting in Satellite

You can enable the Fallback to Any Capsule setting to configure Satellite to search for remote execution Capsules from the list of Capsules that are assigned to hosts. This can be useful if you need to run remote jobs on hosts that have no subnets configured or if the hosts' subnets are assigned to Capsules that do not have the remote execution feature enabled.

If the Fallback to Any Capsule setting is enabled, Satellite adds another set of Capsules to select the remote execution Capsule from. Satellite also selects the most lightly loaded Capsule from the set of all Capsules assigned to the host, such as the following:

  • DHCP, DNS and TFTP Capsules assigned to the host’s subnets
  • DNS Capsule assigned to the host’s domain
  • Realm Capsule assigned to the host’s realm
  • Puppet Master Capsule
  • Puppet CA Capsule
  • OpenSCAP Capsule

Procedure

  1. In the Satellite web UI, navigate to Administer > Settings.
  2. Click RemoteExecution.
  3. Configure the Fallback to Any Capsule setting.

For CLI Users

Enter the hammer settings set command on Satellite to configure the Fallback to Any Capsule setting. For example, to set the value to true, enter the following command:

# hammer settings set --name=remote_execution_fallback_proxy --value=true

10.6. Configuring the Global Capsule Remote Execution Setting in Satellite

By default, Satellite searches for remote execution Capsules in hosts' organizations and locations regardless of whether Capsules are assigned to hosts' subnets or not. You can disable the Enable Global Capsule setting if you want to limit the search to the Capsules that are assigned to hosts' subnets.

If the Enable Global Capsule setting is enabled, Satellite adds another set of Capsules to select the remote execution Capsule from. Satellite also selects the most lightly loaded remote execution Capsule from the set of all Capsules in the host’s organization and location to execute a remote job.

Procedure

  1. In the Satellite web UI, navigate to Administer > Settings.
  2. Click RemoteExection.
  3. Configure the Enable Global Capsule setting.

For CLI Users

Enter the hammer settings set command on Satellite to configure the Enable Global Capsule setting. For example, to set the value to true, enter the following command:

# hammer settings set --name=remote_execution_global_proxy --value=true

10.7. Configuring Satellite to Use an Alternative Directory to Execute Remote Jobs on Hosts

By default, Satellite uses the /var/tmp directory on the client system to execute the remote execution jobs. If the client system has noexec set for the /var/ volume or file system, you must configure Satellite to use an alternative directory because otherwise the remote execution job fails since the script cannot be run.

Procedure

To use an alternative directory, complete this procedure.

  1. Create a new directory, for example new_place:

    # mkdir /remote_working_dir
  2. Copy the SELinux context from the default var directory:

    # chcon --reference=/var /remote_working_dir
  3. Edit the remote_working_dir setting in the /etc/foreman-proxy/settings.d/remote_execution_ssh.yml file to point to the required directory, for example:

    :remote_working_dir: /remote_working_dir

10.8. Distributing SSH Keys for Remote Execution

To use SSH keys for authenticating remote execution connections, you must distribute the public SSH key from Capsule to its attached hosts that you want to manage. Ensure that the SSH service is enabled and running on the hosts. Configure any network or host-based firewalls to enable access to port 22.

Use one of the following methods to distribute the public SSH key from Capsule to target hosts:

Satellite distributes SSH keys for the remote execution feature to the hosts provisioned from Satellite by default.

If the hosts are running on Amazon Web Services, enable password authentication. For more information, see https://aws.amazon.com/premiumsupport/knowledge-center/new-user-accounts-linux-instance.

10.9. Distributing SSH Keys for Remote Execution Manually

To distribute SSH keys manually, complete the following steps:

Procedure

  1. Enter the following command on Capsule. Repeat for each target host you want to manage:

    # ssh-copy-id -i ~foreman-proxy/.ssh/id_rsa_foreman_proxy.pub root@target.example.com
  2. To confirm that the key was successfully copied to the target host, enter the following command on Capsule:

    # ssh -i ~foreman-proxy/.ssh/id_rsa_foreman_proxy root@target.example.com

10.10. Using the Satellite API to Obtain SSH Keys for Remote Execution

To use the Satellite API to download the public key from Capsule, complete this procedure on each target host.

Procedure

  1. On the target host, create the /.ssh directory to store the SSH key:

    # mkdir ~/.ssh
  2. Download the SSH key from Capsule:

    # curl https://capsule.example.com:9090/ssh/pubkey >> ~/.ssh/authorized_keys
  3. Configure permissions for the ~/.ssh directory:

    # chmod 700 ~/.ssh
  4. Configure permissions for the authorized_keys file:

    # chmod 600 ~/.ssh/authorized_keys

10.11. Configuring a Kickstart Template to Distribute SSH Keys during Provisioning

You can add a remote_execution_ssh_keys snippet to your custom kickstart template to deploy SSH Keys to hosts during provisioning. Kickstart templates that Satellite ships include this snippet by default. Therefore, Satellite copies the SSH key for remote execution to the systems during provisioning.

Procedure

  • To include the public key in newly-provisioned hosts, add the following snippet to the Kickstart template that you use:

    <%= snippet 'remote_execution_ssh_keys' %>

10.12. Configuring a keytab for Kerberos Ticket Granting Tickets

Use this procedure to configure Satellite to use a keytab to obtain Kerberos ticket granting tickets. If you do not set up a keytab, you must manually retrieve tickets.

Procedure

To ensure that the foreman-proxy user on Satellite can obtain Kerberos ticket granting tickets, complete the following steps:

  1. Find the ID of the foreman-proxy user:

    # id -u foreman-proxy
  2. Modify the umask value so that new files have the permissions 600:

    # umask 077
  3. Create the directory for the keytab:

    # mkdir -p "/var/kerberos/krb5/user/USER_ID"
  4. Create a keytab or copy an existing keytab to the directory:

    # cp your_client.keytab /var/kerberos/krb5/user/USER_ID/client.keytab
  5. Change the directory owner to the foreman-proxy user:

    # chown -R foreman-proxy:foreman-proxy "/var/kerberos/krb5/user/USER_ID"
  6. Ensure that the keytab file is read-only:

    # chmod -wx "/var/kerberos/krb5/user/USER_ID/client.keytab"
  7. Restore the SELinux context:

    # restorecon -RvF /var/kerberos/krb5

10.13. Configuring Kerberos Authentication for Remote Execution

You can use Kerberos authentication to establish an SSH connection for remote execution on Satellite hosts.

Prerequisites

Before you can use Kerberos authentication for remote execution on Red Hat Satellite, you must set up a Kerberos server for identity management and ensure that you complete the following prerequisites:

  • Enroll Satellite Server on the Kerberos server
  • Enroll the Satellite target host on the Kerberos server
  • Configure and initialize a Kerberos user account for remote execution
  • Ensure that the foreman-proxy user on Satellite has a valid Kerberos ticket granting ticket

Procedure

To set up Satellite to use Kerberos authentication for remote execution on hosts, complete the following steps:

  1. To install and enable Kerberos authentication for remote execution, enter the following command:

    # satellite-installer --scenario satellite \
     --foreman-proxy-plugin-remote-execution-ssh-ssh-kerberos-auth true
  2. To edit the default user for remote execution, in the Satellite web UI, navigate to Administer > Settings and click the RemoteExecution tab. In the SSH User row, edit the second column and add the user name for the Kerberos account.
  3. Navigate to remote_execution_effective_user and edit the second column to add the user name for the Kerberos account.

To confirm that Kerberos authentication is ready to use, run a remote job on the host.

10.14. Setting up Job Templates

Satellite provides default job templates that you can use for executing jobs. To view the list of job templates, navigate to Hosts > Job templates. If you want to use a template without making changes, proceed to Section 10.15, “Executing a Remote Job”.

You can use default templates as a base for developing your own. Default job templates are locked for editing. Clone the template and edit the clone.

  1. To clone a template, in the Actions column, select Clone.
  2. Enter a unique name for the clone and click Submit to save the changes.

Job templates use the Embedded Ruby (ERB) syntax. For more information about writing templates, see the Template Writing Reference in the Managing Hosts guide.

Ansible Considerations

To create an Ansible job template, use the following procedure and instead of ERB syntax, use YAML syntax. Begin the template with ---. You can embed an Ansible playbook YAML file into the job template body. You can also add ERB syntax to customize your YAML Ansible template. You can also import Ansible playbooks in Satellite. For more information, see Synchronizing Repository Templates in the Managing Hosts guide.

Parameter Variables

At run time, job templates can accept parameter variables that you define for a host. Note that only the parameters visible on the Parameters tab at the host’s edit page can be used as input parameters for job templates. If you do not want your Ansible job template to accept parameter variables at run time, in the Satellite web UI, navigate to Administer > Settings and click the Ansible tab. In the Top level Ansible variables row, change the Value parameter to No.

10.15. Executing a Remote Job

You can execute a job that is based on a job template against one or more hosts.

Procedure

  1. Navigate to Hosts > All Hosts and select the target hosts on which you want to execute a remote job. You can use the search field to filter the host list.
  2. From the Select Action list, select Schedule Remote Job.
  3. On the Job invocation page, define the main job settings:
  4. Select the Job category and the Job template you want to use.
  5. Optional: Select a stored search string in the Bookmark list to specify the target hosts.
  6. Optional: Further limit the targeted hosts by entering a Search query. The Resolves to line displays the number of hosts affected by your query. Use the refresh button to recalculate the number after changing the query. The preview icon lists the targeted hosts.
  7. The remaining settings depend on the selected job template. See Section 10.4, “Creating a Job Template:” for information on adding custom parameters to a template.
  8. Optional: To configure advanced settings for the job, click Display advanced fields. Some of the advanced settings depend on the job template, the following settings are general:

    • Effective user defines the user for executing the job, by default it is the SSH user.
    • Concurrency level defines the maximum number of jobs executed at once, which can prevent overload of systems' resources in a case of executing the job on a large number of hosts.
    • Timeout to kill defines time interval in seconds after which the job should be killed, if it is not finished already. A task which could not be started during the defined interval, for example, if the previous task took too long to finish, is canceled.
    • Type of query defines when the search query is evaluated. This helps to keep the query up to date for scheduled tasks.
    • Execution ordering determines the order in which the job is executed on hosts: alphabetical or randomized.

      Concurrency level and Timeout to kill settings enable you to tailor job execution to fit your infrastructure hardware and needs.

  9. To run the job immediately, ensure that Schedule is set to Execute now. You can also define a one-time future job, or set up a recurring job. For recurring tasks, you can define start and end dates, number and frequency of runs. You can also use cron syntax to define repetition. For more information about cron, see the Automating System Tasks section of the Red Hat Enterprise Linux 7 System Administrator’s Guide.
  10. Click Submit. This displays the Job Overview page, and when the job completes, also displays the status of the job.

For CLI Users

Enter the following command on Satellite:

# hammer settings set --name=remote_execution_global_proxy --value=false

To execute a remote job with custom parameters, complete the following steps:

  1. Find the ID of the job template you want to use:

    # hammer job-template list
  2. Show the template details to see parameters required by your template:

    # hammer job-template info --id template_ID
  3. Execute a remote job with custom parameters:

    # hammer job-invocation create \
    --job-template "template_name" \
    --inputs key1="value",key2="value",... \
    --search-query "query"

    Replace query with the filter expression that defines hosts, for example "name ~ rex01". For more information about executing remote commands with hammer, enter hammer job-template --help and hammer job-invocation --help.

10.16. Monitoring Jobs

You can monitor the progress of the job while it is running. This can help in any troubleshooting that may be required.

Ansible jobs run on batches of 100 hosts, so you cannot cancel a job running on a specific host. A job completes only after the Ansible playbook runs on all hosts in the batch.

Procedure

  1. Navigate to the Job page. This page is automatically displayed if you triggered the job with the Execute now setting. To monitor scheduled jobs, navigate to Monitor > Jobs and select the job run you wish to inspect.
  2. On the Job page, click the Hosts tab. This displays the list of hosts on which the job is running.
  3. In the Host column, click the name of the host that you want to inspect. This displays the Detail of Commands page where you can monitor the job execution in real time.
  4. Click Back to Job at any time to return to the Job Details page.

For CLI Users

To monitor the progress of a job while it is running, complete the following steps:

  1. Find the ID of a job:

    # hammer job-invocation list
  2. Monitor the job output:

    # hammer job-invocation output \
    --id job_ID \
    --host host_name
  3. Optional: to cancel a job, enter the following command:

    # hammer job-invocation cancel \
    --id job_ID

Chapter 11. Host Management Without Goferd and Katello Agent

The goferd service that is used by the Katello agent to manage packages on content hosts consumes large amount of resources. To reduce memory and CPU load on content hosts, you can manage packages through remote execution.

Note that the Katello agent is deprecated and will be removed in a future Satellite version; therefore, using remote execution will be the only way to manage packages on hosts.

Prerequisites

  • You have enabled the Satellite Tools 6.9 repository on Satellite Server. For more information, see Enabling the Satellite Tools 6.9 Repository in Installing Satellite Server from a Connected Network.
  • You have synchronized the Satellite Tools 6.9 repository on Satellite Server. For more information, see Synchronizing the Satellite Tools 6.9 Repository in Installing Satellite Server from a Connected Network.
  • You have enabled the Satellite Tools 6.9 repository on content hosts.

Procedure

  1. Install the katello-host-tools package on content hosts:

    # yum install katello-host-tools
  2. Stop the goferd service on content hosts:

    # systemctl stop goferd.service
  3. Disable the goferd service on content hosts:

    # systemctl disable goferd.service
  4. Remove the Katello agent on content hosts:

    Warning

    If your host is installed on Red Hat Virtualization version 4.4 or lower, do not remove the katello-agent package because the removed dependencies corrupt the host.

    # yum remove katello-agent
  5. Distribute the SSH keys to the content hosts. For more information, see Section 10.8, “Distributing SSH Keys for Remote Execution”.
  6. In the Satellite web UI, navigate to Administer > Settings.
  7. Select the Content tab.
  8. Set the Use remote execution by default parameter to Yes.

The Satellite server now uses host management by remote execution instead of goferd.

Hammer Limitations

The following applies if you are using the hammer command to push errata. The hammer command is dependent on goferd to manage errata on content hosts. As a workaround, use the Satellite remote execution feature to apply errata.

For example, enter the following command to perform a yum -y update on host123.example.org:

# hammer job-invocation create \
--job-template "Run Command - SSH Default" \
--inputs command="yum -y update" \
--search-query "name ~ host123"
Job invocation 24 created
[.........................................] [100%]
1 task(s), 1 success, 0 fail

Chapter 12. Synchronizing Template Repositories

In Satellite, you can synchronize repositories of job templates, provisioning templates, report templates, and partition table templates between Satellite Server and a version control system or local directory. In this chapter, a Git repository is used for demonstration purposes.

This section details the workflow for:

  • installing and configuring the TemplateSync plug-in
  • performing exporting and importing tasks

12.1. Enabling the TemplateSync plug-in

  1. To enable the plug-in on your Satellite Server, enter the following command:

    # satellite-installer --enable-foreman-plugin-templates
  2. To verify that the plug-in is installed correctly, ensure Administer > Settings includes the TemplateSync menu.

12.2. Configuring the TemplateSync plug-in

In the Satellite web UI, navigate to Administer > Settings > TemplateSync to configure the plug-in. The following table explains the attributes behavior. Note that some attributes are used only for importing or exporting tasks.

Table 12.1. Synchronizing Templates Plug-in configuration

ParameterAPI parameter nameMeaning on importingMeaning on exporting

Associate

associate

Accepted values: always, new, never

Associates templates with OS, Organization, and Location based on metadata.

N/A

Branch

branch

Specifies the default branch in Git repository to read from.

Specifies the default branch in Git repository to write to.

Dirname

dirname

Specifies the subdirectory under the repository to read from.

Specifies the subdirectory under the repository to write to.

Filter

filter

Imports only templates with names that match this regular expression.

Exports only templates with names that match this regular expression.

Force import

force

Imported templates overwrite locked templates with the same name.

N/A

Lock templates

lock

Do not overwrite existing templates when you import a new template with the same name, unless Force import is enabled.

N/A

Metadata export mode

metadata_export_mode

Accepted values: refresh, keep, remove

N/A

Defines how metadata is handled when exporting:

  • Refresh — remove existing metadata from the template content and generate new metadata based on current assignments and attributes.
  • Keep — retain the existing metadata.
  • Remove — export template without metadata. Useful if you want to add metadata manually.

Negate

negate

Accepted values: true, false

Imports templates ignoring the filter attribute.

Exports templates ignoring the filter attribute.

Prefix

prefix

Adds specified string to the beginning of the template if the template name does not start with the prefix already.

N/A

Repo

repo

Defines the path to the repository to synchronize from.

Defines the path to a repository to export to.

Verbosity

verbose

Accepted values: true, false

Enables writing verbose messages to the logs for this action.

N/A

12.3. Importing and Exporting Templates

You can import and export templates using the Satellite web UI, Hammer CLI, or Satellite API. Satellite API calls use the role-based access control system, which enables the tasks to be executed as any user. You can synchronize templates with a version control system, such as Git, or a local directory.

12.3.1. Importing Templates

You can import templates from a repository of your choice. You can use different protocols to point to your repository, for example /tmp/dir, git://example.com, https://example.com, and ssh://example.com.

Prerequisites

  • Each template must contain the location and organization that the template belongs to. This applies to all template types. Before you import a template, ensure that you add the following section to the template:

    <%#
    kind: provision
    name: My Kickstart File
    oses:
    - RedHat 7
    - RedHat 6
    locations:
    - First Location
    - Second Location
    organizations:
    - Default Organization
    - Extra Organization
    %>

Procedure

  1. In the Satellite web UI, navigate to Hosts > Sync Templates.
  2. Click Import.
  3. Each field is populated with values configured in Administer > Settings > TemplateSync. Change the values as required for the templates you want to import. For more information about each field, see Section 12.2, “Configuring the TemplateSync plug-in”.
  4. Click Submit.

The Satellite web UI displays the status of the import. The status is not persistent; if you leave the status page, you cannot return to it.

For CLI Users

  • To import a template from a repository, enter the following command:

    $ hammer import-templates \
        --prefix '[Custom Index] ' \
        --filter '.*Template Name$' \
        --repo https://github.com/examplerepo/exampledirectory \
        --branch my_branch \
        --organization 'Default Organization'

    For better indexing and management of your templates, use --prefix to set a category for your templates. To select certain templates from a large repository, use --filter to define the title of the templates that you want to import. For example --filter '.*Ansible Default$' imports various Ansible Default templates.

12.3.2. Exporting Templates

You can export templates to a version control server, such as a Git repository.

Procedure

  1. In the Satellite web UI, navigate to Hosts > Sync Templates.
  2. Click Export.
  3. Each field is populated with values configured in Administer > Settings > TemplateSync. Change the values as required for the templates you want to export. For more information about each field, see Section 12.2, “Configuring the TemplateSync plug-in”.
  4. Click Submit.

The Satellite web UI displays the status of the export. The status is not persistent; if you leave the status page, you cannot return to it.

For CLI Users

  1. Clone a local copy of your Git repository:

    $ git clone https://github.com/theforeman/community-templates /custom/templates
  2. Change the owner of your local directory to the foreman user, and change the SELinux context with the following commands:

    # chown -R foreman:foreman /custom/templates
    # chcon -R -t httpd_sys_rw_content_t /custom/templates
  3. To export the templates to your local repository, enter the following command:

    hammer export-templates --organization 'Default Organization' --repo /custom/templates

12.3.3. Synchronizing Templates Using the Satellite API

Prerequisites

  • Each template must contain the location and organization that the template belongs to. This applies to all template types. Before you import a template, ensure that you add the following section to the template:

    <%#
    kind: provision
    name: My Kickstart File
    oses:
    - RedHat 7
    - RedHat 6
    locations:
    - First Location
    - Second Location
    organizations:
    - Default Organization
    - Extra Organization
    %>

Procedure

  1. Configure a version control system that uses SSH authorization, for example gitosis, gitolite, or git daemon.
  2. Configure the TemplateSync plug-in settings on a TemplateSync tab.

    1. Change the Branch setting to match the target branch on a Git server.
    2. Change the Repo setting to match the Git repository. For example, for the repository located in git@git.example.com/templates.git set the setting into ssh://git@git.example.com/templates.git.
  3. Accept Git SSH host key as the foreman user:

    # sudo -u foreman ssh git.example.com

    You can see the Permission denied, please try again. message in the output, which is expected, because the SSH connection cannot succeed yet.

  4. Create an SSH key pair if you do not already have it. Do not specify a passphrase.

    # sudo -u foreman ssh-keygen
  5. Configure your version control server with the public key from your Satellite, which resides in /usr/share/foreman/.ssh/id_rsa.pub.
  6. Export templates from your Satellite Server to the version control repository specified in the TemplateSync menu:

    $ curl -H "Accept:application/json,version=2" \
    -H "Content-Type:application/json" \
    -u login:password \
    -k https://_satellite.example.com/api/v2/templates/export \
    -X POST
    
    {"message":"Success"}
  7. Import templates to Satellite Server after their content was changed:

    $ curl -H "Accept:application/json,version=2" \
    -H "Content-Type:application/json" \
    -u login:password \
    -k https://_satellite.example.com/api/v2/templates/import \
    -X POST
    
    {“message”:”Success”}

    Note that templates provided by Satellite are locked and you cannot import them by default. To overwrite this behavior, change the Force import setting in the TemplateSync menu to yes or add the force parameter -d '{ "force": "true" }’ to the import command.

12.3.4. Synchronizing Templates with a Local Directory Using the Satellite API

Synchronizing templates with a local directory is useful if you have configured a version control repository in the local directory. That way, you can edit templates and track the history of edits in the directory. You can also synchronize changes to Satellite Server after editing the templates.

Prerequisites

  • Each template must contain the location and organization that the template belongs to. This applies to all template types. Before you import a template, ensure that you add the following section to the template:

    <%#
    kind: provision
    name: My Kickstart File
    oses:
    - RedHat 7
    - RedHat 6
    locations:
    - First Location
    - Second Location
    organizations:
    - Default Organization
    - Extra Organization
    %>

Procedure

  1. Create the directory where templates are stored and apply appropriate permissions and SELinux context:

    # mkdir -p /usr/share/templates_dir/
    # chown foreman /usr/share/templates_dir/
    # chcon -t httpd_sys_rw_content_t /usr/share/templates_dir/ -R
  2. Change the Repo setting on the TemplateSync tab to match the export directory /usr/share/templates_dir/.
  3. Export templates from your Satellite Server to a local directory:

    $ curl -H "Accept:application/json,version=2" \
    -H "Content-Type:application/json" \
    -u login:password \
    -k https://_satellite.example.com/api/v2/templates/export \
    -X POST \
    
    {"message":"Success"}
  4. Import templates to Satellite Server after their content was changed:

    $ curl -H "Accept:application/json,version=2" \
    -H "Content-Type:application/json" \
    -u login:password \
    -k https://_satellite.example.com/api/v2/templates/import \
    -X POST
    
    {“message”:”Success”}

    Note that templates provided by Satellite are locked and you cannot import them by default. To overwrite this behavior, change the Force import setting in the TemplateSync menu to yes or add the force parameter -d '{ "force": "true" }’ to the import command.

Note

You can override default API settings by specifying them in the request with the -d parameter. The following example exports templates to the git.example.com/templates repository:

$ curl -H "Accept:application/json,version=2" \
-H "Content-Type:application/json" \
-u login:password \
-k https://satellite.example.com/api/v2/templates/export \
-X POST \
-d "{\"repo\":\"git.example.com/templates\"}"

12.4. Advanced Git Configuration

You can perform additional Git configuration for the TemplateSync plug-in using the command line or editing the .gitconfig file.

Accepting a self-signed Git certificate

If you are using a self-signed certificate authentication on your Git server, validate the certificate with the git config http.sslCAPath command.

For example, the following command verifies a self-signed certificate stored in /cert/cert.pem:

# sudo -u foreman git config --global http.sslCAPath cert/cert.pem

For a complete list of advanced options, see the git-config manual page.

12.5. Uninstalling the plug-in

To avoid errors after removing the foreman_templates plugin:

  1. Disable the plug-in using the Satellite installer:

    # satellite-installer --no-enable-foreman-plugin-templates
  2. Clean custom data of the plug-in. The command does not affect any templates that you created.

    # foreman-rake templates:cleanup
  3. Uninstall the plug-in:

    # satellite-maintain packages remove foreman-plugin-templates

Appendix A. Template Writing Reference

Embedded Ruby (ERB) is a tool for generating text files based on templates that combine plain text with Ruby code. Red Hat Satellite uses ERB syntax in the following cases:

Provisioning templates
For more information, see Creating Provisioning Templates in the Provisioning Guide.
Remote execution job templates
For more information, see Chapter 10, Configuring and Setting up Remote Jobs.
Report templates
For more information, see Chapter 8, Using Report Templates to Monitor Hosts.
Templates for partition tables
For more information, see Creating Partition Tables in the Provisioning Guide.
Smart Variables
For more information, see Configuring Smart Variables in the Puppet Guide.
Smart Class Parameters
For more information, see Configuring Smart Class Parameters in the Puppet Guide.

This section provides an overview of Satellite-specific macros and variables that can be used in ERB templates along with some usage examples. Note that the default templates provided by Red Hat Satellite (Hosts > Provisioning templates, Hosts > Job templates, Monitor > Report Templates ) also provide a good source of ERB syntax examples.

When provisioning a host or running a remote job, the code in the ERB is executed and the variables are replaced with the host specific values. This process is referred to as rendering. The Satellite Server has the safemode rendering option enabled by default, which prevents any harmful code being executed from templates.

A.1. Accessing the Template Writing Reference in the Satellite web UI

You can access the template writing reference document in the Satellite web UI.

  1. Log in to the Satellite web UI.
  2. Navigate to Administer > About.
  3. Click the Templates DSL link in the Support section.

A.2. Writing ERB Templates

The following tags are the most important and commonly used in ERB templates:

<% %>

All Ruby code is enclosed within <% %> in an ERB template. The code is executed when the template is rendered. It can contain Ruby control flow structures as well as Satellite-specific macros and variables. For example:

<% if @host.operatingsystem.family == "Redhat" && @host.operatingsystem.major.to_i > 6 -%>
systemctl <%= input("action") %> <%= input("service") %>
<% else -%>
service <%= input("service") %> <%= input("action") %>
<% end -%>

Note that this template silently performs an action with a service and returns nothing at the output.

<%= %>

This provides the same functionality as <% %> but when the template is executed, the code output is inserted into the template. This is useful for variable substitution, for example:

Example input:

echo <%= @host.name %>

Example rendering:

host.example.com

Example input:

<% server_name = @host.fqdn %>
<%= server_name %>

Example rendering:

host.example.com

Note that if you enter an incorrect variable, no output is returned. However, if you try to call a method on an incorrect variable, the following error message returns:

Example input:

<%= @example_incorrect_variable.fqdn -%>

Example rendering:

undefined method `fqdn' for nil:NilClass

<% -%>, <%= -%>

By default, a newline character is inserted after a Ruby block if it is closed at the end of a line:

Example input:

<%= "line1" %>
<%= "line2" %>

Example rendering:

line1
line2

To change the default behavior, modify the enclosing mark with -%>:

Example input:

<%= "line1" -%>
<%= "line2" %>

Example rendering:

line1line2

This is used to reduce the number of lines, where Ruby syntax permits, in rendered templates. White spaces in ERB tags are ignored.

An example of how this would be used in a report template to remove unnecessary newlines between a FQDN and IP address:

Example input:

<%= @host.fqdn -%>
<%= @host.ip -%>

Example rendering:

host.example.com10.10.181.216

<%# %>

Encloses a comment that is ignored during template rendering:

Example input:

<%# A comment %>

This generates no output.

Indentation in ERB templates

Because of the varying lengths of the ERB tags, indenting the ERB syntax might seem messy. ERB syntax ignore white space. One method of handling the indentation is to declare the ERB tag at the beginning of each new line and then use white space within the ERB tag to outline the relationships within the syntax, for example:

<%- load_hosts.each do |host| -%>
<%-   if host.build? %>
<%=     host.name %> build is in progress
<%-   end %>
<%- end %>

A.3. Troubleshooting ERB Templates

The Satellite web UI provides two ways to verify the template rendering for a specific host:

  • Directly in the template editor – when editing a template (under Hosts > Partition tables, Hosts > Provisioning templates, or Hosts > Job templates), on the Template tab click Preview and select a host from the list. The template then renders in the text field using the selected host’s parameters. Preview failures can help to identify issues in your template.
  • At the host’s details page – select a host at Hosts > All hosts and click the Templates tab to list templates associated with the host. Select Review from the list next to the selected template to view it’s rendered version.

A.4. Generic Satellite-Specific Macros

This section lists Satellite-specific macros for ERB templates.

You can use the macros listed in the following table across all kinds of templates.

Table A.1. Generic Macros

NameDescription

indent(n)

Indents the block of code by n spaces, useful when using a snippet template that is not indented.

foreman_url(kind)

Returns the full URL to host-rendered templates of the given kind. For example, templates of the "provision" type usually reside at http://HOST/unattended/provision.

snippet(name)

Renders the specified snippet template. Useful for nesting provisioning templates.

snippets(file)

Renders the specified snippet found in the Foreman database, attempts to load it from the unattended/snippets/ directory if it is not found in the database.

snippet_if_exists(name)

Renders the specified snippet, skips if no snippet with the specified name is found.

A.5. Templates Macros

If you want to write custom templates, you can use some of the following macros.

Depending on the template type, some of the following macros have different requirements.

For more information about the available macros for report templates, in the Satellite web UI, navigate to Monitor > Report Templates, and click Create Template. In the Create Template window, click the Help tab.

For more information about the available macros for job templates, in the Satellite web UI, navigate to Hosts > Job Templates, and click the New Job Template. In the New Job Template window, click the Help tab.

input

Using the input macro, you can customize the input data that the template can work with. You can define the input name, type, and the options that are available for users. For report templates, you can only use user inputs. When you define a new input and save the template, you can then reference the input in the ERB syntax of the template body.

<%= input('cpus') %>

This loads the value from user input cpus.

load_hosts

Using the load_hosts macro, you can generate a complete list of hosts.

<%- load_hosts().each_record do |host| -%>
<%=     host.name %>

Use the load_hosts macro with the each_record macro to load records in batches of 1000 to reduce memory consumption.

If you want to filter the list of hosts for the report, you can add the option search: input(‘Example_Host’):

<% load_hosts(search: input('Example_Host')).each_record do |host| -%>
<%=  host.name %>
<% end -%>

In this example, you first create an input that you then use to refine the search criteria that the load_hosts macro retrieves.

report_row

Using the report_row macro, you can create a formatted report for ease of analysis. The report_row macro requires the report_render macro to generate the output.

Example input:

<%- load_hosts(search: input('Example_Host')).each_record do |host| -%>
<%-   report_row(
        'Server FQDN': host.name
      ) -%>
<%- end -%>
<%= report_render -%>

Example rendering:

Server FQDN
host1.example.com
host2.example.com
host3.example.com
host4.example.com
host5.example.com
host6.example.com

You can add extra columns to the report by adding another header. The following example adds IP addresses to the report:

Example input:

<%- load_hosts(search: input('host')).each_record do |host| -%>
<%-   report_row(
      'Server FQDN': host.name,
           'IP': host.ip
      ) -%>
<%- end -%>
<%= report_render -%>

Example rendering:

Server FQDN,IP
host1.example.com,10.8.30.228
host2.example.com,10.8.30.227
host3.example.com,10.8.30.226
host4.example.com,10.8.30.225
host5.example.com,10.8.30.224
host6.example.com,10.8.30.223

report_render

This macro is available only for report templates.

Using the report_render macro, you create the output for the report. During the template rendering process, you can select the format that you want for the report. YAML, JSON, HTML, and CSV formats are supported.

<%= report_render -%>
render_template()

This macro is available only for job templates.

Using this macro, you can render a specific template. You can also enable and define arguments that you want to pass to the template.

A.6. Host-Specific Variables

The following variables enable using host data within templates. Note that job templates accept only @host variables.

Table A.2. Host Specific Variables and Macros

NameDescription

@host.architecture

The architecture of the host.

@host.bond_interfaces

Returns an array of all bonded interfaces. See Section A.9, “Parsing Arrays”.

@host.capabilities

The method of system provisioning, can be either build (for example kickstart) or image.

@host.certname

The SSL certificate name of the host.

@host.diskLayout

The disk layout of the host. Can be inherited from the operating system.

@host.domain

The domain of the host.

@host.environment

The Puppet environment of the host.

@host.facts

Returns a Ruby hash of facts from Facter. For example to access the 'ipaddress' fact from the output, specify @host.facts['ipaddress'].

@host.grub_pass

Returns the host’s GRUB password.

@host.hostgroup

The host group of the host.

host_enc['parameters']

Returns a Ruby hash containing information on host parameters. For example, use host_enc['parameters']['lifecycle_environment'] to get the life cycle environment of a host.

@host.image_build?

Returns true if the host is provisioned using an image.

@host.interfaces

Contains an array of all available host interfaces including the primary interface. See Section A.9, “Parsing Arrays”.

@host.interfaces_with_identifier('IDs')

Returns array of interfaces with given identifier. You can pass an array of multiple identifiers as an input, for example @host.interfaces_with_identifier(['eth0', 'eth1']). See Section A.9, “Parsing Arrays”.

@host.ip

The IP address of the host.

@host.location

The location of the host.

@host.mac

The MAC address of the host.

@host.managed_interfaces

Returns an array of managed interfaces (excluding BMC and bonded interfaces). See Section A.9, “Parsing Arrays”.

@host.medium

The assigned operating system installation medium.

@host.name

The full name of the host.

@host.operatingsystem.family

The operating system family.

@host.operatingsystem.major

The major version number of the assigned operating system.

@host.operatingsystem.minor

The minor version number of the assigned operating system.

@host.operatingsystem.name

The assigned operating system name.

@host.operatingsystem.boot_files_uri(medium_provider)

Full path to the kernel and initrd, returns an array.

@host.os.medium_uri(@host)

The URI used for provisioning (path configured in installation media).

host_param('parameter_name')

Returns the value of the specified host parameter.

host_param_false?('parameter_name')

Returns false if the specified host parameter evaluates to false.

host_param_true?('parameter_name')

Returns true if the specified host parameter evaluates to true.

@host.primary_interface

Returns the primary interface of the host.

@host.provider

The compute resource provider.

@host.provision_interface

Returns the provisioning interface of the host. Returns an interface object.

@host.ptable

The partition table name.

@host.puppet_ca_server

The Puppet CA server the host must use.

@host.puppetmaster

The Puppet master the host must use.

@host.pxe_build?

Returns true if the host is provisioned using the network or PXE.

@host.shortname

The short name of the host.

@host.sp_ip

The IP address of the BMC interface.

@host.sp_mac

The MAC address of the BMC interface.

@host.sp_name

The name of the BMC interface.

@host.sp_subnet

The subnet of the BMC network.

@host.subnet.dhcp

Returns true if a DHCP proxy is configured for this host.

@host.subnet.dns_primary

The primary DNS server of the host.

@host.subnet.dns_secondary

The secondary DNS server of the host.

@host.subnet.gateway

The gateway of the host.

@host.subnet.mask

The subnet mask of the host.

@host.url_for_boot(:initrd)

Full path to the initrd image associated with this host. Not recommended, as it does not interpolate variables.

@host.url_for_boot(:kernel)

Full path to the kernel associated with this host. Not recommended, as it does not interpolate variables, prefer boot_files_uri.

@provisioning_type

Equals to 'host' or 'hostgroup' depending on type of provisioning.

@static

Returns true if the network configuration is static.

@template_name

Name of the template being rendered.

grub_pass

Returns the GRUB password wrapped in md5pass argument, that is --md5pass=#{@host.grub_pass}.

ks_console

Returns a string assembled using the port and the baud rate of the host which can be added to a kernel line. For example console=ttyS1,9600.

root_pass

Returns the root password configured for the system.

The majority of common Ruby methods can be applied on host-specific variables. For example, to extract the last segment of the host’s IP address, you can use:

<% @host.ip.split('.').last %>

A.7. Kickstart-Specific Variables

The following variables are designed to be used within kickstart provisioning templates.

Table A.3. Kickstart Specific Variables

NameDescription

@arch

The host architecture name, same as @host.architecture.name.

@dynamic

Returns true if the partition table being used is a %pre script (has the #Dynamic option as the first line of the table).

@epel

A command which will automatically install the correct version of the epel-release rpm. Use in a %post script.

@mediapath

The full kickstart line to provide the URL command.

@osver

The operating system major version number, same as @host.operatingsystem.major.

A.8. Conditional Statements

In your templates, you might perform different actions depending on which value exists. To achieve this, you can use conditional statements in your ERB syntax.

In the following example, the ERB syntax searches for a specific host name and returns an output depending on the value it finds:

Example input:

<% load_hosts().each_record do |host| -%>
<% if @host.name == "host1.example.com" -%>
<%      result="positive" -%>
<%  else -%>
<%      result="negative" -%>
<%  end -%>
<%= result -%>

Example rendering:

host1.example.com
positive

A.9. Parsing Arrays

While writing or modifying templates, you might encounter variables that return arrays. For example, host variables related to network interfaces, such as @host.interfaces or @host.bond_interfaces, return interface data grouped in an array. To extract a parameter value of a specific interface, use Ruby methods to parse the array.

Finding the Correct Method to Parse an Array

The following procedure is an example that you can use to find the relevant methods to parse arrays in your template. In this example, a report template is used, but the steps are applicable to other templates.

  1. To retrieve the NIC of a content host, in this example, using the @host.interfaces variable returns class values that you can then use to find methods to parse the array.

    Example input:

    <%= @host.interfaces -%>

    Example rendering:

    <Nic::Base::ActiveRecord_Associations_CollectionProxy:0x00007f734036fbe0>

  2. In the Create Template window, click the Help tab and search for the ActiveRecord_Associations_CollectionProxy and Nic::Base classes.
  3. For ActiveRecord_Associations_CollectionProxy, in the Allowed methods or members column, you can view the following methods to parse the array:

    [] each find_in_batches first map size to_a
  4. For Nic::Base, in the Allowed methods or members column, you can view the following method to parse the array:

    alias? attached_devices attached_devices_identifiers attached_to bond_options children_mac_addresses domain fqdn identifier inheriting_mac ip ip6 link mac managed? mode mtu nic_delay physical? primary provision shortname subnet subnet6 tag virtual? vlanid
  5. To iterate through an interface array, add the relevant methods to the ERB syntax:

    Example input:

    <% load_hosts().each_record do |host| -%>
    <%    host.interfaces.each do |iface| -%>
      iface.alias?: <%= iface.alias? %>
      iface.attached_to: <%= iface.attached_to %>
      iface.bond_options: <%= iface.bond_options %>
      iface.children_mac_addresses: <%= iface.children_mac_addresses %>
      iface.domain: <%= iface.domain %>
      iface.fqdn: <%= iface.fqdn %>
      iface.identifier: <%= iface.identifier %>
      iface.inheriting_mac: <%= iface.inheriting_mac %>
      iface.ip: <%= iface.ip %>
      iface.ip6: <%= iface.ip6 %>
      iface.link: <%= iface.link %>
      iface.mac: <%= iface.mac %>
      iface.managed?: <%= iface.managed? %>
      iface.mode: <%= iface.mode %>
      iface.mtu: <%= iface.mtu %>
      iface.physical?: <%= iface.physical? %>
      iface.primary: <%= iface.primary %>
      iface.provision: <%= iface.provision %>
      iface.shortname: <%= iface.shortname %>
      iface.subnet: <%= iface.subnet %>
      iface.subnet6: <%= iface.subnet6 %>
      iface.tag: <%= iface.tag %>
      iface.virtual?: <%= iface.virtual? %>
      iface.vlanid: <%= iface.vlanid %>
    <%- end -%>

    Example rendering:

    host1.example.com
      iface.alias?: false
      iface.attached_to:
      iface.bond_options:
      iface.children_mac_addresses: []
      iface.domain:
      iface.fqdn: host1.example.com
      iface.identifier: ens192
      iface.inheriting_mac: 00:50:56:8d:4c:cf
      iface.ip: 10.10.181.13
      iface.ip6:
      iface.link: true
      iface.mac: 00:50:56:8d:4c:cf
      iface.managed?: true
      iface.mode: balance-rr
      iface.mtu:
      iface.physical?: true
      iface.primary: true
      iface.provision: true
      iface.shortname: host1.example.com
      iface.subnet:
      iface.subnet6:
      iface.tag:
      iface.virtual?: false
      iface.vlanid:

A.10. Example Template Snippets

Checking if a Host Has Puppet and Puppetlabs Enabled

The following example checks if the host has the Puppet and Puppetlabs repositories enabled:

<%
pm_set = @host.puppetmaster.empty? ? false : true
puppet_enabled = pm_set || host_param_true?('force-puppet')
puppetlabs_enabled = host_param_true?('enable-puppetlabs-repo')
%>

Capturing Major and Minor Versions of a Host’s Operating System

The following example shows how to capture the minor and major version of the host’s operating system, which can be used for package related decisions:

<%
os_major = @host.operatingsystem.major.to_i
os_minor = @host.operatingsystem.minor.to_i
%>

<% if ((os_minor < 2) && (os_major < 14)) -%>
...
<% end -%>

Importing Snippets to a Template

The following example imports the subscription_manager_registration snippet to the template and indents it by four spaces:

<%= indent 4 do
snippet 'subscription_manager_registration'
end %>

Conditionally Importing a Kickstart Snippet

The following example imports the kickstart_networking_setup snippet if the host’s subnet has the DHCP boot mode enabled:

<% subnet = @host.subnet %>
<% if subnet.respond_to?(:dhcp_boot_mode?) -%>
<%= snippet 'kickstart_networking_setup' %>
<% end -%>

Parsing Values from Host Custom Facts

You can use the host.facts variable to parse values from a host’s facts and custom facts.

In this example luks_stat is a custom fact that you can parse in the same manner as dmi::system::serial_number, which is a host fact:

'Serial': host.facts['dmi::system::serial_number'],
'Encrypted': host.facts['luks_stat'],

In this example, you can customize the Applicable Errata report template to parse for custom information about the kernel version of each host:

<%-     report_row(
          'Host': host.name,
          'Operating System': host.operatingsystem,
          'Kernel': host.facts['uname::release'],
          'Environment': host.lifecycle_environment,
          'Erratum': erratum.errata_id,
          'Type': erratum.errata_type,
          'Published': erratum.issued,
          'Applicable since': erratum.created_at,
          'Severity': erratum.severity,
          'Packages': erratum.package_names,
          'CVEs': erratum.cves,
          'Reboot suggested': erratum.reboot_suggested,
        ) -%>

Appendix B. Job Template Examples and Extensions

Use this section as a reference to help modify, customize, and extend your job templates to suit your requirements.

B.1. Customizing Job Templates

When creating a job template, you can include an existing template in the template editor field. This way you can combine templates, or create more specific templates from the general ones.

The following template combines default templates to install and start the httpd service on Red Hat Enterprise Linux systems:

<%= render_template 'Package Action - SSH Default', :action => 'install', :package => 'httpd' %>
<%= render_template 'Service Action - SSH Default', :action => 'start', :service_name => 'httpd' %>

The above template specifies parameter values for the rendered template directly. It is also possible to use the input() method to allow users to define input for the rendered template on job execution. For example, you can use the following syntax:

<%= render_template 'Package Action - SSH Default', :action => 'install', :package => input("package") %>

With the above template, you have to import the parameter definition from the rendered template. To do so, navigate to the Jobs tab, click Add Foreign Input Set, and select the rendered template from the Target template list. You can import all parameters or specify a comma separated list.

B.2. Default Job Template Categories

Job template categoryDescription

Packages

Templates for performing package related actions. Install, update, and remove actions are included by default.

Puppet

Templates for executing Puppet runs on target hosts.

Power

Templates for performing power related actions. Restart and shutdown actions are included by default.

Commands

Templates for executing custom commands on remote hosts.

Services

Templates for performing service related actions. Start, stop, restart, and status actions are included by default.

Katello

Templates for performing content related actions. These templates are used mainly from different parts of the Satellite web UI (for example bulk actions UI for content hosts), but can be used separately to perform operations such as errata installation.

B.3. Example restorecon Template

This example shows how to create a template called Run Command - restorecon that restores the default SELinux context for all files in the selected directory on target hosts.

  1. Navigate to Hosts > Job templates. Click New Job Template.
  2. Enter Run Command - restorecon in the Name field. Select Default to make the template available to all organizations. Add the following text to the template editor:

    restorecon -RvF <%= input("directory") %>

    The <%= input("directory") %> string is replaced by a user-defined directory during job invocation.

  3. On the Job tab, set Job category to Commands.
  4. Click Add Input to allow job customization. Enter directory to the Name field. The input name must match the value specified in the template editor.
  5. Click Required so that the command cannot be executed without the user specified parameter.
  6. Select User input from the Input type list. Enter a description to be shown during job invocation, for example Target directory for restorecon.
  7. Click Submit.

See Section B.5, “Executing a restorecon Template on Multiple Hosts” for information on how to execute a job based on this template.

B.4. Rendering a restorecon Template

This example shows how to create a template derived from the Run command - restorecon template created in Section B.3, “Example restorecon Template”. This template does not require user input on job execution, it will restore the SELinux context in all files under the /home/ directory on target hosts.

Create a new template as described in Section 10.14, “Setting up Job Templates”, and specify the following string in the template editor:

<%= render_template("Run Command - restorecon", :directory => "/home") %>

B.5. Executing a restorecon Template on Multiple Hosts

This example shows how to run a job based on the template created in Section B.3, “Example restorecon Template” on multiple hosts. The job restores the SELinux context in all files under the /home/ directory.

  1. Navigate to Hosts > All hosts and select target hosts. Select Schedule Remote Job from the Select Action list.
  2. In the Job invocation page, select the Commands job category and the Run Command - restorecon job template.
  3. Type /home in the directory field.
  4. Set Schedule to Execute now.
  5. Click Submit. You are taken to the Job invocation page where you can monitor the status of job execution.

B.6. Including Power Actions in Templates

This example shows how to set up a job template for performing power actions, such as reboot. This procedure prevents Satellite from interpreting the disconnect exception upon reboot as an error, and consequently, remote execution of the job works correctly.

Create a new template as described in Section 10.14, “Setting up Job Templates”, and specify the following string in the template editor:

<%= render_template("Power Action - SSH Default", :action => "restart") %>

Legal Notice

Copyright © 2023 Red Hat, Inc.
The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.
Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.
Red Hat, Red Hat Enterprise Linux, the Shadowman logo, the Red Hat logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.
Linux® is the registered trademark of Linus Torvalds in the United States and other countries.
Java® is a registered trademark of Oracle and/or its affiliates.
XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.
MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.
Node.js® is an official trademark of Joyent. Red Hat is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.
The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.
All other trademarks are the property of their respective owners.