public class ActiveMQJMSContext extends Object implements JMSContext
AUTO_ACKNOWLEDGE, CLIENT_ACKNOWLEDGE, DUPS_OK_ACKNOWLEDGE, SESSION_TRANSACTED
Constructor and Description |
---|
ActiveMQJMSContext(ActiveMQConnectionForContext connection,
int ackMode,
ThreadAwareContext threadAwareContext) |
ActiveMQJMSContext(ActiveMQConnectionForContext connection,
ThreadAwareContext threadAwareContext) |
Modifier and Type | Method and Description |
---|---|
void |
acknowledge()
Acknowledges all messages consumed by the JMSContext's session.
|
void |
close()
Closes the JMSContext
|
void |
commit()
Commits all messages done in this transaction and releases any locks
currently held.
|
QueueBrowser |
createBrowser(Queue queue)
Creates a
QueueBrowser object to peek at the messages on the
specified queue. |
QueueBrowser |
createBrowser(Queue queue,
String messageSelector)
Creates a
QueueBrowser object to peek at the messages on the
specified queue using a message selector. |
BytesMessage |
createBytesMessage()
Creates a
BytesMessage object. |
JMSConsumer |
createConsumer(Destination destination)
Creates a
JMSConsumer for the specified destination. |
JMSConsumer |
createConsumer(Destination destination,
String messageSelector)
Creates a
JMSConsumer for the specified destination, using a
message selector. |
JMSConsumer |
createConsumer(Destination destination,
String messageSelector,
boolean noLocal)
Creates a
JMSConsumer for the specified destination,
specifying a message selector and the noLocal parameter. |
JMSContext |
createContext(int sessionMode)
Creates a new
JMSContext with the specified session mode
using the same connection as this JMSContext and creating a
new session. |
JMSConsumer |
createDurableConsumer(Topic topic,
String name)
Creates an unshared durable subscription on the specified topic (if one
does not already exist) and creates a consumer on that durable
subscription.
|
JMSConsumer |
createDurableConsumer(Topic topic,
String name,
String messageSelector,
boolean noLocal)
Creates an unshared durable subscription on the specified topic (if one
does not already exist), specifying a message selector and the
noLocal parameter, and creates a consumer on that durable
subscription. |
MapMessage |
createMapMessage()
Creates a
MapMessage object. |
Message |
createMessage()
Creates a
Message object. |
ObjectMessage |
createObjectMessage()
Creates an
ObjectMessage object. |
ObjectMessage |
createObjectMessage(Serializable object)
Creates an initialized
ObjectMessage object. |
JMSProducer |
createProducer()
Creates a new
JMSProducer object which can be used to
configure and send messages |
Queue |
createQueue(String queueName)
Creates a
Queue object which encapsulates a specified
provider-specific queue name. |
JMSConsumer |
createSharedConsumer(Topic topic,
String sharedSubscriptionName)
Creates a shared non-durable subscription with the specified name on the
specified topic (if one does not already exist) and creates a consumer on
that subscription.
|
JMSConsumer |
createSharedConsumer(Topic topic,
String sharedSubscriptionName,
String messageSelector)
Creates a shared non-durable subscription with the specified name on the
specified topic (if one does not already exist) specifying a message selector,
and creates a consumer on that subscription.
|
JMSConsumer |
createSharedDurableConsumer(Topic topic,
String name)
Creates a shared durable subscription on the specified topic (if one
does not already exist), specifying a message selector,
and creates a consumer on that durable subscription.
|
JMSConsumer |
createSharedDurableConsumer(Topic topic,
String name,
String messageSelector)
Creates a shared durable subscription on the specified topic (if one
does not already exist), specifying a message selector,
and creates a consumer on that durable subscription.
|
StreamMessage |
createStreamMessage()
Creates a
StreamMessage object. |
TemporaryQueue |
createTemporaryQueue()
Creates a
TemporaryQueue object. |
TemporaryTopic |
createTemporaryTopic()
Creates a
TemporaryTopic object. |
TextMessage |
createTextMessage()
Creates a
TextMessage object. |
TextMessage |
createTextMessage(String text)
Creates an initialized
TextMessage object. |
Topic |
createTopic(String topicName)
Creates a
Topic object which encapsulates a specified
provider-specific topic name. |
boolean |
getAutoStart()
Returns whether the underlying connection used by this
JMSContext will be started automatically when a consumer is
created. |
String |
getClientID()
Gets the client identifier for the JMSContext's connection.
|
JMSContext |
getContext() |
ExceptionListener |
getExceptionListener()
Gets the
ExceptionListener object for the JMSContext's
connection. |
ConnectionMetaData |
getMetaData()
Gets the connection metadata for the JMSContext's connection.
|
Session |
getSession() |
int |
getSessionMode()
Returns the session mode of the JMSContext's session.
|
ThreadAwareContext |
getThreadAwareContext() |
boolean |
getTransacted()
Indicates whether the JMSContext's session is in transacted mode.
|
Session |
getUsedSession()
This is to be used on tests only.
|
XAResource |
getXAResource() |
void |
recover()
Stops message delivery in the JMSContext's session, and restarts message
delivery with the oldest unacknowledged message.
|
void |
rollback()
Rolls back any messages done in this transaction and releases any locks
currently held.
|
void |
setAutoStart(boolean autoStart)
Specifies whether the underlying connection used by this
JMSContext will be started automatically when a consumer is
created. |
void |
setClientID(String clientID)
Sets the client identifier for the JMSContext's connection.
|
void |
setExceptionListener(ExceptionListener listener)
Sets an exception listener for the JMSContext's connection.
|
void |
start()
Starts (or restarts) delivery of incoming messages by the JMSContext's
connection.
|
void |
stop()
Temporarily stops the delivery of incoming messages by the JMSContext's
connection.
|
void |
unsubscribe(String name)
Unsubscribes a durable subscription that has been created by a client.
|
public ActiveMQJMSContext(ActiveMQConnectionForContext connection, int ackMode, ThreadAwareContext threadAwareContext)
public ActiveMQJMSContext(ActiveMQConnectionForContext connection, ThreadAwareContext threadAwareContext)
public JMSContext getContext()
public Session getSession()
public XAResource getXAResource()
public JMSContext createContext(int sessionMode)
JMSContext
JMSContext
with the specified session mode
using the same connection as this JMSContext
and creating a
new session.
This method does not start the connection. If the connection has not
already been started then it will be automatically started when a
JMSConsumer
is created on any of the JMSContext
objects for that connection.
sessionMode
is set to
JMSContext.SESSION_TRANSACTED
then the session will use a
local transaction which may subsequently be committed or rolled back by
calling the JMSContext
's commit
or
rollback
methods.
sessionMode
is set to any of
JMSContext.CLIENT_ACKNOWLEDGE
,
JMSContext.AUTO_ACKNOWLEDGE
or
JMSContext.DUPS_OK_ACKNOWLEDGE
. then the session will be
non-transacted and messages received by this session will be acknowledged
according to the value of sessionMode
. For a definition of
the meaning of these acknowledgement modes see the links below.
This method must not be used by applications running in the Java EE web
or EJB containers because doing so would violate the restriction that
such an application must not attempt to create more than one active (not
closed) Session
object per connection. If this method is
called in a Java EE web or EJB container then a
JMSRuntimeException
will be thrown.
createContext
in interface JMSContext
sessionMode
- indicates which of four possible session modes will be used.
The permitted values are
JMSContext.SESSION_TRANSACTED
,
JMSContext.CLIENT_ACKNOWLEDGE
,
JMSContext.AUTO_ACKNOWLEDGE
and
JMSContext.DUPS_OK_ACKNOWLEDGE
.JMSContext.SESSION_TRANSACTED
,
JMSContext.CLIENT_ACKNOWLEDGE
,
JMSContext.AUTO_ACKNOWLEDGE
,
JMSContext.DUPS_OK_ACKNOWLEDGE
,
ConnectionFactory.createContext()
,
ConnectionFactory.createContext(int)
,
ConnectionFactory.createContext(java.lang.String,
java.lang.String)
,
ConnectionFactory.createContext(java.lang.String,
java.lang.String, int)
,
JMSContext.createContext(int)
public JMSProducer createProducer()
JMSContext
JMSProducer
object which can be used to
configure and send messagescreateProducer
in interface JMSContext
JMSProducer
objectJMSProducer
public String getClientID()
JMSContext
This value is specific to the JMS provider. It is either preconfigured by
an administrator in a ConnectionFactory
object or assigned
dynamically by the application by calling the setClientID
method.
getClientID
in interface JMSContext
public void setClientID(String clientID)
JMSContext
The preferred way to assign a JMS client's client identifier is for it to
be configured in a client-specific ConnectionFactory
object
and transparently assigned to the Connection
object it
creates.
Alternatively, a client can set the client identifier for the
MessageContext's connection using a provider-specific value. The facility
to set its client identifier explicitly is not a mechanism for overriding
the identifier that has been administratively configured. It is provided
for the case where no administratively specified identifier exists. If
one does exist, an attempt to change it by setting it must throw an
IllegalStateRuntimeException
. If a client sets the client
identifier explicitly, it must do so immediately after it creates the
JMSContext and before any other action on the JMSContext is taken. After
this point, setting the client identifier is a programming error that
should throw an IllegalStateRuntimeException
.
The purpose of the client identifier is to associate the JMSContext's connection and its objects with a state maintained on behalf of the client by a provider. The only such state identified by the JMS API is that required to support durable subscriptions.
If another connection with the same clientID
is already
running when this method is called, the JMS provider should detect the
duplicate ID and throw an InvalidClientIDException
.
This method must not be used in a Java EE web or EJB application. Doing
so may cause a JMSRuntimeException
to be thrown though this
is not guaranteed.
This method must not be used if the JMSContext
is
container-managed (injected). Doing so will cause a
IllegalStateRuntimeException
to be thrown.
setClientID
in interface JMSContext
clientID
- the unique client identifierpublic ConnectionMetaData getMetaData()
JMSContext
getMetaData
in interface JMSContext
ConnectionMetaData
public ExceptionListener getExceptionListener()
JMSContext
ExceptionListener
object for the JMSContext's
connection. Not every Connection
has an
ExceptionListener
associated with it.getExceptionListener
in interface JMSContext
ExceptionListener
for the JMSContext's
connection, or null if no ExceptionListener
is
associated with that connection.Connection.setExceptionListener(javax.jms.ExceptionListener)
public void setExceptionListener(ExceptionListener listener)
JMSContext
If a JMS provider detects a serious problem with a connection, it informs
the connection's ExceptionListener
, if one has been
registered. It does this by calling the listener's
onException
method, passing it a JMSRuntimeException
object describing the problem.
An exception listener allows a client to be notified of a problem asynchronously. Some connections only consume messages, so they would have no other way to learn their connection has failed.
A connection serializes execution of its ExceptionListener
.
A JMS provider should attempt to resolve connection problems itself before it notifies the client of them.
This method must not be used in a Java EE web or EJB application. Doing
so may cause a JMSRuntimeException
to be thrown though this
is not guaranteed.
This method must not be used if the JMSContext
is
container-managed (injected). Doing so will cause a
IllegalStateRuntimeException
to be thrown.
setExceptionListener
in interface JMSContext
listener
- the exception listenerpublic void start()
JMSContext
start
on a connection that has already
been started is ignored.
This method must not be used if the JMSContext
is
container-managed (injected). Doing so will cause a
IllegalStateRuntimeException
to be thrown.
start
in interface JMSContext
JMSContext.stop()
public void stop()
JMSContext
start
method. When the connection is stopped, delivery to all the connection's
message consumers is inhibited: synchronous receives block, and messages
are not delivered to message listeners.
This call blocks until receives and/or message listeners in progress have completed.
Stopping a connection has no effect on its ability to send messages. A
call to stop
on a connection that has already been stopped
is ignored.
A call to stop
must not return until delivery of messages
has paused. This means that a client can rely on the fact that none of
its message listeners will be called and that all threads of control
waiting for receive
calls to return will not return with a
message until the connection is restarted. The receive timers for a
stopped connection continue to advance, so receives may time out while
the connection is stopped.
If message listeners are running when stop
is invoked, the
stop
call must wait until all of them have returned before
it may return. While these message listeners are completing, they must
have the full services of the connection available to them.
A message listener must not attempt to stop its own JMSContext as this would lead to deadlock. The JMS provider must detect this and throw a IllegalStateRuntimeException
For the avoidance of doubt, if an exception listener for the JMSContext's
connection is running when stop
is invoked, there is no
requirement for the stop
call to wait until the exception
listener has returned before it may return.
This method must not be used in a Java EE web or EJB application. Doing
so may cause a JMSRuntimeException
to be thrown though this
is not guaranteed.
This method must not be used if the JMSContext
is
container-managed (injected). Doing so will cause a
IllegalStateRuntimeException
to be thrown.
stop
in interface JMSContext
JMSContext.start()
public void setAutoStart(boolean autoStart)
JMSContext
JMSContext
will be started automatically when a consumer is
created. This is the default behaviour, and it may be disabled by calling
this method with a value of false
.
This method does not itself either start or stop the connection.
This method must not be used if the JMSContext
is
container-managed (injected). Doing so will cause a
IllegalStateRuntimeException
to be thrown.
setAutoStart
in interface JMSContext
autoStart
- Whether the underlying connection used by this
JMSContext
will be automatically started when a
consumer is created.JMSContext.getAutoStart()
public boolean getAutoStart()
JMSContext
JMSContext
will be started automatically when a consumer is
created.getAutoStart
in interface JMSContext
JMSContext
will be started automatically when a
consumer is created.JMSContext.setAutoStart(boolean)
public void close()
JMSContext
This closes the underlying session and any underlying producers and consumers. If there are no other active (not closed) JMSContext objects using the underlying connection then this method also closes the underlying connection.
Since a provider typically allocates significant resources outside the JVM on behalf of a connection, clients should close these resources when they are not needed. Relying on garbage collection to eventually reclaim these resources may not be timely enough.
Closing a connection causes all temporary destinations to be deleted.
When this method is invoked, it should not return until message
processing has been shut down in an orderly fashion. This means that all
message listeners that may have been running have returned, and that all
pending receives have returned. A close terminates all pending message
receives on the connection's sessions' consumers. The receives may return
with a message or with null, depending on whether there was a message
available at the time of the close. If one or more of the connection's
sessions' message listeners is processing a message at the time when
connection close
is invoked, all the facilities of the
connection and its sessions must remain available to those listeners
until they return control to the JMS provider.
This method must not return until any incomplete asynchronous send operations for this JMSContext have been completed and any CompletionListener callbacks have returned. Incomplete sends should be allowed to complete normally unless an error occurs.
For the avoidance of doubt, if an exception listener for the JMSContext's
connection is running when close
is invoked, there is no
requirement for the close
call to wait until the exception
listener has returned before it may return.
Closing a connection causes any of its sessions' transactions in progress
to be rolled back. In the case where a session's work is coordinated by
an external transaction manager, a session's commit
and
rollback
methods are not used and the result of a closed
session's work is determined later by the transaction manager.
Closing a connection does NOT force an acknowledgment of client-acknowledged sessions.
Invoking the acknowledge
method of a received message from a
closed connection's session must throw an
IllegalStateRuntimeException
. Closing a closed connection must NOT
throw an exception.
A MessageListener must not attempt to close its own JMSContext as this would lead to deadlock. The JMS provider must detect this and throw a IllegalStateRuntimeException.
A CompletionListener callback method must not call close on its own JMSContext. Doing so will cause an IllegalStateRuntimeException to be thrown.
This method must not be used if the JMSContext
is
container-managed (injected). Doing so will cause a
IllegalStateRuntimeException
to be thrown.
close
in interface AutoCloseable
close
in interface JMSContext
public BytesMessage createBytesMessage()
JMSContext
BytesMessage
object. A BytesMessage
object is used to send a message containing a stream of uninterpreted
bytes.createBytesMessage
in interface JMSContext
public MapMessage createMapMessage()
JMSContext
MapMessage
object. A MapMessage
object is used to send a self-defining set of name-value pairs, where
names are String
objects and values are primitive values in
the Java programming language.
The message object returned may be sent using any Session
or
JMSContext
. It is not restricted to being sent using the
JMSContext
used to create it.
The message object returned may be optimised for use with the JMS provider used to create it. However it can be sent using any JMS provider, not just the JMS provider used to create it.
createMapMessage
in interface JMSContext
public Message createMessage()
JMSContext
Message
object. The Message
interface
is the root interface of all JMS messages. A Message
object
holds all the standard message header information. It can be sent when a
message containing only header information is sufficient.
The message object returned may be sent using any Session
or
JMSContext
. It is not restricted to being sent using the
JMSContext
used to create it.
The message object returned may be optimised for use with the JMS provider used to create it. However it can be sent using any JMS provider, not just the JMS provider used to create it.
createMessage
in interface JMSContext
public ObjectMessage createObjectMessage()
JMSContext
ObjectMessage
object. An
ObjectMessage
object is used to send a message that contains
a serializable Java object.
The message object returned may be sent using any Session
or
JMSContext
. It is not restricted to being sent using the
JMSContext
used to create it.
The message object returned may be optimised for use with the JMS provider used to create it. However it can be sent using any JMS provider, not just the JMS provider used to create it.
createObjectMessage
in interface JMSContext
public ObjectMessage createObjectMessage(Serializable object)
JMSContext
ObjectMessage
object. An
ObjectMessage
object is used to send a message that contains
a serializable Java object.
The message object returned may be sent using any Session
or
JMSContext
. It is not restricted to being sent using the
JMSContext
used to create it.
The message object returned may be optimised for use with the JMS provider used to create it. However it can be sent using any JMS provider, not just the JMS provider used to create it.
createObjectMessage
in interface JMSContext
object
- the object to use to initialize this messagepublic StreamMessage createStreamMessage()
JMSContext
StreamMessage
object. A StreamMessage
object is used to send a self-defining stream of primitive values in the
Java programming language.
The message object returned may be sent using any Session
or
JMSContext
. It is not restricted to being sent using the
JMSContext
used to create it.
The message object returned may be optimised for use with the JMS provider used to create it. However it can be sent using any JMS provider, not just the JMS provider used to create it.
createStreamMessage
in interface JMSContext
public TextMessage createTextMessage()
JMSContext
TextMessage
object. A TextMessage
object is used to send a message containing a String
object.
The message object returned may be sent using any Session
or
JMSContext
. It is not restricted to being sent using the
JMSContext
used to create it.
The message object returned may be optimised for use with the JMS provider used to create it. However it can be sent using any JMS provider, not just the JMS provider used to create it.
createTextMessage
in interface JMSContext
public TextMessage createTextMessage(String text)
JMSContext
TextMessage
object. A
TextMessage
object is used to send a message containing a
String
.
The message object returned may be sent using any Session
or
JMSContext
. It is not restricted to being sent using the
JMSContext
used to create it.
The message object returned may be optimised for use with the JMS provider used to create it. However it can be sent using any JMS provider, not just the JMS provider used to create it.
createTextMessage
in interface JMSContext
text
- the string used to initialize this messagepublic boolean getTransacted()
JMSContext
getTransacted
in interface JMSContext
public int getSessionMode()
JMSContext
If a session mode was not specified when the JMSContext was created a value of JMSContext.AUTO_ACKNOWLEDGE will be returned.
getSessionMode
in interface JMSContext
Connection.createSession(boolean, int)
public void commit()
JMSContext
This method must not return until any incomplete asynchronous send operations for this JMSContext have been completed and any CompletionListener callbacks have returned. Incomplete sends should be allowed to complete normally unless an error occurs.
A CompletionListener callback method must not call commit on its own JMSContext. Doing so will cause an IllegalStateRuntimeException to be thrown.
This method must not be used if the JMSContext
is
container-managed (injected). Doing so will cause a
IllegalStateRuntimeException
to be thrown.
commit
in interface JMSContext
public void rollback()
JMSContext
This method must not return until any incomplete asynchronous send operations for this JMSContext have been completed and any CompletionListener callbacks have returned. Incomplete sends should be allowed to complete normally unless an error occurs.
A CompletionListener callback method must not call rollback on its own JMSContext. Doing so will cause an IllegalStateRuntimeException to be thrown.
This method must not be used if the JMSContext
is
container-managed (injected). Doing so will cause a
IllegalStateRuntimeException
to be thrown.
rollback
in interface JMSContext
public void recover()
JMSContext
All consumers deliver messages in a serial order. Acknowledging a received message automatically acknowledges all messages that have been delivered to the client.
Restarting a session causes it to take the following actions:
This method must not be used if the JMSContext
is
container-managed (injected). Doing so will cause a
IllegalStateRuntimeException
to be thrown.
recover
in interface JMSContext
public JMSConsumer createConsumer(Destination destination)
JMSContext
JMSConsumer
for the specified destination.
A client uses a JMSConsumer
object to receive messages that
have been sent to a destination.
createConsumer
in interface JMSContext
destination
- the Destination
to access.public JMSConsumer createConsumer(Destination destination, String messageSelector)
JMSContext
JMSConsumer
for the specified destination, using a
message selector.
A client uses a JMSConsumer
object to receive messages that
have been sent to a destination.
createConsumer
in interface JMSContext
destination
- the Destination
to accessmessageSelector
- only messages with properties matching the message selector
expression are delivered. A value of null or an empty string
indicates that there is no message selector for the
JMSConsumer
.public JMSConsumer createConsumer(Destination destination, String messageSelector, boolean noLocal)
JMSContext
JMSConsumer
for the specified destination,
specifying a message selector and the noLocal
parameter.
A client uses a JMSConsumer
object to receive messages that
have been sent to a destination.
The noLocal
argument is for use when the destination is a
topic and the JMSContext's connection is also being used to publish
messages to that topic. If noLocal
is set to true then the
JMSConsumer
will not receive messages published to the topic
by its own connection. The default value of this argument is false. If
the destination is a queue then the effect of setting
noLocal
to true is not specified.
createConsumer
in interface JMSContext
destination
- the Destination
to accessmessageSelector
- only messages with properties matching the message selector
expression are delivered. A value of null or an empty string
indicates that there is no message selector for the
JMSConsumer
.noLocal
- if true, and the destination is a topic, then the
JMSConsumer
will not receive messages published
to the topic by its own connectionpublic Queue createQueue(String queueName)
JMSContext
Queue
object which encapsulates a specified
provider-specific queue name.
The use of provider-specific queue names in an application may render the
application non-portable. Portable applications are recommended to not
use this method but instead look up an administratively-defined
Queue
object using JNDI.
Note that this method simply creates an object that encapsulates the name
of a queue. It does not create the physical queue in the JMS provider.
JMS does not provide a method to create the physical queue, since this
would be specific to a given JMS provider. Creating a physical queue is
provider-specific and is typically an administrative task performed by an
administrator, though some providers may create them automatically when
needed. The one exception to this is the creation of a temporary queue,
which is done using the createTemporaryQueue
method.
createQueue
in interface JMSContext
queueName
- A provider-specific queue namepublic Topic createTopic(String topicName)
JMSContext
Topic
object which encapsulates a specified
provider-specific topic name.
The use of provider-specific topic names in an application may render the
application non-portable. Portable applications are recommended to not
use this method but instead look up an administratively-defined
Topic
object using JNDI.
Note that this method simply creates an object that encapsulates the name
of a topic. It does not create the physical topic in the JMS provider.
JMS does not provide a method to create the physical topic, since this
would be specific to a given JMS provider. Creating a physical topic is
provider-specific and is typically an administrative task performed by an
administrator, though some providers may create them automatically when
needed. The one exception to this is the creation of a temporary topic,
which is done using the createTemporaryTopic
method.
createTopic
in interface JMSContext
topicName
- A provider-specific topic namepublic JMSConsumer createDurableConsumer(Topic topic, String name)
JMSContext
noLocal
value of false
.
A durable subscription is used by an application which needs to receive all the messages published on a topic, including the ones published when there is no active consumer associated with it. The JMS provider retains a record of this durable subscription and ensures that all messages from the topic's publishers are retained until they are delivered to, and acknowledged by, a consumer on this durable subscription or until they have expired.
A durable subscription will continue to accumulate messages until it is
deleted using the unsubscribe
method.
This method may only be used with unshared durable subscriptions. Any
durable subscription created using this method will be unshared. This
means that only one active (i.e. not closed) consumer on the subscription
may exist at a time. The term "consumer" here means a
TopicSubscriber
, MessageConsumer
or JMSConsumer
object in any client.
An unshared durable subscription is identified by a name specified by the client and by the client identifier, which must be set. An application which subsequently wishes to create a consumer on that unshared durable subscription must use the same client identifier.
If an unshared durable subscription already exists with the same name and
client identifier, and the same topic, message selector and
noLocal
value has been specified, and there is no consumer
already active (i.e. not closed) on the durable subscription then
this method creates a JMSConsumer
on the existing durable subscription.
If an unshared durable subscription already exists with the same name and
client identifier, and there is a consumer already active (i.e. not
closed) on the durable subscription, then a JMSRuntimeException
will be
thrown.
If an unshared durable subscription already exists with the same name and
client identifier but a different topic, message selector or
noLocal
value has been specified, and there is no consumer
already active (i.e. not closed) on the durable subscription then this is
equivalent to unsubscribing (deleting) the old one and creating a new
one.
A shared durable subscription and an unshared durable subscription may
not have the same name and client identifier. If a shared durable
subscription already exists with the same name and client identifier then
a JMSRuntimeException
is thrown.
There is no restriction on durable subscriptions and shared non-durable subscriptions having the same name and clientId. Such subscriptions would be completely separate.
createDurableConsumer
in interface JMSContext
topic
- the non-temporary Topic
to subscribe toname
- the name used to identify this subscriptionpublic JMSConsumer createDurableConsumer(Topic topic, String name, String messageSelector, boolean noLocal)
JMSContext
noLocal
parameter, and creates a consumer on that durable
subscription.
A durable subscription is used by an application which needs to receive all the messages published on a topic, including the ones published when there is no active consumer associated with it. The JMS provider retains a record of this durable subscription and ensures that all messages from the topic's publishers are retained until they are delivered to, and acknowledged by, a consumer on this durable subscription or until they have expired.
A durable subscription will continue to accumulate messages until it is
deleted using the unsubscribe
method.
This method may only be used with unshared durable subscriptions. Any
durable subscription created using this method will be unshared. This
means that only one active (i.e. not closed) consumer on the subscription
may exist at a time. The term "consumer" here means a
TopicSubscriber
, MessageConsumer
or JMSConsumer
object in any client.
An unshared durable subscription is identified by a name specified by the client and by the client identifier, which must be set. An application which subsequently wishes to create a consumer on that unshared durable subscription must use the same client identifier.
If an unshared durable subscription already exists with the same name and
client identifier, and the same topic, message selector and
noLocal
value has been specified, and there is no consumer
already active (i.e. not closed) on the durable subscription then
this method creates a JMSConsumer
on the existing durable subscription.
If an unshared durable subscription already exists with the same name and
client identifier, and there is a consumer already active (i.e. not
closed) on the durable subscription, then a JMSRuntimeException
will be
thrown.
If an unshared durable subscription already exists with the same name and
client identifier but a different topic, message selector or
noLocal
value has been specified, and there is no consumer
already active (i.e. not closed) on the durable subscription then this is
equivalent to unsubscribing (deleting) the old one and creating a new
one.
If noLocal
is set to true then any messages published to the topic
using this JMSContext
's connection, or any other connection with the same client
identifier, will not be added to the durable subscription.
A shared durable subscription and an unshared durable subscription may
not have the same name and client identifier. If a shared durable
subscription already exists with the same name and client identifier then
a JMSRuntimeException
is thrown.
There is no restriction on durable subscriptions and shared non-durable subscriptions having the same name and clientId. Such subscriptions would be completely separate.
This method is identical to the corresponding
createDurableSubscriber
method except that it returns a
MessageConsumer
rather than a TopicSubscriber
to
represent the consumer.
createDurableConsumer
in interface JMSContext
topic
- the non-temporary Topic
to subscribe toname
- the name used to identify this subscriptionmessageSelector
- only messages with properties matching the message selector
expression are added to the durable subscription. A value of
null or an empty string indicates that there is no message
selector for the durable subscription.noLocal
- if true then any messages published to the topic using this
session's connection, or any other connection with the same
client identifier, will not be added to the durable
subscription.public JMSConsumer createSharedDurableConsumer(Topic topic, String name)
JMSContext
A durable subscription is used by an application which needs to receive all the messages published on a topic, including the ones published when there is no active consumer associated with it. The JMS provider retains a record of this durable subscription and ensures that all messages from the topic's publishers are retained until they are delivered to, and acknowledged by, a consumer on this durable subscription or until they have expired.
A durable subscription will continue to accumulate messages until it is
deleted using the unsubscribe
method.
This method may only be used with shared durable subscriptions. Any
durable subscription created using this method will be shared. This means
that multiple active (i.e. not closed) consumers on the subscription may
exist at the same time. The term "consumer" here means a
MessageConsumer
or JMSConsumer
object in any client.
A shared durable subscription is identified by a name specified by the client and by the client identifier (which may be unset). An application which subsequently wishes to create a consumer on that shared durable subscription must use the same client identifier.
If a shared durable subscription already exists with the same name and
client identifier (if set), and the same topic and message selector
has been specified, then this method creates a
JMSConsumer
on the existing shared durable subscription.
If a shared durable subscription already exists with the same name and client identifier (if set) but a different topic or message selector has been specified, and there is no consumer already active (i.e. not closed) on the durable subscription then this is equivalent to unsubscribing (deleting) the old one and creating a new one.
If a shared durable subscription already exists with the same name and
client identifier (if set) but a different topic or message selector
has been specified, and there is a consumer already
active (i.e. not closed) on the durable subscription, then a
JMSRuntimeException
will be thrown.
A shared durable subscription and an unshared durable subscription may
not have the same name and client identifier (if set). If an unshared
durable subscription already exists with the same name and client
identifier (if set) then a JMSRuntimeException
is thrown.
If a message selector is specified then only messages with properties matching the message selector expression will be added to the subscription.
There is no restriction on durable subscriptions and shared non-durable subscriptions having the same name and clientId (which may be unset). Such subscriptions would be completely separate.
createSharedDurableConsumer
in interface JMSContext
topic
- the non-temporary Topic
to subscribe toname
- the name used to identify this subscriptionpublic JMSConsumer createSharedDurableConsumer(Topic topic, String name, String messageSelector)
JMSContext
A durable subscription is used by an application which needs to receive all the messages published on a topic, including the ones published when there is no active consumer associated with it. The JMS provider retains a record of this durable subscription and ensures that all messages from the topic's publishers are retained until they are delivered to, and acknowledged by, a consumer on this durable subscription or until they have expired.
A durable subscription will continue to accumulate messages until it is
deleted using the unsubscribe
method.
This method may only be used with shared durable subscriptions. Any
durable subscription created using this method will be shared. This means
that multiple active (i.e. not closed) consumers on the subscription may
exist at the same time. The term "consumer" here means a
MessageConsumer
or JMSConsumer
object in any client.
A shared durable subscription is identified by a name specified by the client and by the client identifier (which may be unset). An application which subsequently wishes to create a consumer on that shared durable subscription must use the same client identifier.
If a shared durable subscription already exists with the same name and
client identifier (if set), and the same topic and message selector have
been specified, then this method creates a
JMSConsumer
on the existing shared durable subscription.
If a shared durable subscription already exists with the same name and client identifier (if set), but a different topic or message selector has been specified, and there is no consumer already active (i.e. not closed) on the durable subscription then this is equivalent to unsubscribing (deleting) the old one and creating a new one.
If a shared durable subscription already exists with the same name and
client identifier (if set) but a different topic or message selector
has been specified, and there is a consumer already
active (i.e. not closed) on the durable subscription, then a
JMSRuntimeException
will be thrown.
A shared durable subscription and an unshared durable subscription may
not have the same name and client identifier (if set). If an unshared
durable subscription already exists with the same name and client
identifier (if set) then a JMSRuntimeException
is thrown.
There is no restriction on durable subscriptions and shared non-durable subscriptions having the same name and clientId (which may be unset). Such subscriptions would be completely separate.
createSharedDurableConsumer
in interface JMSContext
topic
- the non-temporary Topic
to subscribe toname
- the name used to identify this subscriptionmessageSelector
- only messages with properties matching the message selector
expression are added to the durable subscription. A value of
null or an empty string indicates that there is no message
selector for the durable subscription.public JMSConsumer createSharedConsumer(Topic topic, String sharedSubscriptionName)
JMSContext
If a shared non-durable subscription already exists with the same name
and client identifier (if set), and the same topic and message selector
has been specified, then this method creates a
JMSConsumer
on the existing subscription.
A non-durable shared subscription is used by a client which needs to be
able to share the work of receiving messages from a topic subscription
amongst multiple consumers. A non-durable shared subscription may
therefore have more than one consumer. Each message from the subscription
will be delivered to only one of the consumers on that subscription. Such
a subscription is not persisted and will be deleted (together with any
undelivered messages associated with it) when there are no consumers on
it. The term "consumer" here means a MessageConsumer
or
JMSConsumer
object in any client.
A shared non-durable subscription is identified by a name specified by the client and by the client identifier (which may be unset). An application which subsequently wishes to create a consumer on that shared non-durable subscription must use the same client identifier.
If a shared non-durable subscription already exists with the same name
and client identifier (if set) but a different topic or message selector
value has been specified, and there is a consumer already
active (i.e. not closed) on the subscription, then a JMSRuntimeException
will be thrown.
There is no restriction on durable subscriptions and shared non-durable subscriptions having the same name and clientId (which may be unset). Such subscriptions would be completely separate.
createSharedConsumer
in interface JMSContext
topic
- the Topic
to subscribe tosharedSubscriptionName
- the name used to identify the shared non-durable subscriptionpublic JMSConsumer createSharedConsumer(Topic topic, String sharedSubscriptionName, String messageSelector)
JMSContext
If a shared non-durable subscription already exists with the same name
and client identifier (if set), and the same topic and message selector
has been specified, then this method creates a
JMSConsumer
on the existing subscription.
A non-durable shared subscription is used by a client which needs to be
able to share the work of receiving messages from a topic subscription
amongst multiple consumers. A non-durable shared subscription may
therefore have more than one consumer. Each message from the subscription
will be delivered to only one of the consumers on that subscription. Such
a subscription is not persisted and will be deleted (together with any
undelivered messages associated with it) when there are no consumers on
it. The term "consumer" here means a MessageConsumer
or
JMSConsumer
object in any client.
A shared non-durable subscription is identified by a name specified by the client and by the client identifier (which may be unset). An application which subsequently wishes to create a consumer on that shared non-durable subscription must use the same client identifier.
If a shared non-durable subscription already exists with the same name
and client identifier (if set) but a different topic or message selector
has been specified, and there is a consumer already
active (i.e. not closed) on the subscription, then a JMSRuntimeException
will be thrown.
There is no restriction on durable subscriptions and shared non-durable subscriptions having the same name and clientId (which may be unset). Such subscriptions would be completely separate.
createSharedConsumer
in interface JMSContext
topic
- the Topic
to subscribe tosharedSubscriptionName
- the name used to identify the shared non-durable subscriptionmessageSelector
- only messages with properties matching the message selector
expression are added to the shared non-durable subscription. A
value of null or an empty string indicates that there is no
message selector for the shared non-durable subscription.public QueueBrowser createBrowser(Queue queue)
JMSContext
QueueBrowser
object to peek at the messages on the
specified queue.createBrowser
in interface JMSContext
queue
- the queue
to accesspublic QueueBrowser createBrowser(Queue queue, String messageSelector)
JMSContext
QueueBrowser
object to peek at the messages on the
specified queue using a message selector.createBrowser
in interface JMSContext
queue
- the queue
to accessmessageSelector
- only messages with properties matching the message selector
expression are delivered. A value of null or an empty string
indicates that there is no message selector for the message
consumer.public TemporaryQueue createTemporaryQueue()
JMSContext
TemporaryQueue
object. Its lifetime will be that
of the JMSContext's Connection
unless it is deleted earlier.createTemporaryQueue
in interface JMSContext
public TemporaryTopic createTemporaryTopic()
JMSContext
TemporaryTopic
object. Its lifetime will be that
of the JMSContext's Connection
unless it is deleted earlier.createTemporaryTopic
in interface JMSContext
public void unsubscribe(String name)
JMSContext
This method deletes the state being maintained on behalf of the subscriber by its provider.
A durable subscription is identified by a name specified by the client and by the client identifier if set. If the client identifier was set when the durable subscription was created then a client which subsequently wishes to use this method to delete a durable subscription must use the same client identifier.
It is erroneous for a client to delete a durable subscription while there is an active (not closed) consumer on that subscription, or while a consumed message is part of a pending transaction or has not been acknowledged in the session.
If the active consumer is represented by a JMSConsumer
then
calling close
on either that object or the
JMSContext
used to create it will render the consumer
inactive and allow the subscription to be deleted.
If the active consumer was created by calling
setMessageListener
on the JMSContext
then
calling close
on the JMSContext
will render the
consumer inactive and allow the subscription to be deleted.
If the active consumer is represented by a MessageConsumer
or TopicSubscriber
then calling close
on that
object or on the Session
or Connection
used to
create it will render the consumer inactive and allow the subscription to
be deleted.
unsubscribe
in interface JMSContext
name
- the name used to identify this subscriptionpublic void acknowledge()
JMSContext
This method is for use when the session has an acknowledgement mode of CLIENT_ACKNOWLEDGE. If the session is transacted or has an acknowledgement mode of AUTO_ACKNOWLEDGE or DUPS_OK_ACKNOWLEDGE calling this method has no effect.
This method has identical behaviour to the acknowledge
method on Message
. A client may individually acknowledge
each message as it is consumed, or it may choose to acknowledge messages
as an application-defined group. In both cases it makes no difference
which of these two methods is used.
Messages that have been received but not acknowledged may be redelivered.
This method must not be used if the JMSContext
is
container-managed (injected). Doing so will cause a
IllegalStateRuntimeException
to be thrown.
acknowledge
in interface JMSContext
Session.CLIENT_ACKNOWLEDGE
,
Message.acknowledge()
public Session getUsedSession()
public ThreadAwareContext getThreadAwareContext()
Copyright © 2017 JBoss by Red Hat. All rights reserved.