urn:infinispan:config:10.1

Defines the configuration for Infinispan, for the cache manager configuration, for the default cache, and for named caches.

jgroups?

Defines JGroups stacks.

Defines JGroups transport stacks.

Name	Type	Default	Description
transport	string	org.infinispan.remoting.transport.jgroups.JGroupsTransport	Class that represents a network transport. Must implement org.infinispan.remoting.transport.Transport.

stack-file*

Defines an individual JGroups stack, pointing to the file containing its definition.

Name	Type	Default	Description
name	string		Name of the stack, to be referenced by transport's stack attribute.
path	string		Path of JGroups configuration file containing stack definition.

stack*

Name	Type	Default	Description
name	string		Name of the stack, to be referenced by transport's stack attribute.
extends	string		The base stack to extend.

remote-sites?

Defines the relay configuration.

Name	Type	Default	Description
default-stack	string

remote-site

Name	Type	Default	Description
name	string
stack	string

ABP

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
resend_interval	string	Interval (in ms) at which a sent msg is resent
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

ASYM_ENCRYPT

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
asym_algorithm	string	Cipher engine transformation for asymmetric algorithm. Default is RSA
asym_keylength	string	Initial public/private key length. Default is 2048
change_key_on_coord_leave	string	Change the secret group key when the coordinator changes. If enabled, this will take place even if change_key_on_leave is disabled.
change_key_on_leave	string	When a node leaves, change the secret group key, preventing old members from eavesdropping
cipher_pool_size	string	Number of ciphers in the pool to parallelize encrypt and decrypt requests
encrypt_entire_message	string	If true, the entire message (including payload and headers) is encrypted, else only the payload
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
key_map_max_size	string	Max number of keys in key_map
level	string	logger level (see javadocs)
provider	string	Cryptographic Service Provider
sign_msgs	string	If true, all messages are digitally signed by adding an encrypted checksum of the encrypted message to the header. Ignored if encrypt_entire_message is false
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
sym_algorithm	string	Cipher engine transformation for symmetric algorithm. Default is AES
sym_keylength	string	Initial key length for matching symmetric algorithm. Default is 128
use_adler	string	When sign_msgs is true, by default CRC32 is used to create the checksum. If use_adler is true, Adler32 will be used
use_external_key_exchange	string	If true, a separate KeyExchange protocol (somewhere in the stack) is used to fetch the shared secret key. If false, the default (built-in) key exchange protocol will be used.

AUTH

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
auth_class	string	The fully qualified name of the class implementing the AuthToken interface
auth_coord	string	Do join or merge responses from the coordinator also need to be authenticated
auth_value	string
cert_alias	string
cert_password	string
cipher_type	string
client_password	string
client_principal_name	string
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
fixed_members_seperator	string
fixed_members_value	string
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
keystore_password	string
keystore_path	string
keystore_type	string
level	string	logger level (see javadocs)
match_ip_address	string
match_logical_name	string
match_string	string
service_principal_name	string
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
token_hash	string

BARRIER

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
flush_timeout	string	Max time (in ms) to wait until the threads which passed the barrier before it was closed have completed. If this time elapses, an exception will be thrown and state transfer will fail. 0 = wait forever
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
max_close_time	string	Max time barrier can be closed. Default is 60000 ms
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

BPING

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
async_discovery	string	If true then the discovery is done on a separate timer thread. Should be set to true when discovery is blocking and/or takes more than a few milliseconds
async_discovery_use_separate_thread_per_request	string	If enabled, use a separate thread for every discovery request. Can be used with or without async_discovery
bind_port	string	Port for discovery packets
break_on_coord_rsp	string	Return from the discovery phase as soon as we have 1 coordinator response
dest	string	Target address for broadcasts. This should be restricted to the local subnet, e.g. 192.168.1.255
discovery_rsp_expiry_time	string	Expiry time of discovery responses in ms
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
max_members_in_discovery_request	string	Max size of the member list shipped with a discovery request. If we have more, the mbrs field in the discovery request header is nulled and members return the entire membership, not individual members
max_rank_to_reply	string	The max rank of this member to respond to discovery requests, e.g. if max_rank_to_reply=2 in {A,B,C,D,E}, only A (rank 1) and B (rank 2) will reply. A value <= 0 means everybody will reply. This attribute is ignored if TP.use_ip_addrs is false.
num_discovery_runs	string	The number of times a discovery process is executed when finding initial members (https://issues.jboss.org/browse/JGRP-2317)
port_range	string	Sends discovery packets to ports 8555 to (8555+port_range)
return_entire_cache	string	Whether or not to return the entire logical-physical address cache mappings on a discovery request, or not.
send_cache_on_join	string	When a new node joins, and we have a static discovery protocol (TCPPING), then send the contents of the discovery cache to new and existing members if true (and we're the coord). Addresses JGRP-1903
stagger_timeout	string	If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
use_disk_cache	string	If a persistent disk cache (PDC) is present, combine the discovery results with the contents of the disk cache before returning the results

CENTRAL_EXECUTOR

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
bypass_bundling	string	bypasses message bundling if set
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
num_backups	string	Number of backups to the coordinator. Queue State gets replicated to these nodes as well
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

CENTRAL_LOCK

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
bypass_bundling	string	bypasses message bundling if set
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
lock_striping_size	string	Number of locks to be used for lock striping (for synchronized access to the server_lock entries)
num_backups	string	Number of backups to the coordinator. Server locks get replicated to these nodes as well
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
use_thread_id_for_lock_owner	string	By default, a lock owner is address:thread-id. If false, we only use the node's address. See https://issues.jboss.org/browse/JGRP-1886 for details

CENTRAL_LOCK2

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
bypass_bundling	string	bypasses message bundling if set
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
lock_reconciliation_timeout	string	Max time (im ms) to wait for lock info responses from members in a lock reconciliation phase
lock_striping_size	string	Number of locks to be used for lock striping (for synchronized access to the server_lock entries)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
use_thread_id_for_lock_owner	string	By default, a lock owner is address:thread-id. If false, we only use the node's address. See https://issues.jboss.org/browse/JGRP-1886 for details

CLEAR_FLAGS

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
oob	string	clear OOB flags
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

COMPRESS

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
compression_level	string	Compression level (from java.util.zip.Deflater) (0=no compression, 1=best speed, 9=best compression). Default is 9
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
min_size	string	Minimal payload size of a message (in bytes) for compression to kick in. Default is 500 bytes
pool_size	string	Number of inflaters/deflaters for concurrent processing. Default is 2
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

COUNTER

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
bypass_bundling	string	Bypasses message bundling if true
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
num_backups	string	Number of backup coordinators. Modifications are asynchronously sent to all backup coordinators
reconciliation_timeout	string	Number of milliseconds to wait for reconciliation responses from all current members
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
timeout	string	Request timeouts (in ms). If the timeout elapses, a Timeout (runtime) exception will be thrown

DAISYCHAIN

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
loopback	string	Loop back multicast messages
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

DELAY

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
constant_delay	string	Keep the delay constant. By default delay time randoms between 0 and upper bound
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
in_delay	string	Upper bound of number of milliseconds to delay passing a message up the stack (exclusive)
in_delay_nanos	string	Number of nanoseconds to delay passing a message up the stack
level	string	logger level (see javadocs)
out_delay	string	Upper bound number of milliseconds to delay passing a message down the stack (exclusive)
out_delay_nanos	string	Number of nanoseconds to delay passing a message down the stack
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

DELIVERY_TIME

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

DH_KEY_EXCHANGE

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
secret_key_algorithm	string	The type of secret key to be sent up the stack (converted from DH). Should be the same as ASYM_ENCRYPT.sym_algorithm if ASYM_ENCRYPT is used
secret_key_length	string	The length of the secret key (in bits) to be sent up the stack. AES requires 128 bits. Should be the same as ASYM_ENCRYPT.sym_keylength if ASYM_ENCRYPT is used.
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
timeout	string	Max time (in ms) that a FETCH_SECRET_KEY down event will be ignored (if an existing request is in progress) until a new request for the secret key is sent to the keyserver

DISCARD

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
discard_all	string	Drops all messages (up or down) if true
down	string
drop_down_multicasts	string	Number of subsequent multicasts to drop in the down direction
drop_down_unicasts	string	Number of subsequent unicasts to drop in the down direction
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
excludeItself	string	If discard_all is true, still sends messages to self
gui	string	use a GUI or not
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
up	string

DISCARD_PAYLOAD

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
duplicate	string
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
seqno	string
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

DROP

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

DUPL

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
copy_multicast_msgs	string	Whether or not to copy multicast messages
copy_unicast_msgs	string	Whether or not to copy unicast messages
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
incoming_copies	string	Number of copies of each incoming message (0=no copies)
level	string	logger level (see javadocs)
outgoing_copies	string	Number of copies of each outgoing message (0=no copies)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

EXAMPLE

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

FD

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
max_tries	string	Number of times to send an are-you-alive message
msg_counts_as_heartbeat	string	Treat messages received from members as heartbeats. Note that this means we're updating a value in a hashmap every time a message is passing up the stack through FD, which is costly.
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
timeout	string	Timeout to suspect a node P if neither a heartbeat nor data were received from P.

FD_ALL

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
interval	string	Interval at which a HEARTBEAT is sent to the cluster
level	string	logger level (see javadocs)
msg_counts_as_heartbeat	string	Treat messages received from members as heartbeats. Note that this means we're updating a value in a hashmap every time a message is passing up the stack through FD_ALL, which is costly. Default is false
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
timeout	string	Timeout after which a node P is suspected if neither a heartbeat nor data were received from P
timeout_check_interval	string	Interval at which the HEARTBEAT timeouts are checked
use_time_service	string	Uses TimeService to get the current time rather than System.currentTimeMillis. Might get removed soon, don't use !

FD_ALL2

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
interval	string	Interval at which a HEARTBEAT is sent to the cluster
level	string	logger level (see javadocs)
msg_counts_as_heartbeat	string	Treat messages received from members as heartbeats. Note that this means we're updating a value in a hashmap every time a message is passing up the stack through FD_ALL2, which is costly. Default is false
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
timeout	string	Timeout after which a node P is suspected if neither a heartbeat nor data were received from P

FD_HOST

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
check_timeout	string	Max time (in ms) that a liveness check for a single host can take
cmd	string	The command used to check a given host for liveness. Example: "ping". If null, InetAddress.isReachable() will be used by default
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
interval	string	The interval (in ms) at which the hosts are checked for liveness
level	string	logger level (see javadocs)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
timeout	string	Max time (in ms) after which a host is suspected if it failed all liveness checks
use_time_service	string	Uses TimeService to get the current time rather than System.currentTimeMillis. Might get removed soon, don't use !

FD_SOCK

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
bind_addr	string	The NIC on which the ServerSocket should listen on. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL and NON_LOOPBACK
cache_max_age	string	Max age (in ms) an element marked as removed has to have until it is removed
cache_max_elements	string	Max number of elements in the cache until deleted elements are removed
client_bind_port	string	Start port for client socket. Default value of 0 picks a random port
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
external_addr	string	Use "external_addr" if you have hosts on different networks, behind firewalls. On each firewall, set up a port forwarding rule (sometimes called "virtual server") to the local IP (e.g. 192.168.1.100) of the host then on each host, set "external_addr" TCP transport parameter to the external (public IP) address of the firewall.
external_port	string	Used to map the internal port (bind_port) to an external port. Only used if > 0
get_cache_timeout	string	Timeout for getting socket cache from coordinator
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
keep_alive	string	Whether to use KEEP_ALIVE on the ping socket or not. Default is true
level	string	logger level (see javadocs)
num_tries	string	Number of attempts coordinator is solicited for socket cache until we give up
port_range	string	Number of ports to probe for start_port and client_bind_port
sock_conn_timeout	string	Max time in millis to wait for ping Socket.connect() to return
start_port	string	Start port for server socket. Default value of 0 picks a random port
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
suspect_msg_interval	string	Interval for broadcasting suspect messages

FILE_PING

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
async_discovery	string	If true then the discovery is done on a separate timer thread. Should be set to true when discovery is blocking and/or takes more than a few milliseconds
async_discovery_use_separate_thread_per_request	string	If enabled, use a separate thread for every discovery request. Can be used with or without async_discovery
break_on_coord_rsp	string	Return from the discovery phase as soon as we have 1 coordinator response
discovery_rsp_expiry_time	string	Expiry time of discovery responses in ms
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
info_writer_max_writes_after_view	string	The max number of times my own information should be written to the storage after a view change
info_writer_sleep_time	string	Interval (in ms) at which the info writer should kick in
level	string	logger level (see javadocs)
location	string	The absolute path of the shared file
max_members_in_discovery_request	string	Max size of the member list shipped with a discovery request. If we have more, the mbrs field in the discovery request header is nulled and members return the entire membership, not individual members
max_rank_to_reply	string	The max rank of this member to respond to discovery requests, e.g. if max_rank_to_reply=2 in {A,B,C,D,E}, only A (rank 1) and B (rank 2) will reply. A value <= 0 means everybody will reply. This attribute is ignored if TP.use_ip_addrs is false.
num_discovery_runs	string	The number of times a discovery process is executed when finding initial members (https://issues.jboss.org/browse/JGRP-2317)
register_shutdown_hook	string	If set, a shutdown hook is registered with the JVM to remove the local address from the store. Default is true
remove_all_data_on_view_change	string	If true, on a view change, the new coordinator removes all data except its own
remove_old_coords_on_view_change	string	If true, on a view change, the new coordinator removes files from old coordinators
return_entire_cache	string	Whether or not to return the entire logical-physical address cache mappings on a discovery request, or not.
send_cache_on_join	string	When a new node joins, and we have a static discovery protocol (TCPPING), then send the contents of the discovery cache to new and existing members if true (and we're the coord). Addresses JGRP-1903
stagger_timeout	string	If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
update_store_on_view_change	string	Change the backend store when the view changes. If off, then the file is only changed on joins, but not on leaves. Enabling this will increase traffic to the backend store.
use_disk_cache	string	If a persistent disk cache (PDC) is present, combine the discovery results with the contents of the disk cache before returning the results
write_data_on_find	string	When a non-initial discovery is run, and InfoWriter is not running, write the data to disk (if true). JIRA: https://issues.jboss.org/browse/JGRP-2288

FORK

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
config	string	Points to an XML file defining the fork-stacks, which will be created at initialization. Ignored if null
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
process_state_events	string	If enabled, state transfer events will be processed, else they will be passed up
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

fork-stacks

FORWARD_TO_COORD

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

FRAG

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
frag_size	string	The max number of bytes in a message. Larger messages will be fragmented. Default is 8192 bytes
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

FRAG2

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
frag_size	string	The max number of bytes in a message. Larger messages will be fragmented
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

FRAG3

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
frag_size	string	The max number of bytes in a message. Larger messages will be fragmented
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

GOOGLE_PING

Name	Type	Description
access_key	string	The access key to AWS (S3)
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
async_discovery	string	If true then the discovery is done on a separate timer thread. Should be set to true when discovery is blocking and/or takes more than a few milliseconds
async_discovery_use_separate_thread_per_request	string	If enabled, use a separate thread for every discovery request. Can be used with or without async_discovery
break_on_coord_rsp	string	Return from the discovery phase as soon as we have 1 coordinator response
discovery_rsp_expiry_time	string	Expiry time of discovery responses in ms
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
host	string	The name of the AWS server
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
info_writer_max_writes_after_view	string	The max number of times my own information should be written to the storage after a view change
info_writer_sleep_time	string	Interval (in ms) at which the info writer should kick in
level	string	logger level (see javadocs)
location	string	The absolute path of the shared file
max_members_in_discovery_request	string	Max size of the member list shipped with a discovery request. If we have more, the mbrs field in the discovery request header is nulled and members return the entire membership, not individual members
max_rank_to_reply	string	The max rank of this member to respond to discovery requests, e.g. if max_rank_to_reply=2 in {A,B,C,D,E}, only A (rank 1) and B (rank 2) will reply. A value <= 0 means everybody will reply. This attribute is ignored if TP.use_ip_addrs is false.
num_discovery_runs	string	The number of times a discovery process is executed when finding initial members (https://issues.jboss.org/browse/JGRP-2317)
port	string	The port at which AWS is listening
pre_signed_delete_url	string	When non-null, we use this pre-signed URL for DELETEs
pre_signed_put_url	string	When non-null, we use this pre-signed URL for PUTs
prefix	string	When non-null, we set location to prefix-UUID
register_shutdown_hook	string	If set, a shutdown hook is registered with the JVM to remove the local address from the store. Default is true
remove_all_data_on_view_change	string	If true, on a view change, the new coordinator removes all data except its own
remove_old_coords_on_view_change	string	If true, on a view change, the new coordinator removes files from old coordinators
return_entire_cache	string	Whether or not to return the entire logical-physical address cache mappings on a discovery request, or not.
secret_access_key	string	The secret access key to AWS (S3)
send_cache_on_join	string	When a new node joins, and we have a static discovery protocol (TCPPING), then send the contents of the discovery cache to new and existing members if true (and we're the coord). Addresses JGRP-1903
skip_bucket_existence_check	string	Skip the code which checks if a bucket exists in initialization
stagger_timeout	string	If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
update_store_on_view_change	string	Change the backend store when the view changes. If off, then the file is only changed on joins, but not on leaves. Enabling this will increase traffic to the backend store.
use_disk_cache	string	If a persistent disk cache (PDC) is present, combine the discovery results with the contents of the disk cache before returning the results
use_ssl	string	Whether or not to use SSL to connect to host:port
write_data_on_find	string	When a non-initial discovery is run, and InfoWriter is not running, write the data to disk (if true). JIRA: https://issues.jboss.org/browse/JGRP-2288

HDRS

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
print_down	string	Enables printing of down messages
print_up	string	Enables printing of up (received) messages
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

INJECT_VIEW

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

JDBC_PING

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
async_discovery	string	If true then the discovery is done on a separate timer thread. Should be set to true when discovery is blocking and/or takes more than a few milliseconds
async_discovery_use_separate_thread_per_request	string	If enabled, use a separate thread for every discovery request. Can be used with or without async_discovery
break_on_coord_rsp	string	Return from the discovery phase as soon as we have 1 coordinator response
clear_sql	string	SQL to clear the table
connection_driver	string	The JDBC connection driver name
connection_password	string	The JDBC connection password
connection_url	string	The JDBC connection URL
connection_username	string	The JDBC connection username
contains_sql	string	Finds a given entry by its address and cluster name, used to implement a contains()
datasource_jndi_name	string	To use a DataSource registered in JNDI, specify the JNDI name here. This is an alternative to all connection_* configuration options: if this property is not empty, then all connection relatedproperties must be empty.
delete_single_sql	string	SQL used to delete a row. Customizable, but keep the order of parameters and pick compatible types: 1)Own Address, as String 2)Cluster name, as String
discovery_rsp_expiry_time	string	Expiry time of discovery responses in ms
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
info_writer_max_writes_after_view	string	The max number of times my own information should be written to the storage after a view change
info_writer_sleep_time	string	Interval (in ms) at which the info writer should kick in
initialize_sql	string	If not empty, this SQL statement will be performed at startup.Customize it to create the needed table on those databases which permit table creation attempt without losing data, such as PostgreSQL and MySQL (using IF NOT EXISTS). To allow for creation attempts, errors performing this statement will be loggedbut not considered fatal. To avoid any DDL operation, set this to an empty string.
insert_single_sql	string	SQL used to insert a new row. Customizable, but keep the order of parameters and pick compatible types: 1)Own Address, as String 2)Cluster name, as String 3)Serialized PingData as byte[]
level	string	logger level (see javadocs)
location	string	The absolute path of the shared file
max_members_in_discovery_request	string	Max size of the member list shipped with a discovery request. If we have more, the mbrs field in the discovery request header is nulled and members return the entire membership, not individual members
max_rank_to_reply	string	The max rank of this member to respond to discovery requests, e.g. if max_rank_to_reply=2 in {A,B,C,D,E}, only A (rank 1) and B (rank 2) will reply. A value <= 0 means everybody will reply. This attribute is ignored if TP.use_ip_addrs is false.
num_discovery_runs	string	The number of times a discovery process is executed when finding initial members (https://issues.jboss.org/browse/JGRP-2317)
register_shutdown_hook	string	If set, a shutdown hook is registered with the JVM to remove the local address from the store. Default is true
remove_all_data_on_view_change	string	If true, on a view change, the new coordinator removes all data except its own
remove_old_coords_on_view_change	string	If true, on a view change, the new coordinator removes files from old coordinators
return_entire_cache	string	Whether or not to return the entire logical-physical address cache mappings on a discovery request, or not.
select_all_pingdata_sql	string	SQL used to fetch all node's PingData. Customizable, but keep the order of parameters and pick compatible types: only one parameter needed, String compatible, representing the Cluster name. Must return a byte[], the Serialized PingData as it was stored by the insert_single_sql statement. Must select primary keys subsequently for cleanup to work properly
send_cache_on_join	string	When a new node joins, and we have a static discovery protocol (TCPPING), then send the contents of the discovery cache to new and existing members if true (and we're the coord). Addresses JGRP-1903
stagger_timeout	string	If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
update_store_on_view_change	string	Change the backend store when the view changes. If off, then the file is only changed on joins, but not on leaves. Enabling this will increase traffic to the backend store.
use_disk_cache	string	If a persistent disk cache (PDC) is present, combine the discovery results with the contents of the disk cache before returning the results
write_data_on_find	string	When a non-initial discovery is run, and InfoWriter is not running, write the data to disk (if true). JIRA: https://issues.jboss.org/browse/JGRP-2288

LOCAL_PING

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
async_discovery	string	If true then the discovery is done on a separate timer thread. Should be set to true when discovery is blocking and/or takes more than a few milliseconds
async_discovery_use_separate_thread_per_request	string	If enabled, use a separate thread for every discovery request. Can be used with or without async_discovery
break_on_coord_rsp	string	Return from the discovery phase as soon as we have 1 coordinator response
discovery_rsp_expiry_time	string	Expiry time of discovery responses in ms
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
max_members_in_discovery_request	string	Max size of the member list shipped with a discovery request. If we have more, the mbrs field in the discovery request header is nulled and members return the entire membership, not individual members
max_rank_to_reply	string	The max rank of this member to respond to discovery requests, e.g. if max_rank_to_reply=2 in {A,B,C,D,E}, only A (rank 1) and B (rank 2) will reply. A value <= 0 means everybody will reply. This attribute is ignored if TP.use_ip_addrs is false.
num_discovery_runs	string	The number of times a discovery process is executed when finding initial members (https://issues.jboss.org/browse/JGRP-2317)
return_entire_cache	string	Whether or not to return the entire logical-physical address cache mappings on a discovery request, or not.
send_cache_on_join	string	When a new node joins, and we have a static discovery protocol (TCPPING), then send the contents of the discovery cache to new and existing members if true (and we're the coord). Addresses JGRP-1903
stagger_timeout	string	If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
use_disk_cache	string	If a persistent disk cache (PDC) is present, combine the discovery results with the contents of the disk cache before returning the results

MAKE_BATCH

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
multicasts	string	handle multicast messages
sleep_time	string	Time to sleep (in ms) from the reception of the first message to sending a batch up
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
unicasts	string	handle unicast messages

MERGE3

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
check_interval	string	Interval (in ms) after which we check for view inconsistencies
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
max_interval	string	Interval (in milliseconds) when the next info message will be sent. A random value is picked from range [1..max_interval]
max_participants_in_merge	string	The max number of merge participants to be involved in a merge. 0 sets this to unlimited.
min_interval	string	Minimum time in ms before sending an info message
only_coords_run_consistency_checker	string	If true, only coordinators periodically check view consistency, otherwise everybody runs this task (https://issues.jboss.org/browse/JGRP-2092). Might get removed without notice.
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

MFC

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
max_block_time	string	Max time (in ms) to block
max_block_times	string	Max times to block for the listed messages sizes (Message.getLength()). Example: "1000:10,5000:30,10000:500"
max_credits	string	Max number of bytes to send per receiver until an ack must be received to proceed
min_credits	string	Computed as max_credits x min_theshold unless explicitly set
min_threshold	string	The threshold (as a percentage of max_credits) at which a receiver sends more credits to a sender. Example: if max_credits is 1'000'000, and min_threshold 0.25, then we send ca. 250'000 credits to P once we've got only 250'000 credits left for P (we've received 750'000 bytes from P)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

MFC_NB

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
max_block_time	string	Max time (in ms) to block
max_block_times	string	Max times to block for the listed messages sizes (Message.getLength()). Example: "1000:10,5000:30,10000:500"
max_credits	string	Max number of bytes to send per receiver until an ack must be received to proceed
max_queue_size	string	Max number of bytes of all queued messages for a given destination. If a given destination has no credits left and the message cannot be added to the queue because it is full, then the sender thread will be blocked until there is again space available in the queue, or the protocol is stopped.
min_credits	string	Computed as max_credits x min_theshold unless explicitly set
min_threshold	string	The threshold (as a percentage of max_credits) at which a receiver sends more credits to a sender. Example: if max_credits is 1'000'000, and min_threshold 0.25, then we send ca. 250'000 credits to P once we've got only 250'000 credits left for P (we've received 750'000 bytes from P)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

MPING

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
async_discovery	string	If true then the discovery is done on a separate timer thread. Should be set to true when discovery is blocking and/or takes more than a few milliseconds
async_discovery_use_separate_thread_per_request	string	If enabled, use a separate thread for every discovery request. Can be used with or without async_discovery
bind_addr	string	Bind address for multicast socket. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL and NON_LOOPBACK
bind_interface	string	The interface (NIC) which should be used by this transport
break_on_coord_rsp	string	Return from the discovery phase as soon as we have 1 coordinator response
discovery_rsp_expiry_time	string	Expiry time of discovery responses in ms
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
ip_ttl	string	Time to live for discovery packets. Default is 8
level	string	logger level (see javadocs)
max_members_in_discovery_request	string	Max size of the member list shipped with a discovery request. If we have more, the mbrs field in the discovery request header is nulled and members return the entire membership, not individual members
max_rank_to_reply	string	The max rank of this member to respond to discovery requests, e.g. if max_rank_to_reply=2 in {A,B,C,D,E}, only A (rank 1) and B (rank 2) will reply. A value <= 0 means everybody will reply. This attribute is ignored if TP.use_ip_addrs is false.
mcast_addr	string	Multicast address to be used for discovery
mcast_port	string	Multicast port for discovery packets. Default is 7555
num_discovery_runs	string	The number of times a discovery process is executed when finding initial members (https://issues.jboss.org/browse/JGRP-2317)
receive_interfaces	string	List of interfaces to receive multicasts on
receive_on_all_interfaces	string	If true, the transport should use all available interfaces to receive multicast messages
return_entire_cache	string	Whether or not to return the entire logical-physical address cache mappings on a discovery request, or not.
send_cache_on_join	string	When a new node joins, and we have a static discovery protocol (TCPPING), then send the contents of the discovery cache to new and existing members if true (and we're the coord). Addresses JGRP-1903
send_interfaces	string	List of interfaces to send multicasts on
send_on_all_interfaces	string	Whether send messages are sent on all interfaces. Default is false
stagger_timeout	string	If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
use_disk_cache	string	If a persistent disk cache (PDC) is present, combine the discovery results with the contents of the disk cache before returning the results

MULTI_PING

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
async_discovery	string	If true then the discovery is done on a separate timer thread. Should be set to true when discovery is blocking and/or takes more than a few milliseconds
async_discovery_use_separate_thread_per_request	string	If enabled, use a separate thread for every discovery request. Can be used with or without async_discovery
break_on_coord_rsp	string	Return from the discovery phase as soon as we have 1 coordinator response
discovery_rsp_expiry_time	string	Expiry time of discovery responses in ms
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
max_members_in_discovery_request	string	Max size of the member list shipped with a discovery request. If we have more, the mbrs field in the discovery request header is nulled and members return the entire membership, not individual members
max_rank_to_reply	string	The max rank of this member to respond to discovery requests, e.g. if max_rank_to_reply=2 in {A,B,C,D,E}, only A (rank 1) and B (rank 2) will reply. A value <= 0 means everybody will reply. This attribute is ignored if TP.use_ip_addrs is false.
num_discovery_runs	string	The number of times a discovery process is executed when finding initial members (https://issues.jboss.org/browse/JGRP-2317)
return_entire_cache	string	Whether or not to return the entire logical-physical address cache mappings on a discovery request, or not.
send_cache_on_join	string	When a new node joins, and we have a static discovery protocol (TCPPING), then send the contents of the discovery cache to new and existing members if true (and we're the coord). Addresses JGRP-1903
stagger_timeout	string	If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
use_disk_cache	string	If a persistent disk cache (PDC) is present, combine the discovery results with the contents of the disk cache before returning the results

NAMING

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
stagger_timeout	string	Stagger timeout (in ms). Staggering will be a random timeout in range [0 .. stagger_timeout]
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

PDC

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
cache_dir	string	The absolute path of the directory for the disk cache. The mappings will be stored as individual files in this directory
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

PERF

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
avg_size	string	Number of samples to maintain for rolling average
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

PING

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
async_discovery	string	If true then the discovery is done on a separate timer thread. Should be set to true when discovery is blocking and/or takes more than a few milliseconds
async_discovery_use_separate_thread_per_request	string	If enabled, use a separate thread for every discovery request. Can be used with or without async_discovery
break_on_coord_rsp	string	Return from the discovery phase as soon as we have 1 coordinator response
discovery_rsp_expiry_time	string	Expiry time of discovery responses in ms
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
max_members_in_discovery_request	string	Max size of the member list shipped with a discovery request. If we have more, the mbrs field in the discovery request header is nulled and members return the entire membership, not individual members
max_rank_to_reply	string	The max rank of this member to respond to discovery requests, e.g. if max_rank_to_reply=2 in {A,B,C,D,E}, only A (rank 1) and B (rank 2) will reply. A value <= 0 means everybody will reply. This attribute is ignored if TP.use_ip_addrs is false.
num_discovery_runs	string	The number of times a discovery process is executed when finding initial members (https://issues.jboss.org/browse/JGRP-2317)
return_entire_cache	string	Whether or not to return the entire logical-physical address cache mappings on a discovery request, or not.
send_cache_on_join	string	When a new node joins, and we have a static discovery protocol (TCPPING), then send the contents of the discovery cache to new and existing members if true (and we're the coord). Addresses JGRP-1903
stagger_timeout	string	If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
use_disk_cache	string	If a persistent disk cache (PDC) is present, combine the discovery results with the contents of the disk cache before returning the results

RACKSPACE_PING

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
apiKey	string	Rackspace API access key
async_discovery	string	If true then the discovery is done on a separate timer thread. Should be set to true when discovery is blocking and/or takes more than a few milliseconds
async_discovery_use_separate_thread_per_request	string	If enabled, use a separate thread for every discovery request. Can be used with or without async_discovery
break_on_coord_rsp	string	Return from the discovery phase as soon as we have 1 coordinator response
container	string	Name of the root container
discovery_rsp_expiry_time	string	Expiry time of discovery responses in ms
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
info_writer_max_writes_after_view	string	The max number of times my own information should be written to the storage after a view change
info_writer_sleep_time	string	Interval (in ms) at which the info writer should kick in
level	string	logger level (see javadocs)
location	string	The absolute path of the shared file
max_members_in_discovery_request	string	Max size of the member list shipped with a discovery request. If we have more, the mbrs field in the discovery request header is nulled and members return the entire membership, not individual members
max_rank_to_reply	string	The max rank of this member to respond to discovery requests, e.g. if max_rank_to_reply=2 in {A,B,C,D,E}, only A (rank 1) and B (rank 2) will reply. A value <= 0 means everybody will reply. This attribute is ignored if TP.use_ip_addrs is false.
num_discovery_runs	string	The number of times a discovery process is executed when finding initial members (https://issues.jboss.org/browse/JGRP-2317)
region	string	Rackspace region, either UK or US
register_shutdown_hook	string	If set, a shutdown hook is registered with the JVM to remove the local address from the store. Default is true
remove_all_data_on_view_change	string	If true, on a view change, the new coordinator removes all data except its own
remove_old_coords_on_view_change	string	If true, on a view change, the new coordinator removes files from old coordinators
return_entire_cache	string	Whether or not to return the entire logical-physical address cache mappings on a discovery request, or not.
send_cache_on_join	string	When a new node joins, and we have a static discovery protocol (TCPPING), then send the contents of the discovery cache to new and existing members if true (and we're the coord). Addresses JGRP-1903
stagger_timeout	string	If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
update_store_on_view_change	string	Change the backend store when the view changes. If off, then the file is only changed on joins, but not on leaves. Enabling this will increase traffic to the backend store.
use_disk_cache	string	If a persistent disk cache (PDC) is present, combine the discovery results with the contents of the disk cache before returning the results
username	string	Rackspace username
write_data_on_find	string	When a non-initial discovery is run, and InfoWriter is not running, write the data to disk (if true). JIRA: https://issues.jboss.org/browse/JGRP-2288

RATE_LIMITER

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
max_bytes	string	Max number of bytes to be sent in time_period ms. Blocks the sender if exceeded until a new time period has started
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
time_period	string	Number of milliseconds during which max_bytes bytes can be sent

RELAY

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
bridge_name	string	Name of the bridge cluster
bridge_props	string	Properties of the bridge cluster (e.g. tcp.xml)
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
present_global_views	string	Drops views received from below and instead generates global views and passes them up. A global view consists of the local view and the remote view, ordered by view ID. If true, no protocolwhich requires (local) views can sit on top of RELAY
relay	string	If set to false, don't perform relaying. Used e.g. for backup clusters; unidirectional replication from one cluster to another, but not back. Can be changed at runtime
site	string	Description of the local cluster, e.g. "nyc". This is added to every address, so itshould be short. This is a mandatory property and must be set
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

RSVP

Name	Type	Description
ack_on_delivery	string	When true, we pass the message up to the application and only then send an ack. When false, we send an ack first and only then pass the message up to the application.
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
resend_interval	string	Interval (in milliseconds) at which we resend the RSVP request. Needs to be < timeout. 0 disables it.
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
throw_exception_on_timeout	string	Whether an exception should be thrown when the timeout kicks in, and we haven't yet received all acks. An exception would be thrown all the way up to JChannel.send(). If we use RSVP_NB, this will be ignored.
timeout	string	Max time in milliseconds to block for an RSVP'ed message (0 blocks forever).

S3_PING

Name	Type	Description
access_key	string	The access key to AWS (S3)
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
async_discovery	string	If true then the discovery is done on a separate timer thread. Should be set to true when discovery is blocking and/or takes more than a few milliseconds
async_discovery_use_separate_thread_per_request	string	If enabled, use a separate thread for every discovery request. Can be used with or without async_discovery
break_on_coord_rsp	string	Return from the discovery phase as soon as we have 1 coordinator response
discovery_rsp_expiry_time	string	Expiry time of discovery responses in ms
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
host	string	The name of the AWS server
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
info_writer_max_writes_after_view	string	The max number of times my own information should be written to the storage after a view change
info_writer_sleep_time	string	Interval (in ms) at which the info writer should kick in
level	string	logger level (see javadocs)
location	string	The absolute path of the shared file
max_members_in_discovery_request	string	Max size of the member list shipped with a discovery request. If we have more, the mbrs field in the discovery request header is nulled and members return the entire membership, not individual members
max_rank_to_reply	string	The max rank of this member to respond to discovery requests, e.g. if max_rank_to_reply=2 in {A,B,C,D,E}, only A (rank 1) and B (rank 2) will reply. A value <= 0 means everybody will reply. This attribute is ignored if TP.use_ip_addrs is false.
num_discovery_runs	string	The number of times a discovery process is executed when finding initial members (https://issues.jboss.org/browse/JGRP-2317)
port	string	The port at which AWS is listening
pre_signed_delete_url	string	When non-null, we use this pre-signed URL for DELETEs
pre_signed_put_url	string	When non-null, we use this pre-signed URL for PUTs
prefix	string	When non-null, we set location to prefix-UUID
register_shutdown_hook	string	If set, a shutdown hook is registered with the JVM to remove the local address from the store. Default is true
remove_all_data_on_view_change	string	If true, on a view change, the new coordinator removes all data except its own
remove_old_coords_on_view_change	string	If true, on a view change, the new coordinator removes files from old coordinators
return_entire_cache	string	Whether or not to return the entire logical-physical address cache mappings on a discovery request, or not.
secret_access_key	string	The secret access key to AWS (S3)
send_cache_on_join	string	When a new node joins, and we have a static discovery protocol (TCPPING), then send the contents of the discovery cache to new and existing members if true (and we're the coord). Addresses JGRP-1903
skip_bucket_existence_check	string	Skip the code which checks if a bucket exists in initialization
stagger_timeout	string	If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
update_store_on_view_change	string	Change the backend store when the view changes. If off, then the file is only changed on joins, but not on leaves. Enabling this will increase traffic to the backend store.
use_disk_cache	string	If a persistent disk cache (PDC) is present, combine the discovery results with the contents of the disk cache before returning the results
use_ssl	string	Whether or not to use SSL to connect to host:port
write_data_on_find	string	When a non-initial discovery is run, and InfoWriter is not running, write the data to disk (if true). JIRA: https://issues.jboss.org/browse/JGRP-2288

SASL

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
client_callback_handler	string	The CallbackHandler to use when a node acts as a client (i.e. it is not the coordinator
client_callback_handler_class	string
client_name	string	The name to use when a node is acting as a client (i.e. it is not the coordinator. Will also be used to obtain the subject if using a JAAS login module
client_password	string	The password to use when a node is acting as a client (i.e. it is not the coordinator. Will also be used to obtain the subject if using a JAAS login module
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
login_module_name	string	The name of the JAAS login module to use to obtain a subject for creating the SASL client and server (optional). Only required by some SASL mechs (e.g. GSSAPI)
mech	string	The name of the mech to require for authentication. Can be any mech supported by your local SASL provider. The JDK comes standard with CRAM-MD5, DIGEST-MD5, GSSAPI, NTLM
sasl_props	string	Properties specific to the chosen mech
server_callback_handler	string	The CallbackHandler to use when a node acts as a server (i.e. it is the coordinator
server_callback_handler_class	string
server_name	string	The fully qualified server name
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
timeout	string	How long to wait (in ms) for a response to a challenge

SEQUENCER

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
delivery_table_max_size	string	Size of the set to store received seqnos (for duplicate checking)
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
flush_forward_table	string	If true, all messages in the forward-table are sent to the new coord, else thye're dropped (https://issues.jboss.org/browse/JGRP-2268)
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
threshold	string	Number of acks needed before going from ack-mode to normal mode. 0 disables this, which means that ack-mode is always on

SEQUENCER2

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

SERIALIZE

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

SHARED_LOOPBACK

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
bind_addr	string	The bind address which should be used by this transport. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL, NON_LOOPBACK, match-interface, match-host, match-address
bind_port	string	The port to which the transport binds. Default of 0 binds to any (ephemeral) port. See also port_range
bundler_capacity	string	The max number of elements in a bundler if the bundler supports size limitations
bundler_num_spins	string	Number of spins before a real lock is acquired
bundler_type	string	The type of bundler used ("ring-buffer", "transfer-queue" (default), "sender-sends" or "no-bundler") or the fully qualified classname of a Bundler implementation
bundler_wait_strategy	string	The wait strategy for a RingBuffer
diag_enable_tcp	string	Use a TCP socket to listen for probe requests (ignored if enable_diagnostics is false)
diag_enable_udp	string	Use a multicast socket to listen for probe requests (ignored if enable_diagnostics is false)
diagnostics_addr	string	Multicast address for diagnostic probing. Used when diag_enable_udp is true
diagnostics_bind_addr	string	Bind address for diagnostic probing. Used when diag_enable_tcp is true
diagnostics_bind_interfaces	string	Comma delimited list of interfaces (IP addresses or interface names) that the diagnostics multicast socket should bind to
diagnostics_passcode	string	Authorization passcode for diagnostics. If specified every probe query will be authorized
diagnostics_port	string	Port for diagnostic probing. Default is 7500
diagnostics_port_range	string	The number of ports to be probed for an available port (TCP)
diagnostics_ttl	string	TTL of the diagnostics multicast socket
enable_diagnostics	string	Switch to enable diagnostic probing. Default is true
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
external_addr	string	Use "external_addr" if you have hosts on different networks, behind firewalls. On each firewall, set up a port forwarding rule (sometimes called "virtual server") to the local IP (e.g. 192.168.1.100) of the host then on each host, set "external_addr" TCP transport parameter to the external (public IP) address of the firewall.
external_port	string	Used to map the internal port (bind_port) to an external port. Only used if > 0
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
log_discard_msgs	string	whether or not warnings about messages from different groups are logged
log_discard_msgs_version	string	whether or not warnings about messages from members with a different version are discarded
logical_addr_cache_expiration	string	Time (in ms) after which entries in the logical address cache marked as removable can be removed. 0 never removes any entries (not recommended)
logical_addr_cache_max_size	string	Max number of elements in the logical address cache before eviction starts
logical_addr_cache_reaper_interval	string	Interval (in ms) at which the reaper task scans logical_addr_cache and removes entries marked as removable. 0 disables reaping.
loopback_copy	string	Whether or not to make a copy of a message before looping it back up. Don't use this; might get removed without warning
loopback_separate_thread	string	Loop back the message on a separate thread or use the current thread. Don't use this; might get removed without warning
max_bundle_size	string	Maximum number of bytes for messages to be queued until they are sent
message_processing_policy	string	The fully qualified name of a class implementing MessageProcessingPolicy
message_processing_policy.max_buffer_size	string	Max number of messages buffered for consumption of the delivery thread in MaxOneThreadPerSender. 0 creates an unbounded buffer
port_range	string	The range of valid ports: [bind_port .. bind_port+port_range ]. 0 only binds to bind_port and fails if taken
receive_interfaces	string	Comma delimited list of interfaces (IP addresses or interface names) to receive multicasts on
receive_on_all_interfaces	string	If true, the transport should use all available interfaces to receive multicast messages
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
suppress_time_different_cluster_warnings	string	Time during which identical warnings about messages from a member from a different cluster will be suppressed. 0 disables this (every warning will be logged). Setting the log level to ERROR also disables this.
suppress_time_different_version_warnings	string	Time during which identical warnings about messages from a member with a different version will be suppressed. 0 disables this (every warning will be logged). Setting the log level to ERROR also disables this.
thread_naming_pattern	string	Thread naming pattern for threads in this channel. Valid values are "pcl": "p": includes the thread name, e.g. "Incoming thread-1", "UDP ucast receiver", "c": includes the cluster name, e.g. "MyCluster", "l": includes the local address of the current member, e.g. "192.168.5.1:5678"
thread_pool.enabled	string	Enable or disable the thread pool
thread_pool.keep_alive_time	string	Timeout in milliseconds to remove idle threads from pool
thread_pool.max_threads	string	Maximum thread pool size for the thread pool
thread_pool.min_threads	string	Minimum thread pool size for the thread pool
thread_pool.use_common_fork_join_pool	string	If true, the common fork-join pool will be used; otherwise a custom ForkJoinPool will be created
thread_pool.use_fork_join_pool	string	If enabled, a ForkJoinPool will be used rather than a ThreadPoolExecutor
time_service_interval	string	Interval (in ms) at which the time service updates its timestamp. 0 disables the time service
use_ip_addrs	string	Use IP addresses (IpAddressUUID) instead of UUIDs as addresses. This is currently not compatible with RELAY2: disable if RELAY2 is used.
who_has_cache_timeout	string	Timeout (in ms) to determine how long to wait until a request to fetch the physical address for a given logical address will be sent again. Subsequent requests for the same physical address will therefore be spaced at least who_has_cache_timeout ms apart

SHARED_LOOPBACK_PING

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
async_discovery	string	If true then the discovery is done on a separate timer thread. Should be set to true when discovery is blocking and/or takes more than a few milliseconds
async_discovery_use_separate_thread_per_request	string	If enabled, use a separate thread for every discovery request. Can be used with or without async_discovery
break_on_coord_rsp	string	Return from the discovery phase as soon as we have 1 coordinator response
discovery_rsp_expiry_time	string	Expiry time of discovery responses in ms
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
max_members_in_discovery_request	string	Max size of the member list shipped with a discovery request. If we have more, the mbrs field in the discovery request header is nulled and members return the entire membership, not individual members
max_rank_to_reply	string	The max rank of this member to respond to discovery requests, e.g. if max_rank_to_reply=2 in {A,B,C,D,E}, only A (rank 1) and B (rank 2) will reply. A value <= 0 means everybody will reply. This attribute is ignored if TP.use_ip_addrs is false.
num_discovery_runs	string	The number of times a discovery process is executed when finding initial members (https://issues.jboss.org/browse/JGRP-2317)
return_entire_cache	string	Whether or not to return the entire logical-physical address cache mappings on a discovery request, or not.
send_cache_on_join	string	When a new node joins, and we have a static discovery protocol (TCPPING), then send the contents of the discovery cache to new and existing members if true (and we're the coord). Addresses JGRP-1903
stagger_timeout	string	If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
use_disk_cache	string	If a persistent disk cache (PDC) is present, combine the discovery results with the contents of the disk cache before returning the results

SHUFFLE

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
down	string	Reorder down messages and message batches
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
max_size	string	max number of messages before we reorder queued messages and send them up
max_time	string	max time (in millis) before we pass the reordered messages up or down
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
up	string	Reorder up messages and message batches

SIZE

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
min_size	string
print_msg	string
raw_buffer	string
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

SNIFF

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
down	string	Print sent messages
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
up	string	Print received messages

SSL_KEY_EXCHANGE

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
bind_addr	string	Bind address for the server or client socket. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL and NON_LOOPBACK
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
keystore_name	string	Location of the keystore
keystore_password	string	Password to access the keystore
keystore_type	string	The type of the keystore. Types are listed in http://docs.oracle.com/javase/8/docs/technotes/tools/unix/keytool.html
level	string	logger level (see javadocs)
port	string	The port at which the key server is listening. If the port is not available, the next port will be probed, up to port+port_range. Used by the key server (server) to create an SSLServerSocket and by clients to connect to the key server.
port_range	string	The port range to probe
require_client_authentication	string	If enabled, clients are authenticated as well (not just the server). Set to true to prevent rogue clients to fetch the secret group key (e.g. via man-in-the-middle attacks)
secret_key_algorithm	string	The type of secret key to be sent up the stack (converted from DH). Should be the same as ASYM_ENCRYPT.sym_algorithm if ASYM_ENCRYPT is used
session_verifier_arg	string	The argument to the session verifier
session_verifier_class	string	The fully qualified name of a class implementing SessionVerifier
socket_timeout	string	Timeout (in ms) for a socket read. This applies for example to the initial SSL handshake, e.g. if the client connects to a non-JGroups service accidentally running on the same port
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

STATS

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

STOMP

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
bind_addr	string	The bind address which should be used by the server socket. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL and NON_LOOPBACK
endpoint_addr	string	If set, then endpoint will be set to this address
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
exact_destination_match	string	If set to false, then a destination of /a/b match /a/b/c, a/b/d, a/b/c/d etc
forward_non_client_generated_msgs	string	Forward received messages which don't have a StompHeader to clients
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
port	string	Port on which the STOMP protocol listens for requests
send_info	string	If true, information such as a list of endpoints, or views, will be sent to all clients (via the INFO command). This allows for example intelligent clients to connect to a different server should a connection be closed.
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

SWIFT_PING

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
async_discovery	string	If true then the discovery is done on a separate timer thread. Should be set to true when discovery is blocking and/or takes more than a few milliseconds
async_discovery_use_separate_thread_per_request	string	If enabled, use a separate thread for every discovery request. Can be used with or without async_discovery
auth_type	string	Authentication type
auth_url	string	Authentication url
break_on_coord_rsp	string	Return from the discovery phase as soon as we have 1 coordinator response
container	string	Name of the root container
discovery_rsp_expiry_time	string	Expiry time of discovery responses in ms
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
info_writer_max_writes_after_view	string	The max number of times my own information should be written to the storage after a view change
info_writer_sleep_time	string	Interval (in ms) at which the info writer should kick in
level	string	logger level (see javadocs)
location	string	The absolute path of the shared file
max_members_in_discovery_request	string	Max size of the member list shipped with a discovery request. If we have more, the mbrs field in the discovery request header is nulled and members return the entire membership, not individual members
max_rank_to_reply	string	The max rank of this member to respond to discovery requests, e.g. if max_rank_to_reply=2 in {A,B,C,D,E}, only A (rank 1) and B (rank 2) will reply. A value <= 0 means everybody will reply. This attribute is ignored if TP.use_ip_addrs is false.
num_discovery_runs	string	The number of times a discovery process is executed when finding initial members (https://issues.jboss.org/browse/JGRP-2317)
password	string	Password
register_shutdown_hook	string	If set, a shutdown hook is registered with the JVM to remove the local address from the store. Default is true
remove_all_data_on_view_change	string	If true, on a view change, the new coordinator removes all data except its own
remove_old_coords_on_view_change	string	If true, on a view change, the new coordinator removes files from old coordinators
return_entire_cache	string	Whether or not to return the entire logical-physical address cache mappings on a discovery request, or not.
send_cache_on_join	string	When a new node joins, and we have a static discovery protocol (TCPPING), then send the contents of the discovery cache to new and existing members if true (and we're the coord). Addresses JGRP-1903
stagger_timeout	string	If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
tenant	string	Openstack Keystone tenant name
update_store_on_view_change	string	Change the backend store when the view changes. If off, then the file is only changed on joins, but not on leaves. Enabling this will increase traffic to the backend store.
use_disk_cache	string	If a persistent disk cache (PDC) is present, combine the discovery results with the contents of the disk cache before returning the results
username	string	Username
write_data_on_find	string	When a non-initial discovery is run, and InfoWriter is not running, write the data to disk (if true). JIRA: https://issues.jboss.org/browse/JGRP-2288

SYM_ENCRYPT

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
alias	string	Alias used for recovering the key. Change the default
asym_algorithm	string	Cipher engine transformation for asymmetric algorithm. Default is RSA
asym_keylength	string	Initial public/private key length. Default is 2048
cipher_pool_size	string	Number of ciphers in the pool to parallelize encrypt and decrypt requests
encrypt_entire_message	string	If true, the entire message (including payload and headers) is encrypted, else only the payload
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
key_map_max_size	string	Max number of keys in key_map
key_password	string	Password for recovering the key. Change the default
keystore_name	string	File on classpath that contains keystore repository
keystore_type	string	The type of the keystore. Types are listed in http://docs.oracle.com/javase/8/docs/technotes/tools/unix/keytool.html
level	string	logger level (see javadocs)
provider	string	Cryptographic Service Provider
sign_msgs	string	If true, all messages are digitally signed by adding an encrypted checksum of the encrypted message to the header. Ignored if encrypt_entire_message is false
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
store_password	string	Password used to check the integrity/unlock the keystore. Change the default
sym_algorithm	string	Cipher engine transformation for symmetric algorithm. Default is AES
sym_keylength	string	Initial key length for matching symmetric algorithm. Default is 128
use_adler	string	When sign_msgs is true, by default CRC32 is used to create the checksum. If use_adler is true, Adler32 will be used

SimpleTCP

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
bind_addr	string	The bind address which should be used by this transport. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL, NON_LOOPBACK, match-interface, match-host, match-address
bind_port	string	The port to which the transport binds. Default of 0 binds to any (ephemeral) port. See also port_range
buffered_input_stream_size	string	Size of the buffer of the BufferedInputStream in TcpConnection. A read always tries to read ahead as much data as possible into the buffer. 0: default size
buffered_output_stream_size	string	Size of the buffer of the BufferedOutputStream in TcpConnection. Smaller messages are buffered until this size is exceeded or flush() is called. Bigger messages are sent immediately. 0: default size
bundler_capacity	string	The max number of elements in a bundler if the bundler supports size limitations
bundler_num_spins	string	Number of spins before a real lock is acquired
bundler_type	string	The type of bundler used ("ring-buffer", "transfer-queue" (default), "sender-sends" or "no-bundler") or the fully qualified classname of a Bundler implementation
bundler_wait_strategy	string	The wait strategy for a RingBuffer
diag_enable_tcp	string	Use a TCP socket to listen for probe requests (ignored if enable_diagnostics is false)
diag_enable_udp	string	Use a multicast socket to listen for probe requests (ignored if enable_diagnostics is false)
diagnostics_addr	string	Multicast address for diagnostic probing. Used when diag_enable_udp is true
diagnostics_bind_addr	string	Bind address for diagnostic probing. Used when diag_enable_tcp is true
diagnostics_bind_interfaces	string	Comma delimited list of interfaces (IP addresses or interface names) that the diagnostics multicast socket should bind to
diagnostics_passcode	string	Authorization passcode for diagnostics. If specified every probe query will be authorized
diagnostics_port	string	Port for diagnostic probing. Default is 7500
diagnostics_port_range	string	The number of ports to be probed for an available port (TCP)
diagnostics_ttl	string	TTL of the diagnostics multicast socket
enable_diagnostics	string	Switch to enable diagnostic probing. Default is true
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
external_addr	string	Use "external_addr" if you have hosts on different networks, behind firewalls. On each firewall, set up a port forwarding rule (sometimes called "virtual server") to the local IP (e.g. 192.168.1.100) of the host then on each host, set "external_addr" TCP transport parameter to the external (public IP) address of the firewall.
external_port	string	Used to map the internal port (bind_port) to an external port. Only used if > 0
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
log_discard_msgs	string	whether or not warnings about messages from different groups are logged
log_discard_msgs_version	string	whether or not warnings about messages from members with a different version are discarded
logical_addr_cache_expiration	string	Time (in ms) after which entries in the logical address cache marked as removable can be removed. 0 never removes any entries (not recommended)
logical_addr_cache_max_size	string	Max number of elements in the logical address cache before eviction starts
logical_addr_cache_reaper_interval	string	Interval (in ms) at which the reaper task scans logical_addr_cache and removes entries marked as removable. 0 disables reaping.
loopback_copy	string	Whether or not to make a copy of a message before looping it back up. Don't use this; might get removed without warning
loopback_separate_thread	string	Loop back the message on a separate thread or use the current thread. Don't use this; might get removed without warning
max_bundle_size	string	Maximum number of bytes for messages to be queued until they are sent
message_processing_policy	string	The fully qualified name of a class implementing MessageProcessingPolicy
message_processing_policy.max_buffer_size	string	Max number of messages buffered for consumption of the delivery thread in MaxOneThreadPerSender. 0 creates an unbounded buffer
port_range	string	The range of valid ports: [bind_port .. bind_port+port_range ]. 0 only binds to bind_port and fails if taken
receive_interfaces	string	Comma delimited list of interfaces (IP addresses or interface names) to receive multicasts on
receive_on_all_interfaces	string	If true, the transport should use all available interfaces to receive multicast messages
recv_buf_size	string	size in bytes of TCP receiver window
send_buf_size	string	size in bytes of TCP send window
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
suppress_time_different_cluster_warnings	string	Time during which identical warnings about messages from a member from a different cluster will be suppressed. 0 disables this (every warning will be logged). Setting the log level to ERROR also disables this.
suppress_time_different_version_warnings	string	Time during which identical warnings about messages from a member with a different version will be suppressed. 0 disables this (every warning will be logged). Setting the log level to ERROR also disables this.
thread_naming_pattern	string	Thread naming pattern for threads in this channel. Valid values are "pcl": "p": includes the thread name, e.g. "Incoming thread-1", "UDP ucast receiver", "c": includes the cluster name, e.g. "MyCluster", "l": includes the local address of the current member, e.g. "192.168.5.1:5678"
thread_pool.enabled	string	Enable or disable the thread pool
thread_pool.keep_alive_time	string	Timeout in milliseconds to remove idle threads from pool
thread_pool.max_threads	string	Maximum thread pool size for the thread pool
thread_pool.min_threads	string	Minimum thread pool size for the thread pool
thread_pool.use_common_fork_join_pool	string	If true, the common fork-join pool will be used; otherwise a custom ForkJoinPool will be created
thread_pool.use_fork_join_pool	string	If enabled, a ForkJoinPool will be used rather than a ThreadPoolExecutor
time_service_interval	string	Interval (in ms) at which the time service updates its timestamp. 0 disables the time service
use_ip_addrs	string	Use IP addresses (IpAddressUUID) instead of UUIDs as addresses. This is currently not compatible with RELAY2: disable if RELAY2 is used.
who_has_cache_timeout	string	Timeout (in ms) to determine how long to wait until a request to fetch the physical address for a given logical address will be sent again. Subsequent requests for the same physical address will therefore be spaced at least who_has_cache_timeout ms apart

TCP

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
bind_addr	string	The bind address which should be used by this transport. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL, NON_LOOPBACK, match-interface, match-host, match-address
bind_port	string	The port to which the transport binds. Default of 0 binds to any (ephemeral) port. See also port_range
buffered_input_stream_size	string	Size of the buffer of the BufferedInputStream in TcpConnection. A read always tries to read ahead as much data as possible into the buffer. 0: default size
buffered_output_stream_size	string	Size of the buffer of the BufferedOutputStream in TcpConnection. Smaller messages are buffered until this size is exceeded or flush() is called. Bigger messages are sent immediately. 0: default size
bundler_capacity	string	The max number of elements in a bundler if the bundler supports size limitations
bundler_num_spins	string	Number of spins before a real lock is acquired
bundler_type	string	The type of bundler used ("ring-buffer", "transfer-queue" (default), "sender-sends" or "no-bundler") or the fully qualified classname of a Bundler implementation
bundler_wait_strategy	string	The wait strategy for a RingBuffer
client_bind_addr	string	The address of a local network interface which should be used by client sockets to bind to. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL and NON_LOOPBACK
client_bind_port	string	The local port a client socket should bind to. If 0, an ephemeral port will be picked.
conn_expire_time	string	Max time connection can be idle before being reaped (in ms)
defer_client_bind_addr	string	If true, client sockets will not explicitly bind to bind_addr but will defer to the native socket
diag_enable_tcp	string	Use a TCP socket to listen for probe requests (ignored if enable_diagnostics is false)
diag_enable_udp	string	Use a multicast socket to listen for probe requests (ignored if enable_diagnostics is false)
diagnostics_addr	string	Multicast address for diagnostic probing. Used when diag_enable_udp is true
diagnostics_bind_addr	string	Bind address for diagnostic probing. Used when diag_enable_tcp is true
diagnostics_bind_interfaces	string	Comma delimited list of interfaces (IP addresses or interface names) that the diagnostics multicast socket should bind to
diagnostics_passcode	string	Authorization passcode for diagnostics. If specified every probe query will be authorized
diagnostics_port	string	Port for diagnostic probing. Default is 7500
diagnostics_port_range	string	The number of ports to be probed for an available port (TCP)
diagnostics_ttl	string	TTL of the diagnostics multicast socket
enable_diagnostics	string	Switch to enable diagnostic probing. Default is true
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
external_addr	string	Use "external_addr" if you have hosts on different networks, behind firewalls. On each firewall, set up a port forwarding rule (sometimes called "virtual server") to the local IP (e.g. 192.168.1.100) of the host then on each host, set "external_addr" TCP transport parameter to the external (public IP) address of the firewall.
external_port	string	Used to map the internal port (bind_port) to an external port. Only used if > 0
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
linger	string	SO_LINGER in msec. Default of -1 disables it
log_discard_msgs	string	whether or not warnings about messages from different groups are logged
log_discard_msgs_version	string	whether or not warnings about messages from members with a different version are discarded
logical_addr_cache_expiration	string	Time (in ms) after which entries in the logical address cache marked as removable can be removed. 0 never removes any entries (not recommended)
logical_addr_cache_max_size	string	Max number of elements in the logical address cache before eviction starts
logical_addr_cache_reaper_interval	string	Interval (in ms) at which the reaper task scans logical_addr_cache and removes entries marked as removable. 0 disables reaping.
loopback_copy	string	Whether or not to make a copy of a message before looping it back up. Don't use this; might get removed without warning
loopback_separate_thread	string	Loop back the message on a separate thread or use the current thread. Don't use this; might get removed without warning
max_bundle_size	string	Maximum number of bytes for messages to be queued until they are sent
message_processing_policy	string	The fully qualified name of a class implementing MessageProcessingPolicy
message_processing_policy.max_buffer_size	string	Max number of messages buffered for consumption of the delivery thread in MaxOneThreadPerSender. 0 creates an unbounded buffer
peer_addr_read_timeout	string	Max time to block on reading of peer address
port_range	string	The range of valid ports: [bind_port .. bind_port+port_range ]. 0 only binds to bind_port and fails if taken
reaper_interval	string	Reaper interval in msec. Default is 0 (no reaping)
receive_interfaces	string	Comma delimited list of interfaces (IP addresses or interface names) to receive multicasts on
receive_on_all_interfaces	string	If true, the transport should use all available interfaces to receive multicast messages
recv_buf_size	string	Receiver buffer size in bytes
send_buf_size	string	Send buffer size in bytes
sock_conn_timeout	string	Max time allowed for a socket creation in connection table
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
suppress_time_different_cluster_warnings	string	Time during which identical warnings about messages from a member from a different cluster will be suppressed. 0 disables this (every warning will be logged). Setting the log level to ERROR also disables this.
suppress_time_different_version_warnings	string	Time during which identical warnings about messages from a member with a different version will be suppressed. 0 disables this (every warning will be logged). Setting the log level to ERROR also disables this.
tcp_nodelay	string	Should TCP no delay flag be turned on
thread_naming_pattern	string	Thread naming pattern for threads in this channel. Valid values are "pcl": "p": includes the thread name, e.g. "Incoming thread-1", "UDP ucast receiver", "c": includes the cluster name, e.g. "MyCluster", "l": includes the local address of the current member, e.g. "192.168.5.1:5678"
thread_pool.enabled	string	Enable or disable the thread pool
thread_pool.keep_alive_time	string	Timeout in milliseconds to remove idle threads from pool
thread_pool.max_threads	string	Maximum thread pool size for the thread pool
thread_pool.min_threads	string	Minimum thread pool size for the thread pool
thread_pool.use_common_fork_join_pool	string	If true, the common fork-join pool will be used; otherwise a custom ForkJoinPool will be created
thread_pool.use_fork_join_pool	string	If enabled, a ForkJoinPool will be used rather than a ThreadPoolExecutor
time_service_interval	string	Interval (in ms) at which the time service updates its timestamp. 0 disables the time service
use_ip_addrs	string	Use IP addresses (IpAddressUUID) instead of UUIDs as addresses. This is currently not compatible with RELAY2: disable if RELAY2 is used.
who_has_cache_timeout	string	Timeout (in ms) to determine how long to wait until a request to fetch the physical address for a given logical address will be sent again. Subsequent requests for the same physical address will therefore be spaced at least who_has_cache_timeout ms apart

TCPGOSSIP

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
async_discovery	string	If true then the discovery is done on a separate timer thread. Should be set to true when discovery is blocking and/or takes more than a few milliseconds
async_discovery_use_separate_thread_per_request	string	If enabled, use a separate thread for every discovery request. Can be used with or without async_discovery
break_on_coord_rsp	string	Return from the discovery phase as soon as we have 1 coordinator response
discovery_rsp_expiry_time	string	Expiry time of discovery responses in ms
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
initial_hosts	string	Comma delimited list of hosts to be contacted for initial membership
level	string	logger level (see javadocs)
max_members_in_discovery_request	string	Max size of the member list shipped with a discovery request. If we have more, the mbrs field in the discovery request header is nulled and members return the entire membership, not individual members
max_rank_to_reply	string	The max rank of this member to respond to discovery requests, e.g. if max_rank_to_reply=2 in {A,B,C,D,E}, only A (rank 1) and B (rank 2) will reply. A value <= 0 means everybody will reply. This attribute is ignored if TP.use_ip_addrs is false.
num_discovery_runs	string	The number of times a discovery process is executed when finding initial members (https://issues.jboss.org/browse/JGRP-2317)
reconnect_interval	string	Interval (ms) by which a disconnected stub attempts to reconnect to the GossipRouter
return_entire_cache	string	Whether or not to return the entire logical-physical address cache mappings on a discovery request, or not.
send_cache_on_join	string	When a new node joins, and we have a static discovery protocol (TCPPING), then send the contents of the discovery cache to new and existing members if true (and we're the coord). Addresses JGRP-1903
sock_conn_timeout	string	Max time for socket creation. Default is 1000 msec
stagger_timeout	string	If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
use_disk_cache	string	If a persistent disk cache (PDC) is present, combine the discovery results with the contents of the disk cache before returning the results
use_nio	string	Whether to use blocking (false) or non-blocking (true) connections. If GossipRouter is used, this needs to be false; if GossipRouterNio is used, it needs to be true

TCPPING

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
async_discovery	string	If true then the discovery is done on a separate timer thread. Should be set to true when discovery is blocking and/or takes more than a few milliseconds
async_discovery_use_separate_thread_per_request	string	If enabled, use a separate thread for every discovery request. Can be used with or without async_discovery
break_on_coord_rsp	string	Return from the discovery phase as soon as we have 1 coordinator response
discovery_rsp_expiry_time	string	Expiry time of discovery responses in ms
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
initial_hosts	string	Comma delimited list of hosts to be contacted for initial membership. Ideally, all members should be listed. If this is not possible, send_cache_on_join and / or return_entire_cache can be set to true
level	string	logger level (see javadocs)
max_dynamic_hosts	string	max number of hosts to keep beyond the ones in initial_hosts
max_members_in_discovery_request	string	Max size of the member list shipped with a discovery request. If we have more, the mbrs field in the discovery request header is nulled and members return the entire membership, not individual members
max_rank_to_reply	string	The max rank of this member to respond to discovery requests, e.g. if max_rank_to_reply=2 in {A,B,C,D,E}, only A (rank 1) and B (rank 2) will reply. A value <= 0 means everybody will reply. This attribute is ignored if TP.use_ip_addrs is false.
num_discovery_runs	string	The number of times a discovery process is executed when finding initial members (https://issues.jboss.org/browse/JGRP-2317)
port_range	string	Number of additional ports to be probed for membership. A port_range of 0 does not probe additional ports. Example: initial_hosts=A[7800] port_range=0 probes A:7800, port_range=1 probes A:7800 and A:7801
return_entire_cache	string	Whether or not to return the entire logical-physical address cache mappings on a discovery request, or not.
send_cache_on_join	string	When a new node joins, and we have a static discovery protocol (TCPPING), then send the contents of the discovery cache to new and existing members if true (and we're the coord). Addresses JGRP-1903
stagger_timeout	string	If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
use_disk_cache	string	If a persistent disk cache (PDC) is present, combine the discovery results with the contents of the disk cache before returning the results

TCP_NIO2

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
bind_addr	string	The bind address which should be used by this transport. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL, NON_LOOPBACK, match-interface, match-host, match-address
bind_port	string	The port to which the transport binds. Default of 0 binds to any (ephemeral) port. See also port_range
bundler_capacity	string	The max number of elements in a bundler if the bundler supports size limitations
bundler_num_spins	string	Number of spins before a real lock is acquired
bundler_type	string	The type of bundler used ("ring-buffer", "transfer-queue" (default), "sender-sends" or "no-bundler") or the fully qualified classname of a Bundler implementation
bundler_wait_strategy	string	The wait strategy for a RingBuffer
client_bind_addr	string	The address of a local network interface which should be used by client sockets to bind to. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL and NON_LOOPBACK
client_bind_port	string	The local port a client socket should bind to. If 0, an ephemeral port will be picked.
conn_expire_time	string	Max time connection can be idle before being reaped (in ms)
copy_on_partial_write	string	If true, a partial write will make a copy of the data so a buffer can be reused
defer_client_bind_addr	string	If true, client sockets will not explicitly bind to bind_addr but will defer to the native socket
diag_enable_tcp	string	Use a TCP socket to listen for probe requests (ignored if enable_diagnostics is false)
diag_enable_udp	string	Use a multicast socket to listen for probe requests (ignored if enable_diagnostics is false)
diagnostics_addr	string	Multicast address for diagnostic probing. Used when diag_enable_udp is true
diagnostics_bind_addr	string	Bind address for diagnostic probing. Used when diag_enable_tcp is true
diagnostics_bind_interfaces	string	Comma delimited list of interfaces (IP addresses or interface names) that the diagnostics multicast socket should bind to
diagnostics_passcode	string	Authorization passcode for diagnostics. If specified every probe query will be authorized
diagnostics_port	string	Port for diagnostic probing. Default is 7500
diagnostics_port_range	string	The number of ports to be probed for an available port (TCP)
diagnostics_ttl	string	TTL of the diagnostics multicast socket
enable_diagnostics	string	Switch to enable diagnostic probing. Default is true
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
external_addr	string	Use "external_addr" if you have hosts on different networks, behind firewalls. On each firewall, set up a port forwarding rule (sometimes called "virtual server") to the local IP (e.g. 192.168.1.100) of the host then on each host, set "external_addr" TCP transport parameter to the external (public IP) address of the firewall.
external_port	string	Used to map the internal port (bind_port) to an external port. Only used if > 0
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
linger	string	SO_LINGER in msec. Default of -1 disables it
log_discard_msgs	string	whether or not warnings about messages from different groups are logged
log_discard_msgs_version	string	whether or not warnings about messages from members with a different version are discarded
logical_addr_cache_expiration	string	Time (in ms) after which entries in the logical address cache marked as removable can be removed. 0 never removes any entries (not recommended)
logical_addr_cache_max_size	string	Max number of elements in the logical address cache before eviction starts
logical_addr_cache_reaper_interval	string	Interval (in ms) at which the reaper task scans logical_addr_cache and removes entries marked as removable. 0 disables reaping.
loopback_copy	string	Whether or not to make a copy of a message before looping it back up. Don't use this; might get removed without warning
loopback_separate_thread	string	Loop back the message on a separate thread or use the current thread. Don't use this; might get removed without warning
max_bundle_size	string	Maximum number of bytes for messages to be queued until they are sent
max_send_buffers	string	The max number of outgoing messages that can get queued for a given peer connection (before dropping them). Most messages will ge retransmitted; this is mainly used at startup, e.g. to prevent dropped discovery requests or responses (sent unreliably, without retransmission).
message_processing_policy	string	The fully qualified name of a class implementing MessageProcessingPolicy
message_processing_policy.max_buffer_size	string	Max number of messages buffered for consumption of the delivery thread in MaxOneThreadPerSender. 0 creates an unbounded buffer
peer_addr_read_timeout	string	Max time to block on reading of peer address
port_range	string	The range of valid ports: [bind_port .. bind_port+port_range ]. 0 only binds to bind_port and fails if taken
reader_idle_time	string	Number of ms a reader thread on a given connection can be idle (not receiving any messages) until it terminates. New messages will start a new reader
reaper_interval	string	Reaper interval in msec. Default is 0 (no reaping)
receive_interfaces	string	Comma delimited list of interfaces (IP addresses or interface names) to receive multicasts on
receive_on_all_interfaces	string	If true, the transport should use all available interfaces to receive multicast messages
recv_buf_size	string	Receiver buffer size in bytes
send_buf_size	string	Send buffer size in bytes
sock_conn_timeout	string	Max time allowed for a socket creation in connection table
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
suppress_time_different_cluster_warnings	string	Time during which identical warnings about messages from a member from a different cluster will be suppressed. 0 disables this (every warning will be logged). Setting the log level to ERROR also disables this.
suppress_time_different_version_warnings	string	Time during which identical warnings about messages from a member with a different version will be suppressed. 0 disables this (every warning will be logged). Setting the log level to ERROR also disables this.
tcp_nodelay	string	Should TCP no delay flag be turned on
thread_naming_pattern	string	Thread naming pattern for threads in this channel. Valid values are "pcl": "p": includes the thread name, e.g. "Incoming thread-1", "UDP ucast receiver", "c": includes the cluster name, e.g. "MyCluster", "l": includes the local address of the current member, e.g. "192.168.5.1:5678"
thread_pool.enabled	string	Enable or disable the thread pool
thread_pool.keep_alive_time	string	Timeout in milliseconds to remove idle threads from pool
thread_pool.max_threads	string	Maximum thread pool size for the thread pool
thread_pool.min_threads	string	Minimum thread pool size for the thread pool
thread_pool.use_common_fork_join_pool	string	If true, the common fork-join pool will be used; otherwise a custom ForkJoinPool will be created
thread_pool.use_fork_join_pool	string	If enabled, a ForkJoinPool will be used rather than a ThreadPoolExecutor
time_service_interval	string	Interval (in ms) at which the time service updates its timestamp. 0 disables the time service
use_ip_addrs	string	Use IP addresses (IpAddressUUID) instead of UUIDs as addresses. This is currently not compatible with RELAY2: disable if RELAY2 is used.
who_has_cache_timeout	string	Timeout (in ms) to determine how long to wait until a request to fetch the physical address for a given logical address will be sent again. Subsequent requests for the same physical address will therefore be spaced at least who_has_cache_timeout ms apart

TRACE

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

TUNNEL

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
bind_addr	string	The bind address which should be used by this transport. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL, NON_LOOPBACK, match-interface, match-host, match-address
bind_port	string	The port to which the transport binds. Default of 0 binds to any (ephemeral) port. See also port_range
bundler_capacity	string	The max number of elements in a bundler if the bundler supports size limitations
bundler_num_spins	string	Number of spins before a real lock is acquired
bundler_type	string	The type of bundler used ("ring-buffer", "transfer-queue" (default), "sender-sends" or "no-bundler") or the fully qualified classname of a Bundler implementation
bundler_wait_strategy	string	The wait strategy for a RingBuffer
diag_enable_tcp	string	Use a TCP socket to listen for probe requests (ignored if enable_diagnostics is false)
diag_enable_udp	string	Use a multicast socket to listen for probe requests (ignored if enable_diagnostics is false)
diagnostics_addr	string	Multicast address for diagnostic probing. Used when diag_enable_udp is true
diagnostics_bind_addr	string	Bind address for diagnostic probing. Used when diag_enable_tcp is true
diagnostics_bind_interfaces	string	Comma delimited list of interfaces (IP addresses or interface names) that the diagnostics multicast socket should bind to
diagnostics_passcode	string	Authorization passcode for diagnostics. If specified every probe query will be authorized
diagnostics_port	string	Port for diagnostic probing. Default is 7500
diagnostics_port_range	string	The number of ports to be probed for an available port (TCP)
diagnostics_ttl	string	TTL of the diagnostics multicast socket
enable_diagnostics	string	Switch to enable diagnostic probing. Default is true
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
external_addr	string	Use "external_addr" if you have hosts on different networks, behind firewalls. On each firewall, set up a port forwarding rule (sometimes called "virtual server") to the local IP (e.g. 192.168.1.100) of the host then on each host, set "external_addr" TCP transport parameter to the external (public IP) address of the firewall.
external_port	string	Used to map the internal port (bind_port) to an external port. Only used if > 0
gossip_router_hosts	string	A comma-separated list of GossipRouter hosts, e.g. HostA[12001],HostB[12001]
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
log_discard_msgs	string	whether or not warnings about messages from different groups are logged
log_discard_msgs_version	string	whether or not warnings about messages from members with a different version are discarded
logical_addr_cache_expiration	string	Time (in ms) after which entries in the logical address cache marked as removable can be removed. 0 never removes any entries (not recommended)
logical_addr_cache_max_size	string	Max number of elements in the logical address cache before eviction starts
logical_addr_cache_reaper_interval	string	Interval (in ms) at which the reaper task scans logical_addr_cache and removes entries marked as removable. 0 disables reaping.
loopback_copy	string	Whether or not to make a copy of a message before looping it back up. Don't use this; might get removed without warning
loopback_separate_thread	string	Loop back the message on a separate thread or use the current thread. Don't use this; might get removed without warning
max_bundle_size	string	Maximum number of bytes for messages to be queued until they are sent
message_processing_policy	string	The fully qualified name of a class implementing MessageProcessingPolicy
message_processing_policy.max_buffer_size	string	Max number of messages buffered for consumption of the delivery thread in MaxOneThreadPerSender. 0 creates an unbounded buffer
port_range	string	The range of valid ports: [bind_port .. bind_port+port_range ]. 0 only binds to bind_port and fails if taken
receive_interfaces	string	Comma delimited list of interfaces (IP addresses or interface names) to receive multicasts on
receive_on_all_interfaces	string	If true, the transport should use all available interfaces to receive multicast messages
reconnect_interval	string	Interval in msec to attempt connecting back to router in case of torn connection. Default is 5000 msec
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
suppress_time_different_cluster_warnings	string	Time during which identical warnings about messages from a member from a different cluster will be suppressed. 0 disables this (every warning will be logged). Setting the log level to ERROR also disables this.
suppress_time_different_version_warnings	string	Time during which identical warnings about messages from a member with a different version will be suppressed. 0 disables this (every warning will be logged). Setting the log level to ERROR also disables this.
tcp_nodelay	string	Should TCP no delay flag be turned on
thread_naming_pattern	string	Thread naming pattern for threads in this channel. Valid values are "pcl": "p": includes the thread name, e.g. "Incoming thread-1", "UDP ucast receiver", "c": includes the cluster name, e.g. "MyCluster", "l": includes the local address of the current member, e.g. "192.168.5.1:5678"
thread_pool.enabled	string	Enable or disable the thread pool
thread_pool.keep_alive_time	string	Timeout in milliseconds to remove idle threads from pool
thread_pool.max_threads	string	Maximum thread pool size for the thread pool
thread_pool.min_threads	string	Minimum thread pool size for the thread pool
thread_pool.use_common_fork_join_pool	string	If true, the common fork-join pool will be used; otherwise a custom ForkJoinPool will be created
thread_pool.use_fork_join_pool	string	If enabled, a ForkJoinPool will be used rather than a ThreadPoolExecutor
time_service_interval	string	Interval (in ms) at which the time service updates its timestamp. 0 disables the time service
use_ip_addrs	string	Use IP addresses (IpAddressUUID) instead of UUIDs as addresses. This is currently not compatible with RELAY2: disable if RELAY2 is used.
use_nio	string	Whether to use blocking (false) or non-blocking (true) connections. If GossipRouter is used, this needs to be false; if GossipRouterNio is used, it needs to be true
who_has_cache_timeout	string	Timeout (in ms) to determine how long to wait until a request to fetch the physical address for a given logical address will be sent again. Subsequent requests for the same physical address will therefore be spaced at least who_has_cache_timeout ms apart

UDP

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
bind_addr	string	The bind address which should be used by this transport. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL, NON_LOOPBACK, match-interface, match-host, match-address
bind_port	string	The port to which the transport binds. Default of 0 binds to any (ephemeral) port. See also port_range
bundler_capacity	string	The max number of elements in a bundler if the bundler supports size limitations
bundler_num_spins	string	Number of spins before a real lock is acquired
bundler_type	string	The type of bundler used ("ring-buffer", "transfer-queue" (default), "sender-sends" or "no-bundler") or the fully qualified classname of a Bundler implementation
bundler_wait_strategy	string	The wait strategy for a RingBuffer
diag_enable_tcp	string	Use a TCP socket to listen for probe requests (ignored if enable_diagnostics is false)
diag_enable_udp	string	Use a multicast socket to listen for probe requests (ignored if enable_diagnostics is false)
diagnostics_addr	string	Multicast address for diagnostic probing. Used when diag_enable_udp is true
diagnostics_bind_addr	string	Bind address for diagnostic probing. Used when diag_enable_tcp is true
diagnostics_bind_interfaces	string	Comma delimited list of interfaces (IP addresses or interface names) that the diagnostics multicast socket should bind to
diagnostics_passcode	string	Authorization passcode for diagnostics. If specified every probe query will be authorized
diagnostics_port	string	Port for diagnostic probing. Default is 7500
diagnostics_port_range	string	The number of ports to be probed for an available port (TCP)
diagnostics_ttl	string	TTL of the diagnostics multicast socket
disable_loopback	string	If true, disables IP_MULTICAST_LOOP on the MulticastSocket (for sending and receiving of multicast packets). IP multicast packets send on a host P will therefore not be received by anyone on P. Use with caution.
enable_diagnostics	string	Switch to enable diagnostic probing. Default is true
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
external_addr	string	Use "external_addr" if you have hosts on different networks, behind firewalls. On each firewall, set up a port forwarding rule (sometimes called "virtual server") to the local IP (e.g. 192.168.1.100) of the host then on each host, set "external_addr" TCP transport parameter to the external (public IP) address of the firewall.
external_port	string	Used to map the internal port (bind_port) to an external port. Only used if > 0
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
ip_mcast	string	Multicast toggle. If false multiple unicast datagrams are sent instead of one multicast. Default is true
ip_ttl	string	The time-to-live (TTL) for multicast datagram packets. Default is 8
level	string	logger level (see javadocs)
log_discard_msgs	string	whether or not warnings about messages from different groups are logged
log_discard_msgs_version	string	whether or not warnings about messages from members with a different version are discarded
logical_addr_cache_expiration	string	Time (in ms) after which entries in the logical address cache marked as removable can be removed. 0 never removes any entries (not recommended)
logical_addr_cache_max_size	string	Max number of elements in the logical address cache before eviction starts
logical_addr_cache_reaper_interval	string	Interval (in ms) at which the reaper task scans logical_addr_cache and removes entries marked as removable. 0 disables reaping.
loopback_copy	string	Whether or not to make a copy of a message before looping it back up. Don't use this; might get removed without warning
loopback_separate_thread	string	Loop back the message on a separate thread or use the current thread. Don't use this; might get removed without warning
max_bundle_size	string	Maximum number of bytes for messages to be queued until they are sent
mcast_addr	string	The multicast address used for sending and receiving packets
mcast_port	string	The multicast port used for sending and receiving packets. Default is 7600
mcast_receiver_threads	string	Number of multicast receiver threads, all reading from the same MulticastSocket. If de-serialization is slow, increasing the number of receiver threads might yield better performance.
mcast_recv_buf_size	string	Receive buffer size of the multicast datagram socket. Default is 500'000 bytes
mcast_send_buf_size	string	Send buffer size of the multicast datagram socket. Default is 100'000 bytes
message_processing_policy	string	The fully qualified name of a class implementing MessageProcessingPolicy
message_processing_policy.max_buffer_size	string	Max number of messages buffered for consumption of the delivery thread in MaxOneThreadPerSender. 0 creates an unbounded buffer
port_range	string	The range of valid ports: [bind_port .. bind_port+port_range ]. 0 only binds to bind_port and fails if taken
receive_interfaces	string	Comma delimited list of interfaces (IP addresses or interface names) to receive multicasts on
receive_on_all_interfaces	string	If true, the transport should use all available interfaces to receive multicast messages
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
suppress_time_different_cluster_warnings	string	Time during which identical warnings about messages from a member from a different cluster will be suppressed. 0 disables this (every warning will be logged). Setting the log level to ERROR also disables this.
suppress_time_different_version_warnings	string	Time during which identical warnings about messages from a member with a different version will be suppressed. 0 disables this (every warning will be logged). Setting the log level to ERROR also disables this.
suppress_time_out_of_buffer_space	string	Suppresses warnings on Mac OS (for now) about not enough buffer space when sending a datagram packet
thread_naming_pattern	string	Thread naming pattern for threads in this channel. Valid values are "pcl": "p": includes the thread name, e.g. "Incoming thread-1", "UDP ucast receiver", "c": includes the cluster name, e.g. "MyCluster", "l": includes the local address of the current member, e.g. "192.168.5.1:5678"
thread_pool.enabled	string	Enable or disable the thread pool
thread_pool.keep_alive_time	string	Timeout in milliseconds to remove idle threads from pool
thread_pool.max_threads	string	Maximum thread pool size for the thread pool
thread_pool.min_threads	string	Minimum thread pool size for the thread pool
thread_pool.use_common_fork_join_pool	string	If true, the common fork-join pool will be used; otherwise a custom ForkJoinPool will be created
thread_pool.use_fork_join_pool	string	If enabled, a ForkJoinPool will be used rather than a ThreadPoolExecutor
time_service_interval	string	Interval (in ms) at which the time service updates its timestamp. 0 disables the time service
tos	string	Traffic class for sending unicast and multicast datagrams. Default is 8
ucast_receiver_threads	string	Number of unicast receiver threads, all reading from the same DatagramSocket. If de-serialization is slow, increasing the number of receiver threads might yield better performance.
ucast_recv_buf_size	string	Receive buffer size of the unicast datagram socket. Default is 64'000 bytes
ucast_send_buf_size	string	Send buffer size of the unicast datagram socket. Default is 100'000 bytes
use_ip_addrs	string	Use IP addresses (IpAddressUUID) instead of UUIDs as addresses. This is currently not compatible with RELAY2: disable if RELAY2 is used.
who_has_cache_timeout	string	Timeout (in ms) to determine how long to wait until a request to fetch the physical address for a given logical address will be sent again. Subsequent requests for the same physical address will therefore be spaced at least who_has_cache_timeout ms apart

UFC

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
max_block_time	string	Max time (in ms) to block
max_block_times	string	Max times to block for the listed messages sizes (Message.getLength()). Example: "1000:10,5000:30,10000:500"
max_credits	string	Max number of bytes to send per receiver until an ack must be received to proceed
min_credits	string	Computed as max_credits x min_theshold unless explicitly set
min_threshold	string	The threshold (as a percentage of max_credits) at which a receiver sends more credits to a sender. Example: if max_credits is 1'000'000, and min_threshold 0.25, then we send ca. 250'000 credits to P once we've got only 250'000 credits left for P (we've received 750'000 bytes from P)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

UFC_NB

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
max_block_time	string	Max time (in ms) to block
max_block_times	string	Max times to block for the listed messages sizes (Message.getLength()). Example: "1000:10,5000:30,10000:500"
max_credits	string	Max number of bytes to send per receiver until an ack must be received to proceed
max_queue_size	string	Max number of bytes of all queued messages for a given destination. If a given destination has no credits left and the message cannot be added to the queue because it is full, then the sender thread will be blocked until there is again space available in the queue, or the protocol is stopped.
min_credits	string	Computed as max_credits x min_theshold unless explicitly set
min_threshold	string	The threshold (as a percentage of max_credits) at which a receiver sends more credits to a sender. Example: if max_credits is 1'000'000, and min_threshold 0.25, then we send ca. 250'000 credits to P once we've got only 250'000 credits left for P (we've received 750'000 bytes from P)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

UNICAST3

Name	Type	Description
ack_threshold	string	Send an ack immediately when a batch of ack_threshold (or more) messages is received. Otherwise send delayed acks. If 1, ack single messages (similar to UNICAST)
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
conn_close_timeout	string	Time (in ms) until a connection marked to be closed will get removed. 0 disables this
conn_expiry_timeout	string	Time (in milliseconds) after which an idle incoming or outgoing connection is closed. The connection will get re-established when used again. 0 disables connection reaping. Note that this creates lingering connection entries, which increases memory over time.
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
log_not_found_msgs	string	If true, trashes warnings about retransmission messages not found in the xmit_table (used for testing)
max_retransmit_time	string	Max number of milliseconds we try to retransmit a message to any given member. After that, the connection is removed. Any new connection to that member will start with seqno #1 again. 0 disables this
max_xmit_req_size	string	Max number of messages to ask for in a retransmit request. 0 disables this and uses the max bundle size in the transport
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
sync_min_interval	string	Min time (in ms) to elapse for successive SEND_FIRST_SEQNO messages to be sent to the same sender
xmit_interval	string	Interval (in milliseconds) at which messages in the send windows are resent
xmit_table_max_compaction_time	string	Number of milliseconds after which the matrix in the retransmission table is compacted (only for experts)
xmit_table_msgs_per_row	string	Number of elements of a row of the matrix in the retransmission table; gets rounded to the next power of 2 (only for experts). The capacity of the matrix is xmit_table_num_rows * xmit_table_msgs_per_row
xmit_table_num_rows	string	Number of rows of the matrix in the retransmission table (only for experts)
xmit_table_resize_factor	string	Resize factor of the matrix in the retransmission table (only for experts)

VERIFY_SUSPECT

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
bind_addr	string	Interface for ICMP pings. Used if use_icmp is true The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL and NON_LOOPBACK
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
num_msgs	string	Number of verify heartbeats sent to a suspected member
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
timeout	string	Number of millisecs to wait for a response from a suspected member
use_icmp	string	Use InetAddress.isReachable() to verify suspected member instead of regular messages
use_mcast_rsps	string	Send the I_AM_NOT_DEAD message back as a multicast rather than as multiple unicasts (default is false)

pbcast.FLUSH

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
bypass	string	When set, FLUSH is bypassed, same effect as if FLUSH wasn't in the config at all
enable_reconciliation	string	Reconciliation phase toggle. Default is true
end_flush_timeout	string	Timeout to wait for UNBLOCK after STOP_FLUSH is issued. Default is 2000 msec
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
retry_timeout	string	Retry timeout after an unsuccessful attempt to quiet the cluster (first flush phase). Default is 3000 msec
start_flush_timeout	string	Timeout (per atttempt) to quiet the cluster during the first flush phase. Default is 2000 msec
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
timeout	string	Max time to keep channel blocked in flush. Default is 8000 msec

pbcast.GMS

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
install_view_locally_first	string	Whether or not to install a new view locally first before broadcasting it (only done at the coord ). Set to true automatically if a state transfer protocol is detected
join_timeout	string	Join timeout
leave_timeout	string	Leave timeout
level	string	logger level (see javadocs)
log_collect_msgs	string	Logs failures for collecting all view acks if true
log_view_warnings	string	Logs warnings for reception of views less than the current, and for views which don't include self
max_bundling_time	string	Max view bundling timeout if view bundling is turned on
max_join_attempts	string	Number of join attempts before we give up and become a singleton. 0 means 'never give up'.
membership_change_policy	string	The fully qualified name of a class implementing MembershipChangePolicy.
merge_timeout	string	Timeout (in ms) to complete merge
num_prev_mbrs	string	Max number of old members to keep in history. Default is 50
num_prev_views	string	Number of views to store in history
print_local_addr	string	Print local address of this member after connect. Default is true
print_physical_addrs	string	Print physical address(es) on startup
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
use_delta_views	string	If true, then GMS is allowed to send VIEW messages with delta views, otherwise it always sends full views. See https://issues.jboss.org/browse/JGRP-1354 for details.
use_flush_if_present	string	Use flush for view changes. Default is true
view_ack_collection_timeout	string	Time in ms to wait for all VIEW acks (0 == wait forever. Default is 2000 msec
view_bundling	string	View bundling toggle

pbcast.NAKACK2

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
become_server_queue_size	string	Size of the queue to hold messages received after creating the channel, but before being connected (is_server=false). After becoming the server, the messages in the queue are fed into up() and the queue is cleared. The motivation is to avoid retransmissions (see https://issues.jboss.org/browse/JGRP-1509 for details). 0 disables the queue.
discard_delivered_msgs	string	Should messages delivered to application be discarded
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
log_discard_msgs	string	discards warnings about promiscuous traffic
log_not_found_msgs	string	If false, trashes warnings about retransmission messages not found in the xmit_table (used for testing)
max_rebroadcast_timeout	string	Timeout to rebroadcast messages. Default is 2000 msec
max_xmit_req_size	string	Max number of messages to ask for in a retransmit request. 0 disables this and uses the max bundle size in the transport
resend_last_seqno	string	If enabled, multicasts the highest sent seqno every xmit_interval ms. This is skipped if a regular message has been multicast, and the task aquiesces if the highest sent seqno hasn't changed for resend_last_seqno_max_times times. Used to speed up retransmission of dropped last messages (JGRP-1904)
resend_last_seqno_max_times	string	Max number of times the last seqno is resent before acquiescing if last seqno isn't incremented
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
suppress_time_non_member_warnings	string	Time during which identical warnings about messages from a non member will be suppressed. 0 disables this (every warning will be logged). Setting the log level to ERROR also disables this.
use_mcast_xmit	string	Retransmit retransmit responses (messages) using multicast rather than unicast
use_mcast_xmit_req	string	Use a multicast to request retransmission of missing messages
xmit_from_random_member	string	Ask a random member for retransmission of a missing message. Default is false
xmit_interval	string	Interval (in milliseconds) at which missing messages (from all retransmit buffers) are retransmitted
xmit_table_max_compaction_time	string	Number of milliseconds after which the matrix in the retransmission table is compacted (only for experts)
xmit_table_msgs_per_row	string	Number of elements of a row of the matrix in the retransmission table; gets rounded to the next power of 2 (only for experts). The capacity of the matrix is xmit_table_num_rows * xmit_table_msgs_per_row
xmit_table_num_rows	string	Number of rows of the matrix in the retransmission table (only for experts)
xmit_table_resize_factor	string	Resize factor of the matrix in the retransmission table (only for experts)

pbcast.STABLE

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
desired_avg_gossip	string	Average time to send a STABLE message
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
max_bytes	string	Maximum number of bytes received in all messages before sending a STABLE message is triggered
send_stable_msgs_to_coord_only	string	Wether or not to send the STABLE messages to all members of the cluster, or to the current coordinator only. The latter reduces the number of STABLE messages, but also generates more work on the coordinator
stability_delay	string	Delay before stability message is sent
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

pbcast.STATE

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
buffer_size	string	Size (in bytes) of the state transfer buffer
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
max_pool	string	Maximum number of pool threads serving state requests
pool_thread_keep_alive	string	Keep alive for pool threads serving state requests
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

pbcast.STATE_SOCK

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
bind_addr	string	The interface (NIC) used to accept state requests. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL and NON_LOOPBACK
bind_interface	string	The interface (NIC) which should be used by this transport
bind_port	string	The port listening for state requests. Default value of 0 binds to any (ephemeral) port
buffer_size	string	Size (in bytes) of the state transfer buffer
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
external_addr	string	Use "external_addr" if you have hosts on different networks, behind firewalls. On each firewall, set up a port forwarding rule (sometimes called "virtual server") to the local IP (e.g. 192.168.1.100) of the host then on each host, set "external_addr" TCP transport parameter to the external (public IP) address of the firewall.
external_port	string	Used to map the internal port (bind_port) to an external port. Only used if > 0
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
max_pool	string	Maximum number of pool threads serving state requests
pool_thread_keep_alive	string	Keep alive for pool threads serving state requests
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

pbcast.STATE_TRANSFER

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

tom.TOA

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

relay.RELAY2

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
async_relay_creation	string	If true, the creation of the relay channel (and the connect()) are done in the background. Async relay creation is recommended, so the view callback won't be blocked
can_become_site_master	string	Whether or not this node can become the site master. If false, and we become the coordinator, we won't start the bridge(s)
can_forward_local_cluster	string	If true, a site master forwards messages received from other sites to randomly chosen members of the local site for load balancing, reducing work for itself
config	string	Name of the relay configuration
enable_address_tagging	string	Whether or not we generate our own addresses in which we use can_become_site_master. If this property is false, can_become_site_master is ignored
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
max_site_masters	string	Maximum number of site masters. Setting this to a value greater than 1 means that we can have multiple site masters. If the value is greater than the number of cluster nodes, everyone in the site will be a site master (and thus join the global cluster
relay_multicasts	string	Whether or not to relay multicast (dest=null) messages
site	string	Name of the site (needs to be defined in the configuration)
site_master_picker_impl	string	Fully qualified name of a class implementing SiteMasterPicker
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
warn_when_ftc_missing	string	If true, logs a warning if the FORWARD_TO_COORD protocol is not found. This property might get deprecated soon

RelayConfiguration

rules.SUPERVISOR

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
config	string	Location of an XML file listing the rules to be installed
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true

dns.DNS_PING

Name	Type	Description
after_creation_hook	string	Fully qualified name of a class implementing ProtocolHook, will be called after creation of the protocol (before init())
async_discovery	string	If true then the discovery is done on a separate timer thread. Should be set to true when discovery is blocking and/or takes more than a few milliseconds
async_discovery_use_separate_thread_per_request	string	If enabled, use a separate thread for every discovery request. Can be used with or without async_discovery
break_on_coord_rsp	string	Return from the discovery phase as soon as we have 1 coordinator response
discovery_rsp_expiry_time	string	Expiry time of discovery responses in ms
dns_address	string	DNS Address. This property will be assembled with the 'dns://' prefix. If this is specified, A records will be resolved through DnsContext.
dns_context_factory	string	DNS Context Factory. Used when DNS_PING is configured to use SRV record types and when using A types with a specific dns_address.
dns_query	string	DNS query for fetching members
dns_record_type	string	DNS Record type
ergonomics	string	Enables ergonomics: dynamically find the best values for properties at runtime
id	string	Give the protocol a different ID if needed so we can have multiple instances of it in the same stack
level	string	logger level (see javadocs)
max_members_in_discovery_request	string	Max size of the member list shipped with a discovery request. If we have more, the mbrs field in the discovery request header is nulled and members return the entire membership, not individual members
max_rank_to_reply	string	The max rank of this member to respond to discovery requests, e.g. if max_rank_to_reply=2 in {A,B,C,D,E}, only A (rank 1) and B (rank 2) will reply. A value <= 0 means everybody will reply. This attribute is ignored if TP.use_ip_addrs is false.
num_discovery_runs	string	The number of times a discovery process is executed when finding initial members (https://issues.jboss.org/browse/JGRP-2317)
probe_transport_ports	string	For SRV records returned by the DNS query, the non-0 ports returned by DNS areused. If this attribute is true, then the transport ports will also be used. Ignored for A records.
return_entire_cache	string	Whether or not to return the entire logical-physical address cache mappings on a discovery request, or not.
send_cache_on_join	string	When a new node joins, and we have a static discovery protocol (TCPPING), then send the contents of the discovery cache to new and existing members if true (and we're the coord). Addresses JGRP-1903
stagger_timeout	string	If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time
stats	string	Determines whether to collect statistics (and expose them via JMX). Default is true
use_disk_cache	string	If a persistent disk cache (PDC) is present, combine the discovery results with the contents of the disk cache before returning the results

threads?

Defines the threading subsystem.

The threading subsystem, used to declare manageable thread pools and resources.

thread-factory*

A thread factory (implementing java.util.concurrent.ThreadFactory). The "name" attribute is the bean name of the created thread factory. The optional "priority" attribute may be used to specify the thread priority of created threads. The optional "group-name" attribute specifies the name of a the thread group to create for this thread factory. The "thread-name-pattern" is the template used to create names for threads. The following patterns may be used: %% - emit a percent sign %t - emit the per-factory thread sequence number %g - emit the global thread sequence number %f - emit the factory sequence number %i - emit the thread ID %G - emit the thread group name

Name	Type	Default	Description
name	string
group-name	string
thread-name-pattern	string
priority	string

blocking-bounded-queue-thread-pool*

A thread pool executor with a bounded queue. Such a thread pool has a core size and a queue with an upper bound. When a task is submitted, if the number of running threads is less than the core size, a new thread is created. Otherwise, the task is placed in queue. If too many tasks are allowed to be submitted to this type of executor, an out of memory condition may occur. The "name" attribute is the bean name of the created executor. The "max-threads" attribute must be used to specify the maximum thread pool size. The "core-threads" attribute defines the number of threads to keep in the pool. The nested "keepalive-time" element may used to specify the amount of time that pool threads should be kept running when idle; if not specified, threads will run until the executor is shut down. The "thread-factory" element specifies the bean name of a specific thread factory to use to create worker threads.

Name	Type	Default	Description
name	string
thread-factory	string
max-threads	int
core-threads	int
keepalive-time	string
queue-length	string

cached-thread-pool*

A thread pool executor that creates new threads as needed, but will reuse previously constructed threads when they are available. The "name" attribute is the bean name of the created executor. The "thread-factory" element specifies the bean name of a specific thread factory to use to create worker threads.

Name	Type	Default	Description
name	string
thread-factory	string

scheduled-thread-pool*

A thread pool executor that creates a single-threaded executor that can schedule commands to run after a given delay, or to execute periodically. The "name" attribute is the bean name of the created executor. The "thread-factory" element specifies the bean name of a specific thread factory to use to create worker threads.

Name	Type	Default	Description
name	string
thread-factory	string

cache-container

Defines an embedded cache container.

Name

Type

Default

Description

name

string

Uniquely identifies this cache container.

aliases

Unused XML attribute

jndi-name

string

Unused XML attribute

default-cache

string

Indicates the default cache for this cache container

zero-capacity-node

boolean

false

If 'true' then no data is stored in this node. Defaults to 'false'.

start

FIXME

Unused XML attribute

async-executor

string

Defines the executor used for asynchronous cache operations.

listener-executor

string

Defines the executor used for asynchronous cache listener notifications.

eviction-executor

string

DEPRECATED Defines the scheduled executor used for evictions. The expiration-executor type should be used instead.

expiration-executor

string

Defines the scheduled executor used for expirations.

persistence-executor

string

Configuration for the executor service used when interacting with the persistent store.

state-transfer-executor

string

Deprecated since 10.1, no longer used. Configuration for the executor service used when applying state from other nodes during the state transfer.

module

string

org.jboss.as.clustering.infinispan

Unused XML attribute

statistics

boolean

false

Determines whether or not the cache container should collect statistics. Keep disabled for optimal performance.

shutdown-hook

DEFAULT	Use the default shutdown hook behaviour (REGISTER)
REGISTER	Register a shutdown hook
DONT_REGISTER	Don't register a shutdown hook

Behavior of the JVM shutdown hook registered by the cache

transport?

Overrides the transport characteristics for this cache container.

Name	Type	Default	Description
stack	string		Defines the jgroups stack used by the transport.
cluster	string		Defines the name for the underlying group communication cluster.
executor	string		Defines the executor used for asynchronous transport communication.
remote-command-executor	string		Configuration for the executor service used to execute remote commands. Use org.infinispan.executors.WithinThreadExecutorFactory to disable.
lock-timeout	long	240000	Infinispan uses a distributed lock to maintain a coherent transaction log during state transfer or rehashing, which means that only one cache can be doing state transfer or rehashing at the same time. This constraint is in place because more than one cache could be involved in a transaction. This timeout controls the time to wait to acquire a distributed lock.
node-name	string		Name of the current node. This is a friendly name to make logs, etc. make more sense. Defaults to a combination of host name and a random number (to differentiate multiple nodes on the same host)
machine	string		The id of the machine where this node runs.
rack	string		The id of the rack where this node runs.
site	string		The id of the site where this node runs.
initial-cluster-size	int		The minimum number of nodes that must join the cluster for the cache manager to start
initial-cluster-timeout	long		The amount of time in milliseconds to wait for a cluster with sufficient nodes to form. Defaults to 60000

security?

Configures security for this cache container.

authorization?

Configures the global authorization role to permission mapping. The presence of this element in the configuration implicitly enables authorization.

Name	Type	Default	Description
audit-logger	string		Class of the audit logger.

identity-role-mapper

Uses the identity role mapper where principal names are converted as-is into role names.

common-name-role-mapper

Uses the common name role mapper which assumes principal names are in Distinguished Name format and extracts the Common Name to use as a role

cluster-role-mapper

Uses the cluster role mapper which stores the principal to role mappings within the cluster registry.

custom-role-mapper

Uses a custom role mapper.

Name	Type	Default	Description
class	string		Class of the custom principal to role mapper

role*

Defines a new role name and assigns permissions to it.

Name

Type

Default

Description

name

string

Defines the name of the role.

permissions

LIFECYCLE	Allows control of a cache's lifecycle (i.e. starting and stopping a cache)
READ	Allows reading data from a cache
WRITE	Allows writing data to a cache
EXEC	Allows performing task execution (e.g. distributed executors, map/reduce) on a cache
LISTEN	Allows attaching listeners to a cache
BULK_READ	Allows bulk-read operations (e.g. obtaining all the keys in a cache)
BULK_WRITE	Allows bulk-write operations (e.g. clearing a cache)
ADMIN	Allows performing "administrative" operations on a cache
ALL	Aggregate permission which implies all of the others
ALL_READ	Aggregate permission which implies all read permissions (READ and BULK_READ)
ALL_WRITE	Aggregate permission which implies all write permissions (WRITE and BULK_WRITE)
NONE	Permission which means no permissions

Defines the list of permissions for the role.

serialization?

Specifies how data serialization will be performed by the cache container.

Name	Type	Default	Description
marshaller	string		Fully qualified name of the marshaller to use. It must implement org.infinispan.marshall.StreamingMarshaller
version	string	71	Largest allowable version to use when marshalling internal state. Set this to the lowest version cache instance in your cluster to ensure compatibility of communications. However, setting this too low will mean you lose out on the benefit of improvements in newer versions of the marshaller.

advanced-externalizer*

Deprecated since 10.0. Please utilise ProtoStream based marshalling for your Java objects by configuring one or more context-initializer elements. Alternatively, it's possible to configure a custom org.infinispan.commons.marshall.Marshaller implementation for user types, via the "marshaller" attribute. AdvancedExternalizer implementations allow users to have fine grained control over how Java objects are serialized. Providing smaller payloads than traditional Serialization or Externalizer implementations by writing a class ID value instead of the classes FQN.

Name	Type	Default	Description
class	string		Class of the custom externalizer
id	int		Id of the custom externalizer

context-initializer*

SerializationContextInitializer implementation which is used to initialize a Protostream based marshaller for user types.

Name	Type	Default	Description
class	string		Class of the SerializationContextInitializer implementation

white-list?

Enables individual classes or regular expressions to be added to the EmbeddedCacheManager white list.

class*

FQN of the class to be added to the whitelist.

regex*

Regex pattern used to determine if a class is a member of the whitelist.

metrics?

Configures MicroProfile metrics.

Name	Type	Default	Description
gauges	boolean	true	Exports gauge metrics. Gauges are enabled by default but you must enable statistics so that they are exported.
histograms	boolean	false	Exports histogram metrics. Histograms are not enabled by default because they require additional computation. If you enable histograms you must also enable statistics so that they are exported.
prefix	string		Specifies a global name prefix for metrics.
namesAsTags	boolean	false	Put the cache manager and cache name in tags rather then include them in the metric name.

jmx?

Enables and configures JMX monitoring and management.

Name	Type	Default	Description
domain	string	org.infinispan	If JMX statistics are enabled then all 'published' JMX objects appear under this domain. Optional, if not specified it defaults to "org.infinispan".
mbean-server-lookup	string		Class that attempts to locate a JMX MBean server to bind to. Defaults to the platform MBean server.
duplicate-domains	boolean	true	Deprecated since 10.1; please set a unique domain or cache manager name instead. If true, multiple cache manager instances could be configured under the same configured JMX domain. Each cache manager will in practice use a different JMX domain that has been calculated based on the configured one by adding an incrementing index to it.
enabled	boolean	false	Enables exporting of JMX MBeans.

property*

Specifies a JMX property with a name and value that is passed to the MBean Server lookup instance.

global-state?

Defines the global state persistence configuration. If this element is not present, global state persistence will be disabled.

persistent-location?

Defines the filesystem path where persistent state data which needs to survive container restarts should be stored. The data stored at this location is required for graceful shutdown and restore. This path must NOT be shared among multiple instances. Defaults to the user.dir system property which usually is where the application was started. This value should be overridden to a more appropriate location.

Name	Type	Default	Description
relative-to	string	jboss.server.data.dir	A property name whose value will be used as the root path for storing global state
path	string		Defines the path where global state for this cache-container will be stored.

shared-persistent-location?

Defines the filesystem path where shared persistent state data which needs to survive container restarts should be stored. This path can be safely shared among multiple instances. Defaults to the user.dir system property which usually is where the application was started. This value should be overridden to a more appropriate location.

Name	Type	Default	Description
relative-to	string	jboss.server.data.dir	A property name whose value will be used as the root path for storing global state
path	string		Defines the path where global state for this cache-container will be stored.

temporary-location?

Defines the filesystem path where temporary state should be stored. Defaults to the value of the java.io.tmpdir system property.

Name	Type	Default	Description
relative-to	string	jboss.server.data.dir	A property name whose value will be used as the root path for storing global state
path	string		Defines the path where global state for this cache-container will be stored.

immutable-configuration-storage

An immutable configuration storage.

volatile-configuration-storage

A non-persistent configuration storage.

overlay-configuration-storage

A persistent configuration storage which saves runtime configurations to the persistent-location.

managed-configuration-storage

A persistent configuration storage for managed environments. This doesn't work in embedded mode.

custom-configuration-storage

Uses a custom configuration storage implementation.

Name	Type	Default	Description
class	string		Class of the custom configuration storage implementation.

local-cache

Defines a LOCAL mode cache.

Name	Type	Default	Description
simple-cache	FIXME	false	This cache will be using optimized (faster) implementation that does not support transactions/invocation batching, persistence, custom interceptors, indexing, store-as-binary or transcoding. Also, this type of cache does not support Map-Reduce jobs or Distributed Executor framework.

Name	Type	Default	Description
name	ID		Uniquely identifies this cache within its cache container.
configuration	IDREF		The name of the cache configuration which this configuration inherits from.
start	FIXME		Unused XML attribute
jndi-name	string		Unused XML attribute
module	string		Unused XML attribute
statistics	boolean	false	Determines whether or not the cache should collect statistics. Keep disabled for optimal performance.
statistics-available	boolean	true	If set to false, statistics gathering cannot be enabled during runtime. Keep disabled for optimal performance.
unreliable-return-values	boolean	false	Specifies whether Infinispan is allowed to disregard the Map contract when providing return values for org.infinispan.Cache#put(Object, Object) and org.infinispan.Cache#remove(Object) methods.

backups?

Defines backup locations for cache data and modifies state transfer properties.

backup*

Configures a remote site as a backup location for cache data.

Name

Type

Default

Description

site

string

Names the remote site to which the cache backs up data.

strategy

ASYNC	Enables asynchronous mode.
SYNC	Enables synchronous mode.

ASYNC

Sets the strategy for backing up to a remote site.

failure-policy

IGNORE	Ignore failed backup operations and write to the local cache.
WARN	Log exceptions when backup operations fail and write to the local cache.
FAIL	Throw exceptions when backup operations fail and attempt to stop writes to the local cache.
CUSTOM	Use a custom failure policy. Requires the "failure-policy-class" attribute.

WARN

Controls how local writes to caches are handled if synchronous backup operations fail.

timeout

long

15000

Specifies timeout, in milliseconds, for synchronous and asynchronous backup operations.

enabled

boolean

true

Enables backup locations. Set the value to "false" to disable backups.

two-phase-commit

boolean

false

Enables two-phase commits for optimistic transactional caches with the synchronous backup strategy only.

failure-policy-class

string

Specifies the fully qualified name of a class that implements the CustomFailurePolicy interface. Use if failure-policy="CUSTOM".

take-offline?

Specifies the number of failures that can occur before backup locations go offline.

Name	Type	Default	Description
after-failures	int	0	Sets the number of consecutive failures that can occur for backup operations before sites go offline. Specify a negative or zero value to ignore this attribute and use minimum wait time only ("min-wait").
min-wait	long	0	Sets the minimum time to wait, in milliseconds, before sites go offline when backup operations fail. If subsequent operations are successful, the minimum wait time is reset. If you set "after-failures", sites go offline when the wait time is reached and the number of failures occur.

state-transfer?

Modifies state transfer operations.

Name	Type	Default	Description
chunk-size	int	512	Specifies how many cache entries are batched in each transfer request.
timeout	long	1200000	The time (in milliseconds) to wait for the backup site acknowledge the state chunk received and applied. Default value is 20 min.
max-retries	int	30	Sets the maximum number of retry attempts for push state failures. Specify a value of 0 (zero) to disable retry attempts. The default value is 30.
wait-time	long	2000	Sets the amount of time, in milliseconds, to wait between retry attempts for push state failures. You must specify a value of 1 or more. The default value is 2000.

backup-for?

Defines the local cache as a backup for a remote cache with a different name.

Name	Type	Default	Description
remote-cache	string		Specifies the name of the remote cache that uses the local cache as a backup.
remote-site	string		Specifies the name of the remote site that backs up data to the local cache.

encoding?

The cache encoding configuration.

Defines content type and encoding for keys and values of the cache.

key

Describes the content-type and encoding.

Name	Type	Default	Description
media-type	string

value

Describes the content-type and encoding.

Name	Type	Default	Description
media-type	string

locking?

The locking configuration of the cache.

Name

Type

Default

Description

isolation

NONE	No locking isolation will be performed. This is only valid in local mode. In clustered mode, READ_COMMITTED will be used instead.
READ_UNCOMMITTED	Unsupported. Actually configures READ_COMMITTED
READ_COMMITTED	Read committed is an isolation level that guarantees that any data read is committed at the moment it is read. However, depending on the outcome of other transactions, successive reads may return different results
REPEATABLE_READ	Repeatable read is an isolation level that guarantees that any data read is committed at the moment it is read and that, within a transaction, successive reads will always return the same data.
SERIALIZABLE	Unsupported. Actually configures REPEATABLE_READ

REPEATABLE_READ

Sets the cache locking isolation level. Infinispan only supports READ_COMMITTED or REPEATABLE_READ isolation level.

striping

boolean

false

If true, a pool of shared locks is maintained for all entries that need to be locked. Otherwise, a lock is created per entry in the cache. Lock striping helps control memory footprint but may reduce concurrency in the system.

acquire-timeout

long

10000

Maximum time to attempt a particular lock acquisition.

concurrency-level

int

Concurrency level for lock containers. Adjust this value according to the number of concurrent threads interacting with Infinispan.

transaction?

The cache transaction configuration.

Name

Type

Default

Description

mode

NONE	Cache will not enlist within transactions.
BATCH	Uses batching to group cache operations together.
NON_XA	Cache will enlist within transactions as a javax.transaction.Synchronization
NON_DURABLE_XA	Cache will enlist within transactions as a javax.transaction.xa.XAResource, without recovery.
FULL_XA	Cache will enlist within transactions as a javax.transaction.xa.XAResource, with recovery.

NONE

Sets the cache transaction mode to one of NONE, BATCH, NON_XA, NON_DURABLE_XA, FULL_XA.

stop-timeout

long

30000

If there are any ongoing transactions when a cache is stopped, Infinispan waits for ongoing remote and local transactions to finish. The amount of time to wait for is defined by the cache stop timeout.

locking

OPTIMISTIC	Enables Optimistic locking.
PESSIMISTIC	Enables Pessimistic locking.

OPTIMISTIC

The locking mode for this cache, one of OPTIMISTIC or PESSIMISTIC.

transaction-manager-lookup

string

org.infinispan.transaction.lookup.GenericTransactionManagerLookup

Configure Transaction manager lookup directly using an instance of TransactionManagerLookup. Calling this method marks the cache as transactional.

complete-timeout

long

60000

The duration (millis) in which to keep information about the completion of a transaction. Defaults to 60000.

reaper-interval

long

30000

The time interval (millis) at which the thread that cleans up transaction completion information kicks in. Defaults to 30000.

auto-commit

boolean

true

If the cache is transactional and transactionAutoCommit is enabled then for single operation transactions the user doesn't need to manually start a transaction, but a transactions is injected by the system. Defaults to true.

protocol

DEFAULT
TOTAL_ORDER

(Deprecated, Total Order will be removed) Configures the commit protocol to use.

recovery-cache

string

__recoveryInfoCacheName__

Sets the name of the cache where recovery related information is held. The cache's default name is "__recoveryInfoCacheName__"

notifications

boolean

true

Enables or disables triggering transactional notifications on cache listeners. By default is enabled.

expiration?

The cache expiration configuration.

Name	Type	Default	Description
max-idle	long	-1	Specifies the maximum amount of time, in milliseconds, that cache entries can remain idle. If no operations are performed on entries within the maximum idle time, the entries expire across the cluster. A value of 0 or -1 disables expiration.
lifespan	long	-1	Specifies the maximum amount of time, in milliseconds, that cache entries can exist. After reaching their lifespan, cache entries expire across the cluster. A value of 0 or -1 disables expiration.
interval	long	60000	Specifies the interval, in milliseconds, between expiration runs. A value of 0 or -1 disables the expiration reaper.

store-as-binary?

Configures the cache to store data in binary format.

Controls whether when stored in memory, keys and values are stored as references to their original objects, or in a serialized, binary format. There are benefits to both approaches, but often if used in a clustered mode, storing objects as binary means that the cost of serialization happens early on, and can be amortized. Further, deserialization costs are incurred lazily which improves throughput. It is possible to control this on a fine-grained basis: you can choose to just store keys or values as binary, or both. DEPRECATED: please use memory element instead

Name	Type	Default	Description
keys	boolean		Specify whether keys are stored as binary or not. Enabled by default if the "enabled" attribute is set to true.
values	boolean		Specify whether values are stored as binary or not. Enabled by default if the "enabled" attribute is set to true.

persistence?

Configures the persistence layer for caches.

Name	Type	Default	Description
passivation	boolean	false	Enables passivation so that data is written to cache stores only if it is evicted from memory. Subsequent requests for passivated entries restore them to memory and remove them from persistent storage. If you do not enable passivation, writes to entries in memory result in writes to cache stores.
connection-attempts	int	10	Sets the maximum number of attempts to start each configured `CacheWriter` or `CacheLoader`. An exception is thrown and the cache does not start if the number of connection attempts exceeds the maximum.
connection-interval	int	50	Specifies the time, in milliseconds, to wait between connection attempts on startup. A negative or zero value means no wait between connection attempts.
availability-interval	int	1000	Specifies the time, in milliseconds, between availability checks to determine if the PersistenceManager is available. In other words, this interval sets how often stores and loaders are polled via their `org.infinispan.persistence.spi.CacheWriter#isAvailable` or `org.infinispan.persistence.spi.CacheLoader#isAvailable` implementation. If a single store or loader is not available, an exception is thrown during cache operations.

cluster-loader

Defines a cluster cache loader.

Name	Type	Default	Description
remote-timeout	long	15000	The timeout when performing remote calls.

Name	Type	Default	Description
name	string		Unused XML attribute.
shared	boolean	false	Determines if a cache loader is shared between cache instances. Values are true / false (default). This property prevents duplicate writes of data to the cache loader by different cache instances. An example is where all cache instances in a cluster use the same JDBC settings for the same remote, shared database. If true, only the nodes where modifications originate write to the cache store. If false, each cache reacts to potential remote updates by storing the data to the cache store.
preload	boolean	false	Pre-loads data into memory from the cache loader when the cache starts. Values are true / false (default). This property is useful when data in the cache loader is required immediately after startup to prevent delays with cache operations when the data is loaded lazily. This property can provide a "warm cache" on startup but it impacts performance because it affects start time. Pre-loading data is done locally, so any data loaded is stored locally in the node only. Pre-loaded data is not replicated or distributed. Likewise, data is pre-loaded only up to the maximum configured number of entries in eviction.

property*

A cache loader property with name and value.

store

Defines a custom cache store.

Name	Type	Default	Description
class	string		Defines the class name of a cache store that implements either `CacheLoader`, `CacheWriter`, or both.

Name	Type	Default	Description
shared	boolean	false	This setting should be set to true when multiple cache instances share the same cache store (e.g., multiple nodes in a cluster using a JDBC-based CacheStore pointing to the same, shared database.) Setting this to true avoids multiple cache instances writing the same modification multiple times. If enabled, only the node where the modification originated will write to the cache store. If disabled, each individual cache reacts to a potential remote update by storing the data to the cache store.
transactional	boolean	false	This setting should be set to true when the underlying cache store supports transactions and it is desirable for the underlying store and the cache to remain synchronized. With this enabled any Exceptions thrown whilst writing to the underlying store will result in both the store's and cache's transactions rollingback.
preload	boolean	false	If true, when the cache starts, data stored in the cache store will be pre-loaded into memory. This is particularly useful when data in the cache store will be needed immediately after startup and you want to avoid cache operations being delayed as a result of loading this data lazily. Can be used to provide a 'warm-cache' on startup, however there is a performance penalty as startup time is affected by this process.
fetch-state	boolean	false	Fetches the persistent state of a cache when joining a cluster. Values are true / false (default). The purpose of this property is to retrieve the persistent state of a cache and apply it to the local cache store of a node when it joins a cluster. Fetching the persistent state does not apply if a cache store is shared because it accesses the same data as the other stores. This property can be `true` for one configured cache loader only. If more than one cache loader fetches the persistent state, a configuration exception is thrown when the cache service starts.
purge	boolean	false	Empties the specified cache loader at startup. Values are true / false (default). This property takes effect only if read-only is false.
read-only	boolean	false	Prevents data from being persisted to cache stores. Values are true / false (default). If true, cache stores load entries only. Any modifications to data in the cache do not apply to cache stores.
max-batch-size	int	100	Sets the maximum size of a batch to insert or delete from the cache store. If the value is less than one, no upper limit applies to the number of operations in a batch.
segmented	boolean	true	Configures cache stores to store data in hash space segments, with the "hash.numSegments" property defining the number of segments.

write-behind?

Configures cache stores as write-behind instead of write-through.

Name	Type	Default	Description
modification-queue-size	int	1024	Specifies the maximum number of entries in the asynchronous modification queue. When the queue is full, write-through mode is used until the queue can accept new entries.
thread-pool-size	int	1	Specifies the number of threads to apply modifications to the cache store.
fail-silently	boolean	false	Controls how asynchronous write operations take place when cache stores become unavailable. If "true", asynchronous write operations that fail are re-attempted with the number of times specified in the "connection-attempts" parameter. If all attempts fail, errors are ignored and write operations are not executed on the cache store. If "false", asynchronous write operations that fail are re-attempted when the underlying store becomes available. If the modification queue becomes full before the underlying store becomes available, an error is thrown on all future write operations to the store until the modification queue is flushed. The modification queue is not persisted. If the underlying store does not become available before the asynchronous store is stopped, queued modifications are lost.

property*

Defines a cache store property with name and value.

file-store

Defines a filesystem-based cache store.

Name	Type	Description
max-entries	int	Specifies the maximum number of entries that the file store can hold. To increase the speed of lookups, Single File cache stores index keys and their locations in the file. To avoid excessive memory usage, you can configure the maximum number of entries so that entries are removed permanently from both memory and the cache store when the maximum is exceeded. However, this can lead to data loss. You should only set a maximum number of entries if data can be recomputed or retrieved from an authoritative data store. By default, the value is `-1` which means that there is no maximum number of entries.
relative-to	string	Defines the root path on the file system where data is stored.
path	string	Specifies a filesystem directory for data. The value can be a relative or absolute path. Relative paths are created relative to the configured global persistent location. Absolute paths must be subdirectories of the global persistent location, otherwise an exception is thrown.

Name	Type	Default	Description
shared	boolean	false	This setting should be set to true when multiple cache instances share the same cache store (e.g., multiple nodes in a cluster using a JDBC-based CacheStore pointing to the same, shared database.) Setting this to true avoids multiple cache instances writing the same modification multiple times. If enabled, only the node where the modification originated will write to the cache store. If disabled, each individual cache reacts to a potential remote update by storing the data to the cache store.
transactional	boolean	false	This setting should be set to true when the underlying cache store supports transactions and it is desirable for the underlying store and the cache to remain synchronized. With this enabled any Exceptions thrown whilst writing to the underlying store will result in both the store's and cache's transactions rollingback.
preload	boolean	false	If true, when the cache starts, data stored in the cache store will be pre-loaded into memory. This is particularly useful when data in the cache store will be needed immediately after startup and you want to avoid cache operations being delayed as a result of loading this data lazily. Can be used to provide a 'warm-cache' on startup, however there is a performance penalty as startup time is affected by this process.
fetch-state	boolean	false	Fetches the persistent state of a cache when joining a cluster. Values are true / false (default). The purpose of this property is to retrieve the persistent state of a cache and apply it to the local cache store of a node when it joins a cluster. Fetching the persistent state does not apply if a cache store is shared because it accesses the same data as the other stores. This property can be `true` for one configured cache loader only. If more than one cache loader fetches the persistent state, a configuration exception is thrown when the cache service starts.
purge	boolean	false	Empties the specified cache loader at startup. Values are true / false (default). This property takes effect only if read-only is false.
read-only	boolean	false	Prevents data from being persisted to cache stores. Values are true / false (default). If true, cache stores load entries only. Any modifications to data in the cache do not apply to cache stores.
max-batch-size	int	100	Sets the maximum size of a batch to insert or delete from the cache store. If the value is less than one, no upper limit applies to the number of operations in a batch.
segmented	boolean	true	Configures cache stores to store data in hash space segments, with the "hash.numSegments" property defining the number of segments.

write-behind?

Configures cache stores as write-behind instead of write-through.

Name	Type	Default	Description
modification-queue-size	int	1024	Specifies the maximum number of entries in the asynchronous modification queue. When the queue is full, write-through mode is used until the queue can accept new entries.
thread-pool-size	int	1	Specifies the number of threads to apply modifications to the cache store.
fail-silently	boolean	false	Controls how asynchronous write operations take place when cache stores become unavailable. If "true", asynchronous write operations that fail are re-attempted with the number of times specified in the "connection-attempts" parameter. If all attempts fail, errors are ignored and write operations are not executed on the cache store. If "false", asynchronous write operations that fail are re-attempted when the underlying store becomes available. If the modification queue becomes full before the underlying store becomes available, an error is thrown on all future write operations to the store until the modification queue is flushed. The modification queue is not persisted. If the underlying store does not become available before the asynchronous store is stopped, queued modifications are lost.

property*

Defines a cache store property with name and value.

memory?

Controls how the entries are stored in memory

object

Store keys and values as instance variables in the Java heap. Instances of byte[] are wrapped to ensure equality. This is the default storage format.

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs when the number of entries exceeds the size.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

binary

Store keys and values as bytes in the Java heap. Cache entries are serialized to binary representations. Note that binary storage violates object equality. This occurs because equality is determined by the equivalence of the resulting byte[] instead of the object instances.

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs either when the number of entries or amount of memory exceeds the size.

eviction

COUNT	Evict entries from the cache when the number of entries reaches the configured size.
MEMORY	Evict entries from the cache when the amount of memory in use reaches the configured size.

Specifies whether eviction is based on the number of entries or the amount of memory used.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

off-heap

Store keys and values as bytes in native memory. Cache entries are serialized to binary representations. Temporary objects are stored in the Java heap space until processing completes. Note that off-heap storage violates object equality. This occurs because equality is determined by the equivalence of the resulting byte[] instead of the object instances.

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs either when the number of entries or amount of memory exceeds the size.

eviction

COUNT	Evict entries from the cache when the number of entries reaches the configured size.
MEMORY	Evict entries from the cache when the amount of memory in use reaches the configured size.

Specifies whether eviction is based on the number of entries or the amount of memory used.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

indexing?

Defines indexing options for cache

Name

Type

Default

Description

index

NONE	Do not index data. This is the default.
LOCAL	Only index changes made locally, ignoring remote changes. This is useful if indexes are shared across a cluster to prevent redundant indexing of updates.
ALL	Index all data
PRIMARY_OWNER	Only index changes on the primary owner, regardless of it's local or remote.

NONE

The indexing mode of the cache. Defaults to NONE.

auto-config

boolean

false

Whether or not to apply automatic index configuration based on cache type

key-transformers?

Defines the Transformers used to stringify keys for indexing with Lucene

key-transformer*

Defines the Transformer to use for the specified key class

Name	Type	Default	Description
key	string
transformer	string

indexed-entities?

Defines the indexed entity classes

indexed-entity*

Indexed entity class name

property*

Property to pass on to the indexing system

custom-interceptors?

Deprecated since 10.0, will be removed without a replacement. Configures custom interceptors to be added to the cache.

interceptor*

Deprecated since 10.0, will be removed without a replacement.

Name	Type	Description
after	string	Dictates that the custom interceptor appears immediately after the specified interceptor. If the specified interceptor is not found in the interceptor chain, a ConfigurationException will be thrown when the cache starts.
before	string	Dictates that the custom interceptor appears immediately before the specified interceptor. If the specified interceptor is not found in the interceptor chain, a ConfigurationException will be thrown when the cache starts.
class	string	A fully qualified class name of the new custom interceptor to add to the configuration.
index	int	Specifies a position in the interceptor chain to place the new interceptor. The index starts at 0 and goes up to the number of interceptors in a given configuration. A ConfigurationException is thrown if the index is less than 0 or greater than the maximum number of interceptors in the chain.
position	string	Specifies a position where to place the new interceptor. Allowed values are FIRST, LAST, and OTHER_THAN_FIRST_OR_LAST

property?

security?

Configures cache-level security.

authorization?

Configures authorization for this cache.

Name	Type	Default	Description
enabled	boolean	false	Enables authorization checks for this cache. Defaults to true if the authorization element is present.
roles			Sets the valid roles required to access this cache.

local-cache-configuration

Defines a LOCAL mode cache configuration.

Name	Type	Default	Description
simple-cache	FIXME	false	This cache will be using optimized (faster) implementation that does not support transactions/invocation batching, persistence, custom interceptors, indexing, store-as-binary or transcoding. Also, this type of cache does not support Map-Reduce jobs or Distributed Executor framework.

Name	Type	Default	Description
name	ID		Uniquely identifies this cache within its cache container.
configuration	IDREF		The name of the cache configuration which this configuration inherits from.
start	FIXME		Unused XML attribute
jndi-name	string		Unused XML attribute
module	string		Unused XML attribute
statistics	boolean	false	Determines whether or not the cache should collect statistics. Keep disabled for optimal performance.
statistics-available	boolean	true	If set to false, statistics gathering cannot be enabled during runtime. Keep disabled for optimal performance.
unreliable-return-values	boolean	false	Specifies whether Infinispan is allowed to disregard the Map contract when providing return values for org.infinispan.Cache#put(Object, Object) and org.infinispan.Cache#remove(Object) methods.

backups?

Defines backup locations for cache data and modifies state transfer properties.

backup*

Configures a remote site as a backup location for cache data.

Name

Type

Default

Description

site

string

Names the remote site to which the cache backs up data.

strategy

ASYNC	Enables asynchronous mode.
SYNC	Enables synchronous mode.

ASYNC

Sets the strategy for backing up to a remote site.

failure-policy

IGNORE	Ignore failed backup operations and write to the local cache.
WARN	Log exceptions when backup operations fail and write to the local cache.
FAIL	Throw exceptions when backup operations fail and attempt to stop writes to the local cache.
CUSTOM	Use a custom failure policy. Requires the "failure-policy-class" attribute.

WARN

Controls how local writes to caches are handled if synchronous backup operations fail.

timeout

long

15000

Specifies timeout, in milliseconds, for synchronous and asynchronous backup operations.

enabled

boolean

true

Enables backup locations. Set the value to "false" to disable backups.

two-phase-commit

boolean

false

Enables two-phase commits for optimistic transactional caches with the synchronous backup strategy only.

failure-policy-class

string

Specifies the fully qualified name of a class that implements the CustomFailurePolicy interface. Use if failure-policy="CUSTOM".

take-offline?

Specifies the number of failures that can occur before backup locations go offline.

Name	Type	Default	Description
after-failures	int	0	Sets the number of consecutive failures that can occur for backup operations before sites go offline. Specify a negative or zero value to ignore this attribute and use minimum wait time only ("min-wait").
min-wait	long	0	Sets the minimum time to wait, in milliseconds, before sites go offline when backup operations fail. If subsequent operations are successful, the minimum wait time is reset. If you set "after-failures", sites go offline when the wait time is reached and the number of failures occur.

state-transfer?

Modifies state transfer operations.

Name	Type	Default	Description
chunk-size	int	512	Specifies how many cache entries are batched in each transfer request.
timeout	long	1200000	The time (in milliseconds) to wait for the backup site acknowledge the state chunk received and applied. Default value is 20 min.
max-retries	int	30	Sets the maximum number of retry attempts for push state failures. Specify a value of 0 (zero) to disable retry attempts. The default value is 30.
wait-time	long	2000	Sets the amount of time, in milliseconds, to wait between retry attempts for push state failures. You must specify a value of 1 or more. The default value is 2000.

backup-for?

Defines the local cache as a backup for a remote cache with a different name.

Name	Type	Default	Description
remote-cache	string		Specifies the name of the remote cache that uses the local cache as a backup.
remote-site	string		Specifies the name of the remote site that backs up data to the local cache.

encoding?

The cache encoding configuration.

Defines content type and encoding for keys and values of the cache.

key

Describes the content-type and encoding.

Name	Type	Default	Description
media-type	string

value

Describes the content-type and encoding.

Name	Type	Default	Description
media-type	string

locking?

The locking configuration of the cache.

Name

Type

Default

Description

isolation

NONE	No locking isolation will be performed. This is only valid in local mode. In clustered mode, READ_COMMITTED will be used instead.
READ_UNCOMMITTED	Unsupported. Actually configures READ_COMMITTED
READ_COMMITTED	Read committed is an isolation level that guarantees that any data read is committed at the moment it is read. However, depending on the outcome of other transactions, successive reads may return different results
REPEATABLE_READ	Repeatable read is an isolation level that guarantees that any data read is committed at the moment it is read and that, within a transaction, successive reads will always return the same data.
SERIALIZABLE	Unsupported. Actually configures REPEATABLE_READ

REPEATABLE_READ

Sets the cache locking isolation level. Infinispan only supports READ_COMMITTED or REPEATABLE_READ isolation level.

striping

boolean

false

acquire-timeout

long

10000

Maximum time to attempt a particular lock acquisition.

concurrency-level

int

Concurrency level for lock containers. Adjust this value according to the number of concurrent threads interacting with Infinispan.

transaction?

The cache transaction configuration.

Name

Type

Default

Description

mode

NONE	Cache will not enlist within transactions.
BATCH	Uses batching to group cache operations together.
NON_XA	Cache will enlist within transactions as a javax.transaction.Synchronization
NON_DURABLE_XA	Cache will enlist within transactions as a javax.transaction.xa.XAResource, without recovery.
FULL_XA	Cache will enlist within transactions as a javax.transaction.xa.XAResource, with recovery.

NONE

Sets the cache transaction mode to one of NONE, BATCH, NON_XA, NON_DURABLE_XA, FULL_XA.

stop-timeout

long

30000

locking

OPTIMISTIC	Enables Optimistic locking.
PESSIMISTIC	Enables Pessimistic locking.

OPTIMISTIC

The locking mode for this cache, one of OPTIMISTIC or PESSIMISTIC.

transaction-manager-lookup

string

org.infinispan.transaction.lookup.GenericTransactionManagerLookup

Configure Transaction manager lookup directly using an instance of TransactionManagerLookup. Calling this method marks the cache as transactional.

complete-timeout

long

60000

The duration (millis) in which to keep information about the completion of a transaction. Defaults to 60000.

reaper-interval

long

30000

The time interval (millis) at which the thread that cleans up transaction completion information kicks in. Defaults to 30000.

auto-commit

boolean

true

protocol

DEFAULT
TOTAL_ORDER

(Deprecated, Total Order will be removed) Configures the commit protocol to use.

recovery-cache

string

__recoveryInfoCacheName__

Sets the name of the cache where recovery related information is held. The cache's default name is "__recoveryInfoCacheName__"

notifications

boolean

true

Enables or disables triggering transactional notifications on cache listeners. By default is enabled.

expiration?

The cache expiration configuration.

Name	Type	Default	Description
max-idle	long	-1	Specifies the maximum amount of time, in milliseconds, that cache entries can remain idle. If no operations are performed on entries within the maximum idle time, the entries expire across the cluster. A value of 0 or -1 disables expiration.
lifespan	long	-1	Specifies the maximum amount of time, in milliseconds, that cache entries can exist. After reaching their lifespan, cache entries expire across the cluster. A value of 0 or -1 disables expiration.
interval	long	60000	Specifies the interval, in milliseconds, between expiration runs. A value of 0 or -1 disables the expiration reaper.

store-as-binary?

Configures the cache to store data in binary format.

Name	Type	Default	Description
keys	boolean		Specify whether keys are stored as binary or not. Enabled by default if the "enabled" attribute is set to true.
values	boolean		Specify whether values are stored as binary or not. Enabled by default if the "enabled" attribute is set to true.

persistence?

Configures the persistence layer for caches.

Name	Type	Default	Description
passivation	boolean	false	Enables passivation so that data is written to cache stores only if it is evicted from memory. Subsequent requests for passivated entries restore them to memory and remove them from persistent storage. If you do not enable passivation, writes to entries in memory result in writes to cache stores.
connection-attempts	int	10	Sets the maximum number of attempts to start each configured `CacheWriter` or `CacheLoader`. An exception is thrown and the cache does not start if the number of connection attempts exceeds the maximum.
connection-interval	int	50	Specifies the time, in milliseconds, to wait between connection attempts on startup. A negative or zero value means no wait between connection attempts.
availability-interval	int	1000	Specifies the time, in milliseconds, between availability checks to determine if the PersistenceManager is available. In other words, this interval sets how often stores and loaders are polled via their `org.infinispan.persistence.spi.CacheWriter#isAvailable` or `org.infinispan.persistence.spi.CacheLoader#isAvailable` implementation. If a single store or loader is not available, an exception is thrown during cache operations.

cluster-loader

Defines a cluster cache loader.

Name	Type	Default	Description
remote-timeout	long	15000	The timeout when performing remote calls.

Name	Type	Default	Description
name	string		Unused XML attribute.
shared	boolean	false	Determines if a cache loader is shared between cache instances. Values are true / false (default). This property prevents duplicate writes of data to the cache loader by different cache instances. An example is where all cache instances in a cluster use the same JDBC settings for the same remote, shared database. If true, only the nodes where modifications originate write to the cache store. If false, each cache reacts to potential remote updates by storing the data to the cache store.
preload	boolean	false	Pre-loads data into memory from the cache loader when the cache starts. Values are true / false (default). This property is useful when data in the cache loader is required immediately after startup to prevent delays with cache operations when the data is loaded lazily. This property can provide a "warm cache" on startup but it impacts performance because it affects start time. Pre-loading data is done locally, so any data loaded is stored locally in the node only. Pre-loaded data is not replicated or distributed. Likewise, data is pre-loaded only up to the maximum configured number of entries in eviction.

property*

A cache loader property with name and value.

store

Defines a custom cache store.

Name	Type	Default	Description
class	string		Defines the class name of a cache store that implements either `CacheLoader`, `CacheWriter`, or both.

Name	Type	Default	Description
shared	boolean	false	This setting should be set to true when multiple cache instances share the same cache store (e.g., multiple nodes in a cluster using a JDBC-based CacheStore pointing to the same, shared database.) Setting this to true avoids multiple cache instances writing the same modification multiple times. If enabled, only the node where the modification originated will write to the cache store. If disabled, each individual cache reacts to a potential remote update by storing the data to the cache store.
transactional	boolean	false	This setting should be set to true when the underlying cache store supports transactions and it is desirable for the underlying store and the cache to remain synchronized. With this enabled any Exceptions thrown whilst writing to the underlying store will result in both the store's and cache's transactions rollingback.
preload	boolean	false	If true, when the cache starts, data stored in the cache store will be pre-loaded into memory. This is particularly useful when data in the cache store will be needed immediately after startup and you want to avoid cache operations being delayed as a result of loading this data lazily. Can be used to provide a 'warm-cache' on startup, however there is a performance penalty as startup time is affected by this process.
fetch-state	boolean	false	Fetches the persistent state of a cache when joining a cluster. Values are true / false (default). The purpose of this property is to retrieve the persistent state of a cache and apply it to the local cache store of a node when it joins a cluster. Fetching the persistent state does not apply if a cache store is shared because it accesses the same data as the other stores. This property can be `true` for one configured cache loader only. If more than one cache loader fetches the persistent state, a configuration exception is thrown when the cache service starts.
purge	boolean	false	Empties the specified cache loader at startup. Values are true / false (default). This property takes effect only if read-only is false.
read-only	boolean	false	Prevents data from being persisted to cache stores. Values are true / false (default). If true, cache stores load entries only. Any modifications to data in the cache do not apply to cache stores.
max-batch-size	int	100	Sets the maximum size of a batch to insert or delete from the cache store. If the value is less than one, no upper limit applies to the number of operations in a batch.
segmented	boolean	true	Configures cache stores to store data in hash space segments, with the "hash.numSegments" property defining the number of segments.

write-behind?

Configures cache stores as write-behind instead of write-through.

Name	Type	Default	Description
modification-queue-size	int	1024	Specifies the maximum number of entries in the asynchronous modification queue. When the queue is full, write-through mode is used until the queue can accept new entries.
thread-pool-size	int	1	Specifies the number of threads to apply modifications to the cache store.
fail-silently	boolean	false	Controls how asynchronous write operations take place when cache stores become unavailable. If "true", asynchronous write operations that fail are re-attempted with the number of times specified in the "connection-attempts" parameter. If all attempts fail, errors are ignored and write operations are not executed on the cache store. If "false", asynchronous write operations that fail are re-attempted when the underlying store becomes available. If the modification queue becomes full before the underlying store becomes available, an error is thrown on all future write operations to the store until the modification queue is flushed. The modification queue is not persisted. If the underlying store does not become available before the asynchronous store is stopped, queued modifications are lost.

property*

Defines a cache store property with name and value.

file-store

Defines a filesystem-based cache store.

Name	Type	Description
max-entries	int	Specifies the maximum number of entries that the file store can hold. To increase the speed of lookups, Single File cache stores index keys and their locations in the file. To avoid excessive memory usage, you can configure the maximum number of entries so that entries are removed permanently from both memory and the cache store when the maximum is exceeded. However, this can lead to data loss. You should only set a maximum number of entries if data can be recomputed or retrieved from an authoritative data store. By default, the value is `-1` which means that there is no maximum number of entries.
relative-to	string	Defines the root path on the file system where data is stored.
path	string	Specifies a filesystem directory for data. The value can be a relative or absolute path. Relative paths are created relative to the configured global persistent location. Absolute paths must be subdirectories of the global persistent location, otherwise an exception is thrown.

Name	Type	Default	Description
shared	boolean	false	This setting should be set to true when multiple cache instances share the same cache store (e.g., multiple nodes in a cluster using a JDBC-based CacheStore pointing to the same, shared database.) Setting this to true avoids multiple cache instances writing the same modification multiple times. If enabled, only the node where the modification originated will write to the cache store. If disabled, each individual cache reacts to a potential remote update by storing the data to the cache store.
transactional	boolean	false	This setting should be set to true when the underlying cache store supports transactions and it is desirable for the underlying store and the cache to remain synchronized. With this enabled any Exceptions thrown whilst writing to the underlying store will result in both the store's and cache's transactions rollingback.
preload	boolean	false	If true, when the cache starts, data stored in the cache store will be pre-loaded into memory. This is particularly useful when data in the cache store will be needed immediately after startup and you want to avoid cache operations being delayed as a result of loading this data lazily. Can be used to provide a 'warm-cache' on startup, however there is a performance penalty as startup time is affected by this process.
fetch-state	boolean	false	Fetches the persistent state of a cache when joining a cluster. Values are true / false (default). The purpose of this property is to retrieve the persistent state of a cache and apply it to the local cache store of a node when it joins a cluster. Fetching the persistent state does not apply if a cache store is shared because it accesses the same data as the other stores. This property can be `true` for one configured cache loader only. If more than one cache loader fetches the persistent state, a configuration exception is thrown when the cache service starts.
purge	boolean	false	Empties the specified cache loader at startup. Values are true / false (default). This property takes effect only if read-only is false.
read-only	boolean	false	Prevents data from being persisted to cache stores. Values are true / false (default). If true, cache stores load entries only. Any modifications to data in the cache do not apply to cache stores.
max-batch-size	int	100	Sets the maximum size of a batch to insert or delete from the cache store. If the value is less than one, no upper limit applies to the number of operations in a batch.
segmented	boolean	true	Configures cache stores to store data in hash space segments, with the "hash.numSegments" property defining the number of segments.

write-behind?

Configures cache stores as write-behind instead of write-through.

Name	Type	Default	Description
modification-queue-size	int	1024	Specifies the maximum number of entries in the asynchronous modification queue. When the queue is full, write-through mode is used until the queue can accept new entries.
thread-pool-size	int	1	Specifies the number of threads to apply modifications to the cache store.
fail-silently	boolean	false	Controls how asynchronous write operations take place when cache stores become unavailable. If "true", asynchronous write operations that fail are re-attempted with the number of times specified in the "connection-attempts" parameter. If all attempts fail, errors are ignored and write operations are not executed on the cache store. If "false", asynchronous write operations that fail are re-attempted when the underlying store becomes available. If the modification queue becomes full before the underlying store becomes available, an error is thrown on all future write operations to the store until the modification queue is flushed. The modification queue is not persisted. If the underlying store does not become available before the asynchronous store is stopped, queued modifications are lost.

property*

Defines a cache store property with name and value.

memory?

Controls how the entries are stored in memory

object

Store keys and values as instance variables in the Java heap. Instances of byte[] are wrapped to ensure equality. This is the default storage format.

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs when the number of entries exceeds the size.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

binary

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs either when the number of entries or amount of memory exceeds the size.

eviction

COUNT	Evict entries from the cache when the number of entries reaches the configured size.
MEMORY	Evict entries from the cache when the amount of memory in use reaches the configured size.

Specifies whether eviction is based on the number of entries or the amount of memory used.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

off-heap

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs either when the number of entries or amount of memory exceeds the size.

eviction

COUNT	Evict entries from the cache when the number of entries reaches the configured size.
MEMORY	Evict entries from the cache when the amount of memory in use reaches the configured size.

Specifies whether eviction is based on the number of entries or the amount of memory used.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

indexing?

Defines indexing options for cache

Name

Type

Default

Description

index

NONE	Do not index data. This is the default.
LOCAL	Only index changes made locally, ignoring remote changes. This is useful if indexes are shared across a cluster to prevent redundant indexing of updates.
ALL	Index all data
PRIMARY_OWNER	Only index changes on the primary owner, regardless of it's local or remote.

NONE

The indexing mode of the cache. Defaults to NONE.

auto-config

boolean

false

Whether or not to apply automatic index configuration based on cache type

key-transformers?

Defines the Transformers used to stringify keys for indexing with Lucene

key-transformer*

Defines the Transformer to use for the specified key class

Name	Type	Default	Description
key	string
transformer	string

indexed-entities?

Defines the indexed entity classes

indexed-entity*

Indexed entity class name

property*

Property to pass on to the indexing system

custom-interceptors?

Deprecated since 10.0, will be removed without a replacement. Configures custom interceptors to be added to the cache.

interceptor*

Deprecated since 10.0, will be removed without a replacement.

Name	Type	Description
after	string	Dictates that the custom interceptor appears immediately after the specified interceptor. If the specified interceptor is not found in the interceptor chain, a ConfigurationException will be thrown when the cache starts.
before	string	Dictates that the custom interceptor appears immediately before the specified interceptor. If the specified interceptor is not found in the interceptor chain, a ConfigurationException will be thrown when the cache starts.
class	string	A fully qualified class name of the new custom interceptor to add to the configuration.
index	int	Specifies a position in the interceptor chain to place the new interceptor. The index starts at 0 and goes up to the number of interceptors in a given configuration. A ConfigurationException is thrown if the index is less than 0 or greater than the maximum number of interceptors in the chain.
position	string	Specifies a position where to place the new interceptor. Allowed values are FIRST, LAST, and OTHER_THAN_FIRST_OR_LAST

property?

security?

Configures cache-level security.

authorization?

Configures authorization for this cache.

Name	Type	Default	Description
enabled	boolean	false	Enables authorization checks for this cache. Defaults to true if the authorization element is present.
roles			Sets the valid roles required to access this cache.

replicated-cache

Defines a REPL_* mode cache.

Name	Type	Default	Description
segments	int	256	Sets the number of hash space segments per cluster. The default value is 256. The value should be at least 20 * the cluster size.
consistent-hash-factory	string		The factory to use for generating the consistent hash. Must implement `org.infinispan.distribution.ch.ConsistentHashFactory`. E.g. `org.infinispan.distribution.ch.impl.SyncConsistentHashFactory` can be used to guarantee that multiple distributed caches use exactly the same consistent hash, which for performance reasons is not guaranteed by the default consistent hash factory instance used.
key-partitioner	string		The name of the key partitioner class. Must implement `org.infinispan.distribution.ch.KeyPartitioner`. A custom key partitioner can be used as an alternative to grouping, to guarantee that some keys are located in the same segment (and thus their primary owner is the same node). Since 8.2.

state-transfer?

The state transfer configuration for distribution and replicated caches.

Name	Type	Default	Description
enabled	boolean	true	If enabled, this will cause the cache to ask neighboring caches for state when it starts up, so the cache starts 'warm', although it will impact startup time.
timeout	long	240000	The maximum amount of time (ms) to wait for state from neighboring caches, before throwing an exception and aborting startup.
chunk-size	integer	512	The number of cache entries to batch in each transfer.
await-initial-transfer	boolean	true	If enabled, this will cause the cache to wait for initial state transfer to complete before responding to requests.

Name

Type

Default

Description

mode

ASYNC	Enables asynchronous mode.
SYNC	Enables synchronous mode.

SYNC

Sets the clustered cache mode, ASYNC for asynchronous operation, or SYNC for synchronous operation.

remote-timeout

long

15000

In SYNC mode, the timeout (in ms) used to wait for an acknowledgment when making a remote call, after which the call is aborted and an exception is thrown.

partition-handling?

Configures the way this cache reacts to node crashes and split brains.

Name

Type

Default

Description

enabled

boolean

Deprecated, use type instead. Enable/disable the partition handling functionality. Defaults to false.

when-split

DENY_READ_WRITES	If the partition does not have all owners for a given segment, both reads and writes are denied for all keys in that segment.
ALLOW_READS	Allows reads for a given key if it exists in this partition, but only allows writes if this partition contains all owners of a segment.
ALLOW_READ_WRITES	Allow entries on each partition to diverge, with conflicts resolved during merge.

ALLOW_READ_WRITES

The type of actions that are possible when a split brain scenario is encountered.

merge-policy

NONE

The entry merge policy which should be applied on partition merges.

Name	Type	Default	Description
name	ID		Uniquely identifies this cache within its cache container.
configuration	IDREF		The name of the cache configuration which this configuration inherits from.
start	FIXME		Unused XML attribute
jndi-name	string		Unused XML attribute
module	string		Unused XML attribute
statistics	boolean	false	Determines whether or not the cache should collect statistics. Keep disabled for optimal performance.
statistics-available	boolean	true	If set to false, statistics gathering cannot be enabled during runtime. Keep disabled for optimal performance.
unreliable-return-values	boolean	false	Specifies whether Infinispan is allowed to disregard the Map contract when providing return values for org.infinispan.Cache#put(Object, Object) and org.infinispan.Cache#remove(Object) methods.

backups?

Defines backup locations for cache data and modifies state transfer properties.

backup*

Configures a remote site as a backup location for cache data.

Name

Type

Default

Description

site

string

Names the remote site to which the cache backs up data.

strategy

ASYNC	Enables asynchronous mode.
SYNC	Enables synchronous mode.

ASYNC

Sets the strategy for backing up to a remote site.

failure-policy

IGNORE	Ignore failed backup operations and write to the local cache.
WARN	Log exceptions when backup operations fail and write to the local cache.
FAIL	Throw exceptions when backup operations fail and attempt to stop writes to the local cache.
CUSTOM	Use a custom failure policy. Requires the "failure-policy-class" attribute.

WARN

Controls how local writes to caches are handled if synchronous backup operations fail.

timeout

long

15000

Specifies timeout, in milliseconds, for synchronous and asynchronous backup operations.

enabled

boolean

true

Enables backup locations. Set the value to "false" to disable backups.

two-phase-commit

boolean

false

Enables two-phase commits for optimistic transactional caches with the synchronous backup strategy only.

failure-policy-class

string

Specifies the fully qualified name of a class that implements the CustomFailurePolicy interface. Use if failure-policy="CUSTOM".

take-offline?

Specifies the number of failures that can occur before backup locations go offline.

Name	Type	Default	Description
after-failures	int	0	Sets the number of consecutive failures that can occur for backup operations before sites go offline. Specify a negative or zero value to ignore this attribute and use minimum wait time only ("min-wait").
min-wait	long	0	Sets the minimum time to wait, in milliseconds, before sites go offline when backup operations fail. If subsequent operations are successful, the minimum wait time is reset. If you set "after-failures", sites go offline when the wait time is reached and the number of failures occur.

state-transfer?

Modifies state transfer operations.

Name	Type	Default	Description
chunk-size	int	512	Specifies how many cache entries are batched in each transfer request.
timeout	long	1200000	The time (in milliseconds) to wait for the backup site acknowledge the state chunk received and applied. Default value is 20 min.
max-retries	int	30	Sets the maximum number of retry attempts for push state failures. Specify a value of 0 (zero) to disable retry attempts. The default value is 30.
wait-time	long	2000	Sets the amount of time, in milliseconds, to wait between retry attempts for push state failures. You must specify a value of 1 or more. The default value is 2000.

backup-for?

Defines the local cache as a backup for a remote cache with a different name.

Name	Type	Default	Description
remote-cache	string		Specifies the name of the remote cache that uses the local cache as a backup.
remote-site	string		Specifies the name of the remote site that backs up data to the local cache.

encoding?

The cache encoding configuration.

Defines content type and encoding for keys and values of the cache.

key

Describes the content-type and encoding.

Name	Type	Default	Description
media-type	string

value

Describes the content-type and encoding.

Name	Type	Default	Description
media-type	string

locking?

The locking configuration of the cache.

Name

Type

Default

Description

isolation

NONE	No locking isolation will be performed. This is only valid in local mode. In clustered mode, READ_COMMITTED will be used instead.
READ_UNCOMMITTED	Unsupported. Actually configures READ_COMMITTED
READ_COMMITTED	Read committed is an isolation level that guarantees that any data read is committed at the moment it is read. However, depending on the outcome of other transactions, successive reads may return different results
REPEATABLE_READ	Repeatable read is an isolation level that guarantees that any data read is committed at the moment it is read and that, within a transaction, successive reads will always return the same data.
SERIALIZABLE	Unsupported. Actually configures REPEATABLE_READ

REPEATABLE_READ

Sets the cache locking isolation level. Infinispan only supports READ_COMMITTED or REPEATABLE_READ isolation level.

striping

boolean

false

acquire-timeout

long

10000

Maximum time to attempt a particular lock acquisition.

concurrency-level

int

Concurrency level for lock containers. Adjust this value according to the number of concurrent threads interacting with Infinispan.

transaction?

The cache transaction configuration.

Name

Type

Default

Description

mode

NONE	Cache will not enlist within transactions.
BATCH	Uses batching to group cache operations together.
NON_XA	Cache will enlist within transactions as a javax.transaction.Synchronization
NON_DURABLE_XA	Cache will enlist within transactions as a javax.transaction.xa.XAResource, without recovery.
FULL_XA	Cache will enlist within transactions as a javax.transaction.xa.XAResource, with recovery.

NONE

Sets the cache transaction mode to one of NONE, BATCH, NON_XA, NON_DURABLE_XA, FULL_XA.

stop-timeout

long

30000

locking

OPTIMISTIC	Enables Optimistic locking.
PESSIMISTIC	Enables Pessimistic locking.

OPTIMISTIC

The locking mode for this cache, one of OPTIMISTIC or PESSIMISTIC.

transaction-manager-lookup

string

org.infinispan.transaction.lookup.GenericTransactionManagerLookup

Configure Transaction manager lookup directly using an instance of TransactionManagerLookup. Calling this method marks the cache as transactional.

complete-timeout

long

60000

The duration (millis) in which to keep information about the completion of a transaction. Defaults to 60000.

reaper-interval

long

30000

The time interval (millis) at which the thread that cleans up transaction completion information kicks in. Defaults to 30000.

auto-commit

boolean

true

protocol

DEFAULT
TOTAL_ORDER

(Deprecated, Total Order will be removed) Configures the commit protocol to use.

recovery-cache

string

__recoveryInfoCacheName__

Sets the name of the cache where recovery related information is held. The cache's default name is "__recoveryInfoCacheName__"

notifications

boolean

true

Enables or disables triggering transactional notifications on cache listeners. By default is enabled.

expiration?

The cache expiration configuration.

Name	Type	Default	Description
max-idle	long	-1	Specifies the maximum amount of time, in milliseconds, that cache entries can remain idle. If no operations are performed on entries within the maximum idle time, the entries expire across the cluster. A value of 0 or -1 disables expiration.
lifespan	long	-1	Specifies the maximum amount of time, in milliseconds, that cache entries can exist. After reaching their lifespan, cache entries expire across the cluster. A value of 0 or -1 disables expiration.
interval	long	60000	Specifies the interval, in milliseconds, between expiration runs. A value of 0 or -1 disables the expiration reaper.

store-as-binary?

Configures the cache to store data in binary format.

Name	Type	Default	Description
keys	boolean		Specify whether keys are stored as binary or not. Enabled by default if the "enabled" attribute is set to true.
values	boolean		Specify whether values are stored as binary or not. Enabled by default if the "enabled" attribute is set to true.

persistence?

Configures the persistence layer for caches.

Name	Type	Default	Description
passivation	boolean	false	Enables passivation so that data is written to cache stores only if it is evicted from memory. Subsequent requests for passivated entries restore them to memory and remove them from persistent storage. If you do not enable passivation, writes to entries in memory result in writes to cache stores.
connection-attempts	int	10	Sets the maximum number of attempts to start each configured `CacheWriter` or `CacheLoader`. An exception is thrown and the cache does not start if the number of connection attempts exceeds the maximum.
connection-interval	int	50	Specifies the time, in milliseconds, to wait between connection attempts on startup. A negative or zero value means no wait between connection attempts.
availability-interval	int	1000	Specifies the time, in milliseconds, between availability checks to determine if the PersistenceManager is available. In other words, this interval sets how often stores and loaders are polled via their `org.infinispan.persistence.spi.CacheWriter#isAvailable` or `org.infinispan.persistence.spi.CacheLoader#isAvailable` implementation. If a single store or loader is not available, an exception is thrown during cache operations.

cluster-loader

Defines a cluster cache loader.

Name	Type	Default	Description
remote-timeout	long	15000	The timeout when performing remote calls.

Name	Type	Default	Description
name	string		Unused XML attribute.
shared	boolean	false	Determines if a cache loader is shared between cache instances. Values are true / false (default). This property prevents duplicate writes of data to the cache loader by different cache instances. An example is where all cache instances in a cluster use the same JDBC settings for the same remote, shared database. If true, only the nodes where modifications originate write to the cache store. If false, each cache reacts to potential remote updates by storing the data to the cache store.
preload	boolean	false	Pre-loads data into memory from the cache loader when the cache starts. Values are true / false (default). This property is useful when data in the cache loader is required immediately after startup to prevent delays with cache operations when the data is loaded lazily. This property can provide a "warm cache" on startup but it impacts performance because it affects start time. Pre-loading data is done locally, so any data loaded is stored locally in the node only. Pre-loaded data is not replicated or distributed. Likewise, data is pre-loaded only up to the maximum configured number of entries in eviction.

property*

A cache loader property with name and value.

store

Defines a custom cache store.

Name	Type	Default	Description
class	string		Defines the class name of a cache store that implements either `CacheLoader`, `CacheWriter`, or both.

Name	Type	Default	Description
shared	boolean	false	This setting should be set to true when multiple cache instances share the same cache store (e.g., multiple nodes in a cluster using a JDBC-based CacheStore pointing to the same, shared database.) Setting this to true avoids multiple cache instances writing the same modification multiple times. If enabled, only the node where the modification originated will write to the cache store. If disabled, each individual cache reacts to a potential remote update by storing the data to the cache store.
transactional	boolean	false	This setting should be set to true when the underlying cache store supports transactions and it is desirable for the underlying store and the cache to remain synchronized. With this enabled any Exceptions thrown whilst writing to the underlying store will result in both the store's and cache's transactions rollingback.
preload	boolean	false	If true, when the cache starts, data stored in the cache store will be pre-loaded into memory. This is particularly useful when data in the cache store will be needed immediately after startup and you want to avoid cache operations being delayed as a result of loading this data lazily. Can be used to provide a 'warm-cache' on startup, however there is a performance penalty as startup time is affected by this process.
fetch-state	boolean	false	Fetches the persistent state of a cache when joining a cluster. Values are true / false (default). The purpose of this property is to retrieve the persistent state of a cache and apply it to the local cache store of a node when it joins a cluster. Fetching the persistent state does not apply if a cache store is shared because it accesses the same data as the other stores. This property can be `true` for one configured cache loader only. If more than one cache loader fetches the persistent state, a configuration exception is thrown when the cache service starts.
purge	boolean	false	Empties the specified cache loader at startup. Values are true / false (default). This property takes effect only if read-only is false.
read-only	boolean	false	Prevents data from being persisted to cache stores. Values are true / false (default). If true, cache stores load entries only. Any modifications to data in the cache do not apply to cache stores.
max-batch-size	int	100	Sets the maximum size of a batch to insert or delete from the cache store. If the value is less than one, no upper limit applies to the number of operations in a batch.
segmented	boolean	true	Configures cache stores to store data in hash space segments, with the "hash.numSegments" property defining the number of segments.

write-behind?

Configures cache stores as write-behind instead of write-through.

Name	Type	Default	Description
modification-queue-size	int	1024	Specifies the maximum number of entries in the asynchronous modification queue. When the queue is full, write-through mode is used until the queue can accept new entries.
thread-pool-size	int	1	Specifies the number of threads to apply modifications to the cache store.
fail-silently	boolean	false	Controls how asynchronous write operations take place when cache stores become unavailable. If "true", asynchronous write operations that fail are re-attempted with the number of times specified in the "connection-attempts" parameter. If all attempts fail, errors are ignored and write operations are not executed on the cache store. If "false", asynchronous write operations that fail are re-attempted when the underlying store becomes available. If the modification queue becomes full before the underlying store becomes available, an error is thrown on all future write operations to the store until the modification queue is flushed. The modification queue is not persisted. If the underlying store does not become available before the asynchronous store is stopped, queued modifications are lost.

property*

Defines a cache store property with name and value.

file-store

Defines a filesystem-based cache store.

Name	Type	Description
max-entries	int	Specifies the maximum number of entries that the file store can hold. To increase the speed of lookups, Single File cache stores index keys and their locations in the file. To avoid excessive memory usage, you can configure the maximum number of entries so that entries are removed permanently from both memory and the cache store when the maximum is exceeded. However, this can lead to data loss. You should only set a maximum number of entries if data can be recomputed or retrieved from an authoritative data store. By default, the value is `-1` which means that there is no maximum number of entries.
relative-to	string	Defines the root path on the file system where data is stored.
path	string	Specifies a filesystem directory for data. The value can be a relative or absolute path. Relative paths are created relative to the configured global persistent location. Absolute paths must be subdirectories of the global persistent location, otherwise an exception is thrown.

Name	Type	Default	Description
shared	boolean	false	This setting should be set to true when multiple cache instances share the same cache store (e.g., multiple nodes in a cluster using a JDBC-based CacheStore pointing to the same, shared database.) Setting this to true avoids multiple cache instances writing the same modification multiple times. If enabled, only the node where the modification originated will write to the cache store. If disabled, each individual cache reacts to a potential remote update by storing the data to the cache store.
transactional	boolean	false	This setting should be set to true when the underlying cache store supports transactions and it is desirable for the underlying store and the cache to remain synchronized. With this enabled any Exceptions thrown whilst writing to the underlying store will result in both the store's and cache's transactions rollingback.
preload	boolean	false	If true, when the cache starts, data stored in the cache store will be pre-loaded into memory. This is particularly useful when data in the cache store will be needed immediately after startup and you want to avoid cache operations being delayed as a result of loading this data lazily. Can be used to provide a 'warm-cache' on startup, however there is a performance penalty as startup time is affected by this process.
fetch-state	boolean	false	Fetches the persistent state of a cache when joining a cluster. Values are true / false (default). The purpose of this property is to retrieve the persistent state of a cache and apply it to the local cache store of a node when it joins a cluster. Fetching the persistent state does not apply if a cache store is shared because it accesses the same data as the other stores. This property can be `true` for one configured cache loader only. If more than one cache loader fetches the persistent state, a configuration exception is thrown when the cache service starts.
purge	boolean	false	Empties the specified cache loader at startup. Values are true / false (default). This property takes effect only if read-only is false.
read-only	boolean	false	Prevents data from being persisted to cache stores. Values are true / false (default). If true, cache stores load entries only. Any modifications to data in the cache do not apply to cache stores.
max-batch-size	int	100	Sets the maximum size of a batch to insert or delete from the cache store. If the value is less than one, no upper limit applies to the number of operations in a batch.
segmented	boolean	true	Configures cache stores to store data in hash space segments, with the "hash.numSegments" property defining the number of segments.

write-behind?

Configures cache stores as write-behind instead of write-through.

Name	Type	Default	Description
modification-queue-size	int	1024	Specifies the maximum number of entries in the asynchronous modification queue. When the queue is full, write-through mode is used until the queue can accept new entries.
thread-pool-size	int	1	Specifies the number of threads to apply modifications to the cache store.
fail-silently	boolean	false	Controls how asynchronous write operations take place when cache stores become unavailable. If "true", asynchronous write operations that fail are re-attempted with the number of times specified in the "connection-attempts" parameter. If all attempts fail, errors are ignored and write operations are not executed on the cache store. If "false", asynchronous write operations that fail are re-attempted when the underlying store becomes available. If the modification queue becomes full before the underlying store becomes available, an error is thrown on all future write operations to the store until the modification queue is flushed. The modification queue is not persisted. If the underlying store does not become available before the asynchronous store is stopped, queued modifications are lost.

property*

Defines a cache store property with name and value.

memory?

Controls how the entries are stored in memory

object

Store keys and values as instance variables in the Java heap. Instances of byte[] are wrapped to ensure equality. This is the default storage format.

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs when the number of entries exceeds the size.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

binary

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs either when the number of entries or amount of memory exceeds the size.

eviction

COUNT	Evict entries from the cache when the number of entries reaches the configured size.
MEMORY	Evict entries from the cache when the amount of memory in use reaches the configured size.

Specifies whether eviction is based on the number of entries or the amount of memory used.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

off-heap

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs either when the number of entries or amount of memory exceeds the size.

eviction

COUNT	Evict entries from the cache when the number of entries reaches the configured size.
MEMORY	Evict entries from the cache when the amount of memory in use reaches the configured size.

Specifies whether eviction is based on the number of entries or the amount of memory used.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

indexing?

Defines indexing options for cache

Name

Type

Default

Description

index

NONE	Do not index data. This is the default.
LOCAL	Only index changes made locally, ignoring remote changes. This is useful if indexes are shared across a cluster to prevent redundant indexing of updates.
ALL	Index all data
PRIMARY_OWNER	Only index changes on the primary owner, regardless of it's local or remote.

NONE

The indexing mode of the cache. Defaults to NONE.

auto-config

boolean

false

Whether or not to apply automatic index configuration based on cache type

key-transformers?

Defines the Transformers used to stringify keys for indexing with Lucene

key-transformer*

Defines the Transformer to use for the specified key class

Name	Type	Default	Description
key	string
transformer	string

indexed-entities?

Defines the indexed entity classes

indexed-entity*

Indexed entity class name

property*

Property to pass on to the indexing system

custom-interceptors?

Deprecated since 10.0, will be removed without a replacement. Configures custom interceptors to be added to the cache.

interceptor*

Deprecated since 10.0, will be removed without a replacement.

Name	Type	Description
after	string	Dictates that the custom interceptor appears immediately after the specified interceptor. If the specified interceptor is not found in the interceptor chain, a ConfigurationException will be thrown when the cache starts.
before	string	Dictates that the custom interceptor appears immediately before the specified interceptor. If the specified interceptor is not found in the interceptor chain, a ConfigurationException will be thrown when the cache starts.
class	string	A fully qualified class name of the new custom interceptor to add to the configuration.
index	int	Specifies a position in the interceptor chain to place the new interceptor. The index starts at 0 and goes up to the number of interceptors in a given configuration. A ConfigurationException is thrown if the index is less than 0 or greater than the maximum number of interceptors in the chain.
position	string	Specifies a position where to place the new interceptor. Allowed values are FIRST, LAST, and OTHER_THAN_FIRST_OR_LAST

property?

security?

Configures cache-level security.

authorization?

Configures authorization for this cache.

Name	Type	Default	Description
enabled	boolean	false	Enables authorization checks for this cache. Defaults to true if the authorization element is present.
roles			Sets the valid roles required to access this cache.

replicated-cache-configuration

Defines a REPL_* mode cache configuration.

Name	Type	Default	Description
segments	int	256	Sets the number of hash space segments per cluster. The default value is 256. The value should be at least 20 * the cluster size.
consistent-hash-factory	string		The factory to use for generating the consistent hash. Must implement `org.infinispan.distribution.ch.ConsistentHashFactory`. E.g. `org.infinispan.distribution.ch.impl.SyncConsistentHashFactory` can be used to guarantee that multiple distributed caches use exactly the same consistent hash, which for performance reasons is not guaranteed by the default consistent hash factory instance used.
key-partitioner	string		The name of the key partitioner class. Must implement `org.infinispan.distribution.ch.KeyPartitioner`. A custom key partitioner can be used as an alternative to grouping, to guarantee that some keys are located in the same segment (and thus their primary owner is the same node). Since 8.2.

state-transfer?

The state transfer configuration for distribution and replicated caches.

Name	Type	Default	Description
enabled	boolean	true	If enabled, this will cause the cache to ask neighboring caches for state when it starts up, so the cache starts 'warm', although it will impact startup time.
timeout	long	240000	The maximum amount of time (ms) to wait for state from neighboring caches, before throwing an exception and aborting startup.
chunk-size	integer	512	The number of cache entries to batch in each transfer.
await-initial-transfer	boolean	true	If enabled, this will cause the cache to wait for initial state transfer to complete before responding to requests.

Name

Type

Default

Description

mode

ASYNC	Enables asynchronous mode.
SYNC	Enables synchronous mode.

SYNC

Sets the clustered cache mode, ASYNC for asynchronous operation, or SYNC for synchronous operation.

remote-timeout

long

15000

In SYNC mode, the timeout (in ms) used to wait for an acknowledgment when making a remote call, after which the call is aborted and an exception is thrown.

partition-handling?

Configures the way this cache reacts to node crashes and split brains.

Name

Type

Default

Description

enabled

boolean

Deprecated, use type instead. Enable/disable the partition handling functionality. Defaults to false.

when-split

DENY_READ_WRITES	If the partition does not have all owners for a given segment, both reads and writes are denied for all keys in that segment.
ALLOW_READS	Allows reads for a given key if it exists in this partition, but only allows writes if this partition contains all owners of a segment.
ALLOW_READ_WRITES	Allow entries on each partition to diverge, with conflicts resolved during merge.

ALLOW_READ_WRITES

The type of actions that are possible when a split brain scenario is encountered.

merge-policy

NONE

The entry merge policy which should be applied on partition merges.

Name	Type	Default	Description
name	ID		Uniquely identifies this cache within its cache container.
configuration	IDREF		The name of the cache configuration which this configuration inherits from.
start	FIXME		Unused XML attribute
jndi-name	string		Unused XML attribute
module	string		Unused XML attribute
statistics	boolean	false	Determines whether or not the cache should collect statistics. Keep disabled for optimal performance.
statistics-available	boolean	true	If set to false, statistics gathering cannot be enabled during runtime. Keep disabled for optimal performance.
unreliable-return-values	boolean	false	Specifies whether Infinispan is allowed to disregard the Map contract when providing return values for org.infinispan.Cache#put(Object, Object) and org.infinispan.Cache#remove(Object) methods.

backups?

Defines backup locations for cache data and modifies state transfer properties.

backup*

Configures a remote site as a backup location for cache data.

Name

Type

Default

Description

site

string

Names the remote site to which the cache backs up data.

strategy

ASYNC	Enables asynchronous mode.
SYNC	Enables synchronous mode.

ASYNC

Sets the strategy for backing up to a remote site.

failure-policy

IGNORE	Ignore failed backup operations and write to the local cache.
WARN	Log exceptions when backup operations fail and write to the local cache.
FAIL	Throw exceptions when backup operations fail and attempt to stop writes to the local cache.
CUSTOM	Use a custom failure policy. Requires the "failure-policy-class" attribute.

WARN

Controls how local writes to caches are handled if synchronous backup operations fail.

timeout

long

15000

Specifies timeout, in milliseconds, for synchronous and asynchronous backup operations.

enabled

boolean

true

Enables backup locations. Set the value to "false" to disable backups.

two-phase-commit

boolean

false

Enables two-phase commits for optimistic transactional caches with the synchronous backup strategy only.

failure-policy-class

string

Specifies the fully qualified name of a class that implements the CustomFailurePolicy interface. Use if failure-policy="CUSTOM".

take-offline?

Specifies the number of failures that can occur before backup locations go offline.

Name	Type	Default	Description
after-failures	int	0	Sets the number of consecutive failures that can occur for backup operations before sites go offline. Specify a negative or zero value to ignore this attribute and use minimum wait time only ("min-wait").
min-wait	long	0	Sets the minimum time to wait, in milliseconds, before sites go offline when backup operations fail. If subsequent operations are successful, the minimum wait time is reset. If you set "after-failures", sites go offline when the wait time is reached and the number of failures occur.

state-transfer?

Modifies state transfer operations.

Name	Type	Default	Description
chunk-size	int	512	Specifies how many cache entries are batched in each transfer request.
timeout	long	1200000	The time (in milliseconds) to wait for the backup site acknowledge the state chunk received and applied. Default value is 20 min.
max-retries	int	30	Sets the maximum number of retry attempts for push state failures. Specify a value of 0 (zero) to disable retry attempts. The default value is 30.
wait-time	long	2000	Sets the amount of time, in milliseconds, to wait between retry attempts for push state failures. You must specify a value of 1 or more. The default value is 2000.

backup-for?

Defines the local cache as a backup for a remote cache with a different name.

Name	Type	Default	Description
remote-cache	string		Specifies the name of the remote cache that uses the local cache as a backup.
remote-site	string		Specifies the name of the remote site that backs up data to the local cache.

encoding?

The cache encoding configuration.

Defines content type and encoding for keys and values of the cache.

key

Describes the content-type and encoding.

Name	Type	Default	Description
media-type	string

value

Describes the content-type and encoding.

Name	Type	Default	Description
media-type	string

locking?

The locking configuration of the cache.

Name

Type

Default

Description

isolation

NONE	No locking isolation will be performed. This is only valid in local mode. In clustered mode, READ_COMMITTED will be used instead.
READ_UNCOMMITTED	Unsupported. Actually configures READ_COMMITTED
READ_COMMITTED	Read committed is an isolation level that guarantees that any data read is committed at the moment it is read. However, depending on the outcome of other transactions, successive reads may return different results
REPEATABLE_READ	Repeatable read is an isolation level that guarantees that any data read is committed at the moment it is read and that, within a transaction, successive reads will always return the same data.
SERIALIZABLE	Unsupported. Actually configures REPEATABLE_READ

REPEATABLE_READ

Sets the cache locking isolation level. Infinispan only supports READ_COMMITTED or REPEATABLE_READ isolation level.

striping

boolean

false

acquire-timeout

long

10000

Maximum time to attempt a particular lock acquisition.

concurrency-level

int

Concurrency level for lock containers. Adjust this value according to the number of concurrent threads interacting with Infinispan.

transaction?

The cache transaction configuration.

Name

Type

Default

Description

mode

NONE	Cache will not enlist within transactions.
BATCH	Uses batching to group cache operations together.
NON_XA	Cache will enlist within transactions as a javax.transaction.Synchronization
NON_DURABLE_XA	Cache will enlist within transactions as a javax.transaction.xa.XAResource, without recovery.
FULL_XA	Cache will enlist within transactions as a javax.transaction.xa.XAResource, with recovery.

NONE

Sets the cache transaction mode to one of NONE, BATCH, NON_XA, NON_DURABLE_XA, FULL_XA.

stop-timeout

long

30000

locking

OPTIMISTIC	Enables Optimistic locking.
PESSIMISTIC	Enables Pessimistic locking.

OPTIMISTIC

The locking mode for this cache, one of OPTIMISTIC or PESSIMISTIC.

transaction-manager-lookup

string

org.infinispan.transaction.lookup.GenericTransactionManagerLookup

Configure Transaction manager lookup directly using an instance of TransactionManagerLookup. Calling this method marks the cache as transactional.

complete-timeout

long

60000

The duration (millis) in which to keep information about the completion of a transaction. Defaults to 60000.

reaper-interval

long

30000

The time interval (millis) at which the thread that cleans up transaction completion information kicks in. Defaults to 30000.

auto-commit

boolean

true

protocol

DEFAULT
TOTAL_ORDER

(Deprecated, Total Order will be removed) Configures the commit protocol to use.

recovery-cache

string

__recoveryInfoCacheName__

Sets the name of the cache where recovery related information is held. The cache's default name is "__recoveryInfoCacheName__"

notifications

boolean

true

Enables or disables triggering transactional notifications on cache listeners. By default is enabled.

expiration?

The cache expiration configuration.

Name	Type	Default	Description
max-idle	long	-1	Specifies the maximum amount of time, in milliseconds, that cache entries can remain idle. If no operations are performed on entries within the maximum idle time, the entries expire across the cluster. A value of 0 or -1 disables expiration.
lifespan	long	-1	Specifies the maximum amount of time, in milliseconds, that cache entries can exist. After reaching their lifespan, cache entries expire across the cluster. A value of 0 or -1 disables expiration.
interval	long	60000	Specifies the interval, in milliseconds, between expiration runs. A value of 0 or -1 disables the expiration reaper.

store-as-binary?

Configures the cache to store data in binary format.

Name	Type	Default	Description
keys	boolean		Specify whether keys are stored as binary or not. Enabled by default if the "enabled" attribute is set to true.
values	boolean		Specify whether values are stored as binary or not. Enabled by default if the "enabled" attribute is set to true.

persistence?

Configures the persistence layer for caches.

Name	Type	Default	Description
passivation	boolean	false	Enables passivation so that data is written to cache stores only if it is evicted from memory. Subsequent requests for passivated entries restore them to memory and remove them from persistent storage. If you do not enable passivation, writes to entries in memory result in writes to cache stores.
connection-attempts	int	10	Sets the maximum number of attempts to start each configured `CacheWriter` or `CacheLoader`. An exception is thrown and the cache does not start if the number of connection attempts exceeds the maximum.
connection-interval	int	50	Specifies the time, in milliseconds, to wait between connection attempts on startup. A negative or zero value means no wait between connection attempts.
availability-interval	int	1000	Specifies the time, in milliseconds, between availability checks to determine if the PersistenceManager is available. In other words, this interval sets how often stores and loaders are polled via their `org.infinispan.persistence.spi.CacheWriter#isAvailable` or `org.infinispan.persistence.spi.CacheLoader#isAvailable` implementation. If a single store or loader is not available, an exception is thrown during cache operations.

cluster-loader

Defines a cluster cache loader.

Name	Type	Default	Description
remote-timeout	long	15000	The timeout when performing remote calls.

Name	Type	Default	Description
name	string		Unused XML attribute.
shared	boolean	false	Determines if a cache loader is shared between cache instances. Values are true / false (default). This property prevents duplicate writes of data to the cache loader by different cache instances. An example is where all cache instances in a cluster use the same JDBC settings for the same remote, shared database. If true, only the nodes where modifications originate write to the cache store. If false, each cache reacts to potential remote updates by storing the data to the cache store.
preload	boolean	false	Pre-loads data into memory from the cache loader when the cache starts. Values are true / false (default). This property is useful when data in the cache loader is required immediately after startup to prevent delays with cache operations when the data is loaded lazily. This property can provide a "warm cache" on startup but it impacts performance because it affects start time. Pre-loading data is done locally, so any data loaded is stored locally in the node only. Pre-loaded data is not replicated or distributed. Likewise, data is pre-loaded only up to the maximum configured number of entries in eviction.

property*

A cache loader property with name and value.

store

Defines a custom cache store.

Name	Type	Default	Description
class	string		Defines the class name of a cache store that implements either `CacheLoader`, `CacheWriter`, or both.

Name	Type	Default	Description
shared	boolean	false	This setting should be set to true when multiple cache instances share the same cache store (e.g., multiple nodes in a cluster using a JDBC-based CacheStore pointing to the same, shared database.) Setting this to true avoids multiple cache instances writing the same modification multiple times. If enabled, only the node where the modification originated will write to the cache store. If disabled, each individual cache reacts to a potential remote update by storing the data to the cache store.
transactional	boolean	false	This setting should be set to true when the underlying cache store supports transactions and it is desirable for the underlying store and the cache to remain synchronized. With this enabled any Exceptions thrown whilst writing to the underlying store will result in both the store's and cache's transactions rollingback.
preload	boolean	false	If true, when the cache starts, data stored in the cache store will be pre-loaded into memory. This is particularly useful when data in the cache store will be needed immediately after startup and you want to avoid cache operations being delayed as a result of loading this data lazily. Can be used to provide a 'warm-cache' on startup, however there is a performance penalty as startup time is affected by this process.
fetch-state	boolean	false	Fetches the persistent state of a cache when joining a cluster. Values are true / false (default). The purpose of this property is to retrieve the persistent state of a cache and apply it to the local cache store of a node when it joins a cluster. Fetching the persistent state does not apply if a cache store is shared because it accesses the same data as the other stores. This property can be `true` for one configured cache loader only. If more than one cache loader fetches the persistent state, a configuration exception is thrown when the cache service starts.
purge	boolean	false	Empties the specified cache loader at startup. Values are true / false (default). This property takes effect only if read-only is false.
read-only	boolean	false	Prevents data from being persisted to cache stores. Values are true / false (default). If true, cache stores load entries only. Any modifications to data in the cache do not apply to cache stores.
max-batch-size	int	100	Sets the maximum size of a batch to insert or delete from the cache store. If the value is less than one, no upper limit applies to the number of operations in a batch.
segmented	boolean	true	Configures cache stores to store data in hash space segments, with the "hash.numSegments" property defining the number of segments.

write-behind?

Configures cache stores as write-behind instead of write-through.

Name	Type	Default	Description
modification-queue-size	int	1024	Specifies the maximum number of entries in the asynchronous modification queue. When the queue is full, write-through mode is used until the queue can accept new entries.
thread-pool-size	int	1	Specifies the number of threads to apply modifications to the cache store.
fail-silently	boolean	false	Controls how asynchronous write operations take place when cache stores become unavailable. If "true", asynchronous write operations that fail are re-attempted with the number of times specified in the "connection-attempts" parameter. If all attempts fail, errors are ignored and write operations are not executed on the cache store. If "false", asynchronous write operations that fail are re-attempted when the underlying store becomes available. If the modification queue becomes full before the underlying store becomes available, an error is thrown on all future write operations to the store until the modification queue is flushed. The modification queue is not persisted. If the underlying store does not become available before the asynchronous store is stopped, queued modifications are lost.

property*

Defines a cache store property with name and value.

file-store

Defines a filesystem-based cache store.

Name	Type	Description
max-entries	int	Specifies the maximum number of entries that the file store can hold. To increase the speed of lookups, Single File cache stores index keys and their locations in the file. To avoid excessive memory usage, you can configure the maximum number of entries so that entries are removed permanently from both memory and the cache store when the maximum is exceeded. However, this can lead to data loss. You should only set a maximum number of entries if data can be recomputed or retrieved from an authoritative data store. By default, the value is `-1` which means that there is no maximum number of entries.
relative-to	string	Defines the root path on the file system where data is stored.
path	string	Specifies a filesystem directory for data. The value can be a relative or absolute path. Relative paths are created relative to the configured global persistent location. Absolute paths must be subdirectories of the global persistent location, otherwise an exception is thrown.

Name	Type	Default	Description
shared	boolean	false	This setting should be set to true when multiple cache instances share the same cache store (e.g., multiple nodes in a cluster using a JDBC-based CacheStore pointing to the same, shared database.) Setting this to true avoids multiple cache instances writing the same modification multiple times. If enabled, only the node where the modification originated will write to the cache store. If disabled, each individual cache reacts to a potential remote update by storing the data to the cache store.
transactional	boolean	false	This setting should be set to true when the underlying cache store supports transactions and it is desirable for the underlying store and the cache to remain synchronized. With this enabled any Exceptions thrown whilst writing to the underlying store will result in both the store's and cache's transactions rollingback.
preload	boolean	false	If true, when the cache starts, data stored in the cache store will be pre-loaded into memory. This is particularly useful when data in the cache store will be needed immediately after startup and you want to avoid cache operations being delayed as a result of loading this data lazily. Can be used to provide a 'warm-cache' on startup, however there is a performance penalty as startup time is affected by this process.
fetch-state	boolean	false	Fetches the persistent state of a cache when joining a cluster. Values are true / false (default). The purpose of this property is to retrieve the persistent state of a cache and apply it to the local cache store of a node when it joins a cluster. Fetching the persistent state does not apply if a cache store is shared because it accesses the same data as the other stores. This property can be `true` for one configured cache loader only. If more than one cache loader fetches the persistent state, a configuration exception is thrown when the cache service starts.
purge	boolean	false	Empties the specified cache loader at startup. Values are true / false (default). This property takes effect only if read-only is false.
read-only	boolean	false	Prevents data from being persisted to cache stores. Values are true / false (default). If true, cache stores load entries only. Any modifications to data in the cache do not apply to cache stores.
max-batch-size	int	100	Sets the maximum size of a batch to insert or delete from the cache store. If the value is less than one, no upper limit applies to the number of operations in a batch.
segmented	boolean	true	Configures cache stores to store data in hash space segments, with the "hash.numSegments" property defining the number of segments.

write-behind?

Configures cache stores as write-behind instead of write-through.

Name	Type	Default	Description
modification-queue-size	int	1024	Specifies the maximum number of entries in the asynchronous modification queue. When the queue is full, write-through mode is used until the queue can accept new entries.
thread-pool-size	int	1	Specifies the number of threads to apply modifications to the cache store.
fail-silently	boolean	false	Controls how asynchronous write operations take place when cache stores become unavailable. If "true", asynchronous write operations that fail are re-attempted with the number of times specified in the "connection-attempts" parameter. If all attempts fail, errors are ignored and write operations are not executed on the cache store. If "false", asynchronous write operations that fail are re-attempted when the underlying store becomes available. If the modification queue becomes full before the underlying store becomes available, an error is thrown on all future write operations to the store until the modification queue is flushed. The modification queue is not persisted. If the underlying store does not become available before the asynchronous store is stopped, queued modifications are lost.

property*

Defines a cache store property with name and value.

memory?

Controls how the entries are stored in memory

object

Store keys and values as instance variables in the Java heap. Instances of byte[] are wrapped to ensure equality. This is the default storage format.

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs when the number of entries exceeds the size.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

binary

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs either when the number of entries or amount of memory exceeds the size.

eviction

COUNT	Evict entries from the cache when the number of entries reaches the configured size.
MEMORY	Evict entries from the cache when the amount of memory in use reaches the configured size.

Specifies whether eviction is based on the number of entries or the amount of memory used.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

off-heap

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs either when the number of entries or amount of memory exceeds the size.

eviction

COUNT	Evict entries from the cache when the number of entries reaches the configured size.
MEMORY	Evict entries from the cache when the amount of memory in use reaches the configured size.

Specifies whether eviction is based on the number of entries or the amount of memory used.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

indexing?

Defines indexing options for cache

Name

Type

Default

Description

index

NONE	Do not index data. This is the default.
LOCAL	Only index changes made locally, ignoring remote changes. This is useful if indexes are shared across a cluster to prevent redundant indexing of updates.
ALL	Index all data
PRIMARY_OWNER	Only index changes on the primary owner, regardless of it's local or remote.

NONE

The indexing mode of the cache. Defaults to NONE.

auto-config

boolean

false

Whether or not to apply automatic index configuration based on cache type

key-transformers?

Defines the Transformers used to stringify keys for indexing with Lucene

key-transformer*

Defines the Transformer to use for the specified key class

Name	Type	Default	Description
key	string
transformer	string

indexed-entities?

Defines the indexed entity classes

indexed-entity*

Indexed entity class name

property*

Property to pass on to the indexing system

custom-interceptors?

Deprecated since 10.0, will be removed without a replacement. Configures custom interceptors to be added to the cache.

interceptor*

Deprecated since 10.0, will be removed without a replacement.

Name	Type	Description
after	string	Dictates that the custom interceptor appears immediately after the specified interceptor. If the specified interceptor is not found in the interceptor chain, a ConfigurationException will be thrown when the cache starts.
before	string	Dictates that the custom interceptor appears immediately before the specified interceptor. If the specified interceptor is not found in the interceptor chain, a ConfigurationException will be thrown when the cache starts.
class	string	A fully qualified class name of the new custom interceptor to add to the configuration.
index	int	Specifies a position in the interceptor chain to place the new interceptor. The index starts at 0 and goes up to the number of interceptors in a given configuration. A ConfigurationException is thrown if the index is less than 0 or greater than the maximum number of interceptors in the chain.
position	string	Specifies a position where to place the new interceptor. Allowed values are FIRST, LAST, and OTHER_THAN_FIRST_OR_LAST

property?

security?

Configures cache-level security.

authorization?

Configures authorization for this cache.

Name	Type	Default	Description
enabled	boolean	false	Enables authorization checks for this cache. Defaults to true if the authorization element is present.
roles			Sets the valid roles required to access this cache.

invalidation-cache

Defines an INVALIDATION_* mode cache.

Name

Type

Default

Description

mode

ASYNC	Enables asynchronous mode.
SYNC	Enables synchronous mode.

SYNC

Sets the clustered cache mode, ASYNC for asynchronous operation, or SYNC for synchronous operation.

remote-timeout

long

15000

In SYNC mode, the timeout (in ms) used to wait for an acknowledgment when making a remote call, after which the call is aborted and an exception is thrown.

partition-handling?

Configures the way this cache reacts to node crashes and split brains.

Name

Type

Default

Description

enabled

boolean

Deprecated, use type instead. Enable/disable the partition handling functionality. Defaults to false.

when-split

DENY_READ_WRITES	If the partition does not have all owners for a given segment, both reads and writes are denied for all keys in that segment.
ALLOW_READS	Allows reads for a given key if it exists in this partition, but only allows writes if this partition contains all owners of a segment.
ALLOW_READ_WRITES	Allow entries on each partition to diverge, with conflicts resolved during merge.

ALLOW_READ_WRITES

The type of actions that are possible when a split brain scenario is encountered.

merge-policy

NONE

The entry merge policy which should be applied on partition merges.

Name	Type	Default	Description
name	ID		Uniquely identifies this cache within its cache container.
configuration	IDREF		The name of the cache configuration which this configuration inherits from.
start	FIXME		Unused XML attribute
jndi-name	string		Unused XML attribute
module	string		Unused XML attribute
statistics	boolean	false	Determines whether or not the cache should collect statistics. Keep disabled for optimal performance.
statistics-available	boolean	true	If set to false, statistics gathering cannot be enabled during runtime. Keep disabled for optimal performance.
unreliable-return-values	boolean	false	Specifies whether Infinispan is allowed to disregard the Map contract when providing return values for org.infinispan.Cache#put(Object, Object) and org.infinispan.Cache#remove(Object) methods.

backups?

Defines backup locations for cache data and modifies state transfer properties.

backup*

Configures a remote site as a backup location for cache data.

Name

Type

Default

Description

site

string

Names the remote site to which the cache backs up data.

strategy

ASYNC	Enables asynchronous mode.
SYNC	Enables synchronous mode.

ASYNC

Sets the strategy for backing up to a remote site.

failure-policy

IGNORE	Ignore failed backup operations and write to the local cache.
WARN	Log exceptions when backup operations fail and write to the local cache.
FAIL	Throw exceptions when backup operations fail and attempt to stop writes to the local cache.
CUSTOM	Use a custom failure policy. Requires the "failure-policy-class" attribute.

WARN

Controls how local writes to caches are handled if synchronous backup operations fail.

timeout

long

15000

Specifies timeout, in milliseconds, for synchronous and asynchronous backup operations.

enabled

boolean

true

Enables backup locations. Set the value to "false" to disable backups.

two-phase-commit

boolean

false

Enables two-phase commits for optimistic transactional caches with the synchronous backup strategy only.

failure-policy-class

string

Specifies the fully qualified name of a class that implements the CustomFailurePolicy interface. Use if failure-policy="CUSTOM".

take-offline?

Specifies the number of failures that can occur before backup locations go offline.

Name	Type	Default	Description
after-failures	int	0	Sets the number of consecutive failures that can occur for backup operations before sites go offline. Specify a negative or zero value to ignore this attribute and use minimum wait time only ("min-wait").
min-wait	long	0	Sets the minimum time to wait, in milliseconds, before sites go offline when backup operations fail. If subsequent operations are successful, the minimum wait time is reset. If you set "after-failures", sites go offline when the wait time is reached and the number of failures occur.

state-transfer?

Modifies state transfer operations.

Name	Type	Default	Description
chunk-size	int	512	Specifies how many cache entries are batched in each transfer request.
timeout	long	1200000	The time (in milliseconds) to wait for the backup site acknowledge the state chunk received and applied. Default value is 20 min.
max-retries	int	30	Sets the maximum number of retry attempts for push state failures. Specify a value of 0 (zero) to disable retry attempts. The default value is 30.
wait-time	long	2000	Sets the amount of time, in milliseconds, to wait between retry attempts for push state failures. You must specify a value of 1 or more. The default value is 2000.

backup-for?

Defines the local cache as a backup for a remote cache with a different name.

Name	Type	Default	Description
remote-cache	string		Specifies the name of the remote cache that uses the local cache as a backup.
remote-site	string		Specifies the name of the remote site that backs up data to the local cache.

encoding?

The cache encoding configuration.

Defines content type and encoding for keys and values of the cache.

key

Describes the content-type and encoding.

Name	Type	Default	Description
media-type	string

value

Describes the content-type and encoding.

Name	Type	Default	Description
media-type	string

locking?

The locking configuration of the cache.

Name

Type

Default

Description

isolation

NONE	No locking isolation will be performed. This is only valid in local mode. In clustered mode, READ_COMMITTED will be used instead.
READ_UNCOMMITTED	Unsupported. Actually configures READ_COMMITTED
READ_COMMITTED	Read committed is an isolation level that guarantees that any data read is committed at the moment it is read. However, depending on the outcome of other transactions, successive reads may return different results
REPEATABLE_READ	Repeatable read is an isolation level that guarantees that any data read is committed at the moment it is read and that, within a transaction, successive reads will always return the same data.
SERIALIZABLE	Unsupported. Actually configures REPEATABLE_READ

REPEATABLE_READ

Sets the cache locking isolation level. Infinispan only supports READ_COMMITTED or REPEATABLE_READ isolation level.

striping

boolean

false

acquire-timeout

long

10000

Maximum time to attempt a particular lock acquisition.

concurrency-level

int

Concurrency level for lock containers. Adjust this value according to the number of concurrent threads interacting with Infinispan.

transaction?

The cache transaction configuration.

Name

Type

Default

Description

mode

NONE	Cache will not enlist within transactions.
BATCH	Uses batching to group cache operations together.
NON_XA	Cache will enlist within transactions as a javax.transaction.Synchronization
NON_DURABLE_XA	Cache will enlist within transactions as a javax.transaction.xa.XAResource, without recovery.
FULL_XA	Cache will enlist within transactions as a javax.transaction.xa.XAResource, with recovery.

NONE

Sets the cache transaction mode to one of NONE, BATCH, NON_XA, NON_DURABLE_XA, FULL_XA.

stop-timeout

long

30000

locking

OPTIMISTIC	Enables Optimistic locking.
PESSIMISTIC	Enables Pessimistic locking.

OPTIMISTIC

The locking mode for this cache, one of OPTIMISTIC or PESSIMISTIC.

transaction-manager-lookup

string

org.infinispan.transaction.lookup.GenericTransactionManagerLookup

Configure Transaction manager lookup directly using an instance of TransactionManagerLookup. Calling this method marks the cache as transactional.

complete-timeout

long

60000

The duration (millis) in which to keep information about the completion of a transaction. Defaults to 60000.

reaper-interval

long

30000

The time interval (millis) at which the thread that cleans up transaction completion information kicks in. Defaults to 30000.

auto-commit

boolean

true

protocol

DEFAULT
TOTAL_ORDER

(Deprecated, Total Order will be removed) Configures the commit protocol to use.

recovery-cache

string

__recoveryInfoCacheName__

Sets the name of the cache where recovery related information is held. The cache's default name is "__recoveryInfoCacheName__"

notifications

boolean

true

Enables or disables triggering transactional notifications on cache listeners. By default is enabled.

expiration?

The cache expiration configuration.

Name	Type	Default	Description
max-idle	long	-1	Specifies the maximum amount of time, in milliseconds, that cache entries can remain idle. If no operations are performed on entries within the maximum idle time, the entries expire across the cluster. A value of 0 or -1 disables expiration.
lifespan	long	-1	Specifies the maximum amount of time, in milliseconds, that cache entries can exist. After reaching their lifespan, cache entries expire across the cluster. A value of 0 or -1 disables expiration.
interval	long	60000	Specifies the interval, in milliseconds, between expiration runs. A value of 0 or -1 disables the expiration reaper.

store-as-binary?

Configures the cache to store data in binary format.

Name	Type	Default	Description
keys	boolean		Specify whether keys are stored as binary or not. Enabled by default if the "enabled" attribute is set to true.
values	boolean		Specify whether values are stored as binary or not. Enabled by default if the "enabled" attribute is set to true.

persistence?

Configures the persistence layer for caches.

Name	Type	Default	Description
passivation	boolean	false	Enables passivation so that data is written to cache stores only if it is evicted from memory. Subsequent requests for passivated entries restore them to memory and remove them from persistent storage. If you do not enable passivation, writes to entries in memory result in writes to cache stores.
connection-attempts	int	10	Sets the maximum number of attempts to start each configured `CacheWriter` or `CacheLoader`. An exception is thrown and the cache does not start if the number of connection attempts exceeds the maximum.
connection-interval	int	50	Specifies the time, in milliseconds, to wait between connection attempts on startup. A negative or zero value means no wait between connection attempts.
availability-interval	int	1000	Specifies the time, in milliseconds, between availability checks to determine if the PersistenceManager is available. In other words, this interval sets how often stores and loaders are polled via their `org.infinispan.persistence.spi.CacheWriter#isAvailable` or `org.infinispan.persistence.spi.CacheLoader#isAvailable` implementation. If a single store or loader is not available, an exception is thrown during cache operations.

cluster-loader

Defines a cluster cache loader.

Name	Type	Default	Description
remote-timeout	long	15000	The timeout when performing remote calls.

Name	Type	Default	Description
name	string		Unused XML attribute.
shared	boolean	false	Determines if a cache loader is shared between cache instances. Values are true / false (default). This property prevents duplicate writes of data to the cache loader by different cache instances. An example is where all cache instances in a cluster use the same JDBC settings for the same remote, shared database. If true, only the nodes where modifications originate write to the cache store. If false, each cache reacts to potential remote updates by storing the data to the cache store.
preload	boolean	false	Pre-loads data into memory from the cache loader when the cache starts. Values are true / false (default). This property is useful when data in the cache loader is required immediately after startup to prevent delays with cache operations when the data is loaded lazily. This property can provide a "warm cache" on startup but it impacts performance because it affects start time. Pre-loading data is done locally, so any data loaded is stored locally in the node only. Pre-loaded data is not replicated or distributed. Likewise, data is pre-loaded only up to the maximum configured number of entries in eviction.

property*

A cache loader property with name and value.

store

Defines a custom cache store.

Name	Type	Default	Description
class	string		Defines the class name of a cache store that implements either `CacheLoader`, `CacheWriter`, or both.

Name	Type	Default	Description
shared	boolean	false	This setting should be set to true when multiple cache instances share the same cache store (e.g., multiple nodes in a cluster using a JDBC-based CacheStore pointing to the same, shared database.) Setting this to true avoids multiple cache instances writing the same modification multiple times. If enabled, only the node where the modification originated will write to the cache store. If disabled, each individual cache reacts to a potential remote update by storing the data to the cache store.
transactional	boolean	false	This setting should be set to true when the underlying cache store supports transactions and it is desirable for the underlying store and the cache to remain synchronized. With this enabled any Exceptions thrown whilst writing to the underlying store will result in both the store's and cache's transactions rollingback.
preload	boolean	false	If true, when the cache starts, data stored in the cache store will be pre-loaded into memory. This is particularly useful when data in the cache store will be needed immediately after startup and you want to avoid cache operations being delayed as a result of loading this data lazily. Can be used to provide a 'warm-cache' on startup, however there is a performance penalty as startup time is affected by this process.
fetch-state	boolean	false	Fetches the persistent state of a cache when joining a cluster. Values are true / false (default). The purpose of this property is to retrieve the persistent state of a cache and apply it to the local cache store of a node when it joins a cluster. Fetching the persistent state does not apply if a cache store is shared because it accesses the same data as the other stores. This property can be `true` for one configured cache loader only. If more than one cache loader fetches the persistent state, a configuration exception is thrown when the cache service starts.
purge	boolean	false	Empties the specified cache loader at startup. Values are true / false (default). This property takes effect only if read-only is false.
read-only	boolean	false	Prevents data from being persisted to cache stores. Values are true / false (default). If true, cache stores load entries only. Any modifications to data in the cache do not apply to cache stores.
max-batch-size	int	100	Sets the maximum size of a batch to insert or delete from the cache store. If the value is less than one, no upper limit applies to the number of operations in a batch.
segmented	boolean	true	Configures cache stores to store data in hash space segments, with the "hash.numSegments" property defining the number of segments.

write-behind?

Configures cache stores as write-behind instead of write-through.

Name	Type	Default	Description
modification-queue-size	int	1024	Specifies the maximum number of entries in the asynchronous modification queue. When the queue is full, write-through mode is used until the queue can accept new entries.
thread-pool-size	int	1	Specifies the number of threads to apply modifications to the cache store.
fail-silently	boolean	false	Controls how asynchronous write operations take place when cache stores become unavailable. If "true", asynchronous write operations that fail are re-attempted with the number of times specified in the "connection-attempts" parameter. If all attempts fail, errors are ignored and write operations are not executed on the cache store. If "false", asynchronous write operations that fail are re-attempted when the underlying store becomes available. If the modification queue becomes full before the underlying store becomes available, an error is thrown on all future write operations to the store until the modification queue is flushed. The modification queue is not persisted. If the underlying store does not become available before the asynchronous store is stopped, queued modifications are lost.

property*

Defines a cache store property with name and value.

file-store

Defines a filesystem-based cache store.

Name	Type	Description
max-entries	int	Specifies the maximum number of entries that the file store can hold. To increase the speed of lookups, Single File cache stores index keys and their locations in the file. To avoid excessive memory usage, you can configure the maximum number of entries so that entries are removed permanently from both memory and the cache store when the maximum is exceeded. However, this can lead to data loss. You should only set a maximum number of entries if data can be recomputed or retrieved from an authoritative data store. By default, the value is `-1` which means that there is no maximum number of entries.
relative-to	string	Defines the root path on the file system where data is stored.
path	string	Specifies a filesystem directory for data. The value can be a relative or absolute path. Relative paths are created relative to the configured global persistent location. Absolute paths must be subdirectories of the global persistent location, otherwise an exception is thrown.

Name	Type	Default	Description
shared	boolean	false	This setting should be set to true when multiple cache instances share the same cache store (e.g., multiple nodes in a cluster using a JDBC-based CacheStore pointing to the same, shared database.) Setting this to true avoids multiple cache instances writing the same modification multiple times. If enabled, only the node where the modification originated will write to the cache store. If disabled, each individual cache reacts to a potential remote update by storing the data to the cache store.
transactional	boolean	false	This setting should be set to true when the underlying cache store supports transactions and it is desirable for the underlying store and the cache to remain synchronized. With this enabled any Exceptions thrown whilst writing to the underlying store will result in both the store's and cache's transactions rollingback.
preload	boolean	false	If true, when the cache starts, data stored in the cache store will be pre-loaded into memory. This is particularly useful when data in the cache store will be needed immediately after startup and you want to avoid cache operations being delayed as a result of loading this data lazily. Can be used to provide a 'warm-cache' on startup, however there is a performance penalty as startup time is affected by this process.
fetch-state	boolean	false	Fetches the persistent state of a cache when joining a cluster. Values are true / false (default). The purpose of this property is to retrieve the persistent state of a cache and apply it to the local cache store of a node when it joins a cluster. Fetching the persistent state does not apply if a cache store is shared because it accesses the same data as the other stores. This property can be `true` for one configured cache loader only. If more than one cache loader fetches the persistent state, a configuration exception is thrown when the cache service starts.
purge	boolean	false	Empties the specified cache loader at startup. Values are true / false (default). This property takes effect only if read-only is false.
read-only	boolean	false	Prevents data from being persisted to cache stores. Values are true / false (default). If true, cache stores load entries only. Any modifications to data in the cache do not apply to cache stores.
max-batch-size	int	100	Sets the maximum size of a batch to insert or delete from the cache store. If the value is less than one, no upper limit applies to the number of operations in a batch.
segmented	boolean	true	Configures cache stores to store data in hash space segments, with the "hash.numSegments" property defining the number of segments.

write-behind?

Configures cache stores as write-behind instead of write-through.

Name	Type	Default	Description
modification-queue-size	int	1024	Specifies the maximum number of entries in the asynchronous modification queue. When the queue is full, write-through mode is used until the queue can accept new entries.
thread-pool-size	int	1	Specifies the number of threads to apply modifications to the cache store.
fail-silently	boolean	false	Controls how asynchronous write operations take place when cache stores become unavailable. If "true", asynchronous write operations that fail are re-attempted with the number of times specified in the "connection-attempts" parameter. If all attempts fail, errors are ignored and write operations are not executed on the cache store. If "false", asynchronous write operations that fail are re-attempted when the underlying store becomes available. If the modification queue becomes full before the underlying store becomes available, an error is thrown on all future write operations to the store until the modification queue is flushed. The modification queue is not persisted. If the underlying store does not become available before the asynchronous store is stopped, queued modifications are lost.

property*

Defines a cache store property with name and value.

memory?

Controls how the entries are stored in memory

object

Store keys and values as instance variables in the Java heap. Instances of byte[] are wrapped to ensure equality. This is the default storage format.

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs when the number of entries exceeds the size.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

binary

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs either when the number of entries or amount of memory exceeds the size.

eviction

COUNT	Evict entries from the cache when the number of entries reaches the configured size.
MEMORY	Evict entries from the cache when the amount of memory in use reaches the configured size.

Specifies whether eviction is based on the number of entries or the amount of memory used.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

off-heap

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs either when the number of entries or amount of memory exceeds the size.

eviction

COUNT	Evict entries from the cache when the number of entries reaches the configured size.
MEMORY	Evict entries from the cache when the amount of memory in use reaches the configured size.

Specifies whether eviction is based on the number of entries or the amount of memory used.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

indexing?

Defines indexing options for cache

Name

Type

Default

Description

index

NONE	Do not index data. This is the default.
LOCAL	Only index changes made locally, ignoring remote changes. This is useful if indexes are shared across a cluster to prevent redundant indexing of updates.
ALL	Index all data
PRIMARY_OWNER	Only index changes on the primary owner, regardless of it's local or remote.

NONE

The indexing mode of the cache. Defaults to NONE.

auto-config

boolean

false

Whether or not to apply automatic index configuration based on cache type

key-transformers?

Defines the Transformers used to stringify keys for indexing with Lucene

key-transformer*

Defines the Transformer to use for the specified key class

Name	Type	Default	Description
key	string
transformer	string

indexed-entities?

Defines the indexed entity classes

indexed-entity*

Indexed entity class name

property*

Property to pass on to the indexing system

custom-interceptors?

Deprecated since 10.0, will be removed without a replacement. Configures custom interceptors to be added to the cache.

interceptor*

Deprecated since 10.0, will be removed without a replacement.

Name	Type	Description
after	string	Dictates that the custom interceptor appears immediately after the specified interceptor. If the specified interceptor is not found in the interceptor chain, a ConfigurationException will be thrown when the cache starts.
before	string	Dictates that the custom interceptor appears immediately before the specified interceptor. If the specified interceptor is not found in the interceptor chain, a ConfigurationException will be thrown when the cache starts.
class	string	A fully qualified class name of the new custom interceptor to add to the configuration.
index	int	Specifies a position in the interceptor chain to place the new interceptor. The index starts at 0 and goes up to the number of interceptors in a given configuration. A ConfigurationException is thrown if the index is less than 0 or greater than the maximum number of interceptors in the chain.
position	string	Specifies a position where to place the new interceptor. Allowed values are FIRST, LAST, and OTHER_THAN_FIRST_OR_LAST

property?

security?

Configures cache-level security.

authorization?

Configures authorization for this cache.

Name	Type	Default	Description
enabled	boolean	false	Enables authorization checks for this cache. Defaults to true if the authorization element is present.
roles			Sets the valid roles required to access this cache.

invalidation-cache-configuration

Defines an INVALIDATION_* mode cache configuration.

Name

Type

Default

Description

mode

ASYNC	Enables asynchronous mode.
SYNC	Enables synchronous mode.

SYNC

Sets the clustered cache mode, ASYNC for asynchronous operation, or SYNC for synchronous operation.

remote-timeout

long

15000

In SYNC mode, the timeout (in ms) used to wait for an acknowledgment when making a remote call, after which the call is aborted and an exception is thrown.

partition-handling?

Configures the way this cache reacts to node crashes and split brains.

Name

Type

Default

Description

enabled

boolean

Deprecated, use type instead. Enable/disable the partition handling functionality. Defaults to false.

when-split

DENY_READ_WRITES	If the partition does not have all owners for a given segment, both reads and writes are denied for all keys in that segment.
ALLOW_READS	Allows reads for a given key if it exists in this partition, but only allows writes if this partition contains all owners of a segment.
ALLOW_READ_WRITES	Allow entries on each partition to diverge, with conflicts resolved during merge.

ALLOW_READ_WRITES

The type of actions that are possible when a split brain scenario is encountered.

merge-policy

NONE

The entry merge policy which should be applied on partition merges.

Name	Type	Default	Description
name	ID		Uniquely identifies this cache within its cache container.
configuration	IDREF		The name of the cache configuration which this configuration inherits from.
start	FIXME		Unused XML attribute
jndi-name	string		Unused XML attribute
module	string		Unused XML attribute
statistics	boolean	false	Determines whether or not the cache should collect statistics. Keep disabled for optimal performance.
statistics-available	boolean	true	If set to false, statistics gathering cannot be enabled during runtime. Keep disabled for optimal performance.
unreliable-return-values	boolean	false	Specifies whether Infinispan is allowed to disregard the Map contract when providing return values for org.infinispan.Cache#put(Object, Object) and org.infinispan.Cache#remove(Object) methods.

backups?

Defines backup locations for cache data and modifies state transfer properties.

backup*

Configures a remote site as a backup location for cache data.

Name

Type

Default

Description

site

string

Names the remote site to which the cache backs up data.

strategy

ASYNC	Enables asynchronous mode.
SYNC	Enables synchronous mode.

ASYNC

Sets the strategy for backing up to a remote site.

failure-policy

IGNORE	Ignore failed backup operations and write to the local cache.
WARN	Log exceptions when backup operations fail and write to the local cache.
FAIL	Throw exceptions when backup operations fail and attempt to stop writes to the local cache.
CUSTOM	Use a custom failure policy. Requires the "failure-policy-class" attribute.

WARN

Controls how local writes to caches are handled if synchronous backup operations fail.

timeout

long

15000

Specifies timeout, in milliseconds, for synchronous and asynchronous backup operations.

enabled

boolean

true

Enables backup locations. Set the value to "false" to disable backups.

two-phase-commit

boolean

false

Enables two-phase commits for optimistic transactional caches with the synchronous backup strategy only.

failure-policy-class

string

Specifies the fully qualified name of a class that implements the CustomFailurePolicy interface. Use if failure-policy="CUSTOM".

take-offline?

Specifies the number of failures that can occur before backup locations go offline.

Name	Type	Default	Description
after-failures	int	0	Sets the number of consecutive failures that can occur for backup operations before sites go offline. Specify a negative or zero value to ignore this attribute and use minimum wait time only ("min-wait").
min-wait	long	0	Sets the minimum time to wait, in milliseconds, before sites go offline when backup operations fail. If subsequent operations are successful, the minimum wait time is reset. If you set "after-failures", sites go offline when the wait time is reached and the number of failures occur.

state-transfer?

Modifies state transfer operations.

Name	Type	Default	Description
chunk-size	int	512	Specifies how many cache entries are batched in each transfer request.
timeout	long	1200000	The time (in milliseconds) to wait for the backup site acknowledge the state chunk received and applied. Default value is 20 min.
max-retries	int	30	Sets the maximum number of retry attempts for push state failures. Specify a value of 0 (zero) to disable retry attempts. The default value is 30.
wait-time	long	2000	Sets the amount of time, in milliseconds, to wait between retry attempts for push state failures. You must specify a value of 1 or more. The default value is 2000.

backup-for?

Defines the local cache as a backup for a remote cache with a different name.

Name	Type	Default	Description
remote-cache	string		Specifies the name of the remote cache that uses the local cache as a backup.
remote-site	string		Specifies the name of the remote site that backs up data to the local cache.

encoding?

The cache encoding configuration.

Defines content type and encoding for keys and values of the cache.

key

Describes the content-type and encoding.

Name	Type	Default	Description
media-type	string

value

Describes the content-type and encoding.

Name	Type	Default	Description
media-type	string

locking?

The locking configuration of the cache.

Name

Type

Default

Description

isolation

NONE	No locking isolation will be performed. This is only valid in local mode. In clustered mode, READ_COMMITTED will be used instead.
READ_UNCOMMITTED	Unsupported. Actually configures READ_COMMITTED
READ_COMMITTED	Read committed is an isolation level that guarantees that any data read is committed at the moment it is read. However, depending on the outcome of other transactions, successive reads may return different results
REPEATABLE_READ	Repeatable read is an isolation level that guarantees that any data read is committed at the moment it is read and that, within a transaction, successive reads will always return the same data.
SERIALIZABLE	Unsupported. Actually configures REPEATABLE_READ

REPEATABLE_READ

Sets the cache locking isolation level. Infinispan only supports READ_COMMITTED or REPEATABLE_READ isolation level.

striping

boolean

false

acquire-timeout

long

10000

Maximum time to attempt a particular lock acquisition.

concurrency-level

int

Concurrency level for lock containers. Adjust this value according to the number of concurrent threads interacting with Infinispan.

transaction?

The cache transaction configuration.

Name

Type

Default

Description

mode

NONE	Cache will not enlist within transactions.
BATCH	Uses batching to group cache operations together.
NON_XA	Cache will enlist within transactions as a javax.transaction.Synchronization
NON_DURABLE_XA	Cache will enlist within transactions as a javax.transaction.xa.XAResource, without recovery.
FULL_XA	Cache will enlist within transactions as a javax.transaction.xa.XAResource, with recovery.

NONE

Sets the cache transaction mode to one of NONE, BATCH, NON_XA, NON_DURABLE_XA, FULL_XA.

stop-timeout

long

30000

locking

OPTIMISTIC	Enables Optimistic locking.
PESSIMISTIC	Enables Pessimistic locking.

OPTIMISTIC

The locking mode for this cache, one of OPTIMISTIC or PESSIMISTIC.

transaction-manager-lookup

string

org.infinispan.transaction.lookup.GenericTransactionManagerLookup

Configure Transaction manager lookup directly using an instance of TransactionManagerLookup. Calling this method marks the cache as transactional.

complete-timeout

long

60000

The duration (millis) in which to keep information about the completion of a transaction. Defaults to 60000.

reaper-interval

long

30000

The time interval (millis) at which the thread that cleans up transaction completion information kicks in. Defaults to 30000.

auto-commit

boolean

true

protocol

DEFAULT
TOTAL_ORDER

(Deprecated, Total Order will be removed) Configures the commit protocol to use.

recovery-cache

string

__recoveryInfoCacheName__

Sets the name of the cache where recovery related information is held. The cache's default name is "__recoveryInfoCacheName__"

notifications

boolean

true

Enables or disables triggering transactional notifications on cache listeners. By default is enabled.

expiration?

The cache expiration configuration.

Name	Type	Default	Description
max-idle	long	-1	Specifies the maximum amount of time, in milliseconds, that cache entries can remain idle. If no operations are performed on entries within the maximum idle time, the entries expire across the cluster. A value of 0 or -1 disables expiration.
lifespan	long	-1	Specifies the maximum amount of time, in milliseconds, that cache entries can exist. After reaching their lifespan, cache entries expire across the cluster. A value of 0 or -1 disables expiration.
interval	long	60000	Specifies the interval, in milliseconds, between expiration runs. A value of 0 or -1 disables the expiration reaper.

store-as-binary?

Configures the cache to store data in binary format.

Name	Type	Default	Description
keys	boolean		Specify whether keys are stored as binary or not. Enabled by default if the "enabled" attribute is set to true.
values	boolean		Specify whether values are stored as binary or not. Enabled by default if the "enabled" attribute is set to true.

persistence?

Configures the persistence layer for caches.

Name	Type	Default	Description
passivation	boolean	false	Enables passivation so that data is written to cache stores only if it is evicted from memory. Subsequent requests for passivated entries restore them to memory and remove them from persistent storage. If you do not enable passivation, writes to entries in memory result in writes to cache stores.
connection-attempts	int	10	Sets the maximum number of attempts to start each configured `CacheWriter` or `CacheLoader`. An exception is thrown and the cache does not start if the number of connection attempts exceeds the maximum.
connection-interval	int	50	Specifies the time, in milliseconds, to wait between connection attempts on startup. A negative or zero value means no wait between connection attempts.
availability-interval	int	1000	Specifies the time, in milliseconds, between availability checks to determine if the PersistenceManager is available. In other words, this interval sets how often stores and loaders are polled via their `org.infinispan.persistence.spi.CacheWriter#isAvailable` or `org.infinispan.persistence.spi.CacheLoader#isAvailable` implementation. If a single store or loader is not available, an exception is thrown during cache operations.

cluster-loader

Defines a cluster cache loader.

Name	Type	Default	Description
remote-timeout	long	15000	The timeout when performing remote calls.

Name	Type	Default	Description
name	string		Unused XML attribute.
shared	boolean	false	Determines if a cache loader is shared between cache instances. Values are true / false (default). This property prevents duplicate writes of data to the cache loader by different cache instances. An example is where all cache instances in a cluster use the same JDBC settings for the same remote, shared database. If true, only the nodes where modifications originate write to the cache store. If false, each cache reacts to potential remote updates by storing the data to the cache store.
preload	boolean	false	Pre-loads data into memory from the cache loader when the cache starts. Values are true / false (default). This property is useful when data in the cache loader is required immediately after startup to prevent delays with cache operations when the data is loaded lazily. This property can provide a "warm cache" on startup but it impacts performance because it affects start time. Pre-loading data is done locally, so any data loaded is stored locally in the node only. Pre-loaded data is not replicated or distributed. Likewise, data is pre-loaded only up to the maximum configured number of entries in eviction.

property*

A cache loader property with name and value.

store

Defines a custom cache store.

Name	Type	Default	Description
class	string		Defines the class name of a cache store that implements either `CacheLoader`, `CacheWriter`, or both.

Name	Type	Default	Description
shared	boolean	false	This setting should be set to true when multiple cache instances share the same cache store (e.g., multiple nodes in a cluster using a JDBC-based CacheStore pointing to the same, shared database.) Setting this to true avoids multiple cache instances writing the same modification multiple times. If enabled, only the node where the modification originated will write to the cache store. If disabled, each individual cache reacts to a potential remote update by storing the data to the cache store.
transactional	boolean	false	This setting should be set to true when the underlying cache store supports transactions and it is desirable for the underlying store and the cache to remain synchronized. With this enabled any Exceptions thrown whilst writing to the underlying store will result in both the store's and cache's transactions rollingback.
preload	boolean	false	If true, when the cache starts, data stored in the cache store will be pre-loaded into memory. This is particularly useful when data in the cache store will be needed immediately after startup and you want to avoid cache operations being delayed as a result of loading this data lazily. Can be used to provide a 'warm-cache' on startup, however there is a performance penalty as startup time is affected by this process.
fetch-state	boolean	false	Fetches the persistent state of a cache when joining a cluster. Values are true / false (default). The purpose of this property is to retrieve the persistent state of a cache and apply it to the local cache store of a node when it joins a cluster. Fetching the persistent state does not apply if a cache store is shared because it accesses the same data as the other stores. This property can be `true` for one configured cache loader only. If more than one cache loader fetches the persistent state, a configuration exception is thrown when the cache service starts.
purge	boolean	false	Empties the specified cache loader at startup. Values are true / false (default). This property takes effect only if read-only is false.
read-only	boolean	false	Prevents data from being persisted to cache stores. Values are true / false (default). If true, cache stores load entries only. Any modifications to data in the cache do not apply to cache stores.
max-batch-size	int	100	Sets the maximum size of a batch to insert or delete from the cache store. If the value is less than one, no upper limit applies to the number of operations in a batch.
segmented	boolean	true	Configures cache stores to store data in hash space segments, with the "hash.numSegments" property defining the number of segments.

write-behind?

Configures cache stores as write-behind instead of write-through.

Name	Type	Default	Description
modification-queue-size	int	1024	Specifies the maximum number of entries in the asynchronous modification queue. When the queue is full, write-through mode is used until the queue can accept new entries.
thread-pool-size	int	1	Specifies the number of threads to apply modifications to the cache store.
fail-silently	boolean	false	Controls how asynchronous write operations take place when cache stores become unavailable. If "true", asynchronous write operations that fail are re-attempted with the number of times specified in the "connection-attempts" parameter. If all attempts fail, errors are ignored and write operations are not executed on the cache store. If "false", asynchronous write operations that fail are re-attempted when the underlying store becomes available. If the modification queue becomes full before the underlying store becomes available, an error is thrown on all future write operations to the store until the modification queue is flushed. The modification queue is not persisted. If the underlying store does not become available before the asynchronous store is stopped, queued modifications are lost.

property*

Defines a cache store property with name and value.

file-store

Defines a filesystem-based cache store.

Name	Type	Description
max-entries	int	Specifies the maximum number of entries that the file store can hold. To increase the speed of lookups, Single File cache stores index keys and their locations in the file. To avoid excessive memory usage, you can configure the maximum number of entries so that entries are removed permanently from both memory and the cache store when the maximum is exceeded. However, this can lead to data loss. You should only set a maximum number of entries if data can be recomputed or retrieved from an authoritative data store. By default, the value is `-1` which means that there is no maximum number of entries.
relative-to	string	Defines the root path on the file system where data is stored.
path	string	Specifies a filesystem directory for data. The value can be a relative or absolute path. Relative paths are created relative to the configured global persistent location. Absolute paths must be subdirectories of the global persistent location, otherwise an exception is thrown.

Name	Type	Default	Description
shared	boolean	false	This setting should be set to true when multiple cache instances share the same cache store (e.g., multiple nodes in a cluster using a JDBC-based CacheStore pointing to the same, shared database.) Setting this to true avoids multiple cache instances writing the same modification multiple times. If enabled, only the node where the modification originated will write to the cache store. If disabled, each individual cache reacts to a potential remote update by storing the data to the cache store.
transactional	boolean	false	This setting should be set to true when the underlying cache store supports transactions and it is desirable for the underlying store and the cache to remain synchronized. With this enabled any Exceptions thrown whilst writing to the underlying store will result in both the store's and cache's transactions rollingback.
preload	boolean	false	If true, when the cache starts, data stored in the cache store will be pre-loaded into memory. This is particularly useful when data in the cache store will be needed immediately after startup and you want to avoid cache operations being delayed as a result of loading this data lazily. Can be used to provide a 'warm-cache' on startup, however there is a performance penalty as startup time is affected by this process.
fetch-state	boolean	false	Fetches the persistent state of a cache when joining a cluster. Values are true / false (default). The purpose of this property is to retrieve the persistent state of a cache and apply it to the local cache store of a node when it joins a cluster. Fetching the persistent state does not apply if a cache store is shared because it accesses the same data as the other stores. This property can be `true` for one configured cache loader only. If more than one cache loader fetches the persistent state, a configuration exception is thrown when the cache service starts.
purge	boolean	false	Empties the specified cache loader at startup. Values are true / false (default). This property takes effect only if read-only is false.
read-only	boolean	false	Prevents data from being persisted to cache stores. Values are true / false (default). If true, cache stores load entries only. Any modifications to data in the cache do not apply to cache stores.
max-batch-size	int	100	Sets the maximum size of a batch to insert or delete from the cache store. If the value is less than one, no upper limit applies to the number of operations in a batch.
segmented	boolean	true	Configures cache stores to store data in hash space segments, with the "hash.numSegments" property defining the number of segments.

write-behind?

Configures cache stores as write-behind instead of write-through.

Name	Type	Default	Description
modification-queue-size	int	1024	Specifies the maximum number of entries in the asynchronous modification queue. When the queue is full, write-through mode is used until the queue can accept new entries.
thread-pool-size	int	1	Specifies the number of threads to apply modifications to the cache store.
fail-silently	boolean	false	Controls how asynchronous write operations take place when cache stores become unavailable. If "true", asynchronous write operations that fail are re-attempted with the number of times specified in the "connection-attempts" parameter. If all attempts fail, errors are ignored and write operations are not executed on the cache store. If "false", asynchronous write operations that fail are re-attempted when the underlying store becomes available. If the modification queue becomes full before the underlying store becomes available, an error is thrown on all future write operations to the store until the modification queue is flushed. The modification queue is not persisted. If the underlying store does not become available before the asynchronous store is stopped, queued modifications are lost.

property*

Defines a cache store property with name and value.

memory?

Controls how the entries are stored in memory

object

Store keys and values as instance variables in the Java heap. Instances of byte[] are wrapped to ensure equality. This is the default storage format.

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs when the number of entries exceeds the size.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

binary

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs either when the number of entries or amount of memory exceeds the size.

eviction

COUNT	Evict entries from the cache when the number of entries reaches the configured size.
MEMORY	Evict entries from the cache when the amount of memory in use reaches the configured size.

Specifies whether eviction is based on the number of entries or the amount of memory used.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

off-heap

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs either when the number of entries or amount of memory exceeds the size.

eviction

COUNT	Evict entries from the cache when the number of entries reaches the configured size.
MEMORY	Evict entries from the cache when the amount of memory in use reaches the configured size.

Specifies whether eviction is based on the number of entries or the amount of memory used.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

indexing?

Defines indexing options for cache

Name

Type

Default

Description

index

NONE	Do not index data. This is the default.
LOCAL	Only index changes made locally, ignoring remote changes. This is useful if indexes are shared across a cluster to prevent redundant indexing of updates.
ALL	Index all data
PRIMARY_OWNER	Only index changes on the primary owner, regardless of it's local or remote.

NONE

The indexing mode of the cache. Defaults to NONE.

auto-config

boolean

false

Whether or not to apply automatic index configuration based on cache type

key-transformers?

Defines the Transformers used to stringify keys for indexing with Lucene

key-transformer*

Defines the Transformer to use for the specified key class

Name	Type	Default	Description
key	string
transformer	string

indexed-entities?

Defines the indexed entity classes

indexed-entity*

Indexed entity class name

property*

Property to pass on to the indexing system

custom-interceptors?

Deprecated since 10.0, will be removed without a replacement. Configures custom interceptors to be added to the cache.

interceptor*

Deprecated since 10.0, will be removed without a replacement.

Name	Type	Description
after	string	Dictates that the custom interceptor appears immediately after the specified interceptor. If the specified interceptor is not found in the interceptor chain, a ConfigurationException will be thrown when the cache starts.
before	string	Dictates that the custom interceptor appears immediately before the specified interceptor. If the specified interceptor is not found in the interceptor chain, a ConfigurationException will be thrown when the cache starts.
class	string	A fully qualified class name of the new custom interceptor to add to the configuration.
index	int	Specifies a position in the interceptor chain to place the new interceptor. The index starts at 0 and goes up to the number of interceptors in a given configuration. A ConfigurationException is thrown if the index is less than 0 or greater than the maximum number of interceptors in the chain.
position	string	Specifies a position where to place the new interceptor. Allowed values are FIRST, LAST, and OTHER_THAN_FIRST_OR_LAST

property?

security?

Configures cache-level security.

authorization?

Configures authorization for this cache.

Name	Type	Default	Description
enabled	boolean	false	Enables authorization checks for this cache. Defaults to true if the authorization element is present.
roles			Sets the valid roles required to access this cache.

distributed-cache

Defines a DIST_* mode cache.

Name	Type	Default	Description
owners	int	2	Number of cluster-wide replicas for each cache entry.
segments	int	256	Sets the number of hash space segments per cluster. The default value is 256. The value should be at least 20 * the cluster size.
capacity-factor	double	1.0	Controls the proportion of entries that will reside on the local node, compared to the other nodes in the cluster. Value must be positive. The default is 1
l1-lifespan	long		Maximum lifespan in milliseconds of an entry placed in the L1 cache. By default L1 is disabled unless a positive value is configured for this attribute. If the attribute is not present, L1 is disabled.
l1-cleanup-interval	long	60000	Controls how often a cleanup task to prune L1 tracking data is run. Defaults to 10 minutes.
capacity	float	1.0	Controls the proportion of entries that will reside on the local node, compared to the other nodes in the cluster. This is just a suggestion, there is no guarantee that a node with a capacity factor of 2 will have twice as many entries as a node with a capacity factor of 1.
consistent-hash-factory	string		The factory to use for generating the consistent hash. Must implement `org.infinispan.distribution.ch.ConsistentHashFactory`. E.g. `org.infinispan.distribution.ch.impl.SyncConsistentHashFactory` can be used to guarantee that multiple distributed caches use exactly the same consistent hash, which for performance reasons is not guaranteed by the default consistent hash factory instance used.
key-partitioner	string		The name of the key partitioner class. Must implement `org.infinispan.distribution.ch.KeyPartitioner`. A custom key partitioner can be used as an alternative to grouping, to guarantee that some keys are located in the same segment (and thus their primary owner is the same node). Since 8.2.

state-transfer?

The state transfer configuration for distribution and replicated caches.

Name	Type	Default	Description
enabled	boolean	true	If enabled, this will cause the cache to ask neighboring caches for state when it starts up, so the cache starts 'warm', although it will impact startup time.
timeout	long	240000	The maximum amount of time (ms) to wait for state from neighboring caches, before throwing an exception and aborting startup.
chunk-size	integer	512	The number of cache entries to batch in each transfer.
await-initial-transfer	boolean	true	If enabled, this will cause the cache to wait for initial state transfer to complete before responding to requests.

groups?

Configures grouping of data.

Name	Type	Default	Description
enabled	boolean		Enables or disables grouping.

grouper*

Name	Type	Default	Description
class	string		The class to use to group keys. Must implement org.infinispan.distribution.group.Grouper.

Name

Type

Default

Description

mode

ASYNC	Enables asynchronous mode.
SYNC	Enables synchronous mode.

SYNC

Sets the clustered cache mode, ASYNC for asynchronous operation, or SYNC for synchronous operation.

remote-timeout

long

15000

In SYNC mode, the timeout (in ms) used to wait for an acknowledgment when making a remote call, after which the call is aborted and an exception is thrown.

partition-handling?

Configures the way this cache reacts to node crashes and split brains.

Name

Type

Default

Description

enabled

boolean

Deprecated, use type instead. Enable/disable the partition handling functionality. Defaults to false.

when-split

DENY_READ_WRITES	If the partition does not have all owners for a given segment, both reads and writes are denied for all keys in that segment.
ALLOW_READS	Allows reads for a given key if it exists in this partition, but only allows writes if this partition contains all owners of a segment.
ALLOW_READ_WRITES	Allow entries on each partition to diverge, with conflicts resolved during merge.

ALLOW_READ_WRITES

The type of actions that are possible when a split brain scenario is encountered.

merge-policy

NONE

The entry merge policy which should be applied on partition merges.

Name	Type	Default	Description
name	ID		Uniquely identifies this cache within its cache container.
configuration	IDREF		The name of the cache configuration which this configuration inherits from.
start	FIXME		Unused XML attribute
jndi-name	string		Unused XML attribute
module	string		Unused XML attribute
statistics	boolean	false	Determines whether or not the cache should collect statistics. Keep disabled for optimal performance.
statistics-available	boolean	true	If set to false, statistics gathering cannot be enabled during runtime. Keep disabled for optimal performance.
unreliable-return-values	boolean	false	Specifies whether Infinispan is allowed to disregard the Map contract when providing return values for org.infinispan.Cache#put(Object, Object) and org.infinispan.Cache#remove(Object) methods.

backups?

Defines backup locations for cache data and modifies state transfer properties.

backup*

Configures a remote site as a backup location for cache data.

Name

Type

Default

Description

site

string

Names the remote site to which the cache backs up data.

strategy

ASYNC	Enables asynchronous mode.
SYNC	Enables synchronous mode.

ASYNC

Sets the strategy for backing up to a remote site.

failure-policy

IGNORE	Ignore failed backup operations and write to the local cache.
WARN	Log exceptions when backup operations fail and write to the local cache.
FAIL	Throw exceptions when backup operations fail and attempt to stop writes to the local cache.
CUSTOM	Use a custom failure policy. Requires the "failure-policy-class" attribute.

WARN

Controls how local writes to caches are handled if synchronous backup operations fail.

timeout

long

15000

Specifies timeout, in milliseconds, for synchronous and asynchronous backup operations.

enabled

boolean

true

Enables backup locations. Set the value to "false" to disable backups.

two-phase-commit

boolean

false

Enables two-phase commits for optimistic transactional caches with the synchronous backup strategy only.

failure-policy-class

string

Specifies the fully qualified name of a class that implements the CustomFailurePolicy interface. Use if failure-policy="CUSTOM".

take-offline?

Specifies the number of failures that can occur before backup locations go offline.

Name	Type	Default	Description
after-failures	int	0	Sets the number of consecutive failures that can occur for backup operations before sites go offline. Specify a negative or zero value to ignore this attribute and use minimum wait time only ("min-wait").
min-wait	long	0	Sets the minimum time to wait, in milliseconds, before sites go offline when backup operations fail. If subsequent operations are successful, the minimum wait time is reset. If you set "after-failures", sites go offline when the wait time is reached and the number of failures occur.

state-transfer?

Modifies state transfer operations.

Name	Type	Default	Description
chunk-size	int	512	Specifies how many cache entries are batched in each transfer request.
timeout	long	1200000	The time (in milliseconds) to wait for the backup site acknowledge the state chunk received and applied. Default value is 20 min.
max-retries	int	30	Sets the maximum number of retry attempts for push state failures. Specify a value of 0 (zero) to disable retry attempts. The default value is 30.
wait-time	long	2000	Sets the amount of time, in milliseconds, to wait between retry attempts for push state failures. You must specify a value of 1 or more. The default value is 2000.

backup-for?

Defines the local cache as a backup for a remote cache with a different name.

Name	Type	Default	Description
remote-cache	string		Specifies the name of the remote cache that uses the local cache as a backup.
remote-site	string		Specifies the name of the remote site that backs up data to the local cache.

encoding?

The cache encoding configuration.

Defines content type and encoding for keys and values of the cache.

key

Describes the content-type and encoding.

Name	Type	Default	Description
media-type	string

value

Describes the content-type and encoding.

Name	Type	Default	Description
media-type	string

locking?

The locking configuration of the cache.

Name

Type

Default

Description

isolation

NONE	No locking isolation will be performed. This is only valid in local mode. In clustered mode, READ_COMMITTED will be used instead.
READ_UNCOMMITTED	Unsupported. Actually configures READ_COMMITTED
READ_COMMITTED	Read committed is an isolation level that guarantees that any data read is committed at the moment it is read. However, depending on the outcome of other transactions, successive reads may return different results
REPEATABLE_READ	Repeatable read is an isolation level that guarantees that any data read is committed at the moment it is read and that, within a transaction, successive reads will always return the same data.
SERIALIZABLE	Unsupported. Actually configures REPEATABLE_READ

REPEATABLE_READ

Sets the cache locking isolation level. Infinispan only supports READ_COMMITTED or REPEATABLE_READ isolation level.

striping

boolean

false

acquire-timeout

long

10000

Maximum time to attempt a particular lock acquisition.

concurrency-level

int

Concurrency level for lock containers. Adjust this value according to the number of concurrent threads interacting with Infinispan.

transaction?

The cache transaction configuration.

Name

Type

Default

Description

mode

NONE	Cache will not enlist within transactions.
BATCH	Uses batching to group cache operations together.
NON_XA	Cache will enlist within transactions as a javax.transaction.Synchronization
NON_DURABLE_XA	Cache will enlist within transactions as a javax.transaction.xa.XAResource, without recovery.
FULL_XA	Cache will enlist within transactions as a javax.transaction.xa.XAResource, with recovery.

NONE

Sets the cache transaction mode to one of NONE, BATCH, NON_XA, NON_DURABLE_XA, FULL_XA.

stop-timeout

long

30000

locking

OPTIMISTIC	Enables Optimistic locking.
PESSIMISTIC	Enables Pessimistic locking.

OPTIMISTIC

The locking mode for this cache, one of OPTIMISTIC or PESSIMISTIC.

transaction-manager-lookup

string

org.infinispan.transaction.lookup.GenericTransactionManagerLookup

Configure Transaction manager lookup directly using an instance of TransactionManagerLookup. Calling this method marks the cache as transactional.

complete-timeout

long

60000

The duration (millis) in which to keep information about the completion of a transaction. Defaults to 60000.

reaper-interval

long

30000

The time interval (millis) at which the thread that cleans up transaction completion information kicks in. Defaults to 30000.

auto-commit

boolean

true

protocol

DEFAULT
TOTAL_ORDER

(Deprecated, Total Order will be removed) Configures the commit protocol to use.

recovery-cache

string

__recoveryInfoCacheName__

Sets the name of the cache where recovery related information is held. The cache's default name is "__recoveryInfoCacheName__"

notifications

boolean

true

Enables or disables triggering transactional notifications on cache listeners. By default is enabled.

expiration?

The cache expiration configuration.

Name	Type	Default	Description
max-idle	long	-1	Specifies the maximum amount of time, in milliseconds, that cache entries can remain idle. If no operations are performed on entries within the maximum idle time, the entries expire across the cluster. A value of 0 or -1 disables expiration.
lifespan	long	-1	Specifies the maximum amount of time, in milliseconds, that cache entries can exist. After reaching their lifespan, cache entries expire across the cluster. A value of 0 or -1 disables expiration.
interval	long	60000	Specifies the interval, in milliseconds, between expiration runs. A value of 0 or -1 disables the expiration reaper.

store-as-binary?

Configures the cache to store data in binary format.

Name	Type	Default	Description
keys	boolean		Specify whether keys are stored as binary or not. Enabled by default if the "enabled" attribute is set to true.
values	boolean		Specify whether values are stored as binary or not. Enabled by default if the "enabled" attribute is set to true.

persistence?

Configures the persistence layer for caches.

Name	Type	Default	Description
passivation	boolean	false	Enables passivation so that data is written to cache stores only if it is evicted from memory. Subsequent requests for passivated entries restore them to memory and remove them from persistent storage. If you do not enable passivation, writes to entries in memory result in writes to cache stores.
connection-attempts	int	10	Sets the maximum number of attempts to start each configured `CacheWriter` or `CacheLoader`. An exception is thrown and the cache does not start if the number of connection attempts exceeds the maximum.
connection-interval	int	50	Specifies the time, in milliseconds, to wait between connection attempts on startup. A negative or zero value means no wait between connection attempts.
availability-interval	int	1000	Specifies the time, in milliseconds, between availability checks to determine if the PersistenceManager is available. In other words, this interval sets how often stores and loaders are polled via their `org.infinispan.persistence.spi.CacheWriter#isAvailable` or `org.infinispan.persistence.spi.CacheLoader#isAvailable` implementation. If a single store or loader is not available, an exception is thrown during cache operations.

cluster-loader

Defines a cluster cache loader.

Name	Type	Default	Description
remote-timeout	long	15000	The timeout when performing remote calls.

Name	Type	Default	Description
name	string		Unused XML attribute.
shared	boolean	false	Determines if a cache loader is shared between cache instances. Values are true / false (default). This property prevents duplicate writes of data to the cache loader by different cache instances. An example is where all cache instances in a cluster use the same JDBC settings for the same remote, shared database. If true, only the nodes where modifications originate write to the cache store. If false, each cache reacts to potential remote updates by storing the data to the cache store.
preload	boolean	false	Pre-loads data into memory from the cache loader when the cache starts. Values are true / false (default). This property is useful when data in the cache loader is required immediately after startup to prevent delays with cache operations when the data is loaded lazily. This property can provide a "warm cache" on startup but it impacts performance because it affects start time. Pre-loading data is done locally, so any data loaded is stored locally in the node only. Pre-loaded data is not replicated or distributed. Likewise, data is pre-loaded only up to the maximum configured number of entries in eviction.

property*

A cache loader property with name and value.

store

Defines a custom cache store.

Name	Type	Default	Description
class	string		Defines the class name of a cache store that implements either `CacheLoader`, `CacheWriter`, or both.

Name	Type	Default	Description
shared	boolean	false	This setting should be set to true when multiple cache instances share the same cache store (e.g., multiple nodes in a cluster using a JDBC-based CacheStore pointing to the same, shared database.) Setting this to true avoids multiple cache instances writing the same modification multiple times. If enabled, only the node where the modification originated will write to the cache store. If disabled, each individual cache reacts to a potential remote update by storing the data to the cache store.
transactional	boolean	false	This setting should be set to true when the underlying cache store supports transactions and it is desirable for the underlying store and the cache to remain synchronized. With this enabled any Exceptions thrown whilst writing to the underlying store will result in both the store's and cache's transactions rollingback.
preload	boolean	false	If true, when the cache starts, data stored in the cache store will be pre-loaded into memory. This is particularly useful when data in the cache store will be needed immediately after startup and you want to avoid cache operations being delayed as a result of loading this data lazily. Can be used to provide a 'warm-cache' on startup, however there is a performance penalty as startup time is affected by this process.
fetch-state	boolean	false	Fetches the persistent state of a cache when joining a cluster. Values are true / false (default). The purpose of this property is to retrieve the persistent state of a cache and apply it to the local cache store of a node when it joins a cluster. Fetching the persistent state does not apply if a cache store is shared because it accesses the same data as the other stores. This property can be `true` for one configured cache loader only. If more than one cache loader fetches the persistent state, a configuration exception is thrown when the cache service starts.
purge	boolean	false	Empties the specified cache loader at startup. Values are true / false (default). This property takes effect only if read-only is false.
read-only	boolean	false	Prevents data from being persisted to cache stores. Values are true / false (default). If true, cache stores load entries only. Any modifications to data in the cache do not apply to cache stores.
max-batch-size	int	100	Sets the maximum size of a batch to insert or delete from the cache store. If the value is less than one, no upper limit applies to the number of operations in a batch.
segmented	boolean	true	Configures cache stores to store data in hash space segments, with the "hash.numSegments" property defining the number of segments.

write-behind?

Configures cache stores as write-behind instead of write-through.

Name	Type	Default	Description
modification-queue-size	int	1024	Specifies the maximum number of entries in the asynchronous modification queue. When the queue is full, write-through mode is used until the queue can accept new entries.
thread-pool-size	int	1	Specifies the number of threads to apply modifications to the cache store.
fail-silently	boolean	false	Controls how asynchronous write operations take place when cache stores become unavailable. If "true", asynchronous write operations that fail are re-attempted with the number of times specified in the "connection-attempts" parameter. If all attempts fail, errors are ignored and write operations are not executed on the cache store. If "false", asynchronous write operations that fail are re-attempted when the underlying store becomes available. If the modification queue becomes full before the underlying store becomes available, an error is thrown on all future write operations to the store until the modification queue is flushed. The modification queue is not persisted. If the underlying store does not become available before the asynchronous store is stopped, queued modifications are lost.

property*

Defines a cache store property with name and value.

file-store

Defines a filesystem-based cache store.

Name	Type	Description
max-entries	int	Specifies the maximum number of entries that the file store can hold. To increase the speed of lookups, Single File cache stores index keys and their locations in the file. To avoid excessive memory usage, you can configure the maximum number of entries so that entries are removed permanently from both memory and the cache store when the maximum is exceeded. However, this can lead to data loss. You should only set a maximum number of entries if data can be recomputed or retrieved from an authoritative data store. By default, the value is `-1` which means that there is no maximum number of entries.
relative-to	string	Defines the root path on the file system where data is stored.
path	string	Specifies a filesystem directory for data. The value can be a relative or absolute path. Relative paths are created relative to the configured global persistent location. Absolute paths must be subdirectories of the global persistent location, otherwise an exception is thrown.

Name	Type	Default	Description
shared	boolean	false	This setting should be set to true when multiple cache instances share the same cache store (e.g., multiple nodes in a cluster using a JDBC-based CacheStore pointing to the same, shared database.) Setting this to true avoids multiple cache instances writing the same modification multiple times. If enabled, only the node where the modification originated will write to the cache store. If disabled, each individual cache reacts to a potential remote update by storing the data to the cache store.
transactional	boolean	false	This setting should be set to true when the underlying cache store supports transactions and it is desirable for the underlying store and the cache to remain synchronized. With this enabled any Exceptions thrown whilst writing to the underlying store will result in both the store's and cache's transactions rollingback.
preload	boolean	false	If true, when the cache starts, data stored in the cache store will be pre-loaded into memory. This is particularly useful when data in the cache store will be needed immediately after startup and you want to avoid cache operations being delayed as a result of loading this data lazily. Can be used to provide a 'warm-cache' on startup, however there is a performance penalty as startup time is affected by this process.
fetch-state	boolean	false	Fetches the persistent state of a cache when joining a cluster. Values are true / false (default). The purpose of this property is to retrieve the persistent state of a cache and apply it to the local cache store of a node when it joins a cluster. Fetching the persistent state does not apply if a cache store is shared because it accesses the same data as the other stores. This property can be `true` for one configured cache loader only. If more than one cache loader fetches the persistent state, a configuration exception is thrown when the cache service starts.
purge	boolean	false	Empties the specified cache loader at startup. Values are true / false (default). This property takes effect only if read-only is false.
read-only	boolean	false	Prevents data from being persisted to cache stores. Values are true / false (default). If true, cache stores load entries only. Any modifications to data in the cache do not apply to cache stores.
max-batch-size	int	100	Sets the maximum size of a batch to insert or delete from the cache store. If the value is less than one, no upper limit applies to the number of operations in a batch.
segmented	boolean	true	Configures cache stores to store data in hash space segments, with the "hash.numSegments" property defining the number of segments.

write-behind?

Configures cache stores as write-behind instead of write-through.

Name	Type	Default	Description
modification-queue-size	int	1024	Specifies the maximum number of entries in the asynchronous modification queue. When the queue is full, write-through mode is used until the queue can accept new entries.
thread-pool-size	int	1	Specifies the number of threads to apply modifications to the cache store.
fail-silently	boolean	false	Controls how asynchronous write operations take place when cache stores become unavailable. If "true", asynchronous write operations that fail are re-attempted with the number of times specified in the "connection-attempts" parameter. If all attempts fail, errors are ignored and write operations are not executed on the cache store. If "false", asynchronous write operations that fail are re-attempted when the underlying store becomes available. If the modification queue becomes full before the underlying store becomes available, an error is thrown on all future write operations to the store until the modification queue is flushed. The modification queue is not persisted. If the underlying store does not become available before the asynchronous store is stopped, queued modifications are lost.

property*

Defines a cache store property with name and value.

memory?

Controls how the entries are stored in memory

object

Store keys and values as instance variables in the Java heap. Instances of byte[] are wrapped to ensure equality. This is the default storage format.

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs when the number of entries exceeds the size.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

binary

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs either when the number of entries or amount of memory exceeds the size.

eviction

COUNT	Evict entries from the cache when the number of entries reaches the configured size.
MEMORY	Evict entries from the cache when the amount of memory in use reaches the configured size.

Specifies whether eviction is based on the number of entries or the amount of memory used.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

off-heap

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs either when the number of entries or amount of memory exceeds the size.

eviction

COUNT	Evict entries from the cache when the number of entries reaches the configured size.
MEMORY	Evict entries from the cache when the amount of memory in use reaches the configured size.

Specifies whether eviction is based on the number of entries or the amount of memory used.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

indexing?

Defines indexing options for cache

Name

Type

Default

Description

index

NONE	Do not index data. This is the default.
LOCAL	Only index changes made locally, ignoring remote changes. This is useful if indexes are shared across a cluster to prevent redundant indexing of updates.
ALL	Index all data
PRIMARY_OWNER	Only index changes on the primary owner, regardless of it's local or remote.

NONE

The indexing mode of the cache. Defaults to NONE.

auto-config

boolean

false

Whether or not to apply automatic index configuration based on cache type

key-transformers?

Defines the Transformers used to stringify keys for indexing with Lucene

key-transformer*

Defines the Transformer to use for the specified key class

Name	Type	Default	Description
key	string
transformer	string

indexed-entities?

Defines the indexed entity classes

indexed-entity*

Indexed entity class name

property*

Property to pass on to the indexing system

custom-interceptors?

Deprecated since 10.0, will be removed without a replacement. Configures custom interceptors to be added to the cache.

interceptor*

Deprecated since 10.0, will be removed without a replacement.

Name	Type	Description
after	string	Dictates that the custom interceptor appears immediately after the specified interceptor. If the specified interceptor is not found in the interceptor chain, a ConfigurationException will be thrown when the cache starts.
before	string	Dictates that the custom interceptor appears immediately before the specified interceptor. If the specified interceptor is not found in the interceptor chain, a ConfigurationException will be thrown when the cache starts.
class	string	A fully qualified class name of the new custom interceptor to add to the configuration.
index	int	Specifies a position in the interceptor chain to place the new interceptor. The index starts at 0 and goes up to the number of interceptors in a given configuration. A ConfigurationException is thrown if the index is less than 0 or greater than the maximum number of interceptors in the chain.
position	string	Specifies a position where to place the new interceptor. Allowed values are FIRST, LAST, and OTHER_THAN_FIRST_OR_LAST

property?

security?

Configures cache-level security.

authorization?

Configures authorization for this cache.

Name	Type	Default	Description
enabled	boolean	false	Enables authorization checks for this cache. Defaults to true if the authorization element is present.
roles			Sets the valid roles required to access this cache.

distributed-cache-configuration

Defines a DIST_* mode cache configuration.

Name	Type	Default	Description
owners	int	2	Number of cluster-wide replicas for each cache entry.
segments	int	256	Sets the number of hash space segments per cluster. The default value is 256. The value should be at least 20 * the cluster size.
capacity-factor	double	1.0	Controls the proportion of entries that will reside on the local node, compared to the other nodes in the cluster. Value must be positive. The default is 1
l1-lifespan	long		Maximum lifespan in milliseconds of an entry placed in the L1 cache. By default L1 is disabled unless a positive value is configured for this attribute. If the attribute is not present, L1 is disabled.
l1-cleanup-interval	long	60000	Controls how often a cleanup task to prune L1 tracking data is run. Defaults to 10 minutes.
capacity	float	1.0	Controls the proportion of entries that will reside on the local node, compared to the other nodes in the cluster. This is just a suggestion, there is no guarantee that a node with a capacity factor of 2 will have twice as many entries as a node with a capacity factor of 1.
consistent-hash-factory	string		The factory to use for generating the consistent hash. Must implement `org.infinispan.distribution.ch.ConsistentHashFactory`. E.g. `org.infinispan.distribution.ch.impl.SyncConsistentHashFactory` can be used to guarantee that multiple distributed caches use exactly the same consistent hash, which for performance reasons is not guaranteed by the default consistent hash factory instance used.
key-partitioner	string		The name of the key partitioner class. Must implement `org.infinispan.distribution.ch.KeyPartitioner`. A custom key partitioner can be used as an alternative to grouping, to guarantee that some keys are located in the same segment (and thus their primary owner is the same node). Since 8.2.

state-transfer?

The state transfer configuration for distribution and replicated caches.

Name	Type	Default	Description
enabled	boolean	true	If enabled, this will cause the cache to ask neighboring caches for state when it starts up, so the cache starts 'warm', although it will impact startup time.
timeout	long	240000	The maximum amount of time (ms) to wait for state from neighboring caches, before throwing an exception and aborting startup.
chunk-size	integer	512	The number of cache entries to batch in each transfer.
await-initial-transfer	boolean	true	If enabled, this will cause the cache to wait for initial state transfer to complete before responding to requests.

groups?

Configures grouping of data.

Name	Type	Default	Description
enabled	boolean		Enables or disables grouping.

grouper*

Name	Type	Default	Description
class	string		The class to use to group keys. Must implement org.infinispan.distribution.group.Grouper.

Name

Type

Default

Description

mode

ASYNC	Enables asynchronous mode.
SYNC	Enables synchronous mode.

SYNC

Sets the clustered cache mode, ASYNC for asynchronous operation, or SYNC for synchronous operation.

remote-timeout

long

15000

In SYNC mode, the timeout (in ms) used to wait for an acknowledgment when making a remote call, after which the call is aborted and an exception is thrown.

partition-handling?

Configures the way this cache reacts to node crashes and split brains.

Name

Type

Default

Description

enabled

boolean

Deprecated, use type instead. Enable/disable the partition handling functionality. Defaults to false.

when-split

DENY_READ_WRITES	If the partition does not have all owners for a given segment, both reads and writes are denied for all keys in that segment.
ALLOW_READS	Allows reads for a given key if it exists in this partition, but only allows writes if this partition contains all owners of a segment.
ALLOW_READ_WRITES	Allow entries on each partition to diverge, with conflicts resolved during merge.

ALLOW_READ_WRITES

The type of actions that are possible when a split brain scenario is encountered.

merge-policy

NONE

The entry merge policy which should be applied on partition merges.

Name	Type	Default	Description
name	ID		Uniquely identifies this cache within its cache container.
configuration	IDREF		The name of the cache configuration which this configuration inherits from.
start	FIXME		Unused XML attribute
jndi-name	string		Unused XML attribute
module	string		Unused XML attribute
statistics	boolean	false	Determines whether or not the cache should collect statistics. Keep disabled for optimal performance.
statistics-available	boolean	true	If set to false, statistics gathering cannot be enabled during runtime. Keep disabled for optimal performance.
unreliable-return-values	boolean	false	Specifies whether Infinispan is allowed to disregard the Map contract when providing return values for org.infinispan.Cache#put(Object, Object) and org.infinispan.Cache#remove(Object) methods.

backups?

Defines backup locations for cache data and modifies state transfer properties.

backup*

Configures a remote site as a backup location for cache data.

Name

Type

Default

Description

site

string

Names the remote site to which the cache backs up data.

strategy

ASYNC	Enables asynchronous mode.
SYNC	Enables synchronous mode.

ASYNC

Sets the strategy for backing up to a remote site.

failure-policy

IGNORE	Ignore failed backup operations and write to the local cache.
WARN	Log exceptions when backup operations fail and write to the local cache.
FAIL	Throw exceptions when backup operations fail and attempt to stop writes to the local cache.
CUSTOM	Use a custom failure policy. Requires the "failure-policy-class" attribute.

WARN

Controls how local writes to caches are handled if synchronous backup operations fail.

timeout

long

15000

Specifies timeout, in milliseconds, for synchronous and asynchronous backup operations.

enabled

boolean

true

Enables backup locations. Set the value to "false" to disable backups.

two-phase-commit

boolean

false

Enables two-phase commits for optimistic transactional caches with the synchronous backup strategy only.

failure-policy-class

string

Specifies the fully qualified name of a class that implements the CustomFailurePolicy interface. Use if failure-policy="CUSTOM".

take-offline?

Specifies the number of failures that can occur before backup locations go offline.

Name	Type	Default	Description
after-failures	int	0	Sets the number of consecutive failures that can occur for backup operations before sites go offline. Specify a negative or zero value to ignore this attribute and use minimum wait time only ("min-wait").
min-wait	long	0	Sets the minimum time to wait, in milliseconds, before sites go offline when backup operations fail. If subsequent operations are successful, the minimum wait time is reset. If you set "after-failures", sites go offline when the wait time is reached and the number of failures occur.

state-transfer?

Modifies state transfer operations.

Name	Type	Default	Description
chunk-size	int	512	Specifies how many cache entries are batched in each transfer request.
timeout	long	1200000	The time (in milliseconds) to wait for the backup site acknowledge the state chunk received and applied. Default value is 20 min.
max-retries	int	30	Sets the maximum number of retry attempts for push state failures. Specify a value of 0 (zero) to disable retry attempts. The default value is 30.
wait-time	long	2000	Sets the amount of time, in milliseconds, to wait between retry attempts for push state failures. You must specify a value of 1 or more. The default value is 2000.

backup-for?

Defines the local cache as a backup for a remote cache with a different name.

Name	Type	Default	Description
remote-cache	string		Specifies the name of the remote cache that uses the local cache as a backup.
remote-site	string		Specifies the name of the remote site that backs up data to the local cache.

encoding?

The cache encoding configuration.

Defines content type and encoding for keys and values of the cache.

key

Describes the content-type and encoding.

Name	Type	Default	Description
media-type	string

value

Describes the content-type and encoding.

Name	Type	Default	Description
media-type	string

locking?

The locking configuration of the cache.

Name

Type

Default

Description

isolation

NONE	No locking isolation will be performed. This is only valid in local mode. In clustered mode, READ_COMMITTED will be used instead.
READ_UNCOMMITTED	Unsupported. Actually configures READ_COMMITTED
READ_COMMITTED	Read committed is an isolation level that guarantees that any data read is committed at the moment it is read. However, depending on the outcome of other transactions, successive reads may return different results
REPEATABLE_READ	Repeatable read is an isolation level that guarantees that any data read is committed at the moment it is read and that, within a transaction, successive reads will always return the same data.
SERIALIZABLE	Unsupported. Actually configures REPEATABLE_READ

REPEATABLE_READ

Sets the cache locking isolation level. Infinispan only supports READ_COMMITTED or REPEATABLE_READ isolation level.

striping

boolean

false

acquire-timeout

long

10000

Maximum time to attempt a particular lock acquisition.

concurrency-level

int

Concurrency level for lock containers. Adjust this value according to the number of concurrent threads interacting with Infinispan.

transaction?

The cache transaction configuration.

Name

Type

Default

Description

mode

NONE	Cache will not enlist within transactions.
BATCH	Uses batching to group cache operations together.
NON_XA	Cache will enlist within transactions as a javax.transaction.Synchronization
NON_DURABLE_XA	Cache will enlist within transactions as a javax.transaction.xa.XAResource, without recovery.
FULL_XA	Cache will enlist within transactions as a javax.transaction.xa.XAResource, with recovery.

NONE

Sets the cache transaction mode to one of NONE, BATCH, NON_XA, NON_DURABLE_XA, FULL_XA.

stop-timeout

long

30000

locking

OPTIMISTIC	Enables Optimistic locking.
PESSIMISTIC	Enables Pessimistic locking.

OPTIMISTIC

The locking mode for this cache, one of OPTIMISTIC or PESSIMISTIC.

transaction-manager-lookup

string

org.infinispan.transaction.lookup.GenericTransactionManagerLookup

Configure Transaction manager lookup directly using an instance of TransactionManagerLookup. Calling this method marks the cache as transactional.

complete-timeout

long

60000

The duration (millis) in which to keep information about the completion of a transaction. Defaults to 60000.

reaper-interval

long

30000

The time interval (millis) at which the thread that cleans up transaction completion information kicks in. Defaults to 30000.

auto-commit

boolean

true

protocol

DEFAULT
TOTAL_ORDER

(Deprecated, Total Order will be removed) Configures the commit protocol to use.

recovery-cache

string

__recoveryInfoCacheName__

Sets the name of the cache where recovery related information is held. The cache's default name is "__recoveryInfoCacheName__"

notifications

boolean

true

Enables or disables triggering transactional notifications on cache listeners. By default is enabled.

expiration?

The cache expiration configuration.

Name	Type	Default	Description
max-idle	long	-1	Specifies the maximum amount of time, in milliseconds, that cache entries can remain idle. If no operations are performed on entries within the maximum idle time, the entries expire across the cluster. A value of 0 or -1 disables expiration.
lifespan	long	-1	Specifies the maximum amount of time, in milliseconds, that cache entries can exist. After reaching their lifespan, cache entries expire across the cluster. A value of 0 or -1 disables expiration.
interval	long	60000	Specifies the interval, in milliseconds, between expiration runs. A value of 0 or -1 disables the expiration reaper.

store-as-binary?

Configures the cache to store data in binary format.

Name	Type	Default	Description
keys	boolean		Specify whether keys are stored as binary or not. Enabled by default if the "enabled" attribute is set to true.
values	boolean		Specify whether values are stored as binary or not. Enabled by default if the "enabled" attribute is set to true.

persistence?

Configures the persistence layer for caches.

Name	Type	Default	Description
passivation	boolean	false	Enables passivation so that data is written to cache stores only if it is evicted from memory. Subsequent requests for passivated entries restore them to memory and remove them from persistent storage. If you do not enable passivation, writes to entries in memory result in writes to cache stores.
connection-attempts	int	10	Sets the maximum number of attempts to start each configured `CacheWriter` or `CacheLoader`. An exception is thrown and the cache does not start if the number of connection attempts exceeds the maximum.
connection-interval	int	50	Specifies the time, in milliseconds, to wait between connection attempts on startup. A negative or zero value means no wait between connection attempts.
availability-interval	int	1000	Specifies the time, in milliseconds, between availability checks to determine if the PersistenceManager is available. In other words, this interval sets how often stores and loaders are polled via their `org.infinispan.persistence.spi.CacheWriter#isAvailable` or `org.infinispan.persistence.spi.CacheLoader#isAvailable` implementation. If a single store or loader is not available, an exception is thrown during cache operations.

cluster-loader

Defines a cluster cache loader.

Name	Type	Default	Description
remote-timeout	long	15000	The timeout when performing remote calls.

Name	Type	Default	Description
name	string		Unused XML attribute.
shared	boolean	false	Determines if a cache loader is shared between cache instances. Values are true / false (default). This property prevents duplicate writes of data to the cache loader by different cache instances. An example is where all cache instances in a cluster use the same JDBC settings for the same remote, shared database. If true, only the nodes where modifications originate write to the cache store. If false, each cache reacts to potential remote updates by storing the data to the cache store.
preload	boolean	false	Pre-loads data into memory from the cache loader when the cache starts. Values are true / false (default). This property is useful when data in the cache loader is required immediately after startup to prevent delays with cache operations when the data is loaded lazily. This property can provide a "warm cache" on startup but it impacts performance because it affects start time. Pre-loading data is done locally, so any data loaded is stored locally in the node only. Pre-loaded data is not replicated or distributed. Likewise, data is pre-loaded only up to the maximum configured number of entries in eviction.

property*

A cache loader property with name and value.

store

Defines a custom cache store.

Name	Type	Default	Description
class	string		Defines the class name of a cache store that implements either `CacheLoader`, `CacheWriter`, or both.

Name	Type	Default	Description
shared	boolean	false	This setting should be set to true when multiple cache instances share the same cache store (e.g., multiple nodes in a cluster using a JDBC-based CacheStore pointing to the same, shared database.) Setting this to true avoids multiple cache instances writing the same modification multiple times. If enabled, only the node where the modification originated will write to the cache store. If disabled, each individual cache reacts to a potential remote update by storing the data to the cache store.
transactional	boolean	false	This setting should be set to true when the underlying cache store supports transactions and it is desirable for the underlying store and the cache to remain synchronized. With this enabled any Exceptions thrown whilst writing to the underlying store will result in both the store's and cache's transactions rollingback.
preload	boolean	false	If true, when the cache starts, data stored in the cache store will be pre-loaded into memory. This is particularly useful when data in the cache store will be needed immediately after startup and you want to avoid cache operations being delayed as a result of loading this data lazily. Can be used to provide a 'warm-cache' on startup, however there is a performance penalty as startup time is affected by this process.
fetch-state	boolean	false	Fetches the persistent state of a cache when joining a cluster. Values are true / false (default). The purpose of this property is to retrieve the persistent state of a cache and apply it to the local cache store of a node when it joins a cluster. Fetching the persistent state does not apply if a cache store is shared because it accesses the same data as the other stores. This property can be `true` for one configured cache loader only. If more than one cache loader fetches the persistent state, a configuration exception is thrown when the cache service starts.
purge	boolean	false	Empties the specified cache loader at startup. Values are true / false (default). This property takes effect only if read-only is false.
read-only	boolean	false	Prevents data from being persisted to cache stores. Values are true / false (default). If true, cache stores load entries only. Any modifications to data in the cache do not apply to cache stores.
max-batch-size	int	100	Sets the maximum size of a batch to insert or delete from the cache store. If the value is less than one, no upper limit applies to the number of operations in a batch.
segmented	boolean	true	Configures cache stores to store data in hash space segments, with the "hash.numSegments" property defining the number of segments.

write-behind?

Configures cache stores as write-behind instead of write-through.

Name	Type	Default	Description
modification-queue-size	int	1024	Specifies the maximum number of entries in the asynchronous modification queue. When the queue is full, write-through mode is used until the queue can accept new entries.
thread-pool-size	int	1	Specifies the number of threads to apply modifications to the cache store.
fail-silently	boolean	false	Controls how asynchronous write operations take place when cache stores become unavailable. If "true", asynchronous write operations that fail are re-attempted with the number of times specified in the "connection-attempts" parameter. If all attempts fail, errors are ignored and write operations are not executed on the cache store. If "false", asynchronous write operations that fail are re-attempted when the underlying store becomes available. If the modification queue becomes full before the underlying store becomes available, an error is thrown on all future write operations to the store until the modification queue is flushed. The modification queue is not persisted. If the underlying store does not become available before the asynchronous store is stopped, queued modifications are lost.

property*

Defines a cache store property with name and value.

file-store

Defines a filesystem-based cache store.

Name	Type	Description
max-entries	int	Specifies the maximum number of entries that the file store can hold. To increase the speed of lookups, Single File cache stores index keys and their locations in the file. To avoid excessive memory usage, you can configure the maximum number of entries so that entries are removed permanently from both memory and the cache store when the maximum is exceeded. However, this can lead to data loss. You should only set a maximum number of entries if data can be recomputed or retrieved from an authoritative data store. By default, the value is `-1` which means that there is no maximum number of entries.
relative-to	string	Defines the root path on the file system where data is stored.
path	string	Specifies a filesystem directory for data. The value can be a relative or absolute path. Relative paths are created relative to the configured global persistent location. Absolute paths must be subdirectories of the global persistent location, otherwise an exception is thrown.

Name	Type	Default	Description
shared	boolean	false	This setting should be set to true when multiple cache instances share the same cache store (e.g., multiple nodes in a cluster using a JDBC-based CacheStore pointing to the same, shared database.) Setting this to true avoids multiple cache instances writing the same modification multiple times. If enabled, only the node where the modification originated will write to the cache store. If disabled, each individual cache reacts to a potential remote update by storing the data to the cache store.
transactional	boolean	false	This setting should be set to true when the underlying cache store supports transactions and it is desirable for the underlying store and the cache to remain synchronized. With this enabled any Exceptions thrown whilst writing to the underlying store will result in both the store's and cache's transactions rollingback.
preload	boolean	false	If true, when the cache starts, data stored in the cache store will be pre-loaded into memory. This is particularly useful when data in the cache store will be needed immediately after startup and you want to avoid cache operations being delayed as a result of loading this data lazily. Can be used to provide a 'warm-cache' on startup, however there is a performance penalty as startup time is affected by this process.
fetch-state	boolean	false	Fetches the persistent state of a cache when joining a cluster. Values are true / false (default). The purpose of this property is to retrieve the persistent state of a cache and apply it to the local cache store of a node when it joins a cluster. Fetching the persistent state does not apply if a cache store is shared because it accesses the same data as the other stores. This property can be `true` for one configured cache loader only. If more than one cache loader fetches the persistent state, a configuration exception is thrown when the cache service starts.
purge	boolean	false	Empties the specified cache loader at startup. Values are true / false (default). This property takes effect only if read-only is false.
read-only	boolean	false	Prevents data from being persisted to cache stores. Values are true / false (default). If true, cache stores load entries only. Any modifications to data in the cache do not apply to cache stores.
max-batch-size	int	100	Sets the maximum size of a batch to insert or delete from the cache store. If the value is less than one, no upper limit applies to the number of operations in a batch.
segmented	boolean	true	Configures cache stores to store data in hash space segments, with the "hash.numSegments" property defining the number of segments.

write-behind?

Configures cache stores as write-behind instead of write-through.

Name	Type	Default	Description
modification-queue-size	int	1024	Specifies the maximum number of entries in the asynchronous modification queue. When the queue is full, write-through mode is used until the queue can accept new entries.
thread-pool-size	int	1	Specifies the number of threads to apply modifications to the cache store.
fail-silently	boolean	false	Controls how asynchronous write operations take place when cache stores become unavailable. If "true", asynchronous write operations that fail are re-attempted with the number of times specified in the "connection-attempts" parameter. If all attempts fail, errors are ignored and write operations are not executed on the cache store. If "false", asynchronous write operations that fail are re-attempted when the underlying store becomes available. If the modification queue becomes full before the underlying store becomes available, an error is thrown on all future write operations to the store until the modification queue is flushed. The modification queue is not persisted. If the underlying store does not become available before the asynchronous store is stopped, queued modifications are lost.

property*

Defines a cache store property with name and value.

memory?

Controls how the entries are stored in memory

object

Store keys and values as instance variables in the Java heap. Instances of byte[] are wrapped to ensure equality. This is the default storage format.

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs when the number of entries exceeds the size.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

binary

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs either when the number of entries or amount of memory exceeds the size.

eviction

COUNT	Evict entries from the cache when the number of entries reaches the configured size.
MEMORY	Evict entries from the cache when the amount of memory in use reaches the configured size.

Specifies whether eviction is based on the number of entries or the amount of memory used.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

off-heap

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs either when the number of entries or amount of memory exceeds the size.

eviction

COUNT	Evict entries from the cache when the number of entries reaches the configured size.
MEMORY	Evict entries from the cache when the amount of memory in use reaches the configured size.

Specifies whether eviction is based on the number of entries or the amount of memory used.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

indexing?

Defines indexing options for cache

Name

Type

Default

Description

index

NONE	Do not index data. This is the default.
LOCAL	Only index changes made locally, ignoring remote changes. This is useful if indexes are shared across a cluster to prevent redundant indexing of updates.
ALL	Index all data
PRIMARY_OWNER	Only index changes on the primary owner, regardless of it's local or remote.

NONE

The indexing mode of the cache. Defaults to NONE.

auto-config

boolean

false

Whether or not to apply automatic index configuration based on cache type

key-transformers?

Defines the Transformers used to stringify keys for indexing with Lucene

key-transformer*

Defines the Transformer to use for the specified key class

Name	Type	Default	Description
key	string
transformer	string

indexed-entities?

Defines the indexed entity classes

indexed-entity*

Indexed entity class name

property*

Property to pass on to the indexing system

custom-interceptors?

Deprecated since 10.0, will be removed without a replacement. Configures custom interceptors to be added to the cache.

interceptor*

Deprecated since 10.0, will be removed without a replacement.

Name	Type	Description
after	string	Dictates that the custom interceptor appears immediately after the specified interceptor. If the specified interceptor is not found in the interceptor chain, a ConfigurationException will be thrown when the cache starts.
before	string	Dictates that the custom interceptor appears immediately before the specified interceptor. If the specified interceptor is not found in the interceptor chain, a ConfigurationException will be thrown when the cache starts.
class	string	A fully qualified class name of the new custom interceptor to add to the configuration.
index	int	Specifies a position in the interceptor chain to place the new interceptor. The index starts at 0 and goes up to the number of interceptors in a given configuration. A ConfigurationException is thrown if the index is less than 0 or greater than the maximum number of interceptors in the chain.
position	string	Specifies a position where to place the new interceptor. Allowed values are FIRST, LAST, and OTHER_THAN_FIRST_OR_LAST

property?

security?

Configures cache-level security.

authorization?

Configures authorization for this cache.

Name	Type	Default	Description
enabled	boolean	false	Enables authorization checks for this cache. Defaults to true if the authorization element is present.
roles			Sets the valid roles required to access this cache.

scattered-cache

Defines a SCATTERED_* mode cache. Since 9.0.

Name	Type	Default	Description
segments	int	256	Number of hash space segments (per cluster). The default value is 256, and should be at least 20 * cluster size.
capacity	float	1	Controls the proportion of entries that will reside on the local node, compared to the other nodes in the cluster. This is just a suggestion, there is no guarantee that a node with a capacity factor of 2 will have twice as many entries as a node with a capacity factor of 1.
consistent-hash-factory	string		The factory to use for generating the consistent hash. Must implement `org.infinispan.distribution.ch.ConsistentHashFactory`. E.g. `org.infinispan.distribution.ch.impl.SyncConsistentHashFactory` can be used to guarantee that multiple distributed caches use exactly the same consistent hash, which for performance reasons is not guaranteed by the default consistent hash factory instance used.
key-partitioner	string		The name of the key partitioner class. Must implement `org.infinispan.distribution.ch.KeyPartitioner`. A custom key partitioner can be used as an alternative to grouping, to guarantee that some keys are located in the same segment (and thus their primary owner is the same node). Since 8.2.
invalidation-batch-size	integer	128	Threshold for sending batch invalidations. Once a node registers more updated keys, it sends a batch invalidation to all nodes requesting to remove old versions of the entries. The threshold is also used for second batch invalidation of tombstones for removed entries.

state-transfer?

The state transfer configuration for distribution and replicated caches.

Name	Type	Default	Description
enabled	boolean	true	If enabled, this will cause the cache to ask neighboring caches for state when it starts up, so the cache starts 'warm', although it will impact startup time.
timeout	long	240000	The maximum amount of time (ms) to wait for state from neighboring caches, before throwing an exception and aborting startup.
chunk-size	integer	512	The number of cache entries to batch in each transfer.
await-initial-transfer	boolean	true	If enabled, this will cause the cache to wait for initial state transfer to complete before responding to requests.

groups?

Configures grouping of data.

Name	Type	Default	Description
enabled	boolean		Enables or disables grouping.

grouper*

Name	Type	Default	Description
class	string		The class to use to group keys. Must implement org.infinispan.distribution.group.Grouper.

Name

Type

Default

Description

mode

ASYNC	Enables asynchronous mode.
SYNC	Enables synchronous mode.

SYNC

Sets the clustered cache mode, ASYNC for asynchronous operation, or SYNC for synchronous operation.

remote-timeout

long

15000

In SYNC mode, the timeout (in ms) used to wait for an acknowledgment when making a remote call, after which the call is aborted and an exception is thrown.

partition-handling?

Configures the way this cache reacts to node crashes and split brains.

Name

Type

Default

Description

enabled

boolean

Deprecated, use type instead. Enable/disable the partition handling functionality. Defaults to false.

when-split

DENY_READ_WRITES	If the partition does not have all owners for a given segment, both reads and writes are denied for all keys in that segment.
ALLOW_READS	Allows reads for a given key if it exists in this partition, but only allows writes if this partition contains all owners of a segment.
ALLOW_READ_WRITES	Allow entries on each partition to diverge, with conflicts resolved during merge.

ALLOW_READ_WRITES

The type of actions that are possible when a split brain scenario is encountered.

merge-policy

NONE

The entry merge policy which should be applied on partition merges.

Name	Type	Default	Description
name	ID		Uniquely identifies this cache within its cache container.
configuration	IDREF		The name of the cache configuration which this configuration inherits from.
start	FIXME		Unused XML attribute
jndi-name	string		Unused XML attribute
module	string		Unused XML attribute
statistics	boolean	false	Determines whether or not the cache should collect statistics. Keep disabled for optimal performance.
statistics-available	boolean	true	If set to false, statistics gathering cannot be enabled during runtime. Keep disabled for optimal performance.
unreliable-return-values	boolean	false	Specifies whether Infinispan is allowed to disregard the Map contract when providing return values for org.infinispan.Cache#put(Object, Object) and org.infinispan.Cache#remove(Object) methods.

backups?

Defines backup locations for cache data and modifies state transfer properties.

backup*

Configures a remote site as a backup location for cache data.

Name

Type

Default

Description

site

string

Names the remote site to which the cache backs up data.

strategy

ASYNC	Enables asynchronous mode.
SYNC	Enables synchronous mode.

ASYNC

Sets the strategy for backing up to a remote site.

failure-policy

IGNORE	Ignore failed backup operations and write to the local cache.
WARN	Log exceptions when backup operations fail and write to the local cache.
FAIL	Throw exceptions when backup operations fail and attempt to stop writes to the local cache.
CUSTOM	Use a custom failure policy. Requires the "failure-policy-class" attribute.

WARN

Controls how local writes to caches are handled if synchronous backup operations fail.

timeout

long

15000

Specifies timeout, in milliseconds, for synchronous and asynchronous backup operations.

enabled

boolean

true

Enables backup locations. Set the value to "false" to disable backups.

two-phase-commit

boolean

false

Enables two-phase commits for optimistic transactional caches with the synchronous backup strategy only.

failure-policy-class

string

Specifies the fully qualified name of a class that implements the CustomFailurePolicy interface. Use if failure-policy="CUSTOM".

take-offline?

Specifies the number of failures that can occur before backup locations go offline.

Name	Type	Default	Description
after-failures	int	0	Sets the number of consecutive failures that can occur for backup operations before sites go offline. Specify a negative or zero value to ignore this attribute and use minimum wait time only ("min-wait").
min-wait	long	0	Sets the minimum time to wait, in milliseconds, before sites go offline when backup operations fail. If subsequent operations are successful, the minimum wait time is reset. If you set "after-failures", sites go offline when the wait time is reached and the number of failures occur.

state-transfer?

Modifies state transfer operations.

Name	Type	Default	Description
chunk-size	int	512	Specifies how many cache entries are batched in each transfer request.
timeout	long	1200000	The time (in milliseconds) to wait for the backup site acknowledge the state chunk received and applied. Default value is 20 min.
max-retries	int	30	Sets the maximum number of retry attempts for push state failures. Specify a value of 0 (zero) to disable retry attempts. The default value is 30.
wait-time	long	2000	Sets the amount of time, in milliseconds, to wait between retry attempts for push state failures. You must specify a value of 1 or more. The default value is 2000.

backup-for?

Defines the local cache as a backup for a remote cache with a different name.

Name	Type	Default	Description
remote-cache	string		Specifies the name of the remote cache that uses the local cache as a backup.
remote-site	string		Specifies the name of the remote site that backs up data to the local cache.

encoding?

The cache encoding configuration.

Defines content type and encoding for keys and values of the cache.

key

Describes the content-type and encoding.

Name	Type	Default	Description
media-type	string

value

Describes the content-type and encoding.

Name	Type	Default	Description
media-type	string

locking?

The locking configuration of the cache.

Name

Type

Default

Description

isolation

NONE	No locking isolation will be performed. This is only valid in local mode. In clustered mode, READ_COMMITTED will be used instead.
READ_UNCOMMITTED	Unsupported. Actually configures READ_COMMITTED
READ_COMMITTED	Read committed is an isolation level that guarantees that any data read is committed at the moment it is read. However, depending on the outcome of other transactions, successive reads may return different results
REPEATABLE_READ	Repeatable read is an isolation level that guarantees that any data read is committed at the moment it is read and that, within a transaction, successive reads will always return the same data.
SERIALIZABLE	Unsupported. Actually configures REPEATABLE_READ

REPEATABLE_READ

Sets the cache locking isolation level. Infinispan only supports READ_COMMITTED or REPEATABLE_READ isolation level.

striping

boolean

false

acquire-timeout

long

10000

Maximum time to attempt a particular lock acquisition.

concurrency-level

int

Concurrency level for lock containers. Adjust this value according to the number of concurrent threads interacting with Infinispan.

transaction?

The cache transaction configuration.

Name

Type

Default

Description

mode

NONE	Cache will not enlist within transactions.
BATCH	Uses batching to group cache operations together.
NON_XA	Cache will enlist within transactions as a javax.transaction.Synchronization
NON_DURABLE_XA	Cache will enlist within transactions as a javax.transaction.xa.XAResource, without recovery.
FULL_XA	Cache will enlist within transactions as a javax.transaction.xa.XAResource, with recovery.

NONE

Sets the cache transaction mode to one of NONE, BATCH, NON_XA, NON_DURABLE_XA, FULL_XA.

stop-timeout

long

30000

locking

OPTIMISTIC	Enables Optimistic locking.
PESSIMISTIC	Enables Pessimistic locking.

OPTIMISTIC

The locking mode for this cache, one of OPTIMISTIC or PESSIMISTIC.

transaction-manager-lookup

string

org.infinispan.transaction.lookup.GenericTransactionManagerLookup

Configure Transaction manager lookup directly using an instance of TransactionManagerLookup. Calling this method marks the cache as transactional.

complete-timeout

long

60000

The duration (millis) in which to keep information about the completion of a transaction. Defaults to 60000.

reaper-interval

long

30000

The time interval (millis) at which the thread that cleans up transaction completion information kicks in. Defaults to 30000.

auto-commit

boolean

true

protocol

DEFAULT
TOTAL_ORDER

(Deprecated, Total Order will be removed) Configures the commit protocol to use.

recovery-cache

string

__recoveryInfoCacheName__

Sets the name of the cache where recovery related information is held. The cache's default name is "__recoveryInfoCacheName__"

notifications

boolean

true

Enables or disables triggering transactional notifications on cache listeners. By default is enabled.

expiration?

The cache expiration configuration.

Name	Type	Default	Description
max-idle	long	-1	Specifies the maximum amount of time, in milliseconds, that cache entries can remain idle. If no operations are performed on entries within the maximum idle time, the entries expire across the cluster. A value of 0 or -1 disables expiration.
lifespan	long	-1	Specifies the maximum amount of time, in milliseconds, that cache entries can exist. After reaching their lifespan, cache entries expire across the cluster. A value of 0 or -1 disables expiration.
interval	long	60000	Specifies the interval, in milliseconds, between expiration runs. A value of 0 or -1 disables the expiration reaper.

store-as-binary?

Configures the cache to store data in binary format.

Name	Type	Default	Description
keys	boolean		Specify whether keys are stored as binary or not. Enabled by default if the "enabled" attribute is set to true.
values	boolean		Specify whether values are stored as binary or not. Enabled by default if the "enabled" attribute is set to true.

persistence?

Configures the persistence layer for caches.

Name	Type	Default	Description
passivation	boolean	false	Enables passivation so that data is written to cache stores only if it is evicted from memory. Subsequent requests for passivated entries restore them to memory and remove them from persistent storage. If you do not enable passivation, writes to entries in memory result in writes to cache stores.
connection-attempts	int	10	Sets the maximum number of attempts to start each configured `CacheWriter` or `CacheLoader`. An exception is thrown and the cache does not start if the number of connection attempts exceeds the maximum.
connection-interval	int	50	Specifies the time, in milliseconds, to wait between connection attempts on startup. A negative or zero value means no wait between connection attempts.
availability-interval	int	1000	Specifies the time, in milliseconds, between availability checks to determine if the PersistenceManager is available. In other words, this interval sets how often stores and loaders are polled via their `org.infinispan.persistence.spi.CacheWriter#isAvailable` or `org.infinispan.persistence.spi.CacheLoader#isAvailable` implementation. If a single store or loader is not available, an exception is thrown during cache operations.

cluster-loader

Defines a cluster cache loader.

Name	Type	Default	Description
remote-timeout	long	15000	The timeout when performing remote calls.

Name	Type	Default	Description
name	string		Unused XML attribute.
shared	boolean	false	Determines if a cache loader is shared between cache instances. Values are true / false (default). This property prevents duplicate writes of data to the cache loader by different cache instances. An example is where all cache instances in a cluster use the same JDBC settings for the same remote, shared database. If true, only the nodes where modifications originate write to the cache store. If false, each cache reacts to potential remote updates by storing the data to the cache store.
preload	boolean	false	Pre-loads data into memory from the cache loader when the cache starts. Values are true / false (default). This property is useful when data in the cache loader is required immediately after startup to prevent delays with cache operations when the data is loaded lazily. This property can provide a "warm cache" on startup but it impacts performance because it affects start time. Pre-loading data is done locally, so any data loaded is stored locally in the node only. Pre-loaded data is not replicated or distributed. Likewise, data is pre-loaded only up to the maximum configured number of entries in eviction.

property*

A cache loader property with name and value.

store

Defines a custom cache store.

Name	Type	Default	Description
class	string		Defines the class name of a cache store that implements either `CacheLoader`, `CacheWriter`, or both.

Name	Type	Default	Description
shared	boolean	false	This setting should be set to true when multiple cache instances share the same cache store (e.g., multiple nodes in a cluster using a JDBC-based CacheStore pointing to the same, shared database.) Setting this to true avoids multiple cache instances writing the same modification multiple times. If enabled, only the node where the modification originated will write to the cache store. If disabled, each individual cache reacts to a potential remote update by storing the data to the cache store.
transactional	boolean	false	This setting should be set to true when the underlying cache store supports transactions and it is desirable for the underlying store and the cache to remain synchronized. With this enabled any Exceptions thrown whilst writing to the underlying store will result in both the store's and cache's transactions rollingback.
preload	boolean	false	If true, when the cache starts, data stored in the cache store will be pre-loaded into memory. This is particularly useful when data in the cache store will be needed immediately after startup and you want to avoid cache operations being delayed as a result of loading this data lazily. Can be used to provide a 'warm-cache' on startup, however there is a performance penalty as startup time is affected by this process.
fetch-state	boolean	false	Fetches the persistent state of a cache when joining a cluster. Values are true / false (default). The purpose of this property is to retrieve the persistent state of a cache and apply it to the local cache store of a node when it joins a cluster. Fetching the persistent state does not apply if a cache store is shared because it accesses the same data as the other stores. This property can be `true` for one configured cache loader only. If more than one cache loader fetches the persistent state, a configuration exception is thrown when the cache service starts.
purge	boolean	false	Empties the specified cache loader at startup. Values are true / false (default). This property takes effect only if read-only is false.
read-only	boolean	false	Prevents data from being persisted to cache stores. Values are true / false (default). If true, cache stores load entries only. Any modifications to data in the cache do not apply to cache stores.
max-batch-size	int	100	Sets the maximum size of a batch to insert or delete from the cache store. If the value is less than one, no upper limit applies to the number of operations in a batch.
segmented	boolean	true	Configures cache stores to store data in hash space segments, with the "hash.numSegments" property defining the number of segments.

write-behind?

Configures cache stores as write-behind instead of write-through.

Name	Type	Default	Description
modification-queue-size	int	1024	Specifies the maximum number of entries in the asynchronous modification queue. When the queue is full, write-through mode is used until the queue can accept new entries.
thread-pool-size	int	1	Specifies the number of threads to apply modifications to the cache store.
fail-silently	boolean	false	Controls how asynchronous write operations take place when cache stores become unavailable. If "true", asynchronous write operations that fail are re-attempted with the number of times specified in the "connection-attempts" parameter. If all attempts fail, errors are ignored and write operations are not executed on the cache store. If "false", asynchronous write operations that fail are re-attempted when the underlying store becomes available. If the modification queue becomes full before the underlying store becomes available, an error is thrown on all future write operations to the store until the modification queue is flushed. The modification queue is not persisted. If the underlying store does not become available before the asynchronous store is stopped, queued modifications are lost.

property*

Defines a cache store property with name and value.

file-store

Defines a filesystem-based cache store.

Name	Type	Description
max-entries	int	Specifies the maximum number of entries that the file store can hold. To increase the speed of lookups, Single File cache stores index keys and their locations in the file. To avoid excessive memory usage, you can configure the maximum number of entries so that entries are removed permanently from both memory and the cache store when the maximum is exceeded. However, this can lead to data loss. You should only set a maximum number of entries if data can be recomputed or retrieved from an authoritative data store. By default, the value is `-1` which means that there is no maximum number of entries.
relative-to	string	Defines the root path on the file system where data is stored.
path	string	Specifies a filesystem directory for data. The value can be a relative or absolute path. Relative paths are created relative to the configured global persistent location. Absolute paths must be subdirectories of the global persistent location, otherwise an exception is thrown.

Name	Type	Default	Description
shared	boolean	false	This setting should be set to true when multiple cache instances share the same cache store (e.g., multiple nodes in a cluster using a JDBC-based CacheStore pointing to the same, shared database.) Setting this to true avoids multiple cache instances writing the same modification multiple times. If enabled, only the node where the modification originated will write to the cache store. If disabled, each individual cache reacts to a potential remote update by storing the data to the cache store.
transactional	boolean	false	This setting should be set to true when the underlying cache store supports transactions and it is desirable for the underlying store and the cache to remain synchronized. With this enabled any Exceptions thrown whilst writing to the underlying store will result in both the store's and cache's transactions rollingback.
preload	boolean	false	If true, when the cache starts, data stored in the cache store will be pre-loaded into memory. This is particularly useful when data in the cache store will be needed immediately after startup and you want to avoid cache operations being delayed as a result of loading this data lazily. Can be used to provide a 'warm-cache' on startup, however there is a performance penalty as startup time is affected by this process.
fetch-state	boolean	false	Fetches the persistent state of a cache when joining a cluster. Values are true / false (default). The purpose of this property is to retrieve the persistent state of a cache and apply it to the local cache store of a node when it joins a cluster. Fetching the persistent state does not apply if a cache store is shared because it accesses the same data as the other stores. This property can be `true` for one configured cache loader only. If more than one cache loader fetches the persistent state, a configuration exception is thrown when the cache service starts.
purge	boolean	false	Empties the specified cache loader at startup. Values are true / false (default). This property takes effect only if read-only is false.
read-only	boolean	false	Prevents data from being persisted to cache stores. Values are true / false (default). If true, cache stores load entries only. Any modifications to data in the cache do not apply to cache stores.
max-batch-size	int	100	Sets the maximum size of a batch to insert or delete from the cache store. If the value is less than one, no upper limit applies to the number of operations in a batch.
segmented	boolean	true	Configures cache stores to store data in hash space segments, with the "hash.numSegments" property defining the number of segments.

write-behind?

Configures cache stores as write-behind instead of write-through.

Name	Type	Default	Description
modification-queue-size	int	1024	Specifies the maximum number of entries in the asynchronous modification queue. When the queue is full, write-through mode is used until the queue can accept new entries.
thread-pool-size	int	1	Specifies the number of threads to apply modifications to the cache store.
fail-silently	boolean	false	Controls how asynchronous write operations take place when cache stores become unavailable. If "true", asynchronous write operations that fail are re-attempted with the number of times specified in the "connection-attempts" parameter. If all attempts fail, errors are ignored and write operations are not executed on the cache store. If "false", asynchronous write operations that fail are re-attempted when the underlying store becomes available. If the modification queue becomes full before the underlying store becomes available, an error is thrown on all future write operations to the store until the modification queue is flushed. The modification queue is not persisted. If the underlying store does not become available before the asynchronous store is stopped, queued modifications are lost.

property*

Defines a cache store property with name and value.

memory?

Controls how the entries are stored in memory

object

Store keys and values as instance variables in the Java heap. Instances of byte[] are wrapped to ensure equality. This is the default storage format.

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs when the number of entries exceeds the size.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

binary

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs either when the number of entries or amount of memory exceeds the size.

eviction

COUNT	Evict entries from the cache when the number of entries reaches the configured size.
MEMORY	Evict entries from the cache when the amount of memory in use reaches the configured size.

Specifies whether eviction is based on the number of entries or the amount of memory used.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

off-heap

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs either when the number of entries or amount of memory exceeds the size.

eviction

COUNT	Evict entries from the cache when the number of entries reaches the configured size.
MEMORY	Evict entries from the cache when the amount of memory in use reaches the configured size.

Specifies whether eviction is based on the number of entries or the amount of memory used.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

indexing?

Defines indexing options for cache

Name

Type

Default

Description

index

NONE	Do not index data. This is the default.
LOCAL	Only index changes made locally, ignoring remote changes. This is useful if indexes are shared across a cluster to prevent redundant indexing of updates.
ALL	Index all data
PRIMARY_OWNER	Only index changes on the primary owner, regardless of it's local or remote.

NONE

The indexing mode of the cache. Defaults to NONE.

auto-config

boolean

false

Whether or not to apply automatic index configuration based on cache type

key-transformers?

Defines the Transformers used to stringify keys for indexing with Lucene

key-transformer*

Defines the Transformer to use for the specified key class

Name	Type	Default	Description
key	string
transformer	string

indexed-entities?

Defines the indexed entity classes

indexed-entity*

Indexed entity class name

property*

Property to pass on to the indexing system

custom-interceptors?

Deprecated since 10.0, will be removed without a replacement. Configures custom interceptors to be added to the cache.

interceptor*

Deprecated since 10.0, will be removed without a replacement.

Name	Type	Description
after	string	Dictates that the custom interceptor appears immediately after the specified interceptor. If the specified interceptor is not found in the interceptor chain, a ConfigurationException will be thrown when the cache starts.
before	string	Dictates that the custom interceptor appears immediately before the specified interceptor. If the specified interceptor is not found in the interceptor chain, a ConfigurationException will be thrown when the cache starts.
class	string	A fully qualified class name of the new custom interceptor to add to the configuration.
index	int	Specifies a position in the interceptor chain to place the new interceptor. The index starts at 0 and goes up to the number of interceptors in a given configuration. A ConfigurationException is thrown if the index is less than 0 or greater than the maximum number of interceptors in the chain.
position	string	Specifies a position where to place the new interceptor. Allowed values are FIRST, LAST, and OTHER_THAN_FIRST_OR_LAST

property?

security?

Configures cache-level security.

authorization?

Configures authorization for this cache.

Name	Type	Default	Description
enabled	boolean	false	Enables authorization checks for this cache. Defaults to true if the authorization element is present.
roles			Sets the valid roles required to access this cache.

scattered-cache-configuration

Defines a SCATTERED_* mode cache configuration. Since 9.0.

Name	Type	Default	Description
segments	int	256	Number of hash space segments (per cluster). The default value is 256, and should be at least 20 * cluster size.
capacity	float	1	Controls the proportion of entries that will reside on the local node, compared to the other nodes in the cluster. This is just a suggestion, there is no guarantee that a node with a capacity factor of 2 will have twice as many entries as a node with a capacity factor of 1.
consistent-hash-factory	string		The factory to use for generating the consistent hash. Must implement `org.infinispan.distribution.ch.ConsistentHashFactory`. E.g. `org.infinispan.distribution.ch.impl.SyncConsistentHashFactory` can be used to guarantee that multiple distributed caches use exactly the same consistent hash, which for performance reasons is not guaranteed by the default consistent hash factory instance used.
key-partitioner	string		The name of the key partitioner class. Must implement `org.infinispan.distribution.ch.KeyPartitioner`. A custom key partitioner can be used as an alternative to grouping, to guarantee that some keys are located in the same segment (and thus their primary owner is the same node). Since 8.2.
invalidation-batch-size	integer	128	Threshold for sending batch invalidations. Once a node registers more updated keys, it sends a batch invalidation to all nodes requesting to remove old versions of the entries. The threshold is also used for second batch invalidation of tombstones for removed entries.

state-transfer?

The state transfer configuration for distribution and replicated caches.

Name	Type	Default	Description
enabled	boolean	true	If enabled, this will cause the cache to ask neighboring caches for state when it starts up, so the cache starts 'warm', although it will impact startup time.
timeout	long	240000	The maximum amount of time (ms) to wait for state from neighboring caches, before throwing an exception and aborting startup.
chunk-size	integer	512	The number of cache entries to batch in each transfer.
await-initial-transfer	boolean	true	If enabled, this will cause the cache to wait for initial state transfer to complete before responding to requests.

groups?

Configures grouping of data.

Name	Type	Default	Description
enabled	boolean		Enables or disables grouping.

grouper*

Name	Type	Default	Description
class	string		The class to use to group keys. Must implement org.infinispan.distribution.group.Grouper.

Name

Type

Default

Description

mode

ASYNC	Enables asynchronous mode.
SYNC	Enables synchronous mode.

SYNC

Sets the clustered cache mode, ASYNC for asynchronous operation, or SYNC for synchronous operation.

remote-timeout

long

15000

In SYNC mode, the timeout (in ms) used to wait for an acknowledgment when making a remote call, after which the call is aborted and an exception is thrown.

partition-handling?

Configures the way this cache reacts to node crashes and split brains.

Name

Type

Default

Description

enabled

boolean

Deprecated, use type instead. Enable/disable the partition handling functionality. Defaults to false.

when-split

DENY_READ_WRITES	If the partition does not have all owners for a given segment, both reads and writes are denied for all keys in that segment.
ALLOW_READS	Allows reads for a given key if it exists in this partition, but only allows writes if this partition contains all owners of a segment.
ALLOW_READ_WRITES	Allow entries on each partition to diverge, with conflicts resolved during merge.

ALLOW_READ_WRITES

The type of actions that are possible when a split brain scenario is encountered.

merge-policy

NONE

The entry merge policy which should be applied on partition merges.

Name	Type	Default	Description
name	ID		Uniquely identifies this cache within its cache container.
configuration	IDREF		The name of the cache configuration which this configuration inherits from.
start	FIXME		Unused XML attribute
jndi-name	string		Unused XML attribute
module	string		Unused XML attribute
statistics	boolean	false	Determines whether or not the cache should collect statistics. Keep disabled for optimal performance.
statistics-available	boolean	true	If set to false, statistics gathering cannot be enabled during runtime. Keep disabled for optimal performance.
unreliable-return-values	boolean	false	Specifies whether Infinispan is allowed to disregard the Map contract when providing return values for org.infinispan.Cache#put(Object, Object) and org.infinispan.Cache#remove(Object) methods.

backups?

Defines backup locations for cache data and modifies state transfer properties.

backup*

Configures a remote site as a backup location for cache data.

Name

Type

Default

Description

site

string

Names the remote site to which the cache backs up data.

strategy

ASYNC	Enables asynchronous mode.
SYNC	Enables synchronous mode.

ASYNC

Sets the strategy for backing up to a remote site.

failure-policy

IGNORE	Ignore failed backup operations and write to the local cache.
WARN	Log exceptions when backup operations fail and write to the local cache.
FAIL	Throw exceptions when backup operations fail and attempt to stop writes to the local cache.
CUSTOM	Use a custom failure policy. Requires the "failure-policy-class" attribute.

WARN

Controls how local writes to caches are handled if synchronous backup operations fail.

timeout

long

15000

Specifies timeout, in milliseconds, for synchronous and asynchronous backup operations.

enabled

boolean

true

Enables backup locations. Set the value to "false" to disable backups.

two-phase-commit

boolean

false

Enables two-phase commits for optimistic transactional caches with the synchronous backup strategy only.

failure-policy-class

string

Specifies the fully qualified name of a class that implements the CustomFailurePolicy interface. Use if failure-policy="CUSTOM".

take-offline?

Specifies the number of failures that can occur before backup locations go offline.

Name	Type	Default	Description
after-failures	int	0	Sets the number of consecutive failures that can occur for backup operations before sites go offline. Specify a negative or zero value to ignore this attribute and use minimum wait time only ("min-wait").
min-wait	long	0	Sets the minimum time to wait, in milliseconds, before sites go offline when backup operations fail. If subsequent operations are successful, the minimum wait time is reset. If you set "after-failures", sites go offline when the wait time is reached and the number of failures occur.

state-transfer?

Modifies state transfer operations.

Name	Type	Default	Description
chunk-size	int	512	Specifies how many cache entries are batched in each transfer request.
timeout	long	1200000	The time (in milliseconds) to wait for the backup site acknowledge the state chunk received and applied. Default value is 20 min.
max-retries	int	30	Sets the maximum number of retry attempts for push state failures. Specify a value of 0 (zero) to disable retry attempts. The default value is 30.
wait-time	long	2000	Sets the amount of time, in milliseconds, to wait between retry attempts for push state failures. You must specify a value of 1 or more. The default value is 2000.

backup-for?

Defines the local cache as a backup for a remote cache with a different name.

Name	Type	Default	Description
remote-cache	string		Specifies the name of the remote cache that uses the local cache as a backup.
remote-site	string		Specifies the name of the remote site that backs up data to the local cache.

encoding?

The cache encoding configuration.

Defines content type and encoding for keys and values of the cache.

key

Describes the content-type and encoding.

Name	Type	Default	Description
media-type	string

value

Describes the content-type and encoding.

Name	Type	Default	Description
media-type	string

locking?

The locking configuration of the cache.

Name

Type

Default

Description

isolation

NONE	No locking isolation will be performed. This is only valid in local mode. In clustered mode, READ_COMMITTED will be used instead.
READ_UNCOMMITTED	Unsupported. Actually configures READ_COMMITTED
READ_COMMITTED	Read committed is an isolation level that guarantees that any data read is committed at the moment it is read. However, depending on the outcome of other transactions, successive reads may return different results
REPEATABLE_READ	Repeatable read is an isolation level that guarantees that any data read is committed at the moment it is read and that, within a transaction, successive reads will always return the same data.
SERIALIZABLE	Unsupported. Actually configures REPEATABLE_READ

REPEATABLE_READ

Sets the cache locking isolation level. Infinispan only supports READ_COMMITTED or REPEATABLE_READ isolation level.

striping

boolean

false

acquire-timeout

long

10000

Maximum time to attempt a particular lock acquisition.

concurrency-level

int

Concurrency level for lock containers. Adjust this value according to the number of concurrent threads interacting with Infinispan.

transaction?

The cache transaction configuration.

Name

Type

Default

Description

mode

NONE	Cache will not enlist within transactions.
BATCH	Uses batching to group cache operations together.
NON_XA	Cache will enlist within transactions as a javax.transaction.Synchronization
NON_DURABLE_XA	Cache will enlist within transactions as a javax.transaction.xa.XAResource, without recovery.
FULL_XA	Cache will enlist within transactions as a javax.transaction.xa.XAResource, with recovery.

NONE

Sets the cache transaction mode to one of NONE, BATCH, NON_XA, NON_DURABLE_XA, FULL_XA.

stop-timeout

long

30000

locking

OPTIMISTIC	Enables Optimistic locking.
PESSIMISTIC	Enables Pessimistic locking.

OPTIMISTIC

The locking mode for this cache, one of OPTIMISTIC or PESSIMISTIC.

transaction-manager-lookup

string

org.infinispan.transaction.lookup.GenericTransactionManagerLookup

Configure Transaction manager lookup directly using an instance of TransactionManagerLookup. Calling this method marks the cache as transactional.

complete-timeout

long

60000

The duration (millis) in which to keep information about the completion of a transaction. Defaults to 60000.

reaper-interval

long

30000

The time interval (millis) at which the thread that cleans up transaction completion information kicks in. Defaults to 30000.

auto-commit

boolean

true

protocol

DEFAULT
TOTAL_ORDER

(Deprecated, Total Order will be removed) Configures the commit protocol to use.

recovery-cache

string

__recoveryInfoCacheName__

Sets the name of the cache where recovery related information is held. The cache's default name is "__recoveryInfoCacheName__"

notifications

boolean

true

Enables or disables triggering transactional notifications on cache listeners. By default is enabled.

expiration?

The cache expiration configuration.

Name	Type	Default	Description
max-idle	long	-1	Specifies the maximum amount of time, in milliseconds, that cache entries can remain idle. If no operations are performed on entries within the maximum idle time, the entries expire across the cluster. A value of 0 or -1 disables expiration.
lifespan	long	-1	Specifies the maximum amount of time, in milliseconds, that cache entries can exist. After reaching their lifespan, cache entries expire across the cluster. A value of 0 or -1 disables expiration.
interval	long	60000	Specifies the interval, in milliseconds, between expiration runs. A value of 0 or -1 disables the expiration reaper.

store-as-binary?

Configures the cache to store data in binary format.

Name	Type	Default	Description
keys	boolean		Specify whether keys are stored as binary or not. Enabled by default if the "enabled" attribute is set to true.
values	boolean		Specify whether values are stored as binary or not. Enabled by default if the "enabled" attribute is set to true.

persistence?

Configures the persistence layer for caches.

Name	Type	Default	Description
passivation	boolean	false	Enables passivation so that data is written to cache stores only if it is evicted from memory. Subsequent requests for passivated entries restore them to memory and remove them from persistent storage. If you do not enable passivation, writes to entries in memory result in writes to cache stores.
connection-attempts	int	10	Sets the maximum number of attempts to start each configured `CacheWriter` or `CacheLoader`. An exception is thrown and the cache does not start if the number of connection attempts exceeds the maximum.
connection-interval	int	50	Specifies the time, in milliseconds, to wait between connection attempts on startup. A negative or zero value means no wait between connection attempts.
availability-interval	int	1000	Specifies the time, in milliseconds, between availability checks to determine if the PersistenceManager is available. In other words, this interval sets how often stores and loaders are polled via their `org.infinispan.persistence.spi.CacheWriter#isAvailable` or `org.infinispan.persistence.spi.CacheLoader#isAvailable` implementation. If a single store or loader is not available, an exception is thrown during cache operations.

cluster-loader

Defines a cluster cache loader.

Name	Type	Default	Description
remote-timeout	long	15000	The timeout when performing remote calls.

Name	Type	Default	Description
name	string		Unused XML attribute.
shared	boolean	false	Determines if a cache loader is shared between cache instances. Values are true / false (default). This property prevents duplicate writes of data to the cache loader by different cache instances. An example is where all cache instances in a cluster use the same JDBC settings for the same remote, shared database. If true, only the nodes where modifications originate write to the cache store. If false, each cache reacts to potential remote updates by storing the data to the cache store.
preload	boolean	false	Pre-loads data into memory from the cache loader when the cache starts. Values are true / false (default). This property is useful when data in the cache loader is required immediately after startup to prevent delays with cache operations when the data is loaded lazily. This property can provide a "warm cache" on startup but it impacts performance because it affects start time. Pre-loading data is done locally, so any data loaded is stored locally in the node only. Pre-loaded data is not replicated or distributed. Likewise, data is pre-loaded only up to the maximum configured number of entries in eviction.

property*

A cache loader property with name and value.

store

Defines a custom cache store.

Name	Type	Default	Description
class	string		Defines the class name of a cache store that implements either `CacheLoader`, `CacheWriter`, or both.

Name	Type	Default	Description
shared	boolean	false	This setting should be set to true when multiple cache instances share the same cache store (e.g., multiple nodes in a cluster using a JDBC-based CacheStore pointing to the same, shared database.) Setting this to true avoids multiple cache instances writing the same modification multiple times. If enabled, only the node where the modification originated will write to the cache store. If disabled, each individual cache reacts to a potential remote update by storing the data to the cache store.
transactional	boolean	false	This setting should be set to true when the underlying cache store supports transactions and it is desirable for the underlying store and the cache to remain synchronized. With this enabled any Exceptions thrown whilst writing to the underlying store will result in both the store's and cache's transactions rollingback.
preload	boolean	false	If true, when the cache starts, data stored in the cache store will be pre-loaded into memory. This is particularly useful when data in the cache store will be needed immediately after startup and you want to avoid cache operations being delayed as a result of loading this data lazily. Can be used to provide a 'warm-cache' on startup, however there is a performance penalty as startup time is affected by this process.
fetch-state	boolean	false	Fetches the persistent state of a cache when joining a cluster. Values are true / false (default). The purpose of this property is to retrieve the persistent state of a cache and apply it to the local cache store of a node when it joins a cluster. Fetching the persistent state does not apply if a cache store is shared because it accesses the same data as the other stores. This property can be `true` for one configured cache loader only. If more than one cache loader fetches the persistent state, a configuration exception is thrown when the cache service starts.
purge	boolean	false	Empties the specified cache loader at startup. Values are true / false (default). This property takes effect only if read-only is false.
read-only	boolean	false	Prevents data from being persisted to cache stores. Values are true / false (default). If true, cache stores load entries only. Any modifications to data in the cache do not apply to cache stores.
max-batch-size	int	100	Sets the maximum size of a batch to insert or delete from the cache store. If the value is less than one, no upper limit applies to the number of operations in a batch.
segmented	boolean	true	Configures cache stores to store data in hash space segments, with the "hash.numSegments" property defining the number of segments.

write-behind?

Configures cache stores as write-behind instead of write-through.

Name	Type	Default	Description
modification-queue-size	int	1024	Specifies the maximum number of entries in the asynchronous modification queue. When the queue is full, write-through mode is used until the queue can accept new entries.
thread-pool-size	int	1	Specifies the number of threads to apply modifications to the cache store.
fail-silently	boolean	false	Controls how asynchronous write operations take place when cache stores become unavailable. If "true", asynchronous write operations that fail are re-attempted with the number of times specified in the "connection-attempts" parameter. If all attempts fail, errors are ignored and write operations are not executed on the cache store. If "false", asynchronous write operations that fail are re-attempted when the underlying store becomes available. If the modification queue becomes full before the underlying store becomes available, an error is thrown on all future write operations to the store until the modification queue is flushed. The modification queue is not persisted. If the underlying store does not become available before the asynchronous store is stopped, queued modifications are lost.

property*

Defines a cache store property with name and value.

file-store

Defines a filesystem-based cache store.

Name	Type	Description
max-entries	int	Specifies the maximum number of entries that the file store can hold. To increase the speed of lookups, Single File cache stores index keys and their locations in the file. To avoid excessive memory usage, you can configure the maximum number of entries so that entries are removed permanently from both memory and the cache store when the maximum is exceeded. However, this can lead to data loss. You should only set a maximum number of entries if data can be recomputed or retrieved from an authoritative data store. By default, the value is `-1` which means that there is no maximum number of entries.
relative-to	string	Defines the root path on the file system where data is stored.
path	string	Specifies a filesystem directory for data. The value can be a relative or absolute path. Relative paths are created relative to the configured global persistent location. Absolute paths must be subdirectories of the global persistent location, otherwise an exception is thrown.

Name	Type	Default	Description
shared	boolean	false	This setting should be set to true when multiple cache instances share the same cache store (e.g., multiple nodes in a cluster using a JDBC-based CacheStore pointing to the same, shared database.) Setting this to true avoids multiple cache instances writing the same modification multiple times. If enabled, only the node where the modification originated will write to the cache store. If disabled, each individual cache reacts to a potential remote update by storing the data to the cache store.
transactional	boolean	false	This setting should be set to true when the underlying cache store supports transactions and it is desirable for the underlying store and the cache to remain synchronized. With this enabled any Exceptions thrown whilst writing to the underlying store will result in both the store's and cache's transactions rollingback.
preload	boolean	false	If true, when the cache starts, data stored in the cache store will be pre-loaded into memory. This is particularly useful when data in the cache store will be needed immediately after startup and you want to avoid cache operations being delayed as a result of loading this data lazily. Can be used to provide a 'warm-cache' on startup, however there is a performance penalty as startup time is affected by this process.
fetch-state	boolean	false	Fetches the persistent state of a cache when joining a cluster. Values are true / false (default). The purpose of this property is to retrieve the persistent state of a cache and apply it to the local cache store of a node when it joins a cluster. Fetching the persistent state does not apply if a cache store is shared because it accesses the same data as the other stores. This property can be `true` for one configured cache loader only. If more than one cache loader fetches the persistent state, a configuration exception is thrown when the cache service starts.
purge	boolean	false	Empties the specified cache loader at startup. Values are true / false (default). This property takes effect only if read-only is false.
read-only	boolean	false	Prevents data from being persisted to cache stores. Values are true / false (default). If true, cache stores load entries only. Any modifications to data in the cache do not apply to cache stores.
max-batch-size	int	100	Sets the maximum size of a batch to insert or delete from the cache store. If the value is less than one, no upper limit applies to the number of operations in a batch.
segmented	boolean	true	Configures cache stores to store data in hash space segments, with the "hash.numSegments" property defining the number of segments.

write-behind?

Configures cache stores as write-behind instead of write-through.

Name	Type	Default	Description
modification-queue-size	int	1024	Specifies the maximum number of entries in the asynchronous modification queue. When the queue is full, write-through mode is used until the queue can accept new entries.
thread-pool-size	int	1	Specifies the number of threads to apply modifications to the cache store.
fail-silently	boolean	false	Controls how asynchronous write operations take place when cache stores become unavailable. If "true", asynchronous write operations that fail are re-attempted with the number of times specified in the "connection-attempts" parameter. If all attempts fail, errors are ignored and write operations are not executed on the cache store. If "false", asynchronous write operations that fail are re-attempted when the underlying store becomes available. If the modification queue becomes full before the underlying store becomes available, an error is thrown on all future write operations to the store until the modification queue is flushed. The modification queue is not persisted. If the underlying store does not become available before the asynchronous store is stopped, queued modifications are lost.

property*

Defines a cache store property with name and value.

memory?

Controls how the entries are stored in memory

object

Store keys and values as instance variables in the Java heap. Instances of byte[] are wrapped to ensure equality. This is the default storage format.

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs when the number of entries exceeds the size.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

binary

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs either when the number of entries or amount of memory exceeds the size.

eviction

COUNT	Evict entries from the cache when the number of entries reaches the configured size.
MEMORY	Evict entries from the cache when the amount of memory in use reaches the configured size.

Specifies whether eviction is based on the number of entries or the amount of memory used.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

off-heap

Name

Type

Default

Description

size

long

-1

Defines the size of the data container as a long. Eviction occurs either when the number of entries or amount of memory exceeds the size.

eviction

COUNT	Evict entries from the cache when the number of entries reaches the configured size.
MEMORY	Evict entries from the cache when the amount of memory in use reaches the configured size.

Specifies whether eviction is based on the number of entries or the amount of memory used.

strategy

NONE	Do not evict entries. If you define a size for the data container, you should specify either the REMOVE or EXCEPTION exiction strategy.
MANUAL	Manually evict entries. This strategy is the same as NONE but does not log errors if you enable passivation without eviction.
REMOVE	Automatically evict older entries to make space for new entries. By default REMOVE is always used when you define a size for the data container unless you configure the EXCEPTION strategy.
EXCEPTION	Do not evict entries. If the data container reaches the maximum size, exceptions occur for requests to create new entries. You can use this eviction strategy only with transactional caches that use two phase commit.
UNORDERED	Deprecated. Activates REMOVE policy.
FIFO	Deprecated. Activates REMOVE policy.
LRU	Deprecated. Activates REMOVE policy.
LIRS	Deprecated. Activates REMOVE policy.

Specifies a strategy for evicting cache entries. Eviction always takes place when you define the size of the data container. If you specify a value for size, then you should configure a strategy.

indexing?

Defines indexing options for cache

Name

Type

Default

Description

index

NONE	Do not index data. This is the default.
LOCAL	Only index changes made locally, ignoring remote changes. This is useful if indexes are shared across a cluster to prevent redundant indexing of updates.
ALL	Index all data
PRIMARY_OWNER	Only index changes on the primary owner, regardless of it's local or remote.

NONE

The indexing mode of the cache. Defaults to NONE.

auto-config

boolean

false

Whether or not to apply automatic index configuration based on cache type

key-transformers?

Defines the Transformers used to stringify keys for indexing with Lucene

key-transformer*

Defines the Transformer to use for the specified key class

Name	Type	Default	Description
key	string
transformer	string

indexed-entities?

Defines the indexed entity classes

indexed-entity*

Indexed entity class name

property*

Property to pass on to the indexing system

custom-interceptors?

Deprecated since 10.0, will be removed without a replacement. Configures custom interceptors to be added to the cache.

interceptor*

Deprecated since 10.0, will be removed without a replacement.

Name	Type	Description
after	string	Dictates that the custom interceptor appears immediately after the specified interceptor. If the specified interceptor is not found in the interceptor chain, a ConfigurationException will be thrown when the cache starts.
before	string	Dictates that the custom interceptor appears immediately before the specified interceptor. If the specified interceptor is not found in the interceptor chain, a ConfigurationException will be thrown when the cache starts.
class	string	A fully qualified class name of the new custom interceptor to add to the configuration.
index	int	Specifies a position in the interceptor chain to place the new interceptor. The index starts at 0 and goes up to the number of interceptors in a given configuration. A ConfigurationException is thrown if the index is less than 0 or greater than the maximum number of interceptors in the chain.
position	string	Specifies a position where to place the new interceptor. Allowed values are FIRST, LAST, and OTHER_THAN_FIRST_OR_LAST

property?

security?

Configures cache-level security.

authorization?

Configures authorization for this cache.

Name	Type	Default	Description
enabled	boolean	false	Enables authorization checks for this cache. Defaults to true if the authorization element is present.
roles			Sets the valid roles required to access this cache.