Red Hat JBoss Developer Studio 10.2

Getting Started with JBoss Developer Studio Tools

Introduction to Using Red Hat JBoss Developer Studio Tools

Misha Husnain Ali

<mhusnain@redhat.com>

Supriya Bharadwaj

<sbharadw@redhat.com>

Red Hat Developer Group Documentation Team <devtools-docs@redhat.com>

Copyright © 2017 Red Hat, Inc.

The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.

Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.

Red Hat, Red Hat Enterprise Linux, the Shadowman logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.

Linux® is the registered trademark of Linus Torvalds in the United States and other countries.

Java® is a registered trademark of Oracle and/or its affiliates.

XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.

MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.

Node.js® is an official trademark of Joyent. Red Hat Software Collections is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.

The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.

All other trademarks are the property of their respective owners.

Abstract

This compilation of topics contains information on how to start using Red Hat JBoss Developer Studio Tools for efficient development.

Chapter 1. Setting Up and Managing a Repository for Your Projects

Using Git with Red Hat JBoss Developer Studio

The IDE includes the Git Perspective to allow developers to create, add, and manage their Git repositories quickly and easily with a graphical interface. This article introduces the basic workflow of a Git project and how to accomplish the most common Git-related tasks via the Git perspective. Common Git-based tasks include:

the section called “Setting Up the Git Perspective”

the section called “Setting up a Repository in the Git Perspective”

the section called “Adding a Remote for the Repository”

the section called “Creating and Working With a New Branch”, including:

the section called “Creating a New Branch”

the section called “Working in the New Branch”

the section called “Updating the Branch Before Implementing Changes”

the section called “Commiting and Merging Changes”

the section called “Committing and Pushing the Changes”

the section called “Committing Without Pushing the Changes”

Setting Up the Git Perspective

Use the following instructions to locate the Git Perspective in the IDE:

In the menu bar at the top of the page, click Window → Perspective → Open Perspective → Other.

From the list of available perspectives, select Git and click OK.

Result: The Git Repositories view appears on the upper left side of the window.

Setting up a Repository in the Git Perspective

The first step to using the Git Perspective in the IDE is to set up a Git repository. There are three ways to set up a Git repository in the Git Perspective:

the section called “Creating a New Git Repository”

the section called “Cloning an Existing Git Repository”

the section called “Adding an Existing Local Git Repository”

The most common use case for developers is to clone an existing repository, or import an existing local clone of a repository into the IDE. However, the first option is an easy way to create a full repository (bare or normal) from scratch.

Creating a New Git Repository

If a repository is not already created and available, use the following steps to create a new repository:

Click the Create a new Git Repository and add it to this view button.

Figure 1.1. Click the Create a New Git Repository Button

In the dialog box:

Ensure that the automatically populated default value for the Repository Directory field is correct.

Optionally, if required, check the Create a bare repository to create a new bare repository. For details about bare repositories and how they differ from a normal repository, see the Did You Know? section.

Figure 1.2. Create a New Git Repository

Result: A new git repository is created on your local machine and is listed in the Git Repositories view.

Cloning an Existing Git Repository

If your repository already exists online (for example, in GitHub), use the following steps to create a local clone:

Ensure that you have forked the repository online. This option is available in the repository host’s website.

Click the Clone a Git Repository and add the clone to this view button.

Figure 1.3. Click the Clone a Git Repository Button

Enter the details of the source repository as follows:

Add the URI for the repository’s online source. This automatically populates the Host and Repository Path fields.

Add your username and password for the source repository under the Authentication details.

Click Next to continue.

Figure 1.4. Enter the Source Repository Details

Customize the local version of your Git repository as follows:

Confirm that the automatically populated information for the destination Directory and Initial Branch are correctly populated.

Optionally, set a non-default name for the Remote name field.

Optionally, select the Add project to working sets option and use the drop down menu and the Select button to select the appropriate working sets for this repository.

Figure 1.5. Customize the Local Version of the Git Repository

Click Finish to conclude cloning an existing Git repository.

Result: The new cloned repository is listed in the Git Repositories view.

Adding an Existing Local Git Repository

If you have already cloned a Git repository locally, the following instructions are necessary to add your Git repository to the IDE. If you have not yet cloned your repository, follow the instructions in the prerequisites section below:

Prerequisites

Ensure that you have forked the repository online.

In the command line on your local system, navigate to the location where you want to store the local copy of the repository and enter the following command to clone the repository:

$ git clone ${repo_URL}

Adding an Existing Git Repository

Use the following instructions to add your existing local Git Repository to JBoss Developer Studio’s Git Perspective:

Click the Add an existing local Git Repository to this view button.

Figure 1.6. Click the Add an Existing Local Git Repository Button

Select the local Git Repository as follows:

Click Browse to navigate to the local directory that contains the Git repository.

Optionally, select the Look for nested repositories checkbox to search for nested repositories.

In the Search results box, ensure that the appropriate .git file is selected.

Figure 1.7. Find and Add Local Repository

Click Finish.

Result: The local repository now appears in the Git Repositories view.

Adding a Remote for the Repository

After setting up your repository for the first time, set up a remote for repository. This is a one-time set up step for newly created or added repository.

In the Git Repositories view, expand the target repository.

From the expanded options, right-click Remotes and then Create Remotes.

In the New Remote dialog box:

Add a name in the Remote name field.

Ensure that the Configure Push radio button is selected.

Click OK to continue.

In the Configure Push dialog box:

Click Change to view the Select a URI dialog box.

Add the URI to your repository in the URI field. This automatically populates the Host and Repository path fields.

Add your repository username and password in the Authentication section of the dialog box and click Finish to continue.

Click Save to save your push configuration settings.

Result: Expand the Remotes folder in the repository view to see the newly added remote.

Creating and Working With a New Branch

This section provides instructions for creating a new branch and common tasks with the new branch, such as:

the section called “Creating a New Branch”

the section called “Working in the New Branch”

the section called “Updating the Branch Before Implementing Changes”

Creating a New Branch

If your repository is already set up in the IDE, create a new branch to make changes to the files.

In the Git Repositories view:

Expand the name of your Git Repository.

Click Branches to expand the branch view.

Click Remote Tracking to view all remote branches for the repository.

A branch displays with a name that begins with origin/master. Right-click this branch and select Create Branch from the displayed options.

Figure 1.8. Create a Branch from Origin/Master

Add the required details about the new branch:

Add the desired new branch name in the Branch name field.

Ensure that the Configure upstream for push and pull checkbox is selected.

In the When doing a pull options, select the option that suits your requirement. The Merge upstream commits into local branch option creates commits when a merge occurs. These commits are included in the subsequent pull request. The Rebase commits of a local branch onto upstream option performs a rebase before adding your changes, which prevents additional commits in your pull request.

Ensure that the Checkout new branch check box is selected.

Figure 1.9. Add Details for a New Branch

Click Finish to create the new branch.

Result: The new branch appears under Repository_Name → Branches → Local.

Working in the New Branch

After creating a new branch, you can implement changes in the new branch as follows:

Expand Repository_Name → Branches → Local and find the new branch where changes are to be implemented.

Confirm that the target branch is checked out. The currently checked-out branch displays a small black check mark:

Figure 1.10. An Example of a Checked-out Branch

Right-click on the checked-out branch name and mouse-over the Show In option in the menu and then click Terminal in the submenu.

Figure 1.11. The Show Branch in Terminal Option

On the right view, a Terminal tab appears. In the same row, click the icon that resembles a computer monitor to view the command line prompt in this view.

Figure 1.12. The Open a Terminal Button

In the Launch Terminal dialog box:

Ensure that Local Terminal is selected in the Choose a Terminal drop-down box.

Select Default (ISO-8859-1) in the Encoding box.

Click OK. Note that as a default, the terminal window is at the /home/YourCurrentUser/ directory.

Result: The Terminal tab now displays a command line terminal. Use the terminal view to make the required changes to your checked-out files.

Updating the Branch Before Implementing Changes

When working locally on a branch, it is better to ensure the local branch is up to date before creating a pull request (PR). As an example, if someone else has checked out the same repository and created a new branch, made changes, and merged the changes, use the following procedure to update your repository and branch before committing your own changes.

In the example below, a new branch called TrackingID-1234 is created using the IDE. Assuming that someone else is working on the same repository and has created a new branch called NEWBRANCH, made changes to it, and then merged the changes back into the repository. The local branch (TrackingID-1234) is now out of date because it does not include the changes from NEWBRANCH. Use the following instructions to update the branch:

Right-click the name of the repository to update.

From the menu that displays, click Pull.

A status menu appears that displays the progress of the pull request.

When the pull completes, a Pull Result for Repository_Name menu appears that lists the results of the fetch and update operations.

Click OK to conclude the operation.

Result: The repository now contains the most updated version of the contents.

Commiting and Merging Changes

After all required changes are complete, commit the changes and then create a Pull Request. Pull Requests are then evaluated by the repository owner and either merged into the repository or rejected.

Ensure that the black and white tick mark that indicates the current branch appears at the correct working branch in the Local folder of your repository view.

Right-click the name of the repository. In the displayed menu, click the Commit option.

In the Commit Changes dialog box:

Add a commit message describing the changes in the Commit message text box.

Confirm that the automatically populated Author and Committer fields contain the correct name and email address.

In the Files area, all files added using the git add command display in the box. Select the checkbox next to each file to include it in the commit. See the Did You Know? section to learn about only including some of the changed files in a commit.

Figure 1.13. Add details to the Commit Changes Dialog Box

Click Commit to create a new commit (without creating a Pull Request) or click Commit and Push to commit the changes and create a Pull Request at the same time.

Committing Without Pushing the Changes

If you selected Commit in the previous procedure to commit changes but not push them, use the following instructions:

When the operation completes, the repository is now ahead by one commit. This is represented with an arrow and the number one:

Figure 1.14. Git Repository Status

When you are ready to create a Pull Request, right click the current branch name and click Push Branch.

An automatically populated Push Branch Branch_Name dialog box appears. Confirm that the settings are correct. The settings selected when creating this branch are used for this step. Click Next to continue.

A dialog box appears requesting the repository access username and password.

A Push Confirmation dialog box appears. Click Finish to create the Pull Request. If requested, supply the username and password for the repository once again.

When the operation completes, a Push summary dialog box appears. Click OK to dismiss this dialog box.

Result: The included changes are now committed and a Pull Request is generated for the repository owner to review.

Committing and Pushing the Changes

If you selected Commit and Push in the previous procedure, use the following instructions:

A dialog box appears requesting the repository access username and password.

When the operation completes, the repository is now ahead by one commit. This is represented with an arrow and the number one:

Figure 1.15. Git Repository Status

After the Pull Request is evaluated and merged, right-click the repository and click Pull to manually update the repository.

Result: A Pull Request is generating and ready for the repository owner to review.

Did You Know?

Bare repositories are recommended for central repositories, but not for development environments. Bare repositories differ from normal repositories because they do not contain a working or checked out copy of any source files. This prevents editing files and committing changes in the repository. Additionally, they store the git revision history for your repository in the repository’s root folder instead of in a .git sub-folder.

When selecting the files to commit in the Commit Changes, you can select only the files you want included in the commit using the checkboxes next to each file name. The unchecked files are not included in the commit and no extra actions are required to reconcile the uncommitted files when committing and creating a Pull Request.

If you need to add a change ID to each commit message, in the Comming Changes dialog box, click the rightmost icon at the top right corner to add a change ID to the commit message.

Configuring Maven Basics

In the context of application development, Maven provides a standardized build system for projects. One of the main benefits of using Maven with your project is that it facilitates fetching dependencies from one or more repositories. This article serves as an introduction to using Maven with the IDE and contains instructions for the following tasks:

the section called “Creating a New Maven Project”

the section called “Creating a New Maven Module”

the section called “Adding Maven Support to an Existing Non-Maven Project”

Root Maven projects can serve as aggregators for multiple Maven modules, also known as sub-projects. For each module that is part of a maven project, a <module> entry is added to the project’s pom.xml file. A pom.xml that contains <module> entries is often referred to as an aggregator pom.

When modules are included into a project it is possible to execute Maven goals across all of the modules by a single command issued from the parent project directory.

Note

Note that the provided instructions pertain to the creation of a parent+module project structure. If you prefer to create just a simple project, simply start with an archetype or don’t use the pom packaging in step 2.a.

Creating a New Maven Project

Use the following instructions to create the parent project of a multi-module Maven project. The instructions provided ensure that the packaging option is set to pom, which is a requirement for multi-module Maven projects. Alternately, to create a standalone Maven project instead, set the packaging option to an option other than pom.

Create a new project:

In the workspace, navigate to File → New → Other.

Type maven in the Filter field and select Maven Project.

Click Next to continue.

Enter the initial project details:

Check the Create a simple project (skip archetype selection) check box. If this check box is selected, the Select an Archetype step of the wizard is skipped and the project type is set to pom, which is required to create a Maven Module based on this Maven project. Alternately, to create a standalone project, uncheck the Create a simple project (skip archetype selection) check box and follow the instructions in the wizard.

Ensure that the Use default Workspace location check box is not checked and specify a non-default location for your workspace files using the Browse button. Using a non-default workspace location is recommended because this allows other tools to access the workspace location easily.

The following optional steps are available for further configuration, if required:

(Optional) Check the Add project(s) to working set check box to add the newly created projects to a working set.

(Optional) Click Advanced to view additional optional advanced configuration for the new Maven project, such as:

Resolve Workspace projects: dependencies opened as workspace projects will be resolved without having to install them to your local Maven repository first. This way, any changes made to one of these dependencies will have an immediate effect on other projects consuming it (compilation, refactoring, etc.). When Resolve Workspace projects is disabled, dependencies existing in the workspace must be installed to your local Maven repository after any change (by running mvn install), in order to see effects in projects consuming them.

Profiles: select a set of Maven profiles to activate or deactivate in the workspace. Profiles are defined in the project pom.xml, or inherited from a parent pom.xml, or defined in the relevant settings.xml.

Name templates: allows you to disambiguate projects names in the workspace by prepending or appending the group ID or SCM branch names to the default artifact ID.

Figure 1.16. Create a New Maven Project

When the configuration is complete, click Next to continue.

Configure the project details:

Enter the desired group ID, which is similar to an organization namespace (for example, com.company.businessunit.project), in the Group Id field.

Enter the desired artifact ID value, which is the name for your project, in the Artifact Id field. This value must not include any spaces and the only special characters allowed are periods ('.'), underscores ('_'), and dashes ('-').

Set the Version field’s value to 0.0.1-SNAPSHOT or a similar value. For details about the appropriate version build numbers, see Project Versions

Set the value of the Packaging field to pom.

(Optional) Add a name for your project in the Name field.

(Optional) Add a description for your project in the Description field.

Figure 1.17. Configure Project Details

Click Finish to conclude the new Maven project creation wizard.

Result: Your new Maven project is created and appears in the Project Explorer view.

Creating a New Maven Module

Each Maven project with a packaging pom can include multiple Maven modules. Follow the instructions to create your first Maven module:

Prerequisites

You must have an existing Maven project available with the packaging type pom. See Create a New Maven Project for instructions to create a new Maven project.

Creating a New Maven Module

Create a new Maven module as follows:

In the Project Explorer view, right-click the recently created pom project and select New → Project.

From the wizard selection screen, expand Maven and select Maven Module.

Click Next > to continue.

Enter the initial module details:

Ensure that the Create a simple project (skip archetype selection) check box is not checked. If this check box is selected, the Select an Archetype step of the wizard is skipped.

Enter the desired module name in the Module Name field. This value corresponds to the Maven project’s Project ID.

Use the Browse button to locate the desired parent project and select it.

The following optional steps are available for further configuration, if required:

(Optional) Check the Add project(s) to working set check box to add the newly created projects to a working set.

(Optional) Click Advanced to view additional optional advanced configuration for the new Maven project, such as:

Resolve Workspace projects: dependencies opened as workspace projects will be resolved without having to install them to your local Maven repository first. This way, any changes made to one of these dependencies will have an immediate effect on other projects consuming it (compilation, refactoring, etc.). When Resolve Workspace projects is disabled, dependencies existing in the workspace must be installed to your local Maven repository after any change (by running mvn install), in order to see effects in projects consuming them.

Profiles: select a set of Maven profiles to activate or deactivate in the workspace. Profiles are defined in the project pom.xml, or inherited from a parent pom.xml, or defined in the relevant settings.xml.

Name templates: allows you to disambiguate projects names in the workspace by prepending or appending the group ID or SCM branch names to the default artifact ID.

Figure 1.18. Set the Module Name and Parent

When the configuration is complete, click Next to continue.

Enter the module archetype information:

Ensure that the Show the last version of Archetype only check box is checked. This ensures that only the latest version of each archetype displays.

Select an archetype based on the purpose of the project you are creating. Use the keyword maven-archetype-quickstart in the Filter field to locate a sample Maven project archetype.

Figure 1.19. Select a Module Archetype

Click Next to continue.

Enter the module details:

Add the same group ID value that was used for the Maven project to the Group Id field.

Add the desired version number in the Version field. For details about the appropriate version build numbers, see Project Versions

The Artefact Id and Package fields are automatically populated based on the parent project details.

Figure 1.20. Configure the Module Archetype Parameters

Click Finish to conclude setting up the Maven module.

(Optional) To change the settings for the created Maven module, expand the module name in the Project Explorer view and double click pom.xml from the expanded list. An Overview tab appears and all settings can be changed from this tab.

Figure 1.21. Change the Module Settings from the Overview View

Result: Your new Maven module is created and appears in the Project Explorer view. Additionally, a hierarchical view of the nested projects is now available in the Project Explorer view as well (see Nested/Hierarchical view of projects).

Adding Maven Support to an Existing Non-Maven Project

The previous tasks contain instructions to create a new Maven project and Maven module. However, for an existing application that was not created with Maven support, use the following instructions to add Maven support to the non-Maven project:

Right-click the project name in the Project Explorer view.

From the displayed options, click Configure.

From the displayed sub-menu, click Convert to Maven Project.

Configure details for the new pom file:

The basic fields for the new pom file are prepopulated based on the project details. If required, edit the existing values.

(Optional) Add a name for the new project in the Name field.

(Optional) Add a brief description for the project in the Description field.

Figure 1.22. Create a New Pom Descriptor

Click Finish to finalize the pom information.

If the project references java dependencies, a wizard appears displaying all these dependencies and a green check mark when each dependency is identified. Learn more about dependency identification in the Did You Know section.

Check the Delete original references from project check box to avoid retaining duplicate or stale dependencies in your project.

Figure 1.23. Identify Maven Dependencies

Click Finish when all dependencies are converted.

Result: The existing project is now configured for Maven support.

Did You Know?

The wizard used to convert a non-Maven project to a Maven project attempts to identify all the project’s classpath entries and their equivalent Maven dependencies. From the list of identified dependencies, users can select which ones will be added to the generated Maven pom.xml file. When identifying dependencies, one of several strategies may be used:

Checking if the jar contains the relevant maven metadata.

Identify the dependency using the Nexus indexer.

Identify the dependency using the JBoss Nexus instance REST API (if we are online) via a SHA1 search.

Identify the dependency using the search.maven.org REST API (if we are online) via a SHA1 search.

All unchecked dependencies will be ignored and are not added to the generated pom.xml. However, some of these can be added as transitive dependencies to your project. For instance, if you add jsp-api but remove servlet-api, the latter appears in the project classpath, as it is a dependency of jsp-api.

You can double-click on a dependency from a list (or click the Edit button) to edit its Maven coordinates or scope. Selecting several dependencies (ctrl+click) and clicking the Edit button allows batch editing of their scope.

Troubleshooting

Error Message: Unidentifiable Dependency in the Maven Dependency column.

Figure 1.24. Unidentifiable Dependency

Issue: Either:

the jar file is corrupted/invalid.

the jar file is valid but does not contain any metadata used for identification.

Resolution:

Make sure that jar exists as a Maven artifact. If needed, you can install it to your local repository and then Click on the Identify dependencies button.

Double click on the dependency, or click on the Edit…​ button and set the expected maven coordinates.

Error Message: Some selected dependencies can not be resolved. Click here to configure repositories in your settings.xml.

Figure 1.25. Dependencies Can Not Be Resolved Error

Issue:: This error displays when a dependency can be identified (that is, whether it contains the pom properties or other metadata) but the dependency is not available in any repository defined in your settings.xml.

Resolution: Click the here link in the error message and compare the old and new settings for the dependency and add a new and correct repository. Users may choose to use one of the predefined repositories from Red Hat.

Chapter 2. Developing First Applications with JBoss Developer Studio Tools

Configuring JBoss Developer Studio for use with JBoss EAP and JBoss Web Framework Kit

This article provides details for new and existing users who need to configure a fresh install of the IDE or upgrade the versions of Red Hat JBoss Enterprise Application Platform or JBoss Web Framework Kit in use.

The IDE supports application development and deployment with JBoss EAP and JBoss Web Framework Kit only after you configure the IDE for use with JBoss EAP and JBoss Web Framework Kit. This configuration is essential for using the enterprise versions of the example Maven projects provided in JBoss Central. These projects are intended for deployment to JBoss EAP and necessitate IDE access to the JBoss EAP and JBoss Web Framework Kit Maven repositories.

Instructions are provided for the following tasks:

Setting up JBoss EAP for use in the IDE in one of three different ways

Configuring Maven for JBoss EAP and JBoss Web Framework Kit Maven repositories

Setting Up JBoss EAP

To set up JBoss EAP for use in the IDE, you must direct the IDE to the local or remote runtime servers. This establishes a communication channel between the IDE and the JBoss EAP server for efficient deployment and server management workflows. Depending on your circumstance, you can set up the JBoss EAP server in one of three ways:

If you are installing a new instance of the IDE, you can use the combined installer to download, install, and set up the IDE and JBoss EAP.

If you already have the IDE installed but not JBoss EAP, you can download, install, and set up JBoss EAP from within the IDE.

If the IDE and JBoss EAP are already installed, you can use runtime detection to set up JBoss EAP from within the IDE.

Downloading, Installing and Setting Up the IDE and JBoss EAP using a Single Installer

If you are installing a new instance of the IDE, you can use the combined installer to download, install, and set up the IDE and JBoss EAP. A specific JBoss EAP version is packaged in the installer; for details of the JBoss EAP version see https://access.redhat.com/site/articles/427493.

Note: If you want to install a different version of JBoss EAP, you can either download it from within the IDE (see download, install, and set up JBoss EAP from within the IDE) or install it separately and then follow the instructions in C,use runtime detection to set up JBoss EAP from within the IDE.

To install the IDE and JBoss EAP using a single installer:

Log onto the Red Hat Customer Portal at https://access.redhat.com.

Locate the downloads for versions of the IDE greater than or equal to 9.x.

Download the installer .jar file.

On the command line, navigate to the downloaded installer .jar file and enter: java -jar jboss-devstudio-version-installer-eap.jar where version is the version of the .jar file.

In the Red Hat JBoss Developer Studio wizard, click Next.

In the End User License Agreement window, read the terms of the End User License Agreement, click I accept the terms of this license agreement, and then click Next.

In the Select Target Folder window, click Browse to select the location to install and click Next.

When you are prompted about the specified location being created (or overwritten), review the message and, if satisfied, click OK (or Yes).

In the Select Java VM window, select the appropriate option for your Java VM preference and then click Next:

To select the default Java VM that is listed in the disabled field below, click Default Java VM.

To select a different Java VM, click Specific Java VM and then click Browse to locate the Java VM.

In the Select Platforms and Servers window, with reference to installing JBoss EAP, click Yes, and have it ready for use in JBoss Developer Studio and click Next.

Figure 2.1. Select Platforms and Servers Window Confirming Installation

Review the information in the Summary Information window and click Next.

The Installation window opens showing the installation progress. Once the installation is complete click Next.

In the Setup Shortcuts window, click the desired shortcut options and click Next.

In the Finish window, click Done to complete the installation. The IDE starts.

In the Workspace Launcher window, in the Workspace field type the path for a new or existing workspace or click Browse to navigate to a workspace and click OK.

When prompted to allow Red Hat to receive anonymous usage statistics, select the appropriate option.

Click Get started with JBoss Central to begin working.

Result: The server is listed in the Servers view in stopped mode.

Downloading, Installing and Setting Up JBoss EAP from within the IDE

If the IDE is already installed, you can download, install, and set up JBoss EAP from within the IDE. With this option, you can choose from a range of supported JBoss EAP versions; for details of supported JBoss EAP versions see https://access.redhat.com/site/articles/427493.

To download, install and set up JBoss EAP from within the IDE:

Start the IDE.

Click Window → Preferences, expand JBoss Tools, and then click JBoss Runtime Detection.

In the Paths pane, click Download.

In the Download Runtimes window, from the Download Runtimes table select the JBoss EAP version that you want to download and click Next.

Note: For JBoss EAP 6.1.x and later, continue to follow the steps given here. For JBoss EAP 6.0.x and earlier, follow the on-screen instructions for downloading JBoss EAP from the Red Hat Customer Portal and after JBoss EAP is installed continue to use runtime detection to set up JBoss EAP from within the IDE.

Figure 2.2. Download Runtimes Window Listing Available JBoss EAP Versions

In the JBoss.org Credentials window, in the Domain field, type jboss.org and then click Add next to the Username field. Note that if you do not have a JBoss.org account, you must click the link to sign up.

In the Add a Credential window, Username field, type your username and in the Password field, type the password and click OK.

In the Download Runtimes window, click Next.

In the JBoss.org Terms and Conditions window, read the terms and conditions, from the Please choose the country of use list, select your country of use, and then click Accept Now. If you have previously accepted the terms and conditions in the IDE or through the jboss.org website, this window is skipped.

Click Next.

Read the General Public License, click I accept the terms of the license agreement, and then click Next.

For the Install Folder field, click Browse and choose a location in which to install JBoss EAP and click Finish.

Click Apply and click OK to close the Preferences window. The download and installation starts and may take some time to complete.

Result: The server is listed in the Servers view in stopped mode.

Using Runtime Detection to Set Up JBoss EAP from within the IDE

If the IDE and JBoss EAP are already installed, you can use runtime detection to set up JBoss EAP from within the IDE. The runtime detection feature automatically identifies the JBoss EAP instance installed on your local system and generates a corresponding default server setup for use in the IDE. This feature makes getting started with a default JBoss EAP server very quick.

Note: Specific JBoss EAP versions are supported by each IDE release; for details of supported JBoss EAP versions see https://access.redhat.com/site/articles/427493.

To use runtime detection to set up JBoss EAP for use in the IDE:

Start the IDE.

Click Window → Preferences, expand JBoss Tools, and then select JBoss Runtime Detection.

Click Add.

Navigate to path/to/jboss-eap and click OK. JBoss Server Tools recursively scans the path searching for installed servers and displays a list of those it finds.

Ensure the jboss-eap-version check box is selected, where version denotes the JBoss EAP version, and click OK.

Figure 2.3. Selecting a Runtime

Click Apply and click OK to close the Preferences window.

Result: The server is listed in the Servers view in stopped mode.

Configuring Maven for JBoss EAP and JBoss Web Framework Kit Maven Repositories

To configure Maven to use the JBoss EAP and JBoss Web Framework Kit Maven repositories when working inside the IDE, you must ensure that the IDE knows the location of your Maven configuration settings.xml file and that the necessary profiles for the JBoss EAP and JBoss Web Framework Kit Maven repositories are contained in that file. This ensures that Maven knows where to search for project dependencies when it is called to build Maven projects from within the IDE.

Specifying Maven settings.xml File Location

If you have multiple Maven settings.xml files or you are using a shared settings.xml file, then this file may not be in the default location expected by the IDE. In this case, you must inform the IDE of the file location.

To specify the Maven settings.xml file location:

Start the IDE.

Click Window → Preferences, expand Maven, and then click User Settings.

For the User Settings field, click Browse and locate the settings.xml file.

Click Update Settings.

Click Apply and then click OK.

Using JBoss EAP and JBoss Web Framework Kit Maven Repositories

You can either download the JBoss EAP and JBoss Web Framework Kit Maven repositories from the Red Hat Customer Portal or use the online Maven repository located at https://maven.repository.redhat.com/ga.

Using the Offline Maven Repositories

If you have not previously used these versions of JBoss EAP and JBoss Web Framework Kit, you must configure your Maven settings.xml file to use the associated product Maven repositories. You can manually edit your settings.xml file in a text editor or use the JBoss Developer Studio Maven integration feature to automatically detect the JBoss repositories and appropriately edit your settings.xml file.

Note: The JBoss EAP and JBoss Web Framework Kit Maven repositories must be already obtained from the Red Hat Customer Portal and located on a system that you can access.

To specify the JBoss EAP and JBoss Web Framework Kit Maven repositories locations using the IDE:

Start the IDE.

Click Window → Preferences, expand JBoss Tools, and then click JBoss Maven Integration.

Click Configure Maven Repositories.

Click Add Repository.

Click Recognize JBoss Maven Enterprise Repositories.

Navigate to path/to/jboss-eap-maven-repository and click OK. JBoss Maven Tools recursively scans the path searching for a Maven repository.

Modify the information in the ID and Name fields as desired, ensure the Active by default check box is selected, and then click OK.

Figure 2.4. Details of the Selected Maven Repository

Click Add Repository.

Click Recognize JBoss Maven Enterprise Repositories.

Navigate to path/to/jboss-wfk-maven-repository and click OK. JBoss Maven Tools recursively scans the path searching for a Maven repository.

Modify the information in the ID and Name fields as desired, ensure the Active by default check box is selected, and then click OK.

Click Finish and at the prompt asking if you are sure you want to update the Maven configuration file click Yes. If the specified configuration file does not exist, JBoss Maven Tools creates it.

Click Apply and click OK to close the Preferences window.

Using the Online Maven Repositories

Adding the online repository to the IDE, adds https://maven.repository.redhat.com/ga to your settings.xml , which takes care of all the dependencies.

To use the online Maven repositories:

Start the IDE.

Click Window → Preferences, expand JBoss Tools, and then click JBoss Maven Integration.

Click Configure Maven Repositories.

Click Add Repository.

In the Profile ID drop-down list, select redhat-ga-repository.

Figure 2.5. Add a Maven Repository

Click OK.

In the Configure Maven Repositories window, click Finish.

Click Apply and then click OK to close the Preferences window.

Creating and Importing Node.js Applications

Node.js is an event-based, asynchronous I/O framework and is used to develop applications that run JavaScript on the client and server side. This allows the application to re-use parts of the code and to avoid switching contexts. Node.js is commonly used to create applications such as static file servers, messaging middleware, HTML5 game servers, web application framework, and others.

JBoss Developer Studio supports node.js application development using the npm package installer and offers a built-in debugging tool to identify and fix issues with applications. In the subsequent sections, instructions are available for the following tasks:

the section called “Setting Up Prerequisites for Node.js Development”

the section called “Creating a new JavaScript Application”

the section called “Importing an Existing JavaScript Project”

the section called “Debugging Node.js Applications”

Setting Up Prerequisites for Node.js Development

Ensure that the following prerequisites are met to start developing node.js applications in JBoss Developer Studio:

Install npm. On Red Hat Enterprise Linux and Fedora, use the sudo dnf install npm command. See the npm documentation (https://docs.npmjs.com/getting-started/installing-node) for installation information about other operating systems.

Install JBoss Developer Studio.

Result: You are now ready to start developing Node.js applications with JBoss Developer Studio.

Creating a new JavaScript Application

To create a new JavaScript project and application in JBoss Developer Studio:

To create a new JavaScript project:

Click File → New → Other and type JavaScript in the search text box.

Select JavaScript Project and click Next.

In the Project Name field, add a name for your new project.

Ensure that the rest of the fields, which are set to the default settings, are as required, and then click Finish to create the new project.

If asked to view the JavaScript perspective, click Yes. Your new project is listed in the Project Explorer view.

To interactively create a package.json file:

Click File → New → Other and then type npm in the search box.

From the search results, click npm Init.

Set the Base directory to your JavaScript project folder in your JBoss Developer Studio workspace.

Optionally, clear the Use default configuration check box to supply non-default values for these fields.

Click Finish to continue with the default values for the package.json file or to continue after changing the default values.

Figure 2.6. Generate a New package.json File

The new package.json file is generated and displayed for editing. If required, manually edit the file in the displayed pane and save the changes.

Figure 2.7. Manually Edit the Generated package.json File

Manually edit the package.json file to add dependencies. Dependencies are modules which provide extended functionality, such as libraries and frameworks. See the following screen capture for an example of the required format for dependencies and developer dependencies.

Figure 2.8. Adding Dependencies to the package.json File

For further details about dependencies, see the NPM documentation: https://docs.npmjs.com/files/package.json#dependencies

Create a new JavaScript file with the required business logic:

In the Project Explorer view, right-click the name of your project, and select New → File.

In the dialog box, add a name for the new file, for example index.js, and click Finish to create the new file.

The new file displays for editing in a new tab. Add the required business logic to the your JavaScript files and save the changes.

Run the project files by right-clicking the index.js file in your project and select Run As → Node.js Application. The Console view appears and displays details about the application as it runs, or errors if it is unable to run the application.

Result: You have created a new JavaScript project and application.

Importing an Existing JavaScript Project

You can import an existing JavaScript project directly into JBoss Developer Studio and then make changes and run the project as follows:

Import an existing project into JBoss Developer Studio:

Click File → Import.

In the Import dialog box, expand the General option.

Click Existing Projects into Workspace and then click Next.

In the Import Projects dialog box:

Click either the Select root directory or Select archive file options based on your project format.

Click Browse to add the path to the project root directory or archive file.

In the Projects box, select one or more projects to import into the workspace.

If required, click the Search for nested projects option to locate nested projects in the root directory or archive file.

Click the Copy projects into workspace option to save a copy of the imported project in the workspace directory specified for JBoss Developer Studio.

If required, select the Add project to working sets checkbox and add the details for a new or existing working set.

Click Finish to add the project to the workspace. The Project Explorer view now contains your imported project.

If required, expand the project in the Project Explorer view and either double-click the project files to edit them, or right-click and select New → File to add a new JavaScript file for your project.

Run the project files by right-clicking the index.js file in your project and click Run As → Node.js Application. The Console view appears and displays details about the application as it runs, or errors if it is unable to run the application.

Result: You have imported an existing JavaScript project into JBoss Developer Studio.

Debugging Node.js Applications

After either creating a new Node.js project or importing an existing one and then running the project, some errors may appear. JBoss Developer Studio includes a debugger to help identify and resolve these issues. To use the debugging feature:

Start the debugger for your project:

In the Project Explorer view, expand your project.

Right-click the index.js file for your project and click Debug As → Node.js Project.

Select the Remember my decision check box in the dialog box to apply your selection to subsequent perspective shifts and then click Yes or No to continue.

Review the elements of your project’s JavaScript files to locate errors in one of two ways:

Expand any variable listed in the Variables tab to view additional objects and edit the details for each item.

Hover the mouse cursor over any variables in the index.js tab to view and edit its property details.

Make changes to the files to address the errors:

Edit the index.js file in the appropriate view.

Save the changes. The Console view runs the updated file and displays changes.

After debugging the errors, use the Resume, Suspend, and Terminate buttons ( nodejs resume pause ) as follows to test your changes:

The Resume button (green triangle) continues running the project files.

The Suspend button (two yellow rectangles) temporarily stops running the project files to allow users to make changes.

The Terminate button (red square) ends the running of the project files.

Repeat steps 4 through 6 as necessary to locate and fix errors found by the debugger.

When debugging is concluded, click Window → Show View → Other and select Project Explorer from the options. This displays the list of projects again.

Result: You have debugged your application and returned to the Project Explorer view.

Developing Applications Using the Forge Tool

Red Hat JBoss Developer Studio offers Forge Tools for developing Java EE applications and to extend the IDE functionality in Eclipse. Start developing Java EE applications using either the Forge context menu or the command line from the IDE.

Creating a New Project

After you have created a Forge project you can set up persistence, add entities and fields, and create scaffold for the project.

To create a new project:

Press Ctrl+4 to start Forge and open the JBoss Forge context menu.

Click Project:New to open the Create a new project window.

In the Create a new project window:

In the Project name field, type a project name.

In the Top level package field, type {com.example} as the top package.

In the Project location field, enter a target location for the Forge project.

In the Stack list, click Java EE 7.

Click Finish.

Figure 2.9. Create a New Forge Project

Result: The project is listed in the Project Explorer view.

Setting Up Persistence

Setting up the JPA prerequisites, creates the persistence.xml file in the project and adds the required dependencies to the pom.xml file.

Note: While creating the JPA entity, the Forge console automatically detects any prerequisites that must be set up and prompts you to create those at runtime.

To set up persistence:

Press Ctrl+4 to open the JBoss Forge context menu.

Click JPA: New Entity. The window is populated with default values.

Click Next to continue using the default values or edit the fields to change the values.

In the Configure your connection settings window, ensure that the fields display the appropriate values and then click Next.

In the Create a new JPA entity window:

In the Package Name field, type the package name.

In the Type Name field, type a name for the new entity.

Click Finish.

Result: The new entity appears in the JBoss editor and is also listed in the Project Explorer view with the name: .java.

Figure 2.10. .java Displayed in the JBoss Editor

Adding Fields to the Entity

To add fields to the entity:

Press Ctrl+4 to open the JBoss Forge context menu.

Click JPA: New Field.

In the Create a new field window:

In the Target Entity field, select {package_name.model.entity}.

In the Field Name field, type FirstName.

Click Finish.

Figure 2.11. Add Field to the Entity

Repeat steps 1 through 4 to add more fields to the entity.

Result: The fields are added to the Customer.java file.

Creating a Scaffold

Scaffolding is automatic code generation by a program, using available information, usually a database to generate a basic CRUD (create, read, update, delete) admin interface. The Scaffold Generate command is used to create the scaffold.

To create the scaffold:

Press Ctrl+4 to open the JBoss Forge context menu.

Click Scaffold Generate.

In the Scaffold Type list, click Angular JS and then click Next.

If your project is not configured to use all the technologies that you want to use, Forge prompts you to set up the dependencies. Click Next.

In the Select JPA entities window:

Select the check box in the Targets field.

Select the Generate REST resources check box.

Click Finish.

Figure 2.12. Select JPA Entities to Create the Scaffold

Result: The entities are created and listed in the Project Explorer view.

Running and Testing the Application

In this example we use the JBoss EAP server to run the application.

To run the application:

In the Project Explorer view, right-click the application and click Run As → Run on Server. Alternatively, drag and drop the application from the Project Explorer view to the JBoss EAP 1 server in the Servers view. The application opens in the default browser.

Click Customers and then click Create to create a new customer.

In the FirstName and the LastName fields, enter the first and last names and click Save. The customer is added to the application.

Use the Search for Customers section to search for customers by their first and/or last names.

Creating Extensions or Add-ons

The add-ons/extensions run inside the IDE. After adding commands and features to the add-on, no further changes are required for the extensions or add-ons to run in another IDE.

To create an add-on:

Press Ctrl+4 to open the JBoss Forge context menu.

Click Project:New.

In the Create a new project window:

In the Project name field, type a name for the add-on.

In the Project type list, click Forge Addon (JAR).

Click Next.

In the Furnace Addon Setup window, Depend on these addons section, Forge automatically selects the prerequisites. Review the dependencies and click Finish.

Press Ctrl+4 to open the Forge context menu.

Select Java: New Class to open the Java: New Class window.

In the Type Name field, type CustomCommand and click Finish. The CustomCommand.java file opens in the JBoss editor.

To change this Java class into a Forge command:

Press Ctrl+4 to open the Forge context menu.

Select Addon: New UI Command to open the Generates a UICommand implementation window.

In the Generates a UICommand implementation window:

In the Type Name field, type CustomCommand.

In the Command name field, type custom.

Click Finish.

Figure 2.13. Add a Command

The command is listed in the CustomerCommand.java file.

Press Ctrl+4 to open the Forge context menu.

Select Build and Install an Addon to open the Build and install a Forge addon window.

Click Finish to install the add-on into the IDE.

To execute the installed command:

Press Ctrl+4 to open the Forge context menu.

Select custom.

Add parameters to the method in order to add user input to the command. Copy and paste the following command in the CustomCommand.java file:

        package org.jboss.forge.addon.commands;

        import org.jboss.forge.addon.configuration.Configuration;
        import org.jboss.forge.addon.resource.URLResource;
        import org.jboss.forge.addon.ui.command.AbstractUICommand;
        import org.jboss.forge.addon.ui.context.UIBuilder;
        import org.jboss.forge.addon.ui.context.UIContext;
        import org.jboss.forge.addon.ui.context.UIExecutionContext;
        import org.jboss.forge.addon.ui.input.UIInput;
        import org.jboss.forge.addon.ui.metadata.UICommandMetadata;
        import org.jboss.forge.addon.ui.metadata.WithAttributes;
        import org.jboss.forge.addon.ui.util.Metadata;
        import org.jboss.forge.addon.ui.util.Categories;
        import org.jboss.forge.addon.ui.result.Result;
        import org.jboss.forge.addon.ui.result.Results;

        import java.lang.Override;
        import java.lang.Exception;

        import javax.inject.Inject;

        public class JIRASetupCommand extends AbstractUICommand
        {
               @Inject
               @WithAttributes(label = "JIRA URL", required = true)
                private UIInput<URLResource> url;

        @Inject
        private Configuration config;

        @Override
        public UICommandMetadata getMetadata(UIContext context)
        {

             return Metadata.forCommand(getClass())
                    .name("JIRA: Setup")
                    .description("Setup the JIRA Addon")
                    .category(Categories.create("JIRA", "Setup"));
        }

        @Override
        public void initializeUI(UIBuilder builder) throws Exception

        {
              builder.add(url);
        }

         @Override
         public Result execute(UIExecutionContext context)
         {
               String targetUrl = url.getValue().getFullyQualifiedName();
               Configuration subset = config.subset("jira");
               subset.setProperty("url", targetUrl);
               return Results.success("JIRA URL set to: "+targetUrl);
          }
         }

To rebuild and install:

In the Project Explorer view, click the created add-on.

Press Ctrl+4 to open the Forge context menu.

Select Build and Install an Addon.

Click Finish to install the add-on into the IDE.

Press Ctrl+4 to open the Forge context menu.

Click JIRA: Setup.

Figure 2.14. Add-on Listed in the Forge Context Menu

Result: The add-on is created and listed in the Forge context menu.

Did You Know?

You can launch the Forge Console by clicking Window → Show view → Forge Console. The Forge Console view opens in an inactive state.

You can start JBoss Forge by clicking the `Start {JBoss Forge_version} ` button Start Button ).

To link the Forge Console output with the open editor, click the Link with Editor button ( Link with Editor Button ).

Developing Applications Using the Hibernate Tools

Hibernate Tools is a collection of tools for projects related to Hibernate version 5 and earlier. The tools provide Eclipse plugins for reverse engineering, code generation, visualization and interaction with Hibernate.

Use the Hibernate Tools to easily generate, test and prototype your Hibernate or JPA mapped projects. You can also use Hibernate to Run queries, browse mappings and generate code for your data projects.

Creating a JPA Project and Connect to the Sakila-h2 Database

Prerequisites

To connect to the sakila-h2 database:

Download the sakila-h2 database from the h2 version of the Sakila database.

On the terminal, navigate to the directory where you have saved the sakila-h2.jar file and run the following command to start the database: $ ./runh2.sh.

To create a JPA project and connect to the database:

In the workspace, click File → New → Other and then search for JPA Project and double-click it to open the New JPA Project wizard.

In the New JPA Project wizard:

In the Project name field, type a name for the project.

In the Target runtime field, click a runtime server that you wish to use.

In the JPA version list, click 2.1.

Click Next.

Figure 2.15. Create a New JPA Project

In the Java Configure project for building a Java application window, select the source folder on the build path and click Next.

In the JPA Facet window, click Add connection.

In the New Connection Profile window:

Click Generic JDBC.

In the Name field, type sakila.

Click Next.

Click the New Driver Definition icon ( New Driver Definition Icon ) located next to the Drivers field.

Click the Name/Type tab, click Generic JBDC Driver and then click the JAR list tab.

Click Add JAR/Zip and then select the previously downloaded sakila-h2.jar file.

Figure 2.16. Select sakila-h2.jar File

Click the Properties tab and enter the following details in the Properties table:

Click Connection URL and type jdbc:h2:tcp://localhost/sakila.

Click Driver Class, and then click the ellipsis icon ellipses icon .

In the Available Classes from Jar List window, click Browse for class. Click OK when the required driver is found.

Click User ID, type sa.

In the New Driver Definition window, click OK.

In the New Connection Profile window, click Finish to return to the JPA Facet window.

In the Platform list, click Hibernate (JPA 2.1).

In the JPA implementation pane, Type list, either click User Library and then click Manage libraries ( manage libraries icon ). In the Preferences (Filtered) window add the libraries, OR click Disable Library Configuration.

Click Finish.

Result: The project is created and is listed in the Project Explorer view.

Generating DDL and Entities

DDL, Data Definition Language, is a syntax to define data structures. Generate DDL and entities to enable Hibernate runtime support in an Eclipse JPA project.

To generate DDL and Entities:

In the Project Explorer view, right-click the {project_name}.

Click JPA Tools → Generate Tables from Entities or Generate Entities from Tables. The Generate Entities window (or the Generate Tables from Entities window) appears.

In the Generate Entities window:

In the Output directory field, change the default directory, if required.

Optionally, in the Package field, type the package name.

Ensure that the Use Console Configuration check box is selected.

In the Console Configuration list, ensure that the relevant configuration is shown.

Click Finish.

Figure 2.17. Generate Entities

Creating a Hibernate Mapping File

Hibernate mapping files specify how your objects relate to database tables. To create basic mappings for properties and associations, i. e. generate .hbm.xml files:

Create a new Hibernate Mapping file:

Click File → New.

In the New wizard, locate Hibernate and then click Hibernate XML Mapping file (hbm.xml).

Click Next.

In the New Hibernate XML Mapping files (hbm.xml) window:

Click Add Class to add classes or click Add Packages to add packages. You can create an empty .hbm file by not selecting any packages or classes. An empty .hbm file is created in the specified location.

Click the depth control check box to define the dependency depth used when choosing classes.

Click Next.

Select the target folder location.

In the File name field, type a name for the file and click Finish.

Result: The hibernate.hbm.xml file opens in the default editor.

Creating a Hibernate Configuration File

For reverse engineering, prototype queries, or to simply use Hibernate Core, a hibernate.properties or hibernate.cfg.xml file is needed. Hibernate Tools provides a wizard to generate the hibernate.cfg.xml file if required.

To create a Hibernate Configuration file:

Create a new cfg.xml file:

Click File → New → Other.

In the New wizard, locate Hibernate and then click Hibernate Configuration File (cfg.xml).

Click Next.

In the Create Hibernate Configuration File (cfg.xml) window, select the target folder for the file and then click Next.

In the Hibernate Configuration File (cfg.xml) window:

The Container field, by default, shows the container folder.

The File name field, by default, shows the configuration file name.

In the Database dialect list, click the relevant database.

In the Driver class list, click the driver class depending on the database dialect that you just selected.

In the Connection URL list, click the relevant URL.

Click the Create a console configuration check box to use the hibernate.cfg.xml file as the basis of the console configuration.

Click Finish.

Figure 2.18. Create a New cfg.xml File

Result: The new hibernate.cfg.xml file opens in the default editor.

Creating a Hibernate Console Configuration

A Console configuration describes how the Hibernate plugin configures Hibernate. It also describes the configuration files and classpaths needed to load the POJOs, JDBC drivers, etc. It is required to make use of query prototyping, reverse engineering and code generation. You can have multiple console configurations per project, but for most requirements, one configuration is sufficient.

To create a Hibernate console configuration:

Create a cfg.xml file:

Click File → New → Other.

In the New wizard, locate Hibernate and then click Hibernate Configuration File (cfg.xml).

Click Next.

In the Create Hibernate Configuration window, Main tab:

In the Name field, the generated name provided by default can be edited if required.

In the Type field, click Core.

In the Hibernate Version list, select the relevant version.

In the Project field, type a project name or click Browse to locate an existing project.

In the Database connection field, click New to configure a new database connection or leave as is to use the default connection.

In the Property file field, click Setup to set the path to the first hibernate.properties file found in the selected project (refer to the Did You Know, Setup Property File section for detailed steps). Once created the path of the .properties file displays in the Property file field.

In the Configuration file field, click Setup to set the path to the first hibernate.cfg.xml file found in the selected project (refer to the Did you know, Setup Configuration File section for detailed steps). Once created, the path of the hibernate.cfg.xml file displays in the Configuration file field.

Click Finish.

Figure 2.19. Create Hibernate Console

Modifying the Hibernate Configurations

You can edit the Hibernate Configurations from the Hibernate Configurations view.

To modify the Hibernate Configurations:

Click Window → Show View → Other and then click Hibernate Configurations.

In the Hibernate Configurations view, right-click the {project_name} and click Edit Configuration.

The Edit launch configuration properties window displays. Edit the fields.

To close the Hibernate Configurations view, right-click the configuration and then click Close Configuration.

Generating Code and Reverse Engineering

Hibernate tools’ reverse engineering and code generation features allow you to generate a range of artifacts based on a database or an existing Hibernate configuration, like mapping files or annotated classes. Among others, these generated artifacts can be POJO Java source files, hibernate.hbm.xml files, hibernate.cfg.xml generation and schema documentation.

To generate code:

Configure Hibernate:

Click Window → Perspective → Open Perspective → Other.

Search for Hibernate and double-click it. The Hibernate Configurations view appears.

View the Hibernate Code Generation Configurations:

In the toolbar, next to the Run icon, click the down arrow.

Click Hibernate Code Generation Configurations.

Expand Hibernate Code Generation and then click New_configuration.

In the Create, manage, and run configurations window, in the Name field, type a logical name for the code generation launcher. If you do not specify a name, the default name, New_Generation, is used.

In the Main tab, enter the following details:

Note

The At least one exporter option must be selected warning indicates that for the launcher to work you must select an exporter on the Exporter tab. The warning disappears after you select an exporter.

In the Console Configuration list, click the name of the console configuration to be used when generating code.

In the Output directory field, click Browse and select an output directory. This is the default location where all output will be written. You can enter absolute directory paths, for example: d:/temp. Note that existing files will be overwritten/ if the correct directory is not specified.

To reverse engineer the database defined in the connection information, click the Reverse engineering from JDBC connection check box. JBoss Developer Studio generates code based on the database schema when this option is used.If this option is not enabled, the code generation is based on the existing mappings specified in the Hibernate Console configuration.

In the Package field, add a default package name for any entities found when reverse engineering.

In the reveng.xml field, click Setup to select an existing reveng.xml file, or create a new one. This file controls certain aspects of the reverse engineering process, such as:

how JDBC types are mapped to Hibernate types

which tables are included or excluded from the process

In the reveng. strategy field, click Browse and provide an implementation of a ReverseEngineeringStrategy. this must be done if the reveng.xml file does not provide enough customization; the class must be in the classpath of the Console Configuration because if not, you will get a class not found exception.

Note

Refer to the Did You Know, Create, manage, and run configurations window, Main tab, Check Boxes section for details of the selected check boxes.

The Exporter tab specifies the type of code that is generated. Each selection represents an Exporter that generates the code. In the Exporter tab:

Click the Use Java 5 syntax check box to use a Java 5 syntax for the Exporter

Click the Generate EJB3 annotations check box to generate EJB 3 annotations

Select the Exporters from the Exporters table. Refer to the Did You Know, Exporter section for details about the exporters.

Each Exporter selected in the preceding step uses certain properties that can be set up in the Properties section. In the Properties section, you can add and remove predefined or custom properties for each of the exporters.

Click Add next to the Properties table to add a property to the chosen Exporter. In the resulting dialog box, select the property from the proposed list and the appropriate value for it. For an explanation of the property and its value, refer to the Did You Know, Exporter Property and its Values section.

Click the Refresh tab and enter the following:

Click the Refresh resources upon completion check box to refresh the resources and click one of the following:

The entire workspace: To refresh the entire workspace.

The selected resource: To only refresh the selected resource

The project containing the selected resource: To refresh the project containing the selected resource

The folder containing the selected resource: To refresh the folder containing the selected resource

Specific resources: To refresh specific resources; then click Specify Resources to open the Edit Working Set window and select the working set.

Click the Recursively include sub-folders check box to refresh the sub-folders.

Click the Common tab and enter the following:

In the Save as pane, click Local file to save the configuration as a local file, OR click Shared file and then select a shared file location.

In the Display in favourites menu pane, click the menu to display the configuration.

In the Encoding pane, click the format that you want the configuration to be encoded to.

In the Standard Input and Output pane, click the Allocate console check box and optionally click the Input File and Output File check boxes and select the relevant options.

Click the Launch in background check box to show the configuration launch progress in the background.

Click Apply and then click Run.

Did You Know?

Setting Up the Property File

To set up the property file:

In the Create Hibernate Configuration window, Main tab, click Setup.

In the Setup property file window, click Create new to create a new property file (or click Use existing to choose an existing file as a property file).

In the Create Hibernate Properties file (.properties) window, click the parent folder name and then click Finish.

Setting Up the Configuration File

To set up the configuration file:

In the Create Hibernate Configuration window, Main tab, click Setup.

In the Setup configuration file window, click Use existing to choose an existing file as a property file (or click Create new to create a new property file).

In the Select hibernate.cfg.xml file window, expand the parent folder, choose the file to use as the hibernate.cfg.xml file, and then click OK.

Creating, Managing, and Running the Configurations Window, Main tab, Check Boxes

The following check boxes are selected by default in the Create, manage, and run configurations window, Main tab:

Generate basic typed composite ids: When a table has a multi-column primary key, a <composite-id> mapping will always be created. If this option is enabled and there are matching foreign-keys, each key column is still considered a 'basic' scalar (string, long, etc.) instead of a reference to an entity. If you disable this option a <key-many-to-one> property is created instead. Note that a <many-to-one> property is still created, but is simply marked as non-updatable and non-insertable.

Detect optimistic lock columns: Automatically detects optimistic lock columns. Controllable via reveng. strategy; the current default is to use columns named VERSION or TIMESTAMP.

Detect many-to-many tables: Automatically detects many-to-many tables. Controllable via reveng. Strategy.

Detect one-to-one associations: Reverse engineering detects one-to-one associations via primary key and both the hbm.xml file and annotation generation generates the proper code for it. The detection is enabled by default (except for Seam 1.2 and Seam 2.0) reverse engineering. For Hibernate Tools generation there is a check box to disable this feature if it is not required.

Exporter Property and Values

jdj5: Generates Java 5 syntax

ejb3: Generates EJB 3 annotations

for_each: Specifies for which type of model elements the exporter should create a file and run through the templates. Possible values are: entity, component, configuration.

template_path: Creates a custom template directory for this specific exporter. You can use Eclipse variables.

template_name: Name for template relative to the template path.

outputdir: Custom output directory for the specific exporter. You can use Eclipse variables.

file_pattern: Pattern to use for the generated files, with a path relative to the output dir. Example: /.java.

Dot.executable: Executable to run GraphViz (only relevant, but optional for Schema documentation).

Drop: Output will contain drop statements for the tables, indices, and constraints.

delimiter: Is used in the output file.

create: Output will contain create statements for the tables, indices, and constraints.

scriptToConsole: The script will be output to Console.

exportToDatabase: Executes the generated statements against the database.

outputFileName: If specified the statements will be dumped to this file.

haltOnError: Halts the build process if an error occurs.

Format: Applies basic formatting to the statements.

schemaUpdate: Updates a schema.

query: HQL Query template

Exporter

Domain code (.java): Generates POJOs for all the persistent classes and components found in the given Hibernate configuration.

Hibernate XML Mappings (.hbm.xml): Generate mapping (hbm.xml) files for each entity.

DAO code (.java): Generates a set of DAOs for each entity found.

Generic Exporter (<hbmtemplate>): Generates a fully customizable exporter that can be used to perform custom generation.

Hibernate XML Configuration (.cfg.xml): Generates a hibernate.cfg.xml file; used to keep the hibernate.cfg.xml file updated with any newly discovered mapping files.

Schema Documentation (.html): Generates a set of HTML pages that document the database schema and some of the mappings.

Schema Export (.ddl): Generates the appropriate SQL DDL and allows you to store the result in a file or export it directly to the database.

HQL Query Execution Exporter: Generates HQL Query according to given properties.

Troubleshooting

Problems While Loading Database Driverclass

Error message: Problems while loading database driverclass (org.h2.Driver)

Resolution: To avoid this error, you must select a predefined DTP connection profile in the Database Connection dropdown. Also, the jar can be added on the Classpath page of the Console Configuration wizard if you don’t want to have it on the project classpath.

Right-click {project_name} → Properties → Java Build Path.

Click the Libraries tab and then click Add External JARs.

Navigate to the downloaded database JAR file and click OK.

In the Properties for {project_name} window, click Apply and then click OK.

Creating Your First Mobile Web Application

Mobile Web Tools provides an HTML5 Project wizard that enables you to create web applications optimized for mobile devices. The HTML5 Project wizard is a useful starting point for creating all new HTML5 web applications in the IDE. The wizard generates a sample ready-to-deploy HTML5 mobile application with REST resources from a Maven archetype.

As demonstrated in this article, you can customize the application using the JBoss Tools HTML Editor, deploy and view the application with the mobile browser simulator BrowserSim, and use LiveReload to refresh BrowserSim as the application source code is modified and saved in the IDE.

The instructions here demonstrate how to complete the following tasks:

the section called “Creating an HTML5 Project”

the section called “Building and Deploying the Application”

the section called “Viewing the Application with BrowserSim”

the section called “Enabling LiveReload for BrowserSim”

the section called “Changing the Application”

This article guides you through each of these configuration requirements and must be completed in the order given.

Prerequisite: Configuring the IDE for an Available Server

The instructions in this article show you how to deploy your HTML5 web application to a server. The IDE must be configured for any servers to which you want to deploy applications, including the location and type of application server and any custom configuration or management settings. You can complete this configuration at the time of deploying the application but in this article it is assumed that you have completed the configuration beforehand.

For information on configuring a local runtime server and deploying applications to it, see Deploy Apps to a Local Server.

Creating an HTML5 Project

The HTML5 Project wizard generates a sample project based on a Maven archetype and the project and application identifiers provided by you. The Maven archetype version is indicated in the Description field of the wizard first page and you can change the version, and therefore the project look and dependencies, by selected either an enterprise or non-enterprise target runtime within the wizard.

To create a HTML5 project, complete the following steps:

In JBoss Central, under Start from scratch, click HTML5 Project.

From the Target Runtime list, select an IDE-ready server and click Next.

Complete the fields about the HTML5 project as follows:

In the Project name field, type a name for the project.

In the Package field, type an alpha-numeric package for the project.

Click Finish.

When prompted with 'HTML5 Project' Project is now ready, click Finish.

The project is generated and listed in the Project Explorer view.

Building and Deploying the Application

After the HTML5 project is generated, it can immediately be built and deployed to an application server.

To build and deploy the application, complete the following steps:

In the Project Explorer view, right-click {project name} and click Run As → Run on Server.

Ensure Choose an existing server is selected.

From the table of servers, expand localhost, select the server on which to deploy the application and click Finish.

Figure 2.20. Selecting the server to run the application

The Console view shows output from the server starting and deploying the application. When deployment is complete, an IDE default web browser opens and shows the deployed web application.

Figure 2.21. Enterprise HTML5 web application Viewed in Browser

Figure 2.22. Non-enterprise HTML5 web application Viewed in Browser

Viewing the Application with BrowserSim

The HTML5 web application has an interface optimized for mobile devices. You can view and test such web pages as they would be on mobile devices using BrowserSim. This mobile device web browser simulator provides skins for different mobile devices, making it easy to test and debug web applications for mobile devices.

To view the application with BrowserSim, complete the following steps:

Ensure JBoss is the perspective in use. To open the JBoss perspective, click Window → Open Perspective → Other and double-click JBoss.

In the Servers view, expand the server adapter to list the application.

Right-click {application name} and click Show In → BrowserSim.

Figure 2.23. HTML5 Web Application Viewed with BrowserSim

Enabling LiveReload for BrowserSim

Mobile Web Tools supports the LiveReload protocol for automatic reloading of web pages in enabled browsers as the application source is modified and saved. LiveReload can be enabled for your system browsers and, as demonstrated here, BrowserSim. This provides an interactive web development experience.

To enable LiveReload for BrowserSim, complete the following steps:

Close any open BrowserSim simulated devices.

In the Servers view, right-click an existing server to display the context menu and click New → Server.

From the list, expand Basic, select LiveReload Server and click Finish.

In the Servers view, right-click LiveReload Server and click Start.

In the Servers view, right-click {application name} and click Show In → BrowserSim.

LiveReload is automatically enabled for this BrowserSim simulated device and all subsequent devices opened while the LiveReload server is running.

Changing the Application

With LiveReload enabled for BrowserSim, you can make changes to your application source code and BrowserSim automatically reloads the application when changes are saved. This is demonstrated here by making a simple change to the project index.html file, specifically changing the text in the application title banner.

To change your application, complete the following steps:

In the Project Explorer view, expand {project name} → src → main → webapp.

Double-click index.html to open it for editing with the JBoss Tools HTML Editor.

Locate the following line of code inside the <body> tags

<h3>HTML5 Quickstart</h3>

and replace it with

<h3>My Quickstart</h3>

Save the file by pressing Ctrl+S (or Cmd+S).

This code change modifies the heading displayed on the main application page. Notice that BrowserSim automatically reloads the web page when you save the changed file and the application modifications are immediately visible.

Did You Know?

You can also launch the HTML5 Project wizard from the JBoss perspective by clicking File → New → HTML5 Project.

You can test an undeployed .html file with BrowserSim by right-clicking the .html file in the Project Explorer view and clicking Open With → BrowserSim.

To set BrowserSim as the IDE default web browser, in the JBoss perspective click Window → Web Browser → BrowserSim or click Window → Preferences → General → Web Browser and from the External web browsers list select BrowserSim.

You can also enable LiveReload for already opened BrowserSim simulated devices. After starting the LiveReload server, right-click the BrowserSim simulated device frame and click Enable LiveReload.

Generating a HTML5 Web Application Using the Mobile Web Palette

The IDE provides the Mobile Web palette that allows the user to make interactive web applications. This palette offers a wide range of features including drag-and-drop widgets for adding common web interface framework features such as HTML5, jQuery Mobile, and Ionic tags to html files. It also contains widgets like Panels, Pages, Lists, Buttons to make the applications more user friendly and efficient.

Use the instructions to complete the following steps:

the section called “Adding a New HTML5 jQuery Mobile File to a Project”

the section called “Adding New Pages to the Web Application”

the section called “Customizing the Home Page of the Web Application”

the section called “Running and Testing the HTML5 Mobile Application Using BrowserSim”

Adding a New HTML5 jQuery Mobile File to a Project

The HTML5 jQuery Mobile file template consists of JavaScript and CSS library references that are inserted in the file’s HTML header. The template also inserts a skeleton of the jQuery Mobile page and listview widgets in the file’s HTML body. The following procedure details the steps to insert the template into your project.

To create a new HTML5 jQuery Mobile file in an existing project:

In the Project Explorer view, expand [project name] → src → main.

Right-click webapp and click New → HTML File.

Complete the fields about the html file as follows:

Ensure the parent folder field shows [project name]/src/main/webapp.

In the File name field, type a name for the HTML5 file.

Click Next.

From the Templates table, select HTML5 jQuery Mobile Page (1.4) and click Finish.

Figure 2.24. Select HTML5 jQuery Mobile Page (1.4)

Result: The new file is listed in the Project Explorer view under the project webapp directory and the file opens in the editor.

Adding New Pages to the Web Application

Use the jQuery Mobile Page widget to add pages to your mobile web application as follows:

In the Project Explorer view, expand [project name] → src → main → webapp.

Right-click the new html file and click Open With → JBoss Tools HTML Editor.

In the Palette view, click the jQuery Mobile tab to view the available widgets and click Page.

Complete the fields about the page as follows:

In the Header field, type a name for the page header.

In the Footer field, type a name for the page footer.

Click Finish.

Figure 2.25. Adding a New Page

Save the changes to the file by clicking the Save icon.

Result: A page is added to the html file. JS and CSS references are also automatically added to the file by the Page widget wizard.

Figure 2.26. New Page Added to the HTML File

Customizing the Home Page of the Web Application

Use the widgets in the jQuery Mobile palette to customize the page. Use the instructions to add a menu to the page. This menu links to three other pages: Home, Search, and the Add Contacts page.

To create and add the menu to your application page:

the section called “Adding a Panel to the Page”

the section called “Adding a List to the Panel”

the section called “Adding a Button in the Header of the Page to Display the List”

Adding a Panel to the Page

Place the cursor where you want the panel, in the html file.

In the Palette view, in the jQuery Mobile tab, click Panel.

Complete the fields about the Panel as follows:

In the ID field, type my_panel_ID.

Clear the Add Menu check box.

Click Finish.

Save the html file.

Figure 2.27. Adding a New Panel

Result: A corresponding code snippet, for the newly added panel, is added to the html file where you had placed the cursor.

Adding a List to the Panel

Within the panel’s code snippet, place your cursor at the desired location for the new list.

In the Palette view, in the jQuery Mobile tab, click ListView.

Complete the fields about the ListView as follows:

In the Items section, 1 tab, in the Label field, type the name for the first list item on the page.

In the URL (href) field, type a URL identifier for the label.

Figure 2.28. New Listitem Added to the Panel

Click Finish.

Save the html file.

Result: The new list item name appears in the code snippet.

Figure 2.29. Code for the New Listitem in the Panel Added

Adding a Button in the Header of the Page to Display the List

Place the cursor within the header at the desired location for the new button.

In the Palette view, in the jQuery Mobile tab, click Button.

Complete the fields about the button as follows:

In the Label field, type Menu.

In the URL (href) field, type # followed by the panel ID (#my_panel_ID, in this case).

In the Icon list, select an icon.

In the Icon position list, select a desired value.

Select the Icon only check-box.

Click Finish.

Save the html file.

Figure 2.30. Adding a Button

Result: The following code is added to the body of the html file.

<div data-role="page" id="page-1">
    <div data-role="panel" id="my_panel_ID">
        <ul data-role="listview" id="listview-1">
            <li><a href="1st_item.html">1st_item</a></li>
            <li><a href="item2.html">Item 2</a></li>
            <li><a href="item3.html">Item 3</a></li>
        </ul>
    </div>

    <div data-role="header">
        <h1>This is the Page Header</h1>
        <a href="#my_panel_ID" id="button-1" class="ui-btn ui-icon-plus ui-btn-icon-notext ui-corner-all">Menu</a>
    </div>

    <div data-role="content">
        <p>Page content goes here.</p>
    </div>

    <div data-role="footer">
        <h4>This is the Page Footer</h4>
    </div>
</div>

Running and Testing the HTML5 Mobile Application Using BrowserSim

Test the newly added elements to the application by navigating to the interface on BrowserSim as follows:

In the Project Explore view, expand [project name] → src → main → webapp.

Right-click the changed html file and click Open With → BrowserSim.

Result: A simulated device appears and displays the application.

Figure 2.31. The Changes Made to the HTML File Displayed on BrowserSim

Did You Know?

To access the jQuery Mobile palette when the Palette view is not visible, click Window → Show View → Other, expand General and select Palette.

Add BrowserSim in the toolbar by clicking Window → Customize Perspective and select BrowserSim under Command Groups Availability. It appears as a Phone icon in the toolbar.

Use the Panel widget to create menus, collapsible columns, drawers, and more. The List View widget is an unordered list containing links to list items. jQuery Mobile applies the necessary styles to make the listview mobile friendly.

Add contacts to the Add Contacts page by following the above listed procedure. You can add Name, Email, Phone Number fields to the Add Contacts page by using the Text Input icon in the Mobile Web palette.

Creating Your First Hybrid Mobile Application

Mobile Hybrid Tools enables you to quickly create Cordova-based hybrid mobile applications using the Hybrid Mobile Project wizard. This wizard is a useful starting point for creating all new Cordova-based mobile applications in the IDE.

As illustrated in this article, from this foundation you can customize the application by adding a range of Cordova plug-ins for accessing device hardware with the Cordova Plug-in Discovery wizard. You can also test your Cordova-based hybrid mobile applications without leaving the IDE using CordovaSim, a mobile application simulator. The IDE also allows you to deploy your Hybrid Mobile project on the FeedHenry server.

The Hybrid Mobile Project wizard is also an ideal starting point for new users to Hybrid Mobile Tools and CordovaSim, guiding you through the necessary steps to set up the IDE and your system for developing Cordova applications before generating a basic Cordova project.

Note

Before attempting to install or create a hybrid mobile project with JBoss Tools, ensure that the Android SDK is installed and up to date. Creating or installing hybrid mobile projects without a working and updated installation of Android SDK can result in unexpected errors.

The instructions here demonstrate how to complete the following tasks:

the section called “Prerequisites”

the section called “Creating a Hybrid Mobile Project”

the section called “Customizing the Hybrid Mobile Project”

the section called “Testing the Hybrid Mobile Application using CordovaSim”

the section called “Deploying the Hybrid Mobile Project on the FeedHenry Server”

the section called “Modifying the Icon for a Mobile Application”

the section called “Editing an Application Splash Screen”

Prerequisites

Ensure that the following prerequisites are met to create a hybrid mobile project:

Enable the JBoss Hybrid Mobile Tools + CordovaSim Feature

Installing Android SDK

Enabling the JBoss Hybrid Mobile Tools + CordovaSim Feature

To enable the JBoss Hybrid Mobile Tools + CordovaSim feature:

In JBoss Central, click the Software/Update tab.

In the Features Available list, select the JBoss Hybrid Mobile Tools + CordovaSim check box and then click Install/Update.

Figure 2.32. Hybrid Mobile Tools + CordovaSim Check Box Selected

Follow the on-screen instructions to complete the installation.

During the installation process you may receive warnings about installing unsigned content. If this is the case, review the details of the content and if satisfied click OK to continue with the installation.

Once installation is complete, you are prompted to restart Eclipse. Click Yes to restart immediately and No if you need to save any unsaved changes to open projects. Note that IDE changes do not take effect until the IDE is restarted.

Installing Android SDK

To install Android SDK:

Download Android SDK and then unzip the file at a desired location.

In the IDE, click Window → Preferences.

In the Preferences window, type filter text field, type Hybrid Mobile.

In the Hybrid Mobile category, click Android.

Click Browse to locate and select the Android SDK directory on your machine.

Figure 2.33. Select the Android SDK Location

Click Apply and then click OK.

Creating a Hybrid Mobile Project

After the project wizard requirements are installed, you can restart the Hybrid Mobile Project wizard and follow it through to completion to create a template-based project. Within the wizard you must specify identifiers for the project and application and select the Cordova engine version to be used for building the project.

To create a Hybrid Mobile project, complete the following steps:

In JBoss Central, under Start from scratch, click Hybrid Mobile Project.

Complete the fields about the project and application as follows:

In the Project name field, type a name for the project.

In the Name field, type a name for the application

In the ID field, type an alpha-numeric package name for the application; IDs are akin to Java package names and must begin with an alpha character and contain at least one dot.

Figure 2.34. Provide the Project and Application Information

Click Next.

From the Available Engines table, select the latest Apache Cordova version. If the Available Engines table is empty, first click Download and follow the instructions to install the latest Cordova engine version on your system.

Click Finish.

Result: The project is created and listed in the Project Explorer view.

Customizing the Hybrid Mobile Project

Before building and running the Hybrid Mobile application, instructions are given here for customizing the project by adding the Cordova Device Motion plug-in and modifying the source code to make use of it. The plug-in gives access to the mobile device accelerometer and the code snippets added to this project check for data every one second and display the X, Y, Z acceleration values on the front page of the application. This plug-in is just one of a catalog of plug-ins available to add to your Hybrid Mobile project.

To customize the Hybrid Mobile project with the Cordova Device Motion plug-in, complete the following steps:

In the Project Explorer view, right-click {project name} and click Install Cordova Plug-in.

In the Find field, enter motion.

From the filtered list of plug-ins, select org.apache.cordova.device-motion and click Finish.

In the Project Explorer view, expand {project name} → www.

Double-click index.html to open it in the JBoss Tools HTML Editor.

Edit index.html as follows:

Before the closing </head> tag, add the following lines

<script type="text/javascript" charset="utf-8" src="cordova.js"></script>
<script type="text/javascript" charset="utf-8" src="js/index.js"></script>

Replace the code inside the <body></body> tags with the following lines

<div class="app">
     <h1>My Cordova Accelerometer App</h1>
     <div id="accelerometer">Waiting for accelerometer...</div>
</div>

Figure 2.35. The Modified index.html File

Save the index.html file by pressing Ctrl+S (or Cmd+S).

In the Project Explorer view, expand {project name} → www → js.

Double-click index.js to open it in the IDE JavaScript Editor.

Replace the code in index.js with the following lines

// The watch id references the current `watchAcceleration`
    var watchID = null;

    // Wait for device API libraries to load
    document.addEventListener("deviceready", onDeviceReady, false);

    // device APIs are available
    function onDeviceReady() {
        console.log("deviceready");
        startWatch();
    }

    // Start watching the acceleration
    function startWatch() {

        // Update acceleration every 1 seconds
        var options = { frequency: 1000 };
        watchID = navigator.accelerometer.watchAcceleration(onSuccess, onError, options);
    }

    // Stop watching the acceleration
    function stopWatch() {
        if (watchID) {
            navigator.accelerometer.clearWatch(watchID);
            watchID = null;
        }
    }

    // onSuccess: Get a snapshot of the current acceleration
    function onSuccess(acceleration) {
        var element = document.getElementById('accelerometer');
        element.innerHTML = 'Acceleration X: ' + acceleration.x + '<br />' +
                            'Acceleration Y: ' + acceleration.y + '<br />' +
                            'Acceleration Z: ' + acceleration.z;
    }

    // onError: Failed to get the acceleration
    function onError() {
        alert('onError!');
    }

Save the index.js file.

Result: Your Hybrid Mobile Project is now customized and saved.

Testing the Hybrid Mobile Application using CordovaSim

You can build and test the Hybrid Mobile application within the IDE using CordovaSim. CordovaSim is a mobile device simulator specifically for testing Cordova-based hybrid mobile applications. Using the CordovaSim control panel you can input sample data for mobile device hardware, as illustrated here for a device accelerometer.

To run and test your Hybrid Mobile application using CordovaSim, complete the following steps:

In the Project Explorer view, right-click {project name} and click Run → Run with CordovaSim.

In the CordovaSim control panel, expand Accelerometer and drag the 3D device representation to generate device accelerometer data.

Figure 2.36. Generated Device Accelerometer Data Displayed in Application

Result: Your Hybrid Mobile application is running for testing.

Deploying the Hybrid Mobile Project on the FeedHenry Server

The IDE allows users to quickly and easily publish a Mobile Hybrid (Cordova) application, developed in the IDE, on the FeedHenry server.

The instructions here demonstrate to complete the following tasks:

Connect the Cordova Application to the FeedHenry Server

Push the Cordova Application to the FeedHenry Server

Connecting the Cordova Application to the FeedHenry Server

To connect the Cordova application to the FeedHenry server:

In the Project Explorer view, right-click the {project name} and New → Other.

Note

Refer to the Create a Hybrid Mobile Project section to create the Hybrid Mobile (Cordova) application.

In the search field, type FeedHenry and then select New FeedHenry Application and click Next.

In the Create FeedHenry Application window, enter the following details:

Ensure that the Source project field displays the name of the master Cordova project

In the Select FeedHenry project field, select the FeedHenry project name

In the Git remote name field, type a Git remote name for the FeedHenry repository

Click Finish.

Result: The Almost Done window confirms that the project is created on the platform. The project structure in the Project Explorer view, shows the feedhenry.js and the fhconfig.json files.

Figure 2.37. Almost done Window Confirms the Application Creation

Pushing the Cordova Application to the FeedHenry Server

To push the application to the FeedHenry server:

In the Project Explorer view, right-click the {project name} and click Team → Push Branch “master”.

If you are prompted for a confirmation to connect, click Yes.

In the Push Branch master window, enter the following details:

In the Remote field, enter the location for the remote Git repository.

In the Branch field, type master.

Click Next.

Figure 2.38. Details of the Push Added in the Push Branch master Window

Confirm the details in the Push Confirmation window and click Finish.

The Pushed to git window confirms the push. Click OK.

Log into FeedHenry at https://[your-studio-domain].feedhenry.com.

Click Projects and then click the relevant application.

Result: The Cordova application is visible in the FeedHenry instance.

Figure 2.39. Cordova Application Published on the FeedHenry Server

Modifying the Icon for a Mobile Application

Define the icons for the Mobile Hybrid application using the icon tag in the config.xml file. If an icon is not specified, the Apache Cordova logo is used as the default icon.

To change the application icon:

Save the icon in the <workspace> /www/res/icon directory of your project.

In the IDE, in the Project Explorer view, locate the config.xml file.

Note

If you are using Cordova 4.0.0 or lower, the config.xml file is located in the → www directory. For Cordova versions higher than 4.0.0 the config.xml file is located, a level higher, in the project directory.

Double-click config.xml to open it in the config.xml editor.

Click the config.xml tab to edit the file.

To define a single default icon for all platforms, add the following code anywhere withing the widget tag in the config.xml file:

<icon src="www/res/icon[image name].png" />

Figure 2.40. Icon Tag Added to the config.xml File

Alternatively,

To define a pixel-perfect icon for Android, add the following code in the config.xml file:

<platform name="android">
<icon src="www/res/android/[image name].png" density="ldpi" />
<icon src="www/res/android/[image name].png" density="mdpi" />
<icon src="www/res/android/[image name].png"density="hdpi" />
<icon src="www/res/android/[image name].png" density="xhdpi" />
</platform>

To define a pixel-perfect icon for iOS, add the following code in the config.xml file:

<platform name="ios">
<icon src="www/res/ios/[image name].png" width="180" height="180" >
</platform>

Save the config.xml file.

Right-click the application and click Run As → Run on Android Emulator.

On the emulator, click the Home button and then click the Applications button to view the modified icon for the application.

Result: The icon for the application is modified.

Figure 2.41. Modified Icon for the Application Displayed on the Android Emulator

Editing an Application Splash Screen

You can edit the splash screen associated with your application using the splash tag within the platform tag in the config.xml file. If you are using Cordova 4.0.0 or higher, you must first install the new cordova-plugin-splashscreen to continue to use the splash screen and then use the steps below to edit the splash screen. For Cordova versions lower than 4.0.0, simply follow the steps below to edit the splash screen.

To change the application splash screen:

Save the image for the splash screen in the <workspace> /www/res directory of your project.

In the IDE, in the Project Explorer view, locate the config.xml file.

Note

If you are using Cordova 4.0.0 or lower, the config.xml file is located in the > www directory. For Cordova versions higher than 4.0.0, the config.xml file is located, a level higher, in the project directory.

Double-click config.xml to open it in the config.xml editor.

Click the config.xml tab to edit the file.

To define the splash screen add the following code within the widget tag in the config.xml file:

Note

You can use any density that exists in the Android project.

<platform name="android">
<splash src="www/res/[image name].png" density="land-hdpi"/>
<splash src="www/res/[image name].png" density="land-ldpi"/>
<splash src="www/res/[image name].png" density="land-mdpi"/>
<splash src="www/res/[image name].png" density="land-xhdpi"/>

<splash src="www/res/[image name].png" density="port-hdpi"/>
<splash src="www/res/[image name].png" density="port-ldpi"/>
<splash src="www/res/[image name].png" density="port-mdpi"/>
<splash src="www/res/[image name].png" density="port-xhdpi"/>
</platform>
<preference name="SplashScreenDelay" value="10000" />

Save the config.xml file.

Right-click the application and click Run As → Run on Android Emulator.

Result: The edited splash screen appears while the application is starting.

Did You Know?

You can manually initiate installation of JBoss Hybrid Mobile Tools and CordovaSim by locating them in the JBoss Central Software/Update tab or by dragging the following link into JBoss Central: https://devstudio.jboss.com/central/install?connectors=org.jboss.tools.aerogear.hybrid

You can change the Cordova engine associated with the project after it is created. In the Project Explorer view, right-click the project and click Properties. Click Hybrid Mobile Engine and select the engine you want to use. Click OK to save the engine change and close the Properties window.

You can download multiple Cordova engines to your system with which to build your projects. The Download wizard can be accessed from the Hybrid Mobile Engine pane in the project Properties window, in addition to the Hybrid Mobile Project wizard.

From the IDE you can also initiate testing of Cordova projects with a connected Android device, system Android Emulator, and system iOS Simulator. The project is built in the necessary native format during the process.

With the CordovaSim control panel, you can generate simulated data for a range of device hardware, including geolocation and battery status. CordovaSim also manages camera actions, enabling you to upload system images to simulate receiving camera data.

A Shake button under Accelerometer in the CordovaSim control panel enables you to simulate a hardware-shake gesture and test the impact on your application.

Importing and Developing an Existing FeedHenry Application

The IDE includes an Import wizard to allow users to quickly and easily import previously created FeedHenry applications. Once the application is imported, you can change or enhance the application, test the changes, and then push it back to the FeedHenry server.

Note

Before attempting to install or create a hybrid mobile project with JBoss Tools, ensure that the Android SDK is installed and up to date. Creating or installing hybrid mobile projects without a working and updated installation of Android SDK can result in unexpected errors.

Follow the provided steps to import and make changes to a FeedHenry application in your workspace:

the section called “Importing Your FeedHenry Application”

the section called “Changing the Application”

the section called “Testing the Application”

the section called “Pushing the Changes Back to the FeedHenry Server”

Prerequisites

Ensure that the following prerequisites are met to enable the FeedHenry feature:

the section called “Installing Android SDK”

the section called “Enabling the FeedHenry Feature”

the section called “Setting the Preferences for Your Application Import”

Installing Android SDK

To install Android SDK:

Download Android SDK and then unzip the file at a desired location.

In the IDE, click Window → Preferences.

In the Preferences window, type filter text field, type Hybrid Mobile.

In the Hybrid Mobile category, click Android.

Click Browse to locate and select the Android SDK directory on your machine.

Figure 2.42. Select the Android SDK Location

Click Apply and then click OK.

Enabling the FeedHenry Feature

To enable the FeedHenry feature:

In JBoss Central, click the Software/Update tab.

In the Features Available list, select the Hybrid Mobile Tools + CordovaSim check box and then click Install/Update.

Figure 2.43. Hybrid Mobile Tools + CordovaSim Check Box Selected

Follow the on-screen instructions to complete the installation.

Setting the Preferences for Your Application Import

To set the preferences:

Click Window → Preferences.

In the Preferences window, in the search field type, FeedHenry and press Enter.

Complete the following fields in the Preferences window:

Ensure that the Target URL field displays the URL to your FeedHenry server. The URL to your FeedHenry server should be something like: https://[your-studio-domain].feedhenry.com.

In the API Key field, copy and paste the API key from the FeedHenry website.

Figure 2.44. Setting Preferences for FeedHenry

Note

The user can either use an existing API key or generate a new one to set the preferences. To obtain the API key from the FeedHenry website click Settings → API Key Management. To generate a new API key, click Settings → API Key Management, and then click Add New Key.

Click Apply and then click OK to close the Preferences window.

Importing Your FeedHenry Application

Ensure that your Preferences are set before importing a FeedHenry application. If not set yet, you are prompted to set the preferences. These preferences are set once when importing an application for the first time and the configured preferences are used for all imports in the future.

To import your FeedHenry application:

Click File → Import.

Expand FeedHenry, click Import Cordova Application, and click Next.

The Import wizard displays the projects that you can import. Expand the project to import an application from and select the FeedHenry application to be imported.

In the Directory field, enter the location where you want to clone the application locally.

Click Finish.

Figure 2.45. Selecting an Application to be Imported

If you have set a password for the SSH keys, you are prompted to enter the password so that it can import the application.

Result: The FeedHenry project is successfully imported and appears in the Project Explorer view. The Cordova config.xml file for this project opens in the Editor.

Testing the Application Import

To test the application import:

In the Project Explorer view, right-click the application and then click Run As → Run w/remote FeedHenry server. A CordovaSim simulated device displaying the application appears.

Figure 2.46. Simulated Device Displaying the Imported Application

In the Enter Your Name Here field on the simulated device, type your name.

Click Say Hello From The Cloud.

Result: The simulated device displays the “Hello [Your Name]” string.

Changing the Application

After successfully importing the FeedHenry application, follow the instructions to change the application:

In the Project Explorer view, expand [application name] → www and then double-click index.html to open it using the Editor.

In the code, locate and delete the following line:

This is a basic Cordova App that can take in your name, send it to a cloud app and display the response.

Replace the deleted text with the following line:

Hello from Hybrid Mobile Tools!

Save the index.html file by pressing Ctrl+S. Alternatively, to save click File → Save or click the Save icon.

Figure 2.47. The Edited index.html File

Testing the Application

To test the imported application, right-click the application and then click Run As → Run w/remote FeedHenry server.

Figure 2.48. The Edited FeedHenry Application

The changes made to the index.html file are reflected on the simulated device. Click a corner of the displayed device to rotate it in that direction. Alternatively, right-click the simulated device and click Rotate Right or Rotate Left as to rotate it in the desired direction. To view the application on a different CordovaSim simulated device, right-click the device and click Skin. From the list of skins, select a skin to view the application.

Pushing the Changes Back to the FeedHenry Server

Use the following instructions to push changes to the application back to the FeedHenry server:

In the Project Explorer view, right-click the application name.

Click Team → Commit.

In the Commit Changes window, Commit message field, type a message for the commit.

In the Files field, select the files that you have edited and want to push to the server and then click Commit and Push.

In the Push Results [application name] window, ensure all the details are correct and click OK.

Log into FeedHenry at https://[your-studio-domain].feedhenry.com.

Click Projects.

Click the Project Title under which your application is located and then click the application.

Result: The simulated device in the App Preview section displays the change that you have just pushed to the FeedHenry server.

Figure 2.49. FeedHenry Application Edited and Displayed on the FeedHenry Server

Did You Know?

Add a new API key to your FeedHenry account by clicking Add New Key and then following the on-screen instructions.

Set up your SSH key in the FeedHenry account by clicking Settings → SSH Key Management and then following the on-screen instructions.

Troubleshooting

Git Communication Error

Figure 2.50. Git Communication Error

Error Message

Problem when cloning the application. This can be due to a network problem or missing security credentials. Refer to error log for details.

Issue

When a FeedHenry account is set up, the user’s API Keys are configured by default, but the SSH Public key must be manually configured. Importing a FeedHenry application means that the application repository is accessed via Git. Without a Public SSH key, the tools are unable to complete the action and this error appears.

Resolution

Click OK to close the Git Communication Error window.

Log into FeedHenry at: https://[your-studio-domain].feedhenry.com.

Click the icon located in the uppermost right-side corner of the screen to display the context menu.

Click Settings → SSH Key Management and then click Add New Key.

In the Public Key field, enter your SSH Public key. An existing Public SSH key is available at ~/.ssh/id_rsa.pub. Alternatively, generate a new Public SSH key with the following command:

$ ssh-keygen -t rsa -C "username@example.com"

Invalid Preferences

Figure 2.51. Invalid Preferences

Issue

When the user logs into FeedHenry for the first time, the Invalid Preferences dialog box appears informing the user that the FeedHenry connection preferences are unidentified or invalid and that the user must correct the preferences. Refer to the Set the Preferences section for details to set the connection preferences.

Chapter 3. Deploying Your Applications

Deploying Applications to a Local Server

In order to deploy applications to a server from within the IDE, you must configure the IDE with information about the server. For a local server this information includes the following:

a server runtime environment with details about the server location, runtime JRE, and configuration files

a server adapter with management settings for the server runtime environment, including access parameters, launch arguments, and publishing options

JBoss Server Tools enables you to efficiently configure a local server ready for use with the IDE using Runtime Detection. As demonstrated here, this feature is useful for quickly configuring a server for deploying and testing an application.

Instructions are provided here for completing the following tasks:

the section called “Configuring the IDE for a Local Runtime Server”

the section called “Deploying an Application”

the section called “Changing and Republishing the Application”

Configuring the IDE for a Local Runtime Server

Runtime Detection searches a given local system path to locate certain types of runtime servers. For any servers found, Runtime Detection automatically generates both a default server runtime environment and a default server adapter. These items can be used as they are for immediate application deployment or customized to meet your requirements.

To configure the IDE for a local runtime server, complete the following steps:

Click Window → Preferences → JBoss Tools → JBoss Runtime Detection.

Click Add.

Locate the directory containing the runtime server and click OK.

In the table of located runtimes, ensure the runtime is selected and click OK.

Click Apply and click OK to close the Preferences window.

A default runtime environment and server adapter are generated for the server, with the server adapter listed in the Servers view.

Deploying an Application

When you have configured the IDE for the server, you can deploy applications to the server from the IDE using the server adapter. The server adapter enables runtime communication between the server and IDE for easy deployment of applications and server management.

To deploy an application to the server, complete the following steps:

In the Project Explorer view, right-click {project name} and click Run As → Run on Server.

Ensure Choose an existing server is selected.

From the table of servers, expand localhost, select the server on which to deploy the application and click Finish.

The Console view shows output from the server starting and deploying the application. When deployment is complete, an IDE default web browser opens and shows the deployed web application.

Changing and Republishing the Application

By default, the server adapter configures the server for automatic publishing when changed resources are saved. This automatic publishing action applies to application resources that can be interchanged in the dedicated deployment location of the server without requiring the application to stop and restart, such as .html files. For other changed resources, such as .java files, you need to republish the application such that it forces a rebuild of the application.

To republish the application to the server after changes that cannot be automatically published, complete the following steps:

In the Servers view, expand the server adapter to list the applications allocated to the server.

Right-click {application name} and click Full Publish.

The Console view shows output from the server replacing the deploying application. Unless LiveReload is enabled in the web browser, you must manually reload the web browser to see the changed application.

Did You Know?

You can also configure servers by right-clicking the Servers view and selecting New → Server or by clicking Manually define a new server in the Run on Server wizard.

Paths previously searched by Runtime Detection can be automatically searched on every workspace start. Click Window → Preferences → JBoss Tools → JBoss Runtime Detection and from the Paths table select the check boxes of the appropriate paths. Click Apply and click OK to close the Preferences window.

You can customize the server adapter and server runtime environment with the Server Editor. In the Servers view, double-click the server adapter to open the Server Editor.

You can initiate download and installation of runtime servers from the IDE. Click Window → Preferences → JBoss Tools → JBoss Runtime Detection. Click Download and from the table of runtime servers select the one to install and click Next. Follow the on-screen instructions to complete the download and installation process.

Configuring a Remote Server

Remote servers allow developers to access and deploy to a JBoss instance that is not a local machine. Developers can use remote servers to set up multiple environments for development and testing purposes and share them with other developers. Another reason to use a remote server with Red Hat JBoss Developer Studio is to allow developers to share and deploy automated tests to run in a non-local environment.

The following instructions are used to set up a remote server for JBoss Enterprise Middleware application servers. A complete server definition requires a server adapter (or server) that allows the IDE to communicate with and manage the remote server.

Click the Servers view. If the Servers view is not visible, click Window → Show View → Server.

Use the appropriate instructions depending on the number of existing servers listed in the Servers tab:

If there are no existing servers, click No servers are available. Click this link to create a new server…​.

If there are one or more existing servers, right-click an existing server and click New → Server.

In the New Server wizard, add the relevant information for the following fields:

From the Select the server type list, select a JBoss Enterprise Middleware application server.

The Server’s host name and Server name fields are completed by default. In the Server name field, you can type a custom name by which to identify the server in the Servers view.

Click Next > to continue.

Figure 3.1. Define a New Remote Server

Configure the required Server Adapter details:

For the The server is field, click the Remote radio button option.

For the Controlled by field, select either the Filesystem and shell operations or Management Operations radio button option depending on your requirements.

Note

If you select Management Operations for the Controlled by field, you must set up an admin user on the server by using the $SERVER_HOME/bin/add-users.sh script (for Linux, or the $SERVER_HOME\bin\add-users.bat file for Windows) and enter the same credentials in the server editor or during the server start.

The Server is externally managed. Assume server is started field is used when the user wants to deploy the server but does not want the IDE to stop or start the server for them. Depending on the requirements, select this check box or leave it unchecked, as is default.

A remote server can now be created without assigning a runtime to it. Depending on the requirements, select the Assign a runtime to this server check box (and select an existing runtime or create a new one) or leave the box unselected.

Note

Creating a Remote Server without a runtime results in limitations. For example, the JMX connection does not work because it requires libraries from the runtime to connect via JMX. Additionally, automatic port detection occurs using the standalone.xml file, which is not available if a runtime is not specified. These and other minor issues related to hard-coded minor fixes in maintenance releases may occur if no runtime is specified for the Remote Server.

Figure 3.2. Create a New Server Adapter

Add the remote system integration details as follows:

In the drop-down menu, select the appropriate host type in the Host field.

The default host is Local.

If required, use the New Host button to create a new host, which may be remote or local. Supported connection types for remote hosts are FTP Only or SSH Only.

Figure 3.3. New Host Options

Add the Remote Runtime Details as follows:

Specify a path to the directory that contains the remote server in the Remote Server Home field.

Specify the remote server’s base directory (the default value for this is the standalone directory within server home directory) in the Remote Server Base Directory field. This location is within the Remote Server Home directory (specifically in the $SERVER_HOME/BASE_DIRECTORY/configuration/ directory).

Specify the file to use for the remote server’s configuration (the default value for this is the standalone.xml file) in the Remote Server Configuration File field. This location is within the Remote Server Home directory (specifically in the $SERVER_HOME/BASE_DIRECTORY/configuration/ directory).

Either click Next > to continue to the (optional) next step to add or remove server resources or click Finish to conclude the new remote server configuration.

Figure 3.4. Connect to a Remote System

Optional: Add or remove resources configured on the server as follows:

To add a resource, select the appropriate resource in the Available pane and click Add >. To add all available resources, click Add All >>.

To remove a resource, select the appropriate resource in the Configured pane and click < Remove. To remove all configured resources, click << Remove All.

Click Finish to complete the server configuration.

Figure 3.5. Add and Remove Server Resources

Result: You have successfully configured a remote server. The new server is listed in the Servers tab. Right click the server to view operations, including Start to start the server.

Note

If the Server is externally managed. Assume server is started check box was selected in step 4, clicking Start does not start the server. Instead, it marks the server to indicate that it has started and the web poller checks whether the server is running.