[RHEL6] be2net driver not using multiple queues for interrupts
Issue
- be2net dirver not using multiple queues for interrupts - during testing I note that by RHEL server machine isn't using the multiple interrupt queues:
# uname -a Linux bfs-dl360g7-51 2.6.32-131.0.15.el6.x86_64 #1 SMP Tue May 10 15:42:40 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux # cat /etc/redhat-release Red Hat Enterprise Linux Server release 6.1 (Santiago) # /sbin/ethtool eth5 Settings for eth5: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supports auto-negotiation: No Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: FIBRE PHYAD: 1 Transceiver: external Auto-negotiation: off Supports Wake-on: g Wake-on: d Link detected: yes # /sbin/ethtool -i eth5 driver: be2net version: 2.103.298r firmware-version: 2.102.453.0 bus-info: 0000:06:00.1 # cat /proc/interrupts | egrep "(CPU|eth5)" CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 CPU8 CPU9 CPU10 CPU11 CPU12 CPU13 CPU14 CPU15 CPU16 CPU17 CPU18 CPU19 CPU20 CPU21 CPU22 CPU23 59: 31 0 0 0 0 0 0 0 0 0 0 0 0 0 0 40 0 0 0 0 121153332 0 0 0 IR-PCI-MSI-edge eth5-tx 60: 837 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge eth5-rxq0 61: 171383224 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge eth5-rxq1 62: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge eth5-rxq2 63: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge eth5-rxq3 64: 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge eth5-rxq4
Environment
Red Hat Enterprise Linux 6.1
Subscriber exclusive content
A Red Hat subscription provides unlimited access to our knowledgebase of over 48,000 articles and solutions.
Welcome! Check out the Getting Started with Red Hat page for quick tours and guides for common tasks.
