The server does not configure all QLogic Fibre Channel cards when running Veritas kernel module(s)

Issue

• The server has multiple QLogic FC cards, but the driver within the OS is only configuring one of them.

• The following command shows the server has multiple QLogic FC cards as they can be correctly detected at the PCI level, but a kernel driver is present only for the first card.

  # lspci -k | grep -A 3 "Fibre Channel"
  03:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)
          Subsystem: QLogic Corp. QLE2562 PCI Express to 8Gb FC Dual Channel
          Kernel driver in use: qla2xxx
          Kernel modules: qla2xxx, windrvr6, ql2300_stub
  03:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)
          Subsystem: QLogic Corp. QLE2562 PCI Express to 8Gb FC Dual Channel
          Kernel driver in use: qla2xxx
          Kernel modules: qla2xxx, windrvr6, ql2300_stub
  --
  81:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)
          Subsystem: QLogic Corp. Device 815d
          Kernel modules: qla2xxx, windrvr6, ql2300_stub
  81:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)
          Subsystem: QLogic Corp. Device 815d
          Kernel modules: qla2xxx, windrvr6, ql2300_stub
  82:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)
          Subsystem: QLogic Corp. Device 815d
          Kernel modules: qla2xxx, windrvr6, ql2300_stub
  82:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02)
          Subsystem: QLogic Corp. Device 815d
          Kernel modules: qla2xxx, windrvr6, ql2300_stub