Red Hat Training

A Red Hat training course is available for Red Hat Enterprise Linux

5.2 Technical Notes

Red Hat Enterprise Linux 5

Detailed notes on the changes implemented in Red Hat Enterprise Linux 5.2

Abstract

The Red Hat Enterprise Linux 5.2 Technical Notes list and document the changes made to the Red Hat Enterprise Linux operating system and its accompanying applications between Red Hat Enterprise Linux 5.1 and minor release Red Hat Enterprise Linux 5.2.
This document is a record of all package changes since the last minor update of Red Hat Enterprise Linux 5.

1.  Added Packages

dapl-2.0.7-2.el5
  • Group: System Environment/Libraries
  • Summary: Library providing access to the DAT 1.2 and 2.0 APIs
  • Description:
    libdat and libdapl provide a userspace implementation of the DAT 1.2 and 2.0
    API that is built to natively support InfiniBand/iWARP network technology.
    
dstat-0.6.6-3.el5
  • Group: System Environment/Base
  • Summary: Versatile resource statistics tool
  • Description:
    Dstat is a versatile replacement for vmstat, iostat, netstat and ifstat.
    Dstat overcomes some of their limitations and adds some extra features,
    more counters and flexibility. Dstat is handy for monitoring systems
    during performance tuning tests, benchmarks or troubleshooting.
    
    Dstat allows you to view all of your system resources instantly, you
    can eg. compare disk usage in combination with interrupts from your
    IDE controller, or compare the network bandwidth numbers directly
    with the disk throughput (in the same interval).
    
    Dstat gives you detailed selective information in columns and clearly
    indicates in what magnitude and unit the output is displayed. Less
    confusion, less mistakes.
    
ecryptfs-utils-41-1.el5
  • Group: System Environment/Base
  • Summary: The eCryptfs mount helper and support libraries
  • Description:
    eCryptfs is a stacked cryptographic filesystem that ships in the
    Linux kernel. This package provides the mount helper and supporting
    libraries to perform key management and mount functions.
    
    Install ecryptfs-utils if you would like to mount eCryptfs.
    
freeipmi-0.5.1-5.el5
  • Group: Applications/System
  • Summary: FreeIPMI
  • Description:
    The FreeIPMI project provides "Remote-Console" (out-of-band) and
    "System Management Software" (in-band) based on Intelligent
    Platform Management Interface specification.
    
    This package contains a Technology Preview for FreeIPMI. Please visit
    http://www.redhat.com/support/service/ for details on the Red Hat support
    policies.
    
gtk-vnc-0.3.2-3.el5
  • Group: Development/Libraries
  • Summary: A GTK widget for VNC clients
  • Description:
    gtk-vnc is a VNC viewer widget for GTK. It is built using coroutines
    allowing it to be completely asynchronous while remaining single threaded.
    
ibsim-0.4-2.el5
  • Group: System Environment/Libraries
  • Summary: InfiniBand fabric simulator for management
  • Description:
    ibsim provides simulation of infiniband fabric for using with OFA OpenSM,
    diagnostic and management tools.
    
infiniband-diags-1.3.6-1.el5
  • Group: System Environment/Libraries
  • Summary: OpenFabrics Alliance InfiniBand Diagnostic Tools
  • Description:
    This package provides IB diagnostic programs and scripts needed to
    diagnose an IB subnet.
    
isns-utils-0.91-0.1.el5
  • Group: System Environment/Daemons
  • Summary: The iSNS daemon and utility programs
  • Description:
    The iSNS package contains the daemon and tools to setup a iSNS server,
    and iSNS client tools. The Internet Storage Name Service (iSNS) protocol
    allows automated discovery, management and configuration of iSCSI and
    Fibre Channel devices (using iFCP gateways) on a TCP/IP network.
    
libcxgb3-1.1.4-1.el5
  • Group: System Environment/Libraries
  • Summary: Chelsio T3 iWARP HCA Userspace Driver
  • Description:
    Userspace hardware driver for use with the libibverbs InfiniBand/iWARP verbs
    library. This driver enables Chelsio iWARP capable ethernet devices.
    
libehca-1.2-1.el5
  • Group: System Environment/Libraries
  • Summary: IBM InfiniBand HCA Userspace Driver
  • Description:
    IBM hardware driver for use with libibverbs user space verbs access
    library.
    
libibcm-1.0.2-1.el5
  • Group: System Environment/Libraries
  • Summary: Userspace InfiniBand Communication Manager.
  • Description:
    libibcm provides a userspace InfiniBand Communication Managment library.
    
libibcommon-1.0.8-1.el5
  • Group: System Environment/Libraries
  • Summary: OpenFabrics Alliance InfiniBand management common library
  • Description:
    libibcommon provides common utility functions for the OFA diagnostic and
    management tools.
    
libibmad-1.1.6-1.el5
  • Group: System Environment/Libraries
  • Summary: OpenFabrics Alliance InfiniBand MAD library
  • Description:
    libibmad provides low layer IB functions for use by the IB diagnostic
    and management programs. These include MAD, SA, SMP, and other basic
    IB functions.
    
libibumad-1.1.7-1.el5
  • Group: System Environment/Libraries
  • Summary: OpenFabrics Alliance InfiniBand umad (user MAD) library
  • Description:
    libibumad provides the user MAD library functions which sit on top of
    the user MAD modules in the kernel. These are used by the IB diagnostic
    and management tools, including OpenSM.
    
libibverbs-1.1.1-9.el5
  • Group: System Environment/Libraries
  • Summary: Library providing access to InfiniBand/iWARP hardware verbs protocol
  • Description:
    libibverbs is a library that allows userspace processes to use
    InfiniBand/iWARP "verbs" as described in the InfiniBand Architecture
    Specification. This includes direct hardware access for fast path
    operations.
    
    For this library to be useful, a device-specific plug-in module should
    also be installed.
    
libipathverbs-1.1-10.el5
  • Group: System Environment/Libraries
  • Summary: QLogic InfiniPath HCA Userspace Driver
  • Description:
    QLogic hardware driver for use with libibverbs user space verbs access
    library. This driver supports QLogic InfiniPath based cards.
    
libmlx4-1.0-3.el5
  • Group: System Environment/Libraries
  • Summary: Mellanox ConnectX InfiniBand HCA Userspace Driver
  • Description:
    Mellanox hardware driver for use with libibverbs user space verbs access
    library. This driver supports Mellanox ConnectX architecture cards.
    
libmthca-1.0.4-9.el5
  • Group: System Environment/Libraries
  • Summary: Mellanox InfiniBand HCA Userspace Driver
  • Description:
    Mellanox hardware driver for use with libibverbs user space verbs access
    library. This driver supports Mellanox based Single Data Rate and Dual Data
    Rate cards, including those from Cisco, Topspin, and Voltaire. It does
    not support the Connect-X architecture based Quad Data Rate cards (libmlx4
    handles that hardware).
    
libnes-0.5-2.el5
  • Group: System Environment/Libraries
  • Summary: NetEffect RNIC Userspace Driver
  • Description:
    Userspace hardware driver for use with the libibverbs InfiniBand/iWARP verbs
    library. This driver enables NetEffect iWARP capable ethernet devices.
    
librdmacm-1.0.7-1.el5
  • Group: System Environment/Libraries
  • Summary: Userspace RDMA Connection Manager.
  • Description:
    librdmacm provides a userspace RDMA Communication Managment API.
    
libsdp-1.1.99-9.el5
  • Group: System Environment/Libraries
  • Summary: A library for direct userspace use of Sockets Direct Protocol
  • Description:
    libsdp is an LD_PRELOAD-able library that can be used to have existing
    applications use InfiniBand Sockets Direct Protocol (SDP) instead of
    TCP sockets, transparently and without recompilation. For information
    on how to configure libsdp, see libsdp.conf, which is installed in
    $(sysconfdir) (usually /usr/local/etc or /etc).
    
libsmi-0.4.5-2.el5
  • Group: System Environment/Libraries
  • Summary: A library to access SMI MIB information
  • Description:
    Libsmi is a C library to access MIB module information through
    a well defined API that hides the nasty details of locating
    and parsing SMIv1/v2 MIB modules.
    
    This package contains tools to check, dump, and convert MIB
    definitions and a steadily maintained and revised archive
    of all IETF and IANA maintained standard MIB modules.
    
mpi-selector-1.0.0-2.el5
  • Group: System Environment/Base
  • Summary: Provides site-wide and per-user MPI implementation selection
  • Description:
    A simple tool that allows system administrators to set a site-wide
    default for which MPI implementation is to be used, but also allow
    users to set their own default MPI implementation, thereby overriding
    the site-wide default.
    
    The default can be changed easily via the mpi-selector command --
    editing of shell startup files is not required.
    
mstflint-1.3-1.el5
  • Group: Applications/System
  • Summary: Mellanox firmware burning tool
  • Description:
    This package contains a burning tool for Mellanox manufactured HCA cards.
    It also provides access to the relevant source code.
    
nspluginwrapper-0.9.91.5-21.el5
  • Group: Networking/WWW
  • Summary: A compatibility layer for Netscape 4 plugins
  • Description:
    nspluginwrapper makes it possible to use Netscape 4 compatible plugins
    compiled for ppc into Mozilla for another architecture, e.g. x86_64.
    
    This package consists in:
    * npviewer: the plugin viewer
    * npwrapper.so: the browser-side plugin
    * mozilla-plugin-config: a tool to manage plugins installation and update
    
ofed-docs-1.3-3.el5
  • Group: Documentation/Man
  • Summary: OpenFabrics Enterprise Distribution documentation
  • Description:
    Documentation from OFED 1.3
    
opensm-3.1.8-1.el5
  • Group: System Environment/Daemons
  • Summary: OpenIB InfiniBand Subnet Manager and management utilities
  • Description:
    OpenSM is the OpenIB project's Subnet Manager for Infiniband networks.
    The subnet manager is run as a system daemon on one of the machines in
    the infiniband fabric to manage the fabric's routing state. This package
    also contains various tools for diagnosing and testing Infiniband networks
    that can be used from any machine and do not need to be run on a machine
    running the opensm daemon.
    
openswan-2.6.12-2.el5
  • Group: System Environment/Daemons
  • Summary: Openswan IPSEC implementation
  • Description:
    Openswan is a free implementation of IPSEC & IKE for Linux. IPSEC is
    the Internet Protocol Security and uses strong cryptography to provide
    both authentication and encryption services. These services allow you
    to build secure tunnels through untrusted networks. Everything passing
    through the untrusted net is encrypted by the ipsec gateway machine and
    decrypted by the gateway at the other end of the tunnel. The resulting
    tunnel is a virtual private network or VPN.
    
    This package contains the daemons and userland tools for setting up
    Openswan on a freeswan enabled kernel.
    
perftest-1.2-10.el5
  • Group: Productivity/Networking/Diagnostic
  • Summary: IB Performance tests
  • Description:
    gen2 uverbs microbenchmarks
    
pexpect-2.3-1.el5
  • Group: Development/Languages
  • Summary: Pure Python Expect-like module
  • Description:
    Pexpect is a pure Python module for spawning child applications; controlling
    them; and responding to expected patterns in their output. Pexpect works like
    Don Libes' Expect. Pexpect allows your script to spawn a child application and
    control it as if a human were typing commands.
    
    Pexpect can be used for automating interactive applications such as ssh, ftp,
    passwd, telnet, etc. It can be used to automate setup scripts for duplicating
    software package installations on different servers. And it can be used for
    automated software testing. Pexpect is in the spirit of Don Libes' Expect, but
    Pexpect is pure Python. Unlike other Expect-like modules for Python, Pexpect
    does not require TCL or Expect nor does it require C extensions to be compiled.
    It should work on any platform that supports the standard Python pty module.
    
python-iniparse-0.2.3-4.el5
  • Group: Development/Libraries
  • Summary: Python Module for Accessing and Modifying Configuration Data in INI files
  • Description:
    iniparse is an INI parser for Python which is API compatible
    with the standard library's ConfigParser, preserves structure of INI
    files (order of sections & options, indentation, comments, and blank
    lines are preserved when data is updated), and is more convenient to
    use.
    
python-setuptools-0.6c5-2.el5
  • Group: Development/Languages
  • Summary: Download, build, install, upgrade, and uninstall Python packages
  • Description:
    setuptools is a collection of enhancements to the Python distutils that allow
    you to more easily build and distribute Python packages, especially ones that
    have dependencies on other packages.
    
qlvnictools-0.0.1-8.el5
  • Group: System Environment/Base
  • Summary: VNIC ULP service
  • Description:
    VNIC ULP service
    
qperf-0.4.0-1.el5
  • Group: Networking/Diagnostic
  • Summary: Measure socket and RDMA performance
  • Description:
    Measure socket and RDMA performance.
    
rsyslog-2.0.0-11.el5
  • Group: System Environment/Daemons
  • Summary: Enhanced system logging and kernel message trapping daemons
  • Description:
    Rsyslog is an enhanced multi-threaded syslogd supporting, among others, MySQL,
    syslog/tcp, RFC 3195, permitted sender lists, filtering on any message part,
    and fine grain output format control. It is quite compatible to stock sysklogd
    and can be used as a drop-in replacement. Its advanced features make it
    suitable for enterprise-class, encryption protected syslog relay chains while
    at the same time being very easy to setup for the novice user.
    
setroubleshoot-plugins-2.0.4-2.el5
  • Group: Applications/System
  • Summary: Analysis plugins for use with setroubleshoot
  • Description:
    This package provides a set of analysis plugins for use with
    setroubleshoot. Each plugin has the capacity to analyze SELinux AVC
    data and system data to provide user friendly reports describing how
    to interpret SELinux AVC denials.
    
srptools-0.0.4-2.el5
  • Group: System Environment/Base
  • Summary: Tools for using the InfiniBand SRP protocol devices
  • Description:
    In conjunction with the kernel ib_srp driver, srptools allows you to
    discover and use SCSI devices via the SCSI RDMA Protocol over InfiniBand.
    
system-config-netboot-0.1.45.1-1.el5
  • Group: Applications/System
  • Summary: network booting/install configuration utility (GUI)
  • Description:
    system-config-netboot is a utility which allows you to configure
    diskless environments and network installations.
    
tpm-tools-1.3.1-1.el5
  • Group: Applications/System
  • Summary: Management tools for the TPM hardware
  • Description:
    tpm-tools is a group of tools to manage and utilize the Trusted Computing
    Group's TPM hardware. TPM hardware can create, store and use RSA keys
    securely (without ever being exposed in memory), verify a platform's
    software state using cryptographic hashes and more.
    
trousers-0.3.1-4.el5
  • Group: System Environment/Libraries
  • Summary: TCG's Software Stack v1.2
  • Description:
    TrouSerS is an implementation of the Trusted Computing Group's Software Stack
    (TSS) specification. You can use TrouSerS to write applications that make use
    of your TPM hardware. TPM hardware can create, store and use RSA keys
    securely (without ever being exposed in memory), verify a platform's software
    state using cryptographic hashes and more.
    
tvflash-0.9.0-2.el5
  • Group: Applications/System
  • Summary: Tool to manage Mellanox HCA firmware flash memory
  • Description:
    tvflash is used to query and update the firmware flash memory attached
    to Mellanox InfiniBand HCAs.
    
udftools-1.0.0b3-0.1.el5
  • Group: Applications/Archiving
  • Summary: Linux UDF Filesystem userspace utilities
  • Description:
    Linux UDF Filesystem userspace utilities.
    
virt-viewer-0.0.2-2.el5
  • Group: Applications/System
  • Summary: Virtual Machine Viewer
  • Description:
    Virtual Machine Viewer provides a graphical console client for connecting
    to virtual machines. It uses the GTK-VNC widget to provide the display,
    and libvirt for looking up VNC server details.
    
wdaemon-0.13-1
  • Group: User Interface/X Hardware Support
  • Summary: Hotplug helper for Wacom X.org driver
  • Description:
    Helper application which emulates persistent input devices for Wacom tablets
    so they can be plugged and unplugged while X.org server is running. This should
    go away as soon X.org properly supports hotplugging.
    
xulrunner-1.9-0.beta5.6.el5
  • Group: Applications/Internet
  • Summary: XUL Runtime for Gecko Applications
  • Description:
    XULRunner provides the XUL Runtime environment for Gecko applications.
    
yum-updatesd-0.9-2.el5
  • Group: System Environment/Base
  • Summary: Update notification daemon
  • Description:
    yum-updatesd provides a daemon which checks for available updates and
    can notify you when they are available via email, syslog or dbus.
    

2.  Dropped Packages

No packages listed here.

3.  Updated Packages

Deployment_Guide-5.1.0-11 - Deployment_Guide-5.2-9
  • Group: Documentation
  • Summary: Deployment Guide
  • Description:
    This Deployment Guide documents relevant information regarding the
    deployment, configuration and administration of Red Hat Enterprise Linux
    5.2.
    
  • No added dependencies
  • No removed dependencies
ImageMagick-6.2.8.0-3.el5.4 - ImageMagick-6.2.8.0-4.el5_1.1
  • Group: Applications/Multimedia
  • Summary: An X application for displaying and manipulating images.
  • Description:
    ImageMagick(TM) is an image display and manipulation tool for the X
    Window System. ImageMagick can read and write JPEG, TIFF, PNM, GIF,
    and Photo CD image formats. It can resize, rotate, sharpen, color
    reduce, or add special effects to an image, and when finished you can
    either save the completed work in the original format or a different
    one. ImageMagick also includes command line programs for creating
    animated or transparent .gifs, creating composite images, creating
    thumbnail images, and more.
    
    ImageMagick is one of your choices if you need a program to manipulate
    and dis play images. If you want to develop your own applications
    which use ImageMagick code or APIs, you need to install
    ImageMagick-devel as well.
    
  • No added dependencies
  • No removed dependencies
NetworkManager-0.6.4-6.el5 - NetworkManager-0.6.4-8.el5
  • Group: System Environment/Base
  • Summary: Network connection manager and user applications
  • Description:
    NetworkManager attempts to keep an active network connection available at all
    times. It is intended only for the desktop use-case, and is not intended for
    usage on servers.  The point of NetworkManager is to make networking
    configuration and setup as painless and automatic as possible. If using DHCP,
    NetworkManager is _intended_ to replace default routes, obtain IP addresses
    from a DHCP server, and change nameservers whenever it sees fit.
    
  • Added Dependencies:
    • autoconf
    • automake
    • intltool
    • libtool
  • No removed dependencies
OpenIPMI-2.0.6-5.el5.4 - OpenIPMI-2.0.6-6.el5
  • Group: System Environment/Base
  • Summary: OpenIPMI (Intelligent Platform Management Interface) library and tools
  • Description:
    The Open IPMI project aims to develop an open code base to allow access to
    platform information using Intelligent Platform Management Interface (IPMI).
    This package contains the tools of the OpenIPMI project.
    
  • No added dependencies
  • No removed dependencies
Virtualization-5.1.0-12 - Virtualization-5.2-9
  • Group: Documentation
  • Summary: Virtualization Guide
  • Description:
    The Red Hat Enterprise Linux Virtualization Guide contains
    information on installation, configuring, administering, tips,
    tricks and troubleshooting Virtualization technologies used in Red
    Hat Enterprise Linux.
    
  • No added dependencies
  • No removed dependencies
a2ps-4.13b-57.1.el5 - a2ps-4.13b-57.2.el5
  • Group: Applications/Publishing
  • Summary: Converts text and other types of files to PostScript(TM).
  • Description:
    The a2ps filter converts text and other types of files to PostScript(TM).
    A2ps has pretty-printing capabilities and includes support for a wide
    number of programming languages, encodings (ISO Latins, Cyrillic, etc.),
    and medias.
    
  • Added Dependencies:
    • psutils
  • No removed dependencies
acl-2.2.39-2.1.el5 - acl-2.2.39-3.el5
  • Group: System Environment/Base
  • Summary: Access control list utilities.
  • Description:
    This package contains the getfacl and setfacl utilities needed for
    manipulating access control lists.
    
  • No added dependencies
  • No removed dependencies
alsa-utils-1.0.14-2.rc4.el5 - alsa-utils-1.0.14-3.rc4.el5
  • Group: Applications/Multimedia
  • Summary: Advanced Linux Sound Architecture (ALSA) utilities
  • Description:
    This package contains command line utilities for the Advanced Linux Sound
    Architecture (ALSA).
    
  • No added dependencies
  • No removed dependencies
amtu-1.0.4-4 - amtu-1.0.6-1.el5
  • Group: System Environment/Base
  • Summary: Abstract Machine Test Utility (AMTU)
  • Description:
    Abstract Machine Test Utility (AMTU) is an administrative utility to check
    whether the underlying protection mechanism of the hardware are still being
    enforced. This is a requirement of the Controlled Access Protection Profile
    FPT_AMT.1, see
    http://www.radium.ncsc.mil/tpep/library/protection_profiles/CAPP-1.d.pdf
    
  • No added dependencies
  • No removed dependencies
anaconda-11.1.2.87-1 - anaconda-11.1.2.113-1
  • Group: Applications/System
  • Summary: Graphical system installer
  • Description:
    The anaconda package contains the program which was used to install your
    system. These files are of little use on an already installed system.
    
  • Added Dependencies:
    • libdhcp-devel >= 1.20-5
    • libnl-devel >= 1.0-0.10.pre5.5
  • Removed Dependencies:
    • glib2-devel >= 2.11.1-5
    • libdhcp-devel >= 1.16
apr-util-1.2.7-6 - apr-util-1.2.7-7.el5
  • Group: System Environment/Libraries
  • Summary: Apache Portable Runtime Utility library
  • Description:
    The mission of the Apache Portable Runtime (APR) is to provide a
    free library of C data structures and routines. This library
    contains additional utility interfaces for APR; including support
    for XML, LDAP, database interfaces, URI parsing and more.
    
  • No added dependencies
  • No removed dependencies
at-spi-1.7.11-2.fc6 - at-spi-1.7.11-3.el5
  • Group: System Environment/Libraries
  • Summary: Assistive Technology Service Provider Interface
  • Description:
    at-spi allows assistive technologies to access GTK-based
    applications. Essentially it exposes the internals of applications for
    automation, so tools such as screen readers, magnifiers, or even
    scripting interfaces can query and interact with GUI controls.
    
  • No added dependencies
  • No removed dependencies
audit-1.5.5-7.el5 - audit-1.6.5-9.el5
  • Group: System Environment/Daemons
  • Summary: User space tools for 2.6 kernel auditing
  • Description:
    The audit package contains the user space utilities for
    storing and searching the audit records generate by
    the audit subsystem in the Linux 2.6 kernel.
    
  • Added Dependencies:
    • checkpolicy
    • openldap-devel
    • selinux-policy-devel
  • No removed dependencies
authconfig-5.3.12-2.el5 - authconfig-5.3.21-3.el5
  • Group: System Environment/Base
  • Summary: Command line tool for setting up authentication from network services
  • Description:
    Authconfig is a command line utility which can configure a workstation
    to use shadow (more secure) passwords. Authconfig can also configure a
    system to be a client for certain networked user information and
    authentication schemes.
    
  • Added Dependencies:
    • python >= 2.4.1
  • Removed Dependencies:
    • python
autofs-5.0.1-0.rc2.55 - autofs-5.0.1-0.rc2.88
  • Group: System Environment/Daemons
  • Summary: A tool for automatically mounting and unmounting filesystems.
  • Description:
    autofs is a daemon which automatically mounts filesystems when you use
    them, and unmounts them later when you are not using them. This can
    include network filesystems, CD-ROMs, floppies, and so forth.
    
  • No added dependencies
  • No removed dependencies
bash-3.1-16.1 - bash-3.2-21.el5
  • Group: System Environment/Shells
  • Summary: The GNU Bourne Again shell (bash) version 3.2
  • Description:
    The GNU Bourne Again shell (Bash) is a shell or command language
    interpreter that is compatible with the Bourne shell (sh). Bash
    incorporates useful features from the Korn shell (ksh) and the C shell
    (csh). Most sh scripts can be run by bash without modification. This
    package (bash) contains bash version 3.2, which improves POSIX
    compliance over previous versions.
    
  • Added Dependencies:
    • autoconf
    • gettext
  • No removed dependencies
bind-9.3.3-10.el5 - bind-9.3.4-6.P1.el5
  • Group: System Environment/Daemons
  • Summary: The Berkeley Internet Name Domain (BIND) DNS (Domain Name System) server.
  • Description:
    BIND (Berkeley Internet Name Domain) is an implementation of the DNS
    (Domain Name System) protocols. BIND includes a DNS server (named),
    which resolves host names to IP addresses; a resolver library
    (routines for applications to use when interfacing with DNS); and
    tools for verifying that the DNS server is operating properly.
    
  • No added dependencies
  • No removed dependencies
binutils-2.17.50.0.6-5.el5 - binutils-2.17.50.0.6-6.el5
  • Group: Development/Tools
  • Summary: A GNU collection of binary utilities.
  • Description:
    Binutils is a collection of binary utilities, including ar (for
    creating, modifying and extracting from archives), as (a family of GNU
    assemblers), gprof (for displaying call graph profile data), ld (the
    GNU linker), nm (for listing symbols from object files), objcopy (for
    copying and translating object files), objdump (for displaying
    information from object files), ranlib (for generating an index for
    the contents of an archive), size (for listing the section sizes of an
    object or archive file), strings (for listing printable strings from
    files), strip (for discarding symbols), and addr2line (for converting
    addresses to file and line).
    
  • No added dependencies
  • No removed dependencies
booty-0.80.4-5 - booty-0.80.4-6
  • Group: System Environment/Libraries
  • Summary: simple python bootloader config lib
  • Description:
    Small python library for use with bootloader configuration by anaconda
    and up2date.
    
  • No added dependencies
  • No removed dependencies
busybox-1.2.0-3 - busybox-1.2.0-4.el5
  • Group: System Environment/Shells
  • Summary: Statically linked binary providing simplified versions of system commands
  • Description:
    Busybox is a single binary which includes versions of a large number
    of system commands, including a shell. This package can be very
    useful for recovering from certain types of system failures,
    particularly those involving broken shared libraries.
    
  • No added dependencies
  • No removed dependencies
cachefilesd-0.8-2.el5 - cachefilesd-0.8-5.el5
  • Group: System Environment/Daemons
  • Summary: CacheFiles userspace management daemon
  • Description:
    The cachefilesd daemon manages the caching files and directory that are
    that are used by network filesystems such a AFS and NFS to
    do persistent caching to the local disk.
    
  • No added dependencies
  • No removed dependencies
cairo-1.2.4-2.el5 - cairo-1.2.4-5.el5
  • Group: System Environment/Libraries
  • Summary: A vector graphics library
  • Description:
    Cairo is a vector graphics library designed to provide high-quality
    display and print output. Currently supported output targets include
    the X Window System, OpenGL (via glitz), in-memory image buffers, and
    image files (PDF, PostScript, and SVG). Cairo is designed to produce
    identical output on all output media while taking advantage of display
    hardware acceleration when available (eg. through the X Render
    Extension or OpenGL).
    
  • No added dependencies
  • No removed dependencies
checkpolicy-1.33.1-2.el5 - checkpolicy-1.33.1-4.el5
  • Group: Development/System
  • Summary: SELinux policy compiler
  • Description:
    Security-enhanced Linux is a feature of the Linux® kernel and a number
    of utilities with enhanced security functionality designed to add
    mandatory access controls to Linux. The Security-enhanced Linux
    kernel contains new architectural components originally developed to
    improve the security of the Flask operating system. These
    architectural components provide general support for the enforcement
    of many kinds of mandatory access control policies, including those
    based on the concepts of Type Enforcement®, Role-based Access
    Control, and Multi-level Security.
    
    This package contains checkpolicy, the SELinux policy compiler.
    Only required for building policies.
    
  • No added dependencies
  • No removed dependencies
chkconfig-1.3.30.1-1 - chkconfig-1.3.30.1-2
  • Group: System Environment/Base
  • Summary: A system tool for maintaining the /etc/rc*.d hierarchy.
  • Description:
    Chkconfig is a basic system utility. It updates and queries runlevel
    information for system services. Chkconfig manipulates the numerous
    symbolic links in /etc/rc.d, to relieve system administrators of some
    of the drudgery of manually editing the symbolic links.
    
  • No added dependencies
  • No removed dependencies
clustermon-0.10.0-5.el5 - clustermon-0.12.0-7.el5
  • Group: System Environment/Base
  • Summary: Monitoring and management of Red Hat Enterprise Linux Cluster Suite
  • Description:
    This package contains Red Hat Enterprise Linux Cluster Suite
    SNMP/CIM module/agent/provider.
    
  • Added Dependencies:
    • cman-devel
  • No removed dependencies
cman-2.0.73-1.el5 - cman-2.0.84-2.el5
  • Group: System Environment/Base
  • Summary: cman - The Cluster Manager
  • Description:
    cman - The Cluster Manager
    
  • Added Dependencies:
    • kernel-headers
  • No removed dependencies
conga-0.10.0-6.el5 - conga-0.12.0-7.el5
  • Group: System Environment/Base
  • Summary: Remote Management System
  • Description:
    Conga is a project developing management system for remote stations.
    It consists of luci, https frontend, and ricci, secure daemon that dispatches
    incoming messages to underlying management modules.
    
  • No added dependencies
  • Removed Dependencies:
    • cman-devel
control-center-2.16.0-14.el5 - control-center-2.16.0-16.el5
  • Group: User Interface/Desktops
  • Summary: GNOME Control Center
  • Description:
    GNOME (the GNU Network Object Model Environment) is an attractive and
    easy-to-use GUI desktop environment. The control-center package
    provides the GNOME Control Center utilities that allow you to setup
    and configure your system's GNOME environment (things like the desktop
    background and theme, the screensaver, system sounds, and mouse
    behavior).
    
    If you install GNOME, you need to install control-center.
    
  • No added dependencies
  • No removed dependencies
coolkey-1.1.0-5.el5 - coolkey-1.1.0-6.el5
  • Group: System Environment/Libraries
  • Summary: CoolKey PKCS #11 module
  • Description:
    Linux Driver support for the CoolKey and CAC products.
    
  • No added dependencies
  • No removed dependencies
coreutils-5.97-12.1.el5 - coreutils-5.97-14.el5
  • Group: System Environment/Base
  • Summary: The GNU core utilities: a set of tools commonly used in shell scripts
  • Description:
    These are the GNU core utilities. This package is the combination of
    the old GNU fileutils, sh-utils, and textutils packages.
    
  • No added dependencies
  • No removed dependencies
cpuspeed-1.2.1-1.48.el5 - cpuspeed-1.2.1-3.el5
  • Group: System Environment/Base
  • Summary: CPU frequency adjusting daemon
  • Description:
    cpuspeed is a daemon that dynamically changes the speed
    of your processor(s) depending upon its current workload
    if it is capable (needs Intel Speedstep, AMD PowerNow!,
    or similar support).
    
    This package also supports enabling cpu frequency scaling
    via in-kernel governors on Intel Centrino and AMD
    Athlon64/Opteron platforms.
    
  • No added dependencies
  • No removed dependencies
crash-4.0-4.6.1 - crash-4.0-5.0.3
  • Group: Development/Debuggers
  • Summary: crash utility for live systems; netdump, diskdump, kdump, LKCD or mcore dumpfiles
  • Description:
    The core analysis suite is a self-contained tool that can be used to
    investigate either live systems, kernel core dumps created from the
    netdump, diskdump and kdump packages from Red Hat Linux, the mcore kernel patch
    offered by Mission Critical Linux, or the LKCD kernel patch.
    
  • No added dependencies
  • No removed dependencies
createrepo-0.4.4-2.fc6 - createrepo-0.4.11-3.el5
  • Group: System Environment/Base
  • Summary: Creates a common metadata repository
  • Description:
    This utility will generate a common metadata repository from a directory of rpm
    packages.
    
  • Added Dependencies:
    • python
  • No removed dependencies
crypto-utils-2.3-1 - crypto-utils-2.3-2.el5
  • Group: Applications/System
  • Summary: SSL certificate and key management utilities
  • Description:
    This package provides tools for managing and generating
    SSL certificates and keys.
    
  • No added dependencies
  • No removed dependencies
cups-1.2.4-11.14.el5 - cups-1.2.4-11.18.el5
  • Group: System Environment/Daemons
  • Summary: Common Unix Printing System
  • Description:
    The Common UNIX Printing System provides a portable printing layer for
    UNIX® operating systems. It has been developed by Easy Software Products
    to promote a standard printing solution for all UNIX vendors and users.
    CUPS provides the System V and Berkeley command-line interfaces.
    
  • No added dependencies
  • No removed dependencies
cyrus-imapd-2.3.7-1.1.el5 - cyrus-imapd-2.3.7-2.el5
  • Group: System Environment/Daemons
  • Summary: A high-performance mail server with IMAP, POP3, NNTP and SIEVE support
  • Description:
    The cyrus-imapd package contains the core of the Cyrus IMAP server.
    It is a scaleable enterprise mail system designed for use from
    small to large enterprise environments using standards-based
    internet mail technologies.
    
    A full Cyrus IMAP implementation allows a seamless mail and bulletin
    board environment to be set up across multiple servers. It differs from
    other IMAP server implementations in that it is run on "sealed"
    servers, where users are not normally permitted to log in and have no
    system account on the server. The mailbox database is stored in parts
    of the filesystem that are private to the Cyrus IMAP server. All user
    access to mail is through software using the IMAP, POP3 or KPOP
    protocols. It also includes support for virtual domains, NNTP,
    mailbox annotations, and much more. The private mailbox database design
    gives the server large advantages in efficiency, scalability and
    administratability. Multiple concurrent read/write connections to the
    same mailbox are permitted. The server supports access control lists on
    mailboxes and storage quotas on mailbox hierarchies.
    
    The Cyrus IMAP server supports the IMAP4rev1 protocol described
    in RFC 3501. IMAP4rev1 has been approved as a proposed standard.
    It supports any authentication mechanism available from the SASL
    library, imaps/pop3s/nntps (IMAP/POP3/NNTP encrypted using SSL and
    TLSv1) can be used for security. The server supports single instance
    store where possible when an email message is addressed to multiple
    recipients, SIEVE provides server side email filtering.
    
  • No added dependencies
  • No removed dependencies
dbus-1.0.0-6.el5 - dbus-1.0.0-7.el5
  • Group: System Environment/Libraries
  • Summary: D-BUS message bus
  • Description:
    
    D-BUS is a system for sending messages between applications. It is
    used both for the systemwide message bus service, and as a
    per-user-login-session messaging facility.
    
  • No added dependencies
  • No removed dependencies
desktop-printing-0.19-20.el5 - desktop-printing-0.19-20.1.el5
  • Group: Applications/File
  • Summary: Desktop print icon
  • Description:
    Desktop-printing contains eggcups, a program for user print job
    notification and control.
    
  • No added dependencies
  • No removed dependencies
devhelp-0.12-11.el5 - devhelp-0.12-16.el5
  • Group: Development/Tools
  • Summary: API document browser
  • Description:
    An API document browser for GNOME 2.
    
  • Added Dependencies:
    • gecko-devel-unstable = 1.9
  • Removed Dependencies:
    • gecko-devel = 1.8.0.12
device-mapper-1.02.20-1.el5 - device-mapper-1.02.24-1.el5
  • Group: System Environment/Base
  • Summary: device mapper library
  • Description:
    This package contains the supporting userspace files (libdevmapper and
    dmsetup) for the device-mapper.
    
  • No added dependencies
  • No removed dependencies
device-mapper-multipath-0.4.7-12.el5 - device-mapper-multipath-0.4.7-17.el5
  • Group: System Environment/Base
  • Summary: Tools to manage multipath devices using device-mapper.
  • Description:
    device-mapper-multipath provides tools to manage multipath devices by instructing the
    device-mapper multipath kernel module what to do.
    The tools are :
    * multipath :  Scan the system for multipath devices and assemble them.
    * multipathd : Detects when paths fail and execs multipath to update things.
    
  • No added dependencies
  • No removed dependencies
dhcp-3.0.5-7.el5 - dhcp-3.0.5-13.el5
  • Group: System Environment/Daemons
  • Summary: DHCP (Dynamic Host Configuration Protocol) server and relay agent.
  • Description:
    DHCP (Dynamic Host Configuration Protocol) is a protocol which allows
    individual devices on an IP network to get their own network
    configuration information (IP address, subnetmask, broadcast address,
    etc.) from a DHCP server. The overall purpose of DHCP is to make it
    easier to administer a large network. The dhcp package includes the
    ISC DHCP service and relay agent.
    
    To use DHCP on your network, install a DHCP service (or relay agent),
    and on clients run a DHCP client daemon. The dhcp package provides
    the ISC DHCP service and relay agent.
    
  • No added dependencies
  • No removed dependencies
dhcpv6-0.10-33.el5 - dhcpv6-1.0.10-4.el5
  • Group: System Environment/Daemons
  • Summary: DHCPv6 - DHCP server and client for IPv6
  • Description:
    Implements the Dynamic Host Configuration Protocol (DHCP) for Internet
    Protocol version 6 (IPv6) networks in accordance with RFC 3315: Dynamic Host
    Configuration Protocol for IPv6 (DHCPv6). Consists of dhcp6s(8), the server
    DHCP daemon, and dhcp6r(8), the DHCPv6 relay agent.
    
    Install this package if you want to support dynamic configuration of IPv6
    addresses and parameters on your IPv6 network.
    
  • Added Dependencies:
    • kernel-headers
  • Removed Dependencies:
    • openssl-devel
diffutils-2.8.1-15.2.2 - diffutils-2.8.1-15.2.3.el5
  • Group: Applications/Text
  • Summary: A GNU collection of diff utilities.
  • Description:
    Diffutils includes four utilities: diff, cmp, diff3 and sdiff. Diff
    compares two files and shows the differences, line by line. The cmp
    command shows the offset and line numbers where two files differ, or
    cmp can show the characters that differ between the two files. The
    diff3 command shows the differences between three files. Diff3 can be
    used when two people have made independent changes to a common
    original; diff3 can produce a merged file that contains both sets of
    changes and warnings about conflicts. The sdiff command can be used
    to merge two files interactively.
    
    Install diffutils if you need to compare text files.
    
  • No added dependencies
  • No removed dependencies
dmraid-1.0.0.rc13-4.el5 - dmraid-1.0.0.rc13-9.el5
  • Group: System Environment/Base
  • Summary: dmraid (Device-mapper RAID tool and library)
  • Description:
    DMRAID supports RAID device discovery, RAID set activation and display of
    properties for ATARAID on Linux >= 2.4 using device-mapper.
    
  • No added dependencies
  • No removed dependencies
dovecot-1.0-1.2.rc15.el5 - dovecot-1.0.7-2.el5
  • Group: System Environment/Daemons
  • Summary: Dovecot Secure imap server
  • Description:
    Dovecot is an IMAP server for Linux/UNIX-like systems, written with security
    primarily in mind. It also contains a small POP3 server. It supports mail
    in either of maildir or mbox formats.
    
  • No added dependencies
  • No removed dependencies
dvgrab-2.0-1.2.2 - dvgrab-3.0-1.el5
  • Group: Applications/Multimedia
  • Summary: Utility to capture video from a DV camera
  • Description:
    The dvgrab utility will capture digital video from a DV source on the firewire
    (IEEE-1394) bus.
    
  • No added dependencies
  • No removed dependencies
e2fsprogs-1.39-10.el5 - e2fsprogs-1.39-15.el5
  • Group: System Environment/Base
  • Summary: Utilities for managing the second and third extended (ext2/ext3) filesystems
  • Description:
    The e2fsprogs package contains a number of utilities for creating,
    checking, modifying, and correcting any inconsistencies in second
    and third extended (ext2/ext3) filesystems. E2fsprogs contains
    e2fsck (used to repair filesystem inconsistencies after an unclean
    shutdown), mke2fs (used to initialize a partition to contain an
    empty ext2 filesystem), debugfs (used to examine the internal
    structure of a filesystem, to manually repair a corrupted
    filesystem, or to create test cases for e2fsck), tune2fs (used to
    modify filesystem parameters), and most of the other core ext2fs
    filesystem utilities.
    
    You should install the e2fsprogs package if you need to manage the
    performance of an ext2 and/or ext3 filesystem.
    
  • No added dependencies
  • No removed dependencies
eclipse-3.2.1-18.el5 - eclipse-3.2.1-19.el5
  • Group: Text Editors/Integrated Development Environments (IDE)
  • Summary: An open, extensible IDE
  • Description:
    The Eclipse Platform is designed for building integrated development
    environments (IDEs) that can be used to create applications as diverse
    as web sites, embedded Java(tm) programs, C++ programs, and Enterprise
    JavaBeans(tm).
    
  • No added dependencies
  • Removed Dependencies:
    • firefox-devel
    • nspr-devel
emacs-21.4-19.el5 - emacs-21.4-20.el5
  • Group: Applications/Editors
  • Summary: GNU Emacs text editor
  • Description:
    Emacs is a powerful, customizable, self-documenting, modeless text
    editor. Emacs contains special code editing features, a scripting
    language (elisp), and the capability to read mail, news, and more
    without leaving the editor.
    
    This package provides an emacs binary with support for X windows.
    
  • No added dependencies
  • No removed dependencies
emacspeak-23.0-2.1 - emacspeak-23.0-3.el5
  • Group: Applications/Editors
  • Summary: emacspeak -- The Complete Audio Desktop
  • Description:
    Emacspeak is a speech interface that allows visually impaired users to
    interact independently and efficiently with the computer. Emacspeak has
    dramatically changed how the author and hundreds of blind and visually
    impaired users around the world interact with the personal computer and
    the Internet. A rich suite of task-oriented speech-enabled tools provides
    efficient speech-enabled access to the evolving semantic WWW.
    When combined with Linux running on low-cost PC hardware,
    Emacspeak/Linux provides a reliable, stable speech-friendly solution that
    opens up the Internet to visually impaired users around the world.
    
  • No added dependencies
  • No removed dependencies
esc-1.0.0-32.el5 - esc-1.0.0-33.el5
  • Group: Applications/Internet
  • Summary: Enterprise Security Client Smart Card Client
  • Description:
    Enterprise Security Client allows the user to enroll and manage their
    cryptographic smartcards.
    
  • No added dependencies
  • No removed dependencies
evolution-data-server-1.8.0-25.el5 - evolution-data-server-1.12.3-6.el5
  • Group: System Environment/Libraries
  • Summary: Backend data server for Evolution
  • Description:
    The evolution-data-server package provides a unified backend for programs
    that work with contacts, tasks, and calendar information.
    
    It was originally developed for Evolution (hence the name), but is now used
    by other packages.
    
  • Added Dependencies:
    • gtk-doc
    • intltool >= 0.35.0
    • openldap-evolution-devel
    • openssl-devel
  • Removed Dependencies:
    • intltool
    • openldap-devel >= 2.0.11
file-4.17-9.0.1.el5 - file-4.17-13
  • Group: Applications/File
  • Summary: A utility for determining file types.
  • Description:
    The file command is used to identify a particular file according to the
    type of data contained by the file. File can identify many different
    file types, including ELF binaries, system libraries, RPM packages, and
    different graphics formats.
    
    You should install the file package, since the file command is such a
    useful utility.
    
  • No added dependencies
  • No removed dependencies
firefox-1.5.0.12-3.el5 - firefox-3.0-0.beta5.6.el5
  • Group: Applications/Internet
  • Summary: Mozilla Firefox Web browser
  • Description:
    Mozilla Firefox is an open-source web browser, designed for standards
    compliance, performance and portability.
    
  • Added Dependencies:
    • startup-notification-devel
    • xulrunner-devel >= 1.9-0.beta5.6
    • xulrunner-devel-unstable >= 1.9-0.beta5.6
  • Removed Dependencies:
    • cairo-devel >= 0.5
    • libjpeg-devel
    • libpng-devel
    • nspr-devel >= 4.6
    • nss-devel >= 3.11.1
    • zlib-devel
flac-1.1.2-27 - flac-1.1.2-28.el5_0.1
  • Group: Applications/Multimedia
  • Summary: An encoder/decoder for the Free Lossless Audio Codec.
  • Description:
    FLAC stands for Free Lossless Audio Codec. Grossly oversimplified, FLAC
    is similar to Ogg Vorbis, but lossless. The FLAC project consists of
    the stream format, reference encoders and decoders in library form,
    flac, a command-line program to encode and decode FLAC files, metaflac,
    a command-line metadata editor for FLAC files and input plugins for
    various music players.
    
  • No added dependencies
  • No removed dependencies
fontconfig-2.4.1-6.el5 - fontconfig-2.4.1-7.el5
  • Group: System Environment/Libraries
  • Summary: Font configuration and customization library
  • Description:
    Fontconfig is designed to locate fonts within the
    system and select them according to requirements specified by
    applications.
    
  • No added dependencies
  • No removed dependencies
fonts-indic-2.0.13-1.el5 - fonts-indic-2.1.7-2.el5
  • Group: User Interface/X
  • Summary: Free Indian truetype/opentype fonts
  • Description:
    This package provides the Hindi, Bengali, Gujarati, Punjabi, Tamil, Kannada, Malayalam, Oriya, Telugu TrueType/Opentype fonts.
    
  • No added dependencies
  • No removed dependencies
frysk-0.0.1.2007.06.21.rh2-4.el5 - frysk-0.0.1.2008.03.19.rh1-1.el5
  • Group: Development/System
  • Summary: Frysk execution analysis tool
  • Description:
    Frysk is an execution-analysis technology implemented using native Java and C++.
    It is aimed at providing developers and sysadmins with the ability to both
    examine and analyze running multi-host, multi-process, multi-threaded systems.
    Frysk allows the monitoring of running processes and threads, of locking
    primitives and will also expose deadlocks, gather data and debug any given
    process in the system.
    
  • Added Dependencies:
    • eclipse-ecj
  • Removed Dependencies:
    • /lib/libc.so.6
    • /lib64/libc.so.6
    • /usr/lib/libc.so
    • /usr/lib64/libc.so
    • binutils-devel
    • libgconf-java-devel
gcc-4.1.2-14.el5 - gcc-4.1.2-42.el5
  • Group: Development/Languages
  • Summary: Various compilers (C, C++, Objective-C, Java, ...)
  • Description:
    The gcc package contains the GNU Compiler Collection version 4.1.
    You'll need this package in order to compile C code.
    
  • Added Dependencies:
    • xulrunner-devel
  • Removed Dependencies:
    • firefox-devel
gd-2.0.33-9.3.fc6 - gd-2.0.33-9.4.el5_1.1
  • Group: System Environment/Libraries
  • Summary: A graphics library for quick creation of PNG or JPEG images
  • Description:
    The gd graphics library allows your code to quickly draw images
    complete with lines, arcs, text, multiple colors, cut and paste from
    other images, and flood fills, and to write out the result as a PNG or
    JPEG file. This is particularly useful in Web applications, where PNG
    and JPEG are two of the formats accepted for inline images by most
    browsers. Note that gd is not a paint program.
    
  • No added dependencies
  • No removed dependencies
gdb-6.5-25.el5 - gdb-6.5-37.el5
  • Group: Development/Debuggers
  • Summary: A GNU source-level debugger for C, C++, Java and other languages.
  • Description:
    GDB, the GNU debugger, allows you to debug programs written in C, C++,
    Java, and other languages, by executing them in a controlled fashion
    and printing their data.
    
  • No added dependencies
  • No removed dependencies
gdm-2.16.0-31.0.1.el5 - gdm-2.16.0-46.el5
  • Group: User Interface/X
  • Summary: The GNOME Display Manager.
  • Description:
    Gdm (the GNOME Display Manager) is a highly configurable
    reimplementation of xdm, the X Display Manager. Gdm allows you to log
    into your system with the X Window System running and supports running
    several different X sessions on your local machine at the same time.
    
  • No added dependencies
  • No removed dependencies
gedit-2.16.0-5.el5 - gedit-2.16.0-9.el5
  • Group: Applications/Editors
  • Summary: gEdit is a small but powerful text editor for GNOME
  • Description:
    gEdit is a small but powerful text editor designed specifically for
    the GNOME GUI desktop. gEdit includes a plug-in API (which supports
    extensibility while keeping the core binary small), support for
    editing multiple documents using notebook tabs, and standard text
    editor functions.
    
    You'll need to have GNOME and GTK+ installed to use gEdit.
    
  • No added dependencies
  • No removed dependencies
gfs-kmod-0.1.19-7.el5 - gfs-kmod-0.1.23-5.el5
  • Group: System Environment/Kernel
  • Summary: gfs kernel modules
  • Description:
    gfs - The Global File System is a symmetric, shared-disk, cluster file
    system.
    
  • Added Dependencies:
    • kernel-devel-ia64 = 2.6.18-92.el5
    • kernel-xen-devel-ia64 = 2.6.18-92.el5
  • Removed Dependencies:
    • kernel-devel-ia64 = 2.6.18-53.el5
    • kernel-xen-devel-ia64 = 2.6.18-53.el5
gfs-utils-0.1.12-1.el5 - gfs-utils-0.1.17-1.el5
  • Group: System Environment/Kernel
  • Summary: Utilities for managing the global filesystem (GFS)
  • Description:
    The gfs-utils package contains a number of utilities for creating,
    checking, modifying, and correcting any inconsistencies in GFS
    filesystems.
    
  • No added dependencies
  • No removed dependencies
gfs2-kmod-1.52-1.16.el5 - gfs2-kmod-1.92-1.1.el5
  • Group: System Environment/Kernel
  • Summary: gfs2 kernel module
  • Description:
    GFS2 - The GFS2 filesystem provided for RHEL5.
    
  • Added Dependencies:
    • kernel-devel-ia64 = 2.6.18-92.el5
    • kernel-xen-devel-ia64 = 2.6.18-92.el5
  • Removed Dependencies:
    • kernel-devel-ia64 = 2.6.18-53.el5
    • kernel-xen-devel-ia64 = 2.6.18-53.el5
gfs2-utils-0.1.38-1.el5 - gfs2-utils-0.1.44-1.el5
  • Group: System Environment/Kernel
  • Summary: Utilities for managing the global filesystem (GFS)
  • Description:
    The gfs2-utils package contains a number of utilities for creating,
    checking, modifying, and correcting any inconsistencies in GFS
    filesystems.
    
  • No added dependencies
  • No removed dependencies
ghostscript-8.15.2-9.1.el5 - ghostscript-8.15.2-9.1.el5_1.1
  • Group: Applications/Publishing
  • Summary: A PostScript(TM) interpreter and renderer.
  • Description:
    Ghostscript is a set of software that provides a PostScript(TM)
    interpreter, a set of C procedures (the Ghostscript library, which
    implements the graphics capabilities in the PostScript language) and
    an interpreter for Portable Document Format (PDF) files. Ghostscript
    translates PostScript code into many common, bitmapped formats, like
    those understood by your printer or screen. Ghostscript is normally
    used to display PostScript files and to print PostScript files to
    non-PostScript printers.
    
    If you need to display PostScript files or print them to
    non-PostScript printers, you should install ghostscript. If you
    install ghostscript, you also need to install the ghostscript-fonts
    package.
    
  • No added dependencies
  • No removed dependencies
glibc-2.5-18 - glibc-2.5-24
  • Group: System Environment/Libraries
  • Summary: The GNU libc libraries.
  • Description:
    The glibc package contains standard libraries which are used by
    multiple programs on the system. In order to save disk space and
    memory, as well as to make upgrading easier, common system code is
    kept in one place and shared between programs. This particular package
    contains the most important sets of shared libraries: the standard C
    library and the standard math library. Without these two libraries, a
    Linux system will not function.
    
  • No added dependencies
  • No removed dependencies
gnome-panel-2.16.1-6.el5 - gnome-panel-2.16.1-7.el5
  • Group: User Interface/Desktops
  • Summary: GNOME panel
  • Description:
    The GNOME panel provides the window list, workspace switcher, menus, and other
    features for the GNOME desktop.
    
  • No added dependencies
  • No removed dependencies
gnome-power-manager-2.16.0-8.el5 - gnome-power-manager-2.16.0-9.el5
  • Group: Applications/System
  • Summary: GNOME Power Manager
  • Description:
    GNOME Power Manager uses the information and facilities provided by HAL
    displaying icons and handling user callbacks in an interactive GNOME session.
    GNOME Power Preferences allows authorised users to set policy and
    change preferences.
    
  • No added dependencies
  • No removed dependencies
gnome-python2-desktop-2.16.0-1.fc6 - gnome-python2-desktop-2.16.0-2.el5
  • Group: Development/Languages
  • Summary: The sources for additional PyGNOME Python extension modules for the GNOME desktop
  • Description:
    The gnome-python-desktop package contains the source packages for additional
    Python bindings for GNOME. It should be used together with gnome-python.
    
  • No added dependencies
  • No removed dependencies
gnome-python2-extras-2.14.2-4.fc6 - gnome-python2-extras-2.14.2-6.el5
  • Group: Development/Languages
  • Summary: The sources for additional. PyGNOME Python extension modules.
  • Description:
    The gnome-python-extra package contains the source packages for additional
    Python bindings for GNOME. It should be used together with gnome-python.
    
  • Added Dependencies:
    • gecko-devel-unstable >= 1.9
  • Removed Dependencies:
    • firefox-devel >= 1.5.0.5
gnome-screensaver-2.16.1-5.el5 - gnome-screensaver-2.16.1-8.el5
  • Group: Amusements/Graphics
  • Summary: GNOME Screensaver
  • Description:
    gnome-screensaver is a screen saver and locker that aims to have
    simple, sane, secure defaults and be well integrated with the desktop.
    
  • Added Dependencies:
    • libXxf86misc-devel
    • libXxf86vm-devel
  • No removed dependencies
gnome-utils-2.16.0-3.el5 - gnome-utils-2.16.0-5.el5
  • Group: Applications/System
  • Summary: GNOME utility programs
  • Description:
    GNOME (GNU Network Object Model Environment) is a user-friendly set of
    GUI applications and desktop tools to be used in conjunction with a
    window manager for the X Window System. The gnome-utils package
    includes a set of small "desk accessory" utility applications for GNOME.
    
  • No added dependencies
  • No removed dependencies
gnome-volume-manager-2.15.0-4.el5 - gnome-volume-manager-2.15.0-5.el5
  • Group: Applications/System
  • Summary: The GNOME Volume Manager
  • Description:
    The GNOME Volume Manager monitors volume-related events and responds with
    user-specified policy. The GNOME Volume Manager can automount hot-plugged
    drives, automount inserted removable media, autorun programs, automatically
    play audio CDs and video DVDs, and automatically import photos from a digital
    camera. The GNOME Volume Manager does this entirely in user-space and without
    polling.
    
    The GNOME Voume Manager sits at the top end of a larger picture that aims to
    integrate the Linux system from the kernel on up through the desktop and its
    applications.
    
  • No added dependencies
  • No removed dependencies
grub-0.97-13 - grub-0.97-13.2
  • Group: System Environment/Base
  • Summary: GRUB - the Grand Unified Boot Loader.
  • Description:
    GRUB (Grand Unified Boot Loader) is an experimental boot loader
    capable of booting into most free operating systems - Linux, FreeBSD,
    NetBSD, GNU Mach, and others as well as most commercial operating
    systems.
    
  • No added dependencies
  • No removed dependencies
gthumb-2.7.8-5.el5 - gthumb-2.7.8-8.el5
  • Group: User Interface/X
  • Summary: Image viewer, editor, organizer
  • Description:
    gthumb is an application for viewing, editing, and organizing
    collections of images.
    
  • No added dependencies
  • No removed dependencies
gtk2-2.10.4-19.el5 - gtk2-2.10.4-20.el5
  • Group: System Environment/Libraries
  • Summary: The GIMP ToolKit (GTK+), a library for creating GUIs for X
  • Description:
    GTK+ is a multi-platform toolkit for creating graphical user
    interfaces. Offering a complete set of widgets, GTK+ is suitable for
    projects ranging from small one-off tools to complete application
    suites.
    
  • No added dependencies
  • No removed dependencies
gtkhtml3-3.12.0-1.fc6 - gtkhtml3-3.16.3-1.el5
  • Group: System Environment/Libraries
  • Summary: gtkhtml library
  • Description:
    GtkHTML is a lightweight HTML rendering/printing/editing engine. It
    was originally based on KHTMLW, but is now being developed
    independently of it.
    
  • Added Dependencies:
    • intltool >= 0.35.0
  • Removed Dependencies:
    • intltool
    • libgnomeprint22-devel >= 2.7.1
    • libgnomeprintui22-devel >= 2.7.1
gzip-1.3.5-9.el5 - gzip-1.3.5-10.el5
  • Group: Applications/File
  • Summary: The GNU data compression program.
  • Description:
    The gzip package contains the popular GNU gzip data compression
    program. Gzipped files have a .gz extension.
    
    Gzip should be installed on your Red Hat Linux system, because it is a
    very commonly used data compression program.
    
  • No added dependencies
  • No removed dependencies
hal-0.5.8.1-25.el5 - hal-0.5.8.1-35.el5
  • Group: System Environment/Libraries
  • Summary: Hardware Abstraction Layer
  • Description:
    
    HAL is daemon for collection and maintaining information from several
    sources about the hardware on the system. It provides a live device
    list through D-BUS.
    
  • No added dependencies
  • No removed dependencies
hal-cups-utils-0.6.2-5 - hal-cups-utils-0.6.2-5.2.el5
  • Group: Applications/System
  • Summary: Halified CUPS utilities
  • Description:
    Halified utilities for CUPS:
    - hal_lpadmin
    - hal CUPS backend
    
  • No added dependencies
  • No removed dependencies
hplip-1.6.7-4.1.el5 - hplip-1.6.7-4.1.el5_0.3
  • Group: System Environment/Daemons
  • Summary: HP Linux Imaging and Printing Project
  • Description:
    The Hewlett-Packard Linux Imaging and Printing Project provides
    drivers for HP printers and multi-function peripherals.
    
  • Added Dependencies:
    • openssl-devel
  • No removed dependencies
htdig-3.2.0b6-9.el5 - htdig-3.2.0b6-9.0.1.el5_1
  • Group: Applications/Internet
  • Summary: ht://Dig - Web search engine
  • Description:
    The ht://Dig system is a complete world wide web indexing and searching
    system for a small domain or intranet. This system is not meant to replace
    the need for powerful internet-wide search systems like Lycos, Infoseek,
    Webcrawler and AltaVista. Instead it is meant to cover the search needs for
    a single company, campus, or even a particular sub section of a web site. As
    opposed to some WAIS-based or web-server based search engines, ht://Dig can
    span several web servers at a site. The type of these different web servers
    doesn't matter as long as they understand the HTTP 1.0 protocol.
    ht://Dig is also used by KDE to search KDE's HTML documentation.
    
    ht://Dig was developed at San Diego State University as a way to search the
    various web servers on the campus network.
    
  • No added dependencies
  • No removed dependencies
htmlview-4.0.0-1.el5 - htmlview-4.0.0-2.el5
  • Group: Applications/Internet
  • Summary: Launcher of Preferred Web Browser
  • Description:
    htmlview and launchmail are tools for launching Preferred Applications.
    This package exists for compatibility reasons and is likely to be removed
    later when equivalent functionality is implemented elsewhere.
    
  • No added dependencies
  • No removed dependencies
httpd-2.2.3-11.el5 - httpd-2.2.3-11.el5_1.3
  • Group: System Environment/Daemons
  • Summary: Apache HTTP Server
  • Description:
    The Apache HTTP Server is a powerful, efficient, and extensible
    web server.
    
  • No added dependencies
  • No removed dependencies
hwbrowser-0.30-1.el5 - hwbrowser-0.30-2.el5
  • Group: Applications/System
  • Summary: A hardware browser.
  • Description:
    A browser for your current hardware configuration.
    
  • No added dependencies
  • No removed dependencies
hwdata-0.211-1 - hwdata-0.213.6-1.el5
  • Group: System Environment/Base
  • Summary: Hardware identification and configuration data
  • Description:
    hwdata contains various hardware identification and configuration data,
    such as the pci.ids database and MonitorsDb databases.
    
  • No added dependencies
  • No removed dependencies
ibutils-1.2-2.el5 - ibutils-1.2-3.el5
  • Group: System Environment/Libraries
  • Summary: OpenIB Mellanox InfiniBand Diagnostic Tools
  • Description:
    ibutils provides IB network and path diagnostics.
    
  • Added Dependencies:
    • libibumad-devel
  • No removed dependencies
icu-3.6-5.11 - icu-3.6-5.11.1
  • Group: System Environment/Libraries
  • Summary: International Components for Unicode
  • Description:
    The International Components for Unicode (ICU) libraries provide
    robust and full-featured Unicode services on a wide variety of
    platforms. ICU supports the most current version of the Unicode
    standard, and they provide support for supplementary Unicode
    characters (needed for GB 18030 repertoire support).
    As computing environments become more heterogeneous, software
    portability becomes more important. ICU lets you produce the same
    results across all the various platforms you support, without
    sacrificing performance. It offers great flexibility to extend and
    customize the supplied services.
    
  • No added dependencies
  • No removed dependencies
initscripts-8.45.17.EL-1 - initscripts-8.45.19.EL-1
  • Group: System Environment/Base
  • Summary: The inittab file and the /etc/init.d scripts.
  • Description:
    The initscripts package contains the basic system scripts used to boot
    your Red Hat system, change runlevels, and shut the system down
    cleanly. Initscripts also contains the scripts that activate and
    deactivate most network interfaces.
    
  • No added dependencies
  • No removed dependencies
iproute-2.6.18-4.el5 - iproute-2.6.18-7.el5
  • Group: Applications/System
  • Summary: Advanced IP routing and network device configuration tools.
  • Description:
    The iproute package contains networking utilities (ip and rtmon, for
    example) which are designed to use the advanced networking
    capabilities of the Linux 2.4.x and 2.6.x kernel.
    
  • No added dependencies
  • No removed dependencies
iprutils-2.2.6-1.el5 - iprutils-2.2.8-1.el5
  • Group: System Environment/Base
  • Summary: Utilities for the IBM Power Linux RAID adapters
  • Description:
    Provides a suite of utilities to manage and configure SCSI devices
    supported by the ipr SCSI storage device driver.
    
  • No added dependencies
  • No removed dependencies
ipsec-tools-0.6.5-8.el5 - ipsec-tools-0.6.5-9.el5
  • Group: System Environment/Base
  • Summary: Tools for configuring and using IPSEC
  • Description:
    This is the IPsec-Tools package. You need this package in order to
    really use the IPsec functionality in the linux-2.5+ kernels. This
    package builds:
    
    - setkey, a program to directly manipulate policies and SAs
    - racoon, an IKEv1 keying daemon
    
  • No added dependencies
  • No removed dependencies
iptables-1.3.5-1.2.1 - iptables-1.3.5-4.el5
  • Group: System Environment/Base
  • Summary: Tools for managing Linux kernel packet filtering capabilities.
  • Description:
    The iptables utility controls the network packet filtering code in the
    Linux kernel. If you need to set up firewalls and/or IP masquerading,
    you should install this package.
    
  • No added dependencies
  • No removed dependencies
irqbalance-0.55-6.el5 - irqbalance-0.55-10.el5
  • Group: System Environment/Base
  • Summary: IRQ balancing daemon.
  • Description:
    irqbalance is a daemon that evenly distributes IRQ load across
    multiple CPUs for enhanced performance.
    
  • No added dependencies
  • No removed dependencies
iscsi-initiator-utils-6.2.0.865-0.8.el5 - iscsi-initiator-utils-6.2.0.868-0.7.el5
  • Group: System Environment/Daemons
  • Summary: iSCSI daemon and utility programs
  • Description:
    The iscsi package provides the server daemon for the iSCSI protocol,
    as well as the utility programs used to manage it. iSCSI is a protocol
    for distributed disk access using SCSI commands sent over Internet
    Protocol networks.
    
  • Added Dependencies:
    • bison
    • flex
  • No removed dependencies
isdn4k-utils-3.2-50.1 - isdn4k-utils-3.2-51.el5
  • Group: Applications/System
  • Summary: Utilities for configuring an ISDN subsystem.
  • Description:
    The isdn4k-utils package contains a collection of utilities needed for
    configuring an ISDN subsystem.
    
  • No added dependencies
  • No removed dependencies
jakarta-commons-collections-3.1-6jpp.1 - jakarta-commons-collections-3.2-2jpp.3
  • Group: Development/Libraries/Java
  • Summary: Jakarta Commons Collections Package
  • Description:
    The introduction of the Collections API by Sun in JDK 1.2 has been a
    boon to quick and effective Java programming. Ready access to powerful
    data structures has accelerated development by reducing the need for
    custom container classes around each core object. Most Java2 APIs are
    significantly easier to use because of the Collections API.
    However, there are certain holes left unfilled by Sun's
    implementations, and the Jakarta-Commons Collections Component strives
    to fulfill them. Among the features of this package are:
    - special-purpose implementations of Lists and Maps for fast access
    - adapter classes from Java1-style containers (arrays, enumerations) to
    Java2-style collections.
    - methods to test or create typical set-theory properties of collections
    such as union, intersection, and closure.
    
  • Added Dependencies:
    • xml-commons-apis >= 1.3
  • No removed dependencies
java-1.4.2-gcj-compat-1.4.2.0-40jpp.112 - java-1.4.2-gcj-compat-1.4.2.0-40jpp.115
  • Group: Development/Languages
  • Summary: JPackage runtime scripts for GCJ
  • Description:
    This package installs directory structures, shell scripts and symbolic
    links to simulate a JPackage-compatible runtime environment with GCJ.
    
  • No added dependencies
  • No removed dependencies
kbd-1.12-19.el5 - kbd-1.12-20.el5
  • Group: System Environment/Base
  • Summary: Tools for configuring the console (keyboard, virtual terminals, etc.)
  • Description:
    The kbd package contains tools for managing a Linux
    system's console's behavior, including the keyboard, the screen
    fonts, the virtual terminals and font files.
    
  • No added dependencies
  • No removed dependencies
kdeadmin-3.5.4-2.fc6 - kdeadmin-3.5.4-3.el5
  • Group: User Interface/Desktops
  • Summary: Administrative tools for KDE.
  • Description:
    The kdeadmin package includes administrative tools for the K Desktop
    Environment (KDE) including:
    
    kcron - Crontab editor
    kdat - Tape backup tool
    kuser - Frontend for configuring users and user groups
    
  • No added dependencies
  • No removed dependencies
kdebase-3.5.4-13.6.el5 - kdebase-3.5.4-18.el5
  • Group: User Interface/Desktops
  • Summary: K Desktop Environment - core files
  • Description:
    Core applications for the K Desktop Environment. Included are: kdm
    (replacement for xdm), kwin (window manager), konqueror (filemanager,
    web browser, ftp client, ...), konsole (xterm replacement), kpanel
    (application starter and desktop pager), kaudio (audio server),
    kdehelp (viewer for kde help files, info and man pages), kthememgr
    (system for managing alternate theme packages) plus other KDE
    components (kcheckpass, kikbd, kscreensaver, kcontrol, kfind,
    kfontmanager, kmenuedit).
    
  • No added dependencies
  • No removed dependencies
kdelibs-3.5.4-13.el5 - kdelibs-3.5.4-16.el5
  • Group: System Environment/Libraries
  • Summary: K Desktop Environment - Libraries
  • Description:
    Libraries for the K Desktop Environment:
    KDE Libraries included: kdecore (KDE core library), kdeui (user interface),
    kfm (file manager), khtmlw (HTML widget), kio (Input/Output, networking),
    kspell (spelling checker), jscript (javascript), kab (addressbook),
    kimgio (image manipulation).
    
  • No added dependencies
  • No removed dependencies
kernel-2.6.18-53.el5 - kernel-2.6.18-92.el5
  • Group: System Environment/Kernel
  • Summary: The Linux kernel (the core of the Linux operating system)
  • Description:
    The kernel package contains the Linux kernel (vmlinuz), the core of any
    Linux operating system. The kernel handles the basic functions
    of the operating system: memory allocation, process allocation, device
    input and output, etc.
    
  • No added dependencies
  • No removed dependencies
kexec-tools-1.101-194.4.el5 - kexec-tools-1.102pre-21.el5
  • Group: Applications/System
  • Summary: The kexec/kdump userspace component.
  • Description:
    kexec-tools provides /sbin/kexec binary that facilitates a new
    kernel to boot using the kernel's kexec feature either on a
    normal or a panic reboot. This package contains the /sbin/kexec
    binary and ancillary utilities that together form the userspace
    component of the kernel's kexec feature.
    
  • No added dependencies
  • No removed dependencies
krb5-1.6.1-17.el5 - krb5-1.6.1-25.el5
  • Group: System Environment/Libraries
  • Summary: The Kerberos network authentication system.
  • Description:
    Kerberos V5 is a trusted-third-party network authentication system,
    which can improve your network's security by eliminating the insecure
    practice of cleartext passwords.
    
  • No added dependencies
  • No removed dependencies
ksh-20060214-1.4 - ksh-20060214-1.7
  • Group: Applications/Shells
  • Summary: The Original ATT Korn Shell
  • Description:
    KSH-93 is the most recent version of the KornShell by David Korn of
    AT&T Bell Laboratories.
    KornShell is a shell programming language, which is upward compatible
    with "sh" (the Bourne Shell).
    
  • No added dependencies
  • No removed dependencies
kudzu-1.2.57.1.15-1 - kudzu-1.2.57.1.17-1
  • Group: Applications/System
  • Summary: The Red Hat Linux hardware probing tool.
  • Description:
    Kudzu is a hardware probing tool run at system boot time to determine
    what hardware has been added or removed from the system.
    
  • No added dependencies
  • No removed dependencies
lam-7.1.2-8.fc6 - lam-7.1.2-14.el5
  • Group: Development/Libraries
  • Summary: The LAM (Local Area Multicomputer) programming environment.
  • Description:
    LAM (Local Area Multicomputer) is an Message-Passing Interface (MPI)
    programming environment and development system for heterogeneous
    computers on a network. With LAM/MPI, a dedicated cluster or an
    existing network computing infrastructure can act as one parallel
    computer to solve one problem. LAM/MPI is considered to be "cluster
    friendly" because it offers daemon-based process startup/control as
    well as fast client-to-client message passing protocols. LAM/MPI can
    use TCP/IP and/or shared memory for message passing (different RPMs
    are supplied for this -- see the main LAM website at
    http://www.mpi.nd.edu/lam/ for details).<
    
    LAM features a full implementation of MPI version 1 (with the
    exception that LAM does not support cancelling of sends), and much of
    version 2. Compliant applications are source code portable between LAM
    and any other implementation of MPI. In addition to meeting the
    standard, LAM/MPI offers extensive monitoring capabilities to support
    debugging. Monitoring happens on two levels: On one level, LAM/MPI has
    the hooks to allow a snapshot of a process and message status to be
    taken at any time during an application run. The status includes all
    aspects of synchronization plus datatype map/signature, communicator
    group membership and message contents (see the XMPI application on the
    main LAM website). On the second level, the MPI library can produce a
    cumulative record of communication, which can be visualized either at
    runtime or post-mortem.
    
  • No added dependencies
  • No removed dependencies
libX11-1.0.3-8.0.1.el5 - libX11-1.0.3-9.el5
  • Group: System Environment/Libraries
  • Summary: X.Org X11 libX11 runtime library
  • Description:
    X.Org X11 libX11 runtime library
    
  • No added dependencies
  • No removed dependencies
libXfont-1.2.2-1.0.2.el5 - libXfont-1.2.2-1.0.3.el5_1
  • Group: System Environment/Libraries
  • Summary: X.Org X11 libXfont runtime library
  • Description:
    X.Org X11 libXfont runtime library
    
  • No added dependencies
  • No removed dependencies
libao-0.8.6-5 - libao-0.8.6-7
  • Group: System Environment/Libraries
  • Summary: Cross Platform Audio Output Library.
  • Description:
    Libao is a cross platform audio output library. It currently supports
    ESD, OSS, Solaris, and IRIX.
    
  • No added dependencies
  • No removed dependencies
libchewing-0.3.0-7.el5 - libchewing-0.3.0-8.el5
  • Group: System Environment/Libraries
  • Summary: Intelligent phonetic input method library for Traditional Chinese
  • Description:
    libchewing is an intelligent phonetic input method library for Chinese.
    
    It provides the core algorithm and logic that can be used by various
    input methods. The Chewing input method is a smart bopomofo phonetics
    input method that is useful for inputting Mandarin Chinese.
    
  • No added dependencies
  • No removed dependencies
libdhcp-1.20-2.el5 - libdhcp-1.20-5.el5
  • Group: Development/Libraries
  • Summary: A library for network interface configuration with DHCP
  • Description:
    libdhcp enables programs to invoke and control the Dynamic Host Configuration
    Protocol (DHCP) clients: the Internet Software Consortium (ISC) IPv4 DHCP
    client library, libdhcp4client, and the IPv6 DHCPv6 client library,
    libdhcp6client, and provides Network Interface Configuration (NIC) services
    for network parameter autoconfiguration with DHCP.
    
  • Added Dependencies:
    • dhcp-devel >= 12:3.0.5-13
    • libdhcp4client-devel >= 12:3.0.5-13
    • libdhcp6client-devel >= 1.0.9-1
  • Removed Dependencies:
    • dhcp-devel
    • libdhcp4client-devel >= 12:3.0.4-17
    • libdhcp6client-devel
liberation-fonts-0.2-2.el5 - liberation-fonts-1.0-1.el5
  • Group: User Interface/X
  • Summary: Fonts to replace commonly used Microsoft Windows Fonts
  • Description:
    The Liberation Fonts are intended to be replacements for the three
    most commonly used fonts on Microsoft systems: Times New Roman,
    Arial, and Courier New.
    
  • No added dependencies
  • No removed dependencies
libexif-0.6.13-4.0.2.el5 - libexif-0.6.13-4.0.2.el5_1.1
  • Group: System Environment/Libraries
  • Summary: Library for extracting extra information from image files
  • Description:
    Most digital cameras produce EXIF files, which are JPEG files with
    extra tags that contain information about the image. The EXIF library
    allows you to parse an EXIF file and read the data from those tags.
    
  • No added dependencies
  • No removed dependencies
libgnomeprint22-2.12.1-9.el5 - libgnomeprint22-2.12.1-10.el5
  • Group: System Environment/Base
  • Summary: Printing library for GNOME.
  • Description:
    GNOME (GNU Network Object Model Environment) is a user-friendly set of
    applications and desktop tools to be used in conjunction with a window
    manager for the X Window System. The gnome-print package contains
    libraries and fonts needed by GNOME applications for printing.
    
    You should install the gnome-print package if you intend to use any of
    the GNOME applications that can print. If you would like to develop
    GNOME applications that can print you will also need to install the
    gnome-print devel package.
    
  • No added dependencies
  • No removed dependencies
libhugetlbfs-1.0.1-1.el5 - libhugetlbfs-1.2-5.el5
  • Group: System Environment/Libraries
  • Summary: Library to access the Huge TLB Filesystem
  • Description:
    The libhugetlbfs library interacts with the Linux hugetlbfs to make large pages
    available to applications in a transparent manner.
    
  • No added dependencies
  • No removed dependencies
libica-1.3.7-5.el5 - libica-1.3.7-7.el5
  • Group: System Environment/Libraries
  • Summary: A library of functions for accessing ICA hardware crypto on IBM zSeries
  • Description:
    A library of functions for accessing ICA hardware crypto on IBM zSeries
    
  • Added Dependencies:
    • autoconf
    • automake
    • libtool
  • No removed dependencies
libnl-1.0-0.10.pre5.4 - libnl-1.0-0.10.pre5.5
  • Group: Development/Libraries
  • Summary: Convenience library for kernel netlink sockets
  • Description:
    This package contains a convenience library to simplify
    using the Linux kernel's netlink sockets interface for
    network manipulation
    
  • No added dependencies
  • No removed dependencies
libpng-1.2.10-7.0.2 - libpng-1.2.10-7.1.el5_0.1
  • Group: System Environment/Libraries
  • Summary: A library of functions for manipulating PNG image format files
  • Description:
    The libpng package contains a library of functions for creating and
    manipulating PNG (Portable Network Graphics) image format files. PNG
    is a bit-mapped graphics format similar to the GIF format. PNG was
    created to replace the GIF format, since GIF uses a patented data
    compression algorithm.
    
    Libpng should be installed if you need to manipulate PNG format image
    files.
    
  • No added dependencies
  • No removed dependencies
libraw1394-1.2.1-1.fc6 - libraw1394-1.3.0-1.el5
  • Group: System Environment/Libraries
  • Summary: Library providing low-level IEEE-1394 access
  • Description:
    The libraw1394 library provides direct access to the IEEE-1394 bus through
    the Linux 1394 subsystem's raw1394 user space interface.
    
  • Added Dependencies:
    • autoconf
    • automake
    • libtool
  • No removed dependencies
librtas-1.2.4-3.el5 - librtas-1.3.3-1.el5
  • Group: System Environment/Libraries
  • Summary: Libraries to provide access to RTAS calls and RTAS events
  • Description:
    The librtas shared library provides userspace with an interface
    through which certain RTAS calls can be made. The library uses
    either of the RTAS User Module or the RTAS system call to direct
    the kernel in making these calls.
    
    The librtasevent shared library provides users with a set of
    definitions and common routines useful in parsing and dumping
    the contents of RTAS events.
    
  • No added dependencies
  • No removed dependencies
libselinux-1.33.4-4.el5 - libselinux-1.33.4-5.el5
  • Group: System Environment/Libraries
  • Summary: SELinux library and simple utilities
  • Description:
    Security-enhanced Linux is a feature of the Linux® kernel and a number
    of utilities with enhanced security functionality designed to add
    mandatory access controls to Linux. The Security-enhanced Linux
    kernel contains new architectural components originally developed to
    improve the security of the Flask operating system. These
    architectural components provide general support for the enforcement
    of many kinds of mandatory access control policies, including those
    based on the concepts of Type Enforcement®, Role-based Access
    Control, and Multi-level Security.
    
    libselinux provides an API for SELinux applications to get and set
    process and file security contexts and to obtain security policy
    decisions. Required for any applications that use the SELinux API.
    
  • No added dependencies
  • No removed dependencies
libuser-0.54.7-2.el5.2 - libuser-0.54.7-2.el5.5
  • Group: System Environment/Base
  • Summary: A user and group account administration library.
  • Description:
    The libuser library implements a standardized interface for manipulating
    and administering user and group accounts. The library uses pluggable
    back-ends to interface to its data sources.
    
    Sample applications modeled after those included with the shadow password
    suite are included.
    
  • No added dependencies
  • No removed dependencies
libvirt-0.2.3-9.el5 - libvirt-0.3.3-7.el5
  • Group: Development/Libraries
  • Summary: Library providing a simple API virtualization
  • Description:
    Libvirt is a C toolkit to interract with the virtualization capabilities
    of recent versions of Linux (and other OSes).
    
  • Added Dependencies:
    • avahi-devel
    • bridge-utils
    • dnsmasq
    • gnutls-devel
  • Removed Dependencies:
    • /sbin/iptables
    • libsysfs-devel
libxml2-2.6.26-2.1.2 - libxml2-2.6.26-2.1.2.1
  • Group: Development/Libraries
  • Summary: Library providing XML and HTML support
  • Description:
    This library allows to manipulate XML files. It includes support
    to read, modify and write XML and HTML files. There is DTDs support
    this includes parsing and validation even with complex DtDs, either
    at parse time or later once the document has been modified. The output
    can be a simple SAX stream or and in-memory DOM like representations.
    In this case one can use the built-in XPath and XPointer implementation
    to select subnodes or ranges. A flexible Input/Output mechanism is
    available, with existing HTTP and FTP modules and combined to an
    URI library.
    
  • No added dependencies
  • No removed dependencies
logrotate-3.7.4-7 - logrotate-3.7.4-8
  • Group: System Environment/Base
  • Summary: Rotates, compresses, removes and mails system log files.
  • Description:
    The logrotate utility is designed to simplify the administration of
    log files on a system which generates a lot of log files. Logrotate
    allows for the automatic rotation compression, removal and mailing of
    log files. Logrotate can be set to handle a log file daily, weekly,
    monthly or when the log file gets to a certain size. Normally,
    logrotate runs as a daily cron job.
    
    Install the logrotate package if you need a utility to deal with the
    log files on your system.
    
  • No added dependencies
  • No removed dependencies
logwatch-7.3-5 - logwatch-7.3-6.el5
  • Group: Applications/System
  • Summary: A log file analysis program
  • Description:
    Logwatch is a customizable, pluggable log-monitoring system. It will go
    through your logs for a given period of time and make a report in the areas
    that you wish with the detail that you wish. Easy to use - works right out
    of the package on many systems.
    
  • No added dependencies
  • No removed dependencies
ltrace-0.5-6.45svn.fc6 - ltrace-0.5-7.45svn.el5
  • Group: Development/Debuggers
  • Summary: Tracks runtime library calls from dynamically linked executables.
  • Description:
    Ltrace is a debugging program which runs a specified command until the
    command exits. While the command is executing, ltrace intercepts and
    records both the dynamic library calls called by the executed process
    and the signals received by the executed process. Ltrace can also
    intercept and print system calls executed by the process.
    
    You should install ltrace if you need a sysadmin tool for tracking the
    execution of processes.
    
  • No added dependencies
  • No removed dependencies
lvm2-2.02.26-3.el5 - lvm2-2.02.32-4.el5
  • Group: System Environment/Base
  • Summary: Userland logical volume management tools
  • Description:
    LVM2 includes all of the support for handling read/write operations on
    physical volumes (hard disks, RAID-Systems, magneto optical, etc.,
    multiple devices (MD), see mdadd(8) or even loop devices, see
    losetup(8)), creating volume groups (kind of virtual disks) from one
    or more physical volumes and creating one or more logical volumes
    (kind of logical partitions) in volume groups.
    
  • Added Dependencies:
    • device-mapper >= 1.02.24-1
  • Removed Dependencies:
    • device-mapper >= 1.02.20-1
lvm2-cluster-2.02.26-1.el5 - lvm2-cluster-2.02.32-4.el5
  • Group: System Environment/Base
  • Summary: Cluster extensions for userland logical volume management tools
  • Description:
    Extensions to LVM2 to support clusters.
    
  • Added Dependencies:
    • device-mapper >= 1.02.24-1
  • Removed Dependencies:
    • device-mapper >= 1.02.20-1
m17n-db-1.3.3-46.el5 - m17n-db-1.3.3-48.el5
  • Group: System Environment/Libraries
  • Summary: Multilingualization datafiles for m17n-lib
  • Description:
    This package contains multilingualization (m17n) datafiles for m17n-lib
    which describe input maps, encoding maps, and OpenType font data
    for many languages.
    
  • No added dependencies
  • No removed dependencies
m2crypto-0.16-6.el5.1 - m2crypto-0.16-6.el5.2
  • Group: System Environment/Libraries
  • Summary: Support for using OpenSSL in python scripts
  • Description:
    This package allows you to call OpenSSL functions from python scripts.
    
  • No added dependencies
  • No removed dependencies
mailman-2.1.9-2 - mailman-2.1.9-4.el5
  • Group: Applications/Internet
  • Summary: Mailing list manager with built in Web access.
  • Description:
    Mailman is software to help manage email discussion lists, much like
    Majordomo and Smartmail. Unlike most similar products, Mailman gives
    each mailing list a webpage, and allows users to subscribe,
    unsubscribe, etc. over the Web. Even the list manager can administer
    his or her list entirely from the Web. Mailman also integrates most
    things people want to do with mailing lists, including archiving, mail
    <-> news gateways, and so on.
    
    Documentation can be found in: /usr/share/doc/mailman-2.1.9
    
    When the package has finished installing, you will need to perform some
    additional installation steps, these are described in:
    /usr/share/doc/mailman-2.1.9/INSTALL.REDHAT
    
  • No added dependencies
  • No removed dependencies
make-3.81-1.1 - make-3.81-3.el5
  • Group: Development/Tools
  • Summary: A GNU tool which simplifies the build process for users.
  • Description:
    A GNU tool for controlling the generation of executables and other
    non-source files of a program from the program's source files. Make
    allows users to build and install packages without any significant
    knowledge about the details of the build process. The details about
    how the program should be built are provided for make in the program's
    makefile.
    
    The GNU make tool should be installed on your system because it is
    commonly used to simplify the process of installing programs.
    
  • No added dependencies
  • No removed dependencies
man-pages-ja-20060815-5 - man-pages-ja-20060815-6.el5
  • Group: Documentation
  • Summary: Japanese man (manual) pages from the Japanese Manual Project
  • Description:
    Japanese Manual pages, translated by JM-Project (Japanese Manual Project).
    
  • No added dependencies
  • No removed dependencies
mcstrans-0.2.6-1.el5 - mcstrans-0.2.7-1.el5
  • Group: System Environment/Daemons
  • Summary: SELinux Translation Daemon
  • Description:
    Security-enhanced Linux is a feature of the Linux® kernel and a number
    of utilities with enhanced security functionality designed to add
    mandatory access controls to Linux. The Security-enhanced Linux
    kernel contains new architectural components originally developed to
    improve the security of the Flask operating system. These
    architectural components provide general support for the enforcement
    of many kinds of mandatory access control policies, including those
    based on the concepts of Type Enforcement®, Role-based Access
    Control, and Multi-level Security.
    
    mcstrans provides an translation daemon to translate SELinux categories
    from internal representations to user defined representation.
    
  • No added dependencies
  • No removed dependencies
mdadm-2.5.4-3.el5 - mdadm-2.6.4-1.el5
  • Group: System Environment/Base
  • Summary: mdadm controls Linux md devices (software RAID arrays)
  • Description:
    mdadm is used to create, manage, and monitor Linux MD (software RAID)
    devices. As such, it provides similar functionality to the raidtools
    package. However, mdadm is a single program, and it can perform
    almost all functions without a configuration file, though a configuration
    file can be used to help with some common tasks.
    
  • No added dependencies
  • No removed dependencies
metacity-2.16.0-8.el5 - metacity-2.16.0-10.el5
  • Group: User Interface/Desktops
  • Summary: Metacity window manager
  • Description:
    
    Metacity is a simple window manager that integrates nicely with
    GNOME 2.
    
  • No added dependencies
  • No removed dependencies
microcode_ctl-1.17-1.42.el5 - microcode_ctl-1.17-1.47.el5
  • Group: System Environment/Base
  • Summary: Tool to update x86/x86-64 CPU microcode.
  • Description:
    microcode_ctl - updates the microcode on Intel x86/x86-64 CPU's
    
  • No added dependencies
  • No removed dependencies
mkinitrd-5.1.19.6-19 - mkinitrd-5.1.19.6-28
  • Group: System Environment/Base
  • Summary: Creates an initial ramdisk image for preloading modules.
  • Description:
    Mkinitrd creates filesystem images for use as initial ramdisk (initrd)
    images. These ramdisk images are often used to preload the block
    device modules (SCSI or RAID) needed to access the root filesystem.
    
    In other words, generic kernels can be built without drivers for any
    SCSI adapters which load the SCSI driver as a module. Since the
    kernel needs to read those modules, but in this case it isn't able to
    address the SCSI adapter, an initial ramdisk is used. The initial
    ramdisk is loaded by the operating system loader (normally LILO) and
    is available to the kernel as soon as the ramdisk is loaded. The
    ramdisk image loads the proper SCSI adapter and allows the kernel to
    mount the root filesystem. The mkinitrd program creates such a
    ramdisk using information found in the /etc/modules.conf file.
    
  • No added dependencies
  • No removed dependencies
module-init-tools-3.3-0.pre3.1.34.el5 - module-init-tools-3.3-0.pre3.1.37.el5
  • Group: System Environment/Kernel
  • Summary: Kernel module management utilities.
  • Description:
    The modutils package includes various programs needed for automatic
    loading and unloading of modules under 2.6 and later kernels, as well
    as other module management programs. Device drivers and filesystems
    are two examples of loaded and unloaded modules.
    
  • No added dependencies
  • No removed dependencies
mozldap-6.0.4-1.el5 - mozldap-6.0.5-1.el5
  • Group: System Environment/Libraries
  • Summary: Mozilla LDAP C SDK
  • Description:
    The Mozilla LDAP C SDK is a set of libraries that
    allow applications to communicate with LDAP directory
    servers. These libraries are derived from the University
    of Michigan and Netscape LDAP libraries. They use Mozilla
    NSPR and NSS for crypto.
    
  • No added dependencies
  • No removed dependencies
mysql-5.0.22-2.1.0.1 - mysql-5.0.45-7.el5
  • Group: Applications/Databases
  • Summary: MySQL client programs and shared libraries.
  • Description:
    MySQL is a multi-user, multi-threaded SQL database server. MySQL is a
    client/server implementation consisting of a server daemon (mysqld)
    and many different client programs and libraries. The base package
    contains the MySQL client programs, the client shared libraries, and
    generic MySQL files.
    
  • Added Dependencies:
    • gawk
  • No removed dependencies
nautilus-2.16.2-6.el5 - nautilus-2.16.2-7.el5
  • Group: User Interface/Desktops
  • Summary: Nautilus is a file manager for GNOME.
  • Description:
    Nautilus integrates access to files, applications, media,
    Internet-based resources and the Web. Nautilus delivers a dynamic and
    rich user experience. Nautilus is an free software project developed
    under the GNU General Public License and is a core component of the
    GNOME desktop project.
    
  • No added dependencies
  • No removed dependencies
net-snmp-5.3.1-19.el5 - net-snmp-5.3.1-24.el5
  • Group: System Environment/Daemons
  • Summary: A collection of SNMP protocol tools and libraries.
  • Description:
    SNMP (Simple Network Management Protocol) is a protocol used for
    network management. The NET-SNMP project includes various SNMP tools:
    an extensible agent, an SNMP library, tools for requesting or setting
    information from SNMP agents, tools for generating and handling SNMP
    traps, a version of the netstat command which uses SNMP, and a Tk/Perl
    mib browser. This package contains the snmpd and snmptrapd daemons,
    documentation, etc.
    
    You will probably also want to install the net-snmp-utils package,
    which contains NET-SNMP utilities.
    
    Building option:
    --without tcp_wrappers : disable tcp_wrappers support
    
  • No added dependencies
  • No removed dependencies
net-tools-1.60-73 - net-tools-1.60-78.el5
  • Group: System Environment/Base
  • Summary: Basic networking tools.
  • Description:
    The net-tools package contains basic networking tools, including
    ifconfig, netstat, route, and others.
    
  • No added dependencies
  • No removed dependencies
newt-0.52.2-9 - newt-0.52.2-10.el5
  • Group: System Environment/Libraries
  • Summary: A development library for text mode user interfaces.
  • Description:
    Newt is a programming library for color text mode, widget based user
    interfaces. Newt can be used to add stacked windows, entry widgets,
    checkboxes, radio buttons, labels, plain text fields, scrollbars,
    etc., to text mode user interfaces. This package also contains the
    shared library needed by programs built with newt, as well as a
    /usr/bin/dialog replacement called whiptail. Newt is based on the
    slang library.
    
  • No added dependencies
  • No removed dependencies
nfs-utils-1.0.9-24.el5 - nfs-utils-1.0.9-33.el5
  • Group: System Environment/Daemons
  • Summary: NFS utilities and supporting clients and daemons for the kernel NFS server.
  • Description:
    The nfs-utils package provides a daemon for the kernel NFS server and
    related tools, which provides a much higher level of performance than the
    traditional Linux NFS server used by most users.
    
    This package also contains the showmount program. Showmount queries the
    mount daemon on a remote host for information about the NFS (Network File
    System) server on the remote host. For example, showmount can display the
    clients which are mounted on that host.
    
    This package also contains the mount.nfs and umount.nfs program.
    
  • No added dependencies
  • No removed dependencies
notification-daemon-0.3.5-8.el5 - notification-daemon-0.3.5-9.el5
  • Group: System Environment/Libraries
  • Summary: Notification Daemon
  • Description:
    notification-daemon is the server implementation of the freedesktop.org desktop
    notification specification.
    
  • No added dependencies
  • No removed dependencies
nspr-4.6.5-3.el5 - nspr-4.7.0.99.2-1.el5
  • Group: System Environment/Libraries
  • Summary: Netscape Portable Runtime
  • Description:
    NSPR provides platform independence for non-GUI operating system
    facilities. These facilities include threads, thread synchronization,
    normal file and network I/O, interval timing and calendar time, basic
    memory management (malloc and free) and shared library linking.
    
  • No added dependencies
  • No removed dependencies
nss-3.11.7-1.3.el5 - nss-3.11.99.5-2.el5
  • Group: System Environment/Libraries
  • Summary: Network Security Services
  • Description:
    Network Security Services (NSS) is a set of libraries designed to
    support cross-platform development of security-enabled client and
    server applications. Applications built with NSS can support SSL v2
    and v3, TLS, PKCS #5, PKCS #7, PKCS #11, PKCS #12, S/MIME, X.509
    v3 certificates, and other security standards.
    
  • Added Dependencies:
    • nspr-devel >= 4.6.99
  • Removed Dependencies:
    • nspr-devel >= 4.6.2
nss_db-2.2-35.1 - nss_db-2.2-35.3
  • Group: System Environment/Libraries
  • Summary: An NSS library for the Berkeley DB.
  • Description:
    Nss_db is a set of C library extensions which allow Berkeley Databases
    to be used as a primary source of aliases, ethers, groups, hosts,
    networks, protocol, users, RPCs, services, and shadow passwords
    (instead of or in addition to using flat files or NIS). Install nss_db
    if your flat name service files are too large and lookups are slow.
    
  • No added dependencies
  • No removed dependencies
nss_ldap-253-5.el5 - nss_ldap-253-12.el5
  • Group: System Environment/Base
  • Summary: NSS library and PAM module for LDAP.
  • Description:
    This package includes two LDAP access clients: nss_ldap and pam_ldap.
    Nss_ldap is a set of C library extensions that allow X.500 and LDAP
    directory servers to be used as a primary source of aliases, ethers,
    groups, hosts, networks, protocol, users, RPCs, services, and shadow
    passwords (instead of or in addition to using flat files or NIS).
    
    Pam_ldap is a module for Linux-PAM that supports password changes, V2
    clients, Netscape's SSL, ypldapd, Netscape Directory Server password
    policies, access authorization, and crypted hashes.
    
  • Added Dependencies:
    • keyutils-libs-devel
    • libselinux-devel
  • No removed dependencies
ntp-4.2.2p1-7.el5 - ntp-4.2.2p1-8.el5
  • Group: System Environment/Daemons
  • Summary: Synchronizes system time using the Network Time Protocol (NTP).
  • Description:
    The Network Time Protocol (NTP) is used to synchronize a computer's
    time with another reference time source. The ntp package contains
    utilities and daemons that will synchronize your computer's time to
    Coordinated Universal Time (UTC) via the NTP protocol and NTP servers.
    The ntp package includes ntpdate (a program for retrieving the date
    and time from remote machines via a network) and ntpd (a daemon which
    continuously adjusts system time).
    
    Install the ntp package if you need tools for keeping your system's
    time synchronized via the NTP protocol.
    
  • Added Dependencies:
    • perl-HTML-Parser
  • No removed dependencies
oddjob-0.27-7 - oddjob-0.27-9.el5
  • Group: System Environment/Daemons
  • Summary: A D-BUS service which runs odd jobs on behalf of client applications
  • Description:
    oddjob is a D-BUS service which performs particular tasks for clients which
    connect to it and issue requests using the system-wide message bus.
    
  • No added dependencies
  • No removed dependencies
openCryptoki-2.2.4-16.el5 - openCryptoki-2.2.4-21.el5
  • Group: Productivity/Security
  • Summary: Implementation of Cryptoki v2.11 for IBM Crypto Hardware
  • Description:
    The PKCS#11 Version 2.11 api implemented for the IBM Crypto cards.
    This package includes support for the IBM 4758 Cryptographic
    CoProcessor (with the PKCS#11 firmware loaded) and the IBM eServer
    Cryptographic Accelerator (FC 4960 on pSeries)
    
  • Added Dependencies:
    • trousers-devel
  • No removed dependencies
openais-0.80.3-7.el5 - openais-0.80.3-15.el5
  • Group: System Environment/Base
  • Summary: The openais Standards-Based Cluster Framework executive and APIs
  • Description:
    This package contains the openais executive, openais service handlers,
    default configuration files and init script.
    
  • No added dependencies
  • No removed dependencies
openhpi-2.8.1-2.el5.7 - openhpi-2.10.2-1.el5
  • Group: System Environment/Base
  • Summary: openhpi Hardware Platform Interface (HPI) library and tools
  • Description:
    OpenHPI is an open source project created with the intent of providing an
    implementation of the SA Forum's Hardware Platform Interface (HPI). HPI
    provides an abstracted interface to managing computer hardware, typically for
    chassis and rack based servers. HPI includes resource modeling; access to and
    control over sensor, control, watchdog, and inventory data associated with
    resources; abstracted System Event Log interfaces; hardware events and alerts;
    and a managed hotswap interface.
    
    OpenHPI provides a modular mechanism for adding new hardware and device support
    easily. Many plugins exist in the OpenHPI source tree to provide access to
    various types of hardware. This includes, but is not limited to, IPMI based
    servers, Blade Center, and machines which export data via sysfs.
    
  • No added dependencies
  • No removed dependencies
openib-1.2-6.el5 - openib-1.3-3.el5
  • Group: System Environment/Base
  • Summary: OpenIB Infiniband Driver Stack
  • Description:
    User space initialization scripts for the kernel InfiniBand drivers
    
  • No added dependencies
  • Removed Dependencies:
    • autoconf
    • automake
    • libsysfs-devel
    • libtool
    • pciutils-devel
    • zlib-devel
openldap-2.3.27-8 - openldap-2.3.27-8.el5_1.3
  • Group: System Environment/Daemons
  • Summary: The configuration files, libraries, and documentation for OpenLDAP.
  • Description:
    OpenLDAP is an open source suite of LDAP (Lightweight Directory Access
    Protocol) applications and development tools. LDAP is a set of
    protocols for accessing directory services (usually phone book style
    information, but other information is possible) over the Internet,
    similar to the way DNS (Domain Name System) information is propagated
    over the Internet. The openldap package contains configuration files,
    libraries, and documentation for OpenLDAP.
    
  • No added dependencies
  • No removed dependencies
openmotif-2.3.0-0.3.el5 - openmotif-2.3.0-0.5.el5
  • Group: System Environment/Libraries
  • Summary: Open Motif runtime libraries and executables.
  • Description:
    This is the Open Motif 2.3.0 runtime environment. It includes the
    Motif shared libraries, needed to run applications which are dynamically
    linked against Motif, and the Motif Window Manager "mwm".
    
  • No added dependencies
  • No removed dependencies
openmpi-1.2.3-4.el5 - openmpi-1.2.5-5.el5
  • Group: Development/Libraries
  • Summary: Open Message Passing Interface
  • Description:
    Open MPI is an open source, freely available implementation of both the
    MPI-1 and MPI-2 standards, combining technologies and resources from
    several other projects (FT-MPI, LA-MPI, LAM/MPI, and PACX-MPI) in
    order to build the best MPI library available. A completely new MPI-2
    compliant implementation, Open MPI offers advantages for system and
    software vendors, application developers, and computer science
    researchers. For more information, see http://www.open-mpi.org/ .
    
  • No added dependencies
  • No removed dependencies
openssh-4.3p2-24.el5 - openssh-4.3p2-26.el5
  • Group: Applications/Internet
  • Summary: The OpenSSH implementation of SSH protocol versions 1 and 2
  • Description:
    SSH (Secure SHell) is a program for logging into and executing
    commands on a remote machine. SSH is intended to replace rlogin and
    rsh, and to provide secure encrypted communications between two
    untrusted hosts over an insecure network. X11 connections and
    arbitrary TCP/IP ports can also be forwarded over the secure channel.
    
    OpenSSH is OpenBSD's version of the last free version of SSH, bringing
    it up to date in terms of security and features, as well as removing
    all patented algorithms to separate libraries.
    
    This package includes the core files necessary for both the OpenSSH
    client and server. To make this package useful, you should also
    install openssh-clients, openssh-server, or both.
    
  • No added dependencies
  • No removed dependencies
openssl-0.9.8b-8.3.el5_0.2 - openssl-0.9.8b-10.el5
  • Group: System Environment/Libraries
  • Summary: The OpenSSL toolkit
  • Description:
    The OpenSSL toolkit provides support for secure communications between
    machines. OpenSSL includes a certificate management tool and shared
    libraries which provide various cryptographic algorithms and
    protocols.
    
  • No added dependencies
  • No removed dependencies
oprofile-0.9.2-6.el5 - oprofile-0.9.3-16.el5
  • Group: Development/System
  • Summary: System wide profiler
  • Description:
    OProfile is a profiling system for systems running Linux. The
    profiling runs transparently during the background, and profile data
    can be collected at any time. OProfile makes use of the hardware performance
    counters provided on Intel P6, and AMD Athlon family processors, and can use
    the RTC for profiling on other x86 processor types.
    
    See the HTML documentation for further details.
    
  • No added dependencies
  • No removed dependencies
pam-0.99.6.2-3.26.el5 - pam-0.99.6.2-3.27.el5
  • Group: System Environment/Base
  • Summary: A security tool which provides authentication for applications
  • Description:
    PAM (Pluggable Authentication Modules) is a system security tool that
    allows system administrators to set authentication policy without
    having to recompile programs that handle authentication.
    
  • No added dependencies
  • No removed dependencies
parted-1.8.1-12.el5 - parted-1.8.1-17.el5
  • Group: Applications/System
  • Summary: The GNU disk partition manipulation program
  • Description:
    The GNU Parted program allows you to create, destroy, resize, move,
    and copy hard disk partitions. Parted can be used for creating space
    for new operating systems, reorganizing disk usage, and copying data
    to new hard disks.
    
  • No added dependencies
  • No removed dependencies
pciutils-2.2.3-4 - pciutils-2.2.3-5
  • Group: Applications/System
  • Summary: PCI bus related utilities.
  • Description:
    The pciutils package contains various utilities for inspecting and
    setting devices connected to the PCI bus. The utilities provided
    require kernel version 2.1.82 or newer (which support the
    /proc/bus/pci interface).
    
  • No added dependencies
  • No removed dependencies
pcre-6.6-1.1 - pcre-6.6-2.el5_1.7
  • Group: System Environment/Libraries
  • Summary: Perl-compatible regular expression library
  • Description:
    Perl-compatible regular expression library.
    PCRE has its own native API, but a set of "wrapper" functions that are based on
    the POSIX API are also supplied in the library libpcreposix. Note that this
    just provides a POSIX calling interface to PCRE: the regular expressions
    themselves still follow Perl syntax and semantics. The header file
    for the POSIX-style functions is called pcreposix.h.
    
  • No added dependencies
  • No removed dependencies
pcsc-lite-1.3.1-7 - pcsc-lite-1.4.4-0.1.el5
  • Group: System Environment/Daemons
  • Summary: PC/SC Lite smart card framework and applications
  • Description:
    The purpose of PC/SC Lite is to provide a Windows(R) SCard interface
    in a very small form factor for communicating to smartcards and
    readers. PC/SC Lite uses the same winscard API as used under
    Windows(R). This package includes the PC/SC Lite daemon, a resource
    manager that coordinates communications with smart card readers and
    smart cards that are connected to the system, as well as other command
    line tools.
    
  • No added dependencies
  • No removed dependencies
perl-5.8.8-10 - perl-5.8.8-10.el5_0.2
  • Group: Development/Languages
  • Summary: The Perl programming language
  • Description:
    Perl is a high-level programming language with roots in C, sed, awk
    and shell scripting. Perl is good at handling processes and files,
    and is especially good at handling text. Perl's hallmarks are
    practicality and efficiency. While it is used to do a lot of
    different things, Perl's most common applications are system
    administration utilities and web programming. A large proportion of
    the CGI scripts on the web are written in Perl. You need the perl
    package installed on your system so that your system can handle Perl
    scripts.
    
    Install this package if you want to program in Perl or enable your
    system to handle Perl scripts.
    
  • No added dependencies
  • No removed dependencies
php-5.1.6-15.el5 - php-5.1.6-20.el5
  • Group: Development/Languages
  • Summary: The PHP HTML-embedded scripting language. (PHP: Hypertext Preprocessor)
  • Description:
    PHP is an HTML-embedded scripting language. PHP attempts to make it
    easy for developers to write dynamically generated webpages. PHP also
    offers built-in database integration for several commercial and
    non-commercial database management systems, so writing a
    database-enabled webpage with PHP is fairly simple. The most common
    use of PHP coding is probably as a replacement for CGI scripts.
    
    The php package contains the module which adds support for the PHP
    language to Apache HTTP Server.
    
  • No added dependencies
  • No removed dependencies
php-pear-1.4.9-4 - php-pear-1.4.9-4.el5.1
  • Group: System
  • Summary: PHP Extension and Application Repository framework
  • Description:
    PEAR is a framework and distribution system for reusable PHP
    components. This package contains the basic PEAR components.
    
  • No added dependencies
  • No removed dependencies
piranha-0.8.4-7.el5 - piranha-0.8.4-9.3.el5
  • Group: System Environment/Base
  • Summary: Cluster administation tools
  • Description:
    Various tools to administer and configure the Linux Virtual Server as well as
    heartbeating and failover components. The LVS is a dynamically adjusted
    kernel routing mechanism that provides load balancing primarily for web
    and ftp servers though other services are supported.
    
  • No added dependencies
  • No removed dependencies
pirut-1.2.10-1.el5 - pirut-1.3.28-13.el5
  • Group: Applications/System
  • Summary: Package Installation, Removal and Update Tools
  • Description:
    pirut (pronounced "pirate") provides a set of graphical tools for managing
    software.
    
  • No added dependencies
  • No removed dependencies
pkgconfig-0.21-1.fc6 - pkgconfig-0.21-2.el5
  • Group: Development/Tools
  • Summary: A tool for determining compilation options.
  • Description:
    The pkgconfig tool determines compilation options. For each required
    library, it reads the configuration file and outputs the necessary
    compiler and linker flags.
    
  • No added dependencies
  • No removed dependencies
pm-utils-0.99.3-6.el5.17 - pm-utils-0.99.3-6.el5.19
  • Group: System Environment/Base
  • Summary: Power management utilities and scripts for Fedora Core
  • Description:
    The pm-utils package contains utilities and scripts for Fedora Core
    useful for power management.
    
  • No added dependencies
  • No removed dependencies
policycoreutils-1.33.12-12.el5 - policycoreutils-1.33.12-14.el5
  • Group: System Environment/Base
  • Summary: SELinux policy core utilities.
  • Description:
    Security-enhanced Linux is a feature of the Linux® kernel and a number
    of utilities with enhanced security functionality designed to add
    mandatory access controls to Linux. The Security-enhanced Linux
    kernel contains new architectural components originally developed to
    improve the security of the Flask operating system. These
    architectural components provide general support for the enforcement
    of many kinds of mandatory access control policies, including those
    based on the concepts of Type Enforcement®, Role-based Access
    Control, and Multi-level Security.
    
    policycoreutils contains the policy core utilities that are required
    for basic operation of a SELinux system. These utilities include
    load_policy to load policies, setfiles to label filesystems, newrole
    to switch roles, and run_init to run /etc/init.d scripts in the proper
    context.
    
  • No added dependencies
  • No removed dependencies
poppler-0.5.4-4.1.el5 - poppler-0.5.4-4.4.el5_1
  • Group: Development/Libraries
  • Summary: PDF rendering library
  • Description:
    Poppler, a PDF rendering library, it's a fork of the xpdf PDF
    viewer developed by Derek Noonburg of Glyph and Cog, LLC.
    
  • No added dependencies
  • No removed dependencies
postgresql-8.1.9-1.el5 - postgresql-8.1.11-1.el5_1.1
  • Group: Applications/Databases
  • Summary: PostgreSQL client programs and libraries.
  • Description:
    PostgreSQL is an advanced Object-Relational database management system
    (DBMS) that supports almost all SQL constructs (including
    transactions, subselects and user-defined types and functions). The
    postgresql package includes the client programs and libraries that
    you'll need to access a PostgreSQL DBMS server. These PostgreSQL
    client programs are programs that directly manipulate the internal
    structure of PostgreSQL databases on a PostgreSQL server. These client
    programs can be located on the same machine with the PostgreSQL
    server, or may be on a remote machine which accesses a PostgreSQL
    server over a network connection. This package contains the docs
    in HTML for the whole package, as well as command-line utilities for
    managing PostgreSQL databases on a PostgreSQL server.
    
    If you want to manipulate a PostgreSQL database on a remote PostgreSQL
    server, you need this package. You also need to install this package
    if you're installing the postgresql-server package.
    
  • No added dependencies
  • No removed dependencies
ppc64-utils-0.11-2 - ppc64-utils-0.11-9.el5
  • Group: System Environment/Base
  • Summary: Linux/PPC64 specific utilities
  • Description:
    A collection of utilities for Linux on PPC64 platforms.
    
  • Added Dependencies:
    • db4-devel
    • librtas-devel >= 1.3.3
    • libstdc++-devel
    • libtool
    • sg3_utils-devel
    • zlib-devel
  • Removed Dependencies:
    • librtas-devel
procps-3.2.7-8.1.el5 - procps-3.2.7-9.el5
  • Group: Applications/System
  • Summary: System and process monitoring utilities.
  • Description:
    The procps package contains a set of system utilities that provide
    system information. Procps includes ps, free, skill, pkill, pgrep,
    snice, tload, top, uptime, vmstat, w, watch and pdwx. The ps command
    displays a snapshot of running processes. The top command provides
    a repetitive update of the statuses of running processes. The free
    command displays the amounts of free and used memory on your
    system. The skill command sends a terminate command (or another
    specified signal) to a specified set of processes. The snice
    command is used to change the scheduling priority of specified
    processes. The tload command prints a graph of the current system
    load average to a specified tty. The uptime command displays the
    current time, how long the system has been running, how many users
    are logged on, and system load averages for the past one, five,
    and fifteen minutes. The w command displays a list of the users
    who are currently logged on and what they are running. The watch
    program watches a running program. The vmstat command displays
    virtual memory statistics about processes, memory, paging, block
    I/O, traps, and CPU activity. The pwdx command reports the current
    working directory of a process or processes.
    
  • No added dependencies
  • No removed dependencies
psmisc-22.2-5 - psmisc-22.2-6
  • Group: Applications/System
  • Summary: Utilities for managing processes on your system.
  • Description:
    The psmisc package contains utilities for managing processes on your
    system: pstree, killall and fuser. The pstree command displays a tree
    structure of all of the running processes on your system. The killall
    command sends a specified signal (SIGTERM if nothing is specified) to
    processes identified by name. The fuser command identifies the PIDs
    of processes that are using specified files or filesystems.
    
  • No added dependencies
  • No removed dependencies
pygtk2-2.10.1-8.el5 - pygtk2-2.10.1-12.el5
  • Group: Development/Languages
  • Summary: Python bindings for the GTK+ widget set.
  • Description:
    PyGTK is an extension module for python that gives you access to the GTK+
    widget set. Just about anything you can write in C with GTK+ you can write
    in python with PyGTK (within reason), but with all the benefits of python.
    
  • No added dependencies
  • No removed dependencies
pykickstart-0.43-1.el5 - pykickstart-0.43.1-1.el5
  • Group: System Environment/Libraries
  • Summary: A python library for manipulating kickstart files
  • Description:
    The pykickstart package is a python library for manipulating kickstart
    files.
    
  • No added dependencies
  • No removed dependencies
python-2.4.3-19.el5 - python-2.4.3-21.el5
  • Group: Development/Languages
  • Summary: An interpreted, interactive, object-oriented programming language.
  • Description:
    Python is an interpreted, interactive, object-oriented programming
    language often compared to Tcl, Perl, Scheme or Java. Python includes
    modules, classes, exceptions, very high level dynamic data types and
    dynamic typing. Python supports interfaces to many system calls and
    libraries, as well as to various windowing systems (X11, Motif, Tk,
    Mac and MFC).
    
    Programmers can write new built-in modules for Python in C or C++.
    Python can be used as an extension language for applications that need
    a programmable interface. This package contains most of the standard
    Python modules, as well as modules for interfacing to the Tix widget
    set for Tk and RPM.
    
    Note that documentation for Python is provided in the python-docs
    package.
    
  • No added dependencies
  • No removed dependencies
python-virtinst-0.103.0-3.el5 - python-virtinst-0.300.2-8.el5
  • Group: Development/Libraries
  • Summary: Python modules for starting Xen guest installations
  • Description:
    virtinst is a module to help in starting installations of Fedora/Red
    Hat Enterprise Linux related distributions inside of virtual machines. It
    supports both paravirt guests (for which only FC and RHEL guests are
    currently supported) as well as fully virtualized guests. It uses
    libvirt (http://www.libvirt.org) for starting things.
    
    Also contained is a simple script virt-install which uses
    virtinst in a command line mode.
    
  • Added Dependencies:
    • gettext
    • libvirt-python
    • libxml2-python
    • python-urlgrabber
  • No removed dependencies
redhat-release-5Server-5.1.0.2 - redhat-release-5Server-5.2.0.4
  • Group: System Environment/Base
  • Summary: Red Hat Enterprise Linux release file
  • Description:
    Red Hat Enterprise Linux release files
    
  • No added dependencies
  • No removed dependencies
redhat-release-notes-5Server-9 - redhat-release-notes-5Server-12
  • Group: System Environment/Base
  • Summary: Red Hat Enterprise Linux release notes files
  • Description:
    Red Hat Enterprise Linux release notes files.
    
  • No added dependencies
  • No removed dependencies
redhat-rpm-config-8.0.45-22.el5 - redhat-rpm-config-8.0.45-24.el5
  • Group: Development/System
  • Summary: Red Hat specific rpm configuration files.
  • Description:
    Red Hat specific rpm configuration files.
    
  • No added dependencies
  • No removed dependencies
rgmanager-2.0.31-1.el5 - rgmanager-2.0.38-2.el5
  • Group: System Environment/Base
  • Summary: Open Source HA Resource Group Failover for Red Hat Enterprise Linux
  • Description:
    Red Hat Resource Group Manager provides high availability of critical server
    applications in the event of planned or unplanned system downtime.
    
  • Added Dependencies:
    • slang-devel
  • No removed dependencies
rhel-instnum-1.0.7-1.el5 - rhel-instnum-1.0.8-1.el5
  • Group: System Environment/Base
  • Summary: A library for decoding RHEL installation numbers
  • Description:
    rhel-instnum provides methods for decoding RHEL installation numbers
    
  • No added dependencies
  • Removed Dependencies:
    • python
rhn-client-tools-0.4.16-1.el5 - rhn-client-tools-0.4.17-8.el5
  • Group: System Environment/Base
  • Summary: Support programs and libraries for Red Hat Network
  • Description:
    Red Hat Network Client Tools provides programs and libraries to allow your
    system to receive software updates from Red Hat Network.
    
  • No added dependencies
  • No removed dependencies
rhpxl-0.41.1-1.el5 - rhpxl-0.41.1-6.el5
  • Group: System Environment/Libraries
  • Summary: Python library for configuring and running X.
  • Description:
    The rhpxl (pronounced 'rapunzel') package contains a Python library for
    configuring and running X.
    
  • No added dependencies
  • No removed dependencies
rpm-4.4.2-47.el5 - rpm-4.4.2-48.el5
  • Group: System Environment/Base
  • Summary: The RPM package management system.
  • Description:
    The RPM Package Manager (RPM) is a powerful command line driven
    package management system capable of installing, uninstalling,
    verifying, querying, and updating software packages. Each software
    package consists of an archive of files along with information about
    the package like its version, a description, etc.
    
  • No added dependencies
  • No removed dependencies
rsh-0.17-37.el5 - rsh-0.17-38.el5
  • Group: Applications/Internet
  • Summary: Clients for remote access commands (rsh, rlogin, rcp).
  • Description:
    The rsh package contains a set of programs which allow users to run
    commands on remote machines, login to other machines and copy files
    between machines (rsh, rlogin and rcp). All three of these commands
    use rhosts style authentication. This package contains the clients
    needed for all of these services.
    The rsh package should be installed to enable remote access to other
    machines.
    
  • No added dependencies
  • No removed dependencies
ruby-1.8.5-5.el5 - ruby-1.8.5-5.el5_1.1
  • Group: Development/Languages
  • Summary: An interpreter of object-oriented scripting language
  • Description:
    Ruby is the interpreted scripting language for quick and easy
    object-oriented programming. It has many features to process text
    files and to do system management tasks (as in Perl). It is simple,
    straight-forward, and extensible.
    
  • No added dependencies
  • No removed dependencies
s390utils-1.5.3-10.el5.14 - s390utils-1.5.3-17.el5
  • Group: System Environment/Base
  • Summary: Linux/390 specific utilities.
  • Description:
    This package contains utilities related to Linux for S/390.
    The most important programs contained in this package are:
    
    - The cmstools suite to list, check, copy and cat files from a CMS volume.
    - chccwdev, a script to generically change attributes of a ccw device.
    - dasdfmt, which is used to low-level format eckd-dasds with
    either the classic linux disk layout or the new z/OS
    compatible disk layout.
    - dasdview, which displays DASD and VTOC information and dumps the content
    of a DASD to the console.
    - fdasd, which is used to create or modify partitions on
    eckd-dasds formatted with the z/OS compatible disk layout.
    - osasnmpd, a subagent for net-snmp to access the OSA hardware.
    - qetharp to query and purge address data in the OSA and HiperSockets hardware
    - qethconf to configure IBM QETH function IPA, VIPA and Proxy ARP.
    - src_vipa.sh to start applications using VIPA capabilities
    - tunedasd, a tool to adjust tunable parameters on DASD devices
    - vmconvert, a tool to convert vm dumps to lkcd compatible dumps.
    - vmcp, a tool to send CP commands from a Linux guest to the VM.
    - zipl, which is used to make either dasds or tapes bootable
    for system IPL or system dump.
    - zdump, which is used to retrieve system dumps from either
    tapes or dasds.
    
  • No added dependencies
  • No removed dependencies
salinfo-1.1-3.el5 - salinfo-1.1-4.el5
  • Group: Utilities/System
  • Summary: Sal info tool.
  • Description:
    The IA64 Linux kernel has a Software Abstraction Layer (SAL). One of
    SAL's tasks is to record machine problems such as CMC (correctable
    machine checks), CPE (correctable platform errors), MCA (machine check
    architecture) and INIT (cpu initialized after boot). These records are
    provided by SAL to user space. salinfo saves and decodes CMC/CPE/MCA
    and INIT records.
    
  • No added dependencies
  • No removed dependencies
samba-3.0.25b-0.el5.4 - samba-3.0.28-0.el5.8
  • Group: System Environment/Daemons
  • Summary: The Samba SMB server.
  • Description:
    
    Samba is the suite of programs by which a lot of PC-related machines
    share files, printers, and other information (such as lists of
    available files and printers). The Windows NT, OS/2, and Linux
    operating systems support this natively, and add-on packages can
    enable the same thing for DOS, Windows, VMS, UNIX of all kinds, MVS,
    and more. This package provides an SMB server that can be used to
    provide network services to SMB (sometimes called "Lan Manager")
    clients. Samba uses NetBIOS over TCP/IP (NetBT) protocols and does NOT
    need the NetBEUI (Microsoft Raw NetBIOS frame) protocol.
    
  • No added dependencies
  • No removed dependencies
sblim-1-29.EL5 - sblim-1-31.el5
  • Group: Applications/System
  • Summary: Standards Based Linux Instrumentation for Manageability
  • Description:
    SBLIM stands for Standards Based Linux Instrumentation for Manageability,
    and consists of a set of standards based Web Based Enterprise Management
    (WBEM) modules that use the Common Information Model (CIM) standard to
    gather and provide systems management information, events, and methods
    to local or networked consumers via an CIM object services broker using
    the CMPI (Common Manageability Programming Interface) standard.
    This package provides a set of core providers and development tools
    for systems management applications.
    
  • No added dependencies
  • No removed dependencies
scim-anthy-1.2.0-5.el5 - scim-anthy-1.2.0-6.el5
  • Group: System Environment/Libraries
  • Summary: SCIM IMEngine for anthy for Japanese input
  • Description:
    Scim-anthy is a SCIM IMEngine module for anthy to support Japanese input.
    
  • No added dependencies
  • No removed dependencies
scim-chewing-0.3.1-10.el5 - scim-chewing-0.3.1-11.el5
  • Group: System Environment/Libraries
  • Summary: Chewing Chinese input method for SCIM
  • Description:
    This package provides Chewing Chinese input method for SCIM.
    
  • No added dependencies
  • No removed dependencies
scim-pinyin-0.5.91-15.el5 - scim-pinyin-0.5.91-16.el5
  • Group: System Environment/Libraries
  • Summary: Smart Pinyin IMEngine for Smart Common Input Method platform
  • Description:
    Simplified Chinese Smart Pinyin IMEngine for SCIM.
    
  • No added dependencies
  • No removed dependencies
selinux-policy-2.4.6-104.el5 - selinux-policy-2.4.6-137.el5
  • Group: System Environment/Base
  • Summary: SELinux policy configuration
  • Description:
    SELinux Reference Policy - modular.
    
  • No added dependencies
  • No removed dependencies
setroubleshoot-1.8.11-4.el5 - setroubleshoot-2.0.5-3.el5
  • Group: Applications/System
  • Summary: Helps troubleshoot SELinux problems
  • Description:
    setroubleshoot gui. Application that allows you to view setroubleshoot-server
    messages.
    Provides tools to help diagnose SELinux problems. When AVC messages
    are generated an alert can be generated that will give information
    about the problem and help track its resolution. Alerts can be configured
    to user preference. The same tools can be run on existing log files.
    
  • Added Dependencies:
    • desktop-file-utils
    • htmlview
  • No removed dependencies
sg3_utils-1.20-2.1 - sg3_utils-1.25-1.el5
  • Group: Utilities/System
  • Summary: Utils for Linux's SCSI generic driver devices + raw devices
  • Description:
    Collection of Linux utilities for devices that use the SCSI command set.
    Includes utilities to copy data based on "dd" syntax and semantics (called
    sg_dd, sgp_dd and sgm_dd); check INQUIRY data and VPD pages (sg_inq); check
    mode and log pages (sginfo, sg_modes and sg_logs); spin up and down
    disks (sg_start); do self tests (sg_senddiag); and various other functions.
    See the README, CHANGELOG and COVERAGE files. Requires the linux kernel 2.4
    series or later. In the 2.4 series SCSI generic device names (e.g. /dev/sg0)
    must be used. In the 2.6 series other device names may be used as
    well (e.g. /dev/sda).
    
    Warning: Some of these tools access the internals of your system
    and the incorrect usage of them may render your system inoperable.
    
  • No added dependencies
  • No removed dependencies
shadow-utils-4.0.17-12.el5 - shadow-utils-4.0.17-13.el5
  • Group: System Environment/Base
  • Summary: Utilities for managing accounts and shadow password files.
  • Description:
    The shadow-utils package includes the necessary programs for
    converting UNIX password files to the shadow password format, plus
    programs for managing user and group accounts. The pwconv command
    converts passwords to the shadow password format. The pwunconv command
    unconverts shadow passwords and generates an npasswd file (a standard
    UNIX password file). The pwck command checks the integrity of password
    and shadow files. The lastlog command prints out the last login times
    for all users. The useradd, userdel, and usermod commands are used for
    managing user accounts. The groupadd, groupdel, and groupmod commands
    are used for managing group accounts.
    
  • No added dependencies
  • No removed dependencies
shared-mime-info-0.19-3.el5 - shared-mime-info-0.19-5.el5
  • Group: System Environment/Libraries
  • Summary: Shared MIME information database
  • Description:
    This is the freedesktop.org shared MIME info database.
    
    Many programs and desktops use the MIME system to represent the types of
    files. Frequently, it is necessary to work out the correct MIME type for
    a file. This is generally done by examining the file's name or contents,
    and looking up the correct MIME type in a database.
    
  • No added dependencies
  • No removed dependencies
smartmontools-5.36-3.1.el5 - smartmontools-5.36-4.el5
  • Group: System Environment/Base
  • Summary: Tools for monitoring SMART capable hard disks
  • Description:
    The smartmontools package contains two utility programs (smartctl
    and smartd) to control and monitor storage systems using the Self-
    Monitoring, Analysis and Reporting Technology System (SMART) built
    into most modern ATA and SCSI hard disks. In many cases, these
    utilities will provide advanced warning of disk degradation and
    failure.
    
  • No added dependencies
  • No removed dependencies
sos-1.7-9.1.el5 - sos-1.7-9.2.el5
  • Group: Development/Libraries
  • Summary: A set of tools to gather troubleshooting information from a system
  • Description:
    Sos is a set of tools that gathers information about system
    hardware and configuration. The information can then be used for
    diagnostic purposes and debugging. Sos is commonly used to help
    support technicians and developers.
    
  • No added dependencies
  • No removed dependencies
spamassassin-3.1.9-1.el5 - spamassassin-3.2.4-1.el5
  • Group: Applications/Internet
  • Summary: Spam filter for email which can be invoked from mail delivery agents.
  • Description:
    SpamAssassin provides you with a way to reduce if not completely eliminate
    Unsolicited Commercial Email (SPAM) from your incoming email. It can
    be invoked by a MDA such as sendmail or postfix, or can be called from
    a procmail script, .forward file, etc. It uses a genetic-algorithm
    evolved scoring system to identify messages which look spammy, then
    adds headers to the message so they can be filtered by the user's mail
    reading software. This distribution includes the spamd/spamc components
    which create a server that considerably speeds processing of mail.
    
    To enable spamassassin, if you are receiving mail locally, simply add
    this line to your ~/.procmailrc:
    INCLUDERC=/etc/mail/spamassassin/spamassassin-default.rc
    
    To filter spam for all users, add that line to /etc/procmailrc
    (creating if necessary).
    
  • Added Dependencies:
    • perl-HTML-Parser >= 3.43
  • No removed dependencies
speex-1.0.5-4 - speex-1.0.5-4.el5_1.1
  • Group: System Environment/Libraries
  • Summary: A voice compression format (codec)
  • Description:
    Speex is a patent-free compression format designed especially for
    speech. It is specialized for voice communications at low bit-rates in
    the 2-45 kbps range. Possible applications include Voice over IP
    (VoIP), Internet audio streaming, audio books, and archiving of speech
    data (e.g. voice mail).
    
  • No added dependencies
  • No removed dependencies
squid-2.6.STABLE6-4.el5 - squid-2.6.STABLE6-5.el5_1.3
  • Group: System Environment/Daemons
  • Summary: The Squid proxy caching server.
  • Description:
    Squid is a high-performance proxy caching server for Web clients,
    supporting FTP, gopher, and HTTP data objects. Unlike traditional
    caching software, Squid handles all requests in a single,
    non-blocking, I/O-driven process. Squid keeps meta data and especially
    hot objects cached in RAM, caches DNS lookups, supports non-blocking
    DNS lookups, and implements negative caching of failed requests.
    
    Squid consists of a main server program squid, a Domain Name System
    lookup program (dnsserver), a program for retrieving FTP data
    (ftpget), and some management and client tools.
    
  • No added dependencies
  • No removed dependencies
sudo-1.6.8p12-10 - sudo-1.6.8p12-12.el5
  • Group: Applications/System
  • Summary: Allows restricted root access for specified users.
  • Description:
    Sudo (superuser do) allows a system administrator to give certain
    users (or groups of users) the ability to run some (or all) commands
    as root while logging all commands and arguments. Sudo operates on a
    per-command basis. It is not a replacement for the shell. Features
    include: the ability to restrict what commands a user may run on a
    per-host basis, copious logging of each command (providing a clear
    audit trail of who did what), a configurable timeout of the sudo
    command, and the ability to use the same configuration file (sudoers)
    on many different machines.
    
  • Added Dependencies:
    • audit-libs-devel
    • libcap-devel
  • No removed dependencies
sysklogd-1.4.1-40.el5 - sysklogd-1.4.1-44.el5
  • Group: System Environment/Daemons
  • Summary: System logging and kernel message trapping daemons.
  • Description:
    The sysklogd package contains two system utilities (syslogd and klogd)
    which provide support for system logging. Syslogd and klogd run as
    daemons (background processes) and log system messages to different
    places, like sendmail logs, security logs, error logs, etc.
    
  • No added dependencies
  • No removed dependencies
sysstat-7.0.0-3.el5 - sysstat-7.0.2-1.el5
  • Group: Applications/System
  • Summary: The sar and iostat system monitoring commands.
  • Description:
    This package provides the sar and iostat commands for Linux. Sar and
    iostat enable system monitoring of disk, network, and other IO
    activity.
    
  • No added dependencies
  • No removed dependencies
system-config-cluster-1.0.50-1.3 - system-config-cluster-1.0.52-1.1
  • Group: Applications/System
  • Summary: system-config-cluster is a utility which allows you to manage cluster configuration in a graphical setting.
  • Description:
    system-config-cluster is a utility which allows you to manage cluster configuuration in a graphical setting.
    
  • No added dependencies
  • No removed dependencies
system-config-date-1.8.12-1.el5 - system-config-date-1.8.12-3.el5
  • Group: System Environment/Base
  • Summary: A graphical interface for modifying system date and time
  • Description:
    system-config-date is a graphical interface for changing the system date and
    time, configuring the system time zone, and setting up the NTP daemon to
    synchronize the time of the system with an NTP time server.
    
  • No added dependencies
  • No removed dependencies
system-config-httpd-1.3.3.1-1.el5 - system-config-httpd-1.3.3.3-1.el5
  • Group: Applications/System
  • Summary: Apache configuration tool
  • Description:
    A RHN configuration tool for apache.
    
  • Added Dependencies:
    • gettext
  • No removed dependencies
system-config-kdump-1.0.12-1.el5 - system-config-kdump-1.0.14-1.el5
  • Group: System Environment/Base
  • Summary: A graphical interface for configuring kernel crash dumping
  • Description:
    system-config-kdump is a graphical tool for configuring kernel crash
    dumping via kdump and kexec.
    
  • No added dependencies
  • No removed dependencies
system-config-kickstart-2.6.19.1-1.el5 - system-config-kickstart-2.6.19.6-1.el5
  • Group: System Environment/Base
  • Summary: A graphical interface for making kickstart files.
  • Description:
    Kickstart Configurator is a graphical tool for creating kickstart files.
    
  • No added dependencies
  • No removed dependencies
system-config-language-1.1.18-1.el5 - system-config-language-1.1.18-2.el5
  • Group: System Environment/Base
  • Summary: A graphical interface for modifying the system language
  • Description:
    system-config-language is a graphical user interface that
    allows the user to change the default language of the system.
    
  • No added dependencies
  • No removed dependencies
system-config-lvm-1.0.22-1.0.el5 - system-config-lvm-1.1.3-2.0.el5
  • Group: Applications/System
  • Summary: A utility for graphically configuring Logical Volumes
  • Description:
    system-config-lvm is a utility for graphically configuring Logical Volumes
    
  • Added Dependencies:
    • intltool
  • No removed dependencies
system-config-network-1.3.99-2.el5 - system-config-network-1.3.99.10-2.el5
  • Group: Applications/System
  • Summary: The GUI of the NEtwork Adminstration Tool
  • Description:
    This is the GUI of the network configuration tool,
    supporting Ethernet, Wireless, TokenRing, ADSL, ISDN and PPP.
    
  • No added dependencies
  • No removed dependencies
system-config-printer-0.7.32.5-1.el5 - system-config-printer-0.7.32.8-1.el5
  • Group: System Environment/Base
  • Summary: A printer administration tool
  • Description:
    system-config-printer is a graphical user interface that allows
    the user to configure a CUPS print server.
    
  • No added dependencies
  • No removed dependencies
system-config-securitylevel-1.6.29.1-1.el5 - system-config-securitylevel-1.6.29.1-2.1.el5
  • Group: System Environment/Base
  • Summary: A graphical interface for modifying the system security level
  • Description:
    system-config-securitylevel is a graphical user interface for
    setting basic firewall rules.
    
  • No added dependencies
  • No removed dependencies
system-config-users-1.2.51-1.el5 - system-config-users-1.2.51-4.el5
  • Group: Applications/System
  • Summary: A graphical interface for administering users and groups
  • Description:
    system-config-users is a graphical utility for administrating
    users and groups. It depends on the libuser library.
    
  • No added dependencies
  • No removed dependencies
systemtap-0.5.14-1.el5 - systemtap-0.6.2-1.el5
  • Group: Development/System
  • Summary: Instrumentation System
  • Description:
    SystemTap is an instrumentation system for systems running Linux 2.6.
    Developers can write instrumentation to collect data on the operation
    of the system.
    
  • Added Dependencies:
    • /usr/bin/dvips
    • /usr/bin/latex
    • /usr/bin/ps2pdf
    • crash-devel
    • latex2html
    • libcap-devel
    • zlib-devel
  • Removed Dependencies:
    • dejagnu
    • glib2-devel >= 2.0.0
tcpdump-3.9.4-11.el5 - tcpdump-3.9.4-12.el5
  • Group: Applications/Internet
  • Summary: A network traffic monitoring tool.
  • Description:
    Tcpdump is a command-line tool for monitoring network traffic.
    Tcpdump can capture and display the packet headers on a particular
    network interface or on all interfaces. Tcpdump can display all of
    the packet headers, or just the ones that match particular criteria.
    
    Install tcpdump if you need a program to monitor network traffic.
    
  • Added Dependencies:
    • /usr/sbin/sendmail
  • No removed dependencies
telnet-0.17-38.el5 - telnet-0.17-39.el5
  • Group: Applications/Internet
  • Summary: The client program for the telnet remote login protocol.
  • Description:
    Telnet is a popular protocol for logging into remote systems over the
    Internet. The telnet package provides a command line telnet client.
    
  • No added dependencies
  • No removed dependencies
tetex-3.0-33.1.el5 - tetex-3.0-33.2.el5_1.2
  • Group: Applications/Publishing
  • Summary: The TeX text formatting system.
  • Description:
    TeTeX is an implementation of TeX for Linux or UNIX systems. TeX takes
    a text file and a set of formatting commands as input and creates a
    typesetter-independent .dvi (DeVice Independent) file as output.
    Usually, TeX is used in conjunction with a higher level formatting
    package like LaTeX or PlainTeX, since TeX by itself is not very
    user-friendly. The output format needn't to be DVI, but also PDF,
    when using pdflatex or similar tools.
    
    Install tetex if you want to use the TeX text formatting system. Consider
    to install tetex-latex (a higher level formatting package which provides
    an easier-to-use interface for TeX). Unless you are an expert at using TeX,
    you should also install the tetex-doc package, which includes the
    documentation for TeX.
    
  • No added dependencies
  • No removed dependencies
tk-8.4.13-3.fc6 - tk-8.4.13-5.el5_1.1
  • Group: Development/Languages
  • Summary: Tk graphical toolkit for the Tcl scripting language
  • Description:
    When paired with the Tcl scripting language, Tk provides a fast and powerful
    way to create cross-platform GUI applications.
    
  • No added dependencies
  • No removed dependencies
tog-pegasus-2.6.1-2.el5 - tog-pegasus-2.7.0-2.el5
  • Group: Systems Management/Base
  • Summary: OpenPegasus WBEM Services for Linux
  • Description:
    OpenPegasus WBEM Services for Linux enables management solutions that deliver
    increased control of enterprise resources. WBEM is a platform and resource
    independent DMTF standard that defines a common information model and
    communication protocol for monitoring and controlling resources from diverse
    sources.
    
  • Added Dependencies:
    • net-snmp-devel
  • No removed dependencies
tomcat5-5.5.23-0jpp.3.0.2.el5 - tomcat5-5.5.23-0jpp.7.el5
  • Group: Networking/Daemons
  • Summary: Apache Servlet/JSP Engine, RI for Servlet 2.4/JSP 2.0 API
  • Description:
    Tomcat is the servlet container that is used in the official Reference
    Implementation for the Java Servlet and JavaServer Pages technologies.
    The Java Servlet and JavaServer Pages specifications are developed by
    Sun under the Java Community Process.
    
    Tomcat is developed in an open and participatory environment and
    released under the Apache Software License. Tomcat is intended to be
    a collaboration of the best-of-breed developers from around the world.
    We invite you to participate in this open development project. To
    learn more about getting involved, click here.
    
  • No added dependencies
  • No removed dependencies
totem-2.16.7-1.el5 - totem-2.16.7-4.el5
  • Group: Applications/Multimedia
  • Summary: Movie player for GNOME 2
  • Description:
    Totem is simple movie player for the Gnome desktop. It features a
    simple playlist, a full-screen mode, seek and volume controls, as well as
    a pretty complete keyboard navigation.
    
  • Added Dependencies:
    • gecko-devel-unstable >= 1.9
  • Removed Dependencies:
    • firefox-devel
traceroute-2.0.1-2.el5 - traceroute-2.0.1-3.el5
  • Group: Applications/Internet
  • Summary: Traces the route taken by packets over an IPv4/IPv6 network
  • Description:
    The traceroute utility displays the route used by IP packets on their
    way to a specified network (or Internet) host. Traceroute displays
    the IP number and host name (if possible) of the machines along the
    route taken by the packets. Traceroute is used as a network debugging
    tool. If you're having network connectivity problems, traceroute will
    show you where the trouble is coming from along the route.
    
    Install traceroute if you need a tool for diagnosing network connectivity
    problems.
    
  • No added dependencies
  • No removed dependencies
tzdata-2007d-1.el5 - tzdata-2007k-2.el5
  • Group: System Environment/Base
  • Summary: Timezone data
  • Description:
    This package contains data files with rules for various timezones around
    the world.
    
  • No added dependencies
  • No removed dependencies
udev-095-14.9.el5 - udev-095-14.16.el5
  • Group: System Environment/Base
  • Summary: A userspace implementation of devfs
  • Description:
    The udev package contains an implementation of devfs in
    userspace using sysfs and netlink.
    
  • No added dependencies
  • No removed dependencies
usermode-1.88-3.el5 - usermode-1.88-3.el5.1
  • Group: Applications/System
  • Summary: Tools for certain user account management tasks.
  • Description:
    The usermode package contains the userhelper program, which can be
    used to allow configured programs to be run with superuser privileges
    by ordinary users.
    
  • No added dependencies
  • No removed dependencies
util-linux-2.13-0.45.el5 - util-linux-2.13-0.47.el5
  • Group: System Environment/Base
  • Summary: A collection of basic system utilities.
  • Description:
    The util-linux package contains a large variety of low-level system
    utilities that are necessary for a Linux system to function. Among
    others, Util-linux contains the fdisk configuration tool and the login
    program.
    
  • No added dependencies
  • No removed dependencies
virt-manager-0.4.0-3.el5 - virt-manager-0.5.3-8.el5
  • Group: Applications/Emulators
  • Summary: Virtual Machine Manager
  • Description:
    Virtual Machine Manager provides a graphical tool for administering
    virtual machines such as Xen. It uses libvirt as the backend management
    API.
    
  • No added dependencies
  • No removed dependencies
vsftpd-2.0.5-10.el5 - vsftpd-2.0.5-12.el5
  • Group: System Environment/Daemons
  • Summary: vsftpd - Very Secure Ftp Daemon
  • Description:
    vsftpd is a Very Secure FTP daemon. It was written completely from
    scratch.
    
  • No added dependencies
  • No removed dependencies
wireshark-0.99.6-1.el5 - wireshark-0.99.7-1.el5
  • Group: Applications/Internet
  • Summary: Network traffic analyzer
  • Description:
    Wireshark is a network traffic analyzer for Unix-ish operating systems.
    
    This package lays base for libpcap, a packet capture and filtering
    library, contains command-line utilities, contains plugins and
    documentation for wireshark. A graphical user interface is packaged
    separately to GTK+ package.
    
  • Added Dependencies:
    • libsmi-devel
  • Removed Dependencies:
    • net-snmp-devel >= 5.3
    • net-snmp-utils >= 5.3
wpa_supplicant-0.4.8-10.1.fc6 - wpa_supplicant-0.4.8-10.2.el5
  • Group: System Environment/Base
  • Summary: WPA/WPA2/IEEE 802.1X Supplicant
  • Description:
    wpa_supplicant is a WPA Supplicant for Linux, BSD and Windows with support
    for WPA and WPA2 (IEEE 802.11i / RSN). Supplicant is the IEEE 802.1X/WPA
    component that is used in the client stations. It implements key negotiation
    with a WPA Authenticator and it controls the roaming and IEEE 802.11
    authentication/association of the wlan driver.
    
  • No added dependencies
  • No removed dependencies
x3270-3.3.4p7-3.el5.1 - x3270-3.3.4p7-3.el5.4
  • Group: Applications/Internet
  • Summary: An X Window System based IBM 3278/3279 terminal emulator
  • Description:
    The x3270 package contains files needed for emulating the IBM 3278/3279
    terminals, commonly used with mainframe applications.
    
    You will also need to install a frontend for x3270. Available frontends
    are x3270-x11 (for the X Window System) and x3270-text (for text mode).
    
  • Added Dependencies:
    • /usr/bin/makeconv
    • libicu-devel
  • No removed dependencies
xen-3.0.3-41.el5 - xen-3.0.3-64.el5
  • Group: Development/Libraries
  • Summary: Xen is a virtual machine monitor
  • Description:
    This package contains the Xen tools and management daemons needed
    to run virtual machines on x86, x86_64, and ia64 systems.
    Information on how to use Xen can be found at the Xen project pages.
    
    The Xen system also requires the Xen hypervisor and domain-0
    kernel, which can be found in the kernel-xen* package.
    
    Virtualization can be used to run multiple operating systems on one
    physical system, for purposes of hardware consolidation, hardware
    abstraction, or to test untrusted applications in a sandboxed
    environment.
    
  • No added dependencies
  • No removed dependencies
xorg-x11-drv-ati-6.6.3-3.2.el5 - xorg-x11-drv-ati-6.6.3-3.13.el5
  • Group: User Interface/X Hardware Support
  • Summary: Xorg X11 ati video driver
  • Description:
    X.Org X11 ati video driver.
    
  • Added Dependencies:
    • autoconf
    • automake
    • libtool
    • xorg-x11-server-randr-source >= 1.1.1-48.39.el5
  • No removed dependencies
xorg-x11-drv-i810-1.6.5-9.6.el5 - xorg-x11-drv-i810-1.6.5-9.13.el5
  • Group: User Interface/X Hardware Support
  • Summary: Xorg X11 i810 video driver(s)
  • Description:
    X.Org X11 i810 video driver.
    
  • Added Dependencies:
    • xorg-x11-server-randr-source >= 1.1.1-48.39.el5
  • No removed dependencies
xorg-x11-drv-keyboard-1.1.0-2.1 - xorg-x11-drv-keyboard-1.1.0-3
  • Group: User Interface/X Hardware Support
  • Summary: Xorg X11 keyboard input driver
  • Description:
    X.Org X11 keyboard input driver.
    
  • No added dependencies
  • No removed dependencies
xorg-x11-drv-mga-1.4.2-6.el5 - xorg-x11-drv-mga-1.4.2-7.el5
  • Group: User Interface/X Hardware Support
  • Summary: Xorg X11 mga video driver
  • Description:
    X.Org X11 mga video driver.
    
  • No added dependencies
  • No removed dependencies
xorg-x11-drv-nv-2.1.2-1.el5 - xorg-x11-drv-nv-2.1.6-6.el5
  • Group: User Interface/X Hardware Support
  • Summary: Xorg X11 nv video driver
  • Description:
    X.Org X11 nv video driver.
    
  • Added Dependencies:
    • xorg-x11-server-randr-source
  • No removed dependencies
xorg-x11-drv-sis-0.9.1-7 - xorg-x11-drv-sis-0.9.1-7.1.el5
  • Group: User Interface/X Hardware Support
  • Summary: Xorg X11 sis video driver
  • Description:
    X.Org X11 sis video driver.
    
  • No added dependencies
  • No removed dependencies
xorg-x11-server-1.1.1-48.26.el5 - xorg-x11-server-1.1.1-48.41.el5
  • Group: User Interface/X
  • Summary: X.Org X11 X server
  • Description:
    X.Org X11 X server
    
  • No added dependencies
  • No removed dependencies
xorg-x11-xinit-1.0.2-13.el5 - xorg-x11-xinit-1.0.2-15.el5
  • Group: User Interface/X
  • Summary: X.Org X11 X Window System xinit startup scripts
  • Description:
    X.Org X11 X Window System xinit startup scripts
    
  • No added dependencies
  • No removed dependencies
xsane-0.991-4.el5 - xsane-0.991-5.el5
  • Group: Applications/Multimedia
  • Summary: An X Window System front-end for the SANE scanner interface.
  • Description:
    XSane is an X based interface for the SANE (Scanner Access Now Easy)
    library, which provides access to scanners, digital cameras, and other
    capture devices. XSane is written in GTK+ and provides control for
    performing the scan and then manipulating the captured image.
    
  • No added dependencies
  • No removed dependencies
yelp-2.16.0-15.el5 - yelp-2.16.0-18.el5
  • Group: Applications/System
  • Summary: A system documentation reader from the Gnome project
  • Description:
    Yelp is the Gnome 2 help/documentation browser. It is designed
    to help you browse all the documentation on your system in
    one central tool.
    
  • Added Dependencies:
    • gecko-devel-unstable >= 1.9
  • Removed Dependencies:
    • gecko-devel >= 1.8.0.12
yum-3.0.1-5.el5 - yum-3.2.8-9.el5
  • Group: System Environment/Base
  • Summary: RPM installer/updater
  • Description:
    Yum is a utility that can check for and automatically download and
    install updated RPM packages. Dependencies are obtained and downloaded
    automatically prompting the user as necessary.
    
  • No added dependencies
  • No removed dependencies
yum-metadata-parser-1.0-8.fc6 - yum-metadata-parser-1.1.2-2.el5
  • Group: Development/Libraries
  • Summary: A fast metadata parser for yum
  • Description:
    Fast metadata parser for yum implemented in C.
    
  • No added dependencies
  • No removed dependencies
yum-rhn-plugin-0.5.2-3.el5 - yum-rhn-plugin-0.5.3-6.el5
  • Group: System Environment/Base
  • Summary: RHN support for yum
  • Description:
    This yum plugin provides support for yum to access a Red Hat Network server for
    software updates.
    
  • No added dependencies
  • No removed dependencies
yum-utils-1.0.4-3.el5 - yum-utils-1.1.10-9.el5
  • Group: Development/Tools
  • Summary: Utilities based around the yum package manager
  • Description:
    yum-utils is a collection of utilities and examples for the yum package
    manager. It includes utilities by different authors that make yum easier and
    more powerful to use.
    
  • No added dependencies
  • No removed dependencies

Legal Notice

Copyright © 2008, 2012 Red Hat, Inc..
This document is licensed by Red Hat under the Creative Commons Attribution-ShareAlike 3.0 Unported License. If you distribute this document, or a modified version of it, you must provide attribution to Red Hat, Inc. and provide a link to the original. If the document is modified, all Red Hat trademarks must be removed.
Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.
Red Hat, Red Hat Enterprise Linux, the Shadowman logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.
Linux® is the registered trademark of Linus Torvalds in the United States and other countries.
Java® is a registered trademark of Oracle and/or its affiliates.
XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.
MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.
Node.js® is an official trademark of Joyent. Red Hat Software Collections is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.
The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.
All other trademarks are the property of their respective owners.