[general] # Path to a Public key to install on servers. If a usable key has not # been installed on the remote servers the user will be prompted for a # password and this key will be installed so the password will not be # required again CONFIG_SSH_KEY=/root/.ssh/id_rsa.pub # Set to 'y' if you would like Packstack to install MySQL CONFIG_MYSQL_INSTALL=y # Set to 'y' if you would like Packstack to install OpenStack Image # Service (Glance) CONFIG_GLANCE_INSTALL=y # Set to 'y' if you would like Packstack to install OpenStack Block # Storage (Cinder) CONFIG_CINDER_INSTALL=y # Set to 'y' if you would like Packstack to install OpenStack Compute # (Nova) CONFIG_NOVA_INSTALL=y # Set to 'y' if you would like Packstack to install OpenStack # Networking (Neutron) CONFIG_NEUTRON_INSTALL=y # Set to 'y' if you would like Packstack to install OpenStack # Dashboard (Horizon) CONFIG_HORIZON_INSTALL=y # Set to 'y' if you would like Packstack to install OpenStack Object # Storage (Swift) CONFIG_SWIFT_INSTALL=n # Set to 'y' if you would like Packstack to install OpenStack # Metering (Ceilometer) CONFIG_CEILOMETER_INSTALL=y # Set to 'y' if you would like Packstack to install OpenStack # Orchestration (Heat) CONFIG_HEAT_INSTALL=n # Set to 'y' if you would like Packstack to install the OpenStack # Client packages. An admin "rc" file will also be installed CONFIG_CLIENT_INSTALL=y # Comma separated list of NTP servers. Leave plain if Packstack # should not install ntpd on instances. CONFIG_NTP_SERVERS=ntp.ubuntu.com # Set to 'y' if you would like Packstack to install Nagios to monitor # OpenStack hosts CONFIG_NAGIOS_INSTALL=n # Comma separated list of servers to be excluded from installation in # case you are running Packstack the second time with the same answer # file and don't want Packstack to touch these servers. Leave plain if # you don't need to exclude any server. EXCLUDE_SERVERS= # Set to 'y' if you want to run OpenStack services in debug mode. # Otherwise set to 'n'. CONFIG_DEBUG_MODE=n # The IP address of the server on which to install MySQL CONFIG_MYSQL_HOST=192.168.80.100 # Username for the MySQL admin user CONFIG_MYSQL_USER=root # Password for the MySQL admin user CONFIG_MYSQL_PW=Cisco123 # The IP address of the server on which to install the QPID service CONFIG_QPID_HOST=192.168.80.100 # Enable SSL for the QPID service CONFIG_QPID_ENABLE_SSL=n # Enable Authentication for the QPID service CONFIG_QPID_ENABLE_AUTH=n # The password for the NSS certificate database of the QPID service CONFIG_QPID_NSS_CERTDB_PW=b38e9a10780b43f295222fc7bea2fac8 # The port in which the QPID service listens to SSL connections CONFIG_QPID_SSL_PORT=5671 # The filename of the certificate that the QPID service is going to # use CONFIG_QPID_SSL_CERT_FILE=/etc/pki/tls/certs/qpid_selfcert.pem # The filename of the private key that the QPID service is going to # use CONFIG_QPID_SSL_KEY_FILE=/etc/pki/tls/private/qpid_selfkey.pem # Auto Generates self signed SSL certificate and key CONFIG_QPID_SSL_SELF_SIGNED=y # User for qpid authentication CONFIG_QPID_AUTH_USER=qpid_user # Password for user authentication CONFIG_QPID_AUTH_PASSWORD=74bec9cb85404253 # The IP address of the server on which to install Keystone CONFIG_KEYSTONE_HOST=192.168.80.100 # The password to use for the Keystone to access DB CONFIG_KEYSTONE_DB_PW=d8f48f3dd90b4f6b # The token to use for the Keystone service api CONFIG_KEYSTONE_ADMIN_TOKEN=405dc51066af4c2ea7aa6607b879bc84 # The password to use for the Keystone admin user CONFIG_KEYSTONE_ADMIN_PW=Cisco123 # The password to use for the Keystone demo user CONFIG_KEYSTONE_DEMO_PW=Cisco123 # Kestone token format. Use either UUID or PKI CONFIG_KEYSTONE_TOKEN_FORMAT=PKI # The IP address of the server on which to install Glance CONFIG_GLANCE_HOST=192.168.80.100 # The password to use for the Glance to access DB CONFIG_GLANCE_DB_PW=c40fc136ba634093 # The password to use for the Glance to authenticate with Keystone CONFIG_GLANCE_KS_PW=11fe8f58bfe14ab4 # The IP address of the server on which to install Cinder CONFIG_CINDER_HOST=192.168.80.100 # The password to use for the Cinder to access DB CONFIG_CINDER_DB_PW=0c83b394eff54951 # The password to use for the Cinder to authenticate with Keystone CONFIG_CINDER_KS_PW=2e853eff92b9488c # The Cinder backend to use, valid options are: lvm, gluster, nfs CONFIG_CINDER_BACKEND=lvm # Create Cinder's volumes group. This should only be done for testing # on a proof-of-concept installation of Cinder. This will create a # file-backed volume group and is not suitable for production usage. CONFIG_CINDER_VOLUMES_CREATE=y # Cinder's volumes group size. Note that actual volume size will be # extended with 3% more space for VG metadata. CONFIG_CINDER_VOLUMES_SIZE=4G # A single or comma separated list of gluster volume shares to mount, # eg: ip-address:/vol-name, domain:/vol-name CONFIG_CINDER_GLUSTER_MOUNTS= # A single or comma seprated list of NFS exports to mount, eg: ip- # address:/export-name CONFIG_CINDER_NFS_MOUNTS= # The IP address of the server on which to install the Nova API # service CONFIG_NOVA_API_HOST=192.168.80.100 # The IP address of the server on which to install the Nova Cert # service CONFIG_NOVA_CERT_HOST=192.168.80.100 # The IP address of the server on which to install the Nova VNC proxy CONFIG_NOVA_VNCPROXY_HOST=192.168.80.100 # A comma separated list of IP addresses on which to install the Nova # Compute services CONFIG_NOVA_COMPUTE_HOSTS=192.168.80.100 # The IP address of the server on which to install the Nova Conductor # service CONFIG_NOVA_CONDUCTOR_HOST=192.168.80.100 # The password to use for the Nova to access DB CONFIG_NOVA_DB_PW=aa66b24c759e4ec0 # The password to use for the Nova to authenticate with Keystone CONFIG_NOVA_KS_PW=32d1c9e7d5334d30 # The IP address of the server on which to install the Nova Scheduler # service CONFIG_NOVA_SCHED_HOST=192.168.80.100 # The overcommitment ratio for virtual to physical CPUs. Set to 1.0 # to disable CPU overcommitment CONFIG_NOVA_SCHED_CPU_ALLOC_RATIO=16.0 # The overcommitment ratio for virtual to physical RAM. Set to 1.0 to # disable RAM overcommitment CONFIG_NOVA_SCHED_RAM_ALLOC_RATIO=1.5 # Private interface for Flat DHCP on the Nova compute servers CONFIG_NOVA_COMPUTE_PRIVIF=eth1 # The list of IP addresses of the server on which to install the Nova # Network service CONFIG_NOVA_NETWORK_HOSTS=192.168.80.100 # Nova network manager CONFIG_NOVA_NETWORK_MANAGER=nova.network.manager.FlatDHCPManager # Public interface on the Nova network server CONFIG_NOVA_NETWORK_PUBIF=eth0 # Private interface for network manager on the Nova network server CONFIG_NOVA_NETWORK_PRIVIF=eth1 # IP Range for network manager CONFIG_NOVA_NETWORK_FIXEDRANGE=192.168.32.0/22 # IP Range for Floating IP's CONFIG_NOVA_NETWORK_FLOATRANGE=10.3.4.0/22 # Name of the default floating pool to which the specified floating # ranges are added to CONFIG_NOVA_NETWORK_DEFAULTFLOATINGPOOL=nova # Automatically assign a floating IP to new instances CONFIG_NOVA_NETWORK_AUTOASSIGNFLOATINGIP=n # First VLAN for private networks CONFIG_NOVA_NETWORK_VLAN_START=100 # Number of networks to support CONFIG_NOVA_NETWORK_NUMBER=1 # Number of addresses in each private subnet CONFIG_NOVA_NETWORK_SIZE=255 # The IP addresses of the server on which to install the Neutron # server CONFIG_NEUTRON_SERVER_HOST=192.168.80.100 # The password to use for Neutron to authenticate with Keystone CONFIG_NEUTRON_KS_PW=6b541cf43f5c45aa # The password to use for Neutron to access DB CONFIG_NEUTRON_DB_PW=8eb873595b8046af # A comma separated list of IP addresses on which to install Neutron # L3 agent CONFIG_NEUTRON_L3_HOSTS=192.168.80.100 # The name of the bridge that the Neutron L3 agent will use for # external traffic, or 'provider' if using provider networks CONFIG_NEUTRON_L3_EXT_BRIDGE=br-ex # A comma separated list of IP addresses on which to install Neutron # DHCP agent CONFIG_NEUTRON_DHCP_HOSTS=192.168.80.100 # A comma separated list of IP addresses on which to install Neutron # LBaaS agent CONFIG_NEUTRON_LBAAS_HOSTS=192.168.80.100 # The name of the L2 plugin to be used with Neutron CONFIG_NEUTRON_L2_PLUGIN=openvswitch # A comma separated list of IP addresses on which to install Neutron # metadata agent CONFIG_NEUTRON_METADATA_HOSTS=192.168.80.100 # A comma separated list of IP addresses on which to install Neutron # metadata agent CONFIG_NEUTRON_METADATA_PW=d8e6e89786f0478b # A comma separated list of network type driver entrypoints to be # loaded from the neutron.ml2.type_drivers namespace. CONFIG_NEUTRON_ML2_TYPE_DRIVERS=local # A comma separated ordered list of network_types to allocate as # tenant networks. The value 'local' is only useful for single-box # testing but provides no connectivity between hosts. CONFIG_NEUTRON_ML2_TENANT_NETWORK_TYPES=local # A comma separated ordered list of networking mechanism driver # entrypoints to be loaded from the neutron.ml2.mechanism_drivers # namespace. CONFIG_NEUTRON_ML2_MECHANISM_DRIVERS=openvswitch # A comma separated list of physical_network names with which flat # networks can be created. Use * to allow flat networks with arbitrary # physical_network names. CONFIG_NEUTRON_ML2_FLAT_NETWORKS=* # A comma separated list of :: # or specifying physical_network names usable for # VLAN provider and tenant networks, as well as ranges of VLAN tags on # each available for allocation to tenant networks. CONFIG_NEUTRON_ML2_VLAN_RANGES= # A comma separated list of : tuples enumerating # ranges of GRE tunnel IDs that are available for tenant network # allocation. Should be an array with tun_max +1 - tun_min > 1000000 CONFIG_NEUTRON_ML2_TUNNEL_ID_RANGES= # Multicast group for VXLAN. If unset, disables VXLAN enable sending # allocate broadcast traffic to this multicast group. When left # unconfigured, will disable multicast VXLAN mode. Should be an # Multicast IP (v4 or v6) address. CONFIG_NEUTRON_ML2_VXLAN_GROUP= # A comma separated list of : tuples enumerating # ranges of VXLAN VNI IDs that are available for tenant network # allocation. Min value is 0 and Max value is 16777215. CONFIG_NEUTRON_ML2_VNI_RANGES= # The name of the L2 agent to be used with Neutron CONFIG_NEUTRON_L2_AGENT=openvswitch # The type of network to allocate for tenant networks (eg. vlan, # local) CONFIG_NEUTRON_LB_TENANT_NETWORK_TYPE=local # A comma separated list of VLAN ranges for the Neutron linuxbridge # plugin (eg. physnet1:1:4094,physnet2,physnet3:3000:3999) CONFIG_NEUTRON_LB_VLAN_RANGES= # A comma separated list of interface mappings for the Neutron # linuxbridge plugin (eg. physnet1:br-eth1,physnet2:br-eth2,physnet3 # :br-eth3) CONFIG_NEUTRON_LB_INTERFACE_MAPPINGS= # Type of network to allocate for tenant networks (eg. vlan, local, # gre, vxlan) CONFIG_NEUTRON_OVS_TENANT_NETWORK_TYPE=local # A comma separated list of VLAN ranges for the Neutron openvswitch # plugin (eg. physnet1:1:4094,physnet2,physnet3:3000:3999) CONFIG_NEUTRON_OVS_VLAN_RANGES=physnet1:1:1000 # A comma separated list of bridge mappings for the Neutron # openvswitch plugin (eg. physnet1:br-eth1,physnet2:br-eth2,physnet3 # :br-eth3) CONFIG_NEUTRON_OVS_BRIDGE_MAPPINGS=physnet1:br-ex # A comma separated list of colon-separated OVS bridge:interface # pairs. The interface will be added to the associated bridge. CONFIG_NEUTRON_OVS_BRIDGE_IFACES=br-ex:eth1 # A comma separated list of tunnel ranges for the Neutron openvswitch # plugin (eg. 1:1000) CONFIG_NEUTRON_OVS_TUNNEL_RANGES=1000:2000 # The interface for the OVS tunnel. Packstack will override the IP # address used for tunnels on this hypervisor to the IP found on the # specified interface. (eg. eth1) CONFIG_NEUTRON_OVS_TUNNEL_IF=192.168.80.100 # VXLAN UDP port CONFIG_NEUTRON_OVS_VXLAN_UDP_PORT=4789 # The IP address of the server on which to install the OpenStack # client packages. An admin "rc" file will also be installed CONFIG_OSCLIENT_HOST=192.168.80.100 # The IP address of the server on which to install Horizon CONFIG_HORIZON_HOST=192.168.80.100 # To set up Horizon communication over https set this to "y" CONFIG_HORIZON_SSL=n # PEM encoded certificate to be used for ssl on the https server, # leave blank if one should be generated, this certificate should not # require a passphrase CONFIG_SSL_CERT= # Keyfile corresponding to the certificate if one was entered CONFIG_SSL_KEY= # The IP address on which to install the Swift proxy service # (currently only single proxy is supported) CONFIG_SWIFT_PROXY_HOSTS=192.168.80.100 # The password to use for the Swift to authenticate with Keystone CONFIG_SWIFT_KS_PW=67b8ef48c96a4e10 # A comma separated list of IP addresses on which to install the # Swift Storage services, each entry should take the format # [/dev], for example 127.0.0.1/vdb will install /dev/vdb # on 127.0.0.1 as a swift storage device(packstack does not create the # filesystem, you must do this first), if /dev is omitted Packstack # will create a loopback device for a test setup CONFIG_SWIFT_STORAGE_HOSTS=192.168.80.100 # Number of swift storage zones, this number MUST be no bigger than # the number of storage devices configured CONFIG_SWIFT_STORAGE_ZONES=1 # Number of swift storage replicas, this number MUST be no bigger # than the number of storage zones configured CONFIG_SWIFT_STORAGE_REPLICAS=1 # FileSystem type for storage nodes CONFIG_SWIFT_STORAGE_FSTYPE=ext4 # Shared secret for Swift CONFIG_SWIFT_HASH=b2d5fac1c97f46e2 # Size of the swift loopback file storage device CONFIG_SWIFT_STORAGE_SIZE=2G # Whether to provision for demo usage and testing CONFIG_PROVISION_DEMO=n # The CIDR network address for the floating IP subnet CONFIG_PROVISION_DEMO_FLOATRANGE=192.168.81.0/24 # Whether to configure tempest for testing CONFIG_PROVISION_TEMPEST=n # The uri of the tempest git repository to use CONFIG_PROVISION_TEMPEST_REPO_URI=https://github.com/openstack/tempest.git # The revision of the tempest git repository to use CONFIG_PROVISION_TEMPEST_REPO_REVISION=stable/havana # Whether to configure the ovs external bridge in an all-in-one # deployment CONFIG_PROVISION_ALL_IN_ONE_OVS_BRIDGE=n # The IP address of the server on which to install Heat service CONFIG_HEAT_HOST=192.168.80.100 # The password used by Heat user to authenticate against MySQL CONFIG_HEAT_DB_PW=b8cda22c57cf40fc # The password to use for the Heat to authenticate with Keystone CONFIG_HEAT_KS_PW=d02d2302a60a4ea7 # Set to 'y' if you would like Packstack to install Heat CloudWatch # API CONFIG_HEAT_CLOUDWATCH_INSTALL=n # Set to 'y' if you would like Packstack to install Heat # CloudFormation API CONFIG_HEAT_CFN_INSTALL=n # The IP address of the server on which to install Heat CloudWatch # API service CONFIG_HEAT_CLOUDWATCH_HOST=192.168.80.100 # The IP address of the server on which to install Heat # CloudFormation API service CONFIG_HEAT_CFN_HOST=192.168.80.100 # The IP address of the server on which to install Ceilometer CONFIG_CEILOMETER_HOST=192.168.80.100 # Secret key for signing metering messages. CONFIG_CEILOMETER_SECRET=62fee0dfb3964aa8 # The password to use for Ceilometer to authenticate with Keystone CONFIG_CEILOMETER_KS_PW=d63f3f4dadd6441a # The IP address of the server on which to install the Nagios server CONFIG_NAGIOS_HOST=192.168.80.100 # The password of the nagiosadmin user on the Nagios server CONFIG_NAGIOS_PW=0f2563dc56b64454 # To subscribe each server to EPEL enter "y" CONFIG_USE_EPEL=n # A comma separated list of URLs to any additional yum repositories # to install CONFIG_REPO= # To subscribe each server with Red Hat subscription manager, include # this with CONFIG_RH_PW CONFIG_RH_USER= # To subscribe each server with Red Hat subscription manager, include # this with CONFIG_RH_USER CONFIG_RH_PW= # To subscribe each server to Red Hat Enterprise Linux 6 Server Beta # channel (only needed for Preview versions of RHOS) enter "y" CONFIG_RH_BETA_REPO=n # To subscribe each server with RHN Satellite,fill Satellite's URL # here. Note that either satellite's username/password or activation # key has to be provided CONFIG_SATELLITE_URL= # Username to access RHN Satellite CONFIG_SATELLITE_USER= # Password to access RHN Satellite CONFIG_SATELLITE_PW= # Activation key for subscription to RHN Satellite CONFIG_SATELLITE_AKEY= # Specify a path or URL to a SSL CA certificate to use CONFIG_SATELLITE_CACERT= # If required specify the profile name that should be used as an # identifier for the system in RHN Satellite CONFIG_SATELLITE_PROFILE= # Comma separated list of flags passed to rhnreg_ks. Valid flags are: # novirtinfo, norhnsd, nopackages CONFIG_SATELLITE_FLAGS= # Specify a HTTP proxy to use with RHN Satellite CONFIG_SATELLITE_PROXY= # Specify a username to use with an authenticated HTTP proxy CONFIG_SATELLITE_PROXY_USER= # Specify a password to use with an authenticated HTTP proxy. CONFIG_SATELLITE_PROXY_PW=