4.7. Configuring Fencing for Cluster Members
4.7.1. Configuring a Single Fence Device for a Node
- From the cluster-specific page, you can configure fencing for the nodes in the cluster by clicking on luci page.along the top of the cluster display. This displays the nodes that constitute the cluster. This is also the default page that appears when you click on the cluster name beneath from the menu on the left side of the
- Click on a node name. Clicking a link for a node causes a page to be displayed for that link showing how that node is configured.The node-specific page displays any services that are currently running on the node, as well as any failover domains of which this node is a member. You can modify an existing failover domain by clicking on its name. For information on configuring failover domains, see 節 4.8, “Configuring a Failover Domain”.
- On the node-specific page, under, click . This displays the dialog box.
- Enter afor the fencing method that you are configuring for this node. This is an arbitrary name that will be used by Red Hat High Availability Add-On; it is not the same as the DNS name for the device.
- Click. This displays the node-specific screen that now displays the method you have just added under .
- Configure a fence instance for this method by clicking the 節 4.6.1, “Creating a Fence Device”.button that appears beneath the fence method. This displays the drop-down menu from which you can select a fence device you have previously configured, as described in
- Select a fence device for this method. If this fence device requires that you configure node-specific parameters, the display shows the parameters to configure. For information on fencing parameters, refer to 附錄 A, Fence Device Parameters.
注意For non-power fence methods (that is, SAN/storage fencing),is selected by default on the node-specific parameters display. This ensures that a fenced node's access to storage is not re-enabled until the node has been rebooted. When you configure a device that requires unfencing, the cluster must first be stopped and the full configuration including devices and unfencing must be added before the cluster is started. For information on unfencing a node, refer to the
fence_node(8) man page.
- Click. This returns you to the node-specific screen with the fence method and fence instance displayed.