章 6. Configuring Red Hat High Availability Add-On With the ccs Command
ccscluster configuration command. The
ccscommand allows an administrator to create, modify and view the
cluster.confcluster configuration file. You can use the
ccscommand to configure a cluster configuration file on a local file system or on a remote node. Using the
ccscommand, an administrator can also start and stop the cluster services on one or all of the nodes in a configured cluster.
ccscommand. For information on using the
ccscommand to manage a running cluster, see 章 7, Managing Red Hat High Availability Add-On With ccs.
cluster.confelements and attributes. For a comprehensive list and description of
cluster.confelements and attributes, refer to the cluster schema at
/usr/share/cluster/cluster.rng, and the annotated schema at
6.1. Operational Overview
ccscommand to configure a cluster:
6.1.1. Creating the Cluster Configuration File on a Local System
ccscommand, you can create a cluster configuration file on a cluster node, or you can create a cluster configuration file on a local file system and then send that file to a host in a cluster. This allows you to work on a file from a local machine, where you can maintain it under version control or otherwise tag the file according to your needs. Using the
ccscommand does not require root privilege.
ccscommand, you use the
-hoption to specify the name of the host. This creates and edits the
/etc/cluster/cluster.conffile on the host:
ccs -h host [options]
-foption of the
ccscommand to specify the name of the configuration file when you perform a cluster operation. You can name this file anything you want.
ccs -f file [options]
-fparameter of the
ccswill attempt to connect to the localhost. This is the equivalent of specifying
--setconfoption of the
ccscommand. On a host machine in a cluster, the file you send will be named
cluster.confand it will be placed in the
ccs -h host -f file --setconf
--setconfoption of the
ccscommand, see 節 6.15, “Propagating the Configuration File to the Cluster Nodes”.
6.1.2. Viewing the Current Cluster Configuration
ccs -h host --getconf
-foption instead of the
-hoption, as described in 節 6.1.1, “Creating the Cluster Configuration File on a Local System”.
6.1.3. Specifying ricci Passwords with the ccs Command
ccscommands that distribute copies of the
cluster.conffile to the nodes of a cluster requires that ricci be installed and running on the cluster nodes, as described in 節 3.13, “Considerations for
ricci”. Using ricci requires a password the first time you interact with ricci from any specific machine.
ccscommand requires it. Alternately, you can use the
-poption to specify a ricci password on the command line.
ccs -h host -p password --sync --activate
cluster.conffile to all of the nodes in the cluster with the
--syncoption of the
ccscommand and you specify a ricci password for the command, the
ccscommand will use that password for each node in the cluster. If you need to set different passwords for ricci on individual nodes, you can use the
--setconfoption with the
-poption to distribute the configuration file to one node at a time.
6.1.4. Modifying Cluster Configuration Components
ccscommand to configure cluster components and their attributes in the cluster configuration file. After you have added a cluster component to the file, in order to modify the attributes of that component you must remove the component you have defined and add the component again, with the modified attributes. Information on how to do this with each component is provided in the individual sections of this chapter.
cmancluster component provide an exception to this procedure for modifying cluster components. To modify these attributes, you execute the
--setcmanoption of the
ccscommand, specifying the new attributes. Note that specifying this option resets all values that you do not explicitly specify to their default values, as described in 節 6.1.5, “Commands that Overwrite Previous Settings”.
6.1.5. Commands that Overwrite Previous Settings
ccscommand that implement overwriting semantics when setting properties. This means that you can issue the
ccscommand with one of these options without specifying any settings, and it will reset all settings to their default values. These options are as follows:
ccs -h hostname --setfencedaemon
post_fail_delayproperty to 5:
ccs -h hostname --setfencedaemon post_fail_delay=5
post_join_delayproperty to 10, the
post_fail_delayproperty will be restored to its default value:
ccs -h hostname --setfencedaemon post_join_delay=10
post_join_delayproperties, you indicate them both on the same command, as in the following example:
ccs -h hostname --setfencedaemon post_fail_delay=5 post_join_delay=10
6.1.6. Configuration Validation
ccscommand to create and edit the cluster configuration file, the configuration is automatically validated according to the cluster schema. As of the Red Hat Enterprise Linux 6.3 release, the
ccscommand validates the configuration according to the cluster schema at
/usr/share/cluster/cluster.rngon the node that you specify with the
-hoption. Previously the
ccscommand always used the cluster schema that was packaged with the
/usr/share/ccs/cluster.rngon the local system. When you use the
-foption to specify the local system, the
ccscommand still uses the cluster schema
/usr/share/ccs/cluster.rngthat was packaged with the
ccscommand itself on that system.