Red Hat Training

A Red Hat training course is available for Red Hat Enterprise Linux

12.3. Linux 虛​​​​​​​擬​​​​​​​主​​​​​​​控​​​​​​​台​​​​​​​注​​​​​​​意​​​​​​​事​​​​​​​項​​​​​​​

This information only applies to users of non-partitioned System p systems using a video card as their console. Users of partitioned System i and System p systems should skip to 節 12.4, “使​​​​​​​用​​​​​​​ HMC vterm”.
Red Hat Enterprise Linux 安​​​​​​​裝​​​​​​​程​​​​​​​式​​​​​​​提​​​​​​​供​​​​​​​了​​​​​​​不​​​​​​​只​​​​​​​是​​​​​​​安​​​​​​​裝​​​​​​​過​​​​​​​程​​​​​​​的​​​​​​​對​​​​​​​話​​​​​​​視​​​​​​​窗​​​​​​​。​​​​​​​您​​​​​​​可​​​​​​​以​​​​​​​使​​​​​​​用​​​​​​​許​​​​​​​多​​​​​​​種​​​​​​​不​​​​​​​同​​​​​​​的​​​​​​​系​​​​​​​統​​​​​​​診​​​​​​​斷​​​​​​​訊​​​​​​​息​​​​​​​,也​​​​​​​可​​​​​​​以​​​​​​​讓​​​​​​​您​​​​​​​可​​​​​​​以​​​​​​​在​​​​​​​ shell 提​​​​​​​示​​​​​​​符​​​​​​​號​​​​​​​下​​​​​​​輸​​​​​​​入​​​​​​​指​​​​​​​令​​​​​​​。​​​​​​​安​​​​​​​裝​​​​​​​程​​​​​​​式​​​​​​​會​​​​​​​在​​​​​​​五​​​​​​​個​​​​​​​虛​​​​​​​擬​​​​​​​主​​​​​​​控​​​​​​​台​​​​​​​中​​​​​​​顯​​​​​​​示​​​​​​​這​​​​​​​些​​​​​​​訊​​​​​​​息​​​​​​​。​​​​​​​您​​​​​​​可​​​​​​​以​​​​​​​使​​​​​​​用​​​​​​​單​​​​​​​一​​​​​​​的​​​​​​​按​​​​​​​鍵​​​​​​​組​​​​​​​合​​​​​​​來​​​​​​​切​​​​​​​換​​​​​​​到​​​​​​​不​​​​​​​同​​​​​​​的​​​​​​​主​​​​​​​控​​​​​​​台​​​​​​​。​​​​​​​
一​​​​​​​個​​​​​​​虛​​​​​​​擬​​​​​​​主​​​​​​​控​​​​​​​台​​​​​​​是​​​​​​​在​​​​​​​一​​​​​​​個​​​​​​​非​​​​​​​圖​​​​​​​形​​​​​​​環​​​​​​​境​​​​​​​的​​​​​​​一​​​​​​​個​​​​​​​ shell 提​​​​​​​示​​​​​​​符​​​​​​​號​​​​​​​,使​​​​​​​您​​​​​​​從​​​​​​​實​​​​​​​體​​​​​​​的​​​​​​​機​​​​​​​器​​​​​​​存​​​​​​​取​​​​​​​,而​​​​​​​非​​​​​​​從​​​​​​​遠​​​​​​​端​​​​​​​登​​​​​​​入​​​​​​​。​​​​​​​您​​​​​​​還​​​​​​​可​​​​​​​以​​​​​​​同​​​​​​​時​​​​​​​存​​​​​​​取​​​​​​​多​​​​​​​個​​​​​​​虛​​​​​​​擬​​​​​​​主​​​​​​​控​​​​​​​台​​​​​​​。​​​​​​​
These virtual consoles can be helpful if you encounter a problem while installing Red Hat Enterprise Linux. Messages displayed on the installation or system consoles can help pinpoint a problem. Refer to 表格 12.1, “主​​​​​​​控​​​​​​​台​​​​​​​、​​​​​​​按​​​​​​​鍵​​​​​​​組​​​​​​​合​​​​​​​與​​​​​​​內​​​​​​​容​​​​​​​” for a listing of the virtual consoles, keystrokes used to switch to them, and their contents.
基​​​​​​​本​​​​​​​上​​​​​​​,在​​​​​​​圖​​​​​​​形​​​​​​​安​​​​​​​裝​​​​​​​過​​​​​​​程​​​​​​​中​​​​​​​您​​​​​​​不​​​​​​​需​​​​​​​要​​​​​​​關​​​​​​​閉​​​​​​​預​​​​​​​設​​​​​​​的​​​​​​​主​​​​​​​控​​​​​​​台​​​​​​​(虛​​​​​​​擬​​​​​​​主​​​​​​​控​​​​​​​台​​​​​​​ #6),除​​​​​​​非​​​​​​​您​​​​​​​要​​​​​​​試​​​​​​​著​​​​​​​診​​​​​​​斷​​​​​​​安​​​​​​​裝​​​​​​​的​​​​​​​問​​​​​​​題​​​​​​​。​​​​​​​

表格 12.1. 主​​​​​​​控​​​​​​​台​​​​​​​、​​​​​​​按​​​​​​​鍵​​​​​​​組​​​​​​​合​​​​​​​與​​​​​​​內​​​​​​​容​​​​​​​

主​​​​​​​控​​​​​​​台​​​​​​​ 按​​​​​​​鍵​​​​​​​組​​​​​​​合​​​​​​​ 內​​​​​​​容​​​​​​​
1 ctrl+alt+f1 安​​​​​​​裝​​​​​​​對​​​​​​​話​​​​​​​
2 ctrl+alt+f2 shell 提​​​​​​​示​​​​​​​符​​​​​​​號​​​​​​​
3 ctrl+alt+f3 安​​​​​​​裝​​​​​​​紀​​​​​​​錄​​​​​​​(來​​​​​​​自​​​​​​​安​​​​​​​裝​​​​​​​程​​​​​​​式​​​​​​​的​​​​​​​訊​​​​​​​息​​​​​​​)
4 ctrl+alt+f4 系​​​​​​​統​​​​​​​相​​​​​​​關​​​​​​​的​​​​​​​訊​​​​​​​息​​​​​​​
5 ctrl+alt+f5 其​​​​​​​它​​​​​​​訊​​​​​​​息​​​​​​​
6 ctrl+alt+f6 X 圖​​​​​​​形​​​​​​​顯​​​​​​​示​​​​​​​