Red Hat Training

A Red Hat training course is available for Red Hat Enterprise Linux

4.3.2. 在​​​​​​​ Itanium 系​​​​​​​統​​​​​​​上​​​​​​​啟​​​​​​​動​​​​​​​安​​​​​​​裝​​​​​​​程​​​​​​​式​​​​​​​

Your Itanium system should be able to boot the Red Hat Enterprise Linux installation program directly from the Red Hat Enterprise Linux CD #1. If your Itanium cannot boot the installation program from the CD-ROM (or if you want to perform a hard drive, NFS, FTP, or HTTP installation) you must boot from an LS-120 diskette. Refer to 節 4.3.2.2, “從​​​​​​​ LS-120 磁​​​​​​​碟​​​​​​​片​​​​​​​啟​​​​​​​動​​​​​​​安​​​​​​​裝​​​​​​​程​​​​​​​式​​​​​​​” for more information.

4.3.2.1. 從​​​​​​​ DVD/CD-ROM 光​​​​​​​碟​​​​​​​啟​​​​​​​動​​​​​​​安​​​​​​​裝​​​​​​​程​​​​​​​式​​​​​​​

如​​​​​​​要​​​​​​​從​​​​​​​ Red Hat Enterprise Linux 的​​​​​​​CD-ROM #1 開​​​​​​​機​​​​​​​，請​​​​​​​遵​​​​​​​照​​​​​​​這​​​​​​​些​​​​​​​步​​​​​​​驟​​​​​​​：
  1. 移​​​​​​​除​​​​​​​除​​​​​​​了​​​​​​​ Red Hat Enterprise Linux CD-ROM #1 的​​​​​​​所​​​​​​​有​​​​​​​媒​​​​​​​體​​​​​​​。​​​​​​​
  2. 請​​​​​​​在​​​​​​​ Boot Option 的​​​​​​​選​​​​​​​單​​​​​​​選​​​​​​​擇​​​​​​​ EFI Shell。​​​​​​​
  3. At the Shell> prompt, change to the file system on the CD-ROM. For example, in the above sample map output, the system partition on the CD-ROM is fs1. To change to the fs1 file system, type fs1: at the prompt.
  4. 請​​​​​​​輸​​​​​​​入​​​​​​​ elilo linux 以​​​​​​​啟​​​​​​​動​​​​​​​安​​​​​​​裝​​​​​​​程​​​​​​​式​​​​​​​。​​​​​​​
  5. Go to 章 4, 在​​​​​​​ Intel® 和​​​​​​​ AMD 系​​​​​​​統​​​​​​​上​​​​​​​進​​​​​​​行​​​​​​​安​​​​​​​裝​​​​​​​ to begin the installation.