Red Hat Training

A Red Hat training course is available for Red Hat Enterprise Linux

17.14.2. Disk Druid's Buttons

These buttons control Disk Druid's actions. They are used to change the attributes of a partition (for example the file system type and mount point) and also to create RAID devices. Buttons on this screen are also used to accept the changes you have made, or to exit Disk Druid. For further explanation, take a look at each button in order:
  • 編​​​​​​​輯​​​​​​​：用​​​​​​​來​​​​​​​更​​​​​​​改​​​​​​​目​​​​​​​前​​​​​​​在​​​​​​​ 分​​​​​​​割​​​​​​​區​​​​​​​ 部​​​​​​​份​​​​​​​選​​​​​​​取​​​​​​​之​​​​​​​分​​​​​​​割​​​​​​​區​​​​​​​的​​​​​​​屬​​​​​​​性​​​​​​​。​​​​​​​選​​​​​​​取​​​​​​​ 編​​​​​​​輯​​​​​​​ 將​​​​​​​會​​​​​​​開​​​​​​​啟​​​​​​​一​​​​​​​個​​​​​​​對​​​​​​​話​​​​​​​視​​​​​​​窗​​​​​​​。​​​​​​​可​​​​​​​以​​​​​​​編​​​​​​​輯​​​​​​​部​​​​​​​份​​​​​​​或​​​​​​​全​​​​​​​部​​​​​​​的​​​​​​​欄​​​​​​​位​​​​​​​，依​​​​​​​照​​​​​​​於​​​​​​​分​​​​​​​割​​​​​​​區​​​​​​​的​​​​​​​資​​​​​​​訊​​​​​​​是​​​​​​​否​​​​​​​已​​​​​​​經​​​​​​​被​​​​​​​寫​​​​​​​入​​​​​​​到​​​​​​​磁​​​​​​​碟​​​​​​​。​​​​​​​
  • RAID：使​​​​​​​用​​​​​​​來​​​​​​​提​​​​​​​供​​​​​​​多​​​​​​​餘​​​​​​​資​​​​​​​料​​​​​​​（redundancy）給​​​​​​​任​​​​​​​何​​​​​​​或​​​​​​​所​​​​​​​有​​​​​​​磁​​​​​​​碟​​​​​​​分​​​​​​​割​​​​​​​區​​​​​​​。​​​​​​​除​​​​​​​非​​​​​​​您​​​​​​​有​​​​​​​使​​​​​​​用​​​​​​​ RAID 的​​​​​​​經​​​​​​​驗​​​​​​​，否​​​​​​​則​​​​​​​不​​​​​​​建​​​​​​​議​​​​​​​您​​​​​​​使​​​​​​​用​​​​​​​。​​​​​​​ 更​​​​​​​多​​​​​​​相​​​​​​​關​​​​​​​ RAID 的​​​​​​​資​​​​​​​訊​​​​​​​，請​​​​​​​參​​​​​​​照​​​​​​​ Red Hat Enterprise Linux Deployment Guide。​​​​​​​
    要​​​​​​​建​​​​​​​立​​​​​​​一​​​​​​​個​​​​​​​ RAID 裝​​​​​​​置​​​​​​​，您​​​​​​​必​​​​​​​須​​​​​​​先​​​​​​​建​​​​​​​立​​​​​​​軟​​​​​​​體​​​​​​​ RAID 分​​​​​​​割​​​​​​​區​​​​​​​。​​​​​​​一​​​​​​​旦​​​​​​​您​​​​​​​已​​​​​​​經​​​​​​​建​​​​​​​立​​​​​​​兩​​​​​​​個​​​​​​​或​​​​​​​更​​​​​​​多​​​​​​​的​​​​​​​軟​​​​​​​體​​​​​​​ RAID 分​​​​​​​割​​​​​​​區​​​​​​​，選​​​​​​​擇​​​​​​​ RAID，來​​​​​​​連​​​​​​​接​​​​​​​軟​​​​​​​體​​​​​​​ RAID 分​​​​​​​割​​​​​​​區​​​​​​​到​​​​​​​一​​​​​​​個​​​​​​​ RAID 裝​​​​​​​置​​​​​​​。​​​​​​​