Red Hat Training

A Red Hat training course is available for Red Hat Enterprise Linux

17.14. 磁​​​​​​​碟​​​​​​​分​​​​​​​割​​​​​​​您​​​​​​​的​​​​​​​系​​​​​​​統​​​​​​​

If you chose to create a custom layout, you must tell the installation program where to install Red Hat Enterprise Linux. This is done by defining mount points for one or more disk partitions in which Red Hat Enterprise Linux is installed.
使​​​​​​​用​​​​​​​ Disk Druid 做​​​​​​​磁​​​​​​​碟​​​​​​​分​​​​​​​割​​​​​​​

圖形 17.13. 使​​​​​​​用​​​​​​​ Disk Druid 做​​​​​​​磁​​​​​​​碟​​​​​​​分​​​​​​​割​​​​​​​

安​​​​​​​裝​​​​​​​程​​​​​​​式​​​​​​​所​​​​​​​使​​​​​​​用​​​​​​​的​​​​​​​磁​​​​​​​碟​​​​​​​分​​​​​​​割​​​​​​​工​​​​​​​具​​​​​​​是​​​​​​​ Disk Druid。​​​​​​​除​​​​​​​了​​​​​​​某​​​​​​​些​​​​​​​特​​​​​​​定​​​​​​​的​​​​​​​例​​​​​​​外​​​​​​​狀​​​​​​​況​​​​​​​外​​​​​​​，Disk Druid 可​​​​​​​對​​​​​​​應​​​​​​​基​​​​​​​本​​​​​​​安​​​​​​​裝​​​​​​​上​​​​​​​的​​​​​​​磁​​​​​​​碟​​​​​​​分​​​​​​​割​​​​​​​要​​​​​​​求​​​​​​​。​​​​​​​

17.14.1. DASD 裝​​​​​​​置​​​​​​​的​​​​​​​圖​​​​​​​形​​​​​​​顯​​​​​​​示​​​​​​​

Disk Druid 提​​​​​​​供​​​​​​​了​​​​​​​一​​​​​​​個​​​​​​​圖​​​​​​​形​​​​​​​化​​​​​​​的​​​​​​​ DASD 裝​​​​​​​置​​​​​​​。​​​​​​​
使​​​​​​​用​​​​​​​您​​​​​​​的​​​​​​​滑​​​​​​​鼠​​​​​​​，按​​​​​​​一​​​​​​​下​​​​​​​以​​​​​​​選​​​​​​​取​​​​​​​在​​​​​​​圖​​​​​​​形​​​​​​​化​​​​​​​顯​​​​​​​示​​​​​​​裡​​​​​​​的​​​​​​​一​​​​​​​個​​​​​​​特​​​​​​​定​​​​​​​區​​​​​​​域​​​​​​​。​​​​​​​點​​​​​​​兩​​​​​​​下​​​​​​​以​​​​​​​編​​​​​​​輯​​​​​​​一​​​​​​​個​​​​​​​現​​​​​​​有​​​​​​​的​​​​​​​分​​​​​​​割​​​​​​​區​​​​​​​，並​​​​​​​指​​​​​​​定​​​​​​​一​​​​​​​個​​​​​​​掛​​​​​​​載​​​​​​​點​​​​​​​。​​​​​​​
Above the display, you can review the Drive name (such as /dev/dasda), the Geom (which shows the hard disk's geometry and consists of three numbers representing the number of cylinders, heads, and sectors as reported by the hard disk), and the Model of the hard drive as detected by the installation program.
最​​​​​​​後​​​​​​​，請​​​​​​​注​​​​​​​意​​​​​​​與​​​​​​​ /boot 連​​​​​​​結​​​​​​​的​​​​​​​裝​​​​​​​置​​​​​​​。​​​​​​​核​​​​​​​心​​​​​​​檔​​​​​​​案​​​​​​​與​​​​​​​開​​​​​​​機​​​​​​​管​​​​​​​理​​​​​​​程​​​​​​​式​​​​​​​扇​​​​​​​區​​​​​​​會​​​​​​​與​​​​​​​這​​​​​​​個​​​​​​​裝​​​​​​​置​​​​​​​連​​​​​​​結​​​​​​​。​​​​​​​在​​​​​​​最​​​​​​​通​​​​​​​常​​​​​​​的​​​​​​​情​​​​​​​況​​​​​​​下​​​​​​​，第​​​​​​​一​​​​​​​個​​​​​​​ DASD 或​​​​​​​是​​​​​​​ SCSI LUN 會​​​​​​​被​​​​​​​選​​​​​​​取​​​​​​​使​​​​​​​用​​​​​​​，但​​​​​​​某​​​​​​​些​​​​​​​不​​​​​​​常​​​​​​​見​​​​​​​的​​​​​​​情​​​​​​​況​​​​​​​下​​​​​​​這​​​​​​​是​​​​​​​有​​​​​​​可​​​​​​​能​​​​​​​發​​​​​​​生​​​​​​​的​​​​​​​。​​​​​​​當​​​​​​​重​​​​​​​新​​​​​​​ ipl 既​​​​​​​有​​​​​​​安​​​​​​​裝​​​​​​​系​​​​​​​統​​​​​​​時​​​​​​​，裝​​​​​​​置​​​​​​​編​​​​​​​號​​​​​​​會​​​​​​​被​​​​​​​使​​​​​​​用​​​​​​​。​​​​​​​