Red Hat Training
A Red Hat training course is available for Red Hat Enterprise Linux
7.3. 我該如何取得驅動程式媒體?
Driver images can be obtained from several sources. They may be included with Red Hat Enterprise Linux, or they may be available from a hardware or software vendor's website. If you suspect that your system may require one of these drivers, you should create a driver diskette or CD-ROM before beginning your Red Hat Enterprise Linux installation.
對於 x86 系統的使用者,Red Hat Enterprise Linux CD-ROM #1 收錄了驅動程式的映像檔(包括
images/drvnet.img
— 網路卡驅動程式和 images/drvblock.img
— SCSI 控制卡的驅動程式)包含了許多一般以及極少用到的驅動程式。
注意
您也可以通過網路使用一個驅動程式的映像檔,在此不使用
linux dd
開機指令,而是使用 linux dd=url
指令,這裡的 url 可以一個要使用的 HTTP、FTP 或 NFS 位址來取代。
Another option for finding specialized driver information is on Red Hat's website at
在 檔案修正 下。有時受歡迎的硬體發行在 Red Hat Enterprise Linux 之後,因此無法相容於安裝程式中既有的驅動程式,或者包含在 Red Hat Enterprise Linux CD #1 中的驅動程式影像檔。如發生這種情形,Red Hat 的網站中或許會有該驅動程式映像檔的下載連結。
7.3.1. 從映像檔建立驅動程式磁碟片
使用 Red Hat Enterprise Linux 從驅動程式磁碟片映像檔來建立驅動程式磁碟片:
- 請放入一片空白且已格式化過的磁碟片(或 Itanium 系統使用者所需的 LS-120 磁碟片)在 第一個軟碟(或 LS-120)磁碟機。
- 在含有該驅動程式磁碟片映像檔的同一目錄下,例如
drvnet.img
,以 root 身份鍵入dd if=drvnet.img of=/dev/fd0
。
注意
在安裝的過程中 Red Hat Enterprise Linux 支援使用 USB 隨身碟來增加驅動程式映像檔。建議方法為掛載 USB 隨身碟並且複製需要的
driverdisk.img
至 USB 隨身碟。例如:
dd if=driverdisk.img of=/dev/sda
然後在安裝過程中,系統會提示您選擇分割區,並指定要使用的檔案。