-
Language:
English
-
Language:
English
Red Hat Training
A Red Hat training course is available for Red Hat Enterprise Linux
7.2. Fence Device Components to Configure
This procedure consists of the following steps:
- The procedure configures two APC switches as fence devices that will be used as the main fencing method for each node in cluster
backupclust. - The procedure configures the main and backup fencing methods for
clusternode1.example.com, using the two APC switches for the main fencing method for the node and using its IPMI management board as the backup fencing method for the node. - The procedure configures the main and backup fencing methods for
clusternode2.example.com, using the two APC switches for the main fencing method for the node and using its IPMI management board as the backup fencing method for the node. - The procedure configures the main and backup fencing methods for
clusternode3.example.com, using the two APC switches for the main fencing method for the node and using its IPMI management board as the backup fencing method for the node.
Table 7.4, “Fence Device Components to Configure for APC Fence Device” summarizes the components of the APC fence devices that this procedure configures for the nodes in the cluster
backupclust.
Table 7.4. Fence Device Components to Configure for APC Fence Device
| Fence Device Component | Value | Description |
|---|---|---|
| Fencing Type | APC Power Switch | type of fencing device to configure for each APC switch |
| Name | pwr01 | name of the first APC fencing device for node1.example.com, node2.example.com, and node3.example.com |
| IP address | 10.15.86.96 | IP address of the first APC switch to configure as a fence device for node1.example.com, node2.example.com, and node3.example.com |
| Name | pwr02 | name of the second APC fencing device for node1.example.com, node2.example.com, and node3.example.com |
| IP address | 10.15.86.97 | IP address of the second APC switch to configure as a fence device for node1.example.com, node2.example.com, and node3.example.com |
| login | apclogin | login value for the each of the APC switches that control the power for for clusternode1.example.com, clusternode2.example.com, and clusternode3.example.com |
| password | apcpword | password for each of the APC switches that control the power for for clusternode1.example.com, clusternode2.example.com, and clusternode3.example.com |
Table 7.5, “Fence Agent Components to Specify for clusternode1.example.com” summarizes the components of the main and backup fence devices that you specify for the node
clusternode1.example.com.
Table 7.5. Fence Agent Components to Specify for clusternode1.example.com
| Fence Agent Component | Value | Description |
|---|---|---|
| fence device | pwr01 | name of the first APC fence device you defined as a shared device |
| port | 1 | port number on the first APC switch for node1.example.com |
| fence device | pwr02 | name of the second APC fence device you defined as a shared device |
| port | 1 | port number on the second APC switch for clusternode1.example.com |
| Name | ipmifence1 | name of the IPMI fencing device for clusternode1.example.com |
| IP address | 10.15.86.50 | IP address of the IPMI management board for clusternode1.example.com |
| IPMI login | ipmilogin | login identity for the IPMI management board for clusternode1.example.com |
| password | ipmipword | password for the IPMI management board for clusternode1.example.com |
| authentication type | password | authentication type for the IPMI management board for clusternode1.example.com |
Table 7.6, “Fence Agent Components to Specify for clusternode2.example.com” summarizes the components of the main and backup fence devices that you specify for the node
clusternode2.example.com.
Table 7.6. Fence Agent Components to Specify for clusternode2.example.com
| Fence Agent Component | Value | Description |
|---|---|---|
| fence device | pwr01 | name of the first APC fence device you defined as a shared device |
| port | 2 | port number on the first APC switch for node2.example.com |
| fence device | pwr02 | name of the second APC fence device you defined as a shared device |
| port | 2 | port number on the second APC switch for clusternode2.example.com |
| Name | ipmifence2 | name of the IPMI fencing device for clusternode2.example.com |
| IP address | 10.15.86.51 | IP address of the IPMI management board for clusternode2.example.com |
| IPMI login | ipmilogin | login identity for the IPMI management board for clusternode2.example.com |
| password | ipmipword | password for the IPMI management board for clusternode2.example.com |
| authentication type | password | authentication type for the IPMI management board for clusternode2.example.com |
Table 7.7, “Fence Agent Components to Specify for clusternode3.example.com” summarizes the components of the main and backup fence devices that you specify for the node
clusternode3.example.com.
Table 7.7. Fence Agent Components to Specify for clusternode3.example.com
| Fence Agent Component | Value | Description |
|---|---|---|
| fence device | pwr01 | name of the first APC fence device you defined as a shared device |
| port | 3 | port number on the first APC switch for node3.example.com |
| fence device | pwr02 | name of the second APC fence device you defined as a shared device |
| port | 3 | port number on the second APC switch for clusternode3.example.com |
| Name | ipmifence3 | name of the IPMI fencing device for clusternode3.example.com |
| IP address | 10.15.86.52 | IP address of the IPMI management board for clusternode3.example.com |
| IPMI login | ipmilogin | login identity for the IPMI management board for clusternode3.example.com |
| password | ipmipword | password for the IPMI management board for clusternode3.example.com |
| authentication type | password | authentication type for the IPMI management board for clusternode3.example.com |
