12.19. 为​​​​​​​您​​​​​​​的​​​​​​​系​​​​​​​统​​​​​​​分​​​​​​​区​​​​​​​

If you chose one of the three automatic partitioning options and did not select Review, skip ahead to 第 12.20 节 “网​​​​​​​络​​​​​​​配​​​​​​​置​​​​​​​”.
如​​​​​​​果​​​​​​​你​​​​​​​选​​​​​​​择​​​​​​​了​​​​​​​自​​​​​​​动​​​​​​​分​​​​​​​区​​​​​​​并​​​​​​​选​​​​​​​择​​​​​​​了​​​​​​​「​​​​​​​复​​​​​​​审​​​​​​​」​​​​​​​,你​​​​​​​可​​​​​​​以​​​​​​​接​​​​​​​受​​​​​​​目​​​​​​​前​​​​​​​的​​​​​​​分​​​​​​​区​​​​​​​设​​​​​​​置​​​​​​​(点​​​​​​​击​​​​​​​「​​​​​​​下​​​​​​​一​​​​​​​步​​​​​​​」​​​​​​​),或​​​​​​​使​​​​​​​用​​​​​​​手​​​​​​​工​​​​​​​分​​​​​​​区​​​​​​​工​​​​​​​具​​​​​​​ Disk Druid 来​​​​​​​修​​​​​​​改​​​​​​​设​​​​​​​置​​​​​​​。​​​​​​​

注意

请​​​​​​​注​​​​​​​意​​​​​​​,在​​​​​​​文​​​​​​​本​​​​​​​安​​​​​​​装​​​​​​​模​​​​​​​式​​​​​​​下​​​​​​​,你​​​​​​​不​​​​​​​可​​​​​​​能​​​​​​​用​​​​​​​ LVM(逻​​​​​​​辑​​​​​​​卷​​​​​​​管​​​​​​​理​​​​​​​器​​​​​​​)来​​​​​​​查​​​​​​​看​​​​​​​现​​​​​​​有​​​​​​​的​​​​​​​设​​​​​​​置​​​​​​​。​​​​​​​LVM 只​​​​​​​能​​​​​​​在​​​​​​​图​​​​​​​形​​​​​​​安​​​​​​​装​​​​​​​模​​​​​​​式​​​​​​​下​​​​​​​用​​​​​​​图​​​​​​​形​​​​​​​化​​​​​​​的​​​​​​​ Disk Druid 程​​​​​​​序​​​​​​​来​​​​​​​设​​​​​​​置​​​​​​​。​​​​​​​
If you chose to create a custom layout, you must tell the installation program where to install Red Hat Enterprise Linux. This is done by defining mount points for one or more disk partitions in which Red Hat Enterprise Linux is installed.

注意

If you have not yet planned how to set up your partitions, refer to 第 25 章 磁​​​​​​​盘​​​​​​​分​​​​​​​区​​​​​​​简​​​​​​​介​​​​​​​ and 第 12.19.4 节 “推​​​​​​​荐​​​​​​​的​​​​​​​分​​​​​​​区​​​​​​​方​​​​​​​案​​​​​​​”. At a bare minimum, you need an appropriately-sized root (/) partition, a /boot/ partition, PPC PReP boot partition, and a swap partition equal to twice the amount of RAM you have on the system.
在​​​​​​​ IBM System p 和​​​​​​​ System i 系​​​​​​​统​​​​​​​上​​​​​​​用​​​​​​​ Disk Druid 来​​​​​​​分​​​​​​​区​​​​​​​

图 12.16. 在​​​​​​​ IBM System p 和​​​​​​​ System i 系​​​​​​​统​​​​​​​上​​​​​​​用​​​​​​​ Disk Druid 来​​​​​​​分​​​​​​​区​​​​​​​

安​​​​​​​装​​​​​​​程​​​​​​​序​​​​​​​使​​​​​​​用​​​​​​​的​​​​​​​分​​​​​​​区​​​​​​​工​​​​​​​具​​​​​​​是​​​​​​​ Disk Druid。​​​​​​​除​​​​​​​了​​​​​​​某​​​​​​​些​​​​​​​较​​​​​​​隐​​​​​​​晦​​​​​​​的​​​​​​​情​​​​​​​况​​​​​​​外​​​​​​​,Disk Druid 能​​​​​​​够​​​​​​​为​​​​​​​典​​​​​​​型​​​​​​​的​​​​​​​安​​​​​​​装​​​​​​​处​​​​​​​理​​​​​​​其​​​​​​​分​​​​​​​区​​​​​​​要​​​​​​​求​​​​​​​。​​​​​​​

12.19.1. 硬​​​​​​​盘​​​​​​​的​​​​​​​图​​​​​​​形​​​​​​​化​​​​​​​表​​​​​​​示​​​​​​​

Disk Druid 提​​​​​​​供​​​​​​​了​​​​​​​对​​​​​​​你​​​​​​​的​​​​​​​硬​​​​​​​盘​​​​​​​的​​​​​​​图​​​​​​​形​​​​​​​化​​​​​​​表​​​​​​​示​​​​​​​。​​​​​​​
单​​​​​​​击​​​​​​​鼠​​​​​​​标​​​​​​​来​​​​​​​突​​​​​​​出​​​​​​​显​​​​​​​示​​​​​​​图​​​​​​​形​​​​​​​化​​​​​​​表​​​​​​​示​​​​​​​中​​​​​​​的​​​​​​​某​​​​​​​一​​​​​​​字​​​​​​​段​​​​​​​。​​​​​​​双​​​​​​​击​​​​​​​来​​​​​​​编​​​​​​​辑​​​​​​​某​​​​​​​个​​​​​​​现​​​​​​​存​​​​​​​的​​​​​​​分​​​​​​​区​​​​​​​或​​​​​​​从​​​​​​​现​​​​​​​存​​​​​​​空​​​​​​​闲​​​​​​​空​​​​​​​间​​​​​​​中​​​​​​​创​​​​​​​建​​​​​​​分​​​​​​​区​​​​​​​。​​​​​​​
Above the display, you can review the Drive name (such as /dev/hda), the Geom (which shows the hard disk's geometry and consists of three numbers representing the number of cylinders, heads, and sectors as reported by the hard disk), and the Model of the hard drive as detected by the installation program.

为了尽快向用户提供最新的信息,本文档可能会包括由机器自动从英文原文翻译的内容。如需更多信息,请参阅此说明。