Red Hat Training

A Red Hat training course is available for Red Hat Enterprise Linux

4.5. Instalando a partir do DVD/CD-ROM

To install Red Hat Enterprise Linux from a DVD/CD-ROM, place the DVD or CD #1 in your DVD/CD-ROM drive and boot your system from the DVD/CD-ROM.
The installation program then probes your system and attempts to identify your CD-ROM drive. It starts by looking for an IDE (also known as an ATAPI) CD-ROM drive.


To abort the installation process at this time, reboot your machine and then eject the boot media. You can safely cancel the installation at any point before the About to Install screen. Refer to Seção 4.24, “Preparando para Instalar” for more information.
If your CD-ROM drive is not detected, and it is a SCSI CD-ROM, the installation program prompts you to choose a SCSI driver. Choose the driver that most closely resembles your adapter. You may specify options for the driver if necessary; however, most drivers detect your SCSI adapter automatically.
If the DVD/CD-ROM drive is found and the driver loaded, the installer will present you with the option to perform a media check on the DVD/CD-ROM. This will take some time, and you may opt to skip over this step. However, if you later encounter problems with the installer, you should reboot and perform the media check before calling for support. From the media check dialog, continue to the next stage of the installation process (refer to Seção 4.11, “Bem-vindo ao Red Hat Enterprise Linux”).

4.5.1. E se o CD-ROM IDE não Foi Encontrado?

Se você tiver um DVD/CD-ROM IDE (ATAPI) mas o programa de instalação não consegue achá-lo e pergunta a você que tipo de drive de DVD/CD-ROM você possui, tente o seguinte comando de inicialização. Reinicie a instalação, e no prompt boot: digite linux hdX=cdrom. Substitua X por uma das seguintes letras, dependendo da interface à qual o drive está conectado, e se está configurado como mestre (primário) ou escravo (secundário):
  • a — primeiro controlador do IDE, mestre
  • b — primeiro controlador do IDE, escravo
  • c — segundo controlador do IDE, mestre
  • d — segundo controlador do IDE, escravo
Se você tiver um terceiro e/ou quarto controlador, continue atribuindo letras em ordem alfabética, indo de controlador a controlador, e de mestre a escravo.