RHEL 9 도입 고려 사항
RHEL 8과 RHEL 9의 주요 차이점
초록
보다 포괄적 수용을 위한 오픈 소스 용어 교체
Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 용어를 교체하기 위해 최선을 다하고 있습니다. 먼저 마스터(master), 슬레이브(slave), 블랙리스트(blacklist), 화이트리스트(whitelist) 등 네 가지 용어를 교체하고 있습니다. 이러한 변경 작업은 작업 범위가 크므로 향후 여러 릴리스에 걸쳐 점차 구현할 예정입니다. 자세한 내용은 CTO Chris Wright의 메시지를 참조하십시오.
Red Hat 문서에 관한 피드백 제공
문서 개선을 위한 의견에 감사드립니다. 어떻게 개선할 수 있는지 알려주십시오.
Jira를 통해 피드백 제출 (등록 필요)
- Jira 웹 사이트에 로그인합니다.
- 상단 탐색 모음에서 생성 을 클릭합니다.
- 요약 필드에 설명 제목을 입력합니다.
- 설명 필드에 개선을 위한 제안을 입력합니다. 문서의 관련 부분에 대한 링크를 포함합니다.
- 대화 상자 하단에서 생성 을 클릭합니다.
1장. 접두부
이 문서에서는 Red Hat Enterprise Linux의 두 주요 버전 간의 차이점에 대해 설명합니다. RHEL 8 및 RHEL 9. 모든 변경 사항에 대한 전체 목록이 아니라 RHEL 9로의 업그레이드와 관련된 변경 사항 목록을 제공합니다.
RHEL 9 사용법에 대한 자세한 내용은 RHEL 9 제품 설명서를 참조하십시오.
RHEL 8에서 RHEL 9로의 인플레이스 업그레이드에 대한 자세한 내용은 RHEL 8에서 RHEL 9으로 업그레이드를 참조하십시오.
RHEL 7과 RHEL 8의 주요 차이점에 대한 자세한 내용은 RHEL 8 채택 시 고려 사항을 참조하십시오.
Red Hat Enterprise Linux 9의 기능 및 제한사항과 다른 시스템 버전과 비교하면 지식베이스 문서 Red Hat Enterprise Linux 기술 기능 및 제한사항 에서 확인할 수 있습니다.
Red Hat Enterprise Linux 라이프사이클에 관한 정보는 Red Hat Enterprise Linux 라이프사이클에서 참조하십시오.
패키지 매니페스트 문서에서는 라이센스 및 애플리케이션 호환성 수준을 포함하여 RHEL 9에 대한 패키지 목록을 제공합니다.
애플리케이션 호환성 수준은 Red Hat Enterprise Linux 9에서 설명합니다. 애플리케이션 호환성 가이드 문서.
2장. 아키텍처
Red Hat Enterprise Linux 9는 필요한 최소 버전에서 다음 아키텍처에 대한 지원을 제공하는 커널 버전 5.14와 함께 배포됩니다.
- AMD 및 Intel 64비트 아키텍처(x86-64-v2)
- 64비트 ARM 아키텍처(ARMv8.0-A)
- IBM Power Systems, Little Endian (POWER9)
- 64-bit IBM Z (z14)
각 아키텍처에 적절한 서브스크립션을 구매해야 합니다.
3장. 리포지토리
Red Hat Enterprise Linux 9는 다음 두 가지 주요 리포지토리를 통해 배포됩니다.
- BaseOS
- AppStream
두 리포지토리 모두 기본 RHEL 설치에 필요하며 모든 RHEL 서브스크립션을 통해 사용할 수 있습니다.
BaseOS 리포지토리의 콘텐츠는 모든 설치의 기반이 되는 기본 OS 기능의 코어 세트를 제공하는 데 사용됩니다. 이 콘텐츠는 RPM 형식으로 사용 가능하며 이전 RHEL 릴리스와 비슷한 지원 조건이 적용됩니다. 자세한 내용은 지원 범위 세부 정보 문서를 참조하십시오.
AppStream 리포지토리의 콘텐츠에는 다양한 워크로드 및 사용 사례를 지원하는 추가 사용자 공간 애플리케이션, 런타임 언어 및 데이터베이스가 포함됩니다.
또한 CodeReady Linux Builder 리포지토리는 모든 RHEL 서브스크립션을 통해 사용할 수 있습니다. 이는 개발자가 사용할 수 있는 추가 패키지를 제공합니다. CodeReady Linux Builder 리포지토리에 포함된 패키지는 지원되지 않습니다.
추가 리소스
4장. Application Streams
여러 사용자 공간 구성 요소의 버전은 Application Streams로 제공되며 핵심 운영 체제 패키지보다 자주 업데이트됩니다. 따라서 플랫폼 또는 특정 배포의 기본 안정성에 영향을 주지 않고 RHEL을 사용자 정의할 수 있는 유연성이 향상됩니다.
각 Application Stream 구성 요소에는 RHEL 9와 동일한 라이프 사이클이 있거나 더 짧습니다. RHEL 라이프 사이클 정보는 Red Hat Enterprise Linux 라이프 사이클 및 Red Hat Enterprise Linux Application Streams 라이프 사이클에서 참조하십시오.
Application Streams는 다음 형식으로 제공됩니다.
- 친숙한 RPM 형식
- RPM 형식 확장 모듈
- 소프트웨어 컬렉션으로
- 예를 들어 Flatpaks입니다.
RHEL 9는 기존 dnf install
명령을 사용하여 RPM 패키지로 설치할 수 있는 초기 Application Stream 버전을 제공하여 Application Streams 환경을 향상시킵니다.
RPM 형식의 특정 초기 Application Streams는 Red Hat Enterprise Linux 9보다 라이프사이클이 짧습니다.
일부 추가 Application Stream 버전은 향후 마이너 RHEL 9 릴리스에서 라이프 사이클이 짧은 모듈로 배포됩니다. 모든 콘텐츠 라이프사이클 고려 사항에 대한 Red Hat Enterprise Linux Application Stream Lifecycle 정의를 검토하는 것이 좋습니다.
설치하려는 Application Stream 버전을 항상 결정하고 먼저 Red Hat Enterprise Linux Application Stream Lifecycle 을 검토하십시오.
대체 컴파일러 및 컨테이너 툴과 같이 빠른 업데이트가 필요한 콘텐츠는 대체 버전을 동시에 제공하지 않는 롤링 스트림에서 사용할 수 있습니다. 롤링 스트림은 RPM 또는 모듈로 패키징할 수 있습니다.
RHEL 9 및 애플리케이션 호환성 수준에서 사용 가능한 Application Streams에 대한 자세한 내용은 패키지 매니페스트 를 참조하십시오. 애플리케이션 호환성 수준은 Red Hat Enterprise Linux 9에서 설명합니다. 애플리케이션 호환성 가이드 문서.
5장. 설치 프로그램 및 이미지 생성
다음 장에서는 RHEL 8과 RHEL 9 간의 설치 프로그램 및 이미지 생성에 대한 주요 변경 사항이 포함되어 있습니다.
5.1. 설치 프로그램
Anaconda는 대화형 설치를 위해 네트워크를 자동으로 활성화합니다.
Anaconda는 이제 사용자가 네트워크 대화 상자에서 수동으로 활성화할 필요 없이 대화식 설치를 수행할 때 자동으로 네트워크를 활성화합니다. 이번 업데이트에서는 ip=
부팅 옵션을 사용하여 Kickstart 설치 및 설치에 대한 설치 환경을 변경하지 않습니다.
루트 계정을
잠그기 위한 새로운 옵션 및 암호로 루트 SSH 로그인 허용
RHEL 9는 루트 암호 설정 화면에 다음과 같은 새로운 옵션을 추가합니다.
-
루트 계정 잠금
: 시스템에 대한 루트 액세스를 잠그려면 다음을 수행합니다. -
암호를 사용하여 root SSH 로그인 허용
: 암호 기반 SSH root 로그인을 활성화하려면 다음을 수행합니다.
Kickstart 설치 중에 rootpw
Kickstart 명령의 --allow-ssh
옵션을 사용하여 암호로 SSH를 통해 root 액세스를 활성화할 수 있습니다. 자세한 내용은 rootpw(필수) 를 참조하십시오.
라이센스, 시스템 및 사용자 설정 화면의 구성 설정이 표준 설치 후 비활성화되었습니다.
이전 버전에서는 RHEL 사용자가 Licensing, System (Subscription manager) 및 gnome-initial-setup
및 로그인
화면 이전에 사용자 설정을 설정했습니다. RHEL 9부터는 사용자 환경을 개선하기 위해 초기 설정 화면이 기본적으로 비활성화되어 있습니다. 사용자 생성 또는 라이센스 디스플레이에 대한 초기 설정을 실행해야 하는 경우 요구 사항에 따라 다음 패키지를 설치합니다.
초기 설정 패키지를 설치하려면 다음을 수행합니다.
# dnf install initial-setup initial-setup-gui
다음 시스템을 재부팅한 후 초기 설정을 활성화하려면 다음을 수행합니다.
# systemctl enable initial-setup
- 시스템을 재부팅하여 초기 설정을 확인합니다.
Kickstart 설치의 경우 initial-setup-gui
를 packages 섹션에 추가하고 initial-setup
서비스를 활성화합니다.
firstboot --enable %packages @^graphical-server-environment initial-setup-gui %end
이제 Satellite용 Kickstart를 통한 시스템 프로비저닝을 위한 rhsm
명령을 사용할 수 있습니다.
rhsm
명령은 RHEL 9의 시스템 프로비저닝에 대한 %post
스크립트를 대체합니다. rhsm
명령은 시스템 등록, RHEL 서브스크립션 연결, Satellite 인스턴스에서 설치 등의 모든 프로비저닝 작업에 도움이 됩니다. 자세한 내용은 고급 RHEL 설치 수행 가이드의 Kickstart를 사용하여 Satellite에서 RHEL 등록 및 설치를 참조하십시오.
새로운 Kickstart 명령 - 시간 소스
새로운 timesource
Kickstart 명령은 선택 사항이며 시간 데이터를 제공하는 NTP, NTS 서버 및 NTP 풀을 설정하는 데 도움이 됩니다. 또한 시스템의 NTP 서비스 활성화 또는 비활성화를 제어하는 데 도움이 됩니다. timezone 명령의 --ntpservers
옵션은 더 이상 사용되지 않으며 이 새 명령으로 교체되었습니다.
inst. 접두사 없이 Anaconda 부팅 인수에 대한 지원을 더 이상 사용할 수 없습니다.
inst.
접두사가 없는 Anaconda 부팅 인수는 RHEL 7 이후 더 이상 사용되지 않습니다. RHEL 9에서는 이러한 부팅 인수에 대한 지원이 제거되었습니다. 이러한 옵션을 계속 사용하려면 inst.
접두사를 사용합니다.
예를 들어 그래픽
모드 대신 설치 프로그램이 텍스트
모드에서 실행되도록 하려면 다음 옵션을 사용합니다.
inst.text
제거된 Kickstart 명령 및 옵션
다음 Kickstart 명령 및 옵션이 RHEL 9에서 제거되었습니다. Kickstart 파일에서 해당 파일을 사용하면 오류가 발생합니다.
-
device
-
deviceprobe
-
dmraid
-
install
- 하위 명령 또는 방법으로 명령으로 직접 사용 -
다중 경로
-
bootloader
--upgrade
-
ignoredisk
--interactive
-
partition
--active
-
harddrive
--biospart
-
자동 단계
특정 옵션과 값만 나열된 경우 기본 명령 및 기타 옵션을 계속 사용할 수 있으며 제거되지 않습니다.
제거된 부팅 옵션
다음 부팅 옵션이 Red Hat Enterprise Linux에서 제거되었습니다.
inst.zram
RHEL 9는
zram
서비스를 지원하지 않습니다. 자세한 내용은zram-generator(8)
매뉴얼 페이지를 참조하십시오.inst.singlelang
RHEL 9에서는 단일 언어 모드가 지원되지 않습니다.
inst.loglevel
로그 수준은 항상 debug로 설정됩니다.
5.2. 이미지 생성
이 버전에서는 이전 버전에 비해 다음과 같은 향상된 기능이 도입되었습니다.
AWS EC2 이미지에서는 BIOS 및 UEFI 부팅을 모두 지원
이번 업데이트에서는 기존 BIOS 부팅 외에도 UEFI 부팅을 지원하도록 RHEL 이미지 빌더에서 생성한 AWS EC2 AMD 또는 Intel 64비트 아키텍처 .ami
이미지를 확장합니다.
VMware VSphere(OVA) 빌드 지원
RHEL 이미지 빌더는 vSphere GUI 클라이언트를 사용하여 VMware vSphere에 더 쉽게 배포할 수 있는 VMware VSphere Open Virtual 어플라이언스(OVA) 파일을 빌드할 수 있습니다.
RHEL 이미지 빌더 웹 콘솔에서 블루프린트 및 이미지를 생성하는 새롭고 개선된 방법
이미지 빌더 툴의 새로운 통합 버전을 사용하면 훨씬 더 쉽게 마인드와 이미지를 생성할 수 있습니다. 주요 개선 사항은 다음과 같습니다.
- 이미지 빌더 웹 콘솔에서 커널, 파일 시스템, 방화벽, 로케일 및 기타 사용자 정의와 같이 이전에 지원되는 모든 사용자 정의를 명령줄 인터페이스에서만 사용할 수 있습니다.
-
.JSON
또는.TOML
형식으로 청사진을 가져오고, 내보내고, 저장할 수 있습니다.
RHEL 이미지 빌더에서는 /etc
디렉터리에 사용자 지정 파일 및 디렉터리 생성 지원
새로운'[[customizations.files]]' 및 [customizations.directories]] 및 [customizations.directories]]
를 사용하여 /etc
이미지 디렉터리에 사용자 지정 파일 및 디렉터리를 생성할 수 있습니다. 현재 이러한 사용자 지정은 /etc
디렉터리에서만 사용할 수 있습니다. 다음과 같이 OSTree 커밋을 배포하는 이미지 유형을 제외하고 사용 가능한 모든 이미지 유형에 대한 사용자 정의를 사용할 수 있습니다.
-
edge-raw-image
-
edge-installer
-
edge-simplified-installer
.V
HD 이미지는 RHEL 이미지 빌더로 빌드된 64비트 ARM 지원
이미지 빌더를 사용하여 .vhd
이미지를 빌드하고 Microsoft Azure 클라우드에 업로드할 수 있습니다.
RHEL 이미지 빌더에서 LVM에서 사용자 지정 파일 시스템 파티션 지원
LVM에서 사용자 지정 파일 시스템 파티션을 지원하는 경우 파일 시스템 사용자 지정을 시스템에 추가하면 파일 시스템이 LVM 파티션으로 변환됩니다.
RHEL 이미지 빌더에서 파일 시스템 구성 지원
Red Hat Enterprise Linux 9.0부터 Image Builder는 기본 레이아웃 구성을 사용하는 대신 특정 디스크 레이아웃으로 이미지를 생성하기 위해 사용자 지정 파일 시스템 구성을 사용자에 게 지정할 수 있도록 지원합니다.
RHEL 이미지 빌더에서 부팅 가능한 ISO 설치 프로그램 이미지를 생성할 수 있습니다.
이미지 uilder GUI 및 CLI를 사용하여 부팅 가능한 ISO 설치 프로그램 이미지를 생성할 수 있습니다. 이러한 이미지는 베어 메탈 서버에 직접 설치하는 데 사용할 수 있는 루트 파일 시스템이 포함된 tar 파일로 구성됩니다.
6장. 서브스크립션 관리
다음 장에서는 RHEL 8과 RHEL 9 간의 서브스크립션 관리에 대한 주요 변경 사항을 설명합니다.
6.1. 서브스크립션 관리에 대한 주요 변경 사항
subscription-manager syspurpose
명령에서 시스템 용도 명령 병합
이전에는 시스템 용도 특성을 설정하는 두 가지 명령( syspurpose
및 subscription-manager
)이 있었습니다. 하나의 모듈에서 모든 시스템 용도 속성을 통합하기 위해 subscription-manager
, 서비스 수준 , 의 모든 애드온
,role
, 서비스 수준사용
명령이 새 하위 모듈인 subscription-manager syspurpose
로 이동되었습니다.
새 하위 모듈 외부의 기존 subscription-manager
명령은 더 이상 사용되지 않습니다. RHEL 9에서 syspurpose
명령줄 툴을 제공하는 별도의 패키지(python3-syspurpose
)가 제거되었습니다.
이번 업데이트에서는 subscription-manager의 단일 명령을 사용하여 모든 시스템 용도 속성을 확인, 설정 및 업데이트할 수 있는 일관된 방법을 제공합니다. 이 명령은 기존 시스템 용도 명령을 새 하위 명령으로 사용할 수 있는 동등한 버전으로 교체합니다. 예를 들어 subscription-manager 역할 --set SystemRole
은 subscription-manager syspurpose 역할 --set SystemRole
이 됩니다.
새 명령, 옵션 및 기타 속성에 대한 전체 정보는 subscription-manager
man 페이지의 SYSPURPOSE OPTIONS
섹션 또는 서브스크립션 관리자 명령줄 툴을 사용하여 시스템 용도 구성 을 참조하십시오.
virt-who
는 /etc/sysconfig/virt-who
대신 /etc/virt-who.conf
를 전역 옵션에 사용합니다.
RHEL 9에서는 시스템의 virt-who
유틸리티의 글로벌 옵션이 /etc/virt-who.conf
파일에 저장됩니다. 따라서 /etc/sysconfig/virt-who
파일은 더 이상 사용되지 않으며 삭제되었습니다.
7장. 소프트웨어 관리
다음 장에서는 RHEL 8과 RHEL 9 간의 소프트웨어 관리에 대한 주요 변경 사항을 설명합니다.
7.1. 소프트웨어 관리의 주요 변경 사항
DNF/YUM을 사용한 패키지 관리
Red Hat Enterprise Linux 9에서는 DNF에서 소프트웨어 설치를 보장합니다. Red Hat은 이전 주요 RHEL 버전과의 일관성을 위해 yum
용어를 계속 지원합니다. yum
대신 dnf
를 입력하는 경우 둘 다 호환성을 위한 별칭이므로 명령이 예상대로 작동합니다.
RHEL 8 및 RHEL 9는 DNF 를 기반으로 하지만 RHEL 7에서 사용되는 YUM 과 호환됩니다.
자세한 내용은 DNF 툴을 사용하여 소프트웨어 관리를 참조하십시오.
주요 RPM 기능 및 변경 사항
Red Hat Enterprise Linux 9는 RPM 버전 4.16과 함께 배포됩니다. 이 버전에서는 이전 버전에 비해 많은 개선 사항이 도입되었습니다.
주요 기능은 다음과 같습니다.
특히 새로운 SPEC 기능:
빠른 매크로 기반 종속성 생성기
이제 종속성 생성기를 일반 RPM 매크로로 정의할 수 있습니다. 이는 임베디드 Lua 인터프리터와 함께 특히 유용합니다 (
%{lua:…}
) 정교하면서도 빠른 생성기를 작성하고 쉘 스크립트 중복을 방지하고 쉘 스크립트를 실행할 수 있기 때문입니다.예제:
%__foo_provides() %{basename:%{1}}
동적 빌드 종속성 생성을 활성화하는
%generate_buildrequires
섹션이제 새로 사용 가능한
%generate_buildrequires
섹션을 사용하여 RPM 빌드 시 추가 빌드 종속성을 프로그래밍 방식으로 생성할 수 있습니다. 이 기능은 전문 유틸리티가 MOM, Golang, Node.js, Ruby, Python 또는 Haskell과 같은 런타임 또는 빌드 시간 종속성을 결정하는 데 일반적으로 사용되는 언어로 작성된 소프트웨어를 패키징할 때 유용합니다.메타(주문되지 않음) 종속성
meta
라는 새로운 종속성 한정자를 사용하면 특히 설치 시간 또는 런타임 종속성이 아닌 종속성을 표시할 수 있습니다. 이는 메타 패키지의 종속성을 지정할 때와 같이 일반적인 종속성 순서에서 발생할 수 있는 불필요한 종속성 루프를 방지하는 데 유용합니다.예제:
Requires(meta): <pkgname>
표현식의 기본 버전 비교
이제 새로 지원되는
v"…를 사용하여 표현식에서 임의의 버전 문자열을 비교할 수 있습니다."
형식.예제:
%if v"%{python_version}" < v"3.9"
caret 버전 연산자, 틸드와 반대
새 캐럿(
^
) 연산자를 사용하여 기본 버전보다 높은 버전을 표시할 수 있습니다. 이 연산자는 반대의 의미가 있는 기존 틸드
(~) 연산자를 보완합니다.-
%elif
,%elifos
및%elifarch
문 선택 사항인 자동 패치 및 소스 번호 지정
patch:
및Source:
번호가 없는 태그는 나열된 순서에 따라 자동으로 번호가 지정됩니다.%autopatch
에서 패치 범위를 허용%autopatch
매크로는 적용할 최소 및 최대 패치 번호를 제한하기 위해-m
및 -M%patchlist
및%sourcelist
섹션이제 새로 추가된
%patchlist 및
섹션을 사용하여 각 항목 앞에 해당%sourcelist
패치
: 및소스:
태그를 사용하지 않고 패치 및 소스 파일을 나열할 수 있습니다.빌드 조건을 선언할 수 있는 보다 직관적인 방법
RHEL 9.2부터 새로운
%bcond
매크로를 사용하여 조건을 빌드할 수 있습니다.%bcond
매크로는 빌드 조건 이름과 기본값을 인수로 사용합니다. 매크로없이 이전
에 비해%bcond_with
및 %bcond_%bcond
는 이해하기 쉽고 빌드 시 기본값을 계산할 수 있습니다. 기본값은 모든 숫자 식일 수 있습니다.예제:
gnutls
빌드 조건을 생성하려면 기본적으로 활성화됩니다.%bcond gnutls 1
부트스트랩
빌드 조건을 생성하려면 기본적으로 비활성화되어 있습니다.%bcond bootstrap 0
gnutls
와 반대의 기본값인openssl
빌드 조건을 생성하려면 다음을 수행합니다.%bcond openssl %{without gnutls}
-
RPM 데이터베이스는 이제
sqlite
라이브러리를 기반으로 합니다.BerkeleyDB
데이터베이스에 대한 읽기 전용 지원은 마이그레이션 및 쿼리 목적으로 유지됩니다. -
이전에 RPM 자체에 빌드된 트랜잭션에서 감사 로그 이벤트를 발행하기 위한 새로운
rpm-plugin-audit
플러그인 패키지 빌드에서 병렬 처리 증가
패키지 빌드 프로세스의 병렬화 방법은 여러 가지 개선되었습니다. 이러한 개선 사항에는 다양한 빌드 루트 정책 스크립트와 온전성 검사, 파일 분류 및 하위 패키지 생성 및 순서가 포함됩니다. 따라서 특히 대규모 패키지를 위해 멀티프로세서 시스템에서 패키지를 구축하는 것이 더 빠르고 효율적이어야 합니다.
- 빌드 시 헤더 데이터의 UTF-8 검증
RPM에서 Zstandard (
zstd
) 압축 알고리즘을 지원RHEL 9에서는 기본 RPM 압축 알고리즘이 Zstandard(
zstd
)로 전환되었습니다. 결과적으로 패키지가 더 빠르게 설치되므로 대규모 트랜잭션 중에 특히 눈에 띄게됩니다.
8장. 쉘 및 명령행 툴
다음 장에서는 RHEL 8과 RHEL 9 사이의 쉘 및 명령줄 툴에 대한 주요 변경 사항이 포함되어 있습니다.
8.1. 시스템 관리에 대한 주요 변경 사항
Red Hat Enterprise Linux 9의 net-snmp 통신에는 데이터 암호화 표준(DES) 알고리즘을 사용할 수 없습니다.
이전 버전의 RHEL에서 DES는 net-snmp 클라이언트와 서버 간의 보안 통신을 위한 암호화 알고리즘으로 사용되었습니다. RHEL 9에서는 OpenSSL 라이브러리에서 DES 알고리즘을 지원하지 않습니다. 알고리즘은 안전하지 않은 것으로 표시되고 net-snmp에 대한 DES 지원이 제거되었습니다.
ABRT 툴이 제거됨
RHEL 9에서는 애플리케이션 충돌을 탐지하고 보고하기 위한 자동 버그 보고 툴(ABRT)을 사용할 수 없습니다.
대신 systemd-coredump
툴을 사용하여 프로그램이 충돌한 후 자동으로 생성되는 코어 덤프를 기록하고 저장합니다.
RHEL 9 systemd
에서는 hidepid=n
마운트 옵션이 지원되지 않습니다.
mount 옵션은 /proc/[
디렉토리의 정보에 액세스할 수 있는 사람을 제어하는 파이스 옵션은 RHEL 9에서 제공되는 pid
]systemd
인프라와 호환되지 않습니다.
또한 이 옵션을 사용하면 systemd
에서 시작된 특정 서비스가 SELinux AVC 거부 메시지를 생성하고 다른 작업이 완료되지 못하도록 할 수 있습니다.
dump
패키지의 dump
유틸리티가 제거됨
파일 시스템 백업에 사용된 덤프
유틸리티는 Red Hat Enterprise Linux 8에서 더 이상 사용되지 않으며 RHEL 9에서는 사용할 수 없습니다.
RHEL 9에서는 tar
또는 dd
를 ext2, ext3 및 ext4 파일 시스템의 백업 도구로 사용할 것을 권장합니다. 덤프
유틸리티는 EPEL 9 리포지토리의 일부가 됩니다.
덤프
패키지의 복원
유틸리티는 RHEL 9에서 사용 가능하고 지원되는 상태로 유지되며 복원
패키지로 사용할 수 있습니다.
RHEL 9에는 ReaR crontab이 포함되어 있지 않습니다.
rear 패키지의 /etc/cron.d/
crontab은 디스크 레이아웃이 변경된 후 후 rear
rear mkrescue
를 실행하는 RHEL 9에서 제거되었습니다.
rear mkrescue
를 실행하기 위해 /etc/cron.d/rear
crontab에 의존하는 경우, 대신 ReaR 실행을 수동으로 구성할 수 있습니다.
RHEL의 rear
패키지에는 다음 작업 예약 예제가 포함되어 있습니다.
-
/usr/share/doc/rear/rear.cron
예제 crontab -
/usr/share/doc/rear.{service,timer}
예제 systemd 단위
시스템 복구를 위해 업데이트된 백업을 수행하기 위해 사이트별 수정 또는 기타 작업 없이 이러한 예제를 사용하지 마십시오. 복구 이미지를 다시 생성하는 것 외에도 정기적인 백업을 수행해야 합니다. 백업을 수행하는 단계는 로컬 구성에 따라 다릅니다. 업데이트된 백업을 동시에 사용하지 않고 rear mkrescue
명령을 실행하는 경우 시스템 복구 프로세스에서 저장된 레이아웃과 일치하지 않는 이전 백업을 사용합니다.
8.2. 명령줄 툴에 대한 주요 변경 사항
raw
명령행 툴에 대한 지원이 제거되었습니다.
이번 릴리스에서는 Linux 커널이 버전 5.14 이후 원시 장치를 지원하지 않기 때문에
(raw
/usr/bin/raw
) 명령줄 도구가 util-linux
패키지에서 제거되었습니다.
현재는 사용 가능한 대체 항목이 없습니다.
9장. 인프라 서비스
다음 장에서는 RHEL 8과 RHEL 9 간의 인프라 서비스에 대한 주요 변경 사항을 설명합니다.
9.1. 인프라 서비스에 대한 주요 변경 사항
Berkeley DB
동적 백엔드에 대한 지원이 제거되었습니다.
이번 릴리스에서는libdb
( Berkeley DB
) 동적 백엔드가 더 이상 지원되지 않습니다. named-sdb
빌드는 더 이상 제공되지 않습니다. 각 백엔드(예: sqlite3
또는 mysql
)에 DLZ 로드 가능 플러그인을
사용할 수 있습니다. 이러한 플러그인은 빌드되거나 제공되지 않으므로 소스에서 빌드해야 합니다.
Apache HTTP Server에서 사용하기 위해 PHP와 함께 제공되는 mod_php
모듈이 제거되었습니다.
Apache HTTP Server와 함께 사용하기 위해 PHP와 함께 제공되는 mod_php
모듈은 RHEL 9에서 더 이상 사용할 수 없습니다.
RHEL 8부터 PHP 스크립트는 기본적으로 FastCGI Process Manager(php-fpm
)를 사용하여 실행됩니다. 자세한 내용은 Apache HTTP Server에서 PHP 사용을 참조하십시오.
10장. 보안
다음 장에서는 RHEL 8과 RHEL 9 간의 보안에 대한 주요 변경 사항이 포함되어 있습니다.
10.1. 보안 규정 준수
DRAFT로 제공되는 CIS 및 DISAonnectionFactory 프로파일
CIS(Center for Internet Security) 및 Defence Industry Security Association Security Implementation Guides (DISAbaremetal)의 벤치마크를 기반으로 하는 프로필은 아직 RHEL 9에 대한 공식 벤치마크를 게시하지 않았기 때문에 DRAFT로 제공됩니다. 또한 OSSP 프로파일은 구현되기 때문에 DRAFT에 있습니다.
RHEL 9에서 사용 가능한 전체 프로필 목록은 RHEL 9 에서 지원되는 SCAP 보안 가이드 프로필을 참조하십시오.
OpenSCAP이 더 이상 SHA-1 및 MD5를 지원하지 않음
Red Hat Enterprise Linux 9에서 SHA-1 및 MD5 해시 함수가 제거되었기 때문에 OVAL filehash_test
에 대한 지원이 OpenSCAP에서 제거되었습니다. 또한 SHA-1 및 MD5 해시 함수에 대한 지원이 OpenSCAP의 OVAL filehash58_test
구현에서 제거되었습니다. 결과적으로 OpenSCAP는 OVAL filehash_test
를 검사하지 않은
상태로 사용하는 SCAP 콘텐츠에서 규칙을 평가합니다. 또한 OpenSCAP은 filehash58_object
가 SHA-1
또는 MD5
로 설정된 hash_type
요소를 사용하여 OVAL filehash58_test
를 평가할 때도 검사되지 않았습니다
.
OVAL 콘텐츠를 업데이트하려면 파일hash_test 대신 filehash58_test
를 사용하고
요소에서filehash58_object
내의 hash_
type
,SHA
-256SHA-384
,SHA-512
중 하나를 사용하도록 영향을 받는 SCAP 콘텐츠를 다시 작성합니다.
OpenSCAP은 XCCDF 파일 대신 데이터 스트림 파일을 사용합니다.
SCAP 소스 데이터 스트림 파일(ssg-rhel9-ds.xml
)에는 이전 버전의 RHEL에 있는 모든 데이터가 XCCDF 파일(sg-rhel9-xccdf.xml)에 포함되어 있습니다.
SCAP 소스 데이터 스트림은 규정 준수 검사를 수행하는 데 필요한 모든 구성 요소(XCCDF, OVAL, cp)를 포함하는 컨테이너 파일입니다. RHEL 7부터 XCCDF 대신 SCAP 소스 데이터 스트림을 사용하는 것이 좋습니다. 이전 버전의 RHEL에서는 XCCDF 파일과 SCAP 소스 데이터 스트림의 데이터가 복제되었습니다. RHEL 9에서는 RPM 패키지 크기를 줄이기 위해 이러한 중복이 제거됩니다. 데이터 스트림 대신 별도의 파일을 사용해야 하는 경우 이 명령을 사용하여 데이터 스트림 파일을 분할할 수 있습니다. # oscap ds sds-split /usr/share/xml/scap/ssg/content/ssg-rhel9-ds.xml output_directory
.
10.2. 암호화 정책, RHEL 핵심 암호화 구성 요소 및 프로토콜
SHA-1 사용 중단
RHEL 9에서는 암호화에 대한 SHA-1 사용은 DEFAULT 시스템 전체 암호화 정책에서 제한됩니다. HMAC를 제외하고 SHA-1은 TLS, DTLS, SSH, IKEv2, DNSSEC 및 Kerberos 프로토콜에서 더 이상 허용되지 않습니다. RHEL 시스템 전체 암호화 정책에 의해 제어되지 않는 개별 애플리케이션도 RHEL 9에서 SHA-1 해시를 사용하지 않습니다.
시나리오에 SHA-1을 사용하여 기존 또는 타사 암호화 서명을 확인해야 하는 경우 다음 명령을 입력하여 활성화할 수 있습니다.
# update-crypto-policies --set DEFAULT:SHA1
또는 시스템 전체 암호화 정책을 LEGACY 정책으로 전환할 수
있습니다. LEGACY
는 또한 안전하지 않은 다른 많은 알고리즘을 사용할 수 있습니다. 자세한 내용은 RHEL 9 보안 강화 문서의 Re-enabling SHA-1 섹션을 참조하십시오.
여전히 SHA-1이 필요한 시스템과의 호환성 문제 해결 방법은 다음 KCS 문서를 참조하십시오.
모든 정책 수준에서 사용되지 않는 알고리즘
다음은 RHEL 9와 함께 제공되는 LEGACY
,DEFAULT 및 FUTURE
암호화 정책에서
비활성화되는 알고리즘은 다음과 같습니다.
- 버전 1.2보다 오래된 TLS (RHEL 9 이후의 RHEL 9는 RHEL 8의 1.0)
- 버전 1.2보다 오래된 DTLS (RHEL 9 이후의 RHEL 9는 RHEL 8에서 < 1.0임)
- 매개 변수를 사용하는 DH < 2048 비트 (RHEL 9 이후 < 1024 비트)
- 키 크기가 있는 RSA < 2048비트 이후 RHEL 9는 RHEL 8에서 1024비트임)
- DSA(RHEL 9 이후의 경우 RHEL 8에서는 1024비트)
- 3DES (RHEL 9 이후)
- RC4 (RHEL 9 이후)
- FFDHE-1024 (RHEL 9 이후)
- DHE-DSS (RHEL 9 이후)
- Camellia(RHEL 9 이후)
- ARIA
- SEED
- IDEA
- 무결성 전용 암호화 제품군
- SHA-384 HMAC를 사용하는 TLS CBC 모드 암호화 제품군
- AES-CCM8
- 모든 ECC 곡선은 europ256k1을 포함한 TLS 1.3과 호환되지 않습니다.
- IKEv1 (RHEL 8 이후)
- BIND 구성의 NSEC3DSA (RHEL 9.2 이후)
시나리오에 비활성화된 정책이 필요한 경우 사용자 지정 암호화 정책을 적용하거나 개별 애플리케이션을 명시적으로 구성하여 활성화할 수 있지만 결과 구성은 지원되지 않습니다.
TLS 변경 사항
RHEL 9에서 TLS 구성은 시스템 전체 암호화 정책 메커니즘을 사용하여 수행됩니다. 1.2 미만의 TLS 버전은 더 이상 지원되지 않습니다. DEFAULT
,FUTURE
및 LEGACY
암호화 정책은 TLS 1.2 및 1.3만 허용합니다. 자세한 내용은 시스템 전체 암호화 정책 사용을 참조하십시오.
RHEL 9에 포함된 라이브러리에서 제공하는 기본 설정은 대부분의 배포에 충분히 안전합니다. TLS 구현에서는 가능한 경우 또는 기존 클라이언트 또는 서버의 연결을 방지할 수 없는 보안 알고리즘을 사용합니다. 보안 알고리즘 또는 프로토콜을 지원하지 않는 레거시 클라이언트나 서버가 연결되지 않거나 연결할 수 없는 엄격한 보안 요구 사항을 충족하는 환경에서 강화된 설정을 적용합니다.
EUS ( Extended Master Secret
TLS Extension)가 FIPS 지원 시스템에서 적용됩니다.
RHSA-2023:3722 권고가 릴리스되면서 TLS 확장 마스터 시크릿
(ECDSA) 확장(RFC 7627)은 FIPS 지원 RHEL 9 시스템에서 TLS 1.2 연결에 필요합니다. 이는 FIPS-140-3 요구 사항에 따라 수행됩니다. TLS 1.3은 영향을 받지 않습니다.
ECDSA 또는 TLS 1.3을 지원하지 않는 레거시 클라이언트는 이제 RHEL 9에서 실행되는 FIPS 서버에 연결할 수 없습니다. 마찬가지로 FIPS 모드의 RHEL 9 클라이언트는 ECDSA 없이 TLS 1.2만 지원하는 서버에 연결할 수 없습니다. 실제로 이러한 클라이언트는 RHEL 6, RHEL 7 및 비 RHEL 레거시 운영 체제의 서버에 연결할 수 없습니다. 이는 OpenSSL의 기존 1.0.x 버전이 ECDSA 또는 TLS 1.3을 지원하지 않기 때문입니다.
RHEL 9에서는 SCP가 지원되지 않음
SCP(Secure Copy Protocol) 프로토콜은 더 이상 지원되지 않으므로 보호하기가 어렵습니다. 이로 인해 이미 보안 문제가 발생했습니다(예: CVE-2020-15778). RHEL 9에서 SCP는 기본적으로 SSH 파일 전송 프로토콜(S SFTP)으로 대체됩니다.
기본적으로 SSH는 RHEL 9 시스템에서 이전 시스템(예: RHEL 6) 또는 이전 시스템에서 RHEL 9로 연결할 수 없습니다. 이전 버전에서 사용된 암호화 알고리즘이 이제 안전하지 않은 것으로 간주되기 때문입니다. 시나리오에 이전 시스템에 연결해야 하는 경우 ECDSA 및 ECDH 알고리즘을 레거시 시스템의 키로 사용하거나 RHEL 9 시스템에서 기존 암호화 정책을 사용할 수 있습니다. 자세한 내용은 RHEL 9에서 RHEL 6 시스템으로의 SSH 솔루션이 작동하지 않고 server-sig-algs 확장을 지원하지 않는 SSH 서버 및 클라이언트와의 연결 실패를 참조하십시오.
OpenSSH root 암호 로그인이 기본적으로 비활성화됨
RHEL 9에서 OpenSSH의 기본 구성은 사용자가 암호를 사용하여 root
로 로그인하지 못하도록 하여 공격자가 암호에 대한 무차별 공격을 통해 액세스할 수 없도록 합니다.
OpenSSH는 SHA-2를 추가로 적용합니다.
암호화 목적으로 덜 안전한 SHA-1 메시지 다이제스트에서 추가로 마이그레이션하려는 노력의 일환으로 OpenSSH에서 다음과 같은 변경이 이루어졌습니다.
-
시스템에 SHA-1을 사용할 수 있는지 여부를
sshd
시작 시 검사를 추가했습니다. 사용할 수 없는 경우 OpenSSH는 작업에 SHA-1을 사용하지 않습니다. 이렇게 하면 DSS 키가 있을 때 로드가 제거되고 사용 가능한 경우 광고rsa-sha2
조합도 적용됩니다. - SSH 개인 키 변환에서 OpenSSH는 RSA 키를 테스트하는 데 명시적으로 SHA-2를 사용합니다.
-
서버 측에서 SHA-1 서명을 사용할 수 없는 경우
sshd
는 SHA-2를 사용하여 호스트 키 증명을 확인합니다. 이는 RHEL 8 및 이전 버전의 클라이언트와 호환되지 않을 수 있습니다. - 클라이언트 측에서 SHA-1 알고리즘을 사용할 수 없는 경우 OpenSSH는 SHA-2를 사용합니다.
- 클라이언트 측에서 OpenSSH는 SHA-1이 키 증명 요청에 사용되거나 해시 알고리즘이 지정되지 않은 경우(기본값) SHA-2 기반 키 증명을 허용합니다. 이는 RSA 인증서에 대한 이미 존재하는 예외와 일치하며 지원되는 경우 최신 알고리즘을 사용하여 연결할 수 있습니다.
GnuTLS에는 FIPS 모드에서 TLS 1.2가 있는 ECDSA가 필요합니다.
FIPS-140-3 표준을 준수하기 위해 GnuTLS 서버 및 클라이언트에는 FIPS 모드에서 협상된 모든 TLS 1.2 연결에 대해 Extended Master Secret(ECDSA) 확장(RFC 7627)이 필요합니다. 시나리오에 ECDSA를 지원하지 않는 이전 서버 및 클라이언트와의 호환성을 유지해야 하며 TLS 1.3을 사용할 수 없는 경우 시스템 전체 암호화 하위 정책을 적용할 수 있습니다.
# update-crypto-policies --set FIPS:NO-ENFORCE-EMS
ECDSA 없이 TLS 1.2 연결을 허용하면 시스템이 더 이상 FIPS-140-3 요구 사항을 충족하지 않습니다.
GnuTLS는 더 이상 TPM 1.2를 지원하지 않습니다.
GnuTLS 라이브러리는 더 이상 신뢰할 수 있는 플랫폼 모듈(TPM) 1.2 기술을 지원하지 않습니다. GnuTLS API를 통해 TPM를 사용하는 애플리케이션은 TPM 2.0을 지원해야 합니다.
GOST에 대한 GnuTLS 지원이 제거되었습니다.
RHEL 8에서는 시스템 전체 암호화 정책을 통해 GOST 암호가 비활성화되었습니다. RHEL 9에서는 이러한 암호에 대한 지원이 GnuTLS 라이브러리에서 제거되었습니다.
Cyrus-sasl
은 Berkeley DB 대신 GDBM을 사용합니다.
이제 Cyrus-sasl
패키지가 libdb
종속성 없이 빌드되고, the sasldb
플러그인은 Berkeley DB 대신 GDBM 데이터베이스 형식을 사용합니다. 이전 Berkeley DB 형식으로 저장된 기존 SASL(Simple Authentication and Security Layer) 데이터베이스를 마이그레이션하려면 다음 구문으로 Cyrus bdb2current
도구를 사용합니다.
$ cyrusbdb2current <sasldb_path> <new_path>
NSS가 FIPS 모드에서 ECDSA 적용
NSS(Network Security Services) 라이브러리에는 FIPS 140-3 표준에서 요구하는 모든 TLS 1.2 연결에 대해 확장 마스터 보안(ECDSA) 확장(RFC 7627)이 필요한 TLS-REQUIRE-
ECDSA 정책이 포함됩니다. 시스템 전체 암호화 정책이 FIPS
로 설정된 경우 NSS는 새 정책을 사용합니다.
시나리오에 ECDSA 또는 TLS 1.3을 지원하지 않고 기존 시스템과 상호 작용해야 하는 경우 NO-ENFORCE-
ECDSA 시스템 전체 암호화 하위 정책을 적용할 수 있습니다. 이러한 변경으로 인해 FIPS-140-3 요구 사항이 위반됩니다.
NSS는 더 이상 DBM 및 pk12util
기본값을 지원하지 않습니다
NNSS(Network Security Services) 라이브러리는 더 이상 신뢰 데이터베이스에 대한 DBM 파일 형식을 지원하지 않습니다. RHEL 8에서는 SQLite 파일 형식이 기본 형식이 되어 기존 DBM 데이터베이스가 읽기 전용 모드에서 열리고 SQLite로 자동 변환되었습니다. RHEL 9로 업그레이드하기 전에 DBM에서 SQLite로 신뢰 데이터베이스를 모두 업데이트합니다.
자세한 내용은 DBM에서 SQLite 프로시저로 NSS 데이터베이스 업데이트를 참조하십시오.
NSS pk12util
은 기본적으로 DES-3 및 SHA-1을 더 이상 사용하지 않음
이제 pk12util
툴에서 개인 키를 내보낼 때 기본적으로 DES-3 및 SHA-1 대신 AES 및 SHA-256 알고리즘을 사용합니다.
RHEL 9의 모든 서명에 대해 시스템 전체 암호화 정책에 의해 SHA-1이 비활성화됩니다.
NSS는 1023비트보다 짧은 RSA 키를 더 이상 지원하지 않습니다.
NSS(Network Security Services) 라이브러리의 업데이트는 모든 RSA 작업의 최소 키 크기를 128에서 1023비트로 변경합니다. 즉, NSS는 더 이상 다음 기능을 수행하지 않습니다.
- RSA 키는 1023bit 미만의 비트를 생성합니다.
- RSA 키가 1023비트보다 짧은 경우 RSA 서명을 서명하거나 확인합니다.
- 1023비트보다 짧은 RSA 키를 사용하여 값을 암호화하거나 해독합니다.
FIPS 모드에서 OpenSSL ENGINE 확장 API가 지원되지 않음
레거시 확장 시스템인 ENGINE API는 새로운 공급자 API와 호환되지 않습니다. 따라서 openssl-pkcs11
및 openssl-ibmca
모듈과 같은 OpenSSL 엔진에서 제공하는 기능에 의존하는 애플리케이션은 FIPS 모드에서 사용할 수 없습니다.
제대로 작동하려면 OpenSSL의 FIPS 모드를 활성화해야 합니다.
FIPS 모드가 활성화된 openssl.cnf
구성 파일에서 기본값이 아닌 값을 사용하는 경우 특히 타사 FIPS 공급자를 사용하는 경우 openssl.cnf
파일에 fips=yes
를 추가합니다.
OpenSSL은 FIPS 모드에서 명시적 곡선 매개변수를 허용하지 않습니다.
일반 곡선 암호화 매개변수, 개인 키, 공개 키 및 명시적 곡선 매개변수가 더 이상 FIPS 모드에서 작동하지 않는 인증서입니다. FIPS 승인 곡선 중 하나를 사용하는 ASN.1 오브젝트 식별자로 곡선 매개변수를 지정하면 FIPS 모드에서 계속 작동합니다.
Libreswan 이제 기본적으로 ESN을 요청합니다.
Libreswan에서 설정 옵션 esn=
의 기본값은 no
에서 중 하나로 변경되었습니다
. 즉, 연결을 시작할 때 Libreswan은 기본적으로 ESN(Extended Serial Number) 사용을 요청합니다. 특히 하드웨어 오프로드를 사용할 때 이 새로운 동작은 특정 네트워크 인터페이스 카드(NIC)가 ESN을 지원하지 않는 경우 IPsec 연결을 설정하는 것을 방지합니다. ESN을 비활성화하려면 esn=
를 no
로 설정하고 replay_window=
옵션을 32 이하의 값으로 설정합니다. 예를 들면 다음과 같습니다.
esn=no replay_window=32
replay_window=
옵션은 다른 메커니즘이 32보다 큰 창 크기로 ESN을 사용하기 때문에 필요합니다.
10.3. SELinux
/etc/selinux/config
를 통한 SELinux 비활성화 지원 삭제
RHEL 9.0 릴리스에서는 /etc/selinux/config
파일의 SELINUX=disabled
옵션을 통해 SELinux 비활성화 지원이 커널에서 제거되었습니다. /etc/selinux/config
를 통해서만 SELinux를 비활성화하면 시스템이 SELinux를 활성화하지만 정책이 로드되지 않고 SELinux 보안 후크가 커널에 등록되어 있습니다. 즉, /etc/selinux/config
를 사용하여 SELinux를 비활성화하면 여전히 일부 시스템 리소스가 필요하며 대신 모든 성능에 민감한 시나리오에서 커널 명령줄을 사용하여 SELinux를 비활성화해야 합니다.
또한 이 변경 사항을 반영하도록 Anaconda 설치 프로그램과 해당 도움말 페이지가 업데이트되었습니다. 또한 이러한 변경으로 인해 LSM(Linux Security Module) 후크에 대한 초기화 후 읽기 전용 액세스가 가능합니다.
시나리오에 SELinux를 비활성화해야 하는 경우 selinux=0
매개 변수를 커널 명령줄에 추가합니다.
자세한 내용은 SELinux 런타임 비활성화 FedoraECDHE 페이지에 대한 지원 제거를 참조하십시오.
SELinux 정책에 제한된 추가 서비스
RHEL 9.3 릴리스에는 다음 systemd
서비스를 제한하는 SELinux 정책에 추가 규칙이 추가되었습니다.
-
QAT
-
systemd-pstore
-
boothd
-
fdo-manufacturing-server
-
fdo-rendezvous-server
-
fdo-client-linuxapp
-
fdo-owner-onboarding-server
결과적으로 이러한 서비스는 더 이상 unconfined_service_t
SELinux 레이블로 실행되지 않으며 SELinux 강제 모드에서 성공적으로 실행됩니다.
11장. 네트워킹
다음 장에서는 RHEL 8과 RHEL 9 간의 네트워킹에 대한 주요 변경 사항이 포함되어 있습니다.
11.1. 커널
하이퍼레어 VPN은 기술 프리뷰로 사용할 수 있습니다.
Red Hat이 지원되지 않는 기술 프리뷰로 제공하는 Wireoctets는 Linux 커널에서 실행되는 고성능 VPN 솔루션입니다. 최신 암호화 기능을 사용하며 다른 VPN 솔루션보다 쉽게 구성할 수 있습니다. 또한 무선의 작은 코드-basis는 공격에 대한 면적을 줄이며, 따라서 보안이 향상됩니다.
자세한 내용은 Wire>-< VPN 설정을 참조하십시오.
PRP 및 CryostatR 프로토콜은 기술 프리뷰로 사용 가능
RHEL 9.3부터 hsr
커널 모듈은 지원되지 않는 기술 프리뷰로 제공됩니다. 이 모듈은 다음 프로토콜을 제공합니다.
- 병렬 중복 프로토콜(PRP)
- HSM(High-availability Seamless Redundancy)
Cryostat 62439-3 표준은 이러한 프로토콜을 정의하고 이 기능을 사용하여 이더넷 네트워크에서 제로 손실 중복을 구성할 수 있습니다.
SRv6 (SRv6)을 통한 세그먼트 라우팅을 기술 프리뷰로 사용 가능
RHEL 9.3 커널은 지원되지 않는 기술 프리뷰로 IPv6(SRv6)를 통한 Segment Routing을 제공합니다. 이 기능을 사용하여 에지 컴퓨팅의 트래픽 흐름을 최적화하거나 데이터 센터의 네트워크 프로그래밍 가능성을 개선할 수 있습니다. 그러나 가장 중요한 사용 사례는 5G 배포 시나리오에서 E2E(End-to-end) 네트워크 분할입니다. 이 영역에서 SRv6 프로토콜은 특정 애플리케이션 또는 서비스에 대한 네트워크 요구 사항을 해결하기 위해 프로그래밍 가능한 사용자 지정 네트워크 슬라이스 및 리소스 예약을 제공합니다. 동시에 솔루션을 단일 용도 어플라이언스에 배포할 수 있으며 더 작은 컴퓨팅 공간의 필요성을 충족합니다.
NetworkManager 및 Nmstate API는 MACsec 하드웨어 오프로드 지원
하드웨어가 이 기능을 지원하는 경우 NetworkManager 및 Nmstate API를 모두 사용하여 MACsec 하드웨어 오프로드를 활성화할 수 있습니다. 결과적으로 CPU에서 네트워크 인터페이스 카드로 암호화와 같은 MACsec 작업을 오프로드할 수 있습니다.
이 기능은 지원되지 않는 기술 프리뷰입니다.
11.2. 네트워크 유형
네트워크 팀이 더 이상 사용되지 않음
teamd
서비스와 libteam
라이브러리는 Red Hat Enterprise Linux 9에서 더 이상 사용되지 않으며 다음 주요 릴리스에서 제거될 예정입니다. 교체로 네트워크 팀 대신 본딩을 구성합니다.
Red Hat은 비슷한 기능을 갖춘 두 가지 기능, 본딩 및 팀을 유지 관리하기 위해 커널 기반 본딩에 중점을 두고 있습니다. 본딩 코드에는 높은 고객 채택이 있고 견고하며 활발한 커뮤니티 개발이 있습니다. 결과적으로 본딩 코드는 개선 사항 및 업데이트를 수신합니다.
팀을 본딩으로 마이그레이션하는 방법에 대한 자세한 내용은 네트워크 팀 구성을 네트워크 본딩으로 마이그레이션을 참조하십시오.
11.3. NetworkManager
NetworkManager는 키 파일 형식으로 새 네트워크 구성을 저장합니다.
이전에는 NetworkManager에서 새 네트워크 구성을 /etc/sysconfig/network-scripts/
에 ifcfg
형식으로 저장했습니다. RHEL 9.0부터 RHEL은 새 네트워크 구성을 /etc/NetworkManager/system-connections/
에 키 파일 형식으로 저장합니다. /etc/sysconfig/network-scripts/
에 구성이 저장되는 연결은 여전히 중단되지 않습니다. 기존 프로필의 수정 사항은 이전 파일을 계속 업데이트합니다.
Red Hat에서 더 많은 연결 프로필 속성에 대한 지원을 추가하는 경우 이러한 속성은 키 파일 형식의 프로필에서만 작동합니다.
WEP Wi-Fi 연결 방법이 제거되었습니다.
안전하지 않은 WEP(WEP) Wi-Fi 연결 방법이 RHEL 9에서 제거되었습니다. 보안 Wi-Fi 연결의 경우 Wi-Fi Protected Access 3 (WPA3) 또는 WPA2 연결 방법을 사용하십시오.
11.4. MPTCP
MPtcpd 서비스를 사용할 수 있습니다.
이번 업데이트를 통해 MPtcpd
서비스를 사용할 수 있습니다. 통합된 MP tcpize
도구가 있는 사용자 공간 기반 MPTCP
경로 관리자입니다.
MP tcpd
서비스는 MPTCP 경로의 간소화된 자동 구성을 제공합니다. 네트워크 장애 또는 재구성의 경우 'MPTCP
소켓의 안정성이 향상되어 이점을 누릴 수 있습니다.
이제 MP tcpize 도구를
사용하여 추가 외부 종속성 없이 기존 systemd
장치에서 MPTCP
프로토콜을 활성화할 수 있습니다.
11.5. 방화벽
ipset
및 iptables-nft
패키지가 더 이상 사용되지 않음
RHEL에서 ipset
및 iptables-nft
패키지가 더 이상 사용되지 않습니다. iptables-nft
패키지에는 iptables
,ip6tables
,ebtables
및 arptables
와 같은 다양한 도구가 포함되어 있습니다. 이러한 툴은 더 이상 새 기능을 받지 않으며 새 배포에 사용하는 것은 권장되지 않습니다. 대신 nftables
패키지에서 제공하는 nft
명령행 툴을 사용하는 것이 좋습니다. 가능한 경우 기존 설정을 nft
로 마이그레이션해야 합니다.
nftables로 마이그레이션하는 방법에 대한 자세한 내용은 iptables에서 nftables로 마이그레이션 하고 iptables-translate(8)
및 ip6tables-translate(8)
도움말 페이지를 참조하십시오.
지원되지 않는 xt_u32
Netfilter 모듈이 제거되었습니다.
RHEL 8에는 지원되지 않는 xt_u32
모듈이 포함되어 iptables
사용자가 패킷 헤더 또는 페이로드에서 임의의 32비트를 일치시킬 수 있었습니다. 이 모듈은 RHEL 9에서 제거되었습니다. 대신 nftables
패킷 필터링 프레임워크를 사용합니다. nftables
에 네이티브 일치 항목이 없는 경우 nftables
의 원시 페이로드와 일치하는 기능을 사용합니다. 자세한 내용은 nft(8)
매뉴얼 페이지의 원시 페이로드 표현식
섹션을 참조하십시오.
11.6. InfiniBand 및 RDMA 네트워크
ibdev2netdev
스크립트가 RHEL 9에서 제거되었습니다.
ibdev2netdev
는 네트워크 장치와 RDMA(Remote Direct Memory Access) 어댑터 포트 간의 모든 연결을 표시할 수 있는 도우미 유틸리티였습니다. 이전에는 Red Hat이 rdma-core
패키지에 ibdev2netdev
를 포함했습니다. Red Hat Enterprise Linux 9에서 ibdev2netdev
가 제거되어 rdmatool
유틸리티로 대체되었습니다. 이제 iproute
패키지에 rdmatool
이 포함됩니다.
11.7. 제거된 기능
RHEL 9에는 레거시 네트워크 스크립트가 포함되어 있지 않습니다.
RHEL 9에는 RHEL 8에서 더 이상 사용되지 않는 레거시 네트워크 스크립트를 제공하는 network-scripts
패키지가 포함되어 있지 않습니다. RHEL 9에서 네트워크 연결을 구성하려면 NetworkManager를 사용합니다. 자세한 내용은 네트워킹 구성 및 관리 설명서를 참조하십시오.
지원되지 않는 xt_u32
Netfilter 모듈이 제거되었습니다.
RHEL 8에는 지원되지 않는 xt_u32
모듈이 포함되어 iptables
사용자가 패킷 헤더 또는 페이로드에서 임의의 32비트를 일치시킬 수 있었습니다. 이 모듈은 RHEL 9에서 제거되었습니다. 대신 nftables
패킷 필터링 프레임워크를 사용합니다. nftables
에 네이티브 일치 항목이 없는 경우 nftables
의 원시 페이로드와 일치하는 기능을 사용합니다. 자세한 내용은 nft(8)
매뉴얼 페이지의 원시 페이로드 표현식
섹션을 참조하십시오.
Red Hat Enterprise Linux 9의 net-snmp 통신에는 데이터 암호화 표준(DES) 알고리즘을 사용할 수 없습니다.
이전 버전의 RHEL에서 DES는 net-snmp 클라이언트와 서버 간의 보안 통신을 위한 암호화 알고리즘으로 사용되었습니다. RHEL 9에서는 OpenSSL 라이브러리에서 DES 알고리즘을 지원하지 않습니다. 알고리즘은 비보안으로 표시되어 있으므로 net-snmp에 대한 DES 지원이 제거되었습니다.
12장. 커널
다음 장에서는 RHEL 8과 RHEL 9 사이의 커널의 주요 변경 사항이 포함되어 있습니다.
12.1. kdump 메모리 할당의 주요 변경 사항
kexec-tools
패키지는 RHEL 9의 기본 crashkernel
메모리 예약 값을 지원합니다.
kexec-tools
패키지에서 기본 crashkernel
메모리 예약 값을 유지 관리합니다. kdump
서비스는 기본값을 사용하여 각 커널에 대해 크래시커널
메모리를 예약합니다. 이 구현을 통해 시스템에 사용 가능한 메모리가 4GB 미만인 경우 kdump
에 대한 메모리 할당도 향상됩니다.
기본 crashkernel
값으로 예약된 메모리가 시스템에 충분하지 않은 경우 기본값을 참조로 사용하여 crashkernel
매개변수를 늘릴 수 있습니다.
기본 crashkernel
값을 쿼리하려면 다음을 수행합니다.
$ kdumpctl get-default-crashkernel
부팅 명령 줄의 crashkernel=auto
옵션은 RHEL 9 이상 릴리스에서 더 이상 지원되지 않습니다.
자세한 내용은 /usr/share/doc/kexec-tools/crashkernel-howto.txt
파일을 참조하십시오.
12.2. RHEL for Real Time 커널의 주요 변경 사항
TPM 1.2 보안 암호화 프로세서가 RHEL 9에서 더 이상 지원되지 않습니다.
신뢰할 수 있는 플랫폼 모듈 (TPM) 보안 암호화 프로세서 버전 1.2가 제거되었으며 RHEL 9 이상 버전에서 더 이상 지원되지 않습니다. TPM 2.0은 TPM 1.2를 대체하고 TPM 1.2에 비해 많은 개선사항을 제공합니다. TPM 2.0은 이전 버전과 호환되지 않습니다.
TPM 1.2에 대한 지원이 필요한 애플리케이션의 경우 RHEL 8을 사용하는 것이 좋습니다.
ARM, AMD 및 Intel 64비트 아키텍처에서 동적 선점 스케줄링 활성화
동적 스케줄링을 사용하면 컴파일 시간 대신 부팅 또는 런타임에 커널의 선점 모드를 변경할 수 있습니다. 동적 선점 기능을 사용하면 기본 선점 모델을 재정의하여 스케줄링 대기 시간을 개선할 수 있습니다.
/sys/kernel/debug/sched/preempt
파일에는 런타임 수정을 지원하는 현재 설정이 포함되어 있습니다. DYNAMIC_PREEMPT
옵션을 사용하여 부팅 시 preempt=
변수를 none
,자발적인
또는 전체로
설정합니다. 자발적인
선점이 기본값입니다.
새로운 명령행 인터페이스가 tuna
툴에 추가되었습니다.
이제 tuna
툴에서 사용하기 쉽고 유지 관리하기 쉽도록 보다 표준화된 명령 메뉴와 함께 명령줄 인터페이스를 제공합니다. 새로운 명령줄 인터페이스는 argparse
구문 분석 모듈을 기반으로 합니다. 이번 개선된 기능을 통해 다음 작업을 수행할 수 있습니다.
- 애플리케이션 및 커널 스레드의 속성을 변경합니다.
- 이름 또는 번호로 인터럽트 요청(IRQ)에서 작동합니다.
- 프로세스 식별자를 사용하여 작업 또는 스레드에서 작동합니다.
- CPU 또는 소켓 번호를 사용하여 CPU 및 CPU 세트를 지정합니다.
tuna -h
명령을 사용하면 명령줄 인수와 해당 옵션을 출력할 수 있습니다. 각 명령에는 tuna [command] -h
명령으로 볼 수 있는 선택적 인수가 있습니다.
실시간 커널에 사용 가능한 런타임 확인 메커니즘
런타임 확인은 시스템 이벤트와 공식 사양 간의 동작 동등성을 확인하는 가볍고 엄격한 방법입니다. 런타임 확인에는 추적 지점에 연결하는 커널에 통합된 모니터가 있습니다
. 상태가 정의된 사양에서 벗어나는 경우 런타임 확인 프로그램은 반응자를 활성화하여 로그 파일에서 이벤트를 캡처하거나 시스템 종료와 같은 응답을 활성화하여 극단적인 경우 실패 전파를 방지합니다.
자세한 내용은 짧은 대기 시간 작업을 위해 RHEL 9 for Real Time을 최적화합니다.
RHEL 9에서는 CONFIG_RT_GROUP_SCHED
가 비활성화되어 있습니다.
RHEL 8에서는 기본 제어 그룹이 cgroups v1
였으며 /sys/fs/cgroup/cpu,cpuacct/cpu.rt_period_us
및 /sys/fs/cgroup/cpu,cpuacct/cpu ,cpuacct/cpu.rt_runtime_us
등 제어 파일을 사용하여 cgroup
별로 실시간 작업에 대한 CPU 대역폭을 지정할 수 있습니다. 그러나 RHEL 9에서는 cgroups v2가 기본 제어 그룹이고
CPU 컨트롤러에 해당하는 제어 파일이 없으므로 cgroups v2
CONFIG_RT_GROUP_SCHED
커널 구성 옵션이 비활성화됩니다. /proc/sys/kernel/sched_rt_runtime_us
및 /proc/sys/kernel/sched_rt_period_us
전역 설정을 계속 사용할 수 있으며 stalld
백그라운드 프로세스와 함께 CPU 시간 별지를 방지할 수 있습니다.
12.3. 커널에 대한 주요 변경 사항
64k 페이지 크기 커널
Red Hat은 4k 페이지를 지원하는 RHEL 9 for ARM 커널 외에도 64k 페이지 ( kernel-64k
)를 지원하는 선택적 커널 패키지를 제공합니다.
64k 페이지 크기 커널은 ARM 플랫폼의 대규모sets에 유용한 옵션입니다. 이는 일부 유형의 메모리 및 CPU 집약적 작업에 대해 더 나은 성능을 제공합니다.
설치 시 64비트 ARM 아키텍처 시스템에서 페이지 크기를 선택해야 합니다. Kickstart
파일의 패키지 목록에 kernel-64k
패키지를 추가하여 Kickstart를 통해서만 kernel-64k
를 설치할 수 있습니다.
kernel-64k
설치에 대한 자세한 내용은 고급 RHEL 9 설치 수행을 참조하십시오.
RHEL 9에서 cgroup-v2
가 기본적으로 활성화되어 있습니다
제어 그룹 버전 2(cgroup-v
2) 기능은 제어 그룹 관리를 간소화하는 단일 계층 구조 모델을 구현합니다. 또한 한 번에 단일 제어 그룹의 멤버만 프로세스가 될 수 있습니다. systemd
와의 심도 있는 통합으로 RHEL 시스템에서 리소스 제어를 구성할 때 최종 사용자 환경이 향상됩니다.
새로운 기능의 개발은 대부분 cgroup-v2
에 대해 수행되며, cgroup-v1
에서는 누락된 일부 기능이 있습니다. 마찬가지로 cgroup-v1
에는 cgroup-v2
에서 누락된 일부 레거시 기능이 포함되어 있습니다. 또한 제어 인터페이스는 다릅니다. 따라서 cgroup-v1에 직접 종속된 타사 소프트웨어가
환경에서 제대로 실행되지 않을 수 있습니다.
cgroup-v
2
cgroup-v1
을 사용하려면 커널 명령줄에 다음 매개변수를 추가해야 합니다.
systemd.unified_cgroup_hierarchy=0 systemd.legacy_systemd_cgroup_controller
cgroup-v1
및 cgroup-v2
는 커널에서 완전히 활성화됩니다. 커널 관점에서는 기본 제어 그룹 버전이 없으며 시작 시 마운트할 systemd
에 의해 결정됩니다.
커널 변경으로 인해 타사 커널 모듈에 영향을 줄 수 있음
5.9 이전 커널 버전의 Linux 배포판에서는 GPL 함수를 비GPL 기능으로 내보내기가 지원되었습니다. 결과적으로 shim
메커니즘을 통해 독점적인 기능을 GPL 커널 기능과 연결할 수 있었습니다. 이번 릴리스에서 RHEL 커널은 shim
을 다시 사용하여 GPL을 시행하는 RHEL의 기능을 향상시키는 업스트림 변경 사항을 통합합니다.
파트너 및 ISV(독립 소프트웨어 벤더)는 GPL을 준수하기 위해 초기 버전의 RHEL 9에서 커널 모듈을 테스트해야 합니다.
RHEL 9에서 코어 예약이 지원됩니다.
코어 스케줄링 기능을 사용하면 서로 신뢰해서는 안 되는 작업이 동일한 CPU 코어를 공유하지 않도록 방지할 수 있습니다. 마찬가지로, 사용자는 CPU 코어를 공유할 수 있는 작업 그룹을 정의할 수 있습니다.
이러한 그룹을 지정할 수 있습니다.
- 일부 SMT(Cross-Symmetric Multithreading) 공격을 완화하여 보안을 강화하기 위해
- 전체 코어가 필요한 작업을 격리합니다. 예를 들어 실시간 환경의 작업 또는 단일 지침, 여러 데이터(SIMD) 처리와 같은 특정 프로세서 기능에 의존하는 작업의 경우
자세한 내용은 코어 스케줄링 을 참조하십시오.
RHEL 9에서 kernelopts
환경 변수가 제거됨
RHEL 8에서는 GRUB2 부트로더를 사용하는 시스템의 커널 명령줄 매개 변수가 kernelopts
환경 변수에 정의되어 있었습니다. 이 변수는 각 커널 부팅 항목에 대해 /boot/grub2/grubenv
파일에 저장되었습니다. 그러나 kernelopts
를 사용하여 커널 명령줄 매개 변수를 저장하는 것은 강력하지 않았습니다. 따라서 Red Hat에서 kernelopts
및 커널 명령줄 매개 변수가 이제 /boot/loader/entries/<KERNEL_BOOT_ENTRY>.conf
파일에 대신 LS(Boot Loader Specification) 스니펫에 저장됩니다.
Red Hat은 마이너 릴리스에서 커널 기호만 보호
Red Hat은 보호된 커널 기호를 사용하여 커널 모듈을 컴파일하는 경우에만 EUS (Extended Update Support) 릴리스 내에서 향후 모든 업데이트에서 커널 모듈이 계속 로드되도록 합니다. RHEL 9의 마이너 릴리스 간에 ABI(커널 애플리케이션 바이너리 인터페이스)는 보장되지 않습니다.
12.4. 부트 로더에 대한 주요 변경 사항
기본적으로 숨겨진 부트 로더 메뉴
RHEL 9.1부터 RHEL이 설치된 유일한 운영 체제이고 이전 부팅에 성공한 경우 GRUB 부트 로더가 기본적으로 부팅 메뉴를 숨기도록 구성되어 있습니다. 이로 인해 이러한 시스템에서 부팅 환경이 더 원활해집니다.
부팅 메뉴에 액세스하려면 다음 옵션 중 하나를 사용합니다.
- 시스템을 부팅한 후 Esc 를 반복적으로 누릅니다.
- 시스템을 부팅한 후 F8 을 반복적으로 누릅니다.
- 부팅 중 Shift 키를 누릅니다.
이 기능을 비활성화하고 기본적으로 부트 로더 메뉴를 구성하려면 다음 명령을 사용합니다.
# grub2-editenv - unset menu_auto_hide
부트 로더 구성 파일은 CPU 아키텍처 전반에서 통합됩니다.
GRUB 부트 로더에 대한 설정 파일이 지원되는 모든 CPU 아키텍처의 /boot/grub2/
디렉토리에 저장됩니다. 이전에 UEFI 시스템에서 기본 설정 파일로 사용된 GRUB의 /boot/efi/EFI/redhat/grub.cfg
파일인 /boot/grub2/grub.cfg
파일을 로드하면 됩니다.
이러한 변경은 GRUB 설정 파일의 레이아웃을 단순화하고 사용자 환경을 개선하며 다음과 같은 주요 이점을 제공합니다.
- EFI 또는 레거시 BIOS를 사용하여 동일한 설치를 부팅할 수 있습니다.
- 모든 아키텍처에 동일한 문서 및 명령을 사용할 수 있습니다.
- GRUB 설정 도구는 더 이상 심볼릭 링크에 의존하지 않고 플랫폼별 사례를 처리할 필요가 없기 때문에 더욱 강력합니다.
- GRUB 설정 파일 사용은COSA( CoreOS Assembler) 및 OSBuild에서 생성된 이미지와 정렬됩니다.
- GRUB 설정 파일 사용은 다른 Linux 배포판과 일치합니다.
RHEL이 32비트 UEFI에서 더 이상 부팅되지 않음
32비트 UEFI 펌웨어에 대한 지원이 GRUB 및 shim
부트 로더에서 제거되었습니다. 결과적으로 RHEL 9에는 64 비트 UEFI가 필요하며 32 비트 UEFI를 사용하는 64 비트 시스템에서 더 이상 부팅할 수 없습니다.
다음 패키지는 이러한 변경 사항의 일부로 제거되었습니다.
-
grub2-efi-ia32
-
grub2-efi-ia32-cdboot
-
grub2-efi-ia32-modules
-
shim-ia32
13장. 하드웨어 지원
다음 장에서는 RHEL 8과 RHEL 9 사이의 하드웨어 활성화에 대한 주요 변경 사항을 설명합니다.
13.1. 유지 관리되지 않는 하드웨어 지원
다음 장치(드라이버, 어댑터)는 더 이상 RHEL 9에서 일상적으로 테스트 또는 업데이트되지 않습니다. Red Hat은 보안 버그를 포함한 심각한 버그를 수정할 수 있습니다. 이러한 장치는 더 이상 프로덕션 환경에서 사용되지 않으며 다음 주요 릴리스에서 비활성화됩니다.
PCI 장치 ID는 vendor:device:subvendor:subdevice 형식으로 되어 있습니다. 장치 ID가 나열되어 있지 않으면 해당 드라이버와 연결된 모든 장치가 유지 관리되지 않습니다. 시스템에서 하드웨어의 PCI ID를 확인하려면 lspci -nn
명령을 실행합니다.
장치 ID | 드라이버 | 장치 이름 |
---|---|---|
bnx2 | Qlogic BCM5706/5708/5709/5716 드라이버 | |
e1000 | Intel® PRO/1000 네트워크 드라이버 | |
hpsa | Hewlett-Packard 회사: 스마트 어레이 컨트롤러 | |
0x10df:0x0724 | lpfc | Emulex Corporation: OneConnect FCoE 개시자(Skyhawk) |
0x10df:0xe200 | lpfc | Emulex Corporation: LPe15000/LPe16000 시리즈 8Gb/16Gb 파이버 채널 어댑터 |
0x10df:0xf011 | lpfc | Emulex Corporation: 토로: LightPulse 파이버 채널 호스트 어댑터 |
0x10df:0xf015 | lpfc | Emulex Corporation: 토로: LightPulse 파이버 채널 호스트 어댑터 |
0x10df:0xf100 | lpfc | Emulex Corporation: LPe12000 시리즈 8Gb 파이버 채널 어댑터 |
0x10df:0xfc40 | lpfc | Emulex Corporation: Saturn-X: LightPulse 파이버 채널 호스트 어댑터 |
0x10df:0xe220 | be2net | Emulex Corporation: OneConnect NIC (Lancer) |
0x1000:0x0071 | megaraid_sas | Broadcom / LSI : MR SAS HBA 2004 |
0x1000:0x0073 | megaraid_sas | Broadcom / LSI : SAS 2008 [Falcon] |
0x1000:0x0079 | megaraid_sas | Broadcom / LSI : domainRAID SAS 2108 [Liberator] |
0x1000:0x005b | megaraid_sas | Broadcom / LSI : iDRAID SAS 2208 [Thunderbolt] |
0x1000:0x006E | mpt3sas | Broadcom / LSI : SAS2308 PCI-Express Fusion-MPT SAS-2 |
0x1000:0x0080 | mpt3sas | Broadcom / LSI : SAS2208 PCI-Express Fusion-MPT SAS-2 |
0x1000:0x0081 | mpt3sas | Broadcom / LSI : SAS2208 PCI-Express Fusion-MPT SAS-2 |
0x1000:0x0082 | mpt3sas | Broadcom / LSI : SAS2208 PCI-Express Fusion-MPT SAS-2 |
0x1000:0x0083 | mpt3sas | Broadcom / LSI : SAS2208 PCI-Express Fusion-MPT SAS-2 |
0x1000:0x0084 | mpt3sas | Broadcom / LSI : SAS2208 PCI-Express Fusion-MPT SAS-2 |
0x1000:0x0085 | mpt3sas | Broadcom / LSI : SAS2208 PCI-Express Fusion-MPT SAS-2 |
0x1000:0x0086 | mpt3sas | Broadcom / LSI : SAS2308 PCI-Express Fusion-MPT SAS-2 |
0x1000:0x0087 | mpt3sas | Broadcom / LSI : SAS2308 PCI-Express Fusion-MPT SAS-2 |
mptbase | Fusion MPT SAS Host 드라이버 | |
MPTSas | Fusion MPT SAS Host 드라이버 | |
mptscsih | Fusion MPT SCSI Host 드라이버 | |
mptspi | Fusion MPT SAS Host 드라이버 | |
myri10ge | Myricom 10G 드라이버 (10GbE) | |
netxen_nic | Qlogic/NetXen(1/10) GbE Intelligent Ethernet Driver | |
0x1077:0x2031 | qla2xxx | QLogic Corp.: iam8324 기반 16Gb Fibre Channel to PCI Express Adapter |
0x1077:0x2532 | qla2xxx | QLogic Corp.: ntp2532 기반 8Gb 파이버 채널을 PCI Express HBA로 이동 |
0x1077:0x8031 | qla2xxx | QLogic Corp.: 8300 시리즈 10GbE Converged Network Adapter (FCoE) |
qla3xxx | QLogic ISP3XXX Network Driver v2.03.00-k5 | |
0x1924:0x0803 | sfc | Solarflare 통신: SFC9020 10G Ethernet Controller |
0x1924:0x0813 | sfc | Solarflare 통신: SFL9021 10GBASE-T Ethernet Controller |
nicpf | Cavium ThunderX NIC PF 드라이버 | |
nicvf | Cavium ThunderX NIC VF 드라이버 | |
nvmet-fc | NVMe/Fabrics FC 대상 드라이버 | |
nvmet_tcp | NVMe/TCP 대상 드라이버 |
13.2. 제거된 하드웨어 지원
RHEL 9에서 다음 장치(드라이버, 어댑터)가 제거되었습니다.
PCI 장치 ID는 vendor:device:subvendor:subdevice 형식으로 되어 있습니다. 장치 ID가 나열되어 있지 않으면 해당 드라이버와 연결된 모든 장치가 유지 관리되지 않습니다. 시스템에서 하드웨어의 PCI ID를 확인하려면 lspci -nn
명령을 실행합니다.
장치 ID | 드라이버 | 장치 이름 |
---|---|---|
Soft-RoCE (rdma_rxe) | ||
HNS-RoCE | HNS GE/10GE/25GE/50GE/50GE/100GE RDMA 네트워크 컨트롤러 | |
liquidio | Cavium LiquidIO Intelligent Server Adapter Driver | |
liquidio_vf | Cavium LiquidIO Intelligent Server Adapter Virtual Function Driver | |
aarch64:Ampere:Potenza | Ampere eMAG | |
aarch64:APM:Potenza | 적용된 Micro X-Gene | |
ppc64le:ibm:4d:* | Power8 | |
ppc64le:ibm:4b:* | Power8E | |
ppc64le:ibm:4c:* | Power8NVL | |
s390x:ibm:2964:* | z13 | |
s390x:ibm:2965:* | z13s | |
v4l/dvb | 텔레비전 및 비디오 캡처 장치 |
14장. 파일 시스템 및 스토리지
다음 장에서는 RHEL 8과 RHEL 9 간의 파일 시스템과 스토리지에 대한 주요 변경 사항이 포함되어 있습니다.
14.1. 파일 시스템
XFS 파일 시스템은 이제 bigtime
및 inobtcount
기능을 지원합니다.
XFS 파일 시스템은 이제 두 개의 새로운 디스크 기능을 지원하며, 각 기능은 RHEL 9의 mkfs.xfs
에 의해 기본적으로 활성화되어 있습니다. 이 두 가지 새로운 기능은 다음과 같습니다.
-
2038년을 초과한 타임 스탬프 지원 (
bigtime
). -
대규모 파일 시스템의 마운트 시간을 줄이기 위해 inode btree 카운터(
obtcount
)
이번 업데이트의 결과 RHEL 8 시스템에서 기본 mkfs.xfs
매개 변수를 사용하여 생성된 파일 시스템을 마운트할 수 없습니다.
RHEL 8 커널과 호환되는 새 파일 시스템을 생성하려면 mkfs.xfs
명령줄에 -m bigtime=0,inobtcount=0
을 추가하여 이러한 새 기능을 비활성화합니다. 이러한 방식으로 생성된 파일 시스템은 2038년을 초과한 타임스탬프를 지원하지 않습니다.
이러한 기능을 지원하지 않는 RHEL 8에서 생성된 파일 시스템은 파일 시스템이 포함된 마운트 해제 블록 장치에서 xfs_admin
유틸리티를 사용하여 업그레이드할 수 있습니다. 이 작업 전에 파일 시스템에서 일관성을 확인하는 것이 좋습니다. 또한 이 명령은 변경 후 장치에서 xfs_repair
를 실행합니다.
bigtime
지원을 활성화하려면 다음을 수행합니다.
-
xfs_admin -O bigtime=1 /dev/device
inode btree 카운터를 활성화하려면 다음을 수행합니다.
-
xfs_admin -O inobtcount=1 /dev/device
둘 다 동시에 활성화하려면 다음을 수행합니다.
-
xfs_admin -O bigtime=1,inobtcount=1 /dev/device
자세한 내용은 xfs_admin(8)
도움말 페이지를 참조하십시오.
RHEL 9에서 exFAT 파일 시스템이 지원됨
RHEL 9에서 exFAT 파일 시스템이 지원됩니다. 이는 다른 운영 체제와 외부 USB 스토리지 및 상호 운용성 및 데이터 교환용으로 설계된 파일 시스템입니다. 파일 시스템은 범용, 성능 또는 확장 가능한 Linux 파일 시스템으로 설계되지 않습니다. exFAT 파일 시스템은 exfatprogs
패키지를 설치하고 mkfs .exfat 유틸리티를 사용하여 생성할 수 있습니다.
자세한 내용은 mkfs.exfat(8)
도움말 페이지를 참조하십시오.
ext4 파일 시스템은 이제 2038년 이후의 타임스탬프 지원
ext4 파일 시스템은 이제 2038년 이후의 타임 스탬프를 지원하고 있습니다. 이 기능은 완전히 자동이며 이를 활용하기 위해 사용자 작업이 필요하지 않습니다. 유일한 요구 사항은 inode 크기가 기본적으로 128바이트보다 넓다는 것입니다.
새로운 nfsv4-client-utils
패키지
NFSv4만 지원하는 데 필요한 최소한의 데모 세트와 툴을 포함하는 새 패키지 nfsv4-client-utils
가 추가되었습니다. 이는 표준 nfs-utils
패키지를 대체하는 것입니다.
이제 포맷 버전 1802로 GFS2 파일 시스템이 생성됩니다.
RHEL 9의 GFS2 파일 시스템은 버전 1802 형식으로 생성됩니다. 이렇게 하면 다음과 같은 기능을 사용할 수 있습니다.
-
신뢰할 수 있는
네임스페이스의 확장 속성("trusted.* xattrs")은gfs2 및 gfs
2-utils
에서 인식됩니다. -
rgrplvb
옵션은 기본적으로 활성화되어 있습니다. 이렇게 하면gfs2
에서 업데이트된 리소스 그룹 데이터를 DLM 잠금 요청에 연결할 수 있으므로 잠금을 얻은 노드가 디스크에서 리소스 그룹 정보를 업데이트할 필요가 없습니다. 이 경우 성능이 향상되며 경우에 따라 성능이 향상됩니다.
새 형식 버전으로 생성된 파일 시스템은 이전 RHEL 버전 및 이전 버전의 fsck.gfs2
유틸리티에서 마운트할 수 없습니다.
사용자는 -o format=1801 옵션과 함께
버전으로 파일 시스템을 생성할 수 있습니다.
mkfs.gfs2
명령을 실행하여 이전 형식
사용자는 마운트 해제된 파일 시스템에서 tunegfs2 -r 1802 장치를
실행하는 이전 파일 시스템의 형식 버전을 업그레이드할 수 있습니다. 형식 버전을 다운그레이드할 수 없습니다.
일관된 사용자 환경을 위해 Samba 유틸리티의 옵션 이름이 변경 및 제거됨
일관된 명령줄 인터페이스를 제공하도록 Samba 유틸리티가 개선되었습니다. 이러한 개선에는 이름 변경 및 제거된 옵션이 포함되어 있습니다. 따라서 업데이트 후 문제를 방지하려면 Samba 유틸리티를 사용하는 스크립트를 검토하고 필요한 경우 업데이트합니다.
Samba 4.15에는 Samba 유틸리티에 다음과 같은 변경 사항이 추가되었습니다.
- 이전에는 Samba 명령줄 유틸리티에서 알 수 없는 옵션을 자동으로 무시했습니다. 예기치 않은 동작을 방지하기 위해 유틸리티에서 알 수 없는 옵션을 일관되게 거부합니다.
-
이제 여러 명령줄 옵션에 해당
smb.conf
변수가 있어 기본값을 제어합니다. 명령줄 옵션에smb.conf
변수 이름이 있는지 확인하려면 유틸리티의 도움말 페이지를 참조하십시오. -
기본적으로 Samba 유틸리티는 이제 표준 오류(
stderr
)에 기록됩니다. 이 동작을 변경하려면--debug-stdout
옵션을 사용합니다. -
--client-protection=off|sign|encrypt
옵션이 공통 구문 분석기에 추가되었습니다. 모든 유틸리티에서 다음 옵션의 이름이 변경되었습니다.
-
--kerberos
to--use-kerberos=required|desired|off
-
--krb5-ccache
to--use-krb5-ccache=CCACHE
-
--scope
to--netbios-scope=SCOPE
-
--use-ccache
to--use-winbind-ccache
-
모든 유틸리티에서 다음 옵션이 제거되었습니다.
-
-e
및--encrypt
-
-C
--use-winbind-ccache
에서 제거 -
-
netbios-scope
에서 제거됨 -
-
s 및--signing
-
중복 옵션을 방지하기 위해 다음 유틸리티에서 특정 옵션이 제거되거나 이름이 변경되었습니다.
-
ndrdump
:-l
은 더 이상--load-dso
에 사용할 수 없습니다. -
net
:-l
은 더 이상 사용할 수 없습니다.--long
-
sharesec
:-V
는 더 이상--viewsdl
에 사용할 수 없습니다. -
smbcquotas
:--user
의 이름이--quota-user
로 변경되었습니다. -
nmbd
:--log-stdout
의 이름이--debug-stdout
으로 변경되었습니다. -
smbd
:--log-stdout
의 이름이--debug-stdout
으로 변경되었습니다. -
winbindd
:--log-stdout
의 이름이--debug-stdout
으로 변경되었습니다.
-
cramfs
모듈이 제거됨
사용자 부족으로 인해 cramfs
커널 모듈이 제거되었습니다. squashfs
는 대체 솔루션으로 사용하는 것이 좋습니다.
RHEL 9에서 필수 파일 잠금 지원이 제거되었습니다.
RHEL 9 이상 버전에서는 필수 파일 잠금이 지원되지 않습니다. mand
마운트 옵션은 이 커널에서 무시하고 해당 사용은 시스템 로그에 경고가 생성됩니다.
NFSv2는 더 이상 지원되지 않습니다.
RHEL 9 NFS 클라이언트와 서버는 더 이상 NFSv2를 지원하지 않습니다.
Stratis 스토리지 관리자 사용 가능
Stratis는 로컬 스토리지 관리자입니다. 사용자에게 추가 기능을 갖춘 스토리지 풀에 관리되는 파일 시스템을 제공합니다.
- 스냅샷 및 씬 프로비저닝 관리
- 필요에 따라 파일 시스템 크기 자동 확장
- 파일 시스템 관리
- 풀 수준 암호화
- TMP2 및 NBDE 지원
Stratis 스토리지를 관리하려면 stratisd
백그라운드 서비스와 통신하는 stratis
유틸리티를 사용합니다.
자세한 내용은 Stratis 설명서를 참조하십시오. Stratis 파일 시스템 설정.
DAX 마운트 옵션 및 reflink가 호환 가능
이제 Reflinked 파일이 일반적으로 DAX 모드와 호환됩니다. 파일 시스템 DAX 마운트 옵션 -o dax=always
는 reflink 사용 파일 시스템과 호환됩니다. reflinked된 파일은 inode 플래그를 사용하여 DAX 모드로 설정할 수 있습니다. 자세한 내용은 xfs(5)
도움말 페이지를 참조하십시오.
14.2. 스토리지
VDO 관리 소프트웨어가 제거되었습니다.
RHEL 9에서는 python 기반 VDO 관리 소프트웨어를 더 이상 사용할 수 없습니다. 이 소프트웨어 대신 VDO 볼륨을 관리하기 위해 LVM-VDO 구현을 사용합니다.
VDO에서 여러 쓰기 정책이 제거됨
VDO에는 더 이상 여러 쓰기 정책이 없습니다. VDO는 이제 async
write 정책을 독점적으로 사용합니다. 'sync-unsafe' 및 'async-unsafe' 쓰기 정책이 제거되었습니다.
Stratis 스토리지 관리자 사용 가능
Stratis는 로컬 스토리지 관리자입니다. 사용자에게 추가 기능을 갖춘 스토리지 풀에 관리되는 파일 시스템을 제공합니다.
- 스냅샷 및 씬 프로비저닝 관리
- 필요에 따라 파일 시스템 크기 자동 확장
- 파일 시스템 관리
- 풀 수준 암호화
- TMP2 및 NBDE 지원
Stratis 스토리지를 관리하려면 stratisd
백그라운드 서비스와 통신하는 stratis
유틸리티를 사용합니다.
자세한 내용은 Stratis 설명서를 참조하십시오. Stratis 파일 시스템 설정.
15장. 고가용성 및 클러스터
다음 장에서는 RHEL 8과 RHEL 9 사이의 고가용성 및 클러스터에 대한 주요 변경 사항을 설명합니다.
15.1. 고가용성 및 클러스터에 대한 주요 변경 사항
clufter
툴을 지원하는 pcs
명령이 제거되었습니다.
클러스터 구성 형식을 분석하기 위해 clufter
툴을 지원하는 pcs
명령이 제거되었습니다. 다음 명령이 제거되었습니다.
-
CMAN / RHEL6 HA 클러스터 구성을 가져오는
pcs config import-cman
-
동일한 클러스터를 재생성하는
pcs 명령 목록으로 클러스터 구성을 내보낼
pcs
config 내보내기
OCF Resource Agent API 1.1 표준용 pcs
suppport
pcs
명령줄 인터페이스에서 OCF 1.1 리소스 및 STONITH 에이전트를 지원합니다. 이러한 지원의 구현의 일환으로 모든 에이전트의 메타데이터는 에이전트가 OCF 1.0 또는 OCF 1.1 에이전트인지에 관계없이 OCF 스키마를 준수해야 합니다. 에이전트의 메타데이터가 OCF 스키마를 준수하지 않는 경우 pcs
는 에이전트를 잘못된 것으로 간주하고 --force
옵션을 지정하지 않는 한 에이전트의 리소스를 생성하거나 업데이트하지 않습니다. 에이전트를 나열하는
Web UI 및 pcs 명령으로 목록에서 잘못된 메타데이터가 있는 에이전트를 생략합니다.
pcs
d
새로운 pcs
구문 분석에는 복제 메타 속성을 지정할 때 meta
키워드가 필요합니다.
pcs
명령 형식의 일관성을 보장하기 위해 meta 키워드를 지정하지 않고 pcs resource clone
,pcs resource promotable
및 pcs resource create
명령을 사용하여 복제 메타
속성을 구성합니다.
이전에는 pcs 리소스 clone 및
명령에서 pcs resource
promotablemeta
키워드가 무시되었습니다. 그러나 pcs resource create
명령에서는 clone 키워드 뒤에 clone
키워드가 아닌 복제가 아닌 리소스에 할당되었을 때 meta
키워드 뒤에 지정된 메타 속성입니다. 업데이트된 구문 분석 알고리즘을 사용하면 clone
키워드를 따를 때 meta
키워드 뒤에 지정된 메타 속성이 복제본에 할당됩니다. 이전 형식을 사용하는 기존 스크립트와의 호환성을 유지하려면 pcs resource create
명령을 사용하여 복제된 리소스를 생성할 때 이 새 인수 처리를 활성화하려면 --future
명령 옵션을 지정해야 합니다.
다음 명령에서는 메타 속성 mv=v1
을 사용하여 리소스와 meta 속성이 mv=v2
인 복제를 생성합니다.
pcs resource create dummy1 ocf:pacemaker:Dummy meta m1=v1 clone meta m2=v2 --future
16장. 동적 프로그래밍 언어, 웹 서버, 데이터베이스 서버
다음 장에서는 RHEL 8과 RHEL 9 사이의 동적 프로그래밍 언어, 웹 서버 및 데이터베이스 서버에 대한 주요 변경 사항을 설명합니다.
16.1. 동적 프로그래밍 언어, 웹 및 데이터베이스 서버에 대한 주요 변경 사항
RHEL 9의 초기 애플리케이션 스트림 버전
RHEL 9는 기존 dnf install
명령을 사용하여 RPM 패키지로 설치할 수 있는 초기 Application Stream 버전을 제공하여 Application Streams 환경을 향상시킵니다.
RHEL 9.0에서는 다음과 같은 동적 프로그래밍 언어를 제공합니다.
- Node.js 16
- Perl 5.32
- PHP 8.0
- Python 3.9
- Ruby 3.0
RHEL 9.0에는 다음과 같은 버전 제어 시스템이 포함되어 있습니다.
- Git 2.31
- Subversion 1.14
다음은 RHEL 9.0과 함께 제공되는 웹 서버입니다.
- Apache HTTP Server 2.4
- nginx 1.20
다음 프록시 캐싱 서버를 사용할 수 있습니다.
- Varnish Cache 6.6
- squid 5.2
RHEL 9.0에서는 다음과 같은 데이터베이스 서버를 제공합니다.
- MariaDB 10.5
- MySQL 8.0
- PostgreSQL 13
- Redis 6.2
일부 추가 Application Stream 버전은 향후 마이너 RHEL 9 릴리스에서 라이프 사이클이 짧은 모듈로 배포됩니다.
RHEL 8 이후 Python 에코시스템의 주요 차이점
버전이 없는 python
명령
python
명령(/usr/bin/python
)의 버전이 지정되지 않은 형식인 python-unversioned-command
패키지에서 사용할 수 있습니다. 일부 시스템에서는 이 패키지가 기본적으로 설치되지 않습니다. 버전이 없는 python
명령 형식을 수동으로 설치하려면 dnf install /usr/bin/python
명령을 사용합니다.
RHEL 9에서 python
명령의 버전이 없는 형식은 기본 Python 3.9 버전을 가리키며 python3 및 python
3.9
명령과 동일합니다. RHEL 9에서는 버전이 없는 명령이 Python 3.9와 다른 버전을 가리키도록 구성할 수 없습니다.
python
명령은 대화형 세션을 위한 것입니다. 프로덕션에서는 python3
,python3.9
또는 python3.11
을 명시적으로 사용하는 것이 좋습니다.
dnf remove /usr/bin/
명령을 사용하여 버전이 없는 python 명령을 제거할 수 있습니다.
python
다른 python
또는 python3
명령이 필요한 경우 /usr/local/bin
또는 ~/.local/bin
에서 사용자 지정 심볼릭 링크를 생성하거나 Python 가상 환경을 사용할 수 있습니다.
python3-pip 패키지의
/usr/bin/pip
와 같은 다른 몇 가지 버전이 없는 명령을 사용할 수 있습니다. RHEL 9에서 버전이 없는 모든 명령은 기본 Python 3.9 버전을 가리킵니다.
아키텍처별 Python wheel
RHEL 9에 구축된
아키텍처별 Python wheel은 업스트림 아키텍처 이름 지정을 새로 준수하므로 고객은 RHEL 9 에서
Python wheel을 빌드하고 RHEL이 아닌 시스템에 설치할 수 있습니다. RHEL의 이전 릴리스에서 빌드된
Python wheel은 호환 가능하며 RHEL 9에 설치할 수 있습니다. 이는 아키텍처별 순수
Python 코드가 있는 Python wheel이 아닌 각 아키텍처에 대해 빌드된 Python 확장이 포함된
wheel에만 영향을 미칩니다.
libdb
주요 변경 사항
RHEL 8 및 RHEL 9는 현재 LGPLv2 라이센스에 따라 배포되는libdb
(Lerkeley DB) 버전 5.3.28을 제공합니다. 업스트림 Berkeley DB 버전 6은 AGPLv3 라이센스에 따라 사용할 수 있으며, 이는 보다 제한적입니다.
libdb
패키지는 RHEL 9부터 더 이상 사용되지 않으며 향후 주요 RHEL 릴리스에서는 사용할 수 없을 수 있습니다. RHEL 9의 libdb
에서 암호화 알고리즘이 제거되었습니다. RHEL 9에서 여러 libdb
종속성이 제거되었습니다.
libdb
사용자는 다른 키-값 데이터베이스로 마이그레이션하는 것이 좋습니다. 자세한 내용은 RHEL에서 더 이상 사용되지 않는 Berkeley DB(libdb)에 대한 지식 베이스 문서 Available replacements for the deprecated Berkeley DB(libdb) 를 참조하십시오.
RHEL 9.2 이후 사용 가능
RHEL 9.2에는 Apache Tomcat 서버 버전 9가 도입되었습니다. Tomcat은 Java Servlet 및 JavaServer Pages 기술을 위한 공식 참조 구현에 사용되는 서블릿 컨테이너입니다. Java Servlet 및 JavaServer Pages 사양은 Sun에서 Java Community Process에 따라 개발했습니다. Tomcat은 공개 및 참여 환경에서 개발되었으며 Apache Software License 버전 2.0에 따라 출시되었습니다.
17장. 컴파일러 및 개발 도구
다음 장에서는 RHEL 8과 RHEL 9 간의 컴파일러 및 개발 툴에 대한 주요 변경 사항을 설명합니다.
17.1. glibc에 대한 주요 변경 사항
이제 모든 스레드 API가 libc.so.6
에 병합되었습니다.
RHEL 8에서 시스템 스레드 라이브러리인 libpthread.so
는 별도의 라이브러리였습니다. RHEL 9에서는 모든 스레드 API가 코어 C 라이브러리 libc.so.6
에 병합되었습니다. 코어 C 라이브러리로 스레딩을 이동하면 라이브러리에서 기본적으로 스레드를 지원할 수 있습니다. 단일 파일을 사용하면 스레드 API와 코어 C, POSIX 및 BSD API가 모두 동시에 업데이트되므로 내부 업그레이드 프로세스가 원활하게 수행됩니다.
개발자는 스레드된 애플리케이션을 연결할 때 -lpthread
옵션을 계속 사용할 수 있지만 더 이상 필요하지 않습니다.
이전에는 라이브러리에서 pthread_create
또는 pthread_cancel
에 약한 참조를 사용하여 프로세스를 멀티 스레드일 수 있는지 탐지했습니다. libpthread.so
가 이제 핵심 C 라이브러리에 있기 때문에 이 검사가 항상 성공하므로 라이브러리는 이를 위해 __libc_single_threaded
기호를 사용해야 합니다.
libdl
라이브러리가 libc.so.6
에 병합되었습니다.
RHEL 8에서 libd l 라이브러리
는 별도의 라이브러리였습니다. RHEL 9에서는 libdl
라이브러리가 코어 C 라이브러리 libc.so.6
에 병합되었습니다. 즉, dlsym
함수를 연결하는 것이 훨씬 더 어려워지고 있습니다. 기호 확인 작동 방식을 제어해야 하는 애플리케이션은LD_AUDIT
(감사자) 인터페이스로 전환해야 합니다.
이제 libc.so.6
에 병합된 dns
및 파일
의 이름 서비스 스위치 서비스 플러그인
RHEL 8에서 파일
의 Name Service Switch(NSS) 서비스와 사용자 및 그룹 ID 관리 API에 데이터를 제공하는 dns
는 별도의 플러그인이었습니다. RHEL 9에서는 플러그인이 코어 C 라이브러리 libc.so.6에 병합되었습니다.
파일과
dns
서비스 공급자를 이동하면 마운트 네임스페이스 경계를 교차해야 하는 애플리케이션이 (예: 컨테이너 입력) 프로세스 시작 시 NSS 파일과
dns
액세스 서비스가 항상 로드되도록 할 수 있습니다.
해당 API가 파일
또는 dns
를 참조하는 nsswitch.conf
를 사용하는 사용자 및 그룹 API를 호출할 때 개발자는 해당 서비스가 항상 존재하고 기본 서비스 데이터를 제공할 수 있습니다.
18장. IdM (Identity Management)
다음 장에서는 RHEL 8과 RHEL 9 간의 IdM(Identity Management)에 대한 주요 변경 사항이 포함되어 있습니다.
18.1. 새로운 기능
SSSD에서 암호 없는 새로운 인증 방법을 사용할 수 있습니다.
RHEL 9.4에서는 FIDO2 사양과 호환되는 생체 인식 장치를 사용하도록 SSSD에서 암호 없는 인증을 활성화하고 구성할 수 있습니다(예: YubiKey). FIDO2 토큰을 미리 등록하고 RHEL IdM, Active Directory 또는 LDAP 저장소의 사용자 계정에 이 등록 정보를 저장해야 합니다. RHEL은 현재 USB 기반 토큰만 지원하는 libfido2
라이브러리와 FIDO2 호환성을 구현합니다.
Identity Management API가 완전히 지원됨
RHEL 9.3부터 IdM(Identity Management) API는 완전히 지원되는 기능입니다.
IdM API가 여러 버전의 API 명령을 사용하도록 향상된 경우에도 기존 툴과 스크립트를 사용할 수 있습니다. 이러한 개선 사항은 호환되지 않는 방식으로 명령의 동작을 변경하지 않습니다. 다음과 같은 이점이 있습니다.
- 관리자는 관리 클라이언트보다 서버에서 이전 또는 이후 버전의 IdM을 사용할 수 있습니다.
- 서버에서 IdM 버전이 변경되어도 개발자는 특정 버전의 IdM 호출을 사용할 수 있습니다.
한 측에서 사용하는 경우(예: 기능에 대한 새 옵션을 도입하는 최신 버전)와 관계없이 서버와의 통신이 가능합니다.
- 참고
- IdM API는 JSON-RPC 인터페이스를 제공하지만 이러한 유형의 액세스는 지원되지 않습니다. 대신 Python을 사용하여 API에 액세스하는 것이 좋습니다. Python을 사용하면 서버에서 메타데이터 검색과 같은 중요한 부분을 자동화하여 사용 가능한 모든 명령을 나열할 수 있습니다.
Identity Management 설치 패키지가 구체화되었습니다.
이전에는 RHEL 8에서 IdM 패키지가 모듈로 배포되었으므로 스트림을 활성화하고 원하는 설치에 해당하는 프로필을 설치해야 했습니다. IdM 설치 패키지는 RHEL 9에서 데모되어 있으므로 다음 dnf 명령을 사용하여 IdM 서버 패키지를 설치할 수 있습니다.
통합 DNS 서비스가 없는 서버의 경우:
# dnf install ipa-server
통합 DNS 서비스가 있는 서버의 경우:
# dnf install ipa-server ipa-server-dns
SSSD 암시적 파일 공급자 도메인은 기본적으로 비활성화되어 있습니다.
/etc/shadow 및
에서 그룹 정보와 같은 로컬 파일에서 사용자 정보를 검색하는 SSSD 암시적 파일 /etc/
groups프로바이더
도메인이 이제 기본적으로 비활성화됩니다.
SSSD를 사용하여 로컬 파일에서 사용자 및 그룹 정보를 검색하려면 다음을 수행합니다.
SSSD 구성. 다음 옵션 중 하나를 선택합니다.
sssd.conf
구성 파일에서id_provider=files
옵션을 사용하여 로컬 도메인을 명시적으로 구성합니다.[domain/local] id_provider=files ...
sssd.conf
구성파일에서
enable_files_domain=true
옵션을 설정하여 파일 공급자를 활성화합니다.[sssd] enable_files_domain = true
이름 서비스 스위치를 구성합니다.
# authselect enable-feature with-files-provider
FIPS 140-3 호환 키 암호화를 활성화한 VMDK용 새로운 영역 구성 템플릿
이 업데이트에서는 /var/kerberos/krb5kdc/kdc.conf
파일에 새로운 EXAMPLE.COM
.COM 영역 구성 예를 제공합니다. 두 가지 변경 사항을 제공합니다.
-
FIPS 140-3 호환
AES HMAC SHA-2
제품군이 키 암호화를 위해 지원되는 유형 목록에 추가됩니다. -
iPXE 마스터 키의 암호화 유형은
AES 256 HMAC SHA-1
에서AES 256 HMAC SHA-384
로 전환됩니다.
이 업데이트는 독립 실행형 MIT 영역에 관한 것입니다. RHEL Identity Management에서 KDC(Kerberos Distribution Center) 구성을 변경하지 마십시오.
새 영역에는 새 구성 템플릿을 사용하는 것이 좋습니다. 템플릿은 이미 배포된 영역에는 영향을 미치지 않습니다. 템플릿에 따라 영역 구성을 업그레이드하려는 경우 다음 사항을 고려하십시오.
마스터 키를 업그레이드하는 경우 CloudEvent 구성의 설정을 변경하는 것만으로는 충분하지 않습니다. MIT Kerberos 설명서에 설명된 프로세스를 따르십시오.
키 암호화에 대해 지원되는 유형에 AES HMAC SHA-2
제품군을 추가하는 것은 CloudEvent의 기존 항목에 영향을 미치지 않기 때문에 어느 시점에서도 안전합니다. 키는 새 주체를 생성하거나 자격 증명을 갱신할 때만 생성됩니다. 이 새 유형의 키는 기존 키를 기반으로 생성할 수 없습니다. 특정 주체에 이러한 새로운 암호화 유형을 사용할 수 있도록 하려면 인증 정보를 갱신해야 합니다. 즉, 서비스 주체에 대한 키탭도 갱신해야 합니다.
보안 주체에 AES HMAC SHA-2
키가 포함되어 있지 않아야 하는 유일한 경우는 Active Directory (AD) cross-realm ticket-granting ticket (TGT)입니다. AD는 RFC8009를 구현하지 않기 때문에 AES HMAC SHA-2
암호화 유형 제품군을 사용하지 않습니다. 따라서 cross-realm TGS-REQ using an AES HMAC SHA-2
-encrypted cross-realm TGT를 사용하는 경우 오류가 발생했습니다. MIT Kerberos 클라이언트가 AD에 대해 AES HMAC SHA-2
를 사용하지 못하도록 하는 가장 좋은 방법은 AD 교차 영역에 AES HMAC SHA-2
키를 제공하지 않는 것입니다. 이렇게 하려면 AD에서 지원하는 모든 키 암호화 유형의 명시적 목록을 사용하여 교차 영역 TGT 항목을 생성해야 합니다.
kadmin.local <<EOF add_principal +requires_preauth -e aes256-cts-hmac-sha1-96,aes128-cts-hmac-sha1-96 -pw [password] krbtgt/[MIT realm]@[AD realm] add_principal +requires_preauth -e aes256-cts-hmac-sha1-96,aes128-cts-hmac-sha1-96 -pw [password] krbtgt/[AD realm]@[MIT realm] EOF
MIT IKEvrboros 클라이언트가 AES HMAC SHA-2
암호화 유형을 사용하도록 하려면 클라이언트 및 CloudEvent 구성 모두에서 허용되는
암호화 유형도 설정해야 합니다. RHEL에서 이 설정은 crypto-policy 시스템에서 관리합니다. 예를 들어 RHEL 9에서는 DEFAULT
암호화 정책을 사용하는 호스트에서는 AES HMAC SHA-2
및 AES HMAC SHA-1
암호화 티켓을 허용하는 반면, FIPS
암호화 정책을 사용하는 호스트는 AES HMAC SHA-2
만 허용합니다.
기존 RHEL ansible-freeipa
리포지토리의 대안: Ansible Automation Hub
이번 업데이트를 통해 표준 RHEL 리포지토리에서 다운로드하는 대신 Ansible Automation Hub(AAH)에서 ansible-freeipa
모듈을 다운로드할 수 있습니다. AAH를 사용하면 이 리포지토리에서 사용할 수 있는 ansible-freeipa
모듈의 빠른 업데이트를 활용할 수 있습니다.
AAH에서 ansible-freeipa
역할 및 모듈은 컬렉션 형식으로 배포됩니다. AAH 포털의 콘텐츠에 액세스하려면 AAP(Ansible Automation Platform) 서브스크립션이 필요합니다. 또한 ansible
버전 2.14 이상이 필요합니다.
redhat.rhel_idm
컬렉션에는 기존 ansible-freeipa
패키지와 동일한 콘텐츠가 있습니다. 그러나 컬렉션 형식은 네임스페이스와 컬렉션 이름으로 구성된 정규화된 컬렉션 이름(FQCN)을 사용합니다. 예를 들어 redhat.rhel_idm.ipadnsconfig
모듈은 RHEL 리포지토리에서 제공하는 ansible-freeipa
의 ipadnsconfig
모듈에 해당합니다. 네임스페이스와 컬렉션 이름을 조합하면 개체가 고유하며 충돌 없이 공유할 수 있습니다.
SSSD 다중 스레드 성능 개선
이전 버전에서는 SSSD가 Red Hat Directory Server 및 Identity Management와 같은 다중 스레드 애플리케이션에서 병렬 요청을 직렬화했습니다. RHEL 9.1부터 ns
및 pam
와 같은 모든 SSSD 클라이언트 라이브러리는 요청을 직렬화하지 않으므로 더 나은 성능을 위해 여러 스레드의 요청을 병렬로 실행할 수 있습니다.
직렬화의 이전 동작을 활성화하려면 환경 변수 SSS_LOCKFREE
를 NO
로 설정합니다.
18.2. 확인된 문제
iPXE가 없는 사용자는 업그레이드 후 IdM에 로그인할 수 없습니다.
IdM(Identity Management) 복제본을 RHEL 9.2로 업그레이드한 후 IdM Kerberos Distribution Centre(KDC)에서 계정에 할당된 SID(보안 식별자)가 없는 사용자에게 TGT( ticket-granting ticket)를 발행하지 못할 수 있습니다. 따라서 사용자는 자신의 계정에 로그인할 수 없습니다.
이 문제를 해결하려면 토폴로지의 다른 IdM 복제본에서 IdM 관리자로 다음 명령을 실행하여 CloudEvents를 생성합니다.
# ipa config-mod --enable-sid --add-sids
이후 사용자가 여전히 로그인할 수 없는 경우 Directory Server 오류 로그를 검사합니다. 사용자 POSIX ID를 포함하도록 ID 범위를 조정해야 할 수 있습니다.
RHEL 8.6 또는 이전 버전에서 초기화된 FIPS 모드의 IdM 배포에 FIPS 모드에서 RHEL 9 복제본을 추가하는 데 실패합니다.
FIPS 140-3을 준수하려는 기본 RHEL 9 FIPS 암호화 정책은 RFC3961 섹션 5.1에 정의된 대로 AES HMAC-SHA1 암호화 유형의 키 파생 기능을 사용할 수 없습니다.
이 제약 조건으로 인해 첫 번째 서버가 RHEL 8.6 또는 이전 시스템에 설치된 FIPS 모드의 RHEL 8 IdM 환경에 FIPS 모드에서 RHEL 9 IdM 복제본을 추가할 수 없습니다. 이는 RHEL 9와 이전 RHEL 버전 간에 일반적으로 AES HMAC-SHA1 암호화 유형을 사용하지만 AES HMAC-SHA2 암호화 유형을 사용하지 않기 때문입니다.
이 문제를 해결하려면 RHEL 9 복제본에서 AES HMAC-SHA1을 사용하도록 설정하십시오.
# update-crypto-policies --set FIPS:AD-SUPPORT
암호화 정책을 FIPS:AD-SUPPORT
로 설정하면 FIPS 140-3을 준수하는 이미 허용된 암호화 유형 목록에 다음 암호화 유형을 추가하고 있습니다.
- aes256-cts:normal
- aes256-cts:special
- aes128-cts:normal
- aes128-cts:special
결과적으로 IdM 배포에 RHEL 9 복제본을 올바르게 추가합니다.
RHEL 7 및 RHEL 8 서버에서 누락된 AES HMAC-SHA2- 암호화 Kerberos 키를 생성하는 절차를 제공하는 작업이 진행 중입니다. 이렇게 하면 RHEL 9 복제본에서 FIPS 140-3 컴플라이언스를 얻을 수 있습니다. 그러나 Kerberos 키 암호화의 설계로 인해 기존 키를 다른 암호화 유형으로 변환할 수 없기 때문에 이 프로세스를 완전히 자동화할 수 없습니다. 유일한 방법은 사용자에게 암호를 업데이트하도록 요청하는 것입니다.
RHEL 8 배포의 첫 번째 IdM 서버에 다음 명령을 입력하여 IdM 마스터 키의 암호화 유형을 볼 수 있습니다.
# kadmin.local getprinc K/M | grep -E '^Key:'
출력의 문자열에 sha1
용어가 포함된 경우 RHEL 9 복제본에서 AES HMAC-SHA1 사용을 활성화해야 합니다.
Microsoft의 Active Directory 구현에서는 SHA-2 HMAC를 사용하는 RFC8009 Kerberos 암호화 유형을 아직 지원하지 않습니다. IdM-AD 신뢰가 구성된 경우 IdM 마스터 키의 암호화 유형이 aes256-cts-hmac-sha384-192
인 경우에도 FIPS:AD-SUPPORT 암호화 하위 정책 사용이 필요합니다.
18.3. 재배치된 패키지
모든 종속 항목이 있는 AppStream 리포지토리에서 Ansible -freeipa
를 사용할 수 있습니다.
이전에는 RHEL 8.5 및 이전 버전에서 ansible-freeipa
패키지를 설치하기 전에 Ansible 리포지토리를 활성화하고 ansible
패키지를 설치해야 했습니다. RHEL 9에서는 예비 단계 없이 ansible-freeipa
를 설치할 수 있습니다. ansible-freeipa
를 설치하면 ansible-core
가 종속 항목으로 자동으로 설치됩니다. 두 패키지 모두 rhel-9-for-x86_64-appstream-rpms
리포지토리에서 사용할 수 있습니다.
RHEL 9의 Ansible-freeipa
에는 RHEL 8.5 및 이전 버전에 포함된 모든 모듈이 포함되어 있습니다.
클러스터형 Samba 패키지는 복구 스토리지 및 Gluster Samba 리포지토리에서 사용할 수 있습니다.
ctdb
클러스터형 Samba 패키지는 이제 복구 스토리지 및 Gluster Samba 리포지토리에서 사용할 수 있습니다. 이전에는 RHEL 8에서 클러스터형 Samba 패키지를 BaseOS 리포지토리에서 사용할 수 있었습니다.
18.4. 제거된 기능
nss-pam-ldapd 패키지가 제거되었습니다.
RHEL에서 nss-pam-ldapd
패키지가 제거되었습니다. Red Hat은 nslcd
서비스의 기능을 완전히 대체하는 SSSD 및 ldap
공급자로 마이그레이션할 것을 권장합니다. SSSD에는 다음과 같은 nss-pam-ldapd
사용자의 요구 사항을 구체적으로 처리하는 기능이 있습니다.
- 호스트 데이터베이스
- 네트워크 데이터베이스
- 서비스 데이터베이스
NIS 패키지가 제거되었습니다.
다음 NIS(Network Information Service) 구성 요소가 RHEL에서 제거되었습니다.
-
nss_nis
-
yp-tools
-
ypbind
-
ypserv
NIS 기술이 오래된 설계 패턴을 기반으로 하며 더 이상 안전한 것으로 간주되지 않기 때문에 완전히 호환되는 기능을 직접 대체하지 않습니다.
대신 RHEL Identity Management 및 SSSD를 사용하는 것이 좋습니다.
openssh-ldap 패키지가 제거되었습니다.
openssh-ldap
하위 패키지는 업스트림을 유지 관리하지 않으므로 RHEL에서 제거되었습니다. Red Hat은 다른 IdM 솔루션과 더욱 안전하고 안전한 SSSD 및 sss_ssh_authorizedkeys
도우미를 사용할 것을 권장합니다.
기본적으로 SSSD ldap 및
공급자는 사용자 오브젝트의 ipa
sshPublicKey
LDAP 속성을 읽습니다(사용 가능한 경우). AD에는 공개 키를 저장할 기본 LDAP 속성이 없으므로 ad
공급자 또는 IdM 신뢰할 수 있는 도메인에는 AD(Active Directory)에서 SSH 공개 키를 검색할 수 없습니다.
ss_
도우미가 SSSD에서 키를 가져올 수 있도록 하려면 ssh
_authorizedkeyssssd.conf
파일의 services
옵션에 ssh
를 추가하여 ssh 응답을 활성화합니다. 자세한 내용은 sssd.conf(5)
man 페이지를 참조하십시오.
sshd
가 sss_ssh_authorizedkeys
를 사용하도록 허용하려면 sss_
파일에 다음 옵션을 추가합니다.
ssh_authorizedkeys(1) 도움말 페이지에 설명된 대로 /etc/ssh/sshd_
config
AuthorizedKeysCommand /usr/bin/sss_ssh_authorizedkeys AuthorizedKeysCommandUser nobody
custodia 패키지가 제거되었습니다.
custodia
패키지는 RHEL 9의 Red Hat Identity Management로 통합되었으며 더 이상 별도의 서비스로 제공되지 않습니다.
gssntlmssp 패키지가 제거되었습니다.
Windows NTLM(New Technology LAN Manager)이 안전하지 않은 것으로 간주되므로 gssntlmssp
패키지가 제거되었습니다.
nsslapd-conntablesize
구성 매개변수가 389-ds-base
에서 제거되었습니다.
nsslapd-conntablesize
구성 매개변수가 RHEL 9.3의 389-ds-base
패키지에서 제거되었습니다. 이전에는 nsslapd-conntablesize
구성 속성이 설정된 연결을 관리하는 연결 테이블의 크기를 지정했습니다. 설정된 연결의 관리를 개선하는 multi-listener 기능이 도입되면서 Directory Server는 이제 연결 테이블의 크기를 동적으로 계산합니다. 이렇게 하면 연결 테이블 크기가 너무 낮고 서버가 지원할 수 있는 연결 수에 영향을 미치는 경우에도 문제가 해결되었습니다. RHEL 9.3부터 nsslapd-maxdescriptors
및 nsslapd-reservedescriptors
속성만 사용하여 지원할 수 있는 TCP/IP 연결 수를 관리합니다.
FreeRADIUS에 대한 제한된 지원
RHEL 9에서는 FreeRADIUS 오퍼링의 일부로 다음 외부 인증 모듈이 지원되지 않습니다.
- MySQL, PostgreSQL, SQlite 및 unixODBC 데이터베이스 커넥터
-
Perl
언어 모듈 - REST API 모듈
기본 패키지의 일부로 제공되는 PAM 인증 모듈 및 기타 인증 모듈은 영향을 받지 않습니다.
제거된 모듈 교체는 커뮤니티 지원 패키지(예: Fedora 프로젝트에서)에서 찾을 수 있습니다.
또한 freeradius
패키지에 대한 지원 범위는 다음 사용 사례로 제한됩니다.
-
IdM(Identity Management)이 있는 무선 인증 공급자로 FreeRADIUS를 인증의 백엔드 소스로 사용합니다. 인증은
krb5
및 LDAP 인증 패키지를 통해 수행되거나 기본 FreeRADIUS 패키지에서 PAM 인증으로 수행됩니다. -
FreeRADIUS를 사용하여
Python 3
인증 패키지를 통해 IdM의 인증에 대한 소스 제공
이러한 제거와 달리 Red Hat은 FreeRADIUS를 통해 다음과 같은 외부 인증 모듈을 지원하고 있습니다.
-
krb5
및 LDAP 기반 인증 -
Python 3
인증
이러한 통합 옵션에 중점을 두는 것은 Red Hat IdM의 전략적 방향과 긴밀히 조정되는 것입니다.
19장. 웹 콘솔
다음 장에서는 RHEL 8과 RHEL 9 사이의 웹 콘솔에 대한 주요 변경 사항을 설명합니다.
19.1. RHEL 웹 콘솔 변경 사항
RHEL 9.2 이상의 새 설치 시 원격 루트 로그인 비활성화
보안상의 이유로 RHEL 9.2 이상의 새 설치에서는 원격 시스템에서 root 사용자로 웹 콘솔에 연결할 수 없습니다.
원격 root 로그인을 활성화하려면 다음을 수행합니다.
-
root 사용자로 텍스트 편집기에서
/etc/cockpit/disallowed-users
파일을 엽니다. -
파일에서
root
사용자 행을 제거합니다. - 변경 사항을 저장하십시오.
20장. 가상화
다음 장에서는 RHEL 8과 RHEL 9 간의 가상화에 대한 주요 변경 사항이 포함되어 있습니다.
20.1. KVM에 대한 주요 변경 사항
KVM 가상화는 IBM POWER에서 더 이상 지원되지 않습니다.
Red Hat Enterprise Linux 9.0 이상용 Red Hat KVM(커널 기반 가상 시스템)은 IBM POWER 하드웨어에서 지원되지 않습니다.
RHEL 7.5 및 이전 버전을 기반으로 하는 VM 머신 유형은 지원되지 않음
RHEL 9에서 VM(가상 머신)은 RHEL 7.5 이전 버전을 기반으로 한 머신 유형을 더 이상 지원하지 않습니다. 여기에는 RHEL의 이전 주요 버전에서 기본적으로 사용 가능한 func-i440fx-rhel7.5.0
및 이전 시스템 유형도 포함됩니다. 결과적으로 RHEL 9 호스트에서 이러한 머신 유형을 사용하여 VM을 시작하려고 하면 지원되지 않는 구성
오류가 발생합니다. 호스트를 RHEL 9로 업그레이드한 후 이 문제가 발생하면 Red Hat KnowledgeBase 를 참조하십시오.
RHEL 9는 여전히 IRQ -i440fx-rhel7.6.0
시스템 유형을 지원합니다. 그러나 RHEL은 향후 주요 업데이트에서 모든 i440x
시스템 유형에 대한 지원을 제거합니다.
20.2. libvirt에 대한 주요 변경 사항
모듈식 libvirt
데몬
RHEL 9에서 libvirt
라이브러리는 호스트의 개별 가상화 드라이버 세트를 처리하는 모듈식 데몬을 사용합니다. 예를 들어 virtqemud
데몬은 QEMU 드라이버를 처리합니다. 따라서 리소스 로드 최적화 및 모니터링과 같은 가상화 드라이버와 관련된 다양한 작업을 미세 조정할 수 있습니다.
또한 모놀리식 libvirt 데몬인 libvirtd
도 더 이상 사용되지 않습니다. 그러나 RHEL 8에서 RHEL 9로 업그레이드하는 경우 호스트는 여전히 libvirtd
를 사용하므로 RHEL 9에서 계속 사용할 수 있습니다.
하지만 Red Hat은 대신 모듈식 libvirt
데몬을 활성화하는 것이 좋습니다. 자세한 내용은 모듈식 libvirt 데몬 활성화 문서를 참조하십시오.
그러나 모듈식 libvirt
데몬으로 전환하면 libvirtd
를 사용하는 사전 구성된 작업이 중지됩니다.
virsh iface-*
명령은 이제 지원되지 않습니다.
virsh iface-start
및 virsh iface-destroy
과 같은 virsh iface-*
명령은 RHEL 9에서 더 이상 지원되지 않습니다. netcf
패키지를 제거했기 때문에 대부분의 패키지가 작동하지 않습니다. 네트워크 인터페이스를 만들고 수정하려면 NetworkManager
유틸리티(예: nmcli
)를 사용합니다.
20.3. QEMU의 주요 변경 사항
QEMU에는 더 이상 SGA 옵션om이 포함되지 않습니다.
RHEL 9에서 직렬 그래픽 어댑터(SGA) 옵션 Rom은 SeaBIOS의 동등한 기능으로 교체되었습니다. 그러나 VM(가상 머신) 구성에서 다음 XML 취약점을 사용하는 경우 이러한 변경 사항은 VM 기능에 영향을 미치지 않습니다.
<bios useserial='yes'/>
TPM 패스스루가 제거됨
더 이상 RHEL 9의 VM에 패스스루 백엔드를 사용하여 물리적 TPM(Trusted Platform Module) 장치를 할당할 수 없습니다. 이는 RHEL 8에서 지원되지 않는 기능입니다. 대신 에뮬레이터 백엔드를 사용하고 완전히 지원되는 vTPM 기능을 사용합니다.
기타 지원되지 않는 장치
QEMU는 다음 가상 장치를 더 이상 지원하지 않습니다.
-
Cirrus 그래픽 장치입니다. 기본 그래픽 장치는 이제 BIOS 기반 머신의
stdvga
로 설정되고 UEFI 기반 머신의bochs-display
로 설정됩니다. -
ac97
오디오 장치 RHEL 9에서libvirt
는 대신ich9
장치를 사용합니다.
Intel vGPU 제거
Intel vGPU 기능에 필요한 패키지는 RHEL 9.3에서 제거되었습니다.
이전에는 기술 프리뷰로 물리적 Intel GPU 장치를 중재
장치라는 여러 가상 장치로 나눌 수 있었습니다. 그런 다음 이러한 중재된 장치를 가상 GPU로 여러 VM(가상 머신)에 할당할 수 있습니다.
RHEL 9.3 이후에는 이 기능을 사용할 수 없습니다.
20.4. SPICE에 대한 주요 변경 사항
SPICE가 지원되지 않음
RHEL 9에서는 SPICE 원격 디스플레이 프로토콜이 더 이상 지원되지 않습니다. RHEL 9 호스트에서 SPICE를 사용하도록 구성된 VM이 시작되지 않고 지원되지 않는 설정
오류가 표시됩니다.
+
Red Hat은 SPICE 대신 원격 디스플레이 스트리밍을 위해 대체 솔루션을 사용할 것을 권장합니다.
원격 콘솔 액세스의 경우
VNC
프로토콜을 사용합니다. 그러나 SPICE에서 사용 가능한 특정 기능은 현재 지원되지 않거나 VNC에서 제대로 작동하지 않습니다. 여기에는 다음이 포함됩니다.- 호스트에서 VM으로 스마트 카드 공유(현재 타사 원격 시각화 솔루션에서만 지원됨)
- VM에서 호스트로의 오디오 재생
- 자동화된 VM 화면 크기 조정
- 호스트에서 VM으로 USB 리디렉션
- 호스트에서 VM으로 파일 전송 드래그(D)
-
또한
VNC
는 GNOME Boxes 애플리케이션에서 사용할 수 없습니다. 결과적으로 현재 RHEL 9에서는 박스를 사용할 수 없습니다.
- 고급 원격 디스플레이 기능의 경우 RDP, HP ZCentral Remote Boost 또는 Mechdyne TGX와 같은 타사 툴을 사용하십시오.
RHEL 9에서 호스팅되는 그래픽 VM의 경우, virtio-vga 및
가상 그래픽 카드를 사용하는 것이 좋습니다.
virtio-
gpu
VM을 SPICE 프로토콜에서 VNC
로 전환하는 방법에 대한 자세한 내용은 RHEL 9 KVM에서 spice 또는 qxl을 사용하여 가상 머신을 정의, 생성 또는 시작할 수 없음 문서를 참조하십시오.
21장. 컨테이너
다음 장에서는 RHEL 8과 RHEL 9 사이의 컨테이너에 대한 가장 주목할 만한 변경 사항이 포함되어 있습니다.
21.1. 컨테이너 관련 주요 변경 사항
container-tools
meta-package를 사용할 수 있습니다.
Podman, Buildah, Skopeo, CRIU, Udica 및 모든 필수 라이브러리를 포함하는 container-tools
RPM 메타 패키지를 RHEL 9에서 사용할 수 있습니다. RHEL 9에서는 안정적인 스트림을 사용할 수 없습니다. Podman, Buildah, Skopeo 등에 대한 안정적인 액세스를 받으려면 RHEL EUS 서브스크립션을 사용합니다.
container-tools
meta-package를 설치하려면 다음을 수행합니다.
container-tools
meta-package를 설치합니다.$ sudo dnf install container-tools
제어 그룹 성능 개선
이전 버전의 제어 그룹인 cgroup 버전 1(cgroup v1)으로 인해 다양한 애플리케이션의 성능 문제가 발생했습니다. cgroup 버전 2(cgroup v2)의 최신 제어 그룹 릴리스를 통해 시스템 관리자는 성능 문제가 발생하지 않고 애플리케이션의 리소스를 제한할 수 있습니다.
RHEL 9에서는 새로운 버전의 제어 그룹인 cgroups v2가 기본적으로 활성화되어 있습니다.
Podman에서 보안 짧은 이름 지원
[aliases]
테이블에 있는 registries.conf
파일에서 이미지의 단축 별칭을 구성할 수 있습니다. 짧은 이름 모드는 다음과 같습니다.
-
강제: 이미지 가져오기 중에 일치하는 별칭을 찾을 수 없는 경우 Podman은 사용자에게 unqualified-search 레지스트리 중 하나를 선택하라는 메시지를 표시합니다. 선택한 이미지를 성공적으로 가져오면 Podman은
$HOME/.cache/containers/short-name-aliases.conf
파일(rootless 사용자) 및/var/cache/containers/short-name-aliases.conf
(root user)에 자동으로 새로운 단축 별칭을 기록합니다. 사용자에게 메시지를 표시할 수 없는 경우 (예: stdin 또는 stdout는 TTY가 아님) Podman은 실패합니다. 둘 다 동일한 별칭을 지정하는 경우short-name-aliases.conf
파일이registries.conf
파일보다 우선합니다. 강제 모드는 RHEL 9의 기본값입니다. - 허용: 강제 모드와 유사하지만, 사용자에게 메시지를 표시할 수 없는 경우 Podman은 실패하지 않습니다. 대신 Podman은 지정된 순서로 모든 정규화되지 않은 레지스트리에서 검색합니다. 별칭은 기록되지 않습니다. RHEL 8에서는 허용 모드가 기본값입니다.
예제:
unqualified-search-registries=["registry.fedoraproject.org", "quay.io"] [aliases] "fedora"="registry.fedoraproject.org/fedora"
registries.conf
의 기본 컨테이너 레지스트리
/etc/containers/registries.conf
파일의 컨테이너 레지스트리 목록은 루트 사용자로, $HOME/.config/containers/registries.conf
에서 root 사용자로 찾을 수 있습니다. registries.conf
파일을 변경하면 기본 시스템 전체 검색 설정을 변경할 수 있습니다.
RHEL 8의 경우 unqualified-search-registries
는 다음과 같습니다.
unqualified-search-registries = ["registry.access.redhat.com", "registry.redhat.io", "docker.io"] short-name-mode = "permissive"
RHEL 9의 경우 unqualified-search-registries
는 다음과 같습니다.
unqualified-search-registries = ["registry.access.redhat.com", "registry.redhat.io", "docker.io"] short-name-mode = "enforcing"
기본 OCI 런타임 변경
이제 container-tools:rhel8
모듈에 crun
OCI 런타임을 사용할 수 있습니다. crun
컨테이너 런타임은 컨테이너에서 rootless 사용자의 추가 그룹에 액세스할 수 있는 주석을 지원합니다. 이는 setgid가 설정된 디렉터리에서 볼륨을 마운트하는 경우 또는 사용자가 그룹 액세스 권한만 있는 경우 컨테이너 작업에 유용합니다.
-
RHEL 8의 기본 컨테이너 런타임은
runc
입니다. -
RHEL 9의 기본 컨테이너 런타임은
crun
입니다.
RHEL 7 호스트에서 RHEL 9 컨테이너 실행은 지원되지 않습니다.
RHEL 7 호스트에서 RHEL 9 컨테이너 실행은 지원되지 않습니다.
자세한 내용은 Red Hat Enterprise Linux 컨테이너 호환성 매트릭스 를 참조하십시오.
기본 네트워크 스택
Podman은 RHEL 8 및 Netavark의 기본 네트워크 스택으로 CNI를 RHEL 9를 새로 설치하는 기본 네트워크 스택으로 사용합니다.
RHEL 8에서 RHEL 9로 인플레이스 업그레이드를 수행하는 경우 Podman의 네트워크 스택이 다음과 같이 설정됩니다.
-
/etc/containers/containers.conf
파일의network_backend
매개 변수가 설정되지 않았거나 RHEL 8의 Podman 네트워크 스택을 Netavark로 수동으로 업그레이드한 경우 Netavark. - 업그레이드 후 Podman이 처음 실행될 때 제공되는 컨테이너, 이미지, Pod 또는 네트워크가 있는 경우 CNI입니다. 그런 다음 새 Netavark 네트워크 스택으로 수동으로 업그레이드할 수 있습니다. CNI와 Netavark 네트워크 스택 간에 전환하는 방법에 대한 자세한 내용은 8.6 네트워크 스택 전환을 참조하십시오 CNI에서 Netavark 및 8.7 네트워크 스택 전환
올바른 백엔드가 선택되도록 network_backend
매개변수를 명시적으로 지정하는 것이 좋습니다.
podman 컨테이너 체크포인트 및
를 다른 네트워크 스택 시스템으로 마이그레이션할 수 없습니다. CNI 네트워크 스택에서 Netavark 네트워크 스택으로 전환하려면 컨테이너 이미지에서 컨테이너를 다시 생성합니다.
podman container restore
명령을 사용하여 기존 컨테이너
22장. 데스크탑
다음 장에서는 RHEL 8과 RHEL 9 간의 데스크탑에 대한 가장 주목할 만한 변경 사항이 포함되어 있습니다.
22.1. 데스크탑에서 주요 변경 사항
GNOME이 버전 40으로 업데이트
GNOME 환경이 GNOME 3.28에서 GNOME 40으로 업데이트되고 많은 새로운 기능이 추가되었습니다.
GNOME 40에는 새로운 활동 개요 설계가 포함되어 있습니다. 이렇게 하면 개요가 더 일관된 보기를 제공하며, 시스템 탐색 및 애플리케이션 시작을 위한 향상된 환경을 제공합니다. 이제 작업 공간이 수평으로 정렬되고 창 개요 및 애플리케이션 그리드가 수직으로 액세스됩니다.
GNOME의 기타 개선 사항은 다음과 같습니다.
- GNOME의 성능과 리소스 사용량이 크게 향상되었습니다.
- 사용자 인터페이스, 로그인 화면, 아이콘 및 데스크탑을 포함한 시각적 스타일이 새로 고침됩니다.
- GNOME 애플리케이션은 상단 패널에서 사용할 수 있는 애플리케이션 메뉴를 더 이상 사용하지 않습니다. 이제 기능이 애플리케이션 창의 주 메뉴에 있습니다.
- Settings(설정) 애플리케이션이 재설계되었습니다.
- 화면 공유 및 원격 데스크탑 세션이 개선되었습니다.
독점 NVIDIA 드라이버를 사용하는 경우 이제 개별 GPU를 사용하여 애플리케이션을 실행할 수 있습니다.
- 개요를 엽니다.
- 대시에서 애플리케이션 아이콘을 마우스 오른쪽 버튼으로 클릭합니다.
- 메뉴에서 Launch on Discrete GPU 항목을 선택합니다.
- 이제 Power Off / Log Out (전원 끄기/로그아웃) 메뉴에 Suspend (일시 중지) 옵션과 새 Restart 옵션이 포함되어 Alt 를 사용할 때 부트 로더 메뉴로 시스템을 재부팅할 수 있습니다.
- Flatpak 애플리케이션이 자동으로 업데이트됩니다.
- 이제 드래그 앤 드롭을 사용하여 개요에서 애플리케이션 아이콘을 폴더로 그룹화할 수 있습니다.
- 터미널 애플리케이션에서는 이제 오른쪽에서 왼쪽으로 또는 양방향 텍스트를 지원합니다.
- 포인터 위치 접근성 기능은 Wayland 세션에서 작동합니다. 기능을 활성화하면 Ctrl 을 누르면 화면의 포인터 위치가 강조 표시됩니다.
- 이제 GNOME Shell 확장은 소프트웨어 대신 Extensions 애플리케이션으로 관리됩니다. 확장 프로그램 애플리케이션은 업데이트 확장 기능, 확장 기본 설정 구성, 확장 제거 또는 비활성화를 처리합니다.
- 알림 팝업에 Do Not Disturb 버튼이 포함됩니다. 버튼을 활성화하면 화면에 알림이 표시되지 않습니다.
- 이제 암호가 필요한 시스템 대화 상자에 눈 (A) 아이콘을 클릭하여 암호 텍스트를 표시하는 옵션이 있습니다.
- 소프트웨어 애플리케이션은 이제 모바일 데이터 네트워크와 같은 측정된 네트워크를 자동으로 감지합니다. 현재 네트워크가 측정되면 소프트웨어는 데이터 사용량을 줄이기 위해 업데이트를 일시 중지합니다.
- 연결된 각 디스플레이는 Wayland 세션에서 다른 새로 고침 속도를 사용할 수 있습니다.
부분 표시 스케일링은 실험적 옵션으로 사용할 수 있습니다. 여기에는 사전 구성된 몇 가지 분수 비율이 포함됩니다.
실험적 분별 확장을 활성화하려면 활성화된 실험적 기능 목록에
scale-monitor-framebuffer
값을 추가합니다.$ gsettings set \ org.gnome.mutter experimental-features \ "['scale-monitor-framebuffer']"
결과적으로 부분 확장 옵션은 Settings (설정)의 Display (표시) 패널에서 액세스할 수 있습니다.
참고다음 오류와 함께 명령이 실패하는 경우:
error: Failed to execute child process “dbus-launch” (No such file or directory)
dbus-launch
패키지를 설치하고 명령을 반복합니다.
GNOME의 변경 사항에 대한 자세한 내용은 릴리스 노트 의 버전 3.30~40.0을 참조하십시오.
X.org Server가 더 이상 사용되지 않음
X.org 디스플레이 서버는 더 이상 사용되지 않으며 향후 주요 RHEL 릴리스에서 제거될 예정입니다. 대부분의 경우 기본 데스크탑 세션은 이제 Wayland 세션입니다.
X11 프로토콜은 XWayland 백엔드를 사용하여 완전히 지원됩니다. 결과적으로 X11 이 필요한 애플리케이션은 Wayland 세션에서 실행할 수 있습니다.
Red Hat은 Wayland 세션의 나머지 문제와 격차를 해결하기 위해 노력하고 있습니다.
사용자 세션을 X.org 백엔드로 다시 전환할 수 있습니다. 자세한 내용은 GNOME 환경 선택 및 표시 프로토콜 을 참조하십시오.
Wayland 세션은 이제 NVIDIA 드라이버에서 기본으로 설정되어 있습니다.
이제 NVIDIA 드라이버를 사용하는 경우 드라이버 구성에서 Wayland를 지원하는 경우 데스크탑 세션은 기본적으로 Wayland 디스플레이 프로토콜을 선택합니다. 이전 RHEL 릴리스에서 NVIDIA 드라이버는 항상 Wayland를 비활성화했습니다.
시스템에서 NVIDIA 드라이버를 사용하여 Wayland를 활성화하려면 커널 명령줄에 다음 옵션을 추가합니다.
-
nvidia-drm.modeset=1
-
NVreg_PreserveVideoMemoryAllocations=1
Wayland는 RHEL 8.0 이후 다른 그래픽 드라이버와 함께 기본 디스플레이 프로토콜이었습니다.
특정 조건에서 NVIDIA 드라이버는 Wayland 디스플레이 프로토콜을 비활성화하고 X.org 디스플레이 서버로 되돌립니다.
- NVIDIA 드라이버 버전이 470보다 낮은 경우
- 시스템이 하이브리드 그래픽을 사용하는 랩탑인 경우
- 필수 NVIDIA 드라이버 옵션을 활성화하지 않은 경우
-
NVIDIA 드라이버가 필수
systemd
서비스를 설치하지 않은 경우
또한 Wayland가 활성화되어 있지만, NVIDIA 드라이버 버전이 510 미만이면 데스크탑 세션은 기본적으로 X.org를 사용합니다.
현재 NVIDIA 드라이버와 함께 Wayland 세션은 아직 불완전하며 특정 알려진 문제가 있습니다. Red Hat은 GPU 스택의 이러한 격차와 문제를 해결하기 위해 NVIDIA와 적극적으로 협력하고 있습니다.
X.Org X11 비디오 드라이버가 modesetting으로 교체됨
다음 X.Org X11 비디오 드라이버가 제거되고 일반적인 modesetting
드라이버로 대체되었습니다.
-
xorg-x11-drv-ati
-
xorg-x11-drv-intel
-
xorg-x11-drv-nouveau
-
xorg-x11-drv-qxl
-
xorg-x11-drv-vesa
RHEL에서 지원하는 GPU에서 modesetting
드라이버를 자동으로 사용합니다.
RHEL 8 이상에서 제거된 드라이버에 대해 사용자 지정 X.Org 구성을 적용하면 RHEL 9에서는 구성이 적용되지 않습니다. RHEL 9로 업그레이드하기 전에 X.Org 구성 파일 및 디렉터리(예: /etc/X11/xorg.conf.d/
)를 확인하십시오.
이러한 변경은 Red Hat에서 유지 관리하지 않는 독점 NVIDIA 드라이버에는 영향을 미치지 않습니다.
pipeWire가 이제 기본 오디오 서비스입니다.
PipeWire 서비스는 이제 모든 오디오 출력 및 입력을 관리합니다. pipeWire 는 일반적인 사용 사례에서 PulseAudio 서비스와 전문적인 사용 사례에서 JACK 서비스를 대체합니다. 이제 시스템은 PulseAudio,JACK 또는 ALSA 프레임워크를 PipeWire 로 사용하는 애플리케이션에서 오디오를 리디렉션합니다.
이전 솔루션보다 PipeWire 의 이점은 다음과 같습니다.
- 소비자 및 전문 사용자를 위한 통합 솔루션
- 유연한 모듈식 아키텍처
- JACK 서비스와 유사한 고성능 및 짧은 대기 시간
- 향상된 보안을 위해 오디오 클라이언트 간의 격리
더 이상 이를 사용하는 애플리케이션에 대해 JACK 서비스를 구성할 필요가 없습니다. 이제 모든 JACK 애플리케이션이 기본 RHEL 구성에서 작동합니다.
PulseAudio 는 RHEL에서 계속 사용할 수 있으며 PipeWire 대신 활성화할 수 있습니다. 자세한 내용은 PipeWire에서 PulseAudio로 전환을 참조하십시오.
GNOME Boxes가 제거됨
GNOME Boxes 애플리케이션이 RHEL 9에서 제거되었습니다. SPICE 시스템을 사용하여 VM(가상 머신)에 연결합니다. RHEL 9에서는 더 이상 SPICE를 사용할 수 없으며 결과적으로 Boxes도 제거되었습니다.
Boxes가 필요한 경우 Red Hat은 flathub 리포지토리에서 Boxes를 설치하도록 제안합니다. boxes는 @hub에 있습니다. 이 버전의 Boxes는 SPICE를 계속 사용하므로 이전에 나열된 누락된 기능을 지원합니다.
1.8hub는 커뮤니티 저장소입니다. Red Hat은 flathub에서 설치한 Boxes에 대한 지원 또는 보증을 제공하지 않습니다.
RHEL 9의 SPICE에 대한 자세한 내용은 SPICE 섹션을 참조하십시오.
GNOME에서 power 프로필을 사용할 수 있습니다.
이제 GNOME 환경의 설정 전원 패널에서 여러 전원 프로필 간에 전환할 수 있습니다. power 프로필은 선택한 목표에 맞게 다양한 시스템 설정을 최적화합니다.
다음과 같은 전원 프로필을 사용할 수 있습니다.
- 성능
- 높은 시스템 성능을 위해 최적화되고 배터리 수명이 감소합니다. 이 프로필은 선택한 특정 시스템 구성에서만 사용할 수 있습니다.
- 균형
- 표준 시스템 성능 및 전력 소비를 제공합니다. 기본 프로필입니다.
- 절전 관리
- 배터리 수명 증가 및 시스템 성능 감소. 이 프로필은 낮은 배터리에서 자동으로 활성화됩니다.
전원 프로파일 구성은 시스템 재부팅 후에도 유지됩니다.
power 프로필 기능은 기본적으로 설치된 power-profiles-daemon
패키지에서 사용할 수 있습니다.
경량 단일 애플리케이션 환경
단일 애플리케이션만 제공하는 그래픽 사용 사례의 경우 이제 UI(Lightweight User Interface)를 사용할 수 있습니다.
키오스크 모드라고도 하는 단일 애플리케이션 세션에서 GNOME을 시작할 수 있습니다. 이 세션에서 GNOME은 구성한 애플리케이션의 전체 화면 창만 표시합니다.
단일 애플리케이션 세션은 표준 GNOME 세션보다 훨씬 적은 리소스 집약적입니다.
자세한 내용은 세션 제한을 단일 애플리케이션으로 제한을 참조하십시오.
언어 지원은 이제 langpacks에서 제공합니다.
이제 langpack
패키지에서 다양한 언어에 대한 지원을 사용할 수 있습니다. 다음 패키지 이름을 사용하여 설치할 언어 지원 수준을 사용자 지정할 수 있습니다. 여기서 code
는 스페인어 es
와 같이 언어의 짧은 ISO 코드입니다.
langpacks-core-code
다음을 포함하여 기본 언어 지원을 제공합니다.
-
glibc
locale - 기본 글꼴
- 언어에 필요한 기본 입력 방법
-
langpacks-core-font-code
- 언어의 기본 글꼴만 제공합니다.
langpacks-code
기본 언어 지원 외에도 다음과 같은 전체 언어 지원을 제공합니다.
- 번역
- 맞춤 검사기 사전
- 추가 글꼴
motif가 더 이상 사용되지 않음
업스트림 Motif 커뮤니티의 개발이 비활성 상태이기 때문에 RHEL에서 Motif 위젯 툴킷이 더 이상 사용되지 않습니다.
개발 및 디버깅 변형을 포함하여 다음 Motif 패키지가 더 이상 사용되지 않습니다.
-
motif
-
openmotif
-
openmotif21
-
openmotif22
또한 motif-static
패키지가 제거되었습니다.
GTK 툴킷을 대체로 사용하는 것이 좋습니다. GTK는 유지 관리가 용이하며 Motif와 비교하여 새로운 기능을 제공합니다.
여러 비트맵 글꼴이 제거되었습니다.
다음 비트맵 글꼴 패키지가 제거되었습니다.
-
bitmap-console-fonts
-
비트맵-fixed-fonts
-
bitmap-fonts-compat
-
bitmap-lucida-typewriter-fonts
Red Hat은 비트맵의 크기가 제한되어 있기 때문에 이러한 글꼴을 제거하기로 결정했습니다. 사용할 수 없는 글꼴 크기를 설정하려고 하면 텍스트가 다른 크기 또는 다른 글꼴로 표시될 수 있습니다. 또한 비트맵 글꼴의 렌더링 품질을 줄이고 사용자 환경을 방해합니다.
또한 fontconfig
시스템은 언어 범위를 추정하는 메타데이터가 없으므로 주요 비트맵 글꼴 형식 중 하나인 PCF (Portable Compiled Format)를 무시합니다.
비트맵-fangsongti-fonts
비트맵 글꼴 패키지는 Lorax 도구를 지원하기 위해 계속 사용할 수 있습니다.
로그인 화면에 로그인 버튼 없음
이 릴리스에서는 로그인 화면이 다시 설계되었습니다. 결과적으로 로그인 화면에는 이전 RHEL 릴리스에 존재했던 Sign In 버튼이 더 이상 포함되지 않습니다.
암호를 확인하려면 대신 Enter 키를 누릅니다.
로그인 옵션 버튼(예:)이 이제 화면 오른쪽 아래에 있습니다.
23장. edge
다음 장에서는 RHEL 8과 RHEL 9 간의 RHEL Edge에 대한 주요 변경 사항을 설명합니다.
23.1. Edge용 RHEL
이 버전에서는 이전 버전에 비해 다음과 같은 향상된 기능이 도입되었습니다.
RHEL for Edge AMI 이미지 빌드 지원
RHEL for Edge에 대한 .ami
이미지를 빌드하고, Ignition으로 블루프린트를 사용자 지정하여 부팅 중에 이미지에 인증 정보를 삽입하고, .ami
이미지를 AWS에 업로드하고 AWS에서 EC2 인스턴스를 부팅할 수 있습니다.
RHEL for Edge VMDK 이미지 빌드 지원
RHEL for Edge VMDK 이미지를 위해 RHEL을 빌드하고, Ignition으로 블루프린트를 사용자 지정하여 초기 부팅 중에 이미지에 인증 정보를 삽입한 다음 vSphere에서 이미지를 로드하고 VM vSphere에서 이미지를 부팅할 수도 있습니다.
64비트 ARM 아키텍처에서 부팅되는 RHEL for Edge 최소 원시 이미지 지원
RHEL for Edge 최소 원시 이미지 유형은 이제 64비트 ARM 아키텍처 및 AMD 및 Intel 64비트 아키텍처를 지원합니다.
새로운 FIDO 장치 온보딩 서버 컨테이너 이미지 사용 가능
다음 FIDO 장치 온보딩 서버 컨테이너 이미지는 Red Hat Container Catalog 에서 사용할 수 있습니다.
-
rhel9/fdo-manufacturing-server
-
rhel9/fdo-owner-onboarding-server
-
rhel9/fdo-rendezvous-server
-
rhel9/fdo-serviceinfo-api-server
Edge Simplified 이미지용 RHEL은 Ignition 프로비저닝 유틸리티를 지원합니다.
에지 이미지에 대한 RHEL을 생성하기 위해 Ignition 프로비저닝 유틸리티로 청사진 구성을 사용자 지정할 수 있습니다. Ignition은 부팅 프로세스의 초기 단계에서 사용자 구성을 이미지에 삽입합니다. 시스템에서 처음 부팅되는 동안 Ignition 유틸리티는 원격 URL 또는 Simplified Installer 이미지에 포함된 파일에서 구성을 읽고 해당 구성을 이미지에 적용합니다.
청사진의 FDO 사용자 지정이 선택 사항입니다.
더 이상 단순화된 설치 관리자 이미지를 빌드하기 위해 FDO 사용자 지정 섹션을 청사진에 추가할 필요가 없습니다.
다음 이미지의 사용자 구성에서 직접 사용자 구성을 지정할 수 있도록 지원합니다.
- 간소화된 설치 관리자 이미지
- FDO 이미지
- Ignition 이미지
- RHEL 이미지 빌더 GUI를 사용하여 RHEL for Edge Simplified 설치 프로그램 이미지를 생성할 수 있습니다.
이전에는 명령줄 인터페이스를 사용하여만 Simplified Installer 이미지를 생성할 수 있었습니다.
FDO를 사용하여 Edge 이미지에 대한 자동 프로비저닝 및 온보딩 지원
FDO(FIDO 장치 온보딩) 프로세스를 사용하여 에지 이미지의 자동 프로비저닝 및 온보딩 RHEL을 지원합니다. 이를 통해 Edge Simplified Installer 이미지를 위한 RHEL을 빌드하고 Edge 이미지의 RHEL에 프로비저닝할 수 있습니다. 그런 다음 FDO 프로세스를 사용하여 자동으로 Edge 장치를 프로비저닝하고 온보드하고, 네트워크에 연결된 다른 장치 및 시스템과 데이터를 교환할 수 있습니다.
RHEL 8에서 RHEL 9로 rpm-ostree
업그레이드 지원
rpm-ostree rebase
를 사용하여 RHEL 8 시스템을 RHEL 9로 업그레이드할 수 있습니다.
자동 롤백 지원
부팅 프로세스 중에 상태 점검이 실행되고 노드가 올바르게 작동하는지 확인할 수 있습니다. 상태 점검이 실패하면 카운터에서 시도 횟수를 추적하고 노드에서 rpm-ostree
를 사용하여 업데이트를 롤백합니다. 업데이트가 실패할 때 새 애플리케이션 버전이 종료되면 podman에서 컨테이너를 자동으로 롤백합니다.
Edge Simplified 설치 프로그램 이미지용 RHEL 빌드 지원
RHEL 이미지 빌더를 사용하여 RHEL for Edge Simplified 설치 프로그램 이미지를 빌드할 수 있습니다. 장치에 역추적 설치를 수행하고 Edge 이미지의 RHEL에 이미지를 프로비저닝할 수 있습니다.
Edge Raw 이미지용 RHEL 빌드 지원
Edge Raw 이미지용 RHEL 을 빌드할 수도 있습니다. 이는 압축된 원시 이미지로, 기존 배포된 OSTree
커밋이 포함된 파티션 레이아웃이 포함된 파일로 구성됩니다. 엣지 원시 이미지용 RHEL은 하드 디스크 드라이브에서 충돌하거나 가상 머신에서 부팅하는 데 사용할 수 있습니다.
Edge 최소 설치 용 RHEL 9는 훨씬 작습니다.
Edge 최소 설치용 RHEL 9는 RHEL 8과 비교할 때 훨씬 작습니다.
최소 RHEL 8 설치 | 최소 RHEL 9 설치 | 최소 RHEL 9 설치 ( 펌웨어 및 Podman 포함) |
---|---|---|
302 RPM | 244 RPM | 292 RPM |
1.1G 디스크 | 652m 디스크 | 863m 디스크 |
에지 이미지 유형에서 지원되는 RHEL
RHEL for Edge를 사용하면 RHEL 이미지 빌더를 사용하여 사용자 지정 RHEL(rpm-ostree) 이미지를 작성한 다음 에지 서버에 이미지를 원격으로 설치 및 관리할 수 있습니다.
RHEL 9에서 지원되는 이미지 유형은 다음과 같습니다.
- 에지 커밋용 RHEL(.tar)
- 에지 컨테이너 용 RHEL (.tar)
- 에지 설치 프로그램용 RHEL(.iso)
- RHEL for Edge Raw Image (.raw.xz)
- Edge Simplified Installer(.iso)용 RHEL
에지 이미지 이름에서 지원되는 RHEL
이전에는 이미지 유형 앞에 rhel-가 추가되었습니다
. 이 접두사가 제거되었지만 rhel-edge- container 및
와 같은 이전 이미지 이름은 새 이름의 별칭으로 계속 작동합니다. 이러한 이름은 더 이상 사용되지 않는 것으로 간주되며 향후 버전에서 완전히 제거될 수 있습니다. RHEL 9에서 다음 RHEL for Edge 이미지 이름이 지원됩니다.
rhel-edge-
installer
- edge-commit
- edge-container
- edge-installer
24장. 성능
다음 장에서는 RHEL 8과 RHEL 9 간의 성능에 대한 주요 변경 사항을 설명합니다.
24.1. 성능 관련 주요 변경 사항
Performance Co-Pilot의 버전 6.0을 기반으로 재조정
RHEL 9.2부터PCP
( Performance Co-Pilot )가 버전 6.0으로 업데이트되었습니다. 주요 개선사항은 다음과 같습니다.
버전 3 PCP 아카이브 지원:
여기에는 인스턴스 도메인 change-deltas, Y2038 안전 타임스탬프, 나노초-지정 타임스탬프, 임의의 시간대 지원, 대규모 2GB의 개별 볼륨에 사용되는 64비트 파일 오프셋 지원이 포함됩니다.
이 기능은 현재
/etc/pcp.conf
파일의PCP_ARCHIVE_VERSION
설정을 통해 옵트인합니다.버전 2 아카이브는 그대로 유지됩니다.
PCP 전체에서 OpenSSL만 사용됩니다. Mozilla NSS/NSPR 사용이 중단되었습니다.
이는
libpcp
,PMAPI
클라이언트 및PMCD
암호화 사용에 영향을 미칩니다. 이러한 요소는 이제 이미 OpenSSL을 사용하고 있는pmproxy
HTTPS 지원 및redis-server
와 함께 설정 및 사용됩니다.새로운 나노초 전체 타임스탬프
PMAPI
는 타임스탬프를 사용하는PCP
라이브러리 인터페이스에 대한 호출입니다.이는 모두 선택 사항이며 기존 툴에는 전체 이전 버전과의 호환성이 유지됩니다.
다음 툴과 서비스가 업데이트되었습니다.
pcp2elasticsearch
- 인증 지원을 구현합니다.
pcp-dstat
-
최상위 플러그인에 대한 지원을 구현합니다
. pcp-htop
- 안정적인 최신 업스트림 릴리스로 업데이트되었습니다.
PMseries
-
합계
,avg
,stdev
,nth_percentile
,max_inst
,max_sample
,min_inst
및min_sample
함수가 추가되었습니다. pmdabpf
- 추가 CO-RE (Compile Once - Run Everywhere) 모듈 및 AMD64, Intel 64 비트, 64 비트 ARM 및 IBM Power Systems에 대한 지원
pmdabpftrace
-
예제 자동 시작 스크립트를
/usr/share
디렉터리로 이동했습니다. pmdadenki
- 여러 활성 건전지에 대한 지원이 추가되었습니다.
pmdalinux
-
최신
/proc/net/netstat
변경 사항 업데이트 pmdaopenvswitch
- 추가 인터페이스 및 범위 통계가 추가되었습니다.
pmproxy
- 요청 매개변수는 이제 요청 본문으로 보낼 수 있습니다.
pmieconf
-
Open vSwitch 메트릭에 대한 몇 가지
pmie
규칙이 추가되었습니다. pmlogger_farm
- ball loggers에 대한 기본 구성 파일이 추가되었습니다.
pmlogger_daily_report
- 몇 가지 주요 효율성 개선.
RHEL 9부터는 RuntimeClass 패키지에서 제공하는ious f(1) 도구가 기본
아카이브에서 PCP 아카이브를 생성할 수 있습니다. 슬픈
c(1)
기본적으로 -
플래그가 gr c(1)
와 함께 사용되는 경우 so c(1)
는 표준 시스템 활동 매일 데이터 파일에 데이터를 씁니다. 이 파일의 이름은 saDD
이며 기본적으로 /var/log/sa
디렉터리에 있습니다. 반대로, 입력 datafile이 지정되지 않은 경우, sign f(1)
도구는 매일 데이터 파일을 사용하여 아카이브를 생성합니다. 숫자를 인수로 전달하여 과거에 지정된 일
수를 기록한 데이터에서 아카이브를 생성하도록 합니다.
2일 전 기록된 disc
(1) 아카이브
에서 PCP 아카이브를 생성하려면 다음을 실행합니다.# sadf -l -O pcparchive=/tmp/recording -2
ious
c(1)
아카이브에서 생성된 PCP 아카이브에 지표 목록을 표시하려면 다음을 실행합니다.$ pminfo --archive /tmp/recording Disk.dev.avactive Disk.dev.read Disk.dev.write Disk.dev.blkread [...]
poor
c(1)
아카이브에서 생성된 PCP 아카이브의 시간 공간 및 호스트 이름을 표시하려면 다음을 수행합니다.$ pmdumplog --label /tmp/recording Log Label (Log Format Version 2) Performance metrics from host shard commencing Tue Jul 20 00:10:30.642477 2021 ending Wed Jul 21 00:10:30.222176 2021
그런 다음 PCP 명령을 사용하여 paste
c(1)
아카이브에서 생성된 PCP 아카이브를 분석할 수 있습니다. 예를 들면 다음과 같습니다.$ pmchart --archive /tmp/recording
새로운 PCP PMDA - pmdabpf
RHEL 9는 pcp-pmda-bpf
패키지를 통해 배포됩니다. 이 패키지는 pmdabpf
Performance Co-2011(PCP) Performance Metric Domain Agent(PMDA)를 제공합니다.
pmdabpf
PMDA는 libbpf
및 BTF
인 BPF CO-RE
( compile Once - Run Everywhere)를 사용하여 eBPF
프로그램에서 라이브 성능 데이터를 추출합니다.
25장. 시스템 역할
다음 장에서는 RHEL 8과 RHEL 9 간의 시스템 역할에 대한 주요 변경 사항을 설명합니다.
25.1. RHEL 시스템 역할을 사용하여 시스템 관리 작업 수행
Red Hat Enterprise Linux 9.0 GA(General Availability) 릴리스부터 RHEL 시스템 역할에는 ansible-core 2.12
패키지가 포함되어 있습니다. 이는 핵심 기능만 있는 Ansible 버전입니다. 즉, 스토리지
역할의 blivet
, 네트워크
역할의 gobject
, json_query
와 같은 플러그인과 같은 모듈이 포함되지 않습니다.
RHEL 시스템 역할을 사용하면 구성 인터페이스를 활용하여 여러 RHEL 시스템을 원격으로 관리할 수 있습니다. 기존 RHEL 시스템 역할 형식에 대한 옵션으로 Ansible Automation Platform 고객 또는 RHEL 사용자가 사용할 수 있는 RPM
패키지에 대해서만 Automation Hub 에서 사용할 수 있는 Ansible 컬렉션의 이점을 활용할 수 있습니다.
RHEL 시스템 역할 지원
다음 역할에 대한 지원을 사용할 수 있습니다.
-
cockpit
RHEL 시스템 역할. 웹 콘솔의 배포 및 구성을 자동화하여 웹 브라우저에서 RHEL 시스템을 관리할 수 있습니다. -
방화벽
RHEL 시스템 역할. -
이전에 기술 프리뷰로 제공된
ha_cluster
RHEL 시스템 역할이 이제 완전히 지원됩니다. -
nbde_client
RHEL 시스템 역할은 이제 고정 IP 주소가 있는 서버를 지원합니다. -
Microsoft SQL(Microsoft SQL Server용 Microsoft SQL
.sql.server
) 역할입니다. MSSQL Server 워크로드에 권장되는 설정으로 RHEL 구성을 단순화하고 자동화합니다. 현재 SQL Server는 RHEL 9에서 실행을 지원하지 않습니다. RHEL 9 제어 노드에서만 역할을 실행하여 RHEL 7 및 RHEL 8의 SQL Server를 관리할 수 있습니다. -
Red Hat Ansible Automation Platform을 사용하여 RHEL 시스템에서
VPN
연결을 구성하는 VPN RHEL 시스템 역할. 사용자는 이를 사용하여 호스트, 네트워크 네트워크, VPN 원격 액세스 서버 및 메시 구성을 설정할 수 있습니다. -
rhel_
tekton Collection에서 사용 가능한 하드웨어 관리 인터페이스를 자동화하는IPMI
모듈.
RHEL 시스템 역할에 대한 자세한 내용은 RHEL에서 시스템 역할을 사용하여 문서 제목 관리 및 구성 작업을 참조하십시오.
Ansible Engine 2.9에 대한 지원은 RHEL 9에서 더 이상 제공되지 않음
Ansible Engine 2.9
는 Red Hat Enterprise Linux 9에서 더 이상 제공되지 않습니다. 이전에 Ansible Engine 2.9
에서 실행된 플레이북에서는 누락된 플러그인 또는 모듈과 관련된 오류 메시지를 생성할 수 있습니다. Ansible의 사용 사례가 RHEL에서 제공되는 Ansible Core에 대한 제한된 지원 범위를 벗어나는 경우 Red Hat에 문의하여 사용 가능한 서비스에 대해 논의하십시오.
RHEL 시스템 역할에서 Ansible Core 사용
RHEL 9 General Availability 릴리스에서 Ansible Core
는 RHEL을 지원하는 자동화 사용 사례를 지원하기 위해 제한된 지원 범위를 제공합니다. Ansible Core
는 RHEL용 AppStream 리포지토리에서 사용할 수 있습니다. 지원 범위에 대한 자세한 내용은 RHEL 9 AppStream에 포함된 Ansible Core 패키지에 대한 지원 범위를 참조하십시오.
Red Hat Enterprise Linux 9.0부터 RHEL AppStream의 Ansible Core 지원 범위는 RHEL 시스템 역할과 같은 Red Hat 제품에 의해 포함되거나 생성되는 모든 Ansible 플레이북, 역할 및 모듈로 제한됩니다.
subscription-manager register
명령의 더 이상 사용되지 않는 --token
옵션은 2024년 11월 말에 작동을 중지합니다.
기본 인타이틀먼트 서버 subscription.rhsm.redhat.com
은 더 이상 2024년 11월 말부터 토큰 기반 인증을 허용하지 않습니다. 결과적으로 subscription-manager register
명령의 더 이상 사용되지 않는 --token=<TOKEN
> 옵션이 더 이상 지원되는 인증 방법이 아닙니다. 결과적으로 subscription-manager register --token=<TOKEN
> 을 사용하는 경우 다음 오류 메시지와 함께 등록이 실패합니다.
Token authentication not supported by the entitlement server
시스템을 등록하려면 subscription-manager register
명령에 --username / --password
OR --org / --activationkey
를 포함하여 지원되는 다른 권한 부여 방법을 사용하십시오.
RHEL 시스템 역할을 사용하여 여러 버전의 RHEL을 관리할 수 있습니다.
RHEL 시스템 역할을 일관된 인터페이스로 사용하여 다른 버전의 RHEL을 관리할 수 있습니다. 이를 통해 RHEL의 주요 버전 간 전환을 쉽게 수행할 수 있습니다.
부록 A. 패키지 변경
다음 장에서는 RHEL 8과 RHEL 9 간의 패키지 변경 사항 및 RHEL 9의 마이너 릴리스 간 변경 사항이 포함되어 있습니다.
A.1. 새 패키지
다음 패키지는 RHEL 9에 추가되었습니다.
패키지 | 리포지터리 | 새로운 기능 |
---|---|---|
389-DS-base-devel | rhel9-CRB | RHEL 9.3 |
a52dec | rhel9-AppStream | RHEL 9.0 |
adobe-source-code-pro-fonts | rhel9-AppStream | RHEL 9.1 |
afterburn | rhel9-AppStream | RHEL 9.0 |
afterburn-dracut | rhel9-AppStream | RHEL 9.0 |
alsa-plugins-pulseaudio | rhel9-AppStream | RHEL 9.1 |
alternatives | rhel9-BaseOS | RHEL 9.0 |
anaconda-install-img-deps | rhel9-AppStream | RHEL 9.0 |
anaconda-widgets-devel | rhel9-CRB | RHEL 9.1 |
ant-junit5 | rhel9-AppStream | RHEL 9.0 |
Anthy-unicode | rhel9-AppStream | RHEL 9.0 |
A read-unicode-devel | rhel9-CRB | RHEL 9.1 |
appstream | rhel9-AppStream | RHEL 9.0 |
appstream-compose | rhel9-CRB | RHEL 9.0 |
appstream-compose-devel | rhel9-CRB | RHEL 9.0 |
appstream-devel | rhel9-CRB | RHEL 9.0 |
appstream-qt | rhel9-CRB | RHEL 9.0 |
appstream-qt-devel | rhel9-CRB | RHEL 9.0 |
aspnetcore-runtime-7.0 | rhel9-AppStream | RHEL 9.1 |
aspnetcore-targeting-pack-7.0 | rhel9-AppStream | RHEL 9.1 |
autocorr-dsb | rhel9-AppStream | RHEL 9.0 |
autocorr-el | rhel9-AppStream | RHEL 9.0 |
autocorr-hsb | rhel9-AppStream | RHEL 9.0 |
autocorr-vro | rhel9-AppStream | RHEL 9.0 |
avahi-glib-devel | rhel9-CRB | RHEL 9.3 |
avahi-tools | rhel9-AppStream | RHEL 9.3 |
Babel-doc | rhel9-CRB | RHEL 9.0 |
bind-dnssec-doc | rhel9-AppStream | RHEL 9.0 |
bind-dnssec-utils | rhel9-AppStream | RHEL 9.0 |
bind-doc | rhel9-CRB | RHEL 9.1 |
binutils-gold | rhel9-BaseOS | RHEL 9.0 |
blas64 | rhel9-CRB | RHEL 9.3 |
blas64_ | rhel9-CRB | RHEL 9.0 |
bmc-snmp-proxy | rhel9-AppStream | RHEL 9.0 |
boost-b2 | rhel9-CRB | RHEL 9.0 |
boost-contract | rhel9-AppStream | RHEL 9.0 |
boost-doctools | rhel9-CRB | RHEL 9.0 |
boost-json | rhel9-AppStream | RHEL 9.0 |
boost-nowide | rhel9-AppStream | RHEL 9.0 |
bootupd | rhel9-AppStream | RHEL 9.0 |
Box2D | rhel9-AppStream | RHEL 9.0 |
Butane | rhel9-AppStream | RHEL 9.0 |
byte-buddy | rhel9-AppStream | RHEL 9.0 |
byte-buddy-agent | rhel9-CRB | RHEL 9.0 |
byteman-bmunit | rhel9-AppStream | RHEL 9.0 |
catatonit | rhel9-CRB | RHEL 9.1 |
capstone | rhel9-AppStream | RHEL 9.2 |
capstone-devel | rhel9-CRB | RHEL 9.2 |
capstone-java | rhel9-CRB | RHEL 9.2 |
cdrskin | rhel9-AppStream | RHEL 9.0 |
cifs-utils-devel | rhel9-CRB | RHEL 9.2 |
cldr-emoji-annotation-dtd | rhel9-AppStream | RHEL 9.0 |
clevis-pin-tpm2 | rhel9-AppStream | RHEL 9.0 |
Cockpit-ostree | rhel9-AppStream | RHEL 9.3 |
compat-hesiod | rhel9-AppStream | RHEL 9.0 |
compat-openssl11 | rhel9-AppStream | RHEL 9.0 |
compat-paratype-pt-sans-fonts-f33-f34 | rhel9-AppStream | RHEL 9.0 |
compat-sap-c++-12 | rhel9-SAP | RHEL 9.2 |
console-login-helper-messages | rhel9-AppStream | RHEL 9.0 |
console-login-helper-messages-issuegen | rhel9-AppStream | RHEL 9.0 |
console-login-helper-messages-motdgen | rhel9-AppStream | RHEL 9.0 |
console-login-helper-messages-profile | rhel9-AppStream | RHEL 9.0 |
console-setup | rhel9-AppStream | RHEL 9.0 |
container-tools | rhel9-AppStream | RHEL 9.0 |
cups-printerapp | rhel9-AppStream | RHEL 9.0 |
curl-minimal | rhel9-BaseOS | RHEL 9.0 |
cxl-cli | rhel9-AppStream | RHEL 9.2 |
CXL-devel | rhel9-CRB | RHEL 9.2 |
cxl-libs | rhel9-AppStream | RHEL 9.2 |
cyrus-imapd-libs | rhel9-AppStream | RHEL 9.0 |
dbus-broker | rhel9-BaseOS | RHEL 9.0 |
ddiskit | rhel9-AppStream | RHEL 9.0 |
debugedit | rhel9-AppStream | RHEL 9.0 |
dejavu-lgc-sans-mono-fonts | rhel9-AppStream | RHEL 9.0 |
dejavu-lgc-serif-fonts | rhel9-AppStream | RHEL 9.0 |
docbook5-style-xsl | rhel9-AppStream | RHEL 9.0 |
docbook5-style-xsl-extensions | rhel9-AppStream | RHEL 9.0 |
dotnet-apphost-pack-7.0 | rhel9-AppStream | RHEL 9.1 |
dotnet-hostfxr-7.0 | rhel9-AppStream | RHEL 9.1 |
dotnet-runtime-7.0 | rhel9-AppStream | RHEL 9.1 |
dotnet-sdk-7.0 | rhel9-AppStream | RHEL 9.1 |
dotnet-sdk-7.0-source-built-artifacts | rhel9-CRB | RHEL 9.1 |
dotnet-targeting-pack-7.0 | rhel9-AppStream | RHEL 9.1 |
dotnet-templates-7.0 | rhel9-AppStream | RHEL 9.1 |
double-conversion | rhel9-AppStream | RHEL 9.0 |
double-conversion-devel | rhel9-CRB | RHEL 9.1 |
ecj | rhel9-AppStream | RHEL 9.2 |
edk2-tools | rhel9-CRB | RHEL 9.2 |
edk2-tools-doc | rhel9-CRB | RHEL 9.2 |
egl-utils | rhel9-AppStream | RHEL 9.1 |
emacs-auctex | rhel9-AppStream | RHEL 9.0 |
emacs-cython-mode | rhel9-CRB | RHEL 9.0 |
espeak-ng-devel | rhel9-CRB | RHEL 9.3 |
evince-previewer | rhel9-AppStream | RHEL 9.0 |
evince-thumbnailer | rhel9-AppStream | RHEL 9.0 |
exfatprogs | rhel9-BaseOS | RHEL 9.0 |
fapolicyd-dnf-plugin | rhel9-AppStream | RHEL 9.0 |
fdk-aac-free | rhel9-AppStream | RHEL 9.0 |
fdk-aac-free-devel | rhel9-CRB | RHEL 9.1 |
fence-agents-openstack | rhel9 HighAvailability | RHEL 9.0 |
페스티벌 | rhel9-AppStream | RHEL 9.0 |
festival-data | rhel9-AppStream | RHEL 9.0 |
festvox-slt-arctic-hts | rhel9-AppStream | RHEL 9.0 |
fio-engine-dev-dax | rhel9-AppStream | RHEL 9.0 |
fio-engine-http | rhel9-AppStream | RHEL 9.0 |
fio-engine-libaio | rhel9-AppStream | RHEL 9.0 |
fio-engine-libpmem | rhel9-AppStream | RHEL 9.0 |
fio-engine-nbd | rhel9-AppStream | RHEL 9.0 |
fio-engine-pmemblk | rhel9-AppStream | RHEL 9.0 |
fio-engine-rados | rhel9-AppStream | RHEL 9.0 |
fio-engine-rbd | rhel9-AppStream | RHEL 9.0 |
fio-engine-rdma | rhel9-AppStream | RHEL 9.0 |
firefox-x11 | rhel9-AppStream | RHEL 9.2 |
Flashrom | rhel9-AppStream | RHEL 9.0 |
flexiblas | rhel9-AppStream | RHEL 9.0 |
flexiblas-devel | rhel9-CRB | RHEL 9.0 |
flexiblas-netlib | rhel9-AppStream | RHEL 9.0 |
flexiblas-netlib64 | rhel9-CRB | RHEL 9.0 |
flexiblas-openblas-openmp | rhel9-AppStream | RHEL 9.0 |
flexiblas-openblas-openmp64 | rhel9-CRB | RHEL 9.0 |
fonts-filesystem | rhel9-BaseOS | RHEL 9.0 |
fonts-rpm-macros | rhel9-CRB | RHEL 9.0 |
fonts-srpm-macros | rhel9-AppStream | RHEL 9.0 |
freeglut-devel | rhel9-AppStream | RHEL 9.1 |
freeradius-mysql | rhel9-CRB | RHEL 9.2 |
freeradius-perl | rhel9-CRB | RHEL 9.2 |
freeradius-postgresql | rhel9-CRB | RHEL 9.2 |
freeradius-rest | rhel9-CRB | RHEL 9.2 |
freeradius-sqlite | rhel9-CRB | RHEL 9.2 |
freeradius-unixODBC | rhel9-CRB | RHEL 9.2 |
frr-selinux | rhel9-AppStream | RHEL 9.2 |
fstrm-utils | rhel9-CRB | RHEL 9.0 |
fwupd-plugin-flashrom | rhel9-AppStream | RHEL 9.0 |
gawk-all-langpacks | rhel9-AppStream | RHEL 9.0 |
gcc-plugin-annobin | rhel9-AppStream | RHEL 9.0 |
gcc-toolset-12 | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-annobin-annocheck | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-annobin-docs | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-annobin-plugin-gcc | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-binutils | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-binutils-devel | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-binutils-gold | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-build | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-dwz | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-gcc | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-gcc-c++ | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-gcc-gfortran | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-gcc-plugin-annobin | rhel9-AppStream | RHEL 9.2 |
gcc-toolset-12-gcc-plugin-devel | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-gdb | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-libasan-devel | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-libatomic-devel | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-libgccjit | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-libgccjit-devel | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-libgccjit-docs | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-libitm-devel | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-liblsan-devel | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-libquadmath-devel | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-libstdc++-devel | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-libstdc++-docs | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-libtsan-devel | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-libubsan-devel | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-offload-nvptx | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-12-runtime | rhel9-AppStream | RHEL 9.1 |
gcc-toolset-13 | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-annobin-annocheck | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-annobin-docs | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-annobin-plugin-gcc | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-binutils | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-binutils-devel | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-binutils-gold | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-dwz | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-gcc | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-gcc-c++ | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-gcc-gfortran | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-gcc-plugin-annobin | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-gcc-plugin-devel | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-gdb | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-libasan-devel | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-libatomic-devel | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-libgccjit | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-libgccjit-devel | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-libitm-devel | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-liblsan-devel | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-libquadmath-devel | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-libstdc++-devel | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-libstdc++-docs | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-libtsan-devel | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-libubsan-devel | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-offload-nvptx | rhel9-AppStream | RHEL 9.3 |
gcc-toolset-13-runtime | rhel9-AppStream | RHEL 9.3 |
gcr-base | rhel9-AppStream | RHEL 9.0 |
gdb-minimal | rhel9-AppStream | RHEL 9.0 |
gedit-plugin-sessionsaver | rhel9-AppStream | RHEL 9.0 |
gedit-plugin-synctex | rhel9-AppStream | RHEL 9.0 |
gegl04-devel-docs | rhel9-AppStream | RHEL 9.0 |
gegl04-tools | rhel9-AppStream | RHEL 9.0 |
Glade | rhel9-AppStream | RHEL 9.0 |
glibc-doc | rhel9-AppStream | RHEL 9.0 |
glibc-langpack-ckb | rhel9-BaseOS | RHEL 9.0 |
glibc-langpack-mnw | rhel9-BaseOS | RHEL 9.0 |
glslang | rhel9-AppStream | RHEL 9.0 |
glslang-devel | rhel9-CRB | RHEL 9.1 |
glslc | rhel9-AppStream | RHEL 9.0 |
glusterfs-cloudsync-plugins | rhel9-AppStream | RHEL 9.0 |
gnome-connections | rhel9-AppStream | RHEL 9.0 |
gnome-devel-docs | rhel9-AppStream | RHEL 9.0 |
gnome-extensions-app | rhel9-AppStream | RHEL 9.0 |
gnome-kiosk | rhel9-AppStream | RHEL 9.0 |
gnome-kiosk-script-session | rhel9-AppStream | RHEL 9.1 |
gnome-kiosk-search-appliance | rhel9-AppStream | RHEL 9.1 |
gnome-shell-extension-background-logo | rhel9-AppStream | RHEL 9.0 |
gnome-shell-extension-custom-menu | rhel9-AppStream | RHEL 9.3 |
gnome-software-devel | rhel9-CRB | RHEL 9.3 |
gnome-themes-extra | rhel9-AppStream | RHEL 9.0 |
gnome-tour | rhel9-AppStream | RHEL 9.0 |
gnu-efi-compat | rhel9-CRB | RHEL 9.0 |
go-filesystem | rhel9-AppStream | RHEL 9.0 |
go-rpm-macros | rhel9-AppStream | RHEL 9.0 |
go-rpm-templates | rhel9-AppStream | RHEL 9.0 |
golang-github-cpuguy83-md2man | rhel9-CRB | RHEL 9.2 |
google-carlito-fonts | rhel9-AppStream | RHEL 9.0 |
google-crosextra-caladea-fonts | rhel9-AppStream | RHEL 9.3 |
google-noto-sans-mono-fonts | rhel9-AppStream | RHEL 9.0 |
google-noto-sans-sinhala-vf-fonts | rhel9-AppStream | RHEL 9.0 |
google-noto-sans-symbols2-fonts | rhel9-CRB | RHEL 9.1 |
google-noto-serif-gurmukhi-vf-fonts | rhel9-AppStream | RHEL 9.0 |
google-noto-serif-sinhala-vf-fonts | rhel9-AppStream | RHEL 9.0 |
gpsd-minimal | rhel9-AppStream | RHEL 9.3 |
gpsd-minimal-clients | rhel9-AppStream | RHEL 9.3 |
graphene | rhel9-AppStream | RHEL 9.0 |
graphene-devel | rhel9-AppStream | RHEL 9.0 |
gstreamer1-plugins-base-tools | rhel9-AppStream | RHEL 9.2 |
gstreamer1-rtsp-server | rhel9-AppStream | RHEL 9.3 |
gtk3-devel-docs | rhel9-CRB | RHEL 9.1 |
gtk4 | rhel9-AppStream | RHEL 9.0 |
gtk4-devel | rhel9-AppStream | RHEL 9.0 |
gtksourceview4 | rhel9-AppStream | RHEL 9.0 |
gtksourceview4-devel | rhel9-CRB | RHEL 9.1 |
guestfs-tools | rhel9-AppStream | RHEL 9.0 |
ha-cloud-support | rhel9 HighAvailability | RHEL 9.0 |
ha-openstack-support | rhel9-AppStream | RHEL 9.0 |
highcontrast-icon-theme | rhel9-AppStream | RHEL 9.0 |
hivex-libs | rhel9-AppStream | RHEL 9.0 |
HT-caladea-fonts | rhel9-AppStream | RHEL 9.0 |
httpd-core | rhel9-AppStream | RHEL 9.1 |
hunspell-filesystem | rhel9-AppStream | RHEL 9.0 |
hwdata-devel | rhel9-CRB | RHEL 9.3 |
하이픈-eo | rhel9-AppStream | RHEL 9.0 |
ibus-anthy | rhel9-AppStream | RHEL 9.0 |
ibus-anthy-python | rhel9-AppStream | RHEL 9.0 |
idm-jss | rhel9-AppStream | RHEL 9.1 |
idm-ldapjdk | rhel9-AppStream | RHEL 9.1 |
idm-pki-acme | rhel9-AppStream | RHEL 9.1 |
idm-pki-base | rhel9-AppStream | RHEL 9.1 |
idm-pki-ca | rhel9-AppStream | RHEL 9.1 |
idm-pki-est | rhel9-AppStream | RHEL 9.2 |
idm-pki-java | rhel9-AppStream | RHEL 9.1 |
idm-pki-kra | rhel9-AppStream | RHEL 9.1 |
idm-pki-server | rhel9-AppStream | RHEL 9.1 |
idm-pki-tools | rhel9-AppStream | RHEL 9.1 |
idm-tomcatjss | rhel9-AppStream | RHEL 9.1 |
Ignition | rhel9-AppStream | RHEL 9.0 |
ignition-edge | rhel9-AppStream | RHEL 9.2 |
ignition-validate | rhel9-AppStream | RHEL 9.2 |
imath | rhel9-AppStream | RHEL 9.0 |
imath-devel | rhel9-CRB | RHEL 9.0 |
inih | rhel9-BaseOS | RHEL 9.0 |
inih-devel | rhel9-CRB | RHEL 9.1 |
initscripts-rename-device | rhel9-BaseOS | RHEL 9.0 |
initscripts-service | rhel9-BaseOS | RHEL 9.0 |
iptables-nft | rhel9-BaseOS | RHEL 9.0 |
iptables-nft-services | rhel9-AppStream | RHEL 9.0 |
Jakarta-activation | rhel9-AppStream | RHEL 9.0 |
jakarta-activation2 | rhel9-AppStream | RHEL 9.2 |
Jakarta-annotations | rhel9-AppStream | RHEL 9.0 |
자카르타-메일 | rhel9-AppStream | RHEL 9.0 |
jakarta-servlet | rhel9-CRB | RHEL 9.0 |
Jasper | rhel9-AppStream | RHEL 9.0 |
jasper-utils | rhel9-AppStream | RHEL 9.0 |
java-21-openjdk | rhel9-AppStream | RHEL 9.3 |
java-21-openjdk-demo | rhel9-AppStream | RHEL 9.3 |
java-21-openjdk-demo-fastdebug | rhel9-CRB | RHEL 9.3 |
java-21-openjdk-demo-slowdebug | rhel9-CRB | RHEL 9.3 |
java-21-openjdk-devel | rhel9-AppStream | RHEL 9.3 |
java-21-openjdk-devel-fastdebug | rhel9-CRB | RHEL 9.3 |
java-21-openjdk-devel-slowdebug | rhel9-CRB | RHEL 9.3 |
java-21-openjdk-fastdebug | rhel9-CRB | RHEL 9.3 |
java-21-openjdk-headless | rhel9-AppStream | RHEL 9.3 |
java-21-openjdk-headless-fastdebug | rhel9-CRB | RHEL 9.3 |
java-21-openjdk-headless-slowdebug | rhel9-CRB | RHEL 9.3 |
java-21-openjdk-javadoc | rhel9-AppStream | RHEL 9.3 |
java-21-openjdk-javadoc-zip | rhel9-AppStream | RHEL 9.3 |
java-21-openjdk-jmods | rhel9-AppStream | RHEL 9.3 |
java-21-openjdk-jmods-fastdebug | rhel9-CRB | RHEL 9.3 |
java-21-openjdk-jmods-slowdebug | rhel9-CRB | RHEL 9.3 |
java-21-openjdk-slowdebug | rhel9-CRB | RHEL 9.3 |
java-21-openjdk-src | rhel9-AppStream | RHEL 9.3 |
java-21-openjdk-src-fastdebug | rhel9-CRB | RHEL 9.3 |
java-21-openjdk-src-slowdebug | rhel9-CRB | RHEL 9.3 |
java-21-openjdk-static-libs | rhel9-AppStream | RHEL 9.3 |
java-21-openjdk-static-libs-fastdebug | rhel9-CRB | RHEL 9.3 |
java-21-openjdk-static-libs-slowdebug | rhel9-CRB | RHEL 9.3 |
javapackages-generators | rhel9-CRB | RHEL 9.0 |
jaxb-api | rhel9-AppStream | RHEL 9.0 |
jaxb-api4 | rhel9-AppStream | RHEL 9.2 |
jaxb-codemodel | rhel9-AppStream | RHEL 9.2 |
ScanSettingB-core | rhel9-AppStream | RHEL 9.2 |
jaxb-dtd-parser | rhel9-AppStream | RHEL 9.2 |
jaxb-istack-commons-runtime | rhel9-AppStream | RHEL 9.2 |
jaxb-istack-commons-tools | rhel9-AppStream | RHEL 9.2 |
jaxb-relaxng-datatype | rhel9-AppStream | RHEL 9.2 |
jaxb-rngom | rhel9-AppStream | RHEL 9.2 |
ScanSettingB-runtime | rhel9-AppStream | RHEL 9.2 |
jaxb-txw2 | rhel9-AppStream | RHEL 9.2 |
jaxb-xjc | rhel9-AppStream | RHEL 9.2 |
jaxb-xsom | rhel9-AppStream | RHEL 9.2 |
jbigkit | rhel9-AppStream | RHEL 9.0 |
jbig2dec-devel | rhel9-CRB | RHEL 9.2 |
jigawatts-javadoc | rhel9-AppStream | RHEL 9.0 |
jitterentropy | rhel9-BaseOS | RHEL 9.0 |
jitterentropy-devel | rhel9-CRB | RHEL 9.0 |
jmc | rhel9-CRB | RHEL 9.2 |
JNA-contrib | rhel9-AppStream | RHEL 9.0 |
kasumi-common | rhel9-AppStream | RHEL 9.0 |
Kasumi-unicode | rhel9-AppStream | RHEL 9.0 |
kernel-debug-devel-matched | rhel9-AppStream | RHEL 9.0 |
kernel-devel-matched | rhel9-AppStream | RHEL 9.0 |
kernel-debug-modules-core | rhel9-BaseOS | RHEL 9.2 |
kernel-debug-uki-virt | rhel9-BaseOS | RHEL 9.2 |
kernel-modules-core | rhel9-BaseOS | RHEL 9.2 |
kernel-rt-debug-modules-core | rhel9-NFV | RHEL 9.2 |
kernel-rt-modules-core | rhel9-NFV | RHEL 9.2 |
kernel-srpm-macros | rhel9-AppStream | RHEL 9.0 |
kernel-uki-virt | rhel9-BaseOS | RHEL 9.2 |
keylime | rhel9-AppStream | RHEL 9.1 |
keylime-agent-rust | rhel9-AppStream | RHEL 9.1 |
keylime-base | rhel9-AppStream | RHEL 9.1 |
keylime-registrar | rhel9-AppStream | RHEL 9.1 |
keylime-selinux | rhel9-AppStream | RHEL 9.1 |
keylime-tenant | rhel9-AppStream | RHEL 9.1 |
keylime-verifier | rhel9-AppStream | RHEL 9.1 |
khmer-os-battambang-fonts | rhel9-AppStream | RHEL 9.0 |
khmer-os-bokor-fonts | rhel9-AppStream | RHEL 9.0 |
khmer-os-content-fonts | rhel9-AppStream | RHEL 9.0 |
khmer-os-fasthand-fonts | rhel9-AppStream | RHEL 9.0 |
Khmer-os-freehand-fonts | rhel9-AppStream | RHEL 9.0 |
Khmer-os-hand written-fonts | rhel9-AppStream | RHEL 9.0 |
khmer-os-metal-chrieng-fonts | rhel9-AppStream | RHEL 9.0 |
khmer-os-muol-fonts | rhel9-AppStream | RHEL 9.0 |
khmer-os-muol-fonts-all | rhel9-AppStream | RHEL 9.0 |
khmer-os-muol-pali-fonts | rhel9-AppStream | RHEL 9.0 |
khmer-os-siemreap-fonts | rhel9-AppStream | RHEL 9.0 |
khmer-os-system-fonts | rhel9-AppStream | RHEL 9.0 |
ksmtuned | rhel9-AppStream | RHEL 9.0 |
lame | rhel9-AppStream | RHEL 9.0 |
langpacks-bo | rhel9-AppStream | RHEL 9.0 |
langpacks-core-af | rhel9-AppStream | RHEL 9.0 |
langpacks-core-am | rhel9-AppStream | RHEL 9.0 |
langpacks-core-ar | rhel9-AppStream | RHEL 9.0 |
langpacks-core-as | rhel9-AppStream | RHEL 9.0 |
langpacks-core-ast | rhel9-AppStream | RHEL 9.0 |
langpacks-core-be | rhel9-AppStream | RHEL 9.0 |
langpacks-core-bg | rhel9-AppStream | RHEL 9.0 |
langpacks-core-bn | rhel9-AppStream | RHEL 9.0 |
langpacks-core-bo | rhel9-AppStream | RHEL 9.0 |
langpacks-core-br | rhel9-AppStream | RHEL 9.0 |
langpacks-core-bs | rhel9-AppStream | RHEL 9.0 |
langpacks-core-ca | rhel9-AppStream | RHEL 9.0 |
langpacks-core-cs | rhel9-AppStream | RHEL 9.0 |
langpacks-core-cy | rhel9-AppStream | RHEL 9.0 |
langpacks-core-da | rhel9-AppStream | RHEL 9.0 |
langpacks-core-de | rhel9-AppStream | RHEL 9.0 |
langpacks-core-dz | rhel9-AppStream | RHEL 9.0 |
langpacks-core-el | rhel9-AppStream | RHEL 9.0 |
langpacks-core-en | rhel9-AppStream | RHEL 9.0 |
langpacks-core-en_GB | rhel9-AppStream | RHEL 9.0 |
langpacks-core-eo | rhel9-AppStream | RHEL 9.0 |
langpacks-core-es | rhel9-AppStream | RHEL 9.0 |
langpacks-core-et | rhel9-AppStream | RHEL 9.0 |
langpacks-core-eu | rhel9-AppStream | RHEL 9.0 |
langpacks-core-fa | rhel9-AppStream | RHEL 9.0 |
langpacks-core-fi | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-af | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-am | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-ar | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-as | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-ast | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-be | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-bg | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-bn | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-bo | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-br | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-bs | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-ca | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-cs | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-cy | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-da | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-de | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-dz | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-el | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-en | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-eo | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-es | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-et | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-eu | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-fa | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-fi | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-fr | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-ga | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-gl | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-gu | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-he | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-hi | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-hr | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-hu | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-ia | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-id | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-is | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-it | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-ja | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-ka | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-kk | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-km | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-kn | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-ko | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-ku | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-lt | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-lv | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-mai | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-mk | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-ml | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-mr | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-ms | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-my | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-nb | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-ne | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-nl | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-nn | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-nr | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-nso | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-or | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-pa | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-pl | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-pt | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-ro | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-ru | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-si | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-sk | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-sl | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-sq | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-sr | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-ss | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-sv | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-ta | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-te | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-th | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-tn | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-tr | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-ts | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-uk | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-ur | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-ve | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-vi | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-xh | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-yi | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-zh_CN | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-zh_HK | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-zh_TW | rhel9-AppStream | RHEL 9.0 |
langpacks-core-font-zu | rhel9-AppStream | RHEL 9.0 |
langpacks-core-fr | rhel9-AppStream | RHEL 9.0 |
langpacks-core-ga | rhel9-AppStream | RHEL 9.0 |
langpacks-core-gl | rhel9-AppStream | RHEL 9.0 |
langpacks-core-gu | rhel9-AppStream | RHEL 9.0 |
langpacks-core-he | rhel9-AppStream | RHEL 9.0 |
langpacks-core-hi | rhel9-AppStream | RHEL 9.0 |
langpacks-core-hr | rhel9-AppStream | RHEL 9.0 |
langpacks-core-hu | rhel9-AppStream | RHEL 9.0 |
langpacks-core-ia | rhel9-AppStream | RHEL 9.0 |
langpacks-core-id | rhel9-AppStream | RHEL 9.0 |
langpacks-core-is | rhel9-AppStream | RHEL 9.0 |
langpacks-core-it | rhel9-AppStream | RHEL 9.0 |
langpacks-core-ja | rhel9-AppStream | RHEL 9.0 |
langpacks-core-ka | rhel9-AppStream | RHEL 9.0 |
langpacks-core-kk | rhel9-AppStream | RHEL 9.0 |
langpacks-core-km | rhel9-AppStream | RHEL 9.0 |
langpacks-core-kn | rhel9-AppStream | RHEL 9.0 |
langpacks-core-ko | rhel9-AppStream | RHEL 9.0 |
langpacks-core-ku | rhel9-AppStream | RHEL 9.0 |
langpacks-core-lt | rhel9-AppStream | RHEL 9.0 |
langpacks-core-lv | rhel9-AppStream | RHEL 9.0 |
langpacks-core-mai | rhel9-AppStream | RHEL 9.0 |
langpacks-core-mk | rhel9-AppStream | RHEL 9.0 |
langpacks-core-ml | rhel9-AppStream | RHEL 9.0 |
langpacks-core-mr | rhel9-AppStream | RHEL 9.0 |
langpacks-core-ms | rhel9-AppStream | RHEL 9.0 |
langpacks-core-my | rhel9-AppStream | RHEL 9.0 |
langpacks-core-nb | rhel9-AppStream | RHEL 9.0 |
langpacks-core-ne | rhel9-AppStream | RHEL 9.0 |
langpacks-core-nl | rhel9-AppStream | RHEL 9.0 |
langpacks-core-nn | rhel9-AppStream | RHEL 9.0 |
langpacks-core-nr | rhel9-AppStream | RHEL 9.0 |
langpacks-core-nso | rhel9-AppStream | RHEL 9.0 |
langpacks-core-or | rhel9-AppStream | RHEL 9.0 |
langpacks-core-pa | rhel9-AppStream | RHEL 9.0 |
langpacks-core-pl | rhel9-AppStream | RHEL 9.0 |
langpacks-core-pt | rhel9-AppStream | RHEL 9.0 |
langpacks-core-pt_BR | rhel9-AppStream | RHEL 9.0 |
langpacks-core-ro | rhel9-AppStream | RHEL 9.0 |
langpacks-core-ru | rhel9-AppStream | RHEL 9.0 |
langpacks-core-si | rhel9-AppStream | RHEL 9.0 |
langpacks-core-sk | rhel9-AppStream | RHEL 9.0 |
langpacks-core-sl | rhel9-AppStream | RHEL 9.0 |
langpacks-core-sq | rhel9-AppStream | RHEL 9.0 |
langpacks-core-sr | rhel9-AppStream | RHEL 9.0 |
langpacks-core-ss | rhel9-AppStream | RHEL 9.0 |
langpacks-core-sv | rhel9-AppStream | RHEL 9.0 |
langpacks-core-ta | rhel9-AppStream | RHEL 9.0 |
langpacks-core-te | rhel9-AppStream | RHEL 9.0 |
langpacks-core-th | rhel9-AppStream | RHEL 9.0 |
langpacks-core-tn | rhel9-AppStream | RHEL 9.0 |
langpacks-core-tr | rhel9-AppStream | RHEL 9.0 |
langpacks-core-ts | rhel9-AppStream | RHEL 9.0 |
langpacks-core-uk | rhel9-AppStream | RHEL 9.0 |
langpacks-core-ur | rhel9-AppStream | RHEL 9.0 |
langpacks-core-ve | rhel9-AppStream | RHEL 9.0 |
langpacks-core-vi | rhel9-AppStream | RHEL 9.0 |
langpacks-core-xh | rhel9-AppStream | RHEL 9.0 |
langpacks-core-yi | rhel9-AppStream | RHEL 9.0 |
langpacks-core-zh_CN | rhel9-AppStream | RHEL 9.0 |
langpacks-core-zh_HK | rhel9-AppStream | RHEL 9.0 |
langpacks-core-zh_TW | rhel9-AppStream | RHEL 9.0 |
langpacks-core-zu | rhel9-AppStream | RHEL 9.0 |
langpacks-dz | rhel9-AppStream | RHEL 9.0 |
langpacks-eo | rhel9-AppStream | RHEL 9.0 |
langpacks-ka | rhel9-AppStream | RHEL 9.0 |
langpacks-km | rhel9-AppStream | RHEL 9.0 |
langpacks-ku | rhel9-AppStream | RHEL 9.0 |
langpacks-my | rhel9-AppStream | RHEL 9.0 |
langpacks-yi | rhel9-AppStream | RHEL 9.0 |
langpacks-zh_HK | rhel9-AppStream | RHEL 9.0 |
lapack64 | rhel9-CRB | RHEL 9.3 |
lapack64_ | rhel9-CRB | RHEL 9.0 |
ldns-doc | rhel9-CRB | RHEL 9.1 |
ldns-utils | rhel9-CRB | RHEL 9.1 |
liba52-devel | rhel9-CRB | RHEL 9.0 |
libabigail | rhel9-CRB | RHEL 9.2 |
libasan8 | rhel9-AppStream | RHEL 9.1 |
libblkio | rhel9-AppStream | RHEL 9.3 |
libblkio-devel | rhel9-CRB | RHEL 9.3 |
libblockdev-nvme | rhel9-AppStream | RHEL 9.2 |
libblockdev-tools | rhel9-AppStream | RHEL 9.0 |
libbpf-tools | rhel9-AppStream | RHEL 9.0 |
libbrotli | rhel9-BaseOS | RHEL 9.0 |
libburn-doc | rhel9-AppStream | RHEL 9.0 |
libcbor | rhel9-BaseOS | RHEL 9.0 |
libcdr-devel | rhel9-CRB | RHEL 9.2 |
libdecor | rhel9-AppStream | RHEL 9.0 |
libdecor-devel | rhel9-CRB | RHEL 9.0 |
libdhash-devel | rhel9-CRB | RHEL 9.1 |
libdnf-plugin-subscription-manager | rhel9-BaseOS | RHEL 9.0 |
libdvdnav-devel | rhel9-CRB | RHEL 9.2 |
libeconf | rhel9-BaseOS | RHEL 9.0 |
libell | rhel9-AppStream | RHEL 9.0 |
libestr-devel | rhel9-CRB | RHEL 9.1 |
libfastjson-devel | rhel9-CRB | RHEL 9.3 |
libfdt-static | rhel9-CRB | RHEL 9.1 |
libfido2 | rhel9-BaseOS | RHEL 9.0 |
libfido2-devel | rhel9-CRB | RHEL 9.0 |
libfl-static | rhel9-CRB | RHEL 9.0 |
libfreehand-devel | rhel9-CRB | RHEL 9.2 |
libgccjit | rhel9-AppStream | RHEL 9.0 |
libgccjit-devel | rhel9-AppStream | RHEL 9.0 |
libgpiod | rhel9-AppStream | RHEL 9.1 |
libgpiod-c++ | rhel9-AppStream | RHEL 9.1 |
libgpiod-devel | rhel9-AppStream | RHEL 9.1 |
libgpiod-utils | rhel9-AppStream | RHEL 9.1 |
libhandy | rhel9-AppStream | RHEL 9.0 |
libi2c-devel | rhel9-CRB | RHEL 9.1 |
libi2cd | rhel9-AppStream | RHEL 9.1 |
libi2cd-devel | rhel9-AppStream | RHEL 9.1 |
libical-glib | rhel9-AppStream | RHEL 9.0 |
libical-glib-devel | rhel9-AppStream | RHEL 9.0 |
libisoburn-doc | rhel9-AppStream | RHEL 9.0 |
libisofs-doc | rhel9-AppStream | RHEL 9.0 |
libjcat | rhel9-BaseOS | RHEL 9.0 |
libjcat-devel | rhel9-CRB | RHEL 9.0 |
libknet1-compress-zstd-plugin | rhel9 HighAvailability | RHEL 9.0 |
libldac | rhel9-AppStream | RHEL 9.0 |
liblognorm-devel | rhel9-CRB | RHEL 9.3 |
libmemcached-awesome | rhel9-CRB | RHEL 9.0 |
libmemcached-awesome-devel | rhel9-CRB | RHEL 9.0 |
libmemcached-awesome-tools | rhel9-CRB | RHEL 9.0 |
libmpeg2 | rhel9-AppStream | RHEL 9.0 |
libmpeg2-devel | rhel9-CRB | RHEL 9.2 |
libmspub-devel | rhel9-CRB | RHEL 9.2 |
libmypaint | rhel9-AppStream | RHEL 9.0 |
libnetapi | rhel9-BaseOS | RHEL 9.2 |
libnetapi-devel | rhel9-CRB | RHEL 9.2 |
libnvme | rhel9-BaseOS | RHEL 9.1 |
libnvme-devel | rhel9-CRB | RHEL 9.1 |
libotr | rhel9-AppStream | RHEL 9.0 |
libotr-devel | rhel9-CRB | RHEL 9.0 |
libpagemaker-devel | rhel9-CRB | RHEL 9.2 |
libperf | rhel9-CRB | RHEL 9.3 |
libpmem2 | rhel9-AppStream | RHEL 9.0 |
libpmem2-debug | rhel9-AppStream | RHEL 9.0 |
libpmem2-devel | rhel9-AppStream | RHEL 9.0 |
libqrtr-glib | rhel9-BaseOS | RHEL 9.0 |
libqxp-devel | rhel9-CRB | RHEL 9.2 |
librabbitmq-tools | rhel9-AppStream | RHEL 9.0 |
libradospp-devel | rhel9-CRB | RHEL 9.0 |
librelp-devel | rhel9-CRB | RHEL 9.3 |
libreoffice | rhel9-AppStream | RHEL 9.2 |
libreoffice-help-eo | rhel9-AppStream | RHEL 9.0 |
libreoffice-langpack-eo | rhel9-AppStream | RHEL 9.0 |
libreoffice-langpack-fy | rhel9-AppStream | RHEL 9.0 |
libsane-airscan | rhel9-AppStream | RHEL 9.0 |
libsbc | rhel9-AppStream | RHEL 9.0 |
libsepol-utils | rhel9-AppStream | RHEL 9.1 |
libshaderc | rhel9-AppStream | RHEL 9.0 |
libshaderc-devel | rhel9-CRB | RHEL 9.1 |
libsmartcols-devel | rhel9-CRB | RHEL 9.2 |
libsndfile-utils | rhel9-AppStream | RHEL 9.0 |
libstoragemgmt-devel | rhel9-CRB | RHEL 9.1 |
libstoragemgmt-nfs-plugin | rhel9-AppStream | RHEL 9.0 |
libstoragemgmt-targetd-plugin | rhel9-AppStream | RHEL 9.0 |
libtracecmd | rhel9-BaseOS | RHEL 9.0 |
libtracecmd-devel | rhel9-CRB | RHEL 9.0 |
libtraceevent | rhel9-BaseOS | RHEL 9.0 |
libtraceevent-devel | rhel9-CRB | RHEL 9.0 |
libtracefs | rhel9-BaseOS | RHEL 9.0 |
libtracefs-devel | rhel9-CRB | RHEL 9.0 |
libtracker-sparql | rhel9-AppStream | RHEL 9.0 |
libtsan2 | rhel9-AppStream | RHEL 9.1 |
liburing-devel | rhel9-CRB | RHEL 9.3 |
libvala | rhel9-CRB | RHEL 9.0 |
libvala-devel | rhel9-CRB | RHEL 9.0 |
libvdpau-trace | rhel9-AppStream | RHEL 9.0 |
libverto-libev | rhel9-BaseOS | RHEL 9.0 |
libvirt-client-qemu | rhel9-CRB | RHEL 9.2 |
libvirt-daemon-common | rhel9-AppStream | RHEL 9.3 |
libvirt-daemon-lock | rhel9-AppStream | RHEL 9.3 |
libvirt-daemon-log | rhel9-AppStream | RHEL 9.3 |
libvirt-daemon-plugin-lockd | rhel9-AppStream | RHEL 9.3 |
libvirt-daemon-plugin-sanlock | rhel9-CRB | RHEL 9.3 |
libvirt-daemon-proxy | rhel9-AppStream | RHEL 9.3 |
libvma-utils | rhel9-AppStream | RHEL 9.0 |
libwebp-tools | rhel9-CRB | RHEL 9.2 |
libwmf-devel | rhel9-CRB | RHEL 9.1 |
libwpe | rhel9-AppStream | RHEL 9.0 |
libwpe-devel | rhel9-CRB | RHEL 9.1 |
libxcrypt-compat | rhel9-AppStream | RHEL 9.0 |
libxcvt | rhel9-AppStream | RHEL 9.2 |
libxcvt-devel | rhel9-CRB | RHEL 9.2 |
libxdp-devel | rhel9-CRB | RHEL 9.1 |
libxdp-static | rhel9-CRB | RHEL 9.1 |
libzmf-devel | rhel9-CRB | RHEL 9.2 |
linux-firmware-whence | rhel9-BaseOS | RHEL 9.0 |
LLD-test | rhel9-AppStream | RHEL 9.0 |
lmdb | rhel9-CRB | RHEL 9.0 |
lorax-docs | rhel9-AppStream | RHEL 9.0 |
low-memory-monitor | rhel9-AppStream | RHEL 9.0 |
lua-rpm-macros | rhel9-AppStream | RHEL 9.0 |
lua-srpm-macros | rhel9-AppStream | RHEL 9.0 |
man-db-cron | rhel9-AppStream | RHEL 9.2 |
mariadb-connector-c-doc | rhel9-CRB | RHEL 9.0 |
mariadb-connector-c-test | rhel9-CRB | RHEL 9.0 |
marshalparser | rhel9-CRB | RHEL 9.1 |
maven-surefire-provider-junit5 | rhel9-CRB | RHEL 9.0 |
mecab-devel | rhel9-CRB | RHEL 9.3 |
memcached-selinux | rhel9-AppStream | RHEL 9.0 |
mesa-demos | rhel9-AppStream | RHEL 9.0 |
mingw-qemu-ga-win | rhel9-AppStream | RHEL 9.3 |
mingw-w64-tools | rhel9-CRB | RHEL 9.2 |
mingw32-libgcc | rhel9-CRB | RHEL 9.1 |
mingw32-libstdc++ | rhel9-CRB | RHEL 9.3 |
mingw32-srvany | rhel9-AppStream | RHEL 9.0 |
mingw64-libgcc | rhel9-CRB | RHEL 9.1 |
mingw64-libstdc++ | rhel9-CRB | RHEL 9.3 |
mkfontscale | rhel9-AppStream | RHEL 9.0 |
mkpasswd | rhel9-AppStream | RHEL 9.1 |
mod_jk | rhel9-AppStream | RHEL 9.0 |
mod_lua | rhel9-AppStream | RHEL 9.0 |
mod_proxy_cluster | rhel9-AppStream | RHEL 9.0 |
iPXEdecimal | rhel9-AppStream | RHEL 9.2 |
mpdecimal++ | rhel9-CRB | RHEL 9.2 |
mpdecimal-devel | rhel9-CRB | RHEL 9.2 |
mpdecimal-doc | rhel9-CRB | RHEL 9.2 |
mpich-autoload | rhel9-AppStream | RHEL 9.0 |
mptcpd | rhel9-AppStream | RHEL 9.0 |
mypaint-brushes | rhel9-AppStream | RHEL 9.0 |
mythes-eo | rhel9-AppStream | RHEL 9.0 |
nbdkit-srpm-macros | rhel9-CRB | RHEL 9.1 |
netronome-firmware | rhel9-BaseOS | RHEL 9.0 |
nfs-utils-coreos | rhel9-AppStream | RHEL 9.0 |
nfsv4-client-utils | rhel9-AppStream | RHEL 9.1 |
nginx-core | rhel9-AppStream | RHEL 9.1 |
nmstate-devel | rhel9-CRB | RHEL 9.1 |
nmstate-static | rhel9-CRB | RHEL 9.1 |
nodejs-devel | rhel9-AppStream | RHEL 9.1 |
nodejs-libs | rhel9-AppStream | RHEL 9.0 |
nodejs-packaging | rhel9-AppStream | RHEL 9.1 |
nodejs-packaging-bundler | rhel9-AppStream | RHEL 9.1 |
NPTH-devel | rhel9-CRB | RHEL 9.0 |
nss_wrapper-libs | rhel9-AppStream | RHEL 9.1 |
nvme-stas | rhel9-AppStream | RHEL 9.1 |
ocaml-brlapi | rhel9-CRB | RHEL 9.1 |
ocaml-calendar | rhel9-CRB | RHEL 9.1 |
ocaml-calendar-devel | rhel9-CRB | RHEL 9.1 |
ocaml-camomile | rhel9-CRB | RHEL 9.1 |
ocaml-camomile-data | rhel9-CRB | RHEL 9.1 |
ocaml-camomile-devel | rhel9-CRB | RHEL 9.1 |
ocaml-csexp | rhel9-CRB | RHEL 9.1 |
ocaml-csexp-devel | rhel9-CRB | RHEL 9.1 |
ocaml-csv | rhel9-CRB | RHEL 9.1 |
ocaml-csv-devel | rhel9-CRB | RHEL 9.1 |
ocaml-curses | rhel9-CRB | RHEL 9.1 |
ocaml-curses-devel | rhel9-CRB | RHEL 9.1 |
ocaml-docs | rhel9-CRB | RHEL 9.1 |
ocaml-dune | rhel9-CRB | RHEL 9.1 |
ocaml-dune-devel | rhel9-CRB | RHEL 9.1 |
ocaml-dune-doc | rhel9-CRB | RHEL 9.1 |
ocaml-dune-emacs | rhel9-CRB | RHEL 9.1 |
ocaml-fileutils | rhel9-CRB | RHEL 9.1 |
ocaml-fileutils-devel | rhel9-CRB | RHEL 9.1 |
ocaml-gettext | rhel9-CRB | RHEL 9.1 |
ocaml-gettext-devel | rhel9-CRB | RHEL 9.1 |
ocaml-libvirt | rhel9-CRB | RHEL 9.1 |
ocaml-libvirt-devel | rhel9-CRB | RHEL 9.1 |
ocaml-ocamlbuild-doc | rhel9-CRB | RHEL 9.1 |
ocaml-source | rhel9-CRB | RHEL 9.1 |
ocaml-xml-light | rhel9-CRB | RHEL 9.1 |
ocaml-xml-light-devel | rhel9-CRB | RHEL 9.1 |
open-vm-tools-salt-minion | rhel9-AppStream | RHEL 9.1 |
open-vm-tools-test | rhel9-AppStream | RHEL 9.0 |
openblas-serial | rhel9-AppStream | RHEL 9.0 |
OpenEXR | rhel9-AppStream | RHEL 9.0 |
OpenEXR-devel | rhel9-CRB | RHEL 9.0 |
openexr-libs | rhel9-AppStream | RHEL 9.0 |
openldap-compat | rhel9-BaseOS | RHEL 9.0 |
openmpi-java | rhel9-AppStream | RHEL 9.0 |
openslp-devel | rhel9-CRB | RHEL 9.0 |
openslp-server | rhel9-AppStream | RHEL 9.0 |
pam-docs | rhel9-AppStream | RHEL 9.0 |
pam_wrapper | rhel9-CRB | RHEL 9.1 |
passt | rhel9-AppStream | RHEL 9.2 |
passt-selinux | rhel9-AppStream | RHEL 9.2 |
pbzip2 | rhel9-AppStream | RHEL 9.0 |
pcp-pmda-bpf | rhel9-AppStream | RHEL 9.0 |
pcre2-syntax | rhel9-BaseOS | RHEL 9.0 |
perl-BSD-Resource | rhel9-AppStream | RHEL 9.0 |
perl-Cyrus | rhel9-AppStream | RHEL 9.0 |
perl-DBD-MariaDB | rhel9-AppStream | RHEL 9.0 |
perl-ldns | rhel9-CRB | RHEL 9.1 |
perl-Mail-AuthenticationResults | rhel9-AppStream | RHEL 9.0 |
perl-Module-Signature | rhel9-AppStream | RHEL 9.0 |
perl-Net-CIDR-Lite | rhel9-AppStream | RHEL 9.0 |
perl-Net-DNS-Nameserver | rhel9-CRB | RHEL 9.2 |
perl-XString | rhel9-CRB | RHEL 9.0 |
pf-bb-config | rhel9-AppStream | RHEL 9.2 |
php-libguestfs | rhel9-CRB | RHEL 9.1 |
pinentry-tty | rhel9-AppStream | RHEL 9.0 |
pipewire-alsa | rhel9-AppStream | RHEL 9.0 |
pipewire-gstreamer | rhel9-AppStream | RHEL 9.0 |
pipewire-jack-audio-connection-kit | rhel9-AppStream | RHEL 9.0 |
pipewire-jack-audio-connection-kit-devel | rhel9-AppStream | RHEL 9.0 |
pipewire-module-x11 | rhel9-AppStream | RHEL 9.3 |
pipewire-pulseaudio | rhel9-AppStream | RHEL 9.0 |
pki-jackson-annotations | rhel9-AppStream | RHEL 9.0 |
pki-jackson-core | rhel9-AppStream | RHEL 9.0 |
pki-jackson-databind | rhel9-AppStream | RHEL 9.0 |
pki-jackson-jaxrs-json-provider | rhel9-AppStream | RHEL 9.0 |
pki-jackson-jaxrs-providers | rhel9-AppStream | RHEL 9.0 |
pki-jackson-module-jaxb-annotations | rhel9-AppStream | RHEL 9.0 |
pki-resteasy | rhel9-AppStream | RHEL 9.3 |
pki-resteasy-client | rhel9-AppStream | RHEL 9.0 |
pki-resteasy-core | rhel9-AppStream | RHEL 9.0 |
pki-resteasy-jackson2-provider | rhel9-AppStream | RHEL 9.0 |
plotnetcfg | rhel9-CRB | RHEL 9.0 |
pmix-pmi | rhel9-AppStream | RHEL 9.0 |
pmix-pmi-devel | rhel9-CRB | RHEL 9.0 |
pmix-tools | rhel9-AppStream | RHEL 9.0 |
poppler-data-devel | rhel9-CRB | RHEL 9.2 |
postfix-lmdb | rhel9-AppStream | RHEL 9.3 |
postgresql-docs | rhel9-CRB | RHEL 9.1 |
postgresql-private-devel | rhel9-CRB | RHEL 9.0 |
postgresql-private-libs | rhel9-AppStream | RHEL 9.0 |
postgresql-static | rhel9-CRB | RHEL 9.1 |
postgresql-test-rpm-macros | rhel9-AppStream | RHEL 9.2 |
postgresql-upgrade-devel | rhel9-CRB | RHEL 9.1 |
power-profiles-daemon | rhel9-AppStream | RHEL 9.0 |
procps-ng-devel | rhel9-CRB | RHEL 9.2 |
pt-sans-fonts | rhel9-AppStream | RHEL 9.0 |
pybind11-devel | rhel9-CRB | RHEL 9.0 |
pyparsing-doc | rhel9-CRB | RHEL 9.0 |
pyproject-rpm-macros | rhel9-CRB | RHEL 9.0 |
pyproject-srpm-macros | rhel9-AppStream | RHEL 9.2 |
python-dateutil-doc | rhel9-CRB | RHEL 9.0 |
python-packaging-doc | rhel9-CRB | RHEL 9.0 |
python-sphinx-doc | rhel9-CRB | RHEL 9.0 |
python-sphinx_rtd_theme-doc | rhel9-CRB | RHEL 9.0 |
python-unversioned-command | rhel9-AppStream | RHEL 9.0 |
python3 | rhel9-BaseOS | RHEL 9.0 |
python3-alembic | rhel9-AppStream | RHEL 9.1 |
python3-appdirs | rhel9-AppStream | RHEL 9.0 |
python3-babeltrace | rhel9-CRB | RHEL 9.1 |
python3-cairo-devel | rhel9-CRB | RHEL 9.1 |
python3-capstone | rhel9-CRB | RHEL 9.2 |
python3-debug | rhel9-CRB | RHEL 9.0 |
python3-devel | rhel9-AppStream | RHEL 9.0 |
python3-dnf-plugin-leaves | rhel9-AppStream | RHEL 9.3 |
python3-dnf-plugin-modulesync | rhel9-AppStream | RHEL 9.1 |
python3-dnf-plugin-show-leaves | rhel9-AppStream | RHEL 9.3 |
python3-file-magic | rhel9-AppStream | RHEL 9.0 |
python3-gluster | rhel9-AppStream | RHEL 9.0 |
python3-gobject-base-noarch | rhel9-BaseOS | RHEL 9.1 |
python3-gobject-devel | rhel9-CRB | RHEL 9.0 |
python3-greenlet | rhel9-AppStream | RHEL 9.1 |
python3-greenlet-devel | rhel9-CRB | RHEL 9.3 |
python3-i2c-tools | rhel9-AppStream | RHEL 9.1 |
python3-idm-pki | rhel9-AppStream | RHEL 9.1 |
python3-imath | rhel9-AppStream | RHEL 9.0 |
python3-iniconfig | rhel9-CRB | RHEL 9.0 |
python3-keylime | rhel9-AppStream | RHEL 9.1 |
python3-lark-parser | rhel9-AppStream | RHEL 9.1 |
python3-lasso | rhel9-AppStream | RHEL 9.2 |
python3-ldns | rhel9-CRB | RHEL 9.1 |
python3-libevdev | rhel9-AppStream | RHEL 9.0 |
python3-libfdt | rhel9-CRB | RHEL 9.1 |
python3-libgpiod | rhel9-AppStream | RHEL 9.1 |
python3-libnvme | rhel9-AppStream | RHEL 9.1 |
python3-net-snmp | rhel9-AppStream | RHEL 9.0 |
python3-pacemaker | rhel9 HighAvailability | RHEL 9.3 |
python3-pefile | rhel9-AppStream | RHEL 9.3 |
python3-psutil-tests | rhel9-CRB | RHEL 9.0 |
python3-pybind11 | rhel9-CRB | RHEL 9.0 |
python3-pycdlib | rhel9-AppStream | RHEL 9.0 |
python3-pyelftools | rhel9-AppStream | RHEL 9.0 |
python3-pyrsistent | rhel9-AppStream | RHEL 9.0 |
python3-pytest-subtests | rhel9-CRB | RHEL 9.0 |
python3-pytest-timeout | rhel9-CRB | RHEL 9.0 |
python3-readthedocs-sphinx-ext | rhel9-CRB | RHEL 9.0 |
python3-requests+security | rhel9-AppStream | RHEL 9.0 |
python3-requests+socks | rhel9-AppStream | RHEL 9.0 |
python3-requests-gssapi | rhel9-AppStream | RHEL 9.0 |
python3-resolvelib | rhel9-AppStream | RHEL 9.0 |
python3-ruamel-yaml | rhel9-CRB | RHEL 9.0 |
python3-ruamel-yaml-clib | rhel9-CRB | RHEL 9.0 |
python3-samba-dc | rhel9-BaseOS | RHEL 9.2 |
python3-samba-devel | rhel9-CRB | RHEL 9.2 |
python3-samba-test | rhel9-CRB | RHEL 9.2 |
python3-scapy | rhel9-AppStream | RHEL 9.0 |
python3-scour | rhel9-AppStream | RHEL 9.0 |
python3-setuptools_scm+toml | rhel9-CRB | RHEL 9.0 |
python3-sphinx-latex | rhel9-CRB | RHEL 9.0 |
python3-sphinxcontrib-applehelp | rhel9-CRB | RHEL 9.0 |
python3-sphinxcontrib-devhelp | rhel9-CRB | RHEL 9.0 |
python3-sphinxcontrib-htmlhelp | rhel9-CRB | RHEL 9.0 |
python3-sphinxcontrib-httpdomain | rhel9-CRB | RHEL 9.0 |
python3-sphinxcontrib-jsmath | rhel9-CRB | RHEL 9.0 |
python3-sphinxcontrib-qthelp | rhel9-CRB | RHEL 9.0 |
python3-sphinxcontrib-serializinghtml | rhel9-CRB | RHEL 9.0 |
python3-sqlalchemy | rhel9-AppStream | RHEL 9.1 |
python3-toml | rhel9-AppStream | RHEL 9.0 |
python3-tomli | rhel9-AppStream | RHEL 9.3 |
python3-tornado | rhel9-AppStream | RHEL 9.1 |
python3-urllib-gssapi | rhel9-AppStream | RHEL 9.0 |
python3-virt-firmware | rhel9-AppStream | RHEL 9.2 |
python3-volume_key | rhel9-AppStream | RHEL 9.0 |
python3-wcwidth | rhel9-CRB | RHEL 9.0 |
python3.11 | rhel9-AppStream | RHEL 9.2 |
python3.11-attrs | rhel9-CRB | RHEL 9.2 |
python3.11-cffi | rhel9-AppStream | RHEL 9.2 |
python3.11-charset-normalizer | rhel9-AppStream | RHEL 9.2 |
python3.11-cryptography | rhel9-AppStream | RHEL 9.2 |
python3.11-Cython | rhel9-CRB | RHEL 9.2 |
python3.11-debug | rhel9-CRB | RHEL 9.2 |
python3.11-devel | rhel9-AppStream | RHEL 9.2 |
python3.11-idle | rhel9-CRB | RHEL 9.2 |
python3.11-idna | rhel9-AppStream | RHEL 9.2 |
python3.11-iniconfig | rhel9-CRB | RHEL 9.2 |
python3.11-libs | rhel9-AppStream | RHEL 9.2 |
python3.11-lxml | rhel9-AppStream | RHEL 9.2 |
python3.11-mod_wsgi | rhel9-AppStream | RHEL 9.2 |
python3.11-numpy | rhel9-AppStream | RHEL 9.2 |
python3.11-numpy-f2py | rhel9-AppStream | RHEL 9.2 |
python3.11-packaging | rhel9-CRB | RHEL 9.2 |
python3.11-pip | rhel9-AppStream | RHEL 9.2 |
python3.11-pip-wheel | rhel9-AppStream | RHEL 9.2 |
python3.11-pluggy | rhel9-CRB | RHEL 9.2 |
python3.11-ply | rhel9-AppStream | RHEL 9.2 |
python3.11-psycopg2 | rhel9-AppStream | RHEL 9.2 |
python3.11-psycopg2-debug | rhel9-CRB | RHEL 9.2 |
python3.11-psycopg2-tests | rhel9-CRB | RHEL 9.2 |
python3.11-pybind11 | rhel9-CRB | RHEL 9.2 |
python3.11-pybind11-devel | rhel9-CRB | RHEL 9.2 |
python3.11-pycparser | rhel9-AppStream | RHEL 9.2 |
python3.11-PyMySQL | rhel9-AppStream | RHEL 9.2 |
python3.11-PyMySQL+rsa | rhel9-AppStream | RHEL 9.2 |
python3.11-pyparsing | rhel9-CRB | RHEL 9.2 |
python3.11-pysocks | rhel9-AppStream | RHEL 9.2 |
python3.11-pytest | rhel9-CRB | RHEL 9.2 |
python3.11-pyyaml | rhel9-AppStream | RHEL 9.2 |
python3.11-requests | rhel9-AppStream | RHEL 9.2 |
python3.11-requests+security | rhel9-AppStream | RHEL 9.2 |
python3.11-requests+socks | rhel9-AppStream | RHEL 9.2 |
python3.11-scipy | rhel9-AppStream | RHEL 9.2 |
python3.11-semantic_version | rhel9-CRB | RHEL 9.2 |
python3.11-setuptools | rhel9-AppStream | RHEL 9.2 |
python3.11-setuptools-rust | rhel9-CRB | RHEL 9.2 |
python3.11-setuptools-wheel | rhel9-AppStream | RHEL 9.2 |
python3.11-six | rhel9-AppStream | RHEL 9.2 |
python3.11-test | rhel9-CRB | RHEL 9.2 |
python3.11-tkinter | rhel9-AppStream | RHEL 9.2 |
python3.11-urllib3 | rhel9-AppStream | RHEL 9.2 |
python3.11-wheel | rhel9-AppStream | RHEL 9.2 |
python3.11-wheel-wheel | rhel9-CRB | RHEL 9.2 |
qatlib-service | rhel9-AppStream | RHEL 9.1 |
qemu-ga-win | rhel9-AppStream | RHEL 9.0 |
qemu-kvm-audio-pa | rhel9-AppStream | RHEL 9.0 |
qemu-kvm-block-blkio | rhel9-AppStream | RHEL 9.3 |
qemu-kvm-device-display-virtio-gpu | rhel9-AppStream | RHEL 9.0 |
qemu-kvm-device-display-virtio-gpu-gl | rhel9-AppStream | RHEL 9.0 |
qemu-kvm-device-display-virtio-gpu-pci | rhel9-AppStream | RHEL 9.0 |
qemu-kvm-device-display-virtio-gpu-pci-gl | rhel9-AppStream | RHEL 9.0 |
qemu-kvm-device-display-virtio-vga | rhel9-AppStream | RHEL 9.0 |
qemu-kvm-device-display-virtio-vga-gl | rhel9-AppStream | RHEL 9.0 |
qemu-kvm-device-usb-host | rhel9-AppStream | RHEL 9.0 |
qemu-kvm-device-usb-redirect | rhel9-AppStream | RHEL 9.0 |
qemu-kvm-tools | rhel9-AppStream | RHEL 9.0 |
qemu-kvm-ui-egl-headless | rhel9-AppStream | RHEL 9.0 |
qemu-pr-helper | rhel9-AppStream | RHEL 9.0 |
qpdf | rhel9-CRB | RHEL 9.1 |
qpdf-devel | rhel9-CRB | RHEL 9.2 |
qt5 | rhel9-AppStream | RHEL 9.0 |
qt5-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qt3d-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtbase-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtcharts-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtconnectivity-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtdatavis3d-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtdeclarative-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtgamepad-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtgraphicaleffects-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtimageformats-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtlocation-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtmultimedia-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtpurchasing-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtquickcontrols-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtquickcontrols2-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtremoteobjects-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtscript-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtscxml-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtsensors-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtserialbus-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtserialport-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtspeech-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtsvg-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qttools-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtvirtualkeyboard-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtwayland-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtwebchannel-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtwebsockets-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtwebview-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtx11extras-doc | rhel9-AppStream | RHEL 9.0 |
qt5-qtxmlpatterns-doc | rhel9-AppStream | RHEL 9.0 |
realtime-setup | rhel9-NFV | RHEL 9.0 |
realtime-tests | rhel9-AppStream | RHEL 9.0 |
redhat-display-fonts | rhel9-AppStream | RHEL 9.0 |
redhat-cloud-client-configuration | rhel9-AppStream | RHEL 9.1 |
redhat-mono-fonts | rhel9-AppStream | RHEL 9.0 |
redhat-sb-certs | rhel9-CRB | RHEL 9.0 |
redhat-text-fonts | rhel9-AppStream | RHEL 9.0 |
resource-agents-cloud | rhel9 HighAvailability | RHEL 9.0 |
Restore | rhel9-BaseOS | RHEL 9.0 |
rhc-devel | rhel9-CRB | RHEL 9.1 |
rpm-plugin-audit | rhel9-BaseOS | RHEL 9.0 |
rpm-sign-libs | rhel9-BaseOS | RHEL 9.0 |
rsyslog-logrotate | rhel9-AppStream | RHEL 9.0 |
rtla | rhel9-AppStream | RHEL 9.2 |
ruby-bundled-gems | rhel9-AppStream | RHEL 9.1 |
rubygem-thread_order | rhel9-CRB | RHEL 9.0 |
rust-analyzer | rhel9-AppStream | RHEL 9.2 |
rv | rhel9-AppStream | RHEL 9.3 |
S-nail | rhel9-AppStream | RHEL 9.0 |
samba-dc-libs | rhel9-BaseOS | RHEL 9.2 |
samba-dcerpc | rhel9-BaseOS | RHEL 9.2 |
samba-ldb-ldap-modules | rhel9-BaseOS | RHEL 9.2 |
samba-tools | rhel9-BaseOS | RHEL 9.2 |
samba-usershares | rhel9-BaseOS | RHEL 9.2 |
sane-airscan | rhel9-AppStream | RHEL 9.0 |
sdl12-compat | rhel9-AppStream | RHEL 9.0 |
sdl12-compat-devel | rhel9-CRB | RHEL 9.0 |
setxkbmap | rhel9-AppStream | RHEL 9.0 |
Sid | rhel9-AppStream | RHEL 9.0 |
sid-base-libs | rhel9-AppStream | RHEL 9.0 |
sid-iface-libs | rhel9-AppStream | RHEL 9.0 |
sid-log-libs | rhel9-AppStream | RHEL 9.0 |
sid-mod-block-blkid | rhel9-AppStream | RHEL 9.0 |
sid-mod-block-dm-mpath | rhel9-AppStream | RHEL 9.0 |
sid-mod-dummies | rhel9-AppStream | RHEL 9.0 |
sid-resource-libs | rhel9-AppStream | RHEL 9.0 |
sid-tools | rhel9-AppStream | RHEL 9.0 |
sip6 | rhel9-AppStream | RHEL 9.1 |
speech-tools-libs | rhel9-AppStream | RHEL 9.0 |
ssh-key-dir | rhel9-AppStream | RHEL 9.0 |
sssd-idp | rhel9-AppStream | RHEL 9.1 |
stratisd-tools | rhel9-AppStream | RHEL 9.3 |
sudo-python-plugin | rhel9-AppStream | RHEL 9.0 |
synce4l | rhel9-AppStream | RHEL 9.2 |
sysprof-capture-devel | rhel9-AppStream | RHEL 9.0 |
systemd-boot-unsigned | rhel9-CRB | RHEL 9.2 |
systemd-oomd | rhel9-BaseOS | RHEL 9.0 |
systemd-resolved | rhel9-BaseOS | RHEL 9.0 |
systemd-rpm-macros | rhel9-BaseOS | RHEL 9.0 |
tesseract-langpack-eng | rhel9-AppStream | RHEL 9.0 |
tesseract-tessdata-doc | rhel9-AppStream | RHEL 9.0 |
tex-preview | rhel9-AppStream | RHEL 9.0 |
texlive-alphalph | rhel9-AppStream | RHEL 9.0 |
texlive-atbegshi | rhel9-AppStream | RHEL 9.0 |
texlive-attachfile2 | rhel9-AppStream | RHEL 9.0 |
texlive-atveryend | rhel9-AppStream | RHEL 9.0 |
texlive-auxhook | rhel9-AppStream | RHEL 9.0 |
texlive-bigintcalc | rhel9-AppStream | RHEL 9.0 |
texlive-bitset | rhel9-AppStream | RHEL 9.0 |
texlive-bookmark | rhel9-AppStream | RHEL 9.0 |
texlive-catchfile | rhel9-AppStream | RHEL 9.0 |
texlive-colorprofiles | rhel9-AppStream | RHEL 9.0 |
texlive-dehyph | rhel9-AppStream | RHEL 9.0 |
texlive-epstopdf-pkg | rhel9-AppStream | RHEL 9.0 |
texlive-etexcmds | rhel9-AppStream | RHEL 9.0 |
texlive-etoc | rhel9-AppStream | RHEL 9.0 |
texlive-footnotehyper | rhel9-AppStream | RHEL 9.0 |
texlive-gettitlestring | rhel9-AppStream | RHEL 9.0 |
texlive-gnu-freefont | rhel9-CRB | RHEL 9.0 |
texlive-grfext | rhel9-AppStream | RHEL 9.0 |
texlive-grffile | rhel9-AppStream | RHEL 9.0 |
texlive-hanging | rhel9-AppStream | RHEL 9.0 |
texlive-hobsub | rhel9-AppStream | RHEL 9.0 |
texlive-hologo | rhel9-AppStream | RHEL 9.0 |
texlive-hycolor | rhel9-AppStream | RHEL 9.0 |
texlive-hyphenex | rhel9-AppStream | RHEL 9.0 |
texlive-ifplatform | rhel9-AppStream | RHEL 9.0 |
texlive-infwarerr | rhel9-AppStream | RHEL 9.0 |
texlive-intcalc | rhel9-AppStream | RHEL 9.0 |
texlive-kvdefinekeys | rhel9-AppStream | RHEL 9.0 |
texlive-kvoptions | rhel9-AppStream | RHEL 9.0 |
texlive-kvsetkeys | rhel9-AppStream | RHEL 9.0 |
texlive-l3backend | rhel9-AppStream | RHEL 9.0 |
texlive-latexbug | rhel9-AppStream | RHEL 9.0 |
texlive-letltxmacro | rhel9-AppStream | RHEL 9.0 |
texlive-listofitems | rhel9-AppStream | RHEL 9.0 |
texlive-ltxcmds | rhel9-AppStream | RHEL 9.0 |
texlive-luahbtex | rhel9-AppStream | RHEL 9.0 |
texlive-lwarp | rhel9-AppStream | RHEL 9.0 |
texlive-minitoc | rhel9-AppStream | RHEL 9.0 |
texlive-modes | rhel9-AppStream | RHEL 9.0 |
texlive-newfloat | rhel9-AppStream | RHEL 9.0 |
texlive-newunicodechar | rhel9-AppStream | RHEL 9.0 |
texlive-notoccite | rhel9-AppStream | RHEL 9.0 |
texlive-obsolete | rhel9-AppStream | RHEL 9.0 |
texlive-pdfcolmk | rhel9-AppStream | RHEL 9.0 |
texlive-pdfescape | rhel9-AppStream | RHEL 9.0 |
texlive-pdflscape | rhel9-AppStream | RHEL 9.0 |
texlive-pdftexcmds | rhel9-AppStream | RHEL 9.0 |
texlive-ragged2e | rhel9-AppStream | RHEL 9.0 |
texlive-refcount | rhel9-AppStream | RHEL 9.0 |
texlive-rerunfilecheck | rhel9-AppStream | RHEL 9.0 |
texlive-sansmathaccent | rhel9-AppStream | RHEL 9.0 |
texlive-stackengine | rhel9-AppStream | RHEL 9.0 |
texlive-stringenc | rhel9-AppStream | RHEL 9.0 |
texlive-texlive-scripts-extra | rhel9-AppStream | RHEL 9.0 |
texlive-translator | rhel9-AppStream | RHEL 9.0 |
texlive-ucharcat | rhel9-AppStream | RHEL 9.0 |
texlive-uniquecounter | rhel9-AppStream | RHEL 9.0 |
texlive-wasy-type1 | rhel9-AppStream | RHEL 9.0 |
texlive-zref | rhel9-AppStream | RHEL 9.0 |
Tomcat | rhel9-AppStream | RHEL 9.2 |
tomcat-admin-webapps | rhel9-AppStream | RHEL 9.2 |
tomcat-docs-webapp | rhel9-AppStream | RHEL 9.2 |
tomcat-el-3.0-api | rhel9-AppStream | RHEL 9.2 |
tomcat-jsp-2.3-api | rhel9-AppStream | RHEL 9.2 |
tomcat-lib | rhel9-AppStream | RHEL 9.2 |
tomcat-servlet-4.0-api | rhel9-AppStream | RHEL 9.2 |
tomcat-webapps | rhel9-AppStream | RHEL 9.2 |
totem-video-thumbnailer | rhel9-AppStream | RHEL 9.0 |
tpm2-pkcs11 | rhel9-AppStream | RHEL 9.0 |
tpm2-pkcs11-tools | rhel9-AppStream | RHEL 9.0 |
tuned-profiles-postgresql | rhel9-AppStream | RHEL 9.1 |
tuned-profiles-spectrumscale | rhel9-AppStream | RHEL 9.0 |
twolame | rhel9-AppStream | RHEL 9.0 |
uchardet | rhel9-CRB | RHEL 9.0 |
uchardet-devel | rhel9-CRB | RHEL 9.1 |
unbound-devel | rhel9-CRB | RHEL 9.1 |
unifdef | rhel9-CRB | RHEL 9.3 |
uresourced | rhel9-AppStream | RHEL 9.0 |
usbredir-server | rhel9-AppStream | RHEL 9.2 |
utf8proc-devel | rhel9-CRB | RHEL 9.0 |
util-linux-core | rhel9-BaseOS | RHEL 9.0 |
uuid-c++ | rhel9-AppStream | RHEL 9.0 |
uuid-dce | rhel9-AppStream | RHEL 9.0 |
virt-p2v | rhel9-AppStream | RHEL 9.0 |
virt-win-reg | rhel9-AppStream | RHEL 9.0 |
virtiofsd | rhel9-AppStream | RHEL 9.0 |
voikko-fi | rhel9-AppStream | RHEL 9.0 |
WALinuxAgent-cvm | rhel9-CRB | RHEL 9.3 |
Wayland-utils | rhel9-AppStream | RHEL 9.0 |
waypipe | rhel9-AppStream | RHEL 9.0 |
wireguard-tools | rhel9-AppStream | RHEL 9.0 |
wireless-regdb | rhel9-BaseOS | RHEL 9.0 |
wireplumber | rhel9-AppStream | RHEL 9.0 |
wireplumber-libs | rhel9-AppStream | RHEL 9.0 |
wpebackend-fdo | rhel9-AppStream | RHEL 9.0 |
wpebackend-fdo-devel | rhel9-CRB | RHEL 9.1 |
xdg-dbus-proxy | rhel9-AppStream | RHEL 9.0 |
xdg-desktop-portal-gnome | rhel9-AppStream | RHEL 9.1 |
xfsprogs-xfs_scrub | rhel9-AppStream | RHEL 9.0 |
xhtml2fo-style-xsl | rhel9-AppStream | RHEL 9.0 |
xkbcomp | rhel9-AppStream | RHEL 9.0 |
xmlstarlet | rhel9-AppStream | RHEL 9.1 |
xmlto-tex | rhel9-AppStream | RHEL 9.0 |
xmlto-xhtml | rhel9-AppStream | RHEL 9.0 |
xmvn-tools | rhel9-CRB | RHEL 9.0 |
xorg-x11-server-source | rhel9-CRB | RHEL 9.1 |
xxhash | rhel9-AppStream | RHEL 9.1 |
Xxhash-devel | rhel9-CRB | RHEL 9.1 |
xxhash-doc | rhel9-CRB | RHEL 9.1 |
Xxhash-libs | rhel9-AppStream | RHEL 9.1 |
yara | rhel9-AppStream | RHEL 9.1 |
yara-devel | rhel9-CRB | RHEL 9.1 |
zram-generator | rhel9-AppStream | RHEL 9.0 |
A.2. 패키지 교체
다음 표에는 교체, 이름 변경, 병합 또는 분할된 패키지가 나열되어 있습니다.
원래 패키지 | 새 패키지 | 이후 변경됨 | 참고 |
---|---|---|---|
Apache-commons-lang (javapackages-tools:201801), apache-commons-lang3 (javapackages-tools:201801) | apache-commons-lang3 | RHEL 9.0 | |
Apache-commons-lang (pki-deps:10.6), apache-commons-lang3 (maven:3.5, maven:3.6) | apache-commons-lang3 | RHEL 9.0 | |
bind-libs-lite | bind-libs | RHEL 9.0 | |
bind-lite-devel | bind-devel | RHEL 9.0 | |
binutils | binutils, binutils-gold | RHEL 9.0 | |
clutter-gst2 | clutter-gst3 | RHEL 9.0 | |
crda | wireless-regdb | RHEL 9.0 | |
dnf-plugin-subscription-manager, subscription-manager | subscription-manager | RHEL 9.0 | |
fapolicyd-dnf-plugin | rpm-plugin-fapolicyd | RHEL 9.1 | |
FIO | fio, fio-engine-dev-dax, fio-engine-libaio, fio-engine-libpmem, fio-engine-pmem, fio-engine-pmem, fio-engine-rados, fio-engine-rdbd, fio-engine-rdmad | RHEL 9.0 | |
FIO | fio, fio-engine-http, fio-engine-libaio, fio-engine-nbd, fio-engine-rados, fio-engine-rbd, fio-engine-rdma | RHEL 9.0 | |
flex-devel | libfl-static | RHEL 9.0 | |
fontpackages-devel | fonts-rpm-macros | RHEL 9.0 | |
fontpackages-filesystem | fonts-filesystem | RHEL 9.0 | |
gcc-toolset-12-binutils | gcc-toolset-13-binutils | RHEL 9.3 | |
genisoimage | xorriso | RHEL 9.0 |
|
GlassFish-jaxb-api(pki-deps:10.6) | jaxb-api | RHEL 9.0 | |
GlassFish-jaxb-runtime (pki-deps:10.6) | jaxb-impl | RHEL 9.0 | |
gnome-session-kiosk-session | gnome-kiosk | RHEL 9.0 | |
google-crosextra-caladea-fonts | HT-caladea-fonts | RHEL 9.0 | |
google-crosextra-carlito-fonts | google-carlito-fonts | RHEL 9.0 | |
google-noto-mono-fonts | google-noto-sans-mono-fonts | RHEL 9.0 | |
Guava(maven:3.6), guava20(maven:3.5) | Guava | RHEL 9.0 | |
guava20 (javapackages-tools:201801) | Guava | RHEL 9.0 | |
Hesiod | compat-hesiod | RHEL 9.0 | |
HT-caladea-fonts | google-crosextra-caladea-fonts | RHEL 9.3 | |
httpcomponents-client(javapackages-tools:201801), jakarta-commons-httpclient(javapackages-tools:201801) | httpcomponents-client | RHEL 9.0 |
|
httpcomponents-client(maven:3.5, maven:3.6), jakarta-commons-httpclient(pki-deps:10.6) | httpcomponents-client | RHEL 9.0 | |
ibus-kkc | ibus-anthy | RHEL 9.0 | |
IdM-pki-acme(pki-core:10.6) | pki-acme | RHEL 9.0 | |
IdM-pki-base(pki-core:10.6) | pki-base | RHEL 9.0 | |
IdM-pki-base-java(pki-core:10.6) | pki-base-java | RHEL 9.0 | |
IdM-pki-ca(pki-core:10.6) | pki-ca | RHEL 9.0 | |
IdM-pki-kra(pki-core:10.6) | pki-kra | RHEL 9.0 | |
IdM-pki-server(pki-core:10.6) | pki-server | RHEL 9.0 | |
IdM-pki-symkey(pki-core:10.6) | pki-symkey | RHEL 9.0 | |
IdM-pki-tools(pki-core:10.6) | pki-tools | RHEL 9.0 | |
ilmbase | imath, openexr-devel | RHEL 9.0 | |
inkscape1 | Inkscape | RHEL 9.0 | |
inkscape1-docs | inkscape-docs | RHEL 9.0 | |
inkscape1-view | Inkscape-view | RHEL 9.0 | |
ipa-client (idm:client), ipa-client (idm:DL1) | ipa-client | RHEL 9.0 | |
ipa-client-common (idm:client), ipa-client-common (idm:DL1) | ipa-client-common | RHEL 9.0 | |
ipa-client-epn (idm:client), ipa-client-epn (idm:DL1) | ipa-client-epn | RHEL 9.0 | |
ipa-client-samba (idm:client), ipa-client-samba (idm:DL1) | ipa-client-samba | RHEL 9.0 | |
ipa-common (idm:client), ipa-common (idm:DL1) | ipa-common | RHEL 9.0 | |
ipa-healthcheck-core (idm:client), ipa-healthcheck-core (idm:DL1) | ipa-healthcheck-core | RHEL 9.0 | |
ipa-selinux (idm:client), ipa-selinux (idm:DL1) | ipa-selinux | RHEL 9.0 | |
iptables, iptables-arptables, iptables-ebtables | iptables-nft | RHEL 9.0 | |
iptables-services | iptables-nft-services | RHEL 9.0 | |
istack-commons | jaxb-istack-commons | RHEL 9.0 | |
jackson-annotations(pki-deps:10.6) | pki-jackson-annotations | RHEL 9.0 | |
jackson-core (pki-deps:10.6) | pki-jackson-core | RHEL 9.0 | |
jackson-databind (pki-deps:10.6) | pki-jackson-databind | RHEL 9.0 | |
jackson-jaxrs-json-provider (pki-deps:10.6) | pki-jackson-jaxrs-json-provider | RHEL 9.0 | |
jackson-jaxrs-providers (pki-deps:10.6) | pki-jackson-jaxrs-providers | RHEL 9.0 | |
jackson-module-jaxb-annotations (pki-deps:10.6) | pki-jackson-module-jaxb-annotations | RHEL 9.0 | |
JavaMail(javapackages-tools:neutron01) | 자카르타-메일 | RHEL 9.0 |
|
jss, pki-symkey | idm-jss | RHEL 9.1 | |
kernel-abi-whitelists | kernel-abi-stablelists | RHEL 9.0 | |
khmeros-base-fonts | khmer-os-content-fonts, khmer-os-system-fonts | RHEL 9.0 | |
khmeros-battambang-fonts | khmer-os-battambang-fonts | RHEL 9.0 | |
khmeros-bokor-fonts | khmer-os-bokor-fonts | RHEL 9.0 | |
khmeros-handwritten-fonts | Khmer-os-fasthand-fonts, khmer-os-freehand-fonts | RHEL 9.0 | |
khmeros-metal-chrieng-fonts | khmer-os-metal-chrieng-fonts | RHEL 9.0 | |
khmeros-muol-fonts | Khmer-os-muol-fonts, khmer-os-muol-pali-fonts | RHEL 9.0 | |
khmeros-siemreap-fonts | khmer-os-siemreap-fonts | RHEL 9.0 | |
ldapjdk | idm-ldapjdk | RHEL 9.1 | |
libguestfs-tools(virt:rhel) | virt-win-reg | RHEL 9.0 | |
libguestfs-tools-c (virt:rhel) | guestfs-tools | RHEL 9.0 | |
libmemcached | libmemcached-awesome, libmemcached-awesome-tools | RHEL 9.0 |
|
libmemcached-devel | libmemcached-awesome-devel | RHEL 9.0 | |
libmemcached-libs | libmemcached-awesome | RHEL 9.0 | |
lorax-composer | osbuild-composer | RHEL 9.0 | |
mailx | S-nail | RHEL 9.0 |
|
Maven-artifact-resolver(javapackages-tools:✓01), maven-artifact-transfer(javapackages-tools:01) | maven-artifact-transfer | RHEL 9.0 |
|
mesa-khr-devel | libglvnd-devel | RHEL 9.0 | |
mesa-libGLES | libglvnd-gles | RHEL 9.0 | |
mesa-vulkan-devel | mesa-vulkan-drivers | RHEL 9.0 | |
메타 정보 | gnome-kiosk | RHEL 9.0 |
|
OpenEXR-libs | OpenEXR | RHEL 9.0 | |
pacemaker | pacemaker, python3-pacemaker | RHEL 9.3 | |
paratype-pt-sans-fonts | pt-sans-fonts | RHEL 9.0 | |
Perl (perl:5.24) | perl-AutoLoader, perl-autouse, perl-B, perl-base, perl-benchmark, perl-blib, perl-Class-Extensions, perl-DBM_Extensions, perl-debugger, perl-debugger, perl-deprecate, perl-diagnostics, perl-diagnostics, perl-DirHandle perl-doc, perl-DynaLoader, perl-encoding-warnings, perl-English, perl-ExtALLOWs-Constant, perl-Fcntl, perl-fields, perl-File-Basename, perl-File-Copy, perl-File-Copy, perl-File-DosGlob, perl-File-Find, perl-FileCache, perl-FileHandle, perl-filetest, perl-FindBin, perl-GDBM_File, perl-Getopt-Std, perl-Hash-Std, perl-Hash- paneHash, perl-I18Hash, perl-I18N-Collate, perl-I18N-Collate, perl-I18N-Langinfo, perl-I18N-LangTags, perl-if, perl-interpreter, perl-IPC-Open3, perl-lib, perl-libs, perl-locale, perl-meta-notation, perl-mro, perl-NDBM_File, perl-NDBM_File, perl-Net perl-NEXT, perl-ODBM_File, perl-Opcode, perl-overloading, perl-ph, perl-Pod-Functions, perl-POSIX, perl-Safe, perl-Search-Dict, perl-SelectSaver, perl-sigtrap, perl-sort, perl-sort, perl-top perl-subs, perl-Symbol, perl-Term-Complete, perl-Term-ReadLine, perl-Text-Abbrev, perl-Thread, perl-Thread-Semaphore, perl-Tie-File, perl-Tie-File, perl-Tie-Memoize, perl-Tie-Memoize, perl-Tie-RefHash, perl-Time, perl- Unicode-UCD, perl-User-pwent, perl-vars, perl-vmsish | RHEL 9.0 | |
perl-core (perl:5.24) | perl | RHEL 9.0 | |
perl-interpreter | perl-AutoLoader, perl-autouse, perl-B, perl-base, perl-benchmark, perl-blib, perl-Class-Extensions, perl-DBM_Extensions, perl-debugger, perl-debugger, perl-deprecate, perl-diagnostics, perl-diagnostics, perl-DirHandle perl-doc, perl-DynaLoader, perl-encoding-warnings, perl-English, perl-ExtALLOWs-Constant, perl-Fcntl, perl-fields, perl-File-Basename, perl-File-Copy, perl-File-Copy, perl-File-DosGlob, perl-File-Find, perl-FileCache, perl-FileHandle, perl-filetest, perl-FindBin, perl-GDBM_File, perl-Getopt-Std, perl-Hash-Std, perl-Hash- paneHash, perl-I18Hash, perl-I18N-Collate, perl-I18N-Collate, perl-I18N-Langinfo, perl-I18N-LangTags, perl-if, perl-interpreter, perl-IPC-Open3, perl-lib, perl-locale, perl-meta-notation, perl-mro, perl-NDBM_File, perl-Net, perl-Net, perl-NEXT, perl-J perl-ODBM_file, perl-Opcode, perl-overloading, perl-ph, perl-Pod-Functions, perl-POSIX, perl-Safe, perl-Search-Dict, perl-SelectSaver, perl-sigtrap, perl-sigtrap, perl-sort, perl-Symbol, perl-Symbol, perl-POSIX perl-Sys-Hostname, perl-Term-Complete, perl-Term-ReadLine, perl-Text-Abbrev, perl-Thread, perl-Thread-Semaphore, perl-Tie-File, perl-Tie-Memoize, perl-Tie-Memoize, perl-Tie-RefHash, perl-Tie-RefHash, perl-Tie-File, perl-Tie-Memoize, perl-Tie-Memoize perl- Unicode-UCD, perl-User-pwent, perl-vars, perl-vmsish | RHEL 9.0 | |
php-pecl-xdebug | php-pecl-xdebug3 | RHEL 9.0 | |
pki-acme | idm-pki-acme | RHEL 9.1 | |
pki-base | idm-pki-base | RHEL 9.1 | |
pki-base-java | idm-pki-java | RHEL 9.1 | |
pki-ca | idm-pki-ca | RHEL 9.1 | |
pki-kra | idm-pki-kra | RHEL 9.1 | |
pki-server | idm-pki-server | RHEL 9.1 | |
pki-tools | idm-pki-tools | RHEL 9.1 | |
platform-python, python2(python27:2.7), python36(python36:3.6), python38(python38:3.8), python39:3.9(python39:3.9) | python3 | RHEL 9.0 | |
platform-python-debug, python2-debug(python27:2.7), python36-debug(python36-debug), python38-debug(python38:3.8), python39-debug(python39-devel:3.9) | python3-debug | RHEL 9.0 | |
platform-python-devel, python2-devel(python27:2.7), python36-devel(python38:3.6), python38-devel, python39-devel(python39:3.9) | python3-devel | RHEL 9.0 | |
platform-python-pip, python2-pip(python27:2.7), python3-pip, python38-pip(python38:3.8), python39-pip(python39:3.9) | python3-pip | RHEL 9.0 | |
platform-python-setuptools, python2-setuptools(python27:2.7), python3-setuptools, python38-setuptools(python38:3.8), python39-setuptools(python39:3.9) | python3-setuptools | RHEL 9.0 | |
podman (container-tools:rhel8), podman-manpages (container-tools:rhel8) | podman | RHEL 9.0 | |
podman-catatonit | podman | RHEL 9.2 |
|
podman-manpages (container-tools:rhel8) | podman | RHEL 9.0 | |
postgresql-upgrade-devel(postgresql:12), postgresql-upgrade-devel(postgresql:13) | postgresql-upgrade-devel | RHEL 9.0 | |
PulseAudio | pipewire-pulseaudio | RHEL 9.0 |
obdio 서버 구현은 |
pygobject2 (gimp:2.8) | python3-gobject | RHEL 9.0 | |
pygobject2-codegen (gimp:2.8) | python3-gobject-base | RHEL 9.0 | |
pygobject2-devel (gimp:2.8) | python3-gobject-devel | RHEL 9.0 | |
pygobject3-devel | python3-gobject-devel | RHEL 9.0 | |
python2-attrs(python27:2.7), python3-attrs, python38-attrs(python38-devel:3.8), python39-attrs(python39-devel:3.9) | python3-attrs | RHEL 9.0 | |
python2-babel(python27:2.7), python3-babel, python38-babel (python38:3.8) | python3-babel | RHEL 9.0 | |
python2-chardet(python27:2.7), python38-chardet, python38:3.8), python39-chardet(python39:3.9) | python3-chardet | RHEL 9.0 | |
python2-Cython(python27:2.7), python3-Cython, python38-Cython(python38:3.8), python39-Cython(python39-devel:3.9) | python3-Cython | RHEL 9.0 | |
python2-dns (python27:2.7), python3-dns | python3-dns | RHEL 9.0 | |
python2-docutils (python27:2.7), python3-docutils | python3-docutils(python36:3.6) | RHEL 9.0 | |
python2-idna (python27:2.7), python38-idna (python38:3.8), python39-idna (python39:3.9) | python3-idna | RHEL 9.0 | |
python2-jinja2 (python27:2.7), python3-jinja2, python38-jinja2 (python38:3.8) | python3-jinja2 | RHEL 9.0 | |
python2-libs(python27:2.7), python3-libs, python38-libs(python38:3.8), python39-libs(python39:3.9) | python3-libs | RHEL 9.0 | |
python2-lxml(python27:2.7), python3-lxml, python38-lxml(python38:3.8), python39-lxml(python39:3.9) | python3-lxml | RHEL 9.0 | |
python2-markupsafe (python27:2.7), python3-markupsafe, python38-markupsafe (python38:3.8) | python3-markupsafe | RHEL 9.0 | |
python2-numpy(python27:2.7), python38-numpy(python38:3.8), python39-numpy(python39:3.9) | python3-numpy | RHEL 9.0 | |
python2-numpy-f2py(python27:2.7), python38-numpy-f2py(python38:3.8), python39-numpy-f2py(python39:3.9) | python3-numpy-f2py | RHEL 9.0 | |
python2-pip-wheel(python27:2.7), python3-pip-wheel, python38-pip-wheel(python38:3.8), python39-pip-wheel(python39:3.9) | python3-pip-wheel | RHEL 9.0 | |
python2-pluggy(python27:2.7), python3-pluggy, python38-pluggy(python38-devel:3.8), python39-pluggy(python39-devel:3.9) | python3-pluggy | RHEL 9.0 | |
python2-psycopg2 (python27:2.7), python38-psycopg2 (python38:3.8), python39-psycopg2 (python39:3.9) | python3-psycopg2 | RHEL 9.0 | |
python2-py(python27:2.7), python3-py, python38-py(python38-devel:3.8), python39-py(python39-devel:3.9) | python3-py | RHEL 9.0 | |
python2-pygments(python27:2.7), python3-pygments(python36:3.6) | python3-pygments | RHEL 9.0 | |
python2-PyMySQL(python27:2.7), python3-PyMySQL(python36:3.6), python38-PyMySQL(python38:3.8), python39-PyMySQL(python39:3.9) | python3-PyMySQL | RHEL 9.0 | |
python2-pysocks (python27:2.7), python3-pysocks, python38-pysocks (python38:3.8), python39-pysocks (python39:3.9) | python3-pysocks | RHEL 9.0 | |
python2-pytest(python27:2.7), python3-pytest, python38-pytest(python38-devel:3.8), python39-pytest(python39-devel:3.9) | python3-pytest | RHEL 9.0 | |
python2-pytz (python27:2.7), python3-pytz, python38-pytz (python38:3.8) | python3-pytz | RHEL 9.0 | |
python2-pyyaml(python27:2.7), python3-pyyaml, python38-pyyaml(python38:3.8), python39-pyyaml(python39:3.9) | python3-pyyaml | RHEL 9.0 | |
python2-requests(python27:2.7), python3-requests, python38-requests(python38:3.8), python39-requests(python39:3.9) | python3-requests | RHEL 9.0 | |
python2-rpm-macros(python27:2.7), python3-rpm-macros, python36-rpm-macros(python36:3.6), python38-rpm-macros, python39-rpm-macros(python39-rpm-macros) | python3-rpm-macros | RHEL 9.0 | |
python2-scipy(python27:2.7), python3-scipy(python36:3.6), python38-scipy(python38:3.8), python39-scipy(python39:3.9) | python3-scipy | RHEL 9.0 | |
python2-setuptools-wheel(python27:2.7), python3-setuptools-wheel, python38-setuptools-wheel(python38:3.8), python39-setuptools-wheel(python39:3.9) | python3-setuptools-wheel | RHEL 9.0 | |
python2-setuptools_scm (python27:2.7), python3-setuptools_scm | python3-setuptools_scm | RHEL 9.0 | |
python2-six(python27:2.7), python3-six, python38-six(python38:3.8), python39-six(python39:3.9) | python3-six | RHEL 9.0 | |
python2-test(python27:2.7), python3-test, python38-test(python38:3.8), python39-test(python39:3.9) | python3-test | RHEL 9.0 | |
python2-tkinter(python27:2.7), python3-tkinter, python38-tkinter(python38:3.8), python39-tkinter(python39:3.9) | python3-tkinter | RHEL 9.0 | |
python2-urllib3(python27:2.7), python3-urllib3, python38-urllib3(python38:3.8), python39-urllib3(python39:3.9) | python3-urllib3 | RHEL 9.0 | |
python2-wheel(python27:2.7), python3-wheel(python36:3.6), python38-wheel(python38:3.8), python39-wheel(python39:3.9) | python3-wheel | RHEL 9.0 | |
python2-wheel-wheel(python27:2.7), python3-wheel-wheel(python36:3.6), python38-wheel-wheel(python38:3.8), python39-wheel-wheel(python39:3.9) | python3-wheel-wheel | RHEL 9.0 | |
python3-idle, python38-idle(python38:3.8), python39-idle(python39:3.9) | python3-idle | RHEL 9.0 | |
python3-idm-pki (pki-core:10.6) | python3-pki | RHEL 9.0 | |
python3-ipaclient(idm:client), python3-ipaclient(idm:DL1) | python3-ipaclient | RHEL 9.0 | |
python3-ipalib (idm:client), python3-ipalib (idm:DL1) | python3-ipalib | RHEL 9.0 | |
python3-jwcrypto (idm:client), python3-jwcrypto (idm:DL1) | python3-jwcrypto | RHEL 9.0 | |
python3-magic | python3-file-magic | RHEL 9.0 | |
python3-packaging, python38-packaging (python38-devel:3.8), python39-packaging (python39-devel:3.9) | python3-packaging | RHEL 9.0 | |
python3-pki | python3-idm-pki | RHEL 9.1 | |
python3-pyparsing, python38-pyparsing (python38-devel:3.8), python39-pyparsing (python39-devel:3.9) | python3-pyparsing | RHEL 9.0 | |
python3-pyusb (idm:client), python3-pyusb (idm:DL1) | python3-pyusb | RHEL 9.0 | |
python3-qrcode (idm:DL1, idm:client) | python3-qrcode-core | RHEL 9.0 | |
python3-yubico (idm:client), python3-yubico (idm:DL1) | python3-yubico | RHEL 9.0 | |
python38-cffi(python38:3.8), python39-cffi(python39:3.9) | python3-cffi | RHEL 9.0 | |
python38-cryptography(python38:3.8), python39-cryptography(python39:3.9) | python3-cryptography | RHEL 9.0 | |
python38-mod_wsgi (python38:3.8), python39-mod_wsgi (python39:3.9) | python3-mod_wsgi | RHEL 9.0 | |
python38-ply(python38:3.8), python39-ply(python39:3.9) | python3-ply | RHEL 9.0 | |
python38-psutil(python38:3.8), python39-psutil(python39:3.9) | python3-psutil | RHEL 9.0 | |
python38-pycparser(python38:3.8), python39-pycparser(python39:3.9) | python3-pycparser | RHEL 9.0 | |
python38-wcwidth(python38-devel:3.8), python39-wcwidth(python39-devel:3.9) | python3-wcwidth | RHEL 9.0 | |
python39-iniconfig(python39-devel:3.9) | python3-iniconfig | RHEL 9.0 | |
python39-toml (python39:3.9) | python3-toml | RHEL 9.0 | |
qatlib | ECDHEtlib,ECDHEtlib-service | RHEL 9.1 | |
qemu-kvm | ksmtuned, qemu-kvm | RHEL 9.0 | |
qemu-kvm-common (virt:rhel) | qemu-kvm-common, virtiofsd | RHEL 9.0 | |
resource-agents-aliyun, resource-agents-gcp | resource-agents-cloud | RHEL 9.0 | |
RESTEasy(pki-deps:10.6) | pki-resteasy-client, pki-resteasy-core, pki-resteasy-jackson2-provider, pki-resteasy-jaxb-provider | RHEL 9.0 | |
rng-tools | jitterentropy, jitterentropy-devel, rng-tools | RHEL 9.0 | |
rpm | rpm, rpm-plugin-audit | RHEL 9.0 | |
rpm-build-libs | rpm-build-libs, rpm-sign-libs | RHEL 9.0 | |
rsyslog | rsyslog, rsyslog-logrotate | RHEL 9.0 | |
rt-setup | realtime-setup | RHEL 9.0 | |
rt-setup | realtime-setup | RHEL 9.0 | |
rt-tests | realtime-tests | RHEL 9.0 | |
ruby-irb (ruby:2.5) | rubygem-irb | RHEL 9.0 | |
rubygem-did_you_mean (ruby:2.5, ruby:2.6) | ruby-default-gems | RHEL 9.0 | |
rubygem-openssl (ruby:2.5, ruby:2.6, ruby:2.7) | ruby-default-gems | RHEL 9.0 | |
SDL | sdl12-compat | RHEL 9.0 | |
SDL-devel | sdl12-compat-devel | RHEL 9.0 | |
texlive-ifetex, texlive-ifluatex, texlive-ifxetex | texlive-iftex | RHEL 9.0 | |
texlive-tetex | texlive-texlive-scripts | RHEL 9.0 | |
tomcatjss | idm-tomcatjss | RHEL 9.1 | |
trace-cmd | libtracecmd, libtracecmd-devel, trace-cmd | RHEL 9.0 | |
Vala-devel | libvala-devel | RHEL 9.0 | |
jdsim | cdrskin | RHEL 9.0 |
|
xfsprogs | xfsprogs, xfsprogs-xfs_scrub | RHEL 9.0 | |
xinetd | systemd | RHEL 9.0 |
|
xorg-x11-font-utils | mkfontscale | RHEL 9.0 | |
xorg-x11-xkb-utils | setxkbmap, xkbcomp | RHEL 9.0 |
A.3. 이동된 패키지
다음 패키지는 RHEL 9 내의 리포지토리 간에 이동되었습니다.
패키지 | 원본 리포지터리* | 현재 리포지터리* | 이후 변경됨 |
---|---|---|---|
aajohan-comfortaa-fonts | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
adobe-source-code-pro-fonts | rhel9-AppStream | rhel9-BaseOS | RHEL 9.2 |
alsa-sof-firmware | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
ant | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
ant-antlr | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
ant-apache-bcel | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
ant-apache-bsf | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
ant-apache-oro | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
ant-apache-regexp | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
ant-apache-resolver | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
ant-apache-xalan2 | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
ant-commons-logging | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
ant-commons-net | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
ant-javamail | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
ant-jdepend | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
ant-jmf | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
ant-jsch | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
at-junit | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
ant-lib | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
ant-swing | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
ant-testutil | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
ant-xz | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
ANTLR-tool | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
apache-commons-cli | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
apache-commons-codec | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
apache-commons-collections | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
apache-commons-compress | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
apache-commons-io | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
apache-commons-lang3 | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
apache-commons-logging | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
apache-commons-net | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
aspell | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
assertj-core | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
AtInject | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
Atlas-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
atlas-z14 | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
audit-libs-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
augeas | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
augeas-libs | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
autoconf-archive | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
avahi-glib | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
bcel | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
bind-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
blktrace | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
bluez-obexd | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
boom-boot | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
boom-boot-conf | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
boom-boot-grub2 | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
boost-numpy3 | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
boost-python3 | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
Brotli | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
bsdtar | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
BSF | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
bzip2-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
c-ares-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
cdi-api | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
checkpolicy | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
conntrack-tools | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
createrepo_c-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
criu-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
criu-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
cryptsetup-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
ctdb | rhel8-BaseOS | rhel9-ResilientStorage | RHEL 9.0 |
Cyrus-sasl-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
cyrus-sasl-gs2 | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
cyrus-sasl-ldap | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
cyrus-sasl-md5 | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
cyrus-sasl-ntlm | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
daxctl | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
dbus-daemon | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
dbus-glib | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
dlm-lib | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
dracut-caps | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
dracut-live | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
dtc | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
Dwarves | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
e2fsprogs-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
efivar | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
elfutils-debuginfod | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
elfutils-debuginfod-client-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
elfutils-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
elfutils-libelf-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
emacs-filesystem | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
evolution-data-server-doc | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
evolution-data-server-perl | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
evolution-data-server-tests | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
expat-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
expect | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
fence-agents-all | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-all | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-amt-ws | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-amt-ws | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-apc | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-apc | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-apc-snmp | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-apc-snmp | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-bladecenter | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-bladecenter | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-brocade | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-brocade | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-cisco-mds | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-cisco-mds | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-cisco-ucs | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-cisco-ucs | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-drac5 | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-drac5 | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-eaton-snmp | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-eaton-snmp | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-emerson | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-emerson | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-eps | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-eps | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-heuristics-ping | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-heuristics-ping | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-hpblade | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-hpblade | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-ibmblade | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-ibmblade | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-ifmib | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-ifmib | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-ilo-moonshot | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-ilo-moonshot | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-ilo-mp | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-ilo-mp | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-ilo-ssh | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-ilo-ssh | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-ilo2 | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-ilo2 | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-intelmodular | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-intelmodular | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-ipdu | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-ipdu | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-ipmilan | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-ipmilan | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-kdump | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-kdump | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-lpar | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-lpar | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-mpath | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-mpath | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-redfish | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-redfish | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-rhevm | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-rhevm | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-rsa | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-rsa | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-rsb | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-rsb | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-sbd | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-sbd | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-scsi | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-scsi | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-vmware-rest | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-vmware-rest | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-vmware-soap | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-vmware-soap | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-wti | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-wti | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
fence-agents-zvm | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
fence-agents-zvm | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
flite | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
fontconfig | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
fontconfig-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
freeipmi | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
freeipmi-bmc-watchdog | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
freeipmi-ipmidetectd | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
freeipmi-ipmiseld | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
FreeType-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
fstrm-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
Fuse-devel | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
fuse3 | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
fuse3-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
fuse3-libs | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
fxload | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
Galera | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
gdbm | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
gdbm-devel | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
gdisk | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
gdk-pixbuf2 | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
geoclue2-demos | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
gettext-common-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
gettext-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
gfs2-utils | rhel8-BaseOS | rhel9-ResilientStorage | RHEL 9.0 |
ghostscript-doc | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
ghostscript-tools-dvipdf | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
glib2-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
glib2-doc | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
glib2-tests | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
glibc-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
glibc-gconv-extra | rhel8-AppStream | rhel9-BaseOS | RHEL 9.0 |
glibc-headers | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
glibc-locale-source | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
glusterfs | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
glusterfs-client-xlators | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
glusterfs-fuse | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
glusterfs-libs | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
glusterfs-rdma | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
gmp-c++ | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
gmp-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
gnome-common | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
GNU-efi | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
gnupg2-smime | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
gobject-introspection-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
Google-guice | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
google-roboto-slab-fonts | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
gperf | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
gpgmepp | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
graphviz-doc | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
graphviz-python3 | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
Groff | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
gsl-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
gsl-devel | rhel9-CRB | rhel9-AppStream | RHEL 9.1 |
gtkspell3 | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
Hamcrest | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
hivex | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
hivex-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
httpcomponents-client | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
httpcomponents-core | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
hwloc-devel | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
하이픈 개발 | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
ICU | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
InfiniBand-diags | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
ipset-service | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
iptables-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
iputils-ninfod | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
Jakarta-oro | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
jansi | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
jansson-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
javapackages-filesystem | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
javapackages-tools | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
jcl-over-slf4j | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
jdepend | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
jmc-core | rhel9-AppStream | rhel9-CRB | RHEL 9.2 |
jsch | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
json-c-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
jsoup | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
jsr-305 | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
Judy | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
JUnit | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
jzlib | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
kabi-dw | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
kbd-legacy | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
kbd-legacy | rhel9-AppStream | rhel9-BaseOS | RHEL 9.3 |
kernel-cross-headers | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
kernel-debug-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
kernel-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
kernel-doc | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
kernel-headers | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
kernel-zfcpdump-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
keyutils-libs-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
krb5-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
ksc | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
lcms2-devel | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libacl-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libaio-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libappstream-glib | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libasan | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libatomic_ops | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libattr-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libbabeltrace | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libblkid-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libcap-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libcap-ng-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libcap-ng-python3 | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libcom_err-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libcurl-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libdatrie-devel | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libdb-utils | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libdwarves1 | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libedit-devel | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
liberation-fonts | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
liberation-fonts-common | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
liberation-mono-fonts | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
liberation-narrow-fonts | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
liberation-sans-fonts | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
liberation-serif-fonts | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libev | rhel8-AppStream | rhel9-BaseOS | RHEL 9.0 |
libevent-doc | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libfabric | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libfdisk-devel | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
libffi-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libgcrypt-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libgomp-offload-nvptx | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libgpg-error-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libgudev-devel | rhel9-CRB | rhel9-AppStream | RHEL 9.3 |
libguestfs-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libguestfs-gobject | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libguestfs-gobject-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libguestfs-man-pages-ja | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libguestfs-man-pages-uk | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libguestfs-winsupport | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libica-devel | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
libical | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libicu-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libiscsi | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libiscsi-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libiscsi-utils | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libitm | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libjose-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libkeepalive | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libldb-devel | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
liblockfile | rhel9-AppStream | rhel9-BaseOS | RHEL 9.1 |
liblsan | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libluksmeta-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libmaxminddb-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libmicrohttpd | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libmng-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libmount-devel | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libnbd | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libnbd-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libnetfilter_cthelper | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libnetfilter_cttimeout | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libnetfilter_queue | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libnl3-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libnsl2 | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libocxl | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libogg-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libpmem-debug | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libpmemblk-debug | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libpmemlog-debug | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libpmemobj-debug | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libpmempool-debug | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libpng-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libpsl-devel | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libpsm2 | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libqb | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libqb-devel | rhel8-BaseOS | rhel9-ResilientStorage | RHEL 9.0 |
libqb-devel | rhel8-BaseOS | rhel9 HighAvailability | RHEL 9.0 |
librabbitmq | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
librtas-devel | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
libsecret | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libsecret-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libselinux-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libsepol-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libservicelog-devel | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
libslirp-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libslirp-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libslirp-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libsoup | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libstemmer | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libstoragemgmt | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libstoragemgmt-arcconf-plugin | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libstoragemgmt-hpsa-plugin | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libstoragemgmt-local-plugin | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libstoragemgmt-megaraid-plugin | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libstoragemgmt-smis-plugin | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libstoragemgmt-udev | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libtalloc-devel | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
libtdb-devel | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
libtevent-devel | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
libthai-devel | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libtirpc-devel | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
libtool-ltdl | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libtool-ltdl-devel | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
libtool-ltdl-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libtool-ltdl-devel | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
libtsan | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libubsan | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
liburing | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libusb | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libusbx-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libuuid-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libverto-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libvirt | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libvirt-client | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libvirt-daemon | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libvirt-daemon-config-network | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libvirt-daemon-config-nwfilter | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libvirt-daemon-driver-interface | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libvirt-daemon-driver-network | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libvirt-daemon-driver-nodedev | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libvirt-daemon-driver-nwfilter | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libvirt-daemon-driver-secret | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libvirt-daemon-driver-storage | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libvirt-daemon-driver-storage-core | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libvirt-daemon-driver-storage-disk | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libvirt-daemon-driver-storage-iscsi | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libvirt-daemon-driver-storage-logical | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libvirt-daemon-driver-storage-mpath | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libvirt-daemon-driver-storage-scsi | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libvirt-dbus | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libvirt-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libvirt-docs | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libvirt-libs | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libvirt-lock-sanlock | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libvirt-nss | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
libwinpr-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libxcrypt-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libxslt | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libXxf86vm-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libzfcphbaapi-docs | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
libzip-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libzip-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libzip-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libzip-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
libzstd-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
lksctp-tools-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
lksctp-tools-doc | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
lm_sensors | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
lm_sensors-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
lm_sensors-libs | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
logwatch | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
Lua-guestfs | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
Lua-posix | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
lvm2-dbusd | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
lvm2-lockd | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
Lynx | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
lz4-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
lzo-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
lzo-minilzo | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
m4 | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
mariadb | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
mariadb-backup | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
mariadb-common | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
mariadb-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
mariadb-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
mariadb-embedded | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
mariadb-embedded-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
mariadb-embedded-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
mariadb-errmsg | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
mariadb-gssapi-server | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
mariadb-oqgraph-engine | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
mariadb-server | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
mariadb-server-galera | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
mariadb-server-utils | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
mariadb-test | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
mariadb-test | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
Maven | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
maven-lib | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
Maven-resolver | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
maven-shared-utils | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
Maven-wagon | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
memstrack | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
memtest86+ | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
mesa-libgbm-devel | rhel9-CRB | rhel9-AppStream | RHEL 9.3 |
mesa-libOSMesa | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
mobile-broadband-provider-info | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
multilib-rpm-config | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
mvapich2-psm2-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
mysql-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
mysql-libs | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
mysql-test | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
nbdfuse | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
nbdkit-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
nbdkit-example-plugins | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
ncurses-c++-libs | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
ncurses-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
ncurses-term | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
net-snmp-libs | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
NetworkManager-config-connectivity-redhat | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
NetworkManager-dispatcher-routing-rules | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
NetworkManager-ovs | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
NetworkManager-ppp | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
nginx-mod-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
nispor-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
nss_db | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
ntsysv | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
numactl-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
objectweb-asm | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
opa-address-resolution | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
opa-basic-tools | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
opa-fastfabric | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
opa-fm | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
opa-libopamgt | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
Opal-firmware | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
opal-utils | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
openblas-openmp | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
openblas-threads | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
OpenCL 헤더 | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
opencsd | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
OpenIPMI | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
OpenIPMI-lanserv | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
OpenIPMI-libs | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
openldap-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
openssl-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
openssl-perl | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
openwsman-client | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
openwsman-python3 | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
openwsman-python3 | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
opus-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
ostree-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
owasp-java-encoder | rhel9-AppStream | rhel9-CRB | RHEL 9.2 |
p11-kit-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
p11-kit-server | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
pacemaker-cluster-libs | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
pacemaker-cluster-libs | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
pacemaker-libs | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
pacemaker-libs | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
Pacemaker-schemas | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
Pacemaker-schemas | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
PAM-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
pam_cifscreds | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
pam_ssh_agent_auth | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
patch | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
pciutils-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
pcre-cpp | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
pcre-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
pcre-utf16 | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
pcre-utf32 | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
pcre2-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
pcre2-utf16 | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
pcre2-utf32 | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perf | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Algorithm-Diff | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Archive-Tar | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Carp | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perlone | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
perl-Compress-Raw-Bzip2 | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Compress-Raw-Zlib | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-constant | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Data-Dumper | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Date-Manip | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-DBD-SQLite | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-DBI | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Digest-SHA1 | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
perl-Errno | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-exporter | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-exporter-Tiny | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
perl-File-Path | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-File-Temp | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Getopt-Long | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-hivex | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
perl-HTTP-Tiny | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Importer | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
perl-interpreter | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-IO | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-IO-Compress | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-IO-String | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
perl-IO-Zlib | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-libs | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-List-MoreUtils | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
perl-List-MoreUtils-XS | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
perl-macros | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Math-Complex | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-MIME-Base64 | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-MIME-Charset | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
perl-Module-Pluggable | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
perl-Module-Runtime | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
perl-parent | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Parse-Yapp | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
perl-PathTools | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Pod-Escapes | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Pod-Parser | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
perl-Pod-Parser | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
perl-Pod-Parser | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
perl-Pod-Parser | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
perl-Pod-Perldoc | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Pod-Simple | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Pod-Usage | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-podlators | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Scalar-List-Utils | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Socket | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Storable | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Sys-CPU | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Sys-MemInfo | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Term-ANSIColor | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Term-Cap | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Term-Size-Any | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
perl-Term-Size-Perl | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
perl-Term-Table | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
perl-텍스트-Diff | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Text-ParseWords | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-텍스트-Tabs+Wrap | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-threads | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-threads-shared | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Time-Local | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
perl-Unicode-LineBreak | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
perl-Unicode-Normalize | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
plexus-cipher | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
plexus-classworlds | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
plexus-containers-component-annotations | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
plexus-interpolation | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
plexus-sec-dispatcher | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
plexus-utils | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
plotutils | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
pmix-devel | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
policycoreutils-dbus | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
policycoreutils-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
policycoreutils-python-utils | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
polkit-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
polkit-docs | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
poppler-cpp | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
poppler-qt5 | rhel9-CRB | rhel9-AppStream | RHEL 9.1 |
popt-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
postfix | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
postgresql-server-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
postgresql-server-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
postgresql-server-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
postgresql-server-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
postgresql-test | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
postgresql-test | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
postgresql-test | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
postgresql-test | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
powerpc-utils | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
ppc64-diag | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
protobuf-c | rhel8-AppStream | rhel9-BaseOS | RHEL 9.0 |
protobuf-c-compiler | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
protobuf-c-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
protobuf-compiler | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
ps_mem | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
publicsuffix-list | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
python-cups-doc | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
python3-audit | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
python3-boom | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
python3-cffi | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
python3-cffi | rhel9-AppStream | rhel9-BaseOS | RHEL 9.2 |
python3-configobj | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
python3-cryptography | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
python3-cryptography | rhel9-AppStream | rhel9-BaseOS | RHEL 9.2 |
python3-docutils | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
python3-gobject-base | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
python3-hivex | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
python3-idle | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
python3-iniconfig | rhel9-CRB | rhel9-AppStream | RHEL 9.2 |
python3-ipatests | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
python3-iscsi-initiator-utils | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
python3-libnbd | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
python3-libproxy | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
python3-libselinux | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
python3-libsemanage | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
python3-libstoragemgmt | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
python3-libvirt | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
python3-oauthlib | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
python3-packaging | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
python3-pexpect | rhel8-AppStream | rhel9-BaseOS | RHEL 9.0 |
python3-pluggy | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
python3-pluggy | rhel9-CRB | rhel9-AppStream | RHEL 9.2 |
python3-ply | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
python3-ply | rhel9-AppStream | rhel9-BaseOS | RHEL 9.2 |
python3-policycoreutils | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
python3-ptyprocess | rhel8-AppStream | rhel9-BaseOS | RHEL 9.0 |
python3-pwquality | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
python3-py | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
python3-py | rhel9-CRB | rhel9-AppStream | RHEL 9.2 |
python3-pycparser | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
python3-pycparser | rhel9-AppStream | rhel9-BaseOS | RHEL 9.2 |
python3-pygments | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
python3-pytest | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
python3-pytest | rhel9-CRB | rhel9-AppStream | RHEL 9.2 |
python3-pyverbs | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
python3-pywbem | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
python3-requests-oauthlib | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
python3-rtslib | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
python3-solv | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
python3-test | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
python3-test | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
python3-wcwidth | rhel9-CRB | rhel9-AppStream | RHEL 9.1 |
python3-wheel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
python3-wheel-wheel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
qclib | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
qclib-devel | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
qgpgme | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
qt5-qtquickcontrols2-devel | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
qt5-qtserialbus-devel | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
qt5-qtwayland-devel | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
quota-doc | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
quota-nld | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
quota-rpc | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
quota-warnquota | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
rasdaemon | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
rdma-core-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
readline-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
redhat-indexhtml | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
redhat-logos | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
redhat-logos-httpd | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
regexp | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
rpcgen | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
rpm-apidocs | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
rpm-cron | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
rpm-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
rpm-plugin-ima | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
rpm-plugin-syslog | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
rpm-plugin-systemd-inhibit | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
rsync-daemon | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
ruby-doc | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
ruby-doc | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
ruby-doc | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
ruby-doc | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
ruby-hivex | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
ruby-libguestfs | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
rubygem-mysql2-doc | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
rubygem-mysql2-doc | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
rubygem-mysql2-doc | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
rubygem-mysql2-doc | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
rubygem-pg-doc | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
rubygem-pg-doc | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
rubygem-pg-doc | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
rubygem-pg-doc | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
s390utils-base | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
samba-client | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
samba-krb5-printing | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
samba-pidl | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
samba-test | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
samba-test-libs | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
samba-winbind-clients | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
samba-winbind-krb5-locator | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
samba-winexe | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
sbd | rhel8-AppStream | rhel9-ResilientStorage | RHEL 9.0 |
sbd | rhel8-AppStream | rhel9 HighAvailability | RHEL 9.0 |
SDL2 | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
SDL2-devel | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
selinux-policy-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
sendmail-milter | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
sgabios | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
sgml-common | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
sgpio | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
shim-unsigned-aarch64 | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
slf4j | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
slf4j-jdk14 | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
SMC-tools | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
sombok | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
speech-dispatcher-doc | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
spice-protocol | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
SQLite | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
sqlite-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
supermin-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
swig | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
swig | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
swig-doc | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
swig-doc | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
swig-gdb | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
swig-gdb | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
syslinux-tftpboot | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
systemd-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
systemd-journal-remote | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
target-restore | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
TCL | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
TCL-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
tcl-doc | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
tix | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
tmpwatch | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
tpm2-abrmd | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
tpm2-abrmd-selinux | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
tpm2-tss-devel | rhel8-BaseOS | rhel9-CRB | RHEL 9.0 |
tuned-profiles-atomic | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
tuned-profiles-mssql | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
tuned-profiles-oracle | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
turbojpeg | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
unixODBC-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
usbredir-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
uuidd | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
varnish-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
속도 | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
vhostmd | rhel8-AppStream | rhel9-SAP-솔루션 | RHEL 9.0 |
vhostmd | rhel8-AppStream | rhel9-SAP-NetWeaver | RHEL 9.0 |
vim-filesystem | rhel8-AppStream | rhel9-BaseOS | RHEL 9.0 |
virt-v2v-man-pages-ja | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
virt-v2v-man-pages-uk | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
vm-dump-metrics | rhel8-BaseOS | rhel9-SAP-솔루션 | RHEL 9.0 |
vm-dump-metrics | rhel8-BaseOS | rhel9-SAP-NetWeaver | RHEL 9.0 |
volume_key-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
워치독 | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
web-assets-filesystem | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
xalan-j2 | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
xerces-j2 | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
xfsprogs-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
xhtml1-dtds | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
xml-common | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
xml-commons-apis | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
xml-commons-resolver | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
xmlrpc-c | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
xmlrpc-c-client | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
xorg-x11-drv-evdev-devel | rhel8-AppStream | rhel9-CRB | RHEL 9.0 |
xz-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
xz-java | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
xz-lzma-compat | rhel8-CRB | rhel9-AppStream | RHEL 9.0 |
zlib-devel | rhel8-BaseOS | rhel9-AppStream | RHEL 9.0 |
zstd | rhel8-AppStream | rhel9-BaseOS | RHEL 9.0 |
* 이 표는 리포지토리 ID에 약어 이름을 사용합니다. 다음 예제를 사용하여 전체 리포지토리 ID를 식별하는 데 도움이 됩니다. 여기서 <arch> 는 특정 아키텍처입니다.
- rhel9-BaseOS: rhel-9-for-<arch>-baseos-rpms, rhel-9-for-<arch>-baseos-eus-rpms, rhel-9-for-<arch>-baseos-e4s-rpms.
- rhel9-AppStream: rhel-9-for-<arch>-appstream-rpms, rhel-9-for-<arch>-appstream-eus-rpms, rhel-9-for-<arch>-appstream-e4s-rpms.
- rhel9-CRB: codeready-builder-for-rhel-9-<arch>-rpms, codeready-builder-for-rhel-9-<arch>-eus-rpms.
- rhel9-SAP-Solutions: rhel-9-for-<arch>-sap-solutions-rpms, rhel-9-for-<arch>-sap-solutions-eus-rpms, rhel-9-for-<arch>-sap-solutions-e4s-rpms.
- rhel9-SAP-NetWeaver: rhel-9-for-<arch>-sap-netweaver-rpms, rhel-9-for-<arch>-sap-netweaver-eus-rpms, rhel-9-for-<arch>-sap-netweaver-e4s-rpms.
A.4. 제거된 패키지
다음 패키지는 RHEL 8의 일부이지만 RHEL 9에서는 배포되지 않습니다.
패키지 | 참고 |
---|---|
ABRT | |
abrt-addon-ccpp | |
abrt-addon-kerneloops | |
abrt-addon-pstoreoops | |
abrt-addon-vmcore | |
abrt-addon-xorg | |
abrt-cli | |
abrt-console-notification | |
abrt-dbus | |
abrt-desktop | |
abrt-gui | |
abrt-gui-libs | |
abrt-libs | |
abrt-tui | |
adobe-source-sans-pro-fonts-3.02803.el9.noarch.rpm | |
alsa-plugins-pulseaudio | |
alsa-sof-firmware-debug | |
Amanda | |
amanda-client | |
amanda-libs | |
amanda-server | |
ant-apache-log4j | |
ant-contrib | |
ant-contrib-javadoc | |
ant-javadoc | |
ant-manual | |
ANTLR-C++ | |
antlr-javadoc | |
aNTLR-manual | |
antlr3 | |
antlr32 | |
Aopalliance | |
Aopalliance | |
aopalliance-javadoc | |
apache-commons-beanutils-javadoc | |
apache-commons-cli-javadoc | |
apache-commons-codec-javadoc | |
apache-commons-collections-javadoc | |
apache-commons-collections-testframework | |
apache-commons-compress-javadoc | |
apache-commons-exec | |
apache-commons-exec-javadoc | |
apache-commons-io-javadoc | |
apache-commons-jxpath | |
apache-commons-jxpath | |
apache-commons-jxpath-javadoc | |
apache-commons-lang-javadoc | |
apache-commons-lang3-javadoc | |
apache-commons-logging-javadoc | |
apache-commons-net-javadoc | |
apache-commons-parent | |
apache-ivy | |
apache-ivy-javadoc | |
apache-parent | |
apache-resource-bundles | |
apache-sshd | |
apiguardian | |
aqute-bnd-javadoc | |
aspnetcore-runtime-3.0 | |
aspnetcore-runtime-3.1 | |
aspnetcore-runtime-5.0 | |
aspnetcore-targeting-pack-3.0 | |
aspnetcore-targeting-pack-3.1 | |
aspnetcore-targeting-pack-5.0 | |
assertj-core-javadoc | |
atinject-javadoc | |
atinject-tck | |
authd | |
auto | |
autoconf213 | |
autogen | |
autogen-libopts | |
autogen-libopts-devel | |
awscli | |
base64coder | |
문제 해결 | |
batik-css | |
batik-util | |
bcel-javadoc | |
bea-stax | |
bea-stax-api | |
beust-jcommander-javadoc | |
bind-export-devel | |
bind-export-libs | |
bind-pkcs11 |
|
bind-pkcs11-devel | |
bind-pkcs11-libs | |
bind-pkcs11-utils | |
bind-sdb | |
bind-sdb-chroot | |
bluez-hid2hci | |
bnd-maven-plugin | |
boost-jam | |
boost-signals | |
bouncycastle | |
bpg-algeti-fonts | |
bpg-chveulebrivi-fonts | |
bpg-classic-fonts | |
bpg-courier-fonts | |
bpg-courier-s-fonts | |
bpg-dedaena-block-fonts | |
bpg-dejavu-sans-fonts | |
bpg-elite-fonts | |
bpg-excelsior-caps-fonts | |
bpg-excelsior-condenced-fonts | |
bpg-excelsior-fonts | |
bpg-fonts-common | |
bpg-glaho-fonts | |
bpg-gorda-fonts | |
bpg-ingiri-fonts | |
bpg-irubaqidze-fonts | |
bpg-mikhail-stephan-fonts | |
bpg-mrgvlovani-caps-fonts | |
bpg-mrgvlovani-fonts | |
bpg-nateli-caps-fonts | |
bpg-nateli-condenced-fonts | |
bpg-nateli-fonts | |
bpg-nino-medium-cond-fonts | |
bpg-nino-medium-fonts | |
bpg-sans-fonts | |
bpg-sans-medium-fonts | |
bpg-sans-modern-fonts | |
bpg-sans-regular-fonts | |
bpg-serif-fonts | |
bpg-serif-modern-fonts | |
bpg-ucnobi-fonts | |
brlapi-java | |
bsf-javadoc | |
bSH | |
bsh-javadoc | |
BSH-manual | |
buildnumber-maven-plugin | |
byaccj | |
byaccj-debuginfo | |
byaccj-debugsource | |
cal10n | |
cal10n-javadoc | |
CBI-plugins | |
cdi-api-javadoc | |
cdparanoia | |
cdparanoia-devel | |
cdparanoia-libs | |
cdrdao | |
celt051 | |
celt051-devel | |
cglib-javadoc | |
clutter-devel | |
clutter-doc | |
clutter-gst3-devel | |
clutter-gtk-devel | |
cmirror | |
Codehaus-parent | |
CodeModel | |
cogl-devel | |
cogl-doc | |
compat-exiv2-026 | |
compat-guile18 | |
compat-guile18-devel | |
compat-hwloc1 | |
compat-libpthread-nonshared | |
compat-libtiff3 | |
compat-openssl10 | |
compat-sap-c++-10 | |
compat-sap-c++-11 | |
compat-sap-c++-9 | |
crash-ptdump-command | |
CTags | |
ctags-etags | |
custodia | |
cyrus-imapd-vzic | |
dbus-c++ | |
dbus-c++-devel | |
dbus-c++-glib | |
dbxtool | |
dhcp-libs | |
directory-maven-plugin | |
directory-maven-plugin-javadoc | |
dirsplit | |
dleyna-connector-dbus | |
dleyna-core | |
dleyna-renderer | |
dleyna-server | |
dnf-plugin-spacewalk | |
dnssec-trigger | |
dnssec-trigger-panel | |
dotnet-apphost-pack-3.0 | |
dotnet-apphost-pack-3.1 | |
dotnet-apphost-pack-5.0 | |
dotnet-build-reference-packages | |
dotnet-host-fxr-2.1 | |
dotnet-hostfxr-3.0 | |
dotnet-hostfxr-3.1 | |
dotnet-hostfxr-5.0 | |
dotnet-runtime-2.1 | |
dotnet-runtime-3.0 | |
dotnet-runtime-3.1 | |
dotnet-runtime-5.0 | |
dotnet-sdk-2.1 | |
dotnet-sdk-2.1.5xx | |
dotnet-sdk-3.0 | |
dotnet-sdk-3.1 | |
dotnet-sdk-3.1-source-built-artifacts | |
dotnet-sdk-5.0 | |
dotnet-sdk-5.0-source-built-artifacts | |
dotnet-targeting-pack-3.0 | |
dotnet-targeting-pack-3.1 | |
dotnet-targeting-pack-5.0 | |
dotnet-templates-3.0 | |
dotnet-templates-3.1 | |
dotnet-templates-5.0 | |
dotnet5.0-build-reference-packages | |
dptfxtract | |
drpm | |
drpm-devel | |
dump |
|
dvd+rw-tools | |
dyninst-static | |
easymock-javadoc | |
eclipse-ecf | |
eclipse-ecf-core | |
eclipse-ecf-runtime | |
eclipse-emf | |
eclipse-emf-core | |
eclipse-emf-runtime | |
eclipse-emf-xsd | |
eclipse-equinox-osgi | |
eclipse-jdt | |
eclipse-license | |
eclipse-p2-discovery | |
eclipse-pde | |
eclipse-platform | |
eclipse-swt | |
ed25519-java | |
ee4j-parent | |
elfutils-devel-static | |
elfutils-libelf-devel-static | |
eNCA | |
eNCA-devel | |
environment-modules-compat | |
evince-browser-plugin | |
exec-maven-plugin | |
exec-maven-plugin-javadoc | |
farstream02 | |
felix-gogo-command | |
felix-gogo-runtime | |
felix-gogo-shell | |
Felix-osgi-compendium | |
felix-osgi-compendium-javadoc | |
Felix-osgi-core | |
felix-osgi-core-javadoc | |
felix-osgi-foundation | |
felix-osgi-foundation-javadoc | |
Felix-parent | |
felix-scr | |
felix-utils-javadoc | |
file-roller | |
fipscheck | |
fipscheck-devel | |
fipscheck-lib | |
fonts-tweak-tool | |
Forge-parent | |
freeradius-mysql | |
freeradius-perl | |
freeradius-postgresql | |
freeradius-sqlite | |
freeradius-unixODBC | |
frei0r-devel | |
frei0r-plugins | |
frei0r-plugins-opencv | |
fuse-sshfs | |
fusesource-pom | |
미래 | |
gamin | |
gamin-devel | |
gavl | |
gcc-toolset-10 | |
gcc-toolset-10-annobin | |
gcc-toolset-10-binutils | |
gcc-toolset-10-binutils-devel | |
gcc-toolset-10-build | |
gcc-toolset-10-dwz | |
gcc-toolset-10-dyninst | |
gcc-toolset-10-dyninst-devel | |
gcc-toolset-10-elfutils | |
gcc-toolset-10-elfutils-debuginfod-client | |
gcc-toolset-10-elfutils-debuginfod-client-devel | |
gcc-toolset-10-elfutils-devel | |
gcc-toolset-10-elfutils-libelf | |
gcc-toolset-10-elfutils-libelf-devel | |
gcc-toolset-10-elfutils-libs | |
gcc-toolset-10-gcc | |
gcc-toolset-10-gcc-c++ | |
gcc-toolset-10-gcc-gdb-plugin | |
gcc-toolset-10-gcc-gfortran | |
gcc-toolset-10-gcc-plugin-devel | |
gcc-toolset-10-gdb | |
gcc-toolset-10-gdb-doc | |
gcc-toolset-10-gdb-gdbserver | |
gcc-toolset-10-libasan-devel | |
gcc-toolset-10-libatomic-devel | |
gcc-toolset-10-libitm-devel | |
gcc-toolset-10-liblsan-devel | |
gcc-toolset-10-libquadmath-devel | |
gcc-toolset-10-libstdc++-devel | |
gcc-toolset-10-libstdc++-docs | |
gcc-toolset-10-libtsan-devel | |
gcc-toolset-10-libubsan-devel | |
gcc-toolset-10-ltrace | |
gcc-toolset-10-make | |
gcc-toolset-10-make-devel | |
gcc-toolset-10-perftools | |
gcc-toolset-10-runtime | |
gcc-toolset-10-strace | |
gcc-toolset-10-systemtap | |
gcc-toolset-10-systemtap-client | |
gcc-toolset-10-systemtap-devel | |
gcc-toolset-10-systemtap-initscript | |
gcc-toolset-10-systemtap-runtime | |
gcc-toolset-10-systemtap-sdt-devel | |
gcc-toolset-10-systemtap-server | |
gcc-toolset-10-toolchain | |
gcc-toolset-10-valgrind | |
gcc-toolset-10-valgrind-devel | |
gcc-toolset-11 | |
gcc-toolset-11-annobin-annocheck | |
gcc-toolset-11-annobin-docs | |
gcc-toolset-11-annobin-plugin-gcc | |
gcc-toolset-11-binutils | |
gcc-toolset-11-binutils-devel | |
gcc-toolset-11-build | |
gcc-toolset-11-dwz | |
gcc-toolset-11-dyninst | |
gcc-toolset-11-dyninst-devel | |
gcc-toolset-11-elfutils | |
gcc-toolset-11-elfutils-debuginfod-client | |
gcc-toolset-11-elfutils-debuginfod-client-devel | |
gcc-toolset-11-elfutils-devel | |
gcc-toolset-11-elfutils-libelf | |
gcc-toolset-11-elfutils-libelf-devel | |
gcc-toolset-11-elfutils-libs | |
gcc-toolset-11-gcc | |
gcc-toolset-11-gcc-c++ | |
gcc-toolset-11-gcc-gdb-plugin | |
gcc-toolset-11-gcc-gfortran | |
gcc-toolset-11-gcc-plugin-devel | |
gcc-toolset-11-gdb | |
gcc-toolset-11-gdb-doc | |
gcc-toolset-11-gdb-gdbserver | |
gcc-toolset-11-libasan-devel | |
gcc-toolset-11-libatomic-devel | |
gcc-toolset-11-libgccjit | |
gcc-toolset-11-libgccjit-devel | |
gcc-toolset-11-libgccjit-docs | |
gcc-toolset-11-libitm-devel | |
gcc-toolset-11-liblsan-devel | |
gcc-toolset-11-libquadmath-devel | |
gcc-toolset-11-libstdc++-devel | |
gcc-toolset-11-libstdc++-docs | |
gcc-toolset-11-libtsan-devel | |
gcc-toolset-11-libubsan-devel | |
gcc-toolset-11-ltrace | |
gcc-toolset-11-make | |
gcc-toolset-11-make-devel | |
gcc-toolset-11-perftools | |
gcc-toolset-11-runtime | |
gcc-toolset-11-strace | |
gcc-toolset-11-systemtap | |
gcc-toolset-11-systemtap-client | |
gcc-toolset-11-systemtap-devel | |
gcc-toolset-11-systemtap-initscript | |
gcc-toolset-11-systemtap-runtime | |
gcc-toolset-11-systemtap-sdt-devel | |
gcc-toolset-11-systemtap-server | |
gcc-toolset-11-toolchain | |
gcc-toolset-11-valgrind | |
gcc-toolset-11-valgrind-devel | |
gcc-toolset-9 | |
gcc-toolset-9-annobin | |
gcc-toolset-9-binutils | |
gcc-toolset-9-binutils-devel | |
gcc-toolset-9-build | |
gcc-toolset-9-dwz | |
gcc-toolset-9-dyninst | |
gcc-toolset-9-dyninst-devel | |
gcc-toolset-9-dyninst-doc | |
gcc-toolset-9-dyninst-static | |
gcc-toolset-9-dyninst-testsuite | |
gcc-toolset-9-elfutils | |
gcc-toolset-9-elfutils-devel | |
gcc-toolset-9-elfutils-libelf | |
gcc-toolset-9-elfutils-libelf-devel | |
gcc-toolset-9-elfutils-libs | |
gcc-toolset-9-gcc | |
gcc-toolset-9-gcc-c++ | |
gcc-toolset-9-gcc-gdb-plugin | |
gcc-toolset-9-gcc-gfortran | |
gcc-toolset-9-gcc-plugin-devel | |
gcc-toolset-9-gdb | |
gcc-toolset-9-gdb-doc | |
gcc-toolset-9-gdb-gdbserver | |
gcc-toolset-9-libasan-devel | |
gcc-toolset-9-libatomic-devel | |
gcc-toolset-9-libitm-devel | |
gcc-toolset-9-liblsan-devel | |
gcc-toolset-9-libquadmath-devel | |
gcc-toolset-9-libstdc++-devel | |
gcc-toolset-9-libstdc++-docs | |
gcc-toolset-9-libtsan-devel | |
gcc-toolset-9-libubsan-devel | |
gcc-toolset-9-ltrace | |
gcc-toolset-9-make | |
gcc-toolset-9-make-devel | |
gcc-toolset-9-perftools | |
gcc-toolset-9-runtime | |
gcc-toolset-9-strace | |
gcc-toolset-9-systemtap | |
gcc-toolset-9-systemtap-client | |
gcc-toolset-9-systemtap-devel | |
gcc-toolset-9-systemtap-initscript | |
gcc-toolset-9-systemtap-runtime | |
gcc-toolset-9-systemtap-sdt-devel | |
gcc-toolset-9-systemtap-server | |
gcc-toolset-9-toolchain | |
gcc-toolset-9-valgrind | |
gcc-toolset-9-valgrind-devel | |
GConf2 | |
GConf2-devel | |
gegl | |
genwqe-tools | |
genwqe-vpd | |
genwqe-zlib | |
genwqe-zlib-devel | |
geoipupdate | |
Geronimo-annotation | |
Geronimo-annotation | |
geronimo-annotation-javadoc | |
geronimo-jms | |
geronimo-jms-javadoc | |
geronimo-jpa | |
geronimo-jpa-javadoc | |
geronimo-parent-poms | |
gfbgraph | |
gflags | |
gflags-devel | |
glassfish-annotation-api | |
glassfish-annotation-api | |
glassfish-annotation-api-javadoc | |
openfish-el | |
glassfish-fastinfoset | |
glassfish-jaxb-core | |
glassfish-jaxb-txw2 | |
glassfish-jsp | |
glassfish-jsp-api | |
glassfish-jsp-api | |
glassfish-jsp-api-javadoc | |
openfish-legal | |
glassfish-master-pom | |
glassfish-servlet-api | |
glassfish-servlet-api | |
glassfish-servlet-api-javadoc | |
glew-devel | |
glib2-fam | |
glog | |
glog-devel | |
gmock | |
gmock-devel | |
gnome-abrt | |
gnome-boxes | |
gnome-menus-devel | |
gnome-online-miners | |
gnome-shell-extension-dash-to-panel | |
gnome-shell-extension-disable-screenshield | |
gnome-shell-extension-horizontal-workspaces | |
gnome-shell-extension-no-hot-corner | |
gnome-shell-extension-window-grouper | |
gnome-themes-standard | |
gnu-free-fonts-common | |
gnu-free-mono-fonts | |
gnu-free-sans-fonts | |
gnu-free-serif-fonts | |
gnuplot | |
gnuplot-common | |
gnuplot-doc | |
google-gson | |
google-guice-javadoc | |
google-noto-sans-syriac-eastern-fonts | |
google-noto-sans-syriac-estrangela-fonts | |
google-noto-sans-syriac-western-fonts | |
google-noto-sans-tibetan-fonts | |
google-noto-sans-ui-fonts | |
gphoto2 | |
gsl-devel | |
gssntlmssp | |
gtest | |
gtest-devel | |
gtkmm24 | |
gtkmm24-devel | |
gtkmm24-docs | |
gtksourceview3 | |
gtksourceview3-devel | |
gtkspell | |
gtkspell-devel | |
guava20-javadoc | |
guava20-testlib | |
guice-assistedinject | |
Guice-bom | |
guice-extensions | |
guice-grapher | |
guice-jmx | |
guice-jndi | |
guice-multibindings | |
guice-parent | |
guice-servlet | |
guice-testlib | |
guice-throwingproviders | |
guile | |
guile-devel | |
gutenprint-libs-ui | |
gutenprint-plugin | |
gvfs-afc | |
gvfs-afp | |
gvfs-archive | |
hamcrest-core | |
hamcrest-core | |
hamcrest-demo | |
hamcrest-javadoc | |
hawtjni | |
hawtjni | |
hawtjni | |
hawtjni-javadoc | |
hawtjni-runtime | |
hawtjni-runtime | |
HdrHistogram | |
HdrHistogram-javadoc | |
highlight-gui | |
hplip-gui | |
httpcomponents-client-cache | |
httpcomponents-client-javadoc | |
httpcomponents-core-javadoc | |
httpcomponents-project | |
hwloc-plugins | |
hyphen-fo | |
hyphen-grc | |
hyphen-hsb | |
hyphen-ia | |
hyphen-is | |
hyphen-ku | |
hyphen-mi | |
hyphen-mn | |
하이픈-sa | |
hyphen-tk | |
ibus-sayura | |
Heatdax | |
icu4j | |
idm-console-framework | |
ilmbase-devel | |
ima-evm-utils0 | |
intel-gpu-tools | |
ipython | |
ISL | |
ISL-devel | |
isorelax | |
isorelax-javadoc | |
istack-commons-runtime | |
istack-commons-tools | |
ivy-local | |
iwl3945-firmware | |
iwl4965-firmware | |
iwl6000-firmware | |
jacoco | |
JAF | |
jaf-javadoc | |
jakarta-commons-httpclient-demo | |
jakarta-commons-httpclient-javadoc | |
jakarta-commons-httpclient-manual | |
jakarta-oro-javadoc | |
janino | |
jansi-javadoc | |
jansi-native | |
jansi-native | |
jansi-native-javadoc | |
JarJar | |
java-1.8.0-ibm | |
java-1.8.0-ibm-demo | |
java-1.8.0-ibm-devel | |
java-1.8.0-ibm-headless | |
java-1.8.0-ibm-jdbc | |
java-1.8.0-ibm-plugin | |
java-1.8.0-ibm-src | |
java-1.8.0-ibm-webstart | |
java-1.8.0-openjdk-accessibility | |
java-1.8.0-openjdk-accessibility-fastdebug | |
java-1.8.0-openjdk-accessibility-slowdebug | |
java-atk-wrapper | |
java_cup | |
java_cup-javadoc | |
java_cup-manual | |
javacc | |
javacc-demo | |
javacc-javadoc | |
javacc-manual | |
JavaCC-maven-plugin | |
javacc-maven-plugin-javadoc | |
javaewah | |
javamail-javadoc | |
javapackages-local | |
javaparser | |
javapoet | |
javassist | |
javassist | |
javassist-javadoc | |
javassist-javadoc | |
Jaxen | |
jaxen-demo | |
jaxen-javadoc | |
jboss-annotations-1.2-api | |
jboss-interceptors-1.2-api | |
jboss-interceptors-1.2-api | |
jboss-interceptors-1.2-api-javadoc | |
jboss-logmanager | |
jboss-parent | |
jctools | |
jdepend-demo | |
jdepend-javadoc | |
jdependency | |
jdependency-javadoc | |
jdom | |
jdom-demo | |
jdom-javadoc | |
jdom2 | |
jdom2-javadoc | |
>-<ty | |
jetty-continuation | |
jetty-http | |
jetty-io | |
jetty-security | |
jetty-server | |
jetty-servlet | |
jetty-util | |
jffi | |
jflex | |
jflex-javadoc | |
jgit | |
jline | |
jline | |
jline-javadoc | |
jmc | |
jmc-core-javadoc | |
jnr-netdb | |
jolokia-jvm-agent | |
js-uglify | |
jsch-javadoc | |
json_simple | |
jsoup-javadoc | |
jsr-305-javadoc | |
jss-javadoc | |
jtidy | |
jul-to-slf4j | |
junit-javadoc | |
junit-manual | |
jvnet-parent | |
jzlib-demo | |
jzlib-javadoc | |
kmod-redhat-oracleasm | |
kurdit-unikurd-web-fonts | |
kyotocabinet-libs | |
ldapjdk-javadoc | |
ensfun | |
lensfun-devel | |
lftp-scripts | |
libaec | |
libaec-devel | |
libappindicator-gtk3 | |
libappindicator-gtk3-devel | |
libasan6 | |
libatomic-static | |
libavc1394 | |
libblocksruntime | |
libcacard | |
libcacard-devel | |
libcgroup | |
libcgroup-tools | |
libchamplain | |
libchamplain-devel | |
libchamplain-gtk | |
libcroco | |
libcroco-devel | |
libcxl | |
libcxl-devel | |
libdap | |
libdap-devel | |
libdazzle-devel | |
libdbusmenu | |
libdbusmenu-devel | |
libdbusmenu-doc | |
libdbusmenu-gtk3 | |
libdbusmenu-gtk3-devel | |
libdnet | |
libdnet-devel | |
libdv | |
libdv-devel | |
libdwarf |
|
libdwarf-devel | |
libdwarf-static | |
libdwarf-tools | |
libeasyfc | |
libeasyfc-gobject | |
libepubgen-devel | |
libertas-sd8686-firmware | |
libertas-usb8388-firmware | |
libertas-usb8388-olpc-firmware | |
libgdither | |
libGLEW | |
libgovirt | |
libguestfs-benchmarking | |
libguestfs-gfs2 | |
libguestfs-java | |
libguestfs-java-devel | |
libguestfs-javadoc | |
libguestfs-tools | |
libguestfs-tools-c | |
libhugetlbfs | |
libhugetlbfs-devel | |
libhugetlbfs-utils | |
libIDL | |
libIDL-devel | |
libidn |
IDNA 2003 표준 구현 |
libidn-devel | |
libiec61883 | |
libiec61883-devel | |
libindicator-gtk3 | |
libindicator-gtk3-devel | |
libiscsi-devel | |
libkkc | |
libkkc-common | |
libkkc-data | |
liblogging | |
libmalaga | |
libmcpp | |
libmetalink | |
libmodulemd1 |
|
libmongocrypt | |
libmpcdec | |
libmpcdec-devel | |
libmtp-devel | |
libmusicbrainz5 | |
libmusicbrainz5-devel | |
liboauth | |
liboauth-devel | |
libocxl-docs | |
libpfm-static | |
libpng12 | |
libpurple | |
libpurple-devel | |
libraw1394 | |
libraw1394-devel | |
libreport-plugin-mailx | |
libreport-plugin-rhtsupport | |
libreport-plugin-ureport | |
libreport-rhel | |
libreport-rhel-bugzilla | |
librpmem |
|
librpmem-debug | |
librpmem-devel | |
libsass | |
libsass-devel | |
libselinux-python | |
libslirp-devel | |
libsqlite3x | |
libssh2-docs | |
libtar | |
libtpms-devel | |
libunwind | |
libusal | |
libvarlink | |
libverto-libevent | |
libvirt-admin | |
libvirt-bash-completion | |
libvirt-daemon-driver-storage-gluster | |
libvirt-daemon-driver-storage-iscsi-direct | |
libvirt-gconfig | |
libvirt-gobject | |
libvirt-wireshark | |
libvmem | |
libvmem-debug | |
libvmem-devel | |
libvmmalloc | |
libvmmalloc-debug | |
libvmmalloc-devel | |
libvncserver | |
libwmf | |
libwmf-devel | |
libwmf-lite | |
libXNVCtrl | |
libXvMC | |
libXxf86misc | |
libXxf86misc-devel | |
libyami | |
log4j-over-slf4j | |
log4j12 | |
log4j12 | |
log4j12-javadoc | |
log4j12-javadoc | |
lohit-malayalam-fonts | |
lohit-nepali-fonts | |
lucene | |
lucene-analysis | |
lucene-analyzers-smartcn | |
Lucene-queries | |
lucene-queryparser | |
lucene-sandbox | |
lz4-java | |
lz4-java-javadoc | |
mailman | |
make-devel | |
Malaga | |
malaga-suomi-voikko | |
Marisa | |
Maven-antrun-plugin | |
maven-antrun-plugin-javadoc | |
maven-archiver-javadoc | |
maven-artifact | |
maven-artifact-manager | |
maven-artifact-resolver-javadoc | |
maven-artifact-transfer-javadoc | |
maven-assembly-plugin | |
maven-assembly-plugin-javadoc | |
maven-cal10n-plugin | |
Maven-clean-plugin | |
maven-clean-plugin-javadoc | |
maven-common-artifact-filters-javadoc | |
maven-compiler-plugin-javadoc | |
Maven-dependency-aoctetsr | |
maven-dependency-analyzer-javadoc | |
maven-dependency-plugin | |
maven-dependency-plugin-javadoc | |
maven-dependency-tree-javadoc | |
Maven-doxia | |
maven-doxia-core | |
maven-doxia-javadoc | |
maven-doxia-logging-api | |
maven-doxia-module-apt | |
maven-doxia-module-confluence | |
maven-doxia-module-docbook-simple | |
maven-doxia-module-fml | |
maven-doxia-module-latex | |
maven-doxia-module-rtf | |
maven-doxia-module-twiki | |
maven-doxia-module-xdoc | |
maven-doxia-module-xhtml | |
maven-doxia-modules | |
maven-doxia-sink-api | |
maven-doxia-sitetools | |
maven-doxia-sitetools-javadoc | |
maven-doxia-test-docs | |
maven-doxia-tests | |
maven-enforcer-javadoc | |
maven-failsafe-plugin | |
maven-file-management-javadoc | |
maven-filtering-javadoc | |
maven-hawtjni-plugin | |
maven-install-plugin | |
maven-install-plugin-javadoc | |
Maven-invoker | |
maven-invoker-javadoc | |
maven-invoker-plugin | |
maven-invoker-plugin-javadoc | |
maven-jar-plugin-javadoc | |
maven-javadoc | |
maven-local | |
maven-model | |
maven-monitor | |
Maven-parent | |
maven-plugin-build-helper-javadoc | |
maven-plugin-bundle-javadoc | |
maven-plugin-descriptor | |
maven-plugin-registry | |
maven-plugin-testing-javadoc | |
maven-plugin-testing-tools | |
maven-plugin-tools-ant | |
maven-plugin-tools-beanshell | |
maven-plugin-tools-javadoc | |
maven-plugin-tools-javadocs | |
maven-plugin-tools-model | |
maven-plugins-pom | |
maven-profile | |
maven-project | |
maven-remote-resources-plugin-javadoc | |
maven-reporting-api | |
maven-reporting-api-javadoc | |
maven-reporting-impl | |
maven-reporting-impl-javadoc | |
maven-resolver-api | |
maven-resolver-api | |
maven-resolver-connector-basic | |
maven-resolver-connector-basic | |
maven-resolver-impl | |
maven-resolver-impl | |
maven-resolver-javadoc | |
maven-resolver-spi | |
maven-resolver-spi | |
maven-resolver-test-util | |
maven-resolver-transport-classpath | |
maven-resolver-transport-file | |
maven-resolver-transport-http | |
maven-resolver-transport-wagon | |
maven-resolver-transport-wagon | |
maven-resolver-util | |
maven-resolver-util | |
maven-resources-plugin-javadoc | |
Maven-scm | |
maven-script | |
maven-script-ant | |
maven-script-beanshell | |
maven-script-interpreter | |
maven-script-interpreter-javadoc | |
maven-settings | |
maven-shade-plugin | |
maven-shade-plugin-javadoc | |
Maven-shared | |
maven-shared-incremental-javadoc | |
maven-shared-io-javadoc | |
maven-shared-utils-javadoc | |
maven-source-plugin-javadoc | |
maven-surefire-javadoc | |
maven-surefire-report-parser | |
maven-surefire-report-plugin | |
maven-test-tools | |
maven-toolchain | |
maven-verifier-javadoc | |
maven-wagon-file | |
maven-wagon-file | |
maven-wagon-ftp | |
maven-wagon-http | |
maven-wagon-http | |
maven-wagon-http-lightweight | |
maven-wagon-http-shared | |
maven-wagon-http-shared | |
maven-wagon-javadoc | |
maven-wagon-provider-api | |
maven-wagon-provider-api | |
maven-wagon-providers | |
maven2 | |
maven2 | |
maven2-javadoc | |
한편 | |
Mercurial | |
mercurial-hgk | |
mesa-vdpau-drivers | |
Metis | |
metis-devel | |
mingw32-bzip2 | |
mingw32-bzip2-static | |
mingw32-cairo | |
mingw32-expat | |
mingw32-fontconfig | |
mingw32-freetype | |
mingw32-freetype-static | |
mingw32-gstreamer1 | |
mingw32-harfbuzz | |
mingw32-harfbuzz-static | |
mingw32-icu | |
mingw32-libjpeg-turbo | |
mingw32-libjpeg-turbo-static | |
mingw32-libpng | |
mingw32-libpng-static | |
mingw32-libtiff | |
mingw32-libtiff-static | |
mingw32-openssl | |
mingw32-readline | |
mingw32-spice-vdagent | |
mingw32-sqlite | |
mingw32-sqlite-static | |
mingw64-adwaita-icon-theme | |
mingw64-bzip2 | |
mingw64-bzip2-static | |
mingw64-cairo | |
mingw64-expat | |
mingw64-fontconfig | |
mingw64-freetype | |
mingw64-freetype-static | |
mingw64-gstreamer1 | |
mingw64-harfbuzz | |
mingw64-harfbuzz-static | |
mingw64-icu | |
mingw64-libjpeg-turbo | |
mingw64-libjpeg-turbo-static | |
mingw64-libpng | |
mingw64-libpng-static | |
mingw64-libtiff | |
mingw64-libtiff-static | |
mingw64-nettle | |
mingw64-openssl | |
mingw64-readline | |
mingw64-spice-vdagent | |
mingw64-sqlite | |
mingw64-sqlite-static | |
mockito-javadoc | |
modello | |
modello-javadoc | |
Mojo-parent | |
Mongo-c-driver | |
motif-static | |
mousetweaks | |
mozjs52 | |
mozjs52-devel | |
mozjs60 | |
mozjs60-devel | |
mozvoikko | |
msv-javadoc | |
msv-manual | |
munge-maven-plugin | |
munge-maven-plugin-javadoc | |
mythes-mi | |
mythes-ne | |
nafees-web-naskh-fonts | |
nbd-3.21-2.el9 | |
nbdkit-gzip-plugin | |
nbdkit-plugin-python-common | |
nbdkit-plugin-vddk | |
nbdkit-tar-plugin | |
ncompress |
|
ncurses-compat-libs | |
NetCF | |
NetCF-devel | |
NetCF-libs | |
network-scripts-ppp | |
NKF | |
nodejs-devel | |
nodejs-packaging | |
nss-pam-ldapd |
|
nss_nis | |
objectweb-asm-javadoc | |
objectweb-pom | |
objenesis-javadoc | |
ocaml-bisect-ppx | |
ocaml-camlp4 | |
ocaml-camlp4-devel | |
ocaml-lwt-5.3.0-7.el9 | |
ocaml-mmap-1.1.0-16.el9 | |
ocaml-ocplib-endian-1.1-5.el9 | |
ocaml-ounit-2.2.2-15.el9 | |
ocaml-result-1.5-7.el9 | |
ocaml-seq-0.2.2-4.el9 | |
opencryptoki-tpmtok | |
opencv-contrib | |
OpenCV-core | |
opencv-devel | |
OpenEXR-devel | |
openhpi | |
openhpi-libs | |
OpenIPMI-perl | |
openssh-cavs | |
openssh-ldap | |
openssl-ibmpkcs11 | |
OS-maven-plugin | |
os-maven-plugin-javadoc | |
osgi-annotation-javadoc | |
osgi-compendium-javadoc | |
osgi-core-javadoc | |
owasp-java-encoder-javadoc | |
pakchois | |
Pandoc | |
pandoc-common | |
paps-libs | |
Paranamer | |
parfait | |
parfait-examples | |
parfait-javadoc | |
pcp-parfait-agent | |
pcsc-lite-doc | |
perl-B-Debug | |
perl-B-Lint | |
perl-Class- factory-octets | |
perl-Class-ISA | |
perl-DateTime-Format-HTTP | |
perl-DateTime-Format-Mail | |
perl-File-CheckTree | |
perl-homedir | |
perl-libxml-perl | |
perl-Locale-Codes | |
perl-Mozilla-LDAP | |
perl-NKF | |
perl-Object-HashBase-tools | |
perl-Package-DeprecationManager | |
perl-Pod-LaTeX | |
perl-Pod-Plainer | |
perl-prefork | |
perl-String-CRC32 | |
perl-SUPER | |
perl-Sys-Virt | |
perl-tests | |
perl-YAML-Syck | |
phodav-2.5-4.el9 | |
php-recode | |
php-xmlrpc | |
pidgin | |
Pidgin-devel | |
pidgin-sipe | |
pinentry-emacs | |
pinentry-gtk | |
pipewire0.2-devel | |
pipewire0.2-libs | |
platform-python-coverage | |
plexus-ant-factory | |
plexus-ant-factory-javadoc | |
plexus-archiver-javadoc | |
plexus-bsh-factory | |
plexus-bsh-factory-javadoc | |
plexus-build-api-javadoc | |
plexus-cipher-javadoc | |
plexus-classworlds-javadoc | |
plexus-cli | |
plexus-cli-javadoc | |
plexus-compiler-extras | |
plexus-compiler-javadoc | |
plexus-compiler-pom | |
plexus-component-api | |
plexus-component-api-javadoc | |
plexus-component-factories-pom | |
plexus-components-pom | |
plexus-containers-component-javadoc | |
plexus-containers-component-metadata | |
plexus-containers-container-default | |
plexus-containers-javadoc | |
plexus-i18n | |
plexus-i18n-javadoc | |
Plexus-interactivity | |
plexus-interactivity-api | |
plexus-interactivity-javadoc | |
plexus-interactivity-jline | |
plexus-interpolation-javadoc | |
plexus-io-javadoc | |
plexus-languages-javadoc | |
plexus-pom | |
plexus-resources-javadoc | |
plexus-sec-dispatcher-javadoc | |
plexus-utils-javadoc | |
plexus-velocity | |
plexus-velocity-javadoc | |
plymouth-plugin-throbgress | |
postgresql-test-rpm-macros | |
powermock | |
powermock-api-easymock | |
powermock-api-mockito | |
powermock-api-support | |
powermock-common | |
powermock-core | |
powermock-javadoc | |
powermock-junit4 | |
powermock-reflect | |
powermock-testng | |
prometheus-jmx-exporter | |
prometheus-jmx-exporter-openjdk11 | |
ptscotch-mpich | |
ptscotch-mpich-devel | |
ptscotch-mpich-devel-parmetis | |
ptscotch-openmpi | |
ptscotch-openmpi-devel | |
Purple-sipe | |
pygobject2-doc | |
pygtk2 | |
pygtk2-codegen | |
pygtk2-devel | |
pygtk2-doc | |
python-nose-docs | |
python-nss-doc | |
python-podman-api | |
python-psycopg2-doc | |
python-pymongo-doc | |
python-redis | |
python-schedutils | |
python-slip | |
python-sphinx-locale | |
python-sqlalchemy-doc | |
python-varlink | |
python-virtualenv-doc | |
python2-backports | |
python2-backports-ssl_match_hostname | |
python2-bson | |
python2-coverage | |
python2-docs | |
python2-docs-info | |
python2-funcsigs | |
python2-gluster | |
python2-ipaddress | |
python2-iso8601 | |
python2-mock | |
python2-nose | |
python2-numpy-doc | |
python2-psycopg2-debug | |
python2-psycopg2-tests | |
python2-pymongo | |
python2-pymongo-gridfs | |
python2-pytest-mock | |
python2-sqlalchemy | |
python2-tools | |
python2-virtualenv | |
python3-bson | |
python3-click | |
python3-coverage | |
python3-cpio | |
python3-custodia | |
python3-docs | |
python3-flask | |
python3-gevent | |
python3-html5lib | |
python3-hypothesis | |
python3-iso8601 | |
python3-itsdangerous | |
python3-javapackages | |
python3-jwt | |
python3-mock | |
python3-networkx-core | |
python3-nose | |
python3-nss | |
python3-openipmi |
|
python3-pexpect | |
python3-pillow | |
python3-pillow-devel | |
python3-pillow-doc | |
python3-pillow-tk | |
python3-ptyprocess | |
python3-pydbus | |
python3-pymongo | |
python3-pymongo-gridfs | |
python3-pyOpenSSL | |
python3-reportlab | |
python3-schedutils | |
python3-scons | |
python3-semantic_version | |
python3-slip | |
python3-slip-dbus | |
python3-sqlalchemy |
|
python3-sure | |
python3-syspurpose | |
python3-unittest2 | |
python3-virtualenv |
대신 Python 3에서 |
python3-webencodings | |
python3-werkzeug | |
python3-whoosh | |
python38-asn1crypto | |
python38-atomicwrites | |
python38-more-itertools | |
python38-numpy-doc | |
python38-psycopg2-doc | |
python38-psycopg2-tests | |
python39-more-itertools | |
python39-numpy-doc | |
python39-psycopg2-doc | |
python39-psycopg2-tests | |
python39-pybind11 | |
python39-pybind11-devel | |
qdox-javadoc | |
qemu-kvm-block-gluster | |
qemu-kvm-block-iscsi | |
qemu-kvm-block-ssh | |
qemu-kvm-device-display-virtio-gpu-gl | |
qemu-kvm-device-display-virtio-gpu-pci-gl | |
qemu-kvm-device-display-virtio-vga-gl | |
qemu-kvm-hw-usbredir | |
qemu-kvm-tests | |
qemu-kvm-ui-spice | |
qpdf | |
qpdf-doc | |
qperf |
|
qpid-proton | |
qrencode | |
qrencode-devel | |
qrencode-libs | |
qt5-qtcanvas3d | |
qt5-qtcanvas3d-examples | |
rarian | |
rarian-compat | |
re2c | |
Recode | |
redhat-lsb | |
redhat-lsb-core | |
redhat-lsb-cxx | |
redhat-lsb-desktop | |
redhat-lsb-languages | |
redhat-lsb-printing | |
redhat-lsb-submod-multimedia | |
redhat-lsb-submod-security | |
redhat-menus | |
redhat-support-lib-python | |
redhat-support-tool | |
dpdks | |
regexp-javadoc | |
relaxngDatatype | |
rhsm-gtk | |
rpm-plugin-prioreset | |
rpmemd | |
rubygem-abrt | |
rubygem-abrt-doc | |
rubygem-bson | |
rubygem-bson-doc | |
rubygem-mongo | |
rubygem-mongo-doc | |
s390utils-cmsfs |
|
samyak-devanagari-fonts | |
samyak-fonts-common | |
samyak-gujarati-fonts | |
samyak-malayalam-fonts | |
samyak-odia-fonts | |
samyak-tamil-fonts | |
sane-frontends |
|
sanlk-reset | |
sat4j | |
scala | |
scotch | |
scotch-devel | |
SDL_sound | |
selinux-policy-minimum | |
축소 줄 바꿈 | |
sisu-inject | |
sisu-inject | |
sisu-javadoc | |
SISU-mojos | |
sisu-mojos-javadoc | |
sisu-plexus | |
sisu-plexus | |
skkdic | |
slf4j-ext | |
slf4j-javadoc | |
slf4j-jcl | |
slf4j-log4j12 | |
slf4j-manual | |
slf4j-sources | |
SLOF | |
smc-anjalioldlipi-fonts | |
smc-dyuthi-fonts | |
smc-fonts-common | |
smc-kalyani-fonts | |
smc-raghumalayalam-fonts | |
smc-suruma-fonts | |
softhsm-devel | |
sonatype-oss-parent | |
sonatype-plugins-parent | |
sos-collector | |
sparsehash-devel | |
spax |
|
spec-version-maven-plugin | |
spec-version-maven-plugin-javadoc | |
spice-0.14.3-4.el9 | |
spice-client-win-x64 | |
spice-client-win-x86 | |
spice-glib | |
spice-glib-devel | |
spice-gtk | |
spice-gtk-tools | |
spice-gtk3 | |
spice-gtk3-devel | |
spice-gtk3-vala | |
spice-parent | |
spice-qxl-wddm-dod | |
spice-qxl-xddm | |
spice-server | |
spice-server-devel | |
spice-streaming-agent | |
spice-vdagent-win-x64 | |
spice-vdagent-win-x86 | |
star | |
stax-ex | |
stax2-api | |
stringtemplate | |
stringtemplate4 | |
subscription-manager-initial-setup-addon | |
subscription-manager-migration | |
subscription-manager-migration-data | |
Subversion-javahl | |
SuperLU | |
SuperLU-devel | |
swtpm-devel | |
swtpm-tools-pkcs11 | |
system-storage-manager | |
tcl-brlapi | |
TestNG | |
testng-javadoc | |
tibetan-machine-uni-fonts | |
timedatex |
|
tpm-quote-tools | |
tpm-tools | |
tpm-tools-pkcs11 | |
treelayout | |
trousers | |
trousers-devel | |
trousers-lib | |
tuned-profiles-compat | |
tuned-profiles-nfv-host-bin | |
tuned-utils-systemtap | |
tycho | |
uglify-js | |
unbound-devel | |
univocity-output-tester | |
usbguard-notifier | |
utf8cpp | |
uthash | |
velocity-demo | |
velocity-javadoc | |
speed-manual | |
vinagre | |
Vino | |
virt-dib | |
virt-p2v-maker | |
vm-dump-metrics-devel | |
weld-parent | |
woodstox-core | |
wqy-microhei-fonts | |
wqy-unibit-fonts | |
xalan-j2-demo | |
xalan-j2-javadoc | |
xalan-j2-manual | |
xalan-j2-xsltc | |
xbean-javadoc | |
xdelta | |
xerces-j2-demo | |
xerces-j2-javadoc | |
xml-commons-apis-javadoc | |
xml-commons-apis-manual | |
xml-commons-resolver-javadoc | |
xmlgraphics-commons | |
xmlstreambuffer | |
xmlunit-javadoc | |
xmvn-api | |
xmvn-bisect | |
xmvn-connector-aether | |
xmvn-connector-ivy | |
xmvn-install | |
xmvn-javadoc | |
xmvn-parent-pom | |
xmvn-resolve | |
xmvn-subst | |
xmvn-tools-pom | |
xorg-sgml-doctools | |
xorg-x11-apps | |
xorg-x11-docs | |
xorg-x11-drv-ati | |
xorg-x11-drv-intel | |
xorg-x11-drv-nouveau | |
xorg-x11-drv-qxl | |
xorg-x11-drv-vesa | |
xorg-x11-server-Xspice | |
xorg-x11-xkb-utils-devel | |
xpp3 | |
xsane-gimp | |
xsom | |
xz-java-javadoc | |
yajl-devel | |
YP-tools | |
ypbind | |
ypserv | |
yum-rhn-plugin |
A.5. 제거된 지원 패키지가 있는 패키지
RHEL 9의 특정 패키지는 개발자가 사용할 지원되지 않는 패키지가 포함된 CodeReady Linux Builder 리포지토리를 통해 배포됩니다.
다음 패키지는 RHEL 8 및 CodeReady Linux Builder 리포지토리 RHEL 9에서 지원되는 리포지토리로 배포됩니다.
이 목록에는 RHEL 8에서 지원되지만 RHEL 9에서는 지원되지 않는 패키지만 다룹니다.
패키지 | RHEL 8 리포지토리 |
---|---|
apache-commons-collections | rhel8-AppStream |
apache-commons-compress | rhel8-AppStream |
aspell | rhel8-AppStream |
bind-devel | rhel8-AppStream |
createrepo_c-devel | rhel8-AppStream |
fstrm-devel | rhel8-AppStream |
gdbm | rhel8-BaseOS |
gdbm-devel | rhel8-BaseOS |
geoclue2-demos | rhel8-AppStream |
gobject-introspection-devel | rhel8-AppStream |
gtkspell3 | rhel8-AppStream |
hivex-devel | rhel8-AppStream |
kernel-cross-headers | rhel8-BaseOS |
ksc | rhel8-BaseOS |
libatomic_ops | rhel8-AppStream |
libestr-devel | rhel8-AppStream |
libguestfs-devel | rhel8-AppStream |
libguestfs-gobject | rhel8-AppStream |
libguestfs-gobject-devel | rhel8-AppStream |
libguestfs-man-pages-ja | rhel8-AppStream |
libguestfs-man-pages-uk | rhel8-AppStream |
libica-devel | rhel8-BaseOS |
libiscsi-devel | rhel8-AppStream |
libjose-devel | rhel8-AppStream |
libldb-devel | rhel8-BaseOS |
libluksmeta-devel | rhel8-AppStream |
libnbd-devel | rhel8-AppStream |
libtalloc-devel | rhel8-BaseOS |
libtdb-devel | rhel8-BaseOS |
libtevent-devel | rhel8-BaseOS |
libvirt-devel | rhel8-AppStream |
libvirt-docs | rhel8-AppStream |
libvirt-lock-sanlock | rhel8-AppStream |
libwinpr-devel | rhel8-AppStream |
Lua-guestfs | rhel8-AppStream |
mariadb-devel | rhel8-AppStream |
mariadb-embedded-devel | rhel8-AppStream |
mariadb-test | rhel8-AppStream |
multilib-rpm-config | rhel8-AppStream |
mysql-devel | rhel8-AppStream |
mysql-libs | rhel8-AppStream |
mysql-test | rhel8-AppStream |
nbdkit-devel | rhel8-AppStream |
nbdkit-example-plugins | rhel8-AppStream |
nginx-mod-devel | rhel8-AppStream |
nss_db | rhel8-BaseOS |
openblas-threads | rhel8-AppStream |
perl-IO-String | rhel8-AppStream |
perl-Module-Pluggable | rhel8-AppStream |
perl-Module-Runtime | rhel8-AppStream |
perl-Parse-Yapp | rhel8-BaseOS |
postgresql-server-devel | rhel8-AppStream |
postgresql-test | rhel8-AppStream |
postgresql-upgrade-devel | rhel8-AppStream |
protobuf-c-compiler | rhel8-AppStream |
protobuf-c-devel | rhel8-AppStream |
protobuf-compiler | rhel8-AppStream |
python3-gobject-base | rhel8-AppStream |
python3-hivex | rhel8-AppStream |
python3-ipatests | rhel8-AppStream |
python3-libguestfs | rhel8-AppStream |
qclib-devel | rhel8-BaseOS |
ruby-hivex | rhel8-AppStream |
ruby-libguestfs | rhel8-AppStream |
samba-pidl | rhel8-BaseOS |
samba-test | rhel8-BaseOS |
samba-test-libs | rhel8-BaseOS |
sendmail-milter | rhel8-AppStream |
spice-protocol | rhel8-BaseOS |
supermin-devel | rhel8-AppStream |
swig | rhel8-AppStream |
swig-doc | rhel8-AppStream |
swig-gdb | rhel8-AppStream |
turbojpeg | rhel8-AppStream |
unixODBC-devel | rhel8-AppStream |
usbredir-devel | rhel8-AppStream |
속도 | rhel8-AppStream |