Hammer CLI ガイド

Red Hat Satellite 6.6

Satellite の CLI ツール、Hammer の使用

Red Hat Satellite Documentation Team

概要

本ガイドは、Hammer CLI ツールを使用して Red Hat Satellite を設定/管理する方法を説明します。

第1章 Hammer の概要

Hammer は、Red Hat Satellite 6 で提供される強力なコマンドラインツールです。Hammer を使用して、CLI コマンド、またはシェルスクリプトによる自動化により、Red Hat Satellite Server を設定/管理することができます。Hammer は対話式のシェルも提供します。

Hammer と Satellite Web UI の比較

Web UI の操作感と比較すると、Hammer を使用する場合には環境変数やエイリアスなどのシェル機能が自由に使えるため、Satellite Server との対話がはるかに速くなります。また、Hammer のコマンドを再利用可能なスクリプトに組み込み、あらゆるレベルで複雑なタスクを自動化することもできます。Hammer コマンドからの出力を他のツールにリダイレクトして、既存の環境と統合することができます。Hammer コマンドは、Red Hat Satellite を稼働するベースオペレーティングシステムで直接実行できます。

Hammer コマンドを発行するには、Satellite Server のベースのオペレーティングシステムにアクセスする必要があるため、Web UI と比較すると、潜在的なユーザー数が限定されてしまいます。Hammer と Web UI の違いはほぼありませんが、Web UI の開発の優先度は高く、特に新しく導入される機能についてはこちらが優先されることがあります。

Hammer と Satellite API の比較

多くのタスクで、Hammer も Satellite API も同等に利用可能です。Hammer は、スクリプトに適用する前に API の呼び出しの応答をテストするなど、Satellite API よりも使いやすいインターフェースとして利用できます (hammer -d organization list など、Hammer で発行した API の呼び出しを検査するには -d オプションを使用します)。API での変更は自動的に Hammer に適用されますが、API を直接使用するスクリプトは手動で更新する必要があります。

バックグラウンドで、各 Hammer コマンドは最初に API へのバインドを確立し、要求を送信します。大量の Hammer コマンドを順番に実行する場合には、パフォーマンスに影響が出る可能性があります。反対に、API で直接通信するスクリプトではバインドを確立するのは一度で済みます。詳しい情報は『 API ガイド』を参照してください。

1.1. ヘルプ

hammer オプションおよびサブコマンドの完全な一覧を表示するには以下を実行します。

$ hammer --help

以下のように --help を使用してサブコマンドを確認します。

$ hammer organization --help

以下のように grep を使用して help の出力を検索するか、テキストビューワーにリダイレクトすることができます。

$ hammer | less

1.2. 認証

hammer コマンドを使用する場合は Red Hat Satellite に ID を証明する必要があります。hammer コマンドは手動または自動で実行できます。いずれの場合も、認証には Satellite 認証情報が必要です。hammer 認証には 3 つの方法があります。

  • Hammer 認証セッション
  • hammer 設定ファイルに認証情報を保存
  • hammer コマンドを使用するたびに認証情報を指定

自動でコマンドを実行する場合は、hammer 設定ファイルを使用することが推奨されます。たとえば、cron ジョブから Satellite メンテナンスコマンドを実行する場合です。コマンドを手動で実行する場合は、hammer 認証セッションを使用して、コマンドを実行するたびに認証情報を提供する方法が推奨されます。

1.2.1. Hammer 認証セッション

Hammer 認証セッションでは、認証情報をキャッシュで保存するので、セッションの最初に一度だけ認証情報を入力する必要があります。この手法は、複数の Hammer コマンドを含むスクリプトなど、複数の Hammer コマンドを順次実行する場合に適して言います。このようなシナリオでは Satellite の認証情報を一度入力すると、スクリプトは想定通りに実行されます。Hammer の認証セッションを使用する場合は、スクリプト自体に認証情報を保存せず、~/.hammer/cli.modules.d/foreman.yml の hammer 設定ファイルに保存します。

セッションの使用方法は以下のようになります。

  • セッションを有効にするには、:use_sessions: true~/.hammer/cli.modules.d/foreman.yml ファイルに追加します。

    :foreman:
     :use_sessions: true

    セッションを有効にすると、設定ファイルに保存している認証情報は無視されます。

  • セッションを開始するには、以下のコマンドを入力します。

    # hammer auth login

    Satellite 認証情報が求められ、ログインします。その認証情報は、セッションの有効期限が切れるまで持続するため、再要求はされません。

  • セッションのデフォルトの長さは 60 分ですが、自由に変更できます。たとえば、30 分に変更するには、以下のコマンドを使用します。

    # hammer settings set --name idle_timeout --value 30
    Setting [idle_timeout] updated to [30]
  • セッションの現在のステータスを表示するには、以下のコマンドを実行します。

    # hammer auth status
  • セッションを終了するには、以下のコマンドを入力します。

    # hammer auth logout

1.2.2. Hammer 設定ファイル

--foreman-initial-admin-username および --foreman-initial-admin-password オプションを使用して Satellite のインストールを実行すると、入力した認証情報が ~/.hammer/cli.modules.d/foreman.yml に保存され、hammer により認証情報の入力が求められます。

認証情報は、手動で ~/.hammer/cli.modules.d/foreman.yml 設定ファイルに追加することもできます。

:foreman:
 :username: 'username'
 :password: 'password'
重要

hammer 設定ファイルのインデントには、スペースのみを使用するようにしてください。タブは使用しないでください。

1.2.3. コマンドライン

Satellite 認証情報を ~/.hammer/cli.modules.d/foreman.yml 設定ファイルに保存しないと、コマンドを入力するたびに hammer によって認証情報が求められます。以下のように、コマンドの実行時に認証情報を指定できます。

$ hammer -u username -p password subcommands
注記

本ガイドの例は、設定ファイルの認証情報が保存されているか、hammer 認証セッションを使用していることを前提としています。

1.3. スタンドアロンの Hammer の使用

Satellite Server がインストールされていないホストに、hammer をインストールして、リモートの Satellite への接続に使用できます。

前提条件

  • Satellite Server または Capsule Server にホストを登録しておく。詳細は、『プロビジョニングガイド』の「ホストの登録」を参照してください。
  • Satellite Server または Capsule Server で以下のリポジトリーを同期しておく。詳細は、『コンテンツ管理ガイド』の「Red Hat リポジトリーの同期」を参照してください。

    • rhel-7-server-rpms
    • rhel-server-rhscl-7-rpms
    • rhel-7-server-satellite-tools-6.6-rpms

手順

ホストで、以下の手順を実行して hammer をインストールします。

  1. Red Hat Enterprise Linux、Red Hat Software Collections および Red Hat Satellite Tools の各リポジトリーを有効にします。

    # subscription-manager repos --enable=rhel-7-server-rpms \
    --enable=rhel-server-rhscl-7-rpms \
    --enable=rhel-7-server-satellite-tools-6.6-rpms
  2. hammer をインストールします。

    # yum install tfm-rubygem-hammer_cli_katello
  3. Satellite の IP アドレスまたは FQDN を含めるように、/etc/hammer/cli.modules.d/foreman.yml ファイルの :host: エントリーを編集します。

    :host: 'https://satellite.example.com'

1.4. デフォルトの組織およびロケーションの設定

hammer コマンドの多くは、組織固有のものです。--organization および --location オプションで毎回指定する必要がないように、hammer コマンドにデフォルトの組織とロケーションを設定できます。

組織 を 1 つ管理することが多い場合には、入力するコマンドが短くなるので、デフォルトの組織を指定すると便利です。ただし、別の組織に切り替える場合には、hammer コマンドを使用して、--organization オプションで切り替える組織を指定します。

手順

デフォルトの組織と場所を設定するには、次の手順を実行します。

  1. デフォルトの組織を設定するには、以下のコマンドを入力します。

    # hammer defaults add --param-name organization \
    --param-value "Your_Organization"

    hammer organization list コマンドを使用して、組織の名前を検索します。

  2. オプション: デフォルトのロケーションを設定するには、以下のコマンドを入力します。

    # hammer defaults add --param-name location \
    --param-value 'Your_Location"

    hammer location list コマンドを使用して、ロケーションの名前を検索します。

  3. 現在指定しているデフォルトの設定を確認するには、以下のコマンドを実行します。

    # hammer defaults list

1.5. Hammer の設定

デフォルトでは、グローバルの hammer 設定は以下の場所に配置されています。

  • 一般的な hammer の設定: /etc/hammer/cli_config.yml
  • CLI モジュールの設定ファイル: /etc/hammer/cli.modules.d/

hammer (~/.hammer/cli_config.yml) または CLI モジュール (~/.hammer/cli.modules.d/ の適切な .yml ファイル) にユーザー固有のディレクティブを設定できます。

設定ファイルの読み込み順と、読み込んだモジュールのバージョンを表示するには、以下を実行します。

$ hammer -d --version
注記

多くの CLI モジュールの設定を読み込むと、hammer コマンドの実行の速度が遅くなる可能性があります。このような場合に、あまり使用しない CLI モジュールを無効化することを検討してください。

「認証」に記載されているような認証情報を保存する以外に、~/.hammer/ 設定ディレクトリーに他の複数のオプションを設定できます。たとえば、~/.hammer/cli_config.yml でデフォルトのログレベルを変更して、以下のディレクティブを使用してログのローテーションを設定することができます。これらのディレクティブは、現在のユーザーにのみ影響を及ぼし、グローバルには適用されない点に注意してください。

:log_level: 'warning'
:log_size: 5 #in MB

同様に、ユーザーインターフェースの設定を行います。たとえば、Hammer 出力で、要求ごとに表示するエントリー数を設定するには、以下の行を変更します。

:per_page: 30

この設定は、--per-page Hammer オプションと同等です。

1.6. Hammer ロギングの設定

hammer を設定して、さまざまな Satellite コンポーネントのデバッグ情報をロギングすることができます。

全 Satellite コンポーネントに対してデバッグまたは通常の設定オプションを設定できます。

注記

hammer のロギング動作を変更したら、Satellite サービスを再起動する必要があります。

# satellite-maintain service restart
  • 全コンポーネントのデバッグレベルを設定するには、以下のコマンドを使用します。

    # hammer admin logging --all --level-debug
    # satellite-maintain service restart
  • 実稼動レベルのロギングを設定するには、以下のコマンドを使用します。

    # hammer admin logging --all --level-production
    # satellite-maintain service restart
  • ロギングが設定可能なコンポーネントで現在認識されているものを表示するには、以下のコマンドを使用します。

    # hammer admin logging --list
  • 利用可能なロギングオプションを一覧表示するには、以下のコマンドを使用します。

    # hammer admin logging --help
    
    Usage:
        hammer admin logging [OPTIONS]

1.7. Hammer シェルの呼び出し

対話型シェルで hammer コマンドを発行することができます。このシェルを呼び出すには、以下のコマンドを発行します。

$ hammer shell

このシェルでは、「hammer」と入力せずに直接サブコマンドを入力できるので、スクリプトで使用する前にコマンドをテストする際に便利です。このシェルを終了するには、exit と入力するか、[Ctrl + D] を押してください。

1.8. フォーマット済みの出力の生成

hammer コマンドのデフォルトの出力形式を変更して、他のコマンドラインツールやアプリケーションでこの出力結果を処理しやすくすることができます。たとえば、CSV 形式で、カスタムの区切り文字を利用して (ここではセミコロンを使用) 組織を表示するには、以下のコマンドを実行します。

$ hammer --csv --csv-separator ";" organization list

CSV 形式の出力は、ID を解析して for ループで使用する必要がある場合などに便利です。

--output オプションには、他に複数のフォーマットオプションがあります。

$ hammer --output output_format organization list

output_format を、以下のいずれかに置き換えます。

  • table: 人間が判読できる表形式 (デフォルト) で出力を生成します。
  • base: キーと値のペアの形式で出力を生成します。
  • yaml: YAML 形式で出力を生成します。
  • csv: コンマ区切りの値形式で出力を生成します。カスタムの区切り文字を定義するには、代わりに --csv および --csv-separator オプションを使用してください。
  • json: JavaScript Object Notation (JSON) 形式の出力を生成します。
  • silent: 出力を表示しません。

1.9. Hammer コマンドのヘッダー出力の非表示

hammer コマンドの使用時には、出力からヘッダーを隠すオプションがあります。カスタムスクリプトでパイプを使用するまたは出力を使用する場合は、出力の非表示が便利です。

  • ヘッダー出力を隠すには、--no-headers オプションを hammer コマンドに追加します。

1.10. Hammer でのトラブルシューティング

hammer ping コマンドを使用して、コアの Satellite サービスのステータスを確認できます。satellite-maintain service status コマンドと併用すると、Satellite の問題の診断、トラブルシューティングに役立ちます。すべてのサービスが想定どおりに実行されている場合には、出力は以下のようになります。

$ hammer ping
candlepin:
    Status:          ok
    Server Response: Duration: 22ms
candlepin_auth:
    Status:          ok
    Server Response: Duration: 17ms
pulp:
    Status:          ok
    Server Response: Duration: 41ms
pulp_auth:
    Status:          ok
    Server Response: Duration: 23ms
foreman_tasks:
    Status:          ok
    Server Response: Duration: 33ms

第2章 参考情報

本章では、Hammer の使用方法の説明を一覧で紹介します。以下の使用方法は、Hammer の複数バージョンおよび、Satellite 6.6 向けにリリースされた Hammer のコンポーネントに対して最新の説明です。

2.1. Hammer

Usage:
    hammer [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 activation-key                Manipulate activation keys
 admin                         Administrative server-side tasks
 ansible                       Manage foreman ansible
 architecture                  Manipulate architectures
 arf-report                    Manipulate compliance reports
 audit                         Search audit trails.
 auth                          Foreman connection login/logout
 auth-source                   Manipulate auth sources
 bootdisk                      Download boot disks
 capsule                       Manipulate capsule
 compute-profile               Manipulate compute profiles
 compute-resource              Manipulate compute resources
 config-group                  Manipulate config groups
 config-report                 Browse and read reports
 content-view                  Manipulate content views
 defaults                      Defaults management
 discovery                     Manipulate discovered hosts.
 discovery-rule                Manipulate discovered rules.
 docker                        Manipulate docker content
 domain                        Manipulate domains
 environment                   Manipulate environments
 erratum                       Manipulate errata
 export-templates              Export templates to a git repo or a directory on the server
 fact                          Search facts
 file                          Manipulate files
 filter                        Manage permission filters
 foreign-input-set             Manage foreign input sets
 full-help                     Print help for all hammer commands
 global-parameter              Manipulate global parameters
 gpg                           Manipulate GPG Key actions on the server
 host                          Manipulate hosts
 host-collection               Manipulate host collections
 hostgroup                     Manipulate hostgroups
 import-templates              Import templates from a git repo or a directory on the server
 job-invocation                Manage job invocations
 job-template                  Manage job templates
 lifecycle-environment         Manipulate lifecycle_environments on the server
 location                      Manipulate locations
 medium                        Manipulate installation media
 model                         Manipulate hardware models
 module-stream                 View Module Streams
 organization                  Manipulate organizations
 os                            Manipulate operating system
 ostree-branch                 Manipulate ostree branches
 package                       Manipulate packages
 package-group                 Manipulate package groups
 partition-table               Manipulate partition tables
 ping                          Get the status of the server
 policy                        Manipulate policies
 product                       Manipulate products
 proxy                         Manipulate smart proxies
 puppet-class                  Search puppet modules
 puppet-environment            Manipulate Puppet environments
 puppet-module                 View Puppet Module details
 realm                         Manipulate realms
 recurring-logic               Recurring logic related actions
 remote-execution-feature      Manage remote execution features
 report                        Browse and read reports
 report-template               Manipulate report templates
 repository                    Manipulate repositories
 repository-set                Manipulate repository sets on the server
 role                          Manage user roles
 sc-param                      Manipulate smart class parameters
 scap-content                  Manipulate SCAP contents
 settings                      Change server settings
 shell                         Interactive shell
 smart-variable                Manipulate smart variables
 subnet                        Manipulate subnets
 subscription                  Manipulate subscriptions
 sync-plan                     Manipulate sync plans
 tailoring-file                Manipulate Tailoring files
 task                          Tasks related actions.
 template                      Manipulate config templates
 template-input                Manage template inputs
 user                          Manipulate users
 user-group                    Manage user groups
 virt-who-config               Manage Virt Who configurations

Options:
 --[no-]use-defaults           Enable/disable stored defaults. Enabled by default
 --autocomplete LINE           Get list of possible endings
 --csv                         Output as CSV (same as --output=csv)
 --csv-separator SEPARATOR     Character to separate the values
 --fetch-ca-cert SERVER        Fetch CA certificate from server and exit
 --interactive INTERACTIVE     Explicitly turn interactive mode on/off
                               One of true/false, yes/no, 1/0.
 --no-headers                  Hide headers from output
 --output ADAPTER              Set output format. One of [base, table, silent, csv, yaml, json]
 --output-file OUTPUT_FILE     Path to custom output file
 --show-ids                    Show ids of associated resources
 --ssl-ca-file CA_FILE         Configure the file containing the CA certificates
 --ssl-ca-path CA_PATH         Configure the directory containing the CA certificates
 --ssl-client-cert CERT_FILE   Configure the client's public certificate
 --ssl-client-key KEY_FILE     Configure the client's private key
 --ssl-with-basic-auth         Use standard authentication in addition to client certificate authentication
 --verify-ssl VERIFY_SSL       Configure SSL verification of remote system
                               One of true/false, yes/no, 1/0.
 --version                     Show version
 -c, --config CFG_FILE         Path to custom config file
 -d, --debug                   Show debugging output
 -h, --help                    Print help
 -p, --password PASSWORD       Password to access the remote system
 -q, --quiet                   Completely silent
 -r, --reload-cache            Force reload of Apipie cache
 -s, --server SERVER           Remote system address
 -u, --username USERNAME       Username to access the remote system
 -v, --[no-]verbose            Be verbose (or not). True by default

2.2. hammer activation-key

アクティベーションキーを操作します

Usage:
    hammer activation-key [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 add-host-collection           Associate a resource
 add-subscription              Add subscription
 content-override              Override product content defaults
 copy                          Copy an activation key
 create                        Create an activation key
 delete                        Destroy an activation key
 host-collections              List associated host collections
 info                          Show an activation key
 list                          List activation keys
 product-content               List associated products
 remove-host-collection        Disassociate a resource
 remove-subscription           Remove subscription
 subscriptions                 List associated subscriptions
 update                        Update an activation key

Options:
 -h, --help                    Print help

2.2.1. hammer activation-key add-host-collection

リソースを関連付けます。

Usage:
    hammer activation-key add-host-collection [OPTIONS]

Options:
 --host-collection HOST_COLLECTION_NAME  Host collection name to search by
 --host-collection-id HOST_COLLECTION_ID Id of the host collection
 --id ID                                 ID of the activation key
 --name NAME                             Activation key name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.2.2. hammer activation-key add-subscription

サブスクリプションを追加します。

Usage:
    hammer activation-key add-subscription [OPTIONS]

Options:
 --id ID                                 ID of the activation key
 --name NAME                             Activation key name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --quantity QUANTITY                     Quantity of this subscription to add
 --subscription-id SUBSCRIPTION_ID       ID of subscription
 -h, --help                              Print help

2.2.3. hammer activation-key content-override

製品コンテンツのデフォルトを上書きします。

Usage:
    hammer activation-key content-override [OPTIONS]

Options:
 --content-label CONTENT_LABEL           Label of the content
 --id ID                                 ID of the activation key
 --name NAME                             Activation key name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --override-name OVERRIDE_NAME           Override parameter key or name.
                                         To enable or disable a repo select 'enabled'.
                                         Default value: enabled
                                         Default: "enabled"
 --remove                                Remove a content override
 --value VALUE                           Override value. Note for repo enablement you can use a boolean value
 -h, --help                              Print help

2.2.4. hammer activation-key copy

アクティベーションキーをコピーします。

Usage:
    hammer activation-key copy [OPTIONS]

Options:
 --id ID                                 ID of the activation key
 --name NAME                             Activation key name to search by
 --new-name NEW_NAME                     Name of new activation key
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.2.5. hammer activation-key create

アクティベーションキーを作成します。

Usage:
    hammer activation-key create [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME                    Content view name to search by
 --content-view-id CONTENT_VIEW_ID                   Content view numeric identifier
 --description DESCRIPTION                           Description
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
 --environment-id ENVIRONMENT_ID                     (--environment-id is deprecated: Use --lifecycle-environment-id instead)
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME  Lifecycle environment name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
 --max-hosts MAX_HOSTS                               Maximum number of registered content hosts
 --name NAME                                         Name
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 --unlimited-hosts                                   Set hosts max to unlimited
 -h, --help                                          Print help

2.2.6. hammer activation-key delete

アクティベーションキーを破棄します。

Usage:
    hammer activation-key delete [OPTIONS]

Options:
 --id ID                                 ID of the activation key
 --name NAME                             Activation key name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.2.7. hammer activation-key host-collections

関連付けられているホストコレクションを一覧表示します。

Usage:
    hammer activation-key host-collections [OPTIONS]

Options:
 --available-for AVAILABLE_FOR           Interpret specified object to return only Host Collections that can be
                                         Associated with specified object. The value 'host' is supported.
 --full-result FULL_RESULT               Whether or not to show all results
                                         One of true/false, yes/no, 1/0.
 --host-id HOST_ID                       Filter products by host id
 --id ID                                 ID of activation key
 --name NAME                             Name of activation key
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --sort-by SORT_BY                       Field to sort the results on
 --sort-order SORT_ORDER                 How to order the sorted results (e.g. ASC for ascending)
 -h, --help                              Print help

2.2.8. hammer activation-key info

アクティベーションキーを表示します。

Usage:
    hammer activation-key info [OPTIONS]

Options:
 --id ID                                 ID of the activation key
 --name NAME                             Activation key name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.2.9. hammer activation-key list

アクティベーションキーを一覧表示します。

Usage:
    hammer activation-key list [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME                    Content view name to search by
 --content-view-id CONTENT_VIEW_ID                   Content view numeric identifier
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
 --environment-id ENVIRONMENT_ID                     (--environment-id is deprecated: Use --lifecycle-environment-id instead)
 --full-result FULL_RESULT                           Whether or not to show all results
                                                     One of true/false, yes/no, 1/0.
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME  Lifecycle environment name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
 --name NAME                                         Activation key name to filter by
 --order ORDER                                       Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 --page PAGE                                         Page number, starting at 1
 --per-page PER_PAGE                                 Number of results per page to return
 --search SEARCH                                     Search string
 -h, --help                                          Print help

2.2.10. hammer activation-key product-content

関連付けられた製品を一覧表示します。

Usage:
    hammer activation-key product-content [OPTIONS]

Options:
 --content-access-mode-all CONTENT_ACCESS_MODE_ALL Get all content available, not just that provided by subscriptions
                                                   One of true/false, yes/no, 1/0.
 --content-access-mode-env CONTENT_ACCESS_MODE_ENV Limit content to just that available in the activation key's content
                                                   View version
                                                   One of true/false, yes/no, 1/0.
 --id ID                                           ID of the activation key
 --name NAME                                       Activation key name to search by
 --organization ORGANIZATION_NAME                  Organization name to search by
 --organization-id ORGANIZATION_ID                 Organization ID
 --organization-label ORGANIZATION_LABEL           Organization label to search by
 -h, --help                                        Print help

2.2.11. hammer activation-key remove-host-collection

リソースの関連付けを解除します。

Usage:
    hammer activation-key remove-host-collection [OPTIONS]

Options:
 --host-collection HOST_COLLECTION_NAME  Host collection name to search by
 --host-collection-id HOST_COLLECTION_ID Id of the host collection
 --id ID                                 ID of the activation key
 --name NAME                             Activation key name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.2.12. hammer activation-key remove-subscription

サブスクリプションを削除します。

Usage:
    hammer activation-key remove-subscription [OPTIONS]

Options:
 --id ID                                 ID of the activation key
 --name NAME                             Activation key name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --subscription-id SUBSCRIPTION_ID       ID of subscription
 -h, --help                              Print help

2.2.13. hammer activation-key subscriptions

関連付けられたサブスクリプションを一覧表示します。

Usage:
    hammer activation-key subscriptions [OPTIONS]

Options:
 --activation-key ACTIVATION_KEY_NAME    Activation key name to search by
 --activation-key-id ACTIVATION_KEY_ID   ID of the activation key
 --available-for AVAILABLE_FOR           Object to show subscriptions available for, either 'host' or
                                         'activation_key'
 --full-result FULL_RESULT               Whether or not to show all results
                                         One of true/false, yes/no, 1/0.
 --host HOST_NAME                        Host name
 --host-id HOST_ID
 --id ACTIVATION_KEY_ID                  ID of the activation key
 --match-host MATCH_HOST                 Ignore subscriptions that are unavailable to the specified host
                                         One of true/false, yes/no, 1/0.
 --match-installed MATCH_INSTALLED       Return subscriptions that match installed products of the specified host
                                         One of true/false, yes/no, 1/0.
 --name ACTIVATION_KEY_NAME              Activation key name to search by
 --no-overlap NO_OVERLAP                 Return subscriptions which do not overlap with a currently-attached
                                         Subscription
                                         One of true/false, yes/no, 1/0.
 --order ORDER                           Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --page PAGE                             Page number, starting at 1
 --per-page PER_PAGE                     Number of results per page to return
 --search SEARCH                         Search string
 -h, --help                              Print help

2.2.14. hammer activation-key update

アクティベーションキーを更新します。

Usage:
    hammer activation-key update [OPTIONS]

Options:
 --auto-attach AUTO_ATTACH                           Auto attach subscriptions upon registration
                                                     One of true/false, yes/no, 1/0.
 --content-view CONTENT_VIEW_NAME                    Content view name to search by
 --content-view-id CONTENT_VIEW_ID                   Content view numeric identifier
 --description DESCRIPTION                           Description
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
 --environment-id ENVIRONMENT_ID                     (--environment-id is deprecated: Use --lifecycle-environment-id instead)
 --id ID                                             ID of the activation key
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME  Lifecycle environment name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
 --max-hosts MAX_HOSTS                               Maximum number of registered content hosts
 --name NAME                                         Activation key name to search by
 --new-name NEW_NAME                                 Name
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 --release-version RELEASE_VERSION                   Content release version
 --service-level SERVICE_LEVEL                       Service level
 --unlimited-hosts                                   Set hosts max to unlimited
 -h, --help                                          Print help

2.3. hammer admin

サーバー側の管理タスクです。

Usage:
    hammer admin [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 logging                       Logging verbosity level setup

Options:
 -h, --help                    Print help

2.3.1. hammer admin logging

ロギングの詳細レベルを設定します。

Usage:
    hammer admin logging [OPTIONS]

Options:
 --no-backup                   Skip configuration backups creation.
 --prefix PATH                 Operate on prefixed environment (e.g. chroot).
 -a, --all                     Apply to all components.
 -c, --components COMPONENTS   Components to apply, use --list to get them.
                               Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                               JSON is acceptable and preferred way for complex parameters
 -d, --level-debug             Increase verbosity level to debug.
 -h, --help                    Print help
 -l, --list                    List available components.
 -n, --dry-run                 Do not apply specified changes.
 -p, --level-production        Decrease verbosity level to standard.

2.4. hammer ansible

foreman ansible を管理します。

Usage:
    hammer ansible [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 roles                         Manage ansible roles
 variables                     Manage ansible variables

Options:
 -h, --help                    Print help

2.4.1. hammer ansible roles

Ansible ロールを管理します。

Usage:
    hammer ansible roles [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 delete                        Deletes Ansible role
 fetch                         Fetch Ansible roles available to be imported
 import                        Import Ansible roles
 info                          Show role
 list                          List Ansible roles
 obsolete                      Obsolete Ansible roles
 play-hostgroups               Plays Ansible roles on hostgroups
 play-hosts                    Plays Ansible roles on hosts

Options:
 -h, --help                    Print help

2.4.1.1. hammer ansible roles delete

Ansible ロールを削除します。

Usage:
    hammer ansible roles delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.4.1.2. hammer ansible roles fetch

インポート可能な Ansible ロールを取得します。

Usage:
    hammer ansible roles fetch [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --proxy-id PROXY_ID                     Capsule to fetch from
 -h, --help                              Print help

2.4.1.3. hammer ansible roles import

Ansible ロールをインポートします。

Usage:
    hammer ansible roles import [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --proxy-id PROXY_ID                     Capsule to import from
 --role-names ROLE_NAMES                 Ansible role names to import
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 -h, --help                              Print help

2.4.1.4. hammer ansible roles info

ロールを表示します。

Usage:
    hammer ansible roles info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.4.1.5. hammer ansible roles list

Ansible ロールを一覧表示します。

Usage:
    hammer ansible roles list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  host                string
  host_id             integer
  hostgroup           string
  hostgroup_id        integer
  id                  integer
  name                string
  updated_at          datetime

2.4.1.6. hammer ansible roles obsolete

Ansible ロールを使用停止します。

Usage:
    hammer ansible roles obsolete [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --proxy-id PROXY_ID                     Capsule to import from
 -h, --help                              Print help

2.4.1.7. hammer ansible roles play-hostgroups

ホストグループに対する Ansible ロールをプレイします。

Usage:
    hammer ansible roles play-hostgroups [OPTIONS]

Options:
 --hostgroup-ids HOSTGROUP_IDS           IDs of hostgroups to play roles on
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --hostgroup-titles HOSTGROUP_TITLES     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --hostgroups HOSTGROUP_NAMES            Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.4.1.8. hammer ansible roles play-hosts

ホストに対する Ansible ロールをプレイします。

Usage:
    hammer ansible roles play-hosts [OPTIONS]

Options:
 --host-ids HOST_IDS                     IDs of hosts to play roles on
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --hosts HOST_NAMES                      Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.4.2. hammer ansible variables

Ansible 変数を管理します。

Usage:
    hammer ansible variables [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 add-matcher                   Create an override value for a specific ansible variable
 create                        Create Ansible variable
 delete                        Deletes Ansible variable
 import                        Import Ansible variables. This will only import variables for already existing roles, it will not import any new roles
 info                          Show variable
 list                          List Ansible variables
 obsolete                      Obsolete Ansible variables. This will only obsolete variables for already existing roles, it will not delete any old roles
 remove-matcher                Destroy an override value
 update                        Updates Ansible variable

Options:
 -h, --help                    Print help

2.4.2.1. hammer ansible variables add-matcher

特定の Ansible 変数のオーバーライド値を作成します。

Usage:
    hammer ansible variables add-matcher [OPTIONS]

Options:
 --ansible-variable ANSIBLE_VARIABLE_NAME  Name to search by
 --ansible-variable-id ANSIBLE_VARIABLE_ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE           Location title
 --match MATCH                             Override match
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-title ORGANIZATION_TITLE   Organization title
 --value VALUE                             Override value, required if omit is false
 -h, --help                                Print help

2.4.2.2. hammer ansible variables create

Ansible 変数を作成します。

Usage:
    hammer ansible variables create [OPTIONS]

Options:
 --ansible-role ANSIBLE_ROLE_NAME            Name to search by
 --ansible-role-id ANSIBLE_ROLE_ID
 --avoid-duplicates AVOID_DUPLICATES         Remove duplicate values (only array type)
                                             One of true/false, yes/no, 1/0.
 --default-value DEFAULT_VALUE               Default value of variable
 --description DESCRIPTION                   Description of variable
 --hidden-value HIDDEN_VALUE                 When enabled the parameter is hidden in the UI
                                             One of true/false, yes/no, 1/0.
 --location LOCATION_NAME                    Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE             Location title
 --merge-default MERGE_DEFAULT               Include default value when merging all matching values
                                             One of true/false, yes/no, 1/0.
 --merge-overrides MERGE_OVERRIDES           Merge all matching values (only array/hash type)
                                             One of true/false, yes/no, 1/0.
 --organization ORGANIZATION_NAME            Organization name
 --organization-id ORGANIZATION_ID           Organization ID
 --organization-title ORGANIZATION_TITLE     Organization title
 --override OVERRIDE                         Whether to override variable or not
                                             One of true/false, yes/no, 1/0.
 --override-value-order OVERRIDE_VALUE_ORDER The order in which values are resolved
 --validator-rule VALIDATOR_RULE             Used to enforce certain values for the parameter values
 --validator-type VALIDATOR_TYPE             Types of validation values
                                             Possible value(s): 'regexp', 'list'
 --variable VARIABLE                         Name of variable
 --variable-type VARIABLE_TYPE               Types of variable values
                                             Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json'
 -h, --help                                  Print help

2.4.2.3. hammer ansible variables delete

Ansible 変数を削除します。

Usage:
    hammer ansible variables delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.4.2.4. hammer ansible variables import

Ansible 変数をインポートします。既存のロールの変数のみをインポートし、新規ロールはインポートしません。

Usage:
    hammer ansible variables import [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --proxy-id PROXY_ID                     Capsule to import from
 -h, --help                              Print help

2.4.2.5. hammer ansible variables info

変数を表示します。

Usage:
    hammer ansible variables info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.4.2.6. hammer ansible variables list

Ansible 変数を一覧表示します。

Usage:
    hammer ansible variables list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  ansible_role        string
  avoid_duplicates    Values: true, false
  imported            Values: true, false
  key                 string
  merge_default       Values: true, false
  merge_overrides     Values: true, false
  name                string
  override            Values: true, false
  parameter           string

2.4.2.7. hammer ansible variables obsolete

Ansible 変数が使用されなようにします。既存のロールの変数のみを使用されないようにするだけで、古くなったロールを削除するわけではありません。

Usage:
    hammer ansible variables obsolete [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --proxy-id PROXY_ID                     Capsule to import from
 -h, --help                              Print help

2.4.2.8. hammer ansible variables remove-matcher

オーバーライド値を破棄します。

Usage:
    hammer ansible variables remove-matcher [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.4.2.9. hammer ansible variables update

Ansible 変数を更新します。

Usage:
    hammer ansible variables update [OPTIONS]

Options:
 --ansible-role ANSIBLE_ROLE_NAME            Name to search by
 --ansible-role-id ANSIBLE_ROLE_ID
 --avoid-duplicates AVOID_DUPLICATES         Remove duplicate values (only array type)
                                             One of true/false, yes/no, 1/0.
 --default-value DEFAULT_VALUE               Default value of variable
 --description DESCRIPTION                   Description of variable
 --hidden-value HIDDEN_VALUE                 When enabled the parameter is hidden in the UI
                                             One of true/false, yes/no, 1/0.
 --id ID
 --location LOCATION_NAME                    Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE             Location title
 --merge-default MERGE_DEFAULT               Include default value when merging all matching values
                                             One of true/false, yes/no, 1/0.
 --merge-overrides MERGE_OVERRIDES           Merge all matching values (only array/hash type)
                                             One of true/false, yes/no, 1/0.
 --name NAME                                 Name to search by
 --new-name NEW_NAME
 --organization ORGANIZATION_NAME            Organization name
 --organization-id ORGANIZATION_ID           Organization ID
 --organization-title ORGANIZATION_TITLE     Organization title
 --override OVERRIDE                         Whether to override variable or not
                                             One of true/false, yes/no, 1/0.
 --override-value-order OVERRIDE_VALUE_ORDER The order in which values are resolved
 --validator-rule VALIDATOR_RULE             Used to enforce certain values for the parameter values
 --validator-type VALIDATOR_TYPE             Types of validation values
                                             Possible value(s): 'regexp', 'list'
 --variable VARIABLE                         Name of variable
 --variable-type VARIABLE_TYPE               Types of variable values
                                             Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json'
 -h, --help                                  Print help

2.5. hammer architecture

アーキテクチャーを操作します。

Usage:
    hammer architecture [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 add-operatingsystem           Associate an operating system
 create                        Create an architecture
 delete                        Delete an architecture
 info                          Show an architecture
 list                          List all architectures
 remove-operatingsystem        Disassociate an operating system
 update                        Update an architecture

Options:
 -h, --help                    Print help

2.5.1. hammer architecture add-operatingsystem

オペレーティングシステムを関連付けます。

Usage:
    hammer architecture add-operatingsystem [OPTIONS]

Options:
 --id ID
 --name NAME                             Architecture name
 --operatingsystem OPERATINGSYSTEM_TITLE Operating system title
 --operatingsystem-id OPERATINGSYSTEM_ID
 -h, --help                              Print help

2.5.2. hammer architecture create

アーキテクチャーを作成します。

Usage:
    hammer architecture create [OPTIONS]

Options:
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE           Location title
 --name NAME
 --operatingsystem-ids OPERATINGSYSTEM_IDS Operating system IDs
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --operatingsystems OPERATINGSYSTEM_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-title ORGANIZATION_TITLE   Organization title
 -h, --help                                Print help

2.5.3. hammer architecture delete

アーキテクチャーを削除します。

Usage:
    hammer architecture delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Architecture name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.5.4. hammer architecture info

アーキテクチャーを表示します。

Usage:
    hammer architecture info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Architecture name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.5.5. hammer architecture list

アーキテクチャーの一覧を表示します。

Usage:
    hammer architecture list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --operatingsystem OPERATINGSYSTEM_TITLE Operating system title
 --operatingsystem-id OPERATINGSYSTEM_ID
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  name                string

2.5.6. hammer architecture remove-operatingsystem

オペレーティングシステムの関連付けを解除します。

Usage:
    hammer architecture remove-operatingsystem [OPTIONS]

Options:
 --id ID
 --name NAME                             Architecture name
 --operatingsystem OPERATINGSYSTEM_TITLE Operating system title
 --operatingsystem-id OPERATINGSYSTEM_ID
 -h, --help                              Print help

2.5.7. hammer architecture update

アーキテクチャーを更新します。

Usage:
    hammer architecture update [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE           Location title
 --name NAME                               Architecture name
 --new-name NEW_NAME
 --operatingsystem-ids OPERATINGSYSTEM_IDS Operating system IDs
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --operatingsystems OPERATINGSYSTEM_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-title ORGANIZATION_TITLE   Organization title
 -h, --help                                Print help

2.6. hammer arf-report

コンプライアンスレポートを操作します。

Usage:
    hammer arf-report [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 delete                        Delete an ARF Report
 download                      Download bzipped ARF report
 download-html                 Download ARF report in HTML
 info                          Show an ARF report
 list                          List ARF reports

Options:
 -h, --help                    Print help

2.6.1. hammer arf-report delete

ARF レポートを削除します。

Usage:
    hammer arf-report delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME          Name to search by
 --location-id LOCATION_ID
 --organization ORGANIZATION_NAME  Name to search by
 --organization-id ORGANIZATION_ID Organization ID
 -h, --help                        Print help

2.6.2. hammer arf-report download

bzip された ARF レポートをダウンロードします。

Usage:
    hammer arf-report download [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME          Name to search by
 --location-id LOCATION_ID
 --organization ORGANIZATION_NAME  Name to search by
 --organization-id ORGANIZATION_ID Organization ID
 --path PATH                       Path to directory where downloaded file will be saved
 -h, --help                        Print help

2.6.3. hammer arf-report download-html

HTML 形式で ARF レポートをダウンロードします。

Usage:
    hammer arf-report download-html [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME          Name to search by
 --location-id LOCATION_ID
 --organization ORGANIZATION_NAME  Name to search by
 --organization-id ORGANIZATION_ID Organization ID
 --path PATH                       Path to directory where downloaded file will be saved
 -h, --help                        Print help

2.6.4. hammer arf-report info

ARF レポートを表示します。

Usage:
    hammer arf-report info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME          Name to search by
 --location-id LOCATION_ID
 --organization ORGANIZATION_NAME  Name to search by
 --organization-id ORGANIZATION_ID Organization ID
 -h, --help                        Print help

2.6.5. hammer arf-report list

ARF レポートを一覧表示します。

Usage:
    hammer arf-report list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  compliance_policy      string
  compliance_status      Values: compliant, incompliant, inconclusive
  comply_with            string
  environment            string
  eventful               Values: true, false
  host                   string
  host_collection        string
  host_id                integer
  hostgroup              string
  hostgroup_fullname     string
  hostgroup_title        string
  inconclusive_with      string
  last_for               Values: host, policy
  last_report            datetime
  lifecycle_environment  string
  location               string
  location_id            integer
  log                    text
  not_comply_with        string
  openscap_proxy         string
  organization           string
  organization_id        integer
  origin                 string
  policy                 string
  reported               datetime
  resource               text
  xccdf_rule_failed      string
  xccdf_rule_name        text
  xccdf_rule_othered     string
  xccdf_rule_passed      string

2.7. hammer audit

監査証跡を検索します。

Usage:
    hammer audit [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 info                          Show an audit
 list                          List all audits

Options:
 -h, --help                    Print help

2.7.1. hammer audit info

監査を表示します。

Usage:
    hammer audit info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.7.2. hammer audit list

すべての監査を一覧表示します。

Usage:
    hammer audit list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  action                 Values: create, update, delete
  auditable_id           integer
  changes                text
  comment                string
  host                   string
  hostgroup              string
  hostgroup_title        string
  id                     integer
  interface_fqdn         string
  interface_ip           string
  interface_mac          string
  location               string
  location_id            integer
  organization           string
  organization_id        integer
  os                     string
  os_title               string
  parameter              string
  partition_table        string
  provisioning_template  string
  puppetclass            string
  remote_address         string
  setting                string
  time                   datetime
  type                   Values: role, ptable, provisioning_template, user, filter, subnet, hostgroup, smart_proxy, katello/host/content_facet, katello/host/subscription_facet, remote_execution_feature, usergroup, katello/content_view, katello/kt_environment, realm, job_template, bookmark, lookup_value, model, domain, environment, architecture, image, ansible_role, hostgroup_class, puppetclass, medium, auth_source, compute_resource, host, interface, location, organization, os, override_value, parameter, partition_table, setting, smart_class_parameter, smart_variable
  user                   string
  username               string

2.8. hammer auth

Foreman 接続をログイン/ログアウトします。

Usage:
    hammer auth [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 login                         Set credentials
 logout                        Wipe your credentials
 status                        Information about current connections

Options:
 -h, --help                    Print help

2.8.1. hammer auth login

資格情報を設定します。

Usage:
    hammer auth login [OPTIONS]

Options:
 -h, --help                    Print help
 -p, --password PASSWORD       Password to access the remote system
 -u, --username USERNAME       Username to access the remote system

2.8.2. hammer auth logout

資格情報を消去します。

Usage:
    hammer auth logout [OPTIONS]

Options:
 -h, --help                    Print help

2.8.3. hammer auth status

現在の接続に関する情報

Usage:
    hammer auth status [OPTIONS]

Options:
 -h, --help                    Print help

2.9. hammer auth-source

認証ソースを操作します。

Usage:
    hammer auth-source [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 ldap                          Manage LDAP auth sources
 list                          List all auth sources

Options:
 -h, --help                    Print help

2.9.1. hammer auth-source ldap

LDAP 認証ソースを管理します。

Usage:
    hammer auth-source ldap [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 create                        Create an LDAP authentication source
 delete                        Delete an LDAP authentication source
 info                          Show an LDAP authentication source
 list                          List all LDAP authentication sources
 update                        Update an LDAP authentication source

Options:
 -h, --help                    Print help

2.9.1.1. hammer auth-source ldap create

LDAP 認証ソースを作成します。

Usage:
    hammer auth-source ldap create [OPTIONS]

Options:
 --account ACCOUNT
 --account-password ACCOUNT_PASSWORD       Required if onthefly_register is true
 --attr-firstname ATTR_FIRSTNAME           Required if onthefly_register is true
 --attr-lastname ATTR_LASTNAME             Required if onthefly_register is true
 --attr-login ATTR_LOGIN                   Required if onthefly_register is true
 --attr-mail ATTR_MAIL                     Required if onthefly_register is true
 --attr-photo ATTR_PHOTO
 --base-dn BASE_DN
 --groups-base GROUPS_BASE                 Groups base DN
 --host HOST
 --ldap-filter LDAP_FILTER                 LDAP filter
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --name NAME
 --onthefly-register ONTHEFLY_REGISTER     One of true/false, yes/no, 1/0.
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --port PORT                               Defaults to 389
 --server-type SERVER_TYPE                 Type of the LDAP server
                                           Possible value(s): 'free_ipa', 'active_directory', 'posix'
 --tls TLS                                 One of true/false, yes/no, 1/0.
 --use-netgroups USE_NETGROUPS             Use NIS netgroups instead of posix groups, applicable only when server_type
                                           Is posix or free_ipa
                                           One of true/false, yes/no, 1/0.
 --usergroup-sync USERGROUP_SYNC           Sync external user groups on login
                                           One of true/false, yes/no, 1/0.
 -h, --help                                Print help

2.9.1.2. hammer auth-source ldap delete

LDAP 認証ソースを削除します。

Usage:
    hammer auth-source ldap delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.9.1.3. hammer auth-source ldap info

LDAP 認証ソースを表示します。

Usage:
    hammer auth-source ldap info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.9.1.4. hammer auth-source ldap list

LDAP 認証ソースの一覧を表示します。

Usage:
    hammer auth-source ldap list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  location            string
  location_id         integer
  name                string
  organization        string
  organization_id     integer

2.9.1.5. hammer auth-source ldap update

LDAP 認証ソースを更新します。

Usage:
    hammer auth-source ldap update [OPTIONS]

Options:
 --account ACCOUNT
 --account-password ACCOUNT_PASSWORD       Required if onthefly_register is true
 --attr-firstname ATTR_FIRSTNAME           Required if onthefly_register is true
 --attr-lastname ATTR_LASTNAME             Required if onthefly_register is true
 --attr-login ATTR_LOGIN                   Required if onthefly_register is true
 --attr-mail ATTR_MAIL                     Required if onthefly_register is true
 --attr-photo ATTR_PHOTO
 --base-dn BASE_DN
 --groups-base GROUPS_BASE                 Groups base DN
 --host HOST
 --id ID
 --ldap-filter LDAP_FILTER                 LDAP filter
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --name NAME                               Name to search by
 --new-name NEW_NAME
 --onthefly-register ONTHEFLY_REGISTER     One of true/false, yes/no, 1/0.
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --port PORT                               Defaults to 389
 --server-type SERVER_TYPE                 Type of the LDAP server
                                           Possible value(s): 'free_ipa', 'active_directory', 'posix'
 --tls TLS                                 One of true/false, yes/no, 1/0.
 --use-netgroups USE_NETGROUPS             Use NIS netgroups instead of posix groups, applicable only when server_type
                                           Is posix or free_ipa
                                           One of true/false, yes/no, 1/0.
 --usergroup-sync USERGROUP_SYNC           Sync external user groups on login
                                           One of true/false, yes/no, 1/0.
 -h, --help                                Print help

2.9.2. hammer auth-source list

すべての認証ソースを一覧表示します。

Usage:
    hammer auth-source list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

2.10. hammer bootdisk

ブートディスクをダウンロードします。

Usage:
    hammer bootdisk [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 generic                       Download generic image
 host                          Download host image
 subnet                        Download subnet generic image

Options:
 -h, --help                    Print help

2.10.1. hammer bootdisk generic

汎用イメージをダウンロードします。

Usage:
    hammer bootdisk generic [OPTIONS]

Options:
 --file PATH                             File or device to write image to
 --force                                 Force writing to existing destination (device etc.)
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --sudo                                  Use sudo to write to device
 -h, --help                              Print help

2.10.2. hammer bootdisk host

ホストイメージをダウンロードします。

Usage:
    hammer bootdisk host [OPTIONS]

Options:
 --file PATH                             File or device to write image to
 --force                                 Force writing to existing destination (device etc.)
 --full FULL                             True for full, false for basic reusable image
                                         One of true/false, yes/no, 1/0.
 --host HOST_NAME                        Host name
 --host-id HOST_ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --sudo                                  Use sudo to write to device
 -h, --help                              Print help

2.10.3. hammer bootdisk subnet

サブネット汎用イメージをダウンロードします。

Usage:
    hammer bootdisk subnet [OPTIONS]

Options:
 --file PATH                             File or device to write image to
 --force                                 Force writing to existing destination (device etc.)
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --subnet SUBNET_NAME                    Subnet name
 --subnet-id SUBNET_ID
 --sudo                                  Use sudo to write to device
 -h, --help                              Print help

2.11. hammer capsule

Capsule を操作します。

Usage:
    hammer capsule [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 content                       Manage the capsule content
 create                        Create a capsule
 delete                        Delete a capsule
 import-classes                Import puppet classes from puppet Capsule
 info                          Show a capsule
 list                          List all capsules
 refresh-features              Refresh capsule features
 update                        Update a capsule

Options:
 -h, --help                    Print help

2.11.1. hammer capsule content

Capsule コンテンツを管理します。

Usage:
    hammer capsule content [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 add-lifecycle-environment        Add lifecycle environments to the capsule
 available-lifecycle-environments List the lifecycle environments not attached to the capsule
 cancel-synchronization           Cancel running capsule synchronization
 info                             Get current capsule synchronization status
 lifecycle-environments           List the lifecycle environments attached to the capsule
 remove-lifecycle-environment     Remove lifecycle environments from the capsule
 synchronization-status           Get current capsule synchronization status
 synchronize                      Synchronize the content to the capsule

Options:
 -h, --help                    Print help

2.11.1.1. hammer capsule content add-lifecycle-environment

ライフサイクル環境を Capsule に追加します。

Usage:
    hammer capsule content add-lifecycle-environment [OPTIONS]

Options:
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
 --environment-id ENVIRONMENT_ID                     (--environment-id is deprecated: Use --lifecycle-environment-id instead)
 --id ID                                             Id of the capsule
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME  Lifecycle environment name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
 --name NAME                                         Name to search by
 --organization NAME                                 Organization name
 --organization-id ID                                Organization ID
 -h, --help                                          Print help

2.11.1.2. hammer capsule content available-lifecycle-environments

Capsule に割り当てられていないライフサイクル環境を一覧表示します。

Usage:
    hammer capsule content available-lifecycle-environments [OPTIONS]

Options:
 --id ID                                 Id of the capsule
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.11.1.3. hammer capsule content cancel-synchronization

実行中の Capsule 同期をキャンセルします。

Usage:
    hammer capsule content cancel-synchronization [OPTIONS]

Options:
 --id ID                       Id of the capsule
 --name NAME                   Name to search by
 -h, --help                    Print help

2.11.1.4. hammer capsule content info

現在の Capsule 同期ステータスを取得します。

Usage:
    hammer capsule content info [OPTIONS]

Options:
 --id ID                                 Id of the capsule
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.11.1.5. hammer capsule content lifecycle-environments

Capsule に割り当てられたライフサイクル環境を一覧表示します。

Usage:
    hammer capsule content lifecycle-environments [OPTIONS]

Options:
 --id ID                                 Id of the capsule
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.11.1.6. hammer capsule content remove-lifecycle-environment

ライフサイクル環境を Capsule から削除します。

Usage:
    hammer capsule content remove-lifecycle-environment [OPTIONS]

Options:
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
 --environment-id ENVIRONMENT_ID                     (--environment-id is deprecated: Use --lifecycle-environment-id instead)
 --id ID                                             Id of the capsule
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME  Lifecycle environment name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
 --name NAME                                         Name to search by
 --organization NAME                                 Organization name
 --organization-id ID                                Organization ID
 -h, --help                                          Print help

2.11.1.7. hammer capsule content synchronization-status

現在の Capsule 同期ステータスを取得します。

Usage:
    hammer capsule content synchronization-status [OPTIONS]

Options:
 --id ID                                 Id of the capsule
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.11.1.8. hammer capsule content synchronize

コンテンツと Capsule を同期します。

Usage:
    hammer capsule content synchronize [OPTIONS]

Options:
 --async                                             Do not wait for the task
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
 --environment-id ENVIRONMENT_ID                     (--environment-id is deprecated: Use --lifecycle-environment-id instead)
 --id ID                                             Id of the capsule
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME  Lifecycle environment name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
 --name NAME                                         Name to search by
 --organization NAME                                 Organization name
 --organization-id ID                                Organization ID
 --skip-metadata-check SKIP_METADATA_CHECK           Skip metadata check on each repository on the capsule
                                                     One of true/false, yes/no, 1/0.
 -h, --help                                          Print help

2.11.2. hammer capsule create

Capsule を作成します。

Usage:
    hammer capsule create [OPTIONS]

Options:
 --download-policy DOWNLOAD_POLICY         Download Policy of the capsule, must be one of immediate, on_demand,
                                           Background, inherit
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --name NAME
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --url URL
 -h, --help                                Print help

2.11.3. hammer capsule delete

Capsule を削除します。

Usage:
    hammer capsule delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.11.4. hammer capsule import-classes

Puppet Capsule から puppet クラスをインポートします。

Usage:
    hammer capsule import-classes [OPTIONS]

Options:
 --dryrun                                      Do not run the import
 --environment ENVIRONMENT_NAME                Environment name (--environment is deprecated: Use --puppet-environment instead)
 --environment-id ENVIRONMENT_ID               (--environment-id is deprecated: Use --puppet-environment-id instead)
 --except EXCEPT                               Optional comma-delimited string containing either 'new',
                                               'updated', or 'obsolete' that is used to limit the imported
                                               Puppet classes
 --id ID
 --location LOCATION_NAME                      Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE               Location title
 --name NAME                                   Name to search by
 --organization ORGANIZATION_NAME              Organization name
 --organization-id ORGANIZATION_ID             Organization ID
 --organization-title ORGANIZATION_TITLE       Organization title
 --puppet-environment PUPPET_ENVIRONMENT_NAME  Puppet environment name
 --puppet-environment-id PUPPET_ENVIRONMENT_ID
 -h, --help                                    Print help

2.11.5. hammer capsule info

Capsule を表示します。

Usage:
    hammer capsule info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.11.6. hammer capsule list

Capsule を一覧表示します。

Usage:
    hammer capsule list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  feature             string
  location            string
  location_id         integer
  name                string
  organization        string
  organization_id     integer
  url                 string

2.11.7. hammer capsule refresh-features

Capsule 機能をリフレッシュします。

Usage:
    hammer capsule refresh-features [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.11.8. hammer capsule update

Capsule を更新します。

Usage:
    hammer capsule update [OPTIONS]

Options:
 --download-policy DOWNLOAD_POLICY         Download Policy of the capsule, must be one of immediate, on_demand,
                                           Background, inherit
 --id ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --name NAME                               Name to search by
 --new-name NEW_NAME
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --url URL
 -h, --help                                Print help

2.12. hammer compute-profile

コンピュートプロファイルを操作します。

Usage:
    hammer compute-profile [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 create                        Create a compute profile
 delete                        Delete a compute profile
 info                          Show a compute profile
 list                          List of compute profiles
 update                        Update a compute profile
 values                        Create update and delete Compute profile values

Options:
 -h, --help                    Print help

2.12.1. hammer compute-profile create

コンピュートプロファイルを作成します。

Usage:
    hammer compute-profile create [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.12.2. hammer compute-profile delete

コンピュートプロファイルを削除します。

Usage:
    hammer compute-profile delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Compute profile name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.12.3. hammer compute-profile info

コンピュートプロファイルを表示します。

Usage:
    hammer compute-profile info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Compute profile name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.12.4. hammer compute-profile list

コンピュートプロファイルを一覧表示します。

Usage:
    hammer compute-profile list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  name                string

2.12.5. hammer compute-profile update

コンピュートプロファイルを更新します。

Usage:
    hammer compute-profile update [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Compute profile name
 --new-name NEW_NAME
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.12.6. hammer compute-profile values

コンピュートプロファイルの値を作成、更新、削除します。

Usage:
    hammer compute-profile values [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 add-interface                 Add interface for Compute Profile
 add-volume                    Add volume for Compute Profile
 create                        Create compute profile set of values
 remove-interface              Remove compute profile interface
 remove-volume                 Remove compute profile volume
 update                        Update compute profile values
 update-interface              Update compute profile interface
 update-volume                 Update compute profile volume

Options:
 -h, --help                    Print help

2.12.6.1. hammer compute-profile values add-interface

コンピュートプロファイルのインターフェースを追加します。

Usage:
    hammer compute-profile values add-interface [OPTIONS]

Options:
 --compute-profile COMPUTE_PROFILE_NAME    Compute profile name
 --compute-profile-id COMPUTE_PROFILE_ID
 --compute-resource COMPUTE_RESOURCE_NAME  Compute resource name
 --compute-resource-id COMPUTE_RESOURCE_ID
 --interface SET_VALUES                    Interface parameters, should be comma separated list of values
                                           Comma-separated list of key=value.
                                           JSON is acceptable and preferred way for complex parameters
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE           Location title
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-title ORGANIZATION_TITLE   Organization title
 -h, --help                                Print help

Provider specific options:
  ec2:
    --interface:

  gce:
    --interface:

  libvirt:
    --interface:
      compute_type        Possible values: bridge, network
      compute_bridge      Name of interface according to type
      compute_model       Possible values: virtio, rtl8139, ne2k_pci, pcnet, e1000

  openstack:
    --interface:

  ovirt:
    --interface:
      compute_name        Compute name, e.g. eth0
      compute_network     Select one of available networks for a cluster, must be an ID
      compute_interface   Interface type

  rackspace:
    --interface:

  vmware:
    --interface:
      compute_type        Type of the network adapter, for example one of:
                            VirtualVmxnet3,
                            VirtualE1000
                          See documentation center for your version of vSphere to find more details about available adapter types:
                            https://www.vmware.com/support/pubs/
      compute_network     Network ID from VMware

2.12.6.2. hammer compute-profile values add-volume

コンピュートプロファイルのボリュームを追加します。

Usage:
    hammer compute-profile values add-volume [OPTIONS]

Options:
 --compute-profile COMPUTE_PROFILE_NAME    Compute profile name
 --compute-profile-id COMPUTE_PROFILE_ID
 --compute-resource COMPUTE_RESOURCE_NAME  Compute resource name
 --compute-resource-id COMPUTE_RESOURCE_ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE           Location title
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-title ORGANIZATION_TITLE   Organization title
 --volume VOLUME                           Volume parameters, should be comma separated list of values
                                           Comma-separated list of key=value.
                                           JSON is acceptable and preferred way for complex parameters
 -h, --help                                Print help

Provider specific options:
  ec2:
    --volume:

  gce:
    --volume:

  libvirt:
    --volume:
      pool_name           One of available storage pools
      capacity            String value, eg. 10G
      format_type         Possible values: raw, qcow2

  openstack:
    --volume:

  ovirt:
    --volume:
      size_gb             Volume size in GB, integer value
      storage_domain      ID of storage domain
      bootable            Boolean, only one volume can be bootable

  rackspace:
    --volume:

  vmware:
    --volume:
      name
      storage_pod         Storage Pod ID from VMware
      datastore           Datastore ID from VMware
      size_gb             Integer number, volume size in GB
      thin                true/false
      eager_zero          true/false
      mode                persistent/independent_persistent/independent_nonpersistent

2.12.6.3. hammer compute-profile values create

コンピュートプロファイルの値セットを作成します。

Usage:
    hammer compute-profile values create [OPTIONS]

Options:
 --compute-attributes COMPUTE_ATTRS        Compute resource attributes
                                           Comma-separated list of key=value.
                                           JSON is acceptable and preferred way for complex parameters
 --compute-profile COMPUTE_PROFILE_NAME    Compute profile name
 --compute-profile-id COMPUTE_PROFILE_ID
 --compute-resource COMPUTE_RESOURCE_NAME  Compute resource name
 --compute-resource-id COMPUTE_RESOURCE_ID
 --interface INTERFACE                     Interface parameters, should be comma separated list of values
                                           Comma-separated list of key=value.
                                           JSON is acceptable and preferred way for complex parameters
                                           Can be specified multiple times.
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE           Location title
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-title ORGANIZATION_TITLE   Organization title
 --volume VOLUME                           Volume parameters, should be comma separated list of values
                                           Comma-separated list of key=value.
                                           JSON is acceptable and preferred way for complex parameters
                                           Can be specified multiple times.
 -h, --help                                Print help

Provider specific options:
  ec2:
    --volume:


    --interface:


    --compute-attributes:
      flavor_id
      image_id
      availability_zone
      security_group_ids
      managed_ip

  gce:
    --volume:


    --interface:


    --compute-attributes:
      machine_type
      image_id
      network
      external_ip

  libvirt:
    --volume:
      pool_name           One of available storage pools
      capacity            String value, eg. 10G
      format_type         Possible values: raw, qcow2

    --interface:
      compute_type        Possible values: bridge, network
      compute_bridge      Name of interface according to type
      compute_model       Possible values: virtio, rtl8139, ne2k_pci, pcnet, e1000

    --compute-attributes:
      cpus                Number of CPUs
      memory              String, amount of memory, value in bytes
      start               Boolean (expressed as 0 or 1), whether to start the machine or not

  openstack:
    --volume:


    --interface:


    --compute-attributes:
      flavor_ref
      image_ref
      tenant_id
      security_groups
      network

  ovirt:
    --volume:
      size_gb             Volume size in GB, integer value
      storage_domain      ID of storage domain
      bootable            Boolean, only one volume can be bootable

    --interface:
      compute_name        Compute name, e.g. eth0
      compute_network     Select one of available networks for a cluster, must be an ID
      compute_interface   Interface type

    --compute-attributes:
      cluster             ID of cluster to use
      template            Hardware profile to use
      cores               Integer value, number of cores
      memory              Amount of memory, integer value in bytes

  rackspace:
    --volume:


    --interface:


    --compute-attributes:
      flavor_id
      image_id

  vmware:
    --volume:
      name
      storage_pod         Storage Pod ID from VMware
      datastore           Datastore ID from VMware
      size_gb             Integer number, volume size in GB
      thin                true/false
      eager_zero          true/false
      mode                persistent/independent_persistent/independent_nonpersistent

    --interface:
      compute_type        Type of the network adapter, for example one of:
                            VirtualVmxnet3,
                            VirtualE1000
                          See documentation center for your version of vSphere to find more details about available adapter types:
                            https://www.vmware.com/support/pubs/
      compute_network     Network ID from VMware

    --compute-attributes:
      cpus                  CPU count
      corespersocket        Number of cores per socket (applicable to hardware versions < 10 only)
      memory_mb             Integer number, amount of memory in MB
      firmware              automatic/bios/efi
      cluster               Cluster ID from VMware
      resource_pool         Resource Pool ID from VMware
      path                  Path to folder
      guest_id              Guest OS ID form VMware
      scsi_controller_type  ID of the controller from VMware
      hardware_version      Hardware version ID from VMware
      add_cdrom             Must be a 1 or 0, Add a CD-ROM drive to the virtual machine
      cpuHotAddEnabled      Must be a 1 or 0, lets you add memory resources while the machine is on
      memoryHotAddEnabled   Must be a 1 or 0, lets you add CPU resources while the machine is on
      annotation            Annotation Notes

2.12.6.4. hammer compute-profile values remove-interface

コンピュートプロファイルのインターフェースを削除します。

Usage:
    hammer compute-profile values remove-interface [OPTIONS]

Options:
 --compute-profile COMPUTE_PROFILE_NAME    Compute profile name
 --compute-profile-id COMPUTE_PROFILE_ID
 --compute-resource COMPUTE_RESOURCE_NAME  Compute resource name
 --compute-resource-id COMPUTE_RESOURCE_ID
 --interface-id INTERFACE ID               Interface id
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE           Location title
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-title ORGANIZATION_TITLE   Organization title
 -h, --help                                Print help

2.12.6.5. hammer compute-profile values remove-volume

コンピュートプロファイルのボリュームを削除します。

Usage:
    hammer compute-profile values remove-volume [OPTIONS]

Options:
 --compute-profile COMPUTE_PROFILE_NAME    Compute profile name
 --compute-profile-id COMPUTE_PROFILE_ID
 --compute-resource COMPUTE_RESOURCE_NAME  Compute resource name
 --compute-resource-id COMPUTE_RESOURCE_ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE           Location title
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-title ORGANIZATION_TITLE   Organization title
 --volume-id VOLUME_ID                     Volume id
 -h, --help                                Print help

2.12.6.6. hammer compute-profile values update

コンピュートプロファイルの値を更新します。

Usage:
    hammer compute-profile values update [OPTIONS]

Options:
 --compute-attributes COMPUTE_ATTRS        Compute resource attributes, should be comma separated list of values
                                           Comma-separated list of key=value.
                                           JSON is acceptable and preferred way for complex parameters
 --compute-profile COMPUTE_PROFILE_NAME    Compute profile name
 --compute-profile-id COMPUTE_PROFILE_ID
 --compute-resource COMPUTE_RESOURCE_NAME  Compute resource name
 --compute-resource-id COMPUTE_RESOURCE_ID
 --interface INTERFACE                     Interface parameters, should be comma separated list of values
                                           Comma-separated list of key=value.
                                           JSON is acceptable and preferred way for complex parameters
                                           Can be specified multiple times.
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE           Location title
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-title ORGANIZATION_TITLE   Organization title
 --volume VOLUME                           Volume parameters, should be comma separated list of values
                                           Comma-separated list of key=value.
                                           JSON is acceptable and preferred way for complex parameters
                                           Can be specified multiple times.
 -h, --help                                Print help

Provider specific options:
  ec2:
    --volume:


    --interface:


    --compute-attributes:
      flavor_id
      image_id
      availability_zone
      security_group_ids
      managed_ip

  gce:
    --volume:


    --interface:


    --compute-attributes:
      machine_type
      image_id
      network
      external_ip

  libvirt:
    --volume:
      pool_name           One of available storage pools
      capacity            String value, eg. 10G
      format_type         Possible values: raw, qcow2

    --interface:
      compute_type        Possible values: bridge, network
      compute_bridge      Name of interface according to type
      compute_model       Possible values: virtio, rtl8139, ne2k_pci, pcnet, e1000

    --compute-attributes:
      cpus                Number of CPUs
      memory              String, amount of memory, value in bytes
      start               Boolean (expressed as 0 or 1), whether to start the machine or not

  openstack:
    --volume:


    --interface:


    --compute-attributes:
      flavor_ref
      image_ref
      tenant_id
      security_groups
      network

  ovirt:
    --volume:
      size_gb             Volume size in GB, integer value
      storage_domain      ID of storage domain
      bootable            Boolean, only one volume can be bootable

    --interface:
      compute_name        Compute name, e.g. eth0
      compute_network     Select one of available networks for a cluster, must be an ID
      compute_interface   Interface type

    --compute-attributes:
      cluster             ID of cluster to use
      template            Hardware profile to use
      cores               Integer value, number of cores
      memory              Amount of memory, integer value in bytes

  rackspace:
    --volume:


    --interface:


    --compute-attributes:
      flavor_id
      image_id

  vmware:
    --volume:
      name
      storage_pod         Storage Pod ID from VMware
      datastore           Datastore ID from VMware
      size_gb             Integer number, volume size in GB
      thin                true/false
      eager_zero          true/false
      mode                persistent/independent_persistent/independent_nonpersistent

    --interface:
      compute_type        Type of the network adapter, for example one of:
                            VirtualVmxnet3,
                            VirtualE1000
                          See documentation center for your version of vSphere to find more details about available adapter types:
                            https://www.vmware.com/support/pubs/
      compute_network     Network ID from VMware

    --compute-attributes:
      cpus                  CPU count
      corespersocket        Number of cores per socket (applicable to hardware versions < 10 only)
      memory_mb             Integer number, amount of memory in MB
      firmware              automatic/bios/efi
      cluster               Cluster ID from VMware
      resource_pool         Resource Pool ID from VMware
      path                  Path to folder
      guest_id              Guest OS ID form VMware
      scsi_controller_type  ID of the controller from VMware
      hardware_version      Hardware version ID from VMware
      add_cdrom             Must be a 1 or 0, Add a CD-ROM drive to the virtual machine
      cpuHotAddEnabled      Must be a 1 or 0, lets you add memory resources while the machine is on
      memoryHotAddEnabled   Must be a 1 or 0, lets you add CPU resources while the machine is on
      annotation            Annotation Notes

2.12.6.7. hammer compute-profile values update-interface

コンピュートプロファイルのインターフェースを更新します。

Usage:
    hammer compute-profile values update-interface [OPTIONS]

Options:
 --compute-profile COMPUTE_PROFILE_NAME    Compute profile name
 --compute-profile-id COMPUTE_PROFILE_ID
 --compute-resource COMPUTE_RESOURCE_NAME  Compute resource name
 --compute-resource-id COMPUTE_RESOURCE_ID
 --interface SET_VALUES                    Interface parameters, should be comma separated list of values
                                           Comma-separated list of key=value.
                                           JSON is acceptable and preferred way for complex parameters
 --interface-id INTERFACE_ID               Interface id
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE           Location title
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-title ORGANIZATION_TITLE   Organization title
 -h, --help                                Print help

Provider specific options:
  ec2:
    --interface:

  gce:
    --interface:

  libvirt:
    --interface:
      compute_type        Possible values: bridge, network
      compute_bridge      Name of interface according to type
      compute_model       Possible values: virtio, rtl8139, ne2k_pci, pcnet, e1000

  openstack:
    --interface:

  ovirt:
    --interface:
      compute_name        Compute name, e.g. eth0
      compute_network     Select one of available networks for a cluster, must be an ID
      compute_interface   Interface type

  rackspace:
    --interface:

  vmware:
    --interface:
      compute_type        Type of the network adapter, for example one of:
                            VirtualVmxnet3,
                            VirtualE1000
                          See documentation center for your version of vSphere to find more details about available adapter types:
                            https://www.vmware.com/support/pubs/
      compute_network     Network ID from VMware

2.12.6.8. hammer compute-profile values update-volume

コンピュートプロファイルのボリュームを更新します。

Usage:
    hammer compute-profile values update-volume [OPTIONS]

Options:
 --compute-profile COMPUTE_PROFILE_NAME    Compute profile name
 --compute-profile-id COMPUTE_PROFILE_ID
 --compute-resource COMPUTE_RESOURCE_NAME  Compute resource name
 --compute-resource-id COMPUTE_RESOURCE_ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE           Location title
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-title ORGANIZATION_TITLE   Organization title
 --volume VOLUME                           Volume parameters, should be comma separated list of values
                                           Comma-separated list of key=value.
                                           JSON is acceptable and preferred way for complex parameters
 --volume-id VOLUME_ID                     Volume id
 -h, --help                                Print help

Provider specific options:
  ec2:
    --volume:

  gce:
    --volume:

  libvirt:
    --volume:
      pool_name           One of available storage pools
      capacity            String value, eg. 10G
      format_type         Possible values: raw, qcow2

  openstack:
    --volume:

  ovirt:
    --volume:
      size_gb             Volume size in GB, integer value
      storage_domain      ID of storage domain
      bootable            Boolean, only one volume can be bootable

  rackspace:
    --volume:

  vmware:
    --volume:
      name
      storage_pod         Storage Pod ID from VMware
      datastore           Datastore ID from VMware
      size_gb             Integer number, volume size in GB
      thin                true/false
      eager_zero          true/false
      mode                persistent/independent_persistent/independent_nonpersistent

2.13. hammer compute-resource

コンピュートリソースを操作します。

Usage:
    hammer compute-resource [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 clusters                      List available clusters for a compute resource
 create                        Create a compute resource
 delete                        Delete a compute resource
 flavors                       List available flavors for a compute resource
 folders                       List available folders for a compute resource
 image                         View and manage compute resource's images
 images                        List available images for a compute resource
 info                          Show a compute resource
 list                          List all compute resources
 networks                      List available networks for a compute resource
 resource-pools                List resource pools for a compute resource cluster
 security-groups               List available security groups for a compute resource
 storage-domains               List storage domains for a compute resource
 storage-pods                  List storage pods for a compute resource
 update                        Update a compute resource
 zones                         List available zone for a compute resource

Options:
 -h, --help                    Print help

2.13.1. hammer compute-resource clusters

コンピューティングリソースで利用可能なクラスターを一覧表示します。

Usage:
    hammer compute-resource clusters [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Compute resource name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.13.2. hammer compute-resource create

コンピュートリソースを作成します。

Usage:
    hammer compute-resource create [OPTIONS]

Options:
 --caching-enabled CACHING_ENABLED           Enable caching, for VMware only
                                             One of true/false, yes/no, 1/0.
 --datacenter DATACENTER                     For RHEV, VMware Datacenter
 --description DESCRIPTION
 --display-type DISPLAY_TYPE                 For Libvirt only
                                             Possible value(s): 'VNC', 'SPICE'
 --domain DOMAIN                             For RHEL OpenStack Platform (v3) only
 --location LOCATION_NAME                    Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS                 REPLACE locations with given ids
                                             Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                             JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE             Location title
 --location-titles LOCATION_TITLES           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                             JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                  Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                             JSON is acceptable and preferred way for complex parameters
 --name NAME
 --organization ORGANIZATION_NAME            Organization name
 --organization-id ORGANIZATION_ID           Organization ID
 --organization-ids ORGANIZATION_IDS         REPLACE organizations with given ids.
                                             Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                             JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE     Organization title
 --organization-titles ORGANIZATION_TITLES   Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                             JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES          Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                             JSON is acceptable and preferred way for complex parameters
 --ovirt-quota OVIRT_QUOTA                   For RHEV only, ID of quota to use
 --password PASSWORD                         Password for RHEV, EC2, VMware, RHEL OpenStack Platform. Secret key for EC2
 --project-domain-id PROJECT_DOMAIN_ID       For RHEL OpenStack Platform (v3) only
 --project-domain-name PROJECT_DOMAIN_NAME   For RHEL OpenStack Platform (v3) only
 --provider PROVIDER                         Providers include Libvirt, Ovirt, EC2, Vmware, Openstack, Rackspace, GCE
 --public-key PUBLIC_KEY                     For RHEV only
 --public-key-path PUBLIC_KEY_PATH           Path to a file that contains oVirt public key (For oVirt only)
 --region REGION                             For EC2 only, use 'us-gov-west-1' for GovCloud region
 --server SERVER                             For VMware
 --set-console-password SET_CONSOLE_PASSWORD For Libvirt and VMware only
                                             One of true/false, yes/no, 1/0.
 --tenant TENANT                             For RHEL OpenStack Platform only
 --url URL                                   URL for Libvirt, RHEV, RHEL OpenStack Platform and Rackspace
 --use-v4 USE_V4                             For RHEV only
                                             One of true/false, yes/no, 1/0.
 --user USER                                 Username for RHEV, EC2, VMware, RHEL OpenStack Platform. Access Key for
                                             EC2.
 --uuid UUID                                 Deprecated, please use datacenter
 -h, --help                                  Print help

2.13.3. hammer compute-resource delete

コンピュートリソースを削除します。

Usage:
    hammer compute-resource delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Compute resource name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.13.4. hammer compute-resource flavors

コンピューティングリソースで利用可能なフレーバーを一覧表示します。

Usage:
    hammer compute-resource flavors [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Compute resource name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.13.5. hammer compute-resource folders

コンピューティングリソースで利用可能なフォルダーを一覧表示します。

Usage:
    hammer compute-resource folders [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Compute resource name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.13.6. hammer compute-resource image

コンピュートリソースのイメージを表示および管理します。

Usage:
    hammer compute-resource image [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 available                     Show images available for addition
 create                        Create an image
 delete                        Delete an image
 info                          Show an image
 list                          List all images for a compute resource
 update                        Update an image

Options:
 -h, --help                    Print help

2.13.6.1. hammer compute-resource image available

追加できるイメージを表示します。

Usage:
    hammer compute-resource image available [OPTIONS]

Options:
 --compute-resource NAME                 Compute resource name
 --compute-resource-id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.13.6.2. hammer compute-resource image create

イメージを作成します。

Usage:
    hammer compute-resource image create [OPTIONS]

Options:
 --architecture ARCHITECTURE_NAME          Architecture name
 --architecture-id ARCHITECTURE_ID
 --compute-resource COMPUTE_RESOURCE_NAME  Compute resource name
 --compute-resource-id COMPUTE_RESOURCE_ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE           Location title
 --name NAME
 --operatingsystem OPERATINGSYSTEM_TITLE   Operating system title
 --operatingsystem-id OPERATINGSYSTEM_ID
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-title ORGANIZATION_TITLE   Organization title
 --password PASSWORD
 --user-data USER_DATA                     Whether or not the image supports user data
                                           One of true/false, yes/no, 1/0.
 --username USERNAME
 --uuid UUID                               Template ID in the compute resource
 -h, --help                                Print help

2.13.6.3. hammer compute-resource image delete

イメージを削除します。

Usage:
    hammer compute-resource image delete [OPTIONS]

Options:
 --compute-resource COMPUTE_RESOURCE_NAME  Compute resource name
 --compute-resource-id COMPUTE_RESOURCE_ID
 --id ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE           Location title
 --name NAME                               Name to search by
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-title ORGANIZATION_TITLE   Organization title
 -h, --help                                Print help

2.13.6.4. hammer compute-resource image info

イメージを表示します。

Usage:
    hammer compute-resource image info [OPTIONS]

Options:
 --architecture ARCHITECTURE_NAME          Architecture name
 --architecture-id ARCHITECTURE_ID
 --compute-resource COMPUTE_RESOURCE_NAME  Compute resource name
 --compute-resource-id COMPUTE_RESOURCE_ID
 --id ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE           Location title
 --name NAME                               Name to search by
 --operatingsystem OPERATINGSYSTEM_TITLE   Operating system title
 --operatingsystem-id OPERATINGSYSTEM_ID
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-title ORGANIZATION_TITLE   Organization title
 -h, --help                                Print help

2.13.6.5. hammer compute-resource image list

コンピュートリソースのイメージを一覧表示します。

Usage:
    hammer compute-resource image list [OPTIONS]

Options:
 --architecture ARCHITECTURE_NAME          Architecture name
 --architecture-id ARCHITECTURE_ID
 --compute-resource COMPUTE_RESOURCE_NAME  Compute resource name
 --compute-resource-id COMPUTE_RESOURCE_ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE           Location title
 --operatingsystem OPERATINGSYSTEM_TITLE   Operating system title
 --operatingsystem-id OPERATINGSYSTEM_ID
 --order ORDER                             Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-title ORGANIZATION_TITLE   Organization title
 --page PAGE                               Paginate results
 --per-page PER_PAGE                       Number of entries per request
 --search SEARCH                           Filter results
 -h, --help                                Print help

Search / Order fields:
  architecture        integer
  compute_resource    string
  name                string
  operatingsystem     integer
  user_data           Values: true, false
  username            string

2.13.6.6. hammer compute-resource image update

イメージを更新します。

Usage:
    hammer compute-resource image update [OPTIONS]

Options:
 --architecture ARCHITECTURE_NAME          Architecture name
 --architecture-id ARCHITECTURE_ID
 --compute-resource COMPUTE_RESOURCE_NAME  Compute resource name
 --compute-resource-id COMPUTE_RESOURCE_ID
 --id ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE           Location title
 --name NAME                               Name to search by
 --new-name NEW_NAME
 --operatingsystem OPERATINGSYSTEM_TITLE   Operating system title
 --operatingsystem-id OPERATINGSYSTEM_ID
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-title ORGANIZATION_TITLE   Organization title
 --password PASSWORD
 --user-data USER_DATA                     Whether or not the image supports user data
                                           One of true/false, yes/no, 1/0.
 --username USERNAME
 --uuid UUID                               Template ID in the compute resource
 -h, --help                                Print help

2.13.7. hammer compute-resource images

コンピューティングリソースで利用可能なイメージを表示します。

Usage:
    hammer compute-resource images [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Compute resource name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.13.8. hammer compute-resource info

コンピュートリソースを表示します。

Usage:
    hammer compute-resource info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Compute resource name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.13.9. hammer compute-resource list

コンピュートリソースの一覧を表示します。

Usage:
    hammer compute-resource list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  id                  integer
  location            string
  location_id         integer
  name                string
  organization        string
  organization_id     integer
  type                string

2.13.10. hammer compute-resource networks

コンピューティングリソースで利用可能なネットワークを一覧表示します。

Usage:
    hammer compute-resource networks [OPTIONS]

Options:
 --cluster-id CLUSTER_ID
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Compute resource name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.13.11. hammer compute-resource resource-pools

コンピュートリソースクラスターのリソースプールを一覧表示します。

Usage:
    hammer compute-resource resource-pools [OPTIONS]

Options:
 --cluster-id CLUSTER_ID
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Compute resource name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.13.12. hammer compute-resource security-groups

コンピューティングリソースで利用可能なセキュリティーグループを一覧表示します。

Usage:
    hammer compute-resource security-groups [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Compute resource name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.13.13. hammer compute-resource storage-domains

コンピューティングリソースのストレージドメインを一覧表示します。

Usage:
    hammer compute-resource storage-domains [OPTIONS]

Options:
 --cluster-id CLUSTER_ID
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Compute resource name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --storage-domain STORAGE_DOMAIN
 -h, --help                              Print help

2.13.14. hammer compute-resource storage-pods

コンピューティングリソースのストレージ Pod を一覧表示します。

Usage:
    hammer compute-resource storage-pods [OPTIONS]

Options:
 --cluster-id CLUSTER_ID
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Compute resource name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --storage-pod STORAGE_POD
 -h, --help                              Print help

2.13.15. hammer compute-resource update

コンピュートリソースを更新します。

Usage:
    hammer compute-resource update [OPTIONS]

Options:
 --caching-enabled CACHING_ENABLED           Enable caching, for VMware only
                                             One of true/false, yes/no, 1/0.
 --datacenter DATACENTER                     For RHEV, VMware Datacenter
 --description DESCRIPTION
 --display-type DISPLAY_TYPE                 For Libvirt only
                                             Possible value(s): 'VNC', 'SPICE'
 --domain DOMAIN                             For RHEL OpenStack Platform (v3) only
 --id ID
 --location LOCATION_NAME                    Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS                 REPLACE locations with given ids
                                             Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                             JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE             Location title
 --location-titles LOCATION_TITLES           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                             JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                  Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                             JSON is acceptable and preferred way for complex parameters
 --name NAME                                 Compute resource name
 --new-name NEW_NAME
 --organization ORGANIZATION_NAME            Organization name
 --organization-id ORGANIZATION_ID           Organization ID
 --organization-ids ORGANIZATION_IDS         REPLACE organizations with given ids.
                                             Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                             JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE     Organization title
 --organization-titles ORGANIZATION_TITLES   Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                             JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES          Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                             JSON is acceptable and preferred way for complex parameters
 --ovirt-quota OVIRT_QUOTA                   For RHEV only, ID of quota to use
 --password PASSWORD                         Password for RHEV, EC2, VMware, RHEL OpenStack Platform. Secret key for EC2
 --project-domain-id PROJECT_DOMAIN_ID       For RHEL OpenStack Platform (v3) only
 --project-domain-name PROJECT_DOMAIN_NAME   For RHEL OpenStack Platform (v3) only
 --provider PROVIDER                         Providers include Libvirt, Ovirt, EC2, Vmware, Openstack, Rackspace, GCE
 --public-key PUBLIC_KEY                     For RHEV only
 --public-key-path PUBLIC_KEY_PATH           Path to a file that contains oVirt public key (For oVirt only)
 --region REGION                             For EC2 only, use 'us-gov-west-1' for GovCloud region
 --server SERVER                             For VMware
 --set-console-password SET_CONSOLE_PASSWORD For Libvirt and VMware only
                                             One of true/false, yes/no, 1/0.
 --tenant TENANT                             For RHEL OpenStack Platform only
 --url URL                                   URL for Libvirt, RHEV, RHEL OpenStack Platform and Rackspace
 --use-v4 USE_V4                             For RHEV only
                                             One of true/false, yes/no, 1/0.
 --user USER                                 Username for RHEV, EC2, VMware, RHEL OpenStack Platform. Access Key for
                                             EC2.
 --uuid UUID                                 Deprecated, please use datacenter
 -h, --help                                  Print help

2.13.16. hammer compute-resource zones

コンピューティングリソースで利用可能なゾーンを表示します。

Usage:
    hammer compute-resource zones [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Compute resource name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.14. hammer config-group

設定グループを操作します。

Usage:
    hammer config-group [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 create                        Create a config group
 delete                        Delete a config group
 info                          Show a config group
 list                          List of config groups
 update                        Update a config group

Options:
 -h, --help                    Print help

2.14.1. hammer config-group create

設定グループを作成します。

Usage:
    hammer config-group create [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --puppet-class-ids PUPPET_CLASS_IDS     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --puppet-classes PUPPET_CLASS_NAMES     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 -h, --help                              Print help

2.14.2. hammer config-group delete

設定グループを削除します。

Usage:
    hammer config-group delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.14.3. hammer config-group info

設定グループを表示します。

Usage:
    hammer config-group info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.14.4. hammer config-group list

設定グループの一覧を表示します。

Usage:
    hammer config-group list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  class               string
  name                string

2.14.5. hammer config-group update

設定グループを更新します。

Usage:
    hammer config-group update [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --new-name NEW_NAME
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --puppet-class-ids PUPPET_CLASS_IDS     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --puppet-classes PUPPET_CLASS_NAMES     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 -h, --help                              Print help

2.15. hammer config-report

レポートを参照および読み込みます。

Usage:
    hammer config-report [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 delete                        Delete a report
 info                          Show a report
 list                          List all reports

Options:
 -h, --help                    Print help

2.15.1. hammer config-report delete

レポートを削除します。

Usage:
    hammer config-report delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.15.2. hammer config-report info

レポートを表示します。

Usage:
    hammer config-report info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.15.3. hammer config-report list

レポートの一覧を表示します。

Usage:
    hammer config-report list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  applied             integer
  environment         string
  eventful            Values: true, false
  failed              integer
  failed_restarts     integer
  host                string
  host_id             integer
  hostgroup           string
  hostgroup_fullname  string
  hostgroup_title     string
  last_report         datetime
  location            string
  log                 text
  organization        string
  origin              string
  pending             integer
  reported            datetime
  resource            text
  restarted           integer
  skipped             integer

2.16. hammer content-view

コンテンツビューを操作します。

Usage:
    hammer content-view [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 add-repository                Associate a resource
 add-version                   Add a content view version to a composite view
 component                     View and manage components
 copy                          Copy a content view
 create                        Create a content view
 delete                        Delete a content view
 filter                        View and manage filters
 info                          Show a content view
 list                          List content views
 publish                       Publish a content view
 puppet-module                 View and manage puppet modules
 purge                         Delete old versions of a content view
 remove                        Remove versions and/or environments from a content view and reassign systems and keys
 remove-from-environment       Remove a content view from an environment
 remove-repository             Disassociate a resource
 remove-version                Remove a content view version from a composite view
 update                        Update a content view
 version                       View and manage content view versions

Options:
 -h, --help                    Print help

2.16.1. hammer content-view add-repository

リソースを関連付けます。

Usage:
    hammer content-view add-repository [OPTIONS]

Options:
 --id ID                                 Content view numeric identifier
 --name NAME                             Content view name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID to search by
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --product PRODUCT_NAME                  Product name to search by
 --product-id PRODUCT_ID                 Product numeric identifier
 --repository REPOSITORY_NAME            Repository name to search by
 --repository-id REPOSITORY_ID           Repository ID
 -h, --help                              Print help

2.16.2. hammer content-view add-version

コンテンツビューバージョンを複合ビューに追加します。

Usage:
    hammer content-view add-version [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME                    Content view name to search by
 --content-view-id CONTENT_VIEW_ID                   Content view numeric identifier
 --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number
 --content-view-version-id CONTENT_VIEW_VERSION_ID   Content view version identifier
 --id ID                                             Content view numeric identifier
 --name NAME                                         Content view name to search by
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID to search by
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 -h, --help                                          Print help

2.16.3. hammer content-view component

コンポーネントを表示および管理します。

Usage:
    hammer content-view component [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 add                           Add components to the content view
 list                          List components attached to this content view
 remove                        Remove components from the content view
 update                        Update a component associated with the content view

Options:
 -h, --help                    Print help

2.16.3.1. hammer content-view component add

コンポーネントをコンテンツビューに追加します。

Usage:
    hammer content-view component add [OPTIONS]

Options:
 --component-content-view COMPONENT_CONTENT_VIEW_NAME                    Content View name of the component who's latest version is desired
 --component-content-view-id COMPONENT_CONTENT_VIEW_ID                   Content View identifier of the component who's latest version is desired
 --component-content-view-version COMPONENT_CONTENT_VIEW_VERSION_VERSION Content View Version number of the component. Either use this or --component-content-view-version-id option
 --component-content-view-version-id COMPONENT_CONTENT_VIEW_VERSION_ID   Content View Version identifier of the component
 --composite-content-view COMPOSITE_CONTENT_VIEW_NAME                    Name of the composite content view
 --composite-content-view-id COMPOSITE_CONTENT_VIEW_ID                   Composite content view identifier
 --latest                                                                Select the latest version of the components content view is desired
 --organization ORGANIZATION_NAME                                        Organization name to search by
 --organization-id ORGANIZATION_ID                                       Organization ID to search by
 --organization-label ORGANIZATION_LABEL                                 Organization label to search by
 -h, --help                                                              Print help

2.16.3.2. hammer content-view component list

このコンテンツビューに割り当てられたコンポーネントの一覧を表示します。

Usage:
    hammer content-view component list [OPTIONS]

Options:
 --composite-content-view COMPOSITE_CONTENT_VIEW_NAME  Name of the composite content view
 --composite-content-view-id COMPOSITE_CONTENT_VIEW_ID Composite content view identifier
 --organization ORGANIZATION_NAME                      Organization name to search by
 --organization-id ORGANIZATION_ID                     Organization ID to search by
 --organization-label ORGANIZATION_LABEL               Organization label to search by
 -h, --help                                            Print help

2.16.3.3. hammer content-view component remove

コンテンツビューからコンポーネントを削除します。

Usage:
    hammer content-view component remove [OPTIONS]

Options:
 --component-content-view-ids COMPONENT_CONTENT_VIEW_IDs Array of component content view identfiers to remove. Comma separated list of values
 --component-content-views COMPONENT_CONTENT_VIEW_NAMES  Array of component content view names to remove. Comma separated list of values
 --component-ids COMPONENT_IDS                           Array of content view component IDs to remove. Identifier of the component
                                                         Association
                                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                         JSON is acceptable and preferred way for complex parameters
 --composite-content-view COMPOSITE_CONTENT_VIEW_NAME    Name of the composite content view
 --composite-content-view-id COMPOSITE_CONTENT_VIEW_ID   Composite content view identifier
 --organization ORGANIZATION_NAME                        Organization name to search by
 --organization-id ORGANIZATION_ID                       Organization ID to search by
 --organization-label ORGANIZATION_LABEL                 Organization label to search by
 -h, --help                                              Print help

2.16.3.4. hammer content-view component update

コンテンツビューに関連付けられたコンポーネントを更新します。

Usage:
    hammer content-view component update [OPTIONS]

Options:
 --component-content-view COMPONENT_CONTENT_VIEW_NAME                    Content View name of the component who's latest version is desired
 --component-content-view-id COMPONENT_CONTENT_VIEW_ID                   Content View identifier of the component who's latest version is desired
 --component-content-view-version COMPONENT_CONTENT_VIEW_VERSION_VERSION Content View Version number of the component. Either use this or --component-content-view-version-id option
 --component-content-view-version-id COMPONENT_CONTENT_VIEW_VERSION_ID   Content View Version identifier of the component
 --composite-content-view COMPOSITE_CONTENT_VIEW_NAME                    Name of the composite content view
 --composite-content-view-id COMPOSITE_CONTENT_VIEW_ID                   Composite content view identifier
 --id ID                                                                 Content view component ID. Identifier of the component association
 --latest                                                                Select the latest version of the components content view is desired
 --organization ORGANIZATION_NAME                                        Organization name to search by
 --organization-id ORGANIZATION_ID                                       Organization ID to search by
 --organization-label ORGANIZATION_LABEL                                 Organization label to search by
 -h, --help                                                              Print help

2.16.4. hammer content-view copy

コンテンツビューをコピーします。

Usage:
    hammer content-view copy [OPTIONS]

Options:
 --id ID                                 Content view numeric identifier
 --name NAME                             Content view name to search by
 --new-name NEW_NAME                     New content view name
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID to search by
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.16.5. hammer content-view create

コンテンツビューを作成します。

Usage:
    hammer content-view create [OPTIONS]

Options:
 --auto-publish AUTO_PUBLISH             Enable/Disable auto publish of composite view
                                         One of true/false, yes/no, 1/0.
 --component-ids COMPONENT_IDS           List of component content view version ids for composite views
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --composite                             Create a composite content view
 --description DESCRIPTION               Description for the content view
 --label LABEL                           Content view label
 --name NAME                             Name of the content view
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --repository-ids REPOSITORY_IDS         List of repository ids
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --solve-dependencies SOLVE_DEPENDENCIES Solve RPM dependencies by default on Content View publish, defaults to
                                         False
                                         One of true/false, yes/no, 1/0.
 -h, --help                              Print help

2.16.6. hammer content-view delete

コンテンツビューを削除します。

Usage:
    hammer content-view delete [OPTIONS]

Options:
 --async                                 Do not wait for the task
 --id ID                                 Content view numeric identifier
 --name NAME                             Content view name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID to search by
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.16.7. hammer content-view filter

フィルターを表示および管理します。

Usage:
    hammer content-view filter [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 add-repository                Associate a resource
 create                        Create a filter for a content view
 delete                        Delete a filter
 info                          Show filter info
 list                          List filters
 remove-repository             Disassociate a resource
 rule                          View and manage filter rules
 update                        Update a filter

Options:
 -h, --help                    Print help

2.16.7.1. hammer content-view filter add-repository

リソースを関連付けます。

Usage:
    hammer content-view filter add-repository [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME        Content view name to search by
 --content-view-id CONTENT_VIEW_ID       Content view numeric identifier
 --id ID                                 Filter identifier
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID to search by
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --product PRODUCT_NAME                  Product name to search by
 --product-id PRODUCT_ID                 Product numeric identifier
 --repository REPOSITORY_NAME            Repository name to search by
 --repository-id REPOSITORY_ID           Repository ID
 -h, --help                              Print help

2.16.7.2. hammer content-view filter create

コンテンツビューのフィルターを作成します。

Usage:
    hammer content-view filter create [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME        Content view name to search by
 --content-view-id CONTENT_VIEW_ID       Content view numeric identifier
 --description DESCRIPTION               Description of the filter
 --inclusion INCLUSION                   Specifies if content should be included or excluded, default:
                                         Inclusion=false
                                         One of true/false, yes/no, 1/0.
 --name NAME                             Name of the filter
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID to search by
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --original-packages ORIGINAL_PACKAGES   Add all packages without errata to the included/excluded list. (package
                                         Filter only)
                                         One of true/false, yes/no, 1/0.
 --product PRODUCT_NAME                  Product name to search by
 --product-id PRODUCT_ID                 Product numeric identifier
 --repositories REPOSITORY_NAMES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --repository-ids REPOSITORY_IDS         List of repository ids
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --type TYPE                             Type of filter (e.g. rpm, package_group, erratum, docker)
 -h, --help                              Print help

2.16.7.3. hammer content-view filter delete

フィルターを削除します。

Usage:
    hammer content-view filter delete [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME        Content view name to search by
 --content-view-id CONTENT_VIEW_ID       Content view numeric identifier
 --id ID                                 Filter identifier
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID to search by
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.16.7.4. hammer content-view filter info

フィルター情報を表示します。

Usage:
    hammer content-view filter info [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME        Content view name to search by
 --content-view-id CONTENT_VIEW_ID       Content view numeric identifier
 --id ID                                 Filter identifier
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID to search by
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.16.7.5. hammer content-view filter list

フィルターの一覧を表示します。

Usage:
    hammer content-view filter list [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME        Content view name to search by
 --content-view-id CONTENT_VIEW_ID       Content view numeric identifier
 --full-result FULL_RESULT               Whether or not to show all results
                                         One of true/false, yes/no, 1/0.
 --name NAME                             Filter content view filters by name
 --order ORDER                           Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID to search by
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --page PAGE                             Page number, starting at 1
 --per-page PER_PAGE                     Number of results per page to return
 --search SEARCH                         Search string
 --types TYPES                           Types of filters
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 -h, --help                              Print help

2.16.7.6. hammer content-view filter remove-repository

リソースの関連付けを解除します。

Usage:
    hammer content-view filter remove-repository [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME        Content view name to search by
 --content-view-id CONTENT_VIEW_ID       Content view numeric identifier
 --id ID                                 Filter identifier
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID to search by
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --product PRODUCT_NAME                  Product name to search by
 --product-id PRODUCT_ID                 Product numeric identifier
 --repository REPOSITORY_NAME            Repository name to search by
 --repository-id REPOSITORY_ID           Repository ID
 -h, --help                              Print help

2.16.7.7. hammer content-view filter rule

フィルタールールを表示および管理します。

Usage:
    hammer content-view filter rule [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 create                        Create a filter rule. The parameters included should be based upon the filter type.
 delete                        Delete a filter rule
 info                          Show filter rule info
 list                          List filter rules
 update                        Update a filter rule. The parameters included should be based upon the filter type.

Options:
 -h, --help                    Print help
2.16.7.7.1. hammer content-view filter rule create

フィルタールールを作成します。組み込まれるパラメーターはフィルタータイプに基づいている必要があります。

Usage:
    hammer content-view filter rule create [OPTIONS]

Options:
 --architecture ARCHITECTURE                     Package: architecture
 --content-view CONTENT_VIEW_NAME                Content view name to search by
 --content-view-filter CONTENT_VIEW_FILTER_NAME  Name to search by
 --content-view-filter-id CONTENT_VIEW_FILTER_ID Filter identifier
 --content-view-id CONTENT_VIEW_ID               Content view numeric identifier
 --date-type DATE_TYPE                           Erratum: search using the 'Issued On' or 'Updated On'
                                                 Column of the errata. Values are 'issued'/'updated'
 --end-date END_DATE                             Erratum: end date (YYYY-MM-DD)
 --errata-id ERRATA_ID                           Erratum: id
 --errata-ids ERRATA_IDS                         Erratum: IDs or a select all object
                                                 Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                 JSON is acceptable and preferred way for complex parameters
 --max-version MAX_VERSION                       Package: maximum version
 --min-version MIN_VERSION                       Package: minimum version
 --name NAME                                     Package, package group, or docker tag names
                                                 Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                 JSON is acceptable and preferred way for complex parameters
 --names NAMES                                   Package and package group names
 --organization ORGANIZATION_NAME                Organization name to search by
 --organization-id ORGANIZATION_ID               Organization ID to search by
 --organization-label ORGANIZATION_LABEL         Organization label to search by
 --start-date START_DATE                         Erratum: start date (YYYY-MM-DD)
 --types TYPES                                   Erratum: types (enhancement, bugfix, security)
                                                 Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                 JSON is acceptable and preferred way for complex parameters
 --uuid UUID                                     Package group: uuid
 --version VERSION                               Package: version
 -h, --help                                      Print help
2.16.7.7.2. hammer content-view filter rule delete

フィルタールールを削除します。

Usage:
    hammer content-view filter rule delete [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME                Content view name to search by
 --content-view-filter CONTENT_VIEW_FILTER_NAME  Name to search by
 --content-view-filter-id CONTENT_VIEW_FILTER_ID Filter identifier
 --content-view-id CONTENT_VIEW_ID               Content view numeric identifier
 --id ID                                         Rule identifier
 --name NAME                                     Name to search by
 --organization ORGANIZATION_NAME                Organization name to search by
 --organization-id ORGANIZATION_ID               Organization ID to search by
 --organization-label ORGANIZATION_LABEL         Organization label to search by
 -h, --help                                      Print help
2.16.7.7.3. hammer content-view filter rule info

フィルタールール情報を表示します。

Usage:
    hammer content-view filter rule info [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME                Content view name to search by
 --content-view-filter CONTENT_VIEW_FILTER_NAME  Name to search by
 --content-view-filter-id CONTENT_VIEW_FILTER_ID Filter identifier
 --content-view-id CONTENT_VIEW_ID               Content view numeric identifier
 --id ID                                         Rule identifier
 --name NAME                                     Name to search by
 --organization ORGANIZATION_NAME                Organization name to search by
 --organization-id ORGANIZATION_ID               Organization ID to search by
 --organization-label ORGANIZATION_LABEL         Organization label to search by
 -h, --help                                      Print help
2.16.7.7.4. hammer content-view filter rule list

フィルタールールを一覧表示します。

Usage:
    hammer content-view filter rule list [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME                Content view name to search by
 --content-view-filter CONTENT_VIEW_FILTER_NAME  Name to search by
 --content-view-filter-id CONTENT_VIEW_FILTER_ID Filter identifier
 --content-view-id CONTENT_VIEW_ID               Content view numeric identifier
 --errata-id ERRATA_ID                           Errata_id of the content view filter rule
 --full-result FULL_RESULT                       Whether or not to show all results
                                                 One of true/false, yes/no, 1/0.
 --name NAME                                     Name of the content view filter rule
 --order ORDER                                   Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME                Organization name to search by
 --organization-id ORGANIZATION_ID               Organization ID to search by
 --organization-label ORGANIZATION_LABEL         Organization label to search by
 --page PAGE                                     Page number, starting at 1
 --per-page PER_PAGE                             Number of results per page to return
 --search SEARCH                                 Search string
 -h, --help                                      Print help
2.16.7.7.5. hammer content-view filter rule update

フィルタールールを更新します。組み込まれるパラメーターはフィルタータイプに基づくものでなければなりません。

Usage:
    hammer content-view filter rule update [OPTIONS]

Options:
 --architecture ARCHITECTURE                     Package: architecture
 --content-view CONTENT_VIEW_NAME                Content view name to search by
 --content-view-filter CONTENT_VIEW_FILTER_NAME  Name to search by
 --content-view-filter-id CONTENT_VIEW_FILTER_ID Filter identifier
 --content-view-id CONTENT_VIEW_ID               Content view numeric identifier
 --end-date END_DATE                             Erratum: end date (YYYY-MM-DD)
 --errata-id ERRATA_ID                           Erratum: id
 --id ID                                         Rule identifier
 --max-version MAX_VERSION                       Package: maximum version
 --min-version MIN_VERSION                       Package: minimum version
 --name NAME                                     Name to search by
 --new-name NEW_NAME                             Package, package group, or docker tag: name
 --organization ORGANIZATION_NAME                Organization name to search by
 --organization-id ORGANIZATION_ID               Organization ID to search by
 --organization-label ORGANIZATION_LABEL         Organization label to search by
 --start-date START_DATE                         Erratum: start date (YYYY-MM-DD)
 --types TYPES                                   Erratum: types (enhancement, bugfix, security)
                                                 Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                 JSON is acceptable and preferred way for complex parameters
 --version VERSION                               Package: version
 -h, --help                                      Print help

2.16.7.8. hammer content-view filter update

フィルターを更新します。

Usage:
    hammer content-view filter update [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME        Content view name to search by
 --content-view-id CONTENT_VIEW_ID       Content view numeric identifier
 --id ID                                 Filter identifier
 --inclusion INCLUSION                   Specifies if content should be included or excluded, default:
                                         Inclusion=false
                                         One of true/false, yes/no, 1/0.
 --name NAME                             Name to search by
 --new-name NEW_NAME                     New name for the filter
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID to search by
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --original-packages ORIGINAL_PACKAGES   Add all packages without errata to the included/excluded list. (package
                                         Filter only)
                                         One of true/false, yes/no, 1/0.
 --repositories REPOSITORY_NAMES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --repository-ids REPOSITORY_IDS         List of repository ids
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 -h, --help                              Print help

2.16.8. hammer content-view info

コンテンツビューを表示します。

Usage:
    hammer content-view info [OPTIONS]

Options:
 --id ID                                 Content view numeric identifier
 --name NAME                             Content view name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID to search by
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.16.9. hammer content-view list

コンテンツビューの一覧を表示します。

Usage:
    hammer content-view list [OPTIONS]

Options:
 --composite COMPOSITE                               Filter only composite content views
                                                     One of true/false, yes/no, 1/0.
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
 --environment-id ENVIRONMENT_ID                     (--environment-id is deprecated: Use --lifecycle-environment-id instead)
 --full-result FULL_RESULT                           Whether or not to show all results
                                                     One of true/false, yes/no, 1/0.
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME  Lifecycle environment name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
 --name NAME                                         Name of the content view
 --noncomposite NONCOMPOSITE                         Filter out composite content views
                                                     One of true/false, yes/no, 1/0.
 --nondefault NONDEFAULT                             Filter out default content views
                                                     One of true/false, yes/no, 1/0.
 --order ORDER                                       Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 --page PAGE                                         Page number, starting at 1
 --per-page PER_PAGE                                 Number of results per page to return
 --search SEARCH                                     Search string
 --without WITHOUT                                   Do not include this array of content views
                                                     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                     JSON is acceptable and preferred way for complex parameters
 -h, --help                                          Print help

2.16.10. hammer content-view publish

コンテンツビューを公開します。

Usage:
    hammer content-view publish [OPTIONS]

Options:
 --async                                 Do not wait for the task
 --description DESCRIPTION               Description for the new published content view version
 --id ID                                 Content view identifier
 --major MAJOR                           Override the major version number
 --minor MINOR                           Override the minor version number
 --name NAME                             Content view name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID to search by
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --repos-units REPOS_UNITS               Specify the list of units in each repo
                                         Comma separated list of values defined by a schema. See Option details section below.
                                         JSON is acceptable and preferred way for complex parameters
 -h, --help                              Print help

Option details:
  Following parameters accept format defined by its schema (bold are required):

  --repos-units       "label=string\,rpm_filenames=array, ... "

2.16.11. hammer content-view puppet-module

puppet モジュールを表示および管理します。

Usage:
    hammer content-view puppet-module [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 add                           Add a puppet module to the content view
 list                          List content view puppet modules
 remove                        Remove a puppet module from the content view

Options:
 -h, --help                    Print help

2.16.11.1. hammer content-view puppet-module add

Puppet モジュールをコンテンツビューに追加します。

Usage:
    hammer content-view puppet-module add [OPTIONS]

Options:
 --author AUTHOR                         Puppet module's author to search by
 --content-view CONTENT_VIEW_NAME        Content view name to search by
 --content-view-id CONTENT_VIEW_ID       Content view numeric identifier
 --id ID                                 The id of the puppet module to associate
 --name NAME                             Puppet module name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID to search by
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --uuid UUID                             Puppet module's UUID to search by
 -h, --help                              Print help

2.16.11.2. hammer content-view puppet-module list

コンテンツビューの Puppet モジュールを一覧表示します。

Usage:
    hammer content-view puppet-module list [OPTIONS]

Options:
 --author AUTHOR                         Author of the puppet module
 --content-view CONTENT_VIEW_NAME        Content view name to search by
 --content-view-id CONTENT_VIEW_ID       Content view numeric identifier
 --full-result FULL_RESULT               Whether or not to show all results
                                         One of true/false, yes/no, 1/0.
 --name NAME                             Name of the puppet module
 --order ORDER                           Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID to search by
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --page PAGE                             Page number, starting at 1
 --per-page PER_PAGE                     Number of results per page to return
 --search SEARCH                         Search string
 --uuid UUID                             Uuid of the puppet module
 -h, --help                              Print help

2.16.11.3. hammer content-view puppet-module remove

コンテンツビューから Puppet モジュールを削除します。

Usage:
    hammer content-view puppet-module remove [OPTIONS]

Options:
 --author AUTHOR                         Puppet module's author to search by
 --content-view CONTENT_VIEW_NAME        Content view name to search by
 --content-view-id CONTENT_VIEW_ID       Content view numeric identifier
 --id ID                                 Puppet module ID
 --name NAME                             Puppet module name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID to search by
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --uuid UUID                             Puppet module's UUID to search by
 -h, --help                              Print help

2.16.12. hammer content-view purge

古いバージョンのコンテンツビューを削除します。

Usage:
    hammer content-view purge [OPTIONS]

Options:
 --async                                 Do not wait for the task
 --count COUNT                           Count of unused versions to keep
                                         Default: 3
 --id ID                                 Content View numeric identifier
 --name NAME                             Content View name
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID to search by
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

Unfortunately the server does not support such operation.

2.16.13. hammer content-view remove

コンテンツビューからバージョンや環境を削除し、システムおよびキーを再度割り当てます。

Usage:
    hammer content-view remove [OPTIONS]

Options:
 --async                                               Do not wait for the task
 --content-view-version-ids VERSION_IDS                Version ids to remove
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --content-view-versions CONTENT_VIEW_VERSION_VERSIONS Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --environment-ids ENVIRONMENT_IDS                     (--environment-ids is deprecated: Use --lifecycle-environment-ids instead)
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --environments ENVIRONMENT_NAMES                      (--environments is deprecated: Use --lifecycle-environments instead)
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --id ID                                               Content view numeric identifier
 --key-content-view-id KEY_CONTENT_VIEW_ID             Content view to reassign orphaned activation keys to
 --key-environment-id KEY_ENVIRONMENT_ID               Environment to reassign orphaned activation keys to
 --lifecycle-environment-ids LIFECYCLE_ENVIRONMENT_IDS Environment ids to remove
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --lifecycle-environments LIFECYCLE_ENVIRONMENT_NAMES  Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --name NAME                                           Content view name to search by
 --organization ORGANIZATION_NAME                      Organization name to search by
 --organization-id ORGANIZATION_ID                     Organization ID to search by
 --organization-label ORGANIZATION_LABEL               Organization label to search by
 --system-content-view-id SYSTEM_CONTENT_VIEW_ID       Content view to reassign orphaned systems to
 --system-environment-id SYSTEM_ENVIRONMENT_ID         Environment to reassign orphaned systems to
 -h, --help                                            Print help

2.16.14. hammer content-view remove-from-environment

環境からコンテンツビューを削除します。

Usage:
    hammer content-view remove-from-environment [OPTIONS]

Options:
 --async                                             Do not wait for the task
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
 --environment-id ENVIRONMENT_ID                     (--environment-id is deprecated: Use --lifecycle-environment-id instead)
 --id ID                                             Content view numeric identifier
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME  Lifecycle environment name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
 --name NAME                                         Content view name to search by
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID to search by
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 -h, --help                                          Print help

2.16.15. hammer content-view remove-repository

リソースの関連付けを解除します。

Usage:
    hammer content-view remove-repository [OPTIONS]

Options:
 --id ID                                 Content view numeric identifier
 --name NAME                             Content view name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID to search by
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --product PRODUCT_NAME                  Product name to search by
 --product-id PRODUCT_ID                 Product numeric identifier
 --repository REPOSITORY_NAME            Repository name to search by
 --repository-id REPOSITORY_ID           Repository ID
 -h, --help                              Print help

2.16.16. hammer content-view remove-version

複合ビューからコンテンツビューのバージョンを削除します。

Usage:
    hammer content-view remove-version [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME                    Content view name to search by
 --content-view-id CONTENT_VIEW_ID                   Content view numeric identifier
 --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number
 --content-view-version-id CONTENT_VIEW_VERSION_ID   Content view version identifier
 --id ID                                             Content view numeric identifier
 --name NAME                                         Content view name to search by
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID to search by
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 -h, --help                                          Print help

2.16.17. hammer content-view update

コンテンツビューを更新します。

Usage:
    hammer content-view update [OPTIONS]

Options:
 --auto-publish AUTO_PUBLISH             Enable/Disable auto publish of composite view
                                         One of true/false, yes/no, 1/0.
 --component-ids COMPONENT_IDS           List of component content view version ids for composite views
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --description DESCRIPTION               Description for the content view
 --id ID                                 Content view identifier
 --name NAME                             Content view name to search by
 --new-name NEW_NAME                     New name for the content view
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID to search by
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --repository-ids REPOSITORY_IDS         List of repository ids
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --solve-dependencies SOLVE_DEPENDENCIES Solve RPM dependencies by default on Content View publish, defaults to
                                         False
                                         One of true/false, yes/no, 1/0.
 -h, --help                              Print help

2.16.18. hammer content-view version

コンテンツビューのバージョンを表示および管理します。

Usage:
    hammer content-view version [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 delete                        Remove content view version
 export                        Export a content view version
 export-legacy                 Export a content view (legacy method)
 import                        Import a content view version
 incremental-update            Perform an Incremental Update on one or more Content View Versions
 info                          Show content view version
 list                          List content view versions
 promote                       Promote a content view version
 republish-repositories        Forces a republish of the version's repositories' metadata

Options:
 -h, --help                    Print help

2.16.18.1. hammer content-view version delete

コンテンツビューバージョンを削除します。

Usage:
    hammer content-view version delete [OPTIONS]

Options:
 --async                                             Do not wait for the task
 --content-view CONTENT_VIEW_NAME                    Content view name to search by
 --content-view-id CONTENT_VIEW_ID                   Content view numeric identifier
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
 --environment-id ENVIRONMENT_ID                     (--environment-id is deprecated: Use --lifecycle-environment-id instead)
 --id ID                                             Content view version identifier
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME  Lifecycle environment name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 --version VERSION                                   Content view version number
 -h, --help                                          Print help

2.16.18.2. hammer content-view version export

コンテンツビューバージョンをエクスポートします。

Usage:
    hammer content-view version export [OPTIONS]

Options:
 --export-dir EXPORT_DIR       Directory to put content view version export into.
 --id ID                       Content View Version numeric identifier
 -h, --help                    Print help

2.16.18.3. hammer content-view version export-legacy

コンテンツビューをエクスポートします (従来の方法)。

Usage:
    hammer content-view version export-legacy [OPTIONS]

Options:
 --async                                             Do not wait for the task
 --content-view CONTENT_VIEW_NAME                    Content view name to search by
 --content-view-id CONTENT_VIEW_ID                   Content view numeric identifier
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
 --environment-id ENVIRONMENT_ID                     (--environment-id is deprecated: Use --lifecycle-environment-id instead)
 --export-to-iso EXPORT_TO_ISO                       Export to ISO format
                                                     One of true/false, yes/no, 1/0.
 --id ID                                             Content view version identifier
 --iso-mb-size ISO_MB_SIZE                           Maximum size of each ISO in MB
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME  Lifecycle environment name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 --since SINCE                                       Optional date of last export (ex: 2010-01-01T12:00:00Z)
 --version VERSION                                   Content view version number
 -h, --help                                          Print help

2.16.18.4. hammer content-view version import

コンテンツビューバージョンをインポートします。

Usage:
    hammer content-view version import [OPTIONS]

Options:
 --async                           Do not wait for the task
 --export-tar EXPORT_TAR           Location of export tar on disk
 --organization-id ORGANIZATION_ID Organization numeric identifier
 -h, --help                        Print help

2.16.18.5. hammer content-view version incremental-update

1 つ以上のコンテンツビューバージョンで増分更新を実行します。

Usage:
    hammer content-view version incremental-update [OPTIONS]

Options:
 --async                                             Do not wait for the task
 --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number
 --content-view-version-id CONTENT_VIEW_VERSION_ID   Content view version identifier
 --deb-ids DEB_IDS                                   Deb Package ids to copy into the new versions
                                                     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                     JSON is acceptable and preferred way for complex parameters
 --debs DEB_NAMES                                    Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                     JSON is acceptable and preferred way for complex parameters
 --description DESCRIPTION                           The description for the new generated Content View Versions
 --errata-ids ERRATA_IDS                             Errata ids to copy into the new versions
                                                     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                     JSON is acceptable and preferred way for complex parameters
 --host-ids HOST_IDS                                 IDs of hosts to update
                                                     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                     JSON is acceptable and preferred way for complex parameters
 --lifecycle-environment-ids ENVIRONMENT_IDS         List of lifecycle environment IDs to update the content view version in
                                                     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                     JSON is acceptable and preferred way for complex parameters
 --lifecycle-environments ENVIRONMENTS               List of lifecycle environment names to update the content view version in
                                                     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                     JSON is acceptable and preferred way for complex parameters
 --organization ORGANIZATION_NAME                    Organization name for resolving lifecycle environment names
 --organization-id ORGANIZATION_ID                   Organization id for resolving lifecycle environment names
 --package-ids PACKAGE_IDS                           Package ids to copy into the new versions
                                                     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                     JSON is acceptable and preferred way for complex parameters
 --packages PACKAGE_NAMES                            Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                     JSON is acceptable and preferred way for complex parameters
 --propagate-all-composites PROPAGATE_ALL_COMPOSITES If true, will publish a new composite version using any specified
                                                     Content_view_version_id that has been promoted to a lifecycle environment
                                                     One of true/false, yes/no, 1/0.
 --puppet-module-ids PUPPET_MODULE_IDS               Puppet Module ids to copy into the new versions
                                                     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                     JSON is acceptable and preferred way for complex parameters
 --puppet-modules PUPPET_MODULE_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                     JSON is acceptable and preferred way for complex parameters
 --resolve-dependencies RESOLVE_DEPENDENCIES         If true, when adding the specified errata or packages, any needed
                                                     Dependencies will be copied as well. Defaults to true
                                                     One of true/false, yes/no, 1/0.
 --update-all-hosts UPDATE                           Update all editable and applicable hosts within the specified Content View and \
                                                                    Lifecycle Environments
                                                     One of true/false, yes/no, 1/0.
 -h, --help                                          Print help

2.16.18.6. hammer content-view version info

コンテンツビューバージョンを表示します。

Usage:
    hammer content-view version info [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME                    Content view name to search by
 --content-view-id CONTENT_VIEW_ID                   Content view numeric identifier
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
 --environment-id ENVIRONMENT_ID                     (--environment-id is deprecated: Use --lifecycle-environment-id instead)
 --id ID                                             Content view version identifier
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME  Lifecycle environment name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 --version VERSION                                   Content view version number
 -h, --help                                          Print help

2.16.18.7. hammer content-view version list

コンテンツビューのバージョンを一覧表示します。

Usage:
    hammer content-view version list [OPTIONS]

Options:
 --composite-version-id COMPOSITE_VERSION_ID         Filter versions that are components in the specified composite version
 --content-view CONTENT_VIEW_NAME                    Content view name to search by
 --content-view-id CONTENT_VIEW_ID                   Content view numeric identifier
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
 --environment-id ENVIRONMENT_ID                     (--environment-id is deprecated: Use --lifecycle-environment-id instead)
 --full-result FULL_RESULT                           Whether or not to show all results
                                                     One of true/false, yes/no, 1/0.
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME  Lifecycle environment name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
 --order ORDER                                       Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 --page PAGE                                         Page number, starting at 1
 --per-page PER_PAGE                                 Number of results per page to return
 --puppet-module PUPPET_MODULE_NAME                  Name to search by
 --puppet-module-id PUPPET_MODULE_ID                 A puppet module identifier
 --search SEARCH                                     Search string
 --triggered-by-id TRIGGERED_BY_ID                   Filter composite versions whose publish was triggered by the specified
                                                     Component version
 --version VERSION                                   Filter versions by version number
 -h, --help                                          Print help

2.16.18.8. hammer content-view version promote

コンテンツビューバージョンをプロモートします。

Usage:
    hammer content-view version promote [OPTIONS]

Options:
 --async                                               Do not wait for the task
 --content-view CONTENT_VIEW_NAME                      Content view name to search by
 --content-view-id CONTENT_VIEW_ID                     Content view numeric identifier
 --description DESCRIPTION                             The description for the content view version promotion
 --environment-ids ENVIRONMENT_IDS                     Identifiers for Lifecycle Environment (--environment-ids is deprecated: Use --lifecycle-environment-ids instead)
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --force                                               Force content view promotion and bypass lifecycle environment restriction
 --from-lifecycle-environment FROM_ENVIRONMENT_ID      Environment name from where to promote its version from (if version is unknown)
 --from-lifecycle-environment-id FROM_ENVIRONMENT_ID   Id of the environment from where to promote its version from (if version is unknown)
 --id ID                                               Content view version identifier
 --lifecycle-environment-ids LIFECYCLE_ENVIRONMENT_IDS Identifiers for Lifecycle Environment
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --organization ORGANIZATION_NAME                      Organization name to search by
 --organization-id ORGANIZATION_ID                     Organization ID
 --organization-label ORGANIZATION_LABEL               Organization label to search by
 --to-lifecycle-environment TO_ENVIRONMENT             Name of the target environment
 --to-lifecycle-environment-id TO_ENVIRONMENT_ID       Id of the target environment
 --version VERSION                                     Content view version number
 -h, --help                                            Print help

2.16.18.9. hammer content-view version republish-repositories

バージョンのリポジトリーのメタデータを強制的に再公開します。

Usage:
    hammer content-view version republish-repositories [OPTIONS]

Options:
 --async                                 Do not wait for the task
 --content-view CONTENT_VIEW_NAME        Content view name to search by
 --content-view-id CONTENT_VIEW_ID       Content view numeric identifier
 --id ID                                 Content view version identifier
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --version VERSION                       Content view version number
 -h, --help                              Print help

2.17. hammer defaults

デフォルト設定を管理します。

Usage:
    hammer defaults [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 add                           Add a default parameter to config
 delete                        Delete a default param
 list                          List all the default parameters
 providers                     List all the providers

Options:
 -h, --help                    Print help

2.17.1. hammer defaults add

デフォルトパラメーターを設定に追加します。

Usage:
    hammer defaults add [OPTIONS]

Options:
 --param-name OPTION_NAME      The name of the default option (e.g. organization_id)
 --param-value OPTION_VALUE    The value for the default option
 --provider OPTION_PROVIDER    The name of the provider providing the value. For list available providers see `hammer defaults providers`
 -h, --help                    Print help

2.17.2. hammer defaults delete

デフォルトパラメーターを削除します。

Usage:
    hammer defaults delete [OPTIONS]

Options:
 --param-name OPTION_NAME      The name of the default option
 -h, --help                    Print help

2.17.3. hammer defaults list

デフォルトパラメーターの一覧を表示します。

Usage:
    hammer defaults list [OPTIONS]

Options:
 -h, --help                    Print help

2.17.4. hammer defaults providers

プロバイダーの一覧を表示します。

Usage:
    hammer defaults providers [OPTIONS]

Options:
 -h, --help                    Print help

2.18. hammer discovery

検出されたホストを操作します。

Usage:
    hammer discovery [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 auto-provision                Auto provision a host
 delete                        Delete a discovered host
 facts                         List all fact values
 info                          Show a discovered host
 list                          List all discovered hosts
 provision                     Provision a discovered host
 reboot                        Reboot a host
 refresh-facts                 Refresh the facts of a host

Options:
 -h, --help                    Print help

2.18.1. hammer discovery auto-provision

ホストの自動プロビジョニングを行います。

Usage:
    hammer discovery auto-provision [OPTIONS]

Options:
 --all                                   Auto provision all discovered hosts
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.18.2. hammer discovery delete

検出されたホストを削除します。

Usage:
    hammer discovery delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.18.3. hammer discovery facts

ファクト値の一覧を表示します。

Usage:
    hammer discovery facts [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  fact                string
  fact_short_name     string
  facts               string
  host                string
  host.hostgroup      string
  host_id             integer
  location            string
  location_id         integer
  name                string
  organization        string
  organization_id     integer
  origin              string
  reported_at         datetime
  short_name          string
  type                string
  value               string

2.18.4. hammer discovery info

検出されたホストを表示します。

Usage:
    hammer discovery info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.18.5. hammer discovery list

検出されたホストの一覧を表示します。

Usage:
    hammer discovery list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort results
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

2.18.6. hammer discovery provision

検出されたホストをプロビジョニングします。

Usage:
    hammer discovery provision [OPTIONS]

Options:
 --architecture ARCHITECTURE_NAME                        Architecture name
 --architecture-id ARCHITECTURE_ID
 --ask-root-password ASK_ROOT_PW                         One of true/false, yes/no, 1/0.
 --build BUILD                                           One of true/false, yes/no, 1/0.
 --capabilities CAPABILITIES
 --domain DOMAIN_NAME                                    Domain name
 --domain-id DOMAIN_ID                                   Numerical ID or domain name
 --enabled ENABLED                                       One of true/false, yes/no, 1/0.
 --host-parameters-attributes HOST_PARAMETERS_ATTRIBUTES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                         JSON is acceptable and preferred way for complex parameters
 --hostgroup HOSTGROUP_NAME                              Hostgroup name
 --hostgroup-id HOSTGROUP_ID
 --hostgroup-title HOSTGROUP_TITLE                       Hostgroup title
 --id ID
 --image IMAGE_NAME                                      Name to search by
 --image-id IMAGE_ID
 --interface INTERFACE                                   Interface parameters
                                                         Comma-separated list of key=value.
                                                         JSON is acceptable and preferred way for complex parameters
                                                         Can be specified multiple times.
 --ip IP                                                 Not required if using a subnet with DHCP Capsule
 --location LOCATION_NAME                                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE                         Location title
 --mac MAC                                               Not required if it's a virtual machine
 --managed MANAGED                                       One of true/false, yes/no, 1/0.
 --medium MEDIUM_NAME                                    Medium name
 --medium-id MEDIUM_ID
 --model MODEL_NAME                                      Model name
 --model-id MODEL_ID
 --name NAME                                             Name to search by
 --new-name NEW_NAME
 --operatingsystem OPERATINGSYSTEM_TITLE                 Operating system title
 --operatingsystem-id OPERATINGSYSTEM_ID
 --organization ORGANIZATION_NAME                        Organization name
 --organization-id ORGANIZATION_ID                       Organization ID
 --organization-title ORGANIZATION_TITLE                 Organization title
 --overwrite OVERWRITE                                   One of true/false, yes/no, 1/0.
 --owner-id OWNER_ID
 --parameters PARAMS                                     Host parameters
                                                         Comma-separated list of key=value.
                                                         JSON is acceptable and preferred way for complex parameters
 --partition-table PARTITION_TABLE_NAME                  Partition table name
 --partition-table-id PARTITION_TABLE_ID
 --progress-report-id PROGRESS_REPORT_ID                 UUID to track orchestration tasks status, GET
                                                         /api/orchestration/:UUID/tasks
 --provision-method METHOD                               Possible value(s): 'build', 'image'
 --puppet-ca-proxy-id PUPPET_CA_PROXY_ID
 --puppet-environment PUPPET_ENVIRONMENT_NAME            Puppet environment name
 --puppet-environment-id PUPPET_ENVIRONMENT_ID
 --puppet-proxy-id PUPPET_PROXY_ID
 --puppetclass-ids PUPPETCLASS_IDS                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                         JSON is acceptable and preferred way for complex parameters
 --pxe-loader PXE_LOADER                                 DHCP filename option (Grub2 or PXELinux by default)
                                                         Possible value(s): 'None', 'PXELinux BIOS', 'PXELinux UEFI', 'Grub UEFI', 'Grub2 BIOS', 'Grub2 ELF', 'Grub2 UEFI', 'Grub2 UEFI SecureBoot', 'iPXE Embedded', 'iPXE Chain BIOS', 'iPXE Chain UEFI'
 --root-password ROOT_PW
 --sp-subnet-id SP_SUBNET_ID
 --subnet SUBNET_NAME                                    Subnet name
 --subnet-id SUBNET_ID
 -h, --help                                              Print help

2.18.7. hammer discovery reboot

ホストを再起動します。

Usage:
    hammer discovery reboot [OPTIONS]

Options:
 --all                                   Reboot all discovered hosts
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.18.8. hammer discovery refresh-facts

ホストのファクトをリフレッシュします。

Usage:
    hammer discovery refresh-facts [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.19. hammer discovery-rule

検出されたルールを操作します。

Usage:
    hammer discovery-rule [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 create                        Create a discovery rule
 delete                        Delete a rule
 info                          Show a discovery rule
 list                          List all discovery rules
 update                        Update a rule

Options:
 -h, --help                    Print help

2.19.1. hammer discovery-rule create

検出ルールを作成します。

Usage:
    hammer discovery-rule create [OPTIONS]

Options:
 --enabled ENABLED                         Flag is used for temporary shutdown of rules
                                           One of true/false, yes/no, 1/0.
 --hostgroup HOSTGROUP_NAME                Hostgroup name
 --hostgroup-id HOSTGROUP_ID
 --hostgroup-title HOSTGROUP_TITLE         Hostgroup title
 --hostname HOSTNAME                       Defines a pattern to assign human-readable hostnames to the matching hosts
 --hosts-limit HOSTS_LIMIT
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               Location ID for provisioned hosts
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --max-count MAX_COUNT                     Enables to limit maximum amount of provisioned hosts per rule
 --name NAME                               Represents rule name shown to the users
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       Organization ID for provisioned hosts
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --priority PRIORITY                       Puts the rules in order, low numbers go first. Must be greater then zero
 --search SEARCH                           Query to match discovered hosts for the particular rule
 -h, --help                                Print help

2.19.2. hammer discovery-rule delete

ルールを削除します。

Usage:
    hammer discovery-rule delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.19.3. hammer discovery-rule info

検出ルールを表示します。

Usage:
    hammer discovery-rule info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.19.4. hammer discovery-rule list

検出ルールの一覧を表示します。

Usage:
    hammer discovery-rule list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort results
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

2.19.5. hammer discovery-rule update

ルールを更新します。

Usage:
    hammer discovery-rule update [OPTIONS]

Options:
 --enabled ENABLED                         Flag is used for temporary shutdown of rules
                                           One of true/false, yes/no, 1/0.
 --hostgroup HOSTGROUP_NAME                Hostgroup name
 --hostgroup-id HOSTGROUP_ID
 --hostgroup-title HOSTGROUP_TITLE         Hostgroup title
 --hostname HOSTNAME                       Defines a pattern to assign human-readable hostnames to the matching hosts
 --hosts-limit HOSTS_LIMIT
 --id ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               Location ID for provisioned hosts
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --max-count MAX_COUNT                     Enables to limit maximum amount of provisioned hosts per rule
 --name NAME                               Name to search by
 --new-name NEW_NAME                       Represents rule name shown to the users
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       Organization ID for provisioned hosts
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --priority PRIORITY                       Puts the rules in order, low numbers go first. Must be greater then zero
 --search SEARCH                           Query to match discovered hosts for the particular rule
 -h, --help                                Print help

2.20. hammer docker

Docker コンテナを操作します。

Usage:
    hammer docker [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 manifest                      Manage docker manifests
 tag                           Manage docker tags

Options:
 -h, --help                    Print help

2.20.1. hammer docker manifest

docker マニフェストを管理します。

Usage:
    hammer docker manifest [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 info                          Show a docker manifest
 list                          List docker_manifests

Options:
 -h, --help                    Print help

2.20.1.1. hammer docker manifest info

docker マニフェストを表示します。

Usage:
    hammer docker manifest info [OPTIONS]

Options:
 --id ID                       A docker manifest identifier
 --name NAME                   Name to search by
 --repository REPOSITORY_NAME  Repository name to search by
 --repository-id REPOSITORY_ID Repository ID
 -h, --help                    Print help

2.20.1.2. hammer docker manifest list

docker マニフェストの一覧を表示します。

Usage:
    hammer docker manifest list [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME                    Content view name to search by
 --content-view-filter CONTENT_VIEW_FILTER_NAME      Name to search by
 --content-view-filter-id CONTENT_VIEW_FILTER_ID     Filter identifier
 --content-view-id CONTENT_VIEW_ID                   Content view numeric identifier
 --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number
 --content-view-version-id CONTENT_VIEW_VERSION_ID   Content view version identifier
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
 --environment-id ENVIRONMENT_ID                     (--environment-id is deprecated: Use --lifecycle-environment-id instead)
 --full-result FULL_RESULT                           Whether or not to show all results
                                                     One of true/false, yes/no, 1/0.
 --ids IDS                                           Ids to filter content by
                                                     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                     JSON is acceptable and preferred way for complex parameters
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME  Lifecycle environment name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
 --order ORDER                                       Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 --page PAGE                                         Page number, starting at 1
 --per-page PER_PAGE                                 Number of results per page to return
 --product PRODUCT_NAME                              Product name to search by
 --product-id PRODUCT_ID                             Product numeric identifier
 --repository REPOSITORY_NAME                        Repository name to search by
 --repository-id REPOSITORY_ID                       Repository ID
 --search SEARCH                                     Search string
 -h, --help                                          Print help

2.20.2. hammer docker tag

Docker Tags を管理します。

Usage:
    hammer docker tag [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 info                          Show a docker tag
 list                          List docker_tags

Options:
 -h, --help                    Print help

2.20.2.1. hammer docker tag info

docker タグを表示します。

Usage:
    hammer docker tag info [OPTIONS]

Options:
 --id ID                       A docker tag identifier
 --name NAME                   Name to search by
 --repository REPOSITORY_NAME  Repository name to search by
 --repository-id REPOSITORY_ID Repository ID
 -h, --help                    Print help

2.20.2.2. hammer docker tag list

docker タグを一覧表示します。

Usage:
    hammer docker tag list [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME                    Content view name to search by
 --content-view-filter CONTENT_VIEW_FILTER_NAME      Name to search by
 --content-view-filter-id CONTENT_VIEW_FILTER_ID     Filter identifier
 --content-view-id CONTENT_VIEW_ID                   Content view numeric identifier
 --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number
 --content-view-version-id CONTENT_VIEW_VERSION_ID   Content view version identifier
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
 --environment-id ENVIRONMENT_ID                     (--environment-id is deprecated: Use --lifecycle-environment-id instead)
 --full-result FULL_RESULT                           Whether or not to show all results
                                                     One of true/false, yes/no, 1/0.
 --ids IDS                                           Ids to filter content by
                                                     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                     JSON is acceptable and preferred way for complex parameters
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME  Lifecycle environment name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
 --order ORDER                                       Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 --page PAGE                                         Page number, starting at 1
 --per-page PER_PAGE                                 Number of results per page to return
 --product PRODUCT_NAME                              Product name to search by
 --product-id PRODUCT_ID                             Product numeric identifier
 --repository REPOSITORY_NAME                        Repository name to search by
 --repository-id REPOSITORY_ID                       Repository ID
 --search SEARCH                                     Search string
 -h, --help                                          Print help

2.21. hammer domain

ドメインを操作します。

Usage:
    hammer domain [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 create                        Create a domain
 delete                        Delete a domain
 delete-parameter              Delete parameter for a domain
 info                          Show a domain
 list                          List of domains
 set-parameter                 Create or update parameter for a domain
 update                        Update a domain

Options:
 -h, --help                    Print help

2.21.1. hammer domain create

ドメインを作成します。

Usage:
    hammer domain create [OPTIONS]

Options:
 --description DESC                        Full name describing the domain
 --dns DNS_NAME                            Name of DNS proxy to use within this domain
 --dns-id DNS_ID                           ID of DNS proxy to use within this domain
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --name NAME                               The full DNS domain name
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 -h, --help                                Print help

2.21.2. hammer domain delete

ドメインを削除します。

Usage:
    hammer domain delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Domain name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.21.3. hammer domain delete-parameter

ドメインのパラメーターを削除します。

Usage:
    hammer domain delete-parameter [OPTIONS]

Options:
 --domain DOMAIN_NAME          Domain name
 --domain-id DOMAIN_ID         Numerical ID or domain name
 --name NAME                   Parameter name
 -h, --help                    Print help

2.21.4. hammer domain info

ドメインを表示します。

Usage:
    hammer domain info [OPTIONS]

Options:
 --id ID                                         Numerical ID or domain name
 --location LOCATION_NAME                        Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE                 Location title
 --name NAME                                     Domain name
 --organization ORGANIZATION_NAME                Organization name
 --organization-id ORGANIZATION_ID               Organization ID
 --organization-title ORGANIZATION_TITLE         Organization title
 --show-hidden-parameters SHOW_HIDDEN_PARAMETERS Display hidden parameter values
                                                 One of true/false, yes/no, 1/0.
 -h, --help                                      Print help

2.21.5. hammer domain list

ドメインを一覧表示します。

Usage:
    hammer domain list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 --subnet SUBNET_NAME                    Subnet name
 --subnet-id SUBNET_ID
 -h, --help                              Print help

Search / Order fields:
  fullname            string
  location            string
  location_id         integer
  name                string
  organization        string
  organization_id     integer
  params              text

2.21.6. hammer domain set-parameter

ドメインのパラメーターを作成または更新します。

Usage:
    hammer domain set-parameter [OPTIONS]

Options:
 --domain DOMAIN_NAME            Domain name
 --domain-id DOMAIN_ID           Numerical ID or domain name
 --hidden-value HIDDEN_VALUE     Should the value be hidden
                                 One of true/false, yes/no, 1/0.
 --name NAME                     Parameter name
 --parameter-type PARAMETER_TYPE Type of the parameter
                                 Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json'
                                 Default: "string"
 --value VALUE                   Parameter value
 -h, --help                      Print help

2.21.7. hammer domain update

ドメインを更新します。

Usage:
    hammer domain update [OPTIONS]

Options:
 --description DESC                        Full name describing the domain
 --dns DNS_NAME                            Name of DNS proxy to use within this domain
 --dns-id DNS_ID                           ID of DNS proxy to use within this domain
 --id ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --name NAME                               Domain name
 --new-name NEW_NAME                       The full DNS domain name
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 -h, --help                                Print help

2.22. hammer environment

環境を操作します。

Usage:
    hammer environment [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 create                        Create an environment
 delete                        Delete an environment
 info                          Show an environment
 list                          List all environments
 sc-params                     List all smart class parameters
 update                        Update an environment

Options:
 -h, --help                    Print help

2.22.1. hammer environment create

環境を作成します。

Usage:
    hammer environment create [OPTIONS]

Options:
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --name NAME
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 -h, --help                                Print help

2.22.2. hammer environment delete

環境を削除します。

Usage:
    hammer environment delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Puppet environment name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.22.3. hammer environment info

環境を表示します。

Usage:
    hammer environment info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Puppet environment name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.22.4. hammer environment list

環境を一覧表示します。

Usage:
    hammer environment list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --puppet-class PUPPET_CLASS_NAME        Puppet class name
 --puppet-class-id PUPPET_CLASS_ID       ID of Puppet class
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  content_view           string
  lifecycle_environment  string
  location               string
  location_id            integer
  name                   string
  organization           string
  organization_id        integer

2.22.5. hammer environment sc-params

スマートクラスパラメーターの一覧を表示します。

Usage:
    hammer environment sc-params [OPTIONS]

Options:
 --environment ENVIRONMENT_NAME                Environment name (--environment is deprecated: Use --puppet-environment instead)
 --environment-id ENVIRONMENT_ID               (--environment-id is deprecated: Use --puppet-environment-id instead)
 --location LOCATION_NAME                      Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE               Location title
 --order ORDER                                 Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME              Organization name
 --organization-id ORGANIZATION_ID             Organization ID
 --organization-title ORGANIZATION_TITLE       Organization title
 --page PAGE                                   Paginate results
 --per-page PER_PAGE                           Number of entries per request
 --puppet-environment PUPPET_ENVIRONMENT_NAME  Puppet environment name
 --puppet-environment-id PUPPET_ENVIRONMENT_ID
 --search SEARCH                               Filter results
 --show-hidden SHOW_HIDDEN                     Display hidden values
                                               One of true/false, yes/no, 1/0.
 -h, --help                                    Print help

Search / Order fields:
  avoid_duplicates    Values: true, false
  environment         string
  key                 string
  merge_default       Values: true, false
  merge_overrides     Values: true, false
  override            Values: true, false
  parameter           string
  puppetclass         string
  puppetclass_name    string

2.22.6. hammer environment update

環境を更新します。

Usage:
    hammer environment update [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --name NAME                               Puppet environment name
 --new-name NEW_NAME
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 -h, --help                                Print help

2.23. hammer erratum

エラータを操作します。

Usage:
    hammer erratum [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 info                          Show an erratum
 list                          List errata

Options:
 -h, --help                    Print help

2.23.1. hammer erratum info

エラータを表示します。

Usage:
    hammer erratum info [OPTIONS]

Options:
 --id ID                       An erratum identifier
 --name NAME                   Name to search by
 --repository REPOSITORY_NAME  Repository name to search by
 --repository-id REPOSITORY_ID Repository ID
 -h, --help                    Print help

2.23.2. hammer erratum list

エラータを一覧表示します。

Usage:
    hammer erratum list [OPTIONS]

Options:
 --available-for AVAILABLE_FOR                             Return errata that can be added to the specified object.  The values
                                                           'content_view_version' and 'content_view_filter are supported.
 --content-view CONTENT_VIEW_NAME                          Content view name to search by
 --content-view-filter CONTENT_VIEW_FILTER_NAME            Name to search by
 --content-view-filter-id CONTENT_VIEW_FILTER_ID           Filter identifier
 --content-view-id CONTENT_VIEW_ID                         Content view numeric identifier
 --content-view-version CONTENT_VIEW_VERSION_VERSION       Content view version number
 --content-view-version-id CONTENT_VIEW_VERSION_ID         Content view version identifier
 --cve CVE                                                 CVE identifier
 --environment ENVIRONMENT_NAME                            Lifecycle environment name to search by
 --environment-id ENVIRONMENT_ID
 --errata-restrict-applicable ERRATA_RESTRICT_APPLICABLE   Return errata that are applicable to one or more hosts (defaults to true if
                                                           Host_id is specified)
                                                           One of true/false, yes/no, 1/0.
 --errata-restrict-installable ERRATA_RESTRICT_INSTALLABLE Return errata that are upgradable on one or more hosts
                                                           One of true/false, yes/no, 1/0.
 --full-result FULL_RESULT                                 Whether or not to show all results
                                                           One of true/false, yes/no, 1/0.
 --host HOST_NAME                                          Host name
 --host-id HOST_ID
 --order ORDER                                             Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME                          Organization name to search by
 --organization-id ORGANIZATION_ID                         Organization ID
 --organization-label ORGANIZATION_LABEL                   Organization label to search by
 --page PAGE                                               Page number, starting at 1
 --per-page PER_PAGE                                       Number of results per page to return
 --product PRODUCT_NAME                                    Product name to search by
 --product-id PRODUCT_ID                                   Product numeric identifier
 --repository REPOSITORY_NAME                              Repository name to search by
 --repository-id REPOSITORY_ID                             Repository ID
 --search SEARCH                                           Search string
 -h, --help                                                Print help

2.24. hammer export-templates

テンプレートを git repo またはサーバー上のディレクトリーにエクスポートします。

Usage:
    hammer export-templates [OPTIONS]

Options:
 --branch BRANCH                             Branch in Git repo.
 --dirname DIRNAME                           The directory within Git repo containing the templates
 --filter FILTER                             Export templates with names matching this regex (case-insensitive; snippets
                                             Are not filtered).
 --location LOCATION_NAME                    Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS                 REPLACE locations with given ids
                                             Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                             JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE             Location title
 --location-titles LOCATION_TITLES           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                             JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                  Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                             JSON is acceptable and preferred way for complex parameters
 --metadata-export-mode METADATA_EXPORT_MODE Specify how to handle metadata
                                             Possible value(s): 'refresh', 'keep', 'remove'
 --negate NEGATE                             Negate the prefix (for purging).
                                             One of true/false, yes/no, 1/0.
 --organization ORGANIZATION_NAME            Organization name
 --organization-id ORGANIZATION_ID           Organization ID
 --organization-ids ORGANIZATION_IDS         REPLACE organizations with given ids.
                                             Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                             JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE     Organization title
 --organization-titles ORGANIZATION_TITLES   Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                             JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES          Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                             JSON is acceptable and preferred way for complex parameters
 --repo REPO                                 Override the default repo from settings.
 --verbose BE_VERBOSE                        Be verbose
                                             One of true/false, yes/no, 1/0.
 -h, --help                                  Print help

2.25. hammer fact

fact を検索します。

Usage:
    hammer fact [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 list                          List all fact values

Options:
 -h, --help                    Print help

2.25.1. hammer fact list

ファクト値の一覧を表示します。

Usage:
    hammer fact list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  fact                string
  fact_short_name     string
  facts               string
  host                string
  host.hostgroup      string
  host_id             integer
  location            string
  location_id         integer
  name                string
  organization        string
  organization_id     integer
  origin              string
  reported_at         datetime
  short_name          string
  type                string
  value               string

2.26. hammer file

ファイルを操作します。

Usage:
    hammer file [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 info                          Show a file
 list                          List files

Options:
 -h, --help                    Print help

2.26.1. hammer file info

ファイルを表示します。

Usage:
    hammer file info [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME                    Content view name to search by
 --content-view-id CONTENT_VIEW_ID                   Content view numeric identifier
 --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number
 --content-view-version-id CONTENT_VIEW_VERSION_ID   Content View Version ID
 --id ID                                             A file identifier
 --name NAME                                         File name to search by
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 --product PRODUCT_NAME                              Product name to search by
 --product-id PRODUCT_ID                             Product numeric identifier
 --repository REPOSITORY_NAME                        Repository name to search by
 --repository-id REPOSITORY_ID                       Repository ID
 -h, --help                                          Print help

2.26.2. hammer file list

ファイルを一覧表示します。

Usage:
    hammer file list [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME                    Content view name to search by
 --content-view-filter CONTENT_VIEW_FILTER_NAME      Name to search by
 --content-view-filter-id CONTENT_VIEW_FILTER_ID     Filter identifier
 --content-view-id CONTENT_VIEW_ID                   Content view numeric identifier
 --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number
 --content-view-version-id CONTENT_VIEW_VERSION_ID   Content view version identifier
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by
 --environment-id ENVIRONMENT_ID
 --full-result FULL_RESULT                           Whether or not to show all results
                                                     One of true/false, yes/no, 1/0.
 --ids IDS                                           Ids to filter content by
                                                     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                     JSON is acceptable and preferred way for complex parameters
 --order ORDER                                       Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 --page PAGE                                         Page number, starting at 1
 --per-page PER_PAGE                                 Number of results per page to return
 --product PRODUCT_NAME                              Product name to search by
 --product-id PRODUCT_ID                             Product numeric identifier
 --repository REPOSITORY_NAME                        Repository name to search by
 --repository-id REPOSITORY_ID                       Repository ID
 --search SEARCH                                     Search string
 -h, --help                                          Print help

2.27. hammer filter

パーミッションフィルターを管理します。

Usage:
    hammer filter [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 available-permissions         List all permissions
 available-resources           List available resource types
 create                        Create a filter
 delete                        Delete a filter
 info                          Show a filter
 list                          List all filters
 update                        Update a filter

Options:
 -h, --help                    Print help

2.27.1. hammer filter available-permissions

パーミッションの一覧を表示します。

Usage:
    hammer filter available-permissions [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --resource-type RESOURCE_TYPE
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  name                string
  resource_type       string

2.27.2. hammer filter available-resources

利用可能なリソースタイプを一覧表示します。

Usage:
    hammer filter available-resources [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.27.3. hammer filter create

フィルターを作成します。

Usage:
    hammer filter create [OPTIONS]

Options:
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --override OVERRIDE                       One of true/false, yes/no, 1/0.
 --permission-ids PERMISSION_IDS           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --permissions PERMISSION_NAMES            Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --role ROLE_NAME                          User role name
 --role-id ROLE_ID
 --search SEARCH
 -h, --help                                Print help

Filters inherit organizations and locations from its role by default. This behavior can be changed by setting --override=true.
Therefore options --organization[s|-ids] and --location[s|-ids] are applicable only when the override flag is set.

Overriding organizations and locations:

2.27.4. hammer filter delete

フィルターを削除します。

Usage:
    hammer filter delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.27.5. hammer filter info

フィルターを表示します。

Usage:
    hammer filter info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.27.6. hammer filter list

すべてのフィルターの一覧を表示します。

Usage:
    hammer filter list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  limited             Values: true, false
  location            string
  location_id         integer
  organization        string
  organization_id     integer
  override            Values: true, false
  permission          string
  resource            string
  role                string
  role_id             integer
  search              text
  unlimited           Values: true, false

2.27.7. hammer filter update

フィルターを更新します。

Usage:
    hammer filter update [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --override OVERRIDE                       One of true/false, yes/no, 1/0.
 --permission-ids PERMISSION_IDS           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --permissions PERMISSION_NAMES            Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --role ROLE_NAME                          User role name
 --role-id ROLE_ID
 --search SEARCH
 -h, --help                                Print help

Filters inherit organizations and locations from its role by default. This behavior can be changed by setting --override=true.
Therefore options --organization[s|-ids] and --location[s|-ids] are applicable only when the override flag is set.

Overriding organizations and locations:

2.28. hammer foreign-input-set

外部入力セットを管理します。

Usage:
    hammer foreign-input-set [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 create                        Create a foreign input set
 delete                        Delete a foreign input set
 info                          Show foreign input set details
 list                          List foreign input sets
 update                        Update a foreign input set

Options:
 -h, --help                    Print help

2.28.1. hammer foreign-input-set create

外部入力セットを作成します。

Usage:
    hammer foreign-input-set create [OPTIONS]

Options:
 --description DESCRIPTION               Input set description
 --exclude EXCLUDE                       A comma separated list of input names to be included from the foreign
                                         Template.
 --include INCLUDE                       A comma separated list of input names to be included from the foreign
                                         Template.
 --include-all INCLUDE_ALL               Include all inputs from the foreign template
                                         One of true/false, yes/no, 1/0.
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --target-template-id TARGET_TEMPLATE_ID Target template ID
 --template-id TEMPLATE_ID
 -h, --help                              Print help

2.28.2. hammer foreign-input-set delete

外部入力セットを削除します。

Usage:
    hammer foreign-input-set delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --template-id TEMPLATE_ID
 -h, --help                              Print help

2.28.3. hammer foreign-input-set info

外部入力セット詳細を表示します。

Usage:
    hammer foreign-input-set info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --template-id TEMPLATE_ID
 -h, --help                              Print help

2.28.4. hammer foreign-input-set list

外部入力セットを一覧表示します。

Usage:
    hammer foreign-input-set list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 --template-id TEMPLATE_ID
 -h, --help                              Print help

2.28.5. hammer foreign-input-set update

外部入力セットを更新します。

Usage:
    hammer foreign-input-set update [OPTIONS]

Options:
 --description DESCRIPTION               Input set description
 --exclude EXCLUDE                       A comma separated list of input names to be included from the foreign
                                         Template.
 --id ID
 --include INCLUDE                       A comma separated list of input names to be included from the foreign
                                         Template.
 --include-all INCLUDE_ALL               Include all inputs from the foreign template
                                         One of true/false, yes/no, 1/0.
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --new-name NEW_NAME
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --target-template-id TARGET_TEMPLATE_ID Target template ID
 --template-id TEMPLATE_ID
 -h, --help                              Print help

2.29. hammer full-help

全 hammer コマンドの help の表示します。

Usage:
    hammer full-help [OPTIONS]

Options:
 --md                          Format output in markdown
 -h, --help                    Print help

2.30. hammer global-parameter

グローバルパラメーターを操作します。

Usage:
    hammer global-parameter [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 delete                        Delete a global parameter
 list                          List all global parameters
 set                           Set a global parameter

Options:
 -h, --help                    Print help

2.30.1. hammer global-parameter delete

グローバルパラメーターを削除します。

Usage:
    hammer global-parameter delete [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Common parameter name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.30.2. hammer global-parameter list

グローバルパラメーターを一覧表示します。

Usage:
    hammer global-parameter list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 --show-hidden SHOW_HIDDEN               Display hidden values
                                         One of true/false, yes/no, 1/0.
 -h, --help                              Print help

Search / Order fields:
  domain_name         string
  host_group_name     string
  host_name           string
  key_type            string
  location_name       string
  name                string
  organization_name   string
  os_name             string
  parameter_type      string
  subnet_name         text
  type                string
  value               text

2.30.3. hammer global-parameter set

グローバルパラメーターを設定します。

Usage:
    hammer global-parameter set [OPTIONS]

Options:
 --hidden-value HIDDEN_VALUE     Should the value be hidden
                                 One of true/false, yes/no, 1/0.
 --name NAME                     Parameter name
 --parameter-type PARAMETER_TYPE Type of the parameter
                                 Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json'
                                 Default: "string"
 --value VALUE                   Parameter value
 -h, --help                      Print help

2.31. hammer gpg

サーバー上で GPG キーアクションを操作します。

Usage:
    hammer gpg [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 create                        Create a gpg key
 delete                        Destroy a gpg key
 info                          Show a gpg key
 list                          List gpg keys
 update                        Update a repository

Options:
 -h, --help                    Print help

2.31.1. hammer gpg create

GPG キーを作成します。

Usage:
    hammer gpg create [OPTIONS]

Options:
 --key GPG_KEY_FILE                      GPG Key file
 --name NAME                             Identifier of the gpg key
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.31.2. hammer gpg delete

GPG キーを破棄します。

Usage:
    hammer gpg delete [OPTIONS]

Options:
 --id ID                                 Gpg key numeric identifier
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.31.3. hammer gpg info

GPG キーを表示します。

Usage:
    hammer gpg info [OPTIONS]

Options:
 --id ID                                 Gpg key numeric identifier
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.31.4. hammer gpg list

GPG キーを一覧表示します。

Usage:
    hammer gpg list [OPTIONS]

Options:
 --full-result FULL_RESULT               Whether or not to show all results
                                         One of true/false, yes/no, 1/0.
 --name NAME                             Name of the GPG key
 --order ORDER                           Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --page PAGE                             Page number, starting at 1
 --per-page PER_PAGE                     Number of results per page to return
 --search SEARCH                         Search string
 -h, --help                              Print help

2.31.5. hammer gpg update

リポジトリーを更新します。

Usage:
    hammer gpg update [OPTIONS]

Options:
 --id ID                                 Gpg key numeric identifier
 --key GPG_KEY_FILE                      GPG Key file
 --name NAME                             Name to search by
 --new-name NEW_NAME                     Identifier of the gpg key
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.32. hammer host

ホストを操作します。

Usage:
    hammer host [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 ansible-roles                 Manage Ansible roles on a host
 boot                          Boot host from specified device
 config-reports                List all reports
 create                        Create a host
 delete                        Delete a host
 delete-parameter              Delete parameter for a host
 disassociate                  Disassociate a host
 enc-dump                      Dump host's ENC YAML
 errata                        Manage errata on your hosts
 facts                         List all fact values
 info                          Show a host
 interface                     View and manage host's network interfaces
 list                          List all hosts
 package                       Manage packages on your hosts
 package-group                 Manage package-groups on your hosts
 puppet-classes                List all Puppet classes
 puppetrun                     Force a Puppet agent run on the host
 reboot                        Reboot a host
 rebuild-config                Rebuild orchestration related configurations for host
 reports                       List all reports
 reset                         Reset a host
 sc-params                     List all smart class parameters
 set-parameter                 Create or append a parameter for a host
 smart-variables               List all smart variables
 start                         Power a host on
 status                        Get configuration status of host
 stop                          Power a host off
 subscription                  Manage subscription information on your hosts
 update                        Update a host

Options:
 -h, --help                    Print help

2.32.1. hammer host ansible-roles

ホストで Ansible ロールを実行します。

Usage:
    hammer host ansible-roles [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 assign                        Assigns Ansible roles to a host
 list                          List all Ansible roles for a host
 play                          Plays Ansible roles on a host

Options:
 -h, --help                    Print help

2.32.1.1. hammer host ansible-roles assign

Ansible ロールをホストに割り当てます。

Usage:
    hammer host ansible-roles assign [OPTIONS]

Options:
 --ansible-role-ids ANSIBLE_ROLE_IDS     Ansible roles to assign to a host
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --ansible-roles ANSIBLE_ROLE_NAMES      Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Host name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.32.1.2. hammer host ansible-roles list

ホストの Ansible ロールをすべて一覧表示します。

Usage:
    hammer host ansible-roles list [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Host name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.32.1.3. hammer host ansible-roles play

ホストで Ansible ロールをプレイします。

Usage:
    hammer host ansible-roles play [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Host name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.32.2. hammer host boot

指定されたデバイスからホストを起動します。

Usage:
    hammer host boot [OPTIONS]

Options:
 --device DEVICE                         Boot device, valid devices are disk, cdrom, pxe, bios
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Host name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.32.3. hammer host config-reports

レポートの一覧を表示します。

Usage:
    hammer host config-reports [OPTIONS]

Options:
 --id ID                                 Host id
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Host name
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  applied             integer
  environment         string
  eventful            Values: true, false
  failed              integer
  failed_restarts     integer
  host                string
  host_id             integer
  hostgroup           string
  hostgroup_fullname  string
  hostgroup_title     string
  last_report         datetime
  location            string
  log                 text
  organization        string
  origin              string
  pending             integer
  reported            datetime
  resource            text
  restarted           integer
  skipped             integer

2.32.4. hammer host create

ホストを作成します。

Usage:
    hammer host create [OPTIONS]

Options:
 --ansible-role-ids ANSIBLE_ROLE_IDS                           IDs of associated ansible roles
                                                               Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                               JSON is acceptable and preferred way for complex parameters
 --ansible-roles ANSIBLE_ROLE_NAMES                            Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                               JSON is acceptable and preferred way for complex parameters
 --architecture ARCHITECTURE_NAME                              Architecture name
 --architecture-id ARCHITECTURE_ID
 --ask-root-password ASK_ROOT_PW                               One of true/false, yes/no, 1/0.
 --autoheal AUTOHEAL                                           Sets whether the Host will autoheal subscriptions upon checkin
                                                               One of true/false, yes/no, 1/0.
 --build BUILD                                                 One of true/false, yes/no, 1/0.
 --comment COMMENT                                             Additional information about this host
 --compute-attributes COMPUTE_ATTRS                            Compute resource attributes
                                                               Comma-separated list of key=value.
                                                               JSON is acceptable and preferred way for complex parameters
 --compute-profile COMPUTE_PROFILE_NAME                        Compute profile name
 --compute-profile-id COMPUTE_PROFILE_ID
 --compute-resource COMPUTE_RESOURCE_NAME                      Compute resource name
 --compute-resource-id COMPUTE_RESOURCE_ID
 --config-group-ids CONFIG_GROUP_IDS                           IDs of associated config groups
                                                               Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                               JSON is acceptable and preferred way for complex parameters
 --config-groups CONFIG_GROUP_NAMES                            Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                               JSON is acceptable and preferred way for complex parameters
 --content-source CONTENT_SOURCE_NAME                          Content Source name
 --content-source-id CONTENT_SOURCE_ID
 --content-view CONTENT_VIEW_NAME                              Name to search by
 --content-view-id CONTENT_VIEW_ID                             Content view numeric identifier
 --domain DOMAIN_NAME                                          Domain name
 --domain-id DOMAIN_ID                                         Numerical ID or domain name
 --enabled ENABLED                                             Include this host within Satellite reporting
                                                               One of true/false, yes/no, 1/0.
 --environment ENVIRONMENT_NAME                                Environment name (--environment is deprecated: Use --puppet-environment instead)
 --environment-id ENVIRONMENT_ID                               (--environment-id is deprecated: Use --puppet-environment-id instead)
 --hostgroup HOSTGROUP_NAME                                    Hostgroup name
 --hostgroup-id HOSTGROUP_ID
 --hostgroup-title HOSTGROUP_TITLE                             Hostgroup title
 --hypervisor-guest-uuids HYPERVISOR_GUEST_UUIDS               List of hypervisor guest uuids
                                                               Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                               JSON is acceptable and preferred way for complex parameters
 --image IMAGE_NAME                                            Name to search by
 --image-id IMAGE_ID
 --installed-products-attributes INSTALLED_PRODUCTS_ATTRIBUTES List of products installed on the host
                                                               Comma separated list of values defined by a schema. See Option details section below.
                                                               JSON is acceptable and preferred way for complex parameters
 --interface INTERFACE                                         Interface parameters
                                                               Comma-separated list of key=value.
                                                               JSON is acceptable and preferred way for complex parameters
                                                               Can be specified multiple times.
 --ip IP                                                       Not required if using a subnet with DHCP Capsule
 --kickstart-repository REPOSITORY_NAME                        Kickstart repository name
 --kickstart-repository-id KICKSTART_REPOSITORY_ID             Repository Id associated with the kickstart repo used for provisioning
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME            Name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID           ID of the environment
 --location LOCATION_NAME                                      Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE                               Location title
 --mac MAC                                                     Required for managed host that is bare metal, not required if it's a
                                                               Virtual machine
 --managed MANAGED                                             True/False flag whether a host is managed or unmanaged. Note: this value
                                                               Also determines whether several parameters are required or not
                                                               One of true/false, yes/no, 1/0.
 --medium MEDIUM_NAME                                          Medium name
 --medium-id MEDIUM_ID
 --model MODEL_NAME                                            Model name
 --model-id MODEL_ID
 --name NAME
 --openscap-proxy-id OPENSCAP_PROXY_ID                         ID of OpenSCAP Capsule
 --operatingsystem OPERATINGSYSTEM_TITLE                       Operating system title
 --operatingsystem-id OPERATINGSYSTEM_ID
 --organization ORGANIZATION_NAME                              Organization name
 --organization-id ORGANIZATION_ID                             Organization ID
 --organization-title ORGANIZATION_TITLE                       Organization title
 --overwrite OVERWRITE                                         One of true/false, yes/no, 1/0.
                                                               Default: "true"
 --owner OWNER_LOGIN                                           Login of the owner
 --owner-id OWNER_ID                                           ID of the owner
 --owner-type OWNER_TYPE                                       Host's owner type
                                                               Possible value(s): 'User', 'Usergroup'
 --parameters PARAMS                                           Replaces with new host parameters
                                                               Comma-separated list of key=value.
                                                               JSON is acceptable and preferred way for complex parameters
 --partition-table PARTITION_TABLE_NAME                        Partition table name
 --partition-table-id PARTITION_TABLE_ID
 --product PRODUCT_NAME                                        Name to search by
 --product-id PRODUCT_ID                                       Product numeric identifier
 --progress-report-id PROGRESS_REPORT_ID                       UUID to track orchestration tasks status, GET
                                                               /api/orchestration/:UUID/tasks
 --provision-method PROVISION_METHOD                           The method used to provision the host.
                                                               Possible value(s): 'build', 'image', 'bootdisk'
 --puppet-ca-proxy PUPPET_CA_PROXY_NAME
 --puppet-ca-proxy-id PUPPET_CA_PROXY_ID                       Puppet CA Capsule ID
 --puppet-class-ids PUPPET_CLASS_IDS                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                               JSON is acceptable and preferred way for complex parameters
 --puppet-classes PUPPET_CLASS_NAMES                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                               JSON is acceptable and preferred way for complex parameters
 --puppet-environment PUPPET_ENVIRONMENT_NAME                  Puppet environment name
 --puppet-environment-id PUPPET_ENVIRONMENT_ID
 --puppet-proxy PUPPET_PROXY_NAME
 --puppet-proxy-id PUPPET_PROXY_ID                             Puppet Capsule ID
 --purpose-addons PURPOSE_ADDONS                               Sets the system add-ons
                                                               Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                               JSON is acceptable and preferred way for complex parameters
 --purpose-role PURPOSE_ROLE                                   Sets the system purpose usage
 --purpose-usage PURPOSE_USAGE                                 Sets the system purpose usage
 --pxe-loader PXE_LOADER                                       DHCP filename option (Grub2/PXELinux by default)
                                                               Possible value(s): 'None', 'PXELinux BIOS', 'PXELinux UEFI', 'Grub UEFI', 'Grub2 BIOS', 'Grub2 ELF', 'Grub2 UEFI', 'Grub2 UEFI SecureBoot', 'iPXE Embedded', 'iPXE Chain BIOS', 'iPXE Chain UEFI'
 --realm REALM_NAME                                            Name to search by
 --realm-id REALM_ID                                           Numerical ID or realm name
 --release-version RELEASE_VERSION                             Release version for this Host to use (7Server, 7.1, etc)
 --root-password ROOT_PW                                       Required if host is managed and value is not inherited from host group or default password in settings
 --service-level SERVICE_LEVEL                                 Service level to be used for autoheal
 --subnet SUBNET_NAME                                          Subnet name
 --subnet-id SUBNET_ID
 --volume VOLUME                                               Volume parameters
                                                               Comma-separated list of key=value.
                                                               JSON is acceptable and preferred way for complex parameters
                                                               Can be specified multiple times.
 -h, --help                                                    Print help

Option details:
  Following parameters accept format defined by its schema (bold are required):

  --installed-products-attributes  "product_id=string\,product_name=string\,arch=string\,version=string, ... "

Available keys for --interface:
  mac
  ip
  type                Possible values: interface, bmc, bond, bridge
  name
  subnet_id
  domain_id
  identifier
  managed             true/false
  primary             true/false, each managed hosts needs to have one primary interface.
  provision           true/false
  virtual             true/false

  For virtual=true:
    tag                 VLAN tag, this attribute has precedence over the subnet VLAN ID. Only for virtual interfaces.
    attached_to         Identifier of the interface to which this interface belongs, e.g. eth1.

  For type=bond:
    mode                Possible values: balance-rr, active-backup, balance-xor, broadcast, 802.3ad, balance-tlb, balance-alb
    attached_devices    Identifiers of slave interfaces, e.g. [eth1,eth2]
    bond_options

  For type=bmc:
    provider            always IPMI
    username
    password

Provider specific options:
  ec2:
    --volume:


    --interface:


    --compute-attributes:
      flavor_id
      image_id
      availability_zone
      security_group_ids
      managed_ip

  gce:
    --volume:


    --interface:


    --compute-attributes:
      machine_type
      image_id
      network
      external_ip

  libvirt:
    --volume:
      pool_name           One of available storage pools
      capacity            String value, eg. 10G
      format_type         Possible values: raw, qcow2

    --interface:
      compute_type        Possible values: bridge, network
      compute_bridge      Name of interface according to type
      compute_model       Possible values: virtio, rtl8139, ne2k_pci, pcnet, e1000
      start               Boolean (expressed as 0 or 1), whether to start the machine or not

    --compute-attributes:
      cpus                Number of CPUs
      memory              String, amount of memory, value in bytes
      start               Boolean (expressed as 0 or 1), whether to start the machine or not

  openstack:
    --volume:


    --interface:


    --compute-attributes:
      flavor_ref
      image_ref
      tenant_id
      security_groups
      network

  ovirt:
    --volume:
      size_gb             Volume size in GB, integer value
      storage_domain      ID of storage domain
      bootable            Boolean, only one volume can be bootable

    --interface:
      compute_name        Compute name, e.g. eth0
      compute_network     Select one of available networks for a cluster, must be an ID
      compute_interface   Interface type
      start               Boolean (expressed as 0 or 1), whether to start the machine or not

    --compute-attributes:
      cluster             ID of cluster to use
      template            Hardware profile to use
      cores               Integer value, number of cores
      memory              Amount of memory, integer value in bytes

  rackspace:
    --volume:


    --interface:


    --compute-attributes:
      flavor_id
      image_id

  vmware:
    --volume:
      name
      storage_pod         Storage Pod ID from VMware
      datastore           Datastore ID from VMware
      size_gb             Integer number, volume size in GB
      thin                true/false
      eager_zero          true/false
      mode                persistent/independent_persistent/independent_nonpersistent

    --interface:
      compute_type        Type of the network adapter, for example one of:
                            VirtualVmxnet3,
                            VirtualE1000
                          See documentation center for your version of vSphere to find more details about available adapter types:
                            https://www.vmware.com/support/pubs/
      compute_network     Network ID from VMware
      start               Must be a 1 or 0, whether to start the machine or not

    --compute-attributes:
      cpus                  CPU count
      corespersocket        Number of cores per socket (applicable to hardware versions < 10 only)
      memory_mb             Integer number, amount of memory in MB
      firmware              automatic/bios/efi
      cluster               Cluster ID from VMware
      resource_pool         Resource Pool ID from VMware
      path                  Path to folder
      guest_id              Guest OS ID form VMware
      scsi_controller_type  ID of the controller from VMware
      hardware_version      Hardware version ID from VMware
      add_cdrom             Must be a 1 or 0, Add a CD-ROM drive to the virtual machine
      cpuHotAddEnabled      Must be a 1 or 0, lets you add memory resources while the machine is on
      memoryHotAddEnabled   Must be a 1 or 0, lets you add CPU resources while the machine is on
      annotation            Annotation Notes

2.32.5. hammer host delete

ホストを削除します。

Usage:
    hammer host delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Host name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.32.6. hammer host delete-parameter

ホストのパラメーターを削除します。

Usage:
    hammer host delete-parameter [OPTIONS]

Options:
 --host HOST_NAME              Host name
 --host-id HOST_ID
 --name NAME                   Parameter name
 -h, --help                    Print help

2.32.7. hammer host disassociate

ホストの関連付けを解除します。

Usage:
    hammer host disassociate [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Host name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.32.8. hammer host enc-dump

ホストの ENC YAML をダンプします。

Usage:
    hammer host enc-dump [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Host name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.32.9. hammer host errata

お使いのホストに関するエラータを管理します。

Usage:
    hammer host errata [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 apply                         Schedule errata for installation
 info                          Retrieve a single errata for a host
 list                          List errata available for the content host
 recalculate                   Force regenerate applicability.

Options:
 -h, --help                    Print help

Unfortunately the server does not support such operation.

2.32.9.1. hammer host errata apply

エラータのインストールをスケジュールします。

Usage:
    hammer host errata apply [OPTIONS]

Options:
 --async                       Do not wait for the task
 --errata-ids ERRATA_IDS       List of Errata ids to install
                               Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                               JSON is acceptable and preferred way for complex parameters
 --host HOST_NAME              Host name
 --host-id HOST_ID
 --ids IDS                     List of errata ids to perform an action on, (ex: RHSA-2019:1168)
                               Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                               JSON is acceptable and preferred way for complex parameters
 --search SEARCH               Search string for erratum to perform an action on
 -h, --help                    Print help

2.32.9.2. hammer host errata info

ホストに関するエラータを 1 つ取得します。

Usage:
    hammer host errata info [OPTIONS]

Options:
 --host HOST_NAME              Host name
 --host-id HOST_ID
 --id ID                       Errata id of the erratum (RHSA-2012:108)
 --name NAME                   Name to search by
 -h, --help                    Print help

2.32.9.3. hammer host errata list

コンテンツホストに利用可能なエラータを一覧表示します。

Usage:
    hammer host errata list [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME  Content view name to search by
 --content-view-id CONTENT_VIEW_ID Content view numeric identifier
 --environment ENVIRONMENT_NAME    Lifecycle environment name to search by
 --environment-id ENVIRONMENT_ID
 --full-result FULL_RESULT         Whether or not to show all results
                                   One of true/false, yes/no, 1/0.
 --host HOST_NAME                  Host name
 --host-id HOST_ID
 --order ORDER                     Sort field and order, eg. 'id DESC'
 --page PAGE                       Page number, starting at 1
 --per-page PER_PAGE               Number of results per page to return
 --search SEARCH                   Search string
 -h, --help                        Print help

2.32.9.4. hammer host errata recalculate

適用可能なエラータを強制的に再生成します。

Usage:
    hammer host errata recalculate [OPTIONS]

Options:
 --async                       Do not wait for the task
 --host HOST_NAME              Host name
 --host-id HOST_ID
 -h, --help                    Print help

2.32.10. hammer host facts

ファクト値の一覧を表示します。

Usage:
    hammer host facts [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Host name
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  fact                string
  fact_short_name     string
  facts               string
  host                string
  host.hostgroup      string
  host_id             integer
  location            string
  location_id         integer
  name                string
  organization        string
  organization_id     integer
  origin              string
  reported_at         datetime
  short_name          string
  type                string
  value               string

2.32.11. hammer host info

ホストを表示します。

Usage:
    hammer host info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                        Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE                 Location title
 --name NAME                                     Host name
 --organization ORGANIZATION_NAME                Organization name
 --organization-id ORGANIZATION_ID               Organization ID
 --organization-title ORGANIZATION_TITLE         Organization title
 --show-hidden-parameters SHOW_HIDDEN_PARAMETERS Display hidden parameter values
                                                 One of true/false, yes/no, 1/0.
 -h, --help                                      Print help

2.32.12. hammer host interface

ホストのネットワークインターフェースを表示および管理します。

Usage:
    hammer host interface [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 create                        Create an interface on a host
 delete                        Delete a host's interface
 info                          Show an interface for host
 list                          List all interfaces for host
 update                        Update a host's interface

Options:
 -h, --help                    Print help

2.32.12.1. hammer host interface create

ホストにインターフェースを作成します。

Usage:
    hammer host interface create [OPTIONS]

Options:
 --attached-devices ATTACHED_DEVICES     Identifiers of attached interfaces, e.g. `['eth1',
                                         'eth2']`. For bond interfaces those are the slaves. Only for bond
                                         And bridges interfaces.
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --attached-to ATTACHED_TO               Identifier of the interface to which this interface belongs, e.g. eth1.
                                         Only for virtual interfaces.
 --bond-options BOND_OPTIONS             Space separated options, e.g. miimon=100. Only for bond interfaces.
 --compute-attributes COMPUTE_ATTRS      Compute resource specific attributes
                                         Comma-separated list of key=value.
                                         JSON is acceptable and preferred way for complex parameters
 --domain DOMAIN_NAME                    Domain name
 --domain-id DOMAIN_ID                   Numerical ID or domain name
 --host HOST_NAME                        Host name
 --host-id HOST_ID
 --identifier IDENTIFIER                 Device identifier, e.g. eth0 or eth1.1
 --ip IP                                 IPv4 address of interface
 --ip6 IP6                               IPv6 address of interface
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --mac MAC                               MAC address of interface. Required for managed interfaces on bare metal.
 --managed MANAGED                       Should this interface be managed via DHCP and DNS capsule and should it be
                                         Configured during provisioning?
                                         One of true/false, yes/no, 1/0.
 --mode MODE                             Bond mode of the interface, e.g. balance-rr. Only for bond interfaces.
                                         Possible value(s): 'balance-rr', 'active-backup', 'balance-xor', 'broadcast', '802.3ad', 'balance-tlb', 'balance-alb'
 --mtu MTU                               MTU, this attribute has precedence over the subnet MTU.
 --name NAME                             Interface's DNS name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --password PASSWORD                     Only for BMC interfaces.
 --primary                               Should this interface be used for constructing the FQDN of the host? Each managed hosts needs to have one primary interface
 --provider PROVIDER                     Interface provider, e.g. IPMI. Only for BMC interfaces.
                                         Possible value(s): 'IPMI', 'SSH'
 --provision                             Should this interface be used for TFTP of PXELinux (or SSH for image-based hosts)? Each managed hosts needs to have one provision interface
 --subnet SUBNET_NAME                    Subnet name
 --subnet-id SUBNET_ID
 --subnet6-id SUBNET6_ID                 Satellite subnet ID of IPv6 interface
 --tag TAG                               VLAN tag, this attribute has precedence over the subnet VLAN ID. Only for
                                         Virtual interfaces.
 --type TYPE                             Interface type, e.g. bmc. Default is interface
                                         Possible value(s): 'interface', 'bmc', 'bond', 'bridge'
 --username USERNAME                     Only for BMC interfaces.
 --virtual VIRTUAL                       Alias or VLAN device
                                         One of true/false, yes/no, 1/0.
 -h, --help                              Print help

2.32.12.2. hammer host interface delete

ホストのインターフェースを削除します。

Usage:
    hammer host interface delete [OPTIONS]

Options:
 --host HOST_NAME                        Host name
 --host-id HOST_ID
 --id ID                                 ID of interface
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.32.12.3. hammer host interface info

ホストのインターフェースを表示します。

Usage:
    hammer host interface info [OPTIONS]

Options:
 --host HOST_NAME                        Host name
 --host-id HOST_ID
 --id ID                                 ID or name of interface
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.32.12.4. hammer host interface list

ホストのインターフェース一覧を表示します。

Usage:
    hammer host interface list [OPTIONS]

Options:
 --domain DOMAIN_NAME                    Domain name
 --domain-id DOMAIN_ID                   Numerical ID or domain name
 --host HOST_NAME                        Host name
 --host-id HOST_ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --subnet SUBNET_NAME                    Subnet name
 --subnet-id SUBNET_ID
 -h, --help                              Print help

2.32.12.5. hammer host interface update

ホストのインターフェースを更新します。

Usage:
    hammer host interface update [OPTIONS]

Options:
 --attached-devices ATTACHED_DEVICES     Identifiers of attached interfaces, e.g. `['eth1',
                                         'eth2']`. For bond interfaces those are the slaves. Only for bond
                                         And bridges interfaces.
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --attached-to ATTACHED_TO               Identifier of the interface to which this interface belongs, e.g. eth1.
                                         Only for virtual interfaces.
 --bond-options BOND_OPTIONS             Space separated options, e.g. miimon=100. Only for bond interfaces.
 --compute-attributes COMPUTE_ATTRS      Compute resource specific attributes
                                         Comma-separated list of key=value.
                                         JSON is acceptable and preferred way for complex parameters
 --domain DOMAIN_NAME                    Domain name
 --domain-id DOMAIN_ID                   Numerical ID or domain name
 --host HOST_NAME                        Host name
 --host-id HOST_ID
 --id ID                                 ID of interface
 --identifier IDENTIFIER                 Device identifier, e.g. eth0 or eth1.1
 --ip IP                                 IPv4 address of interface
 --ip6 IP6                               IPv6 address of interface
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --mac MAC                               MAC address of interface. Required for managed interfaces on bare metal.
 --managed MANAGED                       Should this interface be managed via DHCP and DNS capsule and should it be
                                         Configured during provisioning?
                                         One of true/false, yes/no, 1/0.
 --mode MODE                             Bond mode of the interface, e.g. balance-rr. Only for bond interfaces.
                                         Possible value(s): 'balance-rr', 'active-backup', 'balance-xor', 'broadcast', '802.3ad', 'balance-tlb', 'balance-alb'
 --mtu MTU                               MTU, this attribute has precedence over the subnet MTU.
 --name NAME                             Interface's DNS name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --password PASSWORD                     Only for BMC interfaces.
 --primary                               Should this interface be used for constructing the FQDN of the host? Each managed hosts needs to have one primary interface
 --provider PROVIDER                     Interface provider, e.g. IPMI. Only for BMC interfaces.
                                         Possible value(s): 'IPMI', 'SSH'
 --provision                             Should this interface be used for TFTP of PXELinux (or SSH for image-based hosts)? Each managed hosts needs to have one provision interface
 --subnet SUBNET_NAME                    Subnet name
 --subnet-id SUBNET_ID
 --subnet6-id SUBNET6_ID                 Satellite subnet ID of IPv6 interface
 --tag TAG                               VLAN tag, this attribute has precedence over the subnet VLAN ID. Only for
                                         Virtual interfaces.
 --type TYPE                             Interface type, e.g. bmc. Default is interface
                                         Possible value(s): 'interface', 'bmc', 'bond', 'bridge'
 --username USERNAME                     Only for BMC interfaces.
 --virtual VIRTUAL                       Alias or VLAN device
                                         One of true/false, yes/no, 1/0.
 -h, --help                              Print help

2.32.13. hammer host list

ホストを一覧表示します。

Usage:
    hammer host list [OPTIONS]

Options:
 --environment ENVIRONMENT_NAME                Environment name (--environment is deprecated: Use --puppet-environment instead)
 --environment-id ENVIRONMENT_ID               (--environment-id is deprecated: Use --puppet-environment-id instead)
 --hostgroup HOSTGROUP_NAME                    Hostgroup name
 --hostgroup-id HOSTGROUP_ID
 --hostgroup-title HOSTGROUP_TITLE             Hostgroup title
 --location LOCATION_NAME                      Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE               Location title
 --order ORDER                                 Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME              Organization name
 --organization-id ORGANIZATION_ID             Organization ID
 --organization-title ORGANIZATION_TITLE       Organization title
 --page PAGE                                   Paginate results
 --per-page PER_PAGE                           Number of entries per request
 --puppet-environment PUPPET_ENVIRONMENT_NAME  Puppet environment name
 --puppet-environment-id PUPPET_ENVIRONMENT_ID
 --search SEARCH                               Filter results
 --thin THIN                                   Only list ID and name of hosts
                                               One of true/false, yes/no, 1/0.
 -h, --help                                    Print help

Search / Order fields:
  activation_key            string
  activation_key_id         string
  addon                     text
  addons_status             Values: mismatched, matched, not_specified
  ansible_role              string
  applicable_errata         string
  applicable_rpms           string
  architecture              string
  autoheal                  boolean
  build                     Values: true, false
  class                     string
  comment                   text
  compute_resource          string
  compute_resource_id       integer
  config_group              string
  content_source            string
  content_view              string
  content_view_id           integer
  domain                    string
  domain_id                 integer
  environment               string
  errata_status             Values: security_needed, errata_needed, updated, unknown
  execution_status          Values: ok, error
  facts                     string
  global_status             Values: ok, warning, error
  has_ip                    string
  has_mac                   string
  hostgroup                 string
  hostgroup_fullname        string
  hostgroup_id              integer
  hostgroup_name            string
  hostgroup_title           string
  hypervisor                Values: true, false
  hypervisor_host           string
  image                     string
  installable_errata        string
  installed_at              datetime
  ip                        string
  job_invocation.id         string
  job_invocation.result     Values: cancelled, failed, pending, success
  last_checkin              datetime
  last_report               datetime
  lifecycle_environment     string
  lifecycle_environment_id  integer
  location                  string
  location_id               integer
  mac                       string
  managed                   Values: true, false
  model                     string
  name                      string
  organization              string
  organization_id           integer
  origin                    string
  os                        string
  os_description            string
  os_id                     integer
  os_major                  string
  os_minor                  string
  os_title                  string
  owner                     string
  owner_id                  integer
  owner_type                string
  params                    string
  params_name               string
  parent_hostgroup          string
  puppet_ca                 string
  puppet_proxy_id           integer
  puppetmaster              string
  purpose_status            Values: mismatched, matched, not_specified
  realm                     string
  realm_id                  integer
  registered_at             datetime
  registered_through        string
  release_version           string
  role                      text
  role_status               Values: mismatched, matched, not_specified
  service_level             string
  sla_status                Values: mismatched, matched, not_specified
  smart_proxy               string
  status.applied            integer
  status.enabled            Values: true, false
  status.failed             integer
  status.failed_restarts    integer
  status.interesting        Values: true, false
  status.pending            integer
  status.restarted          integer
  status.skipped            integer
  subnet                    string
  subnet.name               text
  subnet6                   string
  subnet6.name              text
  subscription_id           string
  subscription_name         string
  subscription_status       Values: valid, partial, invalid, unknown, unsubscribed_hypervisor
  subscription_uuid         string
  trace_status              Values: reboot_needed, process_restart_needed, updated
  upgradable_rpms           string
  usage                     text
  usage_status              Values: mismatched, matched, not_specified
  user.firstname            string
  user.lastname             string
  user.login                string
  user.mail                 string
  usergroup                 string
  usergroup.name            string
  uuid                      string

2.32.14. hammer host package

お使いのホストのパッケージを管理します。

Usage:
    hammer host package [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 install                       Install packages remotely
 list                          List packages installed on the host
 remove                        Uninstall packages remotely
 upgrade                       Update packages remotely
 upgrade-all                   Update packages remotely

Options:
 -h, --help                    Print help

Unfortunately the server does not support such operation.

2.32.14.1. hammer host package install

パッケージをリモートからインストールします。

Usage:
    hammer host package install [OPTIONS]

Options:
 --async                       Do not wait for the task
 --host HOST_NAME              Host name
 --host-id HOST_ID
 --packages PACKAGES           List of package names
                               Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                               JSON is acceptable and preferred way for complex parameters
 -h, --help                    Print help

2.32.14.2. hammer host package list

ホストにインストールされているパッケージの一覧を表示します。

Usage:
    hammer host package list [OPTIONS]

Options:
 --full-result FULL_RESULT     Whether or not to show all results
                               One of true/false, yes/no, 1/0.
 --host HOST_NAME              Host name
 --host-id HOST_ID
 --order ORDER                 Sort field and order, eg. 'id DESC'
 --page PAGE                   Page number, starting at 1
 --per-page PER_PAGE           Number of results per page to return
 --search SEARCH               Search string
 -h, --help                    Print help

2.32.14.3. hammer host package remove

パッケージをリモートからアンインストールします。

Usage:
    hammer host package remove [OPTIONS]

Options:
 --async                       Do not wait for the task
 --host HOST_NAME              Host name
 --host-id HOST_ID
 --packages PACKAGES           List of package names
                               Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                               JSON is acceptable and preferred way for complex parameters
 -h, --help                    Print help

2.32.14.4. hammer host package upgrade

パッケージをリモートから更新します。

Usage:
    hammer host package upgrade [OPTIONS]

Options:
 --async                       Do not wait for the task
 --host HOST_NAME              Host name
 --host-id HOST_ID
 --packages PACKAGES           List of packages names
                               Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                               JSON is acceptable and preferred way for complex parameters
 -h, --help                    Print help

2.32.14.5. hammer host package upgrade-all

パッケージをリモートから更新します。

Usage:
    hammer host package upgrade-all [OPTIONS]

Options:
 --async                       Do not wait for the task
 --host HOST_NAME              Host name
 --host-id HOST_ID
 -h, --help                    Print help

2.32.15. hammer host package-group

お使いのホストのパッケージグループを管理します。

Usage:
    hammer host package-group [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 install                       Install packages remotely
 remove                        Uninstall packages remotely

Options:
 -h, --help                    Print help

Unfortunately the server does not support such operation.

2.32.15.1. hammer host package-group install

パッケージをリモートからインストールします。

Usage:
    hammer host package-group install [OPTIONS]

Options:
 --async                       Do not wait for the task
 --groups GROUPS               List of package group names
                               Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                               JSON is acceptable and preferred way for complex parameters
 --host HOST_NAME              Host name
 --host-id HOST_ID
 -h, --help                    Print help

2.32.15.2. hammer host package-group remove

パッケージをリモートからアンインストールします。

Usage:
    hammer host package-group remove [OPTIONS]

Options:
 --async                       Do not wait for the task
 --groups GROUPS               List of package group names
                               Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                               JSON is acceptable and preferred way for complex parameters
 --host HOST_NAME              Host name
 --host-id HOST_ID
 -h, --help                    Print help

2.32.16. hammer host puppet-classes

Puppet クラスの一覧を表示します。

Usage:
    hammer host puppet-classes [OPTIONS]

Options:
 --host HOST_NAME                  Host name
 --host-id HOST_ID
 --location-id LOCATION_ID         Scope by locations
 --order ORDER                     Sort field and order, eg. ‘id DESC’
 --organization-id ORGANIZATION_ID Scope by organizations
 --page PAGE                       Paginate results
 --per-page PER_PAGE               Number of entries per request
 --search SEARCH                   Filter results
 -h, --help                        Print help

Search / Order fields:
  config_group        string
  environment         string
  host                string
  hostgroup           string
  key                 string
  location            string
  name                string
  organization        string

2.32.17. hammer host puppetrun

ホストで Puppet エージェントを強制的に実行します。

Usage:
    hammer host puppetrun [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.32.18. hammer host reboot

ホストを再起動します。

Usage:
    hammer host reboot [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Host name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.32.19. hammer host rebuild-config

ホスト向けオーケストレーション関連設定を再ビルドします。

Usage:
    hammer host rebuild-config [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Host name
 --only ONLY                             Limit rebuild steps, valid steps are DHCP, DNS, TFTP
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.32.20. hammer host reports

レポートの一覧を表示します。

Usage:
    hammer host reports [OPTIONS]

Options:
 --id ID                                 Host id
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Host name
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  applied             integer
  environment         string
  eventful            Values: true, false
  failed              integer
  failed_restarts     integer
  host                string
  host_id             integer
  hostgroup           string
  hostgroup_fullname  string
  hostgroup_title     string
  last_report         datetime
  location            string
  log                 text
  organization        string
  origin              string
  pending             integer
  reported            datetime
  resource            text
  restarted           integer
  skipped             integer

2.32.21. hammer host reset

ホストをリセットします。

Usage:
    hammer host reset [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Host name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.32.22. hammer host sc-params

スマートクラスパラメーターの一覧を表示します。

Usage:
    hammer host sc-params [OPTIONS]

Options:
 --host HOST_NAME                        Host name
 --host-id HOST_ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 --show-hidden SHOW_HIDDEN               Display hidden values
                                         One of true/false, yes/no, 1/0.
 -h, --help                              Print help

Search / Order fields:
  avoid_duplicates    Values: true, false
  environment         string
  key                 string
  merge_default       Values: true, false
  merge_overrides     Values: true, false
  override            Values: true, false
  parameter           string
  puppetclass         string
  puppetclass_name    string

2.32.23. hammer host set-parameter

ホストのパラメーターを作成または追加します。

Usage:
    hammer host set-parameter [OPTIONS]

Options:
 --hidden-value HIDDEN_VALUE     Should the value be hidden
                                 One of true/false, yes/no, 1/0.
 --host HOST_NAME                Host name
 --host-id HOST_ID
 --name NAME                     Parameter name
 --parameter-type PARAMETER_TYPE Type of the parameter
                                 Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json'
                                 Default: "string"
 --value VALUE                   Parameter value
 -h, --help                      Print help

2.32.24. hammer host smart-variables

スマート変数の一覧を表示します。

Usage:
    hammer host smart-variables [OPTIONS]

Options:
 --host HOST_NAME                        Host name
 --host-id HOST_ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 --show-hidden SHOW_HIDDEN               Display hidden values
                                         One of true/false, yes/no, 1/0.
 -h, --help                              Print help

Search / Order fields:
  avoid_duplicates    Values: true, false
  key                 string
  merge_default       Values: true, false
  merge_overrides     Values: true, false
  override            Values: true, false
  parameter           string
  puppetclass         string

2.32.25. hammer host start

ホストのパワーをオンにします。

Usage:
    hammer host start [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Host name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.32.26. hammer host status

ホストの設定ステータスを取得します。

Usage:
    hammer host status [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Host name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.32.27. hammer host stop

ホストのパワーをオフにします。

Usage:
    hammer host stop [OPTIONS]

Options:
 --force                                 Force turning off a host
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Host name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.32.28. hammer host subscription

お使いのホストのサブスクリプション情報を管理します。

Usage:
    hammer host subscription [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 attach                        Add a subscription to a host
 auto-attach                   Trigger an auto-attach of subscriptions
 content-override              Override product content defaults
 product-content               List associated products
 register                      Register a host with subscription and information
 remove
 unregister                    Unregister the host as a subscription consumer

Options:
 -h, --help                    Print help

Unfortunately the server does not support such operation.

2.32.28.1. hammer host subscription attach

ホストにサブスクリプションを追加します。

Usage:
    hammer host subscription attach [OPTIONS]

Options:
 --host HOST_NAME                  Host name
 --host-id HOST_ID
 --quantity Quantity               Quantity of this subscriptions to add. Defaults to 1
 --subscription-id SUBSCRIPTION_ID ID of subscription
 -h, --help                        Print help

2.32.28.2. hammer host subscription auto-attach

サブスクリプションの自動割り当てをトリガーします。

Usage:
    hammer host subscription auto-attach [OPTIONS]

Options:
 --host HOST_NAME              Host name
 --host-id HOST_ID
 -h, --help                    Print help

2.32.28.3. hammer host subscription content-override

製品コンテンツのデフォルトを上書きします。

Usage:
    hammer host subscription content-override [OPTIONS]

Options:
 --content-label CONTENT_LABEL Label of the content
 --host HOST_NAME              Host name
 --host-id HOST_ID
 --override-name OVERRIDE_NAME Override parameter key or name.
                               To enable or disable a repo select 'enabled'.
                               Default value: enabled
                               Default: "enabled"
 --remove                      Remove a content override
 --value VALUE                 Override value. Note for repo enablement you can use a boolean value
 -h, --help                    Print help

2.32.28.4. hammer host subscription product-content

関連付けられた製品を一覧表示します。

Usage:
    hammer host subscription product-content [OPTIONS]

Options:
 --content-access-mode-all CONTENT_ACCESS_MODE_ALL Get all content available, not just that provided by subscriptions
                                                   One of true/false, yes/no, 1/0.
 --content-access-mode-env CONTENT_ACCESS_MODE_ENV Limit content to just that available in the host's content view version
                                                   One of true/false, yes/no, 1/0.
 --host HOST_NAME                                  Host name
 --host-id HOST_ID
 -h, --help                                        Print help

2.32.28.5. hammer host subscription register

サブスクリプションと情報を使用してホストを登録します。

Usage:
    hammer host subscription register [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME                    Content view name to search by
 --content-view-id CONTENT_VIEW_ID                   Content view numeric identifier
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
 --environment-id ENVIRONMENT_ID                     (--environment-id is deprecated: Use --lifecycle-environment-id instead)
 --hypervisor-guest-uuids HYPERVISOR_GUEST_UUIDS     UUIDs of the virtual guests from the host's hypervisor
                                                     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                     JSON is acceptable and preferred way for complex parameters
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME  Lifecycle environment name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID ID of the environment
 --name NAME                                         Name of the host
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID to search by
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 --release-version RELEASE_VERSION                   Release version of the content host
 --service-level SERVICE_LEVEL                       A service level for auto-healing process, e.g. SELF-SUPPORT
 --uuid UUID                                         UUID to use for registered host, random uuid is generated if not provided
 -h, --help                                          Print help

2.32.28.6. hammer host subscription remove

Usage:
    hammer host subscription remove [OPTIONS]

Options:
 --host HOST_NAME                  Host name
 --host-id HOST_ID
 --quantity Quantity               Remove the first instance of a subscription with matching id and quantity
 --subscription-id SUBSCRIPTION_ID ID of subscription
 -h, --help                        Print help

2.32.28.7. hammer host subscription unregister

ホストからサブスクリプションの登録を解除します。

Usage:
    hammer host subscription unregister [OPTIONS]

Options:
 --host HOST_NAME              Host name
 --host-id HOST_ID
 -h, --help                    Print help

2.32.29. hammer host update

ホストを更新します。

Usage:
    hammer host update [OPTIONS]

Options:
 --ansible-role-ids ANSIBLE_ROLE_IDS                           IDs of associated ansible roles
                                                               Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                               JSON is acceptable and preferred way for complex parameters
 --ansible-roles ANSIBLE_ROLE_NAMES                            Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                               JSON is acceptable and preferred way for complex parameters
 --architecture ARCHITECTURE_NAME                              Architecture name
 --architecture-id ARCHITECTURE_ID
 --ask-root-password ASK_ROOT_PW                               One of true/false, yes/no, 1/0.
 --autoheal AUTOHEAL                                           Sets whether the Host will autoheal subscriptions upon checkin
                                                               One of true/false, yes/no, 1/0.
 --build BUILD                                                 One of true/false, yes/no, 1/0.
 --comment COMMENT                                             Additional information about this host
 --compute-attributes COMPUTE_ATTRS                            Compute resource attributes
                                                               Comma-separated list of key=value.
                                                               JSON is acceptable and preferred way for complex parameters
 --compute-profile COMPUTE_PROFILE_NAME                        Compute profile name
 --compute-profile-id COMPUTE_PROFILE_ID
 --compute-resource COMPUTE_RESOURCE_NAME                      Compute resource name
 --compute-resource-id COMPUTE_RESOURCE_ID
 --config-group-ids CONFIG_GROUP_IDS                           IDs of associated config groups
                                                               Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                               JSON is acceptable and preferred way for complex parameters
 --config-groups CONFIG_GROUP_NAMES                            Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                               JSON is acceptable and preferred way for complex parameters
 --content-source CONTENT_SOURCE_NAME                          Content Source name
 --content-source-id CONTENT_SOURCE_ID
 --content-view CONTENT_VIEW_NAME                              Name to search by
 --content-view-id CONTENT_VIEW_ID                             Content view numeric identifier
 --domain DOMAIN_NAME                                          Domain name
 --domain-id DOMAIN_ID                                         Numerical ID or domain name
 --enabled ENABLED                                             Include this host within Satellite reporting
                                                               One of true/false, yes/no, 1/0.
 --environment ENVIRONMENT_NAME                                Environment name (--environment is deprecated: Use --puppet-environment instead)
 --environment-id ENVIRONMENT_ID                               (--environment-id is deprecated: Use --puppet-environment-id instead)
 --hostgroup HOSTGROUP_NAME                                    Hostgroup name
 --hostgroup-id HOSTGROUP_ID
 --hostgroup-title HOSTGROUP_TITLE                             Hostgroup title
 --hypervisor-guest-uuids HYPERVISOR_GUEST_UUIDS               List of hypervisor guest uuids
                                                               Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                               JSON is acceptable and preferred way for complex parameters
 --id ID
 --image IMAGE_NAME                                            Name to search by
 --image-id IMAGE_ID
 --installed-products-attributes INSTALLED_PRODUCTS_ATTRIBUTES List of products installed on the host
                                                               Comma separated list of values defined by a schema. See Option details section below.
                                                               JSON is acceptable and preferred way for complex parameters
 --interface INTERFACE                                         Interface parameters
                                                               Comma-separated list of key=value.
                                                               JSON is acceptable and preferred way for complex parameters
                                                               Can be specified multiple times.
 --ip IP                                                       Not required if using a subnet with DHCP Capsule
 --kickstart-repository REPOSITORY_NAME                        Kickstart repository name
 --kickstart-repository-id KICKSTART_REPOSITORY_ID             Repository Id associated with the kickstart repo used for provisioning
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME            Name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID           ID of the environment
 --location LOCATION_NAME                                      Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE                               Location title
 --mac MAC                                                     Required for managed host that is bare metal, not required if it's a
                                                               Virtual machine
 --managed MANAGED                                             True/False flag whether a host is managed or unmanaged. Note: this value
                                                               Also determines whether several parameters are required or not
                                                               One of true/false, yes/no, 1/0.
 --medium MEDIUM_NAME                                          Medium name
 --medium-id MEDIUM_ID
 --model MODEL_NAME                                            Model name
 --model-id MODEL_ID
 --name NAME                                                   Host name
 --new-location NEW_LOCATION_NAME                              Location name
 --new-location-id NEW_LOCATION_ID
 --new-location-title NEW_LOCATION_TITLE                       Location title
 --new-name NEW_NAME
 --new-organization NEW_ORGANIZATION_NAME                      Organization name
 --new-organization-id NEW_ORGANIZATION_ID                     Organization ID
 --new-organization-title NEW_ORGANIZATION_TITLE               Organization title
 --openscap-proxy-id OPENSCAP_PROXY_ID                         ID of OpenSCAP Capsule
 --operatingsystem OPERATINGSYSTEM_TITLE                       Operating system title
 --operatingsystem-id OPERATINGSYSTEM_ID
 --organization ORGANIZATION_NAME                              Organization name
 --organization-id ORGANIZATION_ID                             Organization ID
 --organization-title ORGANIZATION_TITLE                       Organization title
 --overwrite OVERWRITE                                         One of true/false, yes/no, 1/0.
 --owner OWNER_LOGIN                                           Login of the owner
 --owner-id OWNER_ID                                           ID of the owner
 --owner-type OWNER_TYPE                                       Host's owner type
                                                               Possible value(s): 'User', 'Usergroup'
 --parameters PARAMS                                           Replaces with new host parameters
                                                               Comma-separated list of key=value.
                                                               JSON is acceptable and preferred way for complex parameters
 --partition-table PARTITION_TABLE_NAME                        Partition table name
 --partition-table-id PARTITION_TABLE_ID
 --product PRODUCT_NAME                                        Name to search by
 --product-id PRODUCT_ID                                       Product numeric identifier
 --progress-report-id PROGRESS_REPORT_ID                       UUID to track orchestration tasks status, GET
                                                               /api/orchestration/:UUID/tasks
 --provision-method PROVISION_METHOD                           The method used to provision the host.
                                                               Possible value(s): 'build', 'image', 'bootdisk'
 --puppet-ca-proxy PUPPET_CA_PROXY_NAME
 --puppet-ca-proxy-id PUPPET_CA_PROXY_ID                       Puppet CA Capsule ID
 --puppet-class-ids PUPPET_CLASS_IDS                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                               JSON is acceptable and preferred way for complex parameters
 --puppet-classes PUPPET_CLASS_NAMES                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                               JSON is acceptable and preferred way for complex parameters
 --puppet-environment PUPPET_ENVIRONMENT_NAME                  Puppet environment name
 --puppet-environment-id PUPPET_ENVIRONMENT_ID
 --puppet-proxy PUPPET_PROXY_NAME
 --puppet-proxy-id PUPPET_PROXY_ID                             Puppet Capsule ID
 --purpose-addons PURPOSE_ADDONS                               Sets the system add-ons
                                                               Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                               JSON is acceptable and preferred way for complex parameters
 --purpose-role PURPOSE_ROLE                                   Sets the system purpose usage
 --purpose-usage PURPOSE_USAGE                                 Sets the system purpose usage
 --pxe-loader PXE_LOADER                                       DHCP filename option (Grub2/PXELinux by default)
                                                               Possible value(s): 'None', 'PXELinux BIOS', 'PXELinux UEFI', 'Grub UEFI', 'Grub2 BIOS', 'Grub2 ELF', 'Grub2 UEFI', 'Grub2 UEFI SecureBoot', 'iPXE Embedded', 'iPXE Chain BIOS', 'iPXE Chain UEFI'
 --realm REALM_NAME                                            Name to search by
 --realm-id REALM_ID                                           Numerical ID or realm name
 --release-version RELEASE_VERSION                             Release version for this Host to use (7Server, 7.1, etc)
 --root-password ROOT_PW                                       Required if host is managed and value is not inherited from host group or default password in settings
 --service-level SERVICE_LEVEL                                 Service level to be used for autoheal
 --subnet SUBNET_NAME                                          Subnet name
 --subnet-id SUBNET_ID
 --volume VOLUME                                               Volume parameters
                                                               Comma-separated list of key=value.
                                                               JSON is acceptable and preferred way for complex parameters
                                                               Can be specified multiple times.
 -h, --help                                                    Print help

Option details:
  Following parameters accept format defined by its schema (bold are required):

  --installed-products-attributes  "product_id=string\,product_name=string\,arch=string\,version=string, ... "

Available keys for --interface:
  mac
  ip
  type                Possible values: interface, bmc, bond, bridge
  name
  subnet_id
  domain_id
  identifier
  managed             true/false
  primary             true/false, each managed hosts needs to have one primary interface.
  provision           true/false
  virtual             true/false

  For virtual=true:
    tag                 VLAN tag, this attribute has precedence over the subnet VLAN ID. Only for virtual interfaces.
    attached_to         Identifier of the interface to which this interface belongs, e.g. eth1.

  For type=bond:
    mode                Possible values: balance-rr, active-backup, balance-xor, broadcast, 802.3ad, balance-tlb, balance-alb
    attached_devices    Identifiers of slave interfaces, e.g. [eth1,eth2]
    bond_options

  For type=bmc:
    provider            always IPMI
    username
    password

Provider specific options:
  ec2:
    --volume:


    --interface:


    --compute-attributes:
      flavor_id
      image_id
      availability_zone
      security_group_ids
      managed_ip

  gce:
    --volume:


    --interface:


    --compute-attributes:
      machine_type
      image_id
      network
      external_ip

  libvirt:
    --volume:
      pool_name           One of available storage pools
      capacity            String value, eg. 10G
      format_type         Possible values: raw, qcow2

    --interface:
      compute_type        Possible values: bridge, network
      compute_bridge      Name of interface according to type
      compute_model       Possible values: virtio, rtl8139, ne2k_pci, pcnet, e1000
      start               Boolean (expressed as 0 or 1), whether to start the machine or not

    --compute-attributes:
      cpus                Number of CPUs
      memory              String, amount of memory, value in bytes
      start               Boolean (expressed as 0 or 1), whether to start the machine or not

  openstack:
    --volume:


    --interface:


    --compute-attributes:
      flavor_ref
      image_ref
      tenant_id
      security_groups
      network

  ovirt:
    --volume:
      size_gb             Volume size in GB, integer value
      storage_domain      ID of storage domain
      bootable            Boolean, only one volume can be bootable

    --interface:
      compute_name        Compute name, e.g. eth0
      compute_network     Select one of available networks for a cluster, must be an ID
      compute_interface   Interface type
      start               Boolean (expressed as 0 or 1), whether to start the machine or not

    --compute-attributes:
      cluster             ID of cluster to use
      template            Hardware profile to use
      cores               Integer value, number of cores
      memory              Amount of memory, integer value in bytes

  rackspace:
    --volume:


    --interface:


    --compute-attributes:
      flavor_id
      image_id

  vmware:
    --volume:
      name
      storage_pod         Storage Pod ID from VMware
      datastore           Datastore ID from VMware
      size_gb             Integer number, volume size in GB
      thin                true/false
      eager_zero          true/false
      mode                persistent/independent_persistent/independent_nonpersistent

    --interface:
      compute_type        Type of the network adapter, for example one of:
                            VirtualVmxnet3,
                            VirtualE1000
                          See documentation center for your version of vSphere to find more details about available adapter types:
                            https://www.vmware.com/support/pubs/
      compute_network     Network ID from VMware
      start               Must be a 1 or 0, whether to start the machine or not

    --compute-attributes:
      cpus                  CPU count
      corespersocket        Number of cores per socket (applicable to hardware versions < 10 only)
      memory_mb             Integer number, amount of memory in MB
      firmware              automatic/bios/efi
      cluster               Cluster ID from VMware
      resource_pool         Resource Pool ID from VMware
      path                  Path to folder
      guest_id              Guest OS ID form VMware
      scsi_controller_type  ID of the controller from VMware
      hardware_version      Hardware version ID from VMware
      add_cdrom             Must be a 1 or 0, Add a CD-ROM drive to the virtual machine
      cpuHotAddEnabled      Must be a 1 or 0, lets you add memory resources while the machine is on
      memoryHotAddEnabled   Must be a 1 or 0, lets you add CPU resources while the machine is on
      annotation            Annotation Notes

2.33. hammer host-collection

ホストコレクションを操作します。

Usage:
    hammer host-collection [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 add-host                      Add host to the host collection
 copy                          Copy a host collection
 create                        Create a host collection
 delete                        Destroy a host collection
 erratum                       Manipulate errata for a host collection
 hosts                         List all hosts
 info                          Show a host collection
 list                          List host collections
 package                       Manipulate packages for a host collection
 package-group                 Manipulate package-groups for a host collection
 remove-host                   Remove hosts from the host collection
 update                        Update a host collection

Options:
 -h, --help                    Print help

2.33.1. hammer host-collection add-host

ホストをホストコレクションに追加します。

Usage:
    hammer host-collection add-host [OPTIONS]

Options:
 --host-ids HOST_IDS                     Array of host ids
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --hosts HOST_NAMES                      Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --id ID                                 Id of the host collection
 --name NAME                             Host collection name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.33.2. hammer host-collection copy

ホストコレクションをコピーします。

Usage:
    hammer host-collection copy [OPTIONS]

Options:
 --id ID                                 ID of the host collection
 --name NAME                             Host collection name to search by
 --new-name NEW_NAME                     New host collection name
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.33.3. hammer host-collection create

ホストコレクションを作成します。

Usage:
    hammer host-collection create [OPTIONS]

Options:
 --description DESCRIPTION
 --host-ids HOST_IDS                     List of host ids to replace the hosts in host collection
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --hosts HOST_NAMES                      Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --max-hosts MAX_HOSTS                   Maximum number of hosts in the host collection
 --name NAME                             Host Collection name
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --unlimited-hosts UNLIMITED_HOSTS       Whether or not the host collection may have unlimited hosts
                                         One of true/false, yes/no, 1/0.
 -h, --help                              Print help

2.33.4. hammer host-collection delete

ホストコレクションを破棄します。

Usage:
    hammer host-collection delete [OPTIONS]

Options:
 --id ID                                 Id of the host collection
 --name NAME                             Host collection name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.33.5. hammer host-collection erratum

ホストコレクションのエラータを操作します。

Usage:
    hammer host-collection erratum [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 install                       Install errata on content hosts contained within a host collection

Options:
 -h, --help                    Print help

Unfortunately the server does not support such operation.

2.33.5.1. hammer host-collection erratum install

ホストコレクション内に含まれるコンテンツホストにエラータをインストールします。

Usage:
    hammer host-collection erratum install [OPTIONS]

Options:
 --errata ERRATA                         List of Errata to install
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --id HOST_COLLECTION_ID                 Host Collection ID
 --name HOST_COLLECTION_NAME             Host Collection Name
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.33.6. hammer host-collection hosts

ホストを一覧表示します。

Usage:
    hammer host-collection hosts [OPTIONS]

Options:
 --environment ENVIRONMENT_NAME          Lifecycle environment name to search by
 --environment-id ENVIRONMENT_ID
 --hostgroup HOSTGROUP_NAME              Hostgroup name
 --hostgroup-id HOSTGROUP_ID
 --hostgroup-title HOSTGROUP_TITLE       Hostgroup title
 --id HOST_COLLECTION_ID                 Host Collection ID
 --include INCLUDE                       Array of extra information types to include
                                         Possible value(s): 'parameters', 'all_parameters'
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name HOST_COLLECTION_NAME             Host Collection Name
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 --thin THIN                             Only list ID and name of hosts
                                         One of true/false, yes/no, 1/0.
 -h, --help                              Print help

Search / Order fields:
  activation_key            string
  activation_key_id         string
  addon                     text
  addons_status             Values: mismatched, matched, not_specified
  ansible_role              string
  applicable_errata         string
  applicable_rpms           string
  architecture              string
  autoheal                  boolean
  build                     Values: true, false
  class                     string
  comment                   text
  compute_resource          string
  compute_resource_id       integer
  config_group              string
  content_source            string
  content_view              string
  content_view_id           integer
  domain                    string
  domain_id                 integer
  environment               string
  errata_status             Values: security_needed, errata_needed, updated, unknown
  execution_status          Values: ok, error
  facts                     string
  global_status             Values: ok, warning, error
  has_ip                    string
  has_mac                   string
  hostgroup                 string
  hostgroup_fullname        string
  hostgroup_id              integer
  hostgroup_name            string
  hostgroup_title           string
  hypervisor                Values: true, false
  hypervisor_host           string
  image                     string
  installable_errata        string
  installed_at              datetime
  ip                        string
  job_invocation.id         string
  job_invocation.result     Values: cancelled, failed, pending, success
  last_checkin              datetime
  last_report               datetime
  lifecycle_environment     string
  lifecycle_environment_id  integer
  location                  string
  location_id               integer
  mac                       string
  managed                   Values: true, false
  model                     string
  name                      string
  organization              string
  organization_id           integer
  origin                    string
  os                        string
  os_description            string
  os_id                     integer
  os_major                  string
  os_minor                  string
  os_title                  string
  owner                     string
  owner_id                  integer
  owner_type                string
  params                    string
  params_name               string
  parent_hostgroup          string
  puppet_ca                 string
  puppet_proxy_id           integer
  puppetmaster              string
  purpose_status            Values: mismatched, matched, not_specified
  realm                     string
  realm_id                  integer
  registered_at             datetime
  registered_through        string
  release_version           string
  role                      text
  role_status               Values: mismatched, matched, not_specified
  service_level             string
  sla_status                Values: mismatched, matched, not_specified
  smart_proxy               string
  status.applied            integer
  status.enabled            Values: true, false
  status.failed             integer
  status.failed_restarts    integer
  status.interesting        Values: true, false
  status.pending            integer
  status.restarted          integer
  status.skipped            integer
  subnet                    string
  subnet.name               text
  subnet6                   string
  subnet6.name              text
  subscription_id           string
  subscription_name         string
  subscription_status       Values: valid, partial, invalid, unknown, unsubscribed_hypervisor
  subscription_uuid         string
  trace_status              Values: reboot_needed, process_restart_needed, updated
  upgradable_rpms           string
  usage                     text
  usage_status              Values: mismatched, matched, not_specified
  user.firstname            string
  user.lastname             string
  user.login                string
  user.mail                 string
  usergroup                 string
  usergroup.name            string
  uuid                      string

2.33.7. hammer host-collection info

ホストコレクションを表示します。

Usage:
    hammer host-collection info [OPTIONS]

Options:
 --id ID                                 Id of the host collection
 --name NAME                             Host collection name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.33.8. hammer host-collection list

ホストコレクションの一覧を表示します。

Usage:
    hammer host-collection list [OPTIONS]

Options:
 --activation-key ACTIVATION_KEY_NAME    Activation key name to search by
 --activation-key-id ACTIVATION_KEY_ID   ID of the activation key
 --available-for AVAILABLE_FOR           Interpret specified object to return only Host Collections that can be
                                         Associated with specified object. The value 'host' is supported.
 --full-result FULL_RESULT               Whether or not to show all results
                                         One of true/false, yes/no, 1/0.
 --host HOST_NAME                        Host name
 --host-id HOST_ID
 --name NAME                             Host collection name to filter by
 --order ORDER                           Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --page PAGE                             Page number, starting at 1
 --per-page PER_PAGE                     Number of results per page to return
 --search SEARCH                         Search string
 -h, --help                              Print help

2.33.9. hammer host-collection package

ホストコレクションのパッケージを操作します。

Usage:
    hammer host-collection package [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 install                       Install packages on content hosts contained within a host collection
 remove                        Remove packages on content hosts contained within a host collection
 update                        Update packages on content hosts contained within a host collection

Options:
 -h, --help                    Print help

Unfortunately the server does not support such operation.

2.33.9.1. hammer host-collection package install

ホストコレクションに含まれるコンテンツホストにパッケージをインストールします。

Usage:
    hammer host-collection package install [OPTIONS]

Options:
 --id HOST_COLLECTION_ID                 Host Collection ID
 --name HOST_COLLECTION_NAME             Host Collection Name
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --packages PACKAGES                     Comma-separated list of packages to install
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 -h, --help                              Print help

2.33.9.2. hammer host-collection package remove

ホストコレクションに含まれるコンテンツホストでパッケージを削除します。

Usage:
    hammer host-collection package remove [OPTIONS]

Options:
 --id HOST_COLLECTION_ID                 Host Collection ID
 --name HOST_COLLECTION_NAME             Host Collection Name
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --packages PACKAGES                     Comma-separated list of packages to install
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 -h, --help                              Print help

2.33.9.3. hammer host-collection package update

ホストコレクションに含まれるコンテンツホストでパッケージを更新します。

Usage:
    hammer host-collection package update [OPTIONS]

Options:
 --id HOST_COLLECTION_ID                 Host Collection ID
 --name HOST_COLLECTION_NAME             Host Collection Name
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --packages PACKAGES                     Comma-separated list of packages to install
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 -h, --help                              Print help

2.33.10. hammer host-collection package-group

ホストコレクションのパッケージグループを操作します。

Usage:
    hammer host-collection package-group [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 install                       Install package-groups on content hosts contained within a host collection
 remove                        Remove package-groups on content hosts contained within a host collection
 update                        Update package-groups on content hosts contained within a host collection

Options:
 -h, --help                    Print help

Unfortunately the server does not support such operation.

2.33.10.1. hammer host-collection package-group install

ホストコレクションに含まれるコンテンツホストにパッケージグループをインストールします。

Usage:
    hammer host-collection package-group install [OPTIONS]

Options:
 --id HOST_COLLECTION_ID                 Host Collection ID
 --name HOST_COLLECTION_NAME             Host Collection Name
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --package-groups PACKAGE-GROUPS         Comma-separated list of package-groups to install
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 -h, --help                              Print help

2.33.10.2. hammer host-collection package-group remove

ホストコレクションに含まれるコンテンツホストでパッケージグループを削除します。

Usage:
    hammer host-collection package-group remove [OPTIONS]

Options:
 --id HOST_COLLECTION_ID                 Host Collection ID
 --name HOST_COLLECTION_NAME             Host Collection Name
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --package-groups PACKAGE-GROUPS         Comma-separated list of package-groups to install
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 -h, --help                              Print help

2.33.10.3. hammer host-collection package-group update

ホストコレクションに含まれるコンテンツホストでパッケージグループを更新します。

Usage:
    hammer host-collection package-group update [OPTIONS]

Options:
 --id HOST_COLLECTION_ID                 Host Collection ID
 --name HOST_COLLECTION_NAME             Host Collection Name
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --package-groups PACKAGE-GROUPS         Comma-separated list of package-groups to install
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 -h, --help                              Print help

2.33.11. hammer host-collection remove-host

ホストコレクションからホストを削除します。

Usage:
    hammer host-collection remove-host [OPTIONS]

Options:
 --host-ids HOST_IDS                     Array of host ids
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --hosts HOST_NAMES                      Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --id ID                                 Id of the host collection
 --name NAME                             Host collection name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.33.12. hammer host-collection update

ホストコレクションを更新します。

Usage:
    hammer host-collection update [OPTIONS]

Options:
 --description DESCRIPTION
 --host-ids HOST_IDS                     List of host ids to replace the hosts in host collection
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --hosts HOST_NAMES                      Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --id ID                                 Id of the host collection
 --max-hosts MAX_HOSTS                   Maximum number of hosts in the host collection
 --name NAME                             Host collection name to search by
 --new-name NEW_NAME                     Host Collection name
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --unlimited-hosts UNLIMITED_HOSTS       Whether or not the host collection may have unlimited hosts
                                         One of true/false, yes/no, 1/0.
 -h, --help                              Print help

2.34. hammer hostgroup

ホストグループを操作します。

Usage:
    hammer hostgroup [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 ansible-roles                 Manage Ansible roles on a hostgroup
 create                        Create a host group
 delete                        Delete a host group
 delete-parameter              Delete parameter for a hostgroup
 info                          Show a host group
 list                          List all host groups
 puppet-classes                List all Puppet classes
 rebuild-config                Rebuild orchestration config
 sc-params                     List all smart class parameters
 set-parameter                 Create or update parameter for a hostgroup
 smart-variables               List all smart variables
 update                        Update a host group

Options:
 -h, --help                    Print help

2.34.1. hammer hostgroup ansible-roles

ホストグループで Ansible ロールを実行します。

Usage:
    hammer hostgroup ansible-roles [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 assign                        Assigns Ansible roles to a hostgroup
 list                          List all Ansible roles for a hostgroup
 play                          Plays Ansible roles on a hostgroup

Options:
 -h, --help                    Print help

2.34.1.1. hammer hostgroup ansible-roles assign

Ansible ロールをホストグループに割り当てます。

Usage:
    hammer hostgroup ansible-roles assign [OPTIONS]

Options:
 --ansible-role-ids ANSIBLE_ROLE_IDS     Ansible roles to assign to a hostgroup
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --ansible-roles ANSIBLE_ROLE_NAMES      Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Hostgroup name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --title TITLE                           Hostgroup title
 -h, --help                              Print help

2.34.1.2. hammer hostgroup ansible-roles list

ホストグループの Ansible ロールをすべて一覧表示します。

Usage:
    hammer hostgroup ansible-roles list [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Hostgroup name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --title TITLE                           Hostgroup title
 -h, --help                              Print help

2.34.1.3. hammer hostgroup ansible-roles play

ホストグループで Ansible ロールをプレイします。

Usage:
    hammer hostgroup ansible-roles play [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Hostgroup name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --title TITLE                           Hostgroup title
 -h, --help                              Print help

2.34.2. hammer hostgroup create

ホストグループを作成します。

Usage:
    hammer hostgroup create [OPTIONS]

Options:
 --ansible-role-ids ANSIBLE_ROLE_IDS                       IDs of associated ansible roles
                                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --ansible-roles ANSIBLE_ROLE_NAMES                        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --architecture ARCHITECTURE_NAME                          Architecture name
 --architecture-id ARCHITECTURE_ID
 --ask-root-pass ASK_ROOT_PW                               One of true/false, yes/no, 1/0.
 --compute-profile COMPUTE_PROFILE_NAME                    Compute profile name
 --compute-profile-id COMPUTE_PROFILE_ID
 --compute-resource COMPUTE_RESOURCE_NAME                  Compute resource name
 --compute-resource-id COMPUTE_RESOURCE_ID
 --config-group-ids CONFIG_GROUP_IDS                       IDs of associated config groups
                                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --config-groups CONFIG_GROUP_NAMES                        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --content-source CONTENT_SOURCE_NAME                      Content Source name
 --content-source-id CONTENT_SOURCE_ID                     Content source ID
 --content-view CONTENT_VIEW_NAME                          Name to search by
 --content-view-id CONTENT_VIEW_ID                         Content view numeric identifier
 --description DESCRIPTION                                 Host group description
 --domain DOMAIN_NAME                                      Domain name
 --domain-id DOMAIN_ID                                     Numerical ID or domain name
 --environment ENVIRONMENT_NAME                            Environment name (--environment is deprecated: Use --puppet-environment instead)
 --environment-id ENVIRONMENT_ID                           (--environment-id is deprecated: Use --puppet-environment-id instead)
 --group-parameters-attributes GROUP_PARAMETERS_ATTRIBUTES Array of parameters
                                                           Comma separated list of values defined by a schema. See Option details section below.
                                                           JSON is acceptable and preferred way for complex parameters
 --kickstart-repository REPOSITORY_NAME                    Kickstart repository name
 --kickstart-repository-id KICKSTART_REPOSITORY_ID         Kickstart repository ID
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME        Name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID       ID of the environment
 --location LOCATION_NAME                                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS                               REPLACE locations with given ids
                                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE                           Location title
 --location-titles LOCATION_TITLES                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --medium MEDIUM_NAME                                      Medium name
 --medium-id MEDIUM_ID
 --name NAME                                               Name of the host group
 --openscap-proxy-id OPENSCAP_PROXY_ID                     ID of OpenSCAP Capsule
 --operatingsystem OPERATINGSYSTEM_TITLE                   Operating system title
 --operatingsystem-id OPERATINGSYSTEM_ID
 --organization ORGANIZATION_NAME                          Organization name
 --organization-id ORGANIZATION_ID                         Organization ID
 --organization-ids ORGANIZATION_IDS                       REPLACE organizations with given ids.
                                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE                   Organization title
 --organization-titles ORGANIZATION_TITLES                 Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES                        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --parent PARENT_NAME                                      Name of parent hostgroup
 --parent-id PARENT_ID                                     Parent ID of the host group
 --partition-table PARTITION_TABLE_NAME                    Partition table name
 --partition-table-id PARTITION_TABLE_ID
 --puppet-ca-proxy PUPPET_CA_PROXY_NAME                    Name of puppet CA proxy
 --puppet-ca-proxy-id PUPPET_CA_PROXY_ID                   Puppet CA Capsule ID
 --puppet-class-ids PUPPETCLASS_IDS                        List of puppetclass ids
                                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --puppet-classes PUPPET_CLASS_NAMES                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --puppet-environment PUPPET_ENVIRONMENT_NAME              Puppet environment name
 --puppet-environment-id PUPPET_ENVIRONMENT_ID
 --puppet-proxy PUPPET_PROXY_NAME                          Name of puppet proxy
 --puppet-proxy-id PUPPET_PROXY_ID                         Puppet Capsule ID
 --pxe-loader PXE_LOADER                                   DHCP filename option (Grub2/PXELinux by default)
                                                           Possible value(s): 'None', 'PXELinux BIOS', 'PXELinux UEFI', 'Grub UEFI', 'Grub2 BIOS', 'Grub2 ELF', 'Grub2 UEFI', 'Grub2 UEFI SecureBoot', 'iPXE Embedded', 'iPXE Chain BIOS', 'iPXE Chain UEFI'
 --query-organization ORGANIZATION_NAME                    Organization name to search by
 --query-organization-id ORGANIZATION_ID                   Organization ID to search by
 --query-organization-label ORGANIZATION_LABEL             Organization label to search by
 --realm REALM_NAME                                        Name to search by
 --realm-id REALM_ID                                       Numerical ID or realm name
 --root-pass ROOT_PASSWORD                                 Root password
 --subnet SUBNET_NAME                                      Subnet name
 --subnet-id SUBNET_ID
 --subnet6 SUBNET6_NAME                                    Subnet IPv6 name
 --subnet6-id SUBNET6_ID                                   Subnet IPv6 ID
 -h, --help                                                Print help

Option details:
  Following parameters accept format defined by its schema (bold are required):

  --group-parameters-attributes  "name=string\,value=string, ... "

2.34.3. hammer hostgroup delete

ホストグループを削除します。

Usage:
    hammer hostgroup delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Hostgroup name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --title TITLE                           Hostgroup title
 -h, --help                              Print help

2.34.4. hammer hostgroup delete-parameter

ホストグループのパラメーターを削除します。

Usage:
    hammer hostgroup delete-parameter [OPTIONS]

Options:
 --hostgroup HOSTGROUP_NAME        Hostgroup name
 --hostgroup-id HOSTGROUP_ID
 --hostgroup-title HOSTGROUP_TITLE Hostgroup title
 --name NAME                       Parameter name
 -h, --help                        Print help

2.34.5. hammer hostgroup info

ホストグループを表示します。

Usage:
    hammer hostgroup info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                        Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE                 Location title
 --name NAME                                     Hostgroup name
 --organization ORGANIZATION_NAME                Organization name
 --organization-id ORGANIZATION_ID               Organization ID
 --organization-title ORGANIZATION_TITLE         Organization title
 --show-hidden-parameters SHOW_HIDDEN_PARAMETERS Display hidden parameter values
                                                 One of true/false, yes/no, 1/0.
 --title TITLE                                   Hostgroup title
 -h, --help                                      Print help

2.34.6. hammer hostgroup list

ホストグループの一覧を表示します。

Usage:
    hammer hostgroup list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --puppet-class PUPPET_CLASS_NAME        Puppet class name
 --puppet-class-id PUPPET_CLASS_ID       ID of Puppet class
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  architecture        string
  class               string
  config_group        string
  environment         string
  host                string
  id                  integer
  label               string
  location            string
  location_id         integer
  medium              string
  name                string
  organization        string
  organization_id     integer
  os                  string
  os_description      string
  os_id               integer
  os_major            string
  os_minor            string
  os_title            string
  params              text
  template            string
  title               string

2.34.7. hammer hostgroup puppet-classes

Puppet クラスの一覧を表示します。

Usage:
    hammer hostgroup puppet-classes [OPTIONS]

Options:
 --hostgroup HOSTGROUP_NAME        Hostgroup name
 --hostgroup-id HOSTGROUP_ID
 --hostgroup-title HOSTGROUP_TITLE Hostgroup title
 --location-id LOCATION_ID         Scope by locations
 --order ORDER                     Sort field and order, eg. ‘id DESC’
 --organization-id ORGANIZATION_ID Scope by organizations
 --page PAGE                       Paginate results
 --per-page PER_PAGE               Number of entries per request
 --search SEARCH                   Filter results
 -h, --help                        Print help

Search / Order fields:
  config_group        string
  environment         string
  host                string
  hostgroup           string
  key                 string
  location            string
  name                string
  organization        string

2.34.8. hammer hostgroup rebuild-config

オーケストレーション設定を再構築します。

Usage:
    hammer hostgroup rebuild-config [OPTIONS]

Options:
 --children-hosts CHILDREN_HOSTS         Operate on child hostgroup hosts
                                         One of true/false, yes/no, 1/0.
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Hostgroup name
 --only ONLY                             Limit rebuild steps, valid steps are DHCP, DNS, TFTP
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --title TITLE                           Hostgroup title
 -h, --help                              Print help

2.34.9. hammer hostgroup sc-params

スマートクラスパラメーターの一覧を表示します。

Usage:
    hammer hostgroup sc-params [OPTIONS]

Options:
 --hostgroup HOSTGROUP_NAME              Hostgroup name
 --hostgroup-id HOSTGROUP_ID
 --hostgroup-title HOSTGROUP_TITLE       Hostgroup title
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 --show-hidden SHOW_HIDDEN               Display hidden values
                                         One of true/false, yes/no, 1/0.
 -h, --help                              Print help

Search / Order fields:
  avoid_duplicates    Values: true, false
  environment         string
  key                 string
  merge_default       Values: true, false
  merge_overrides     Values: true, false
  override            Values: true, false
  parameter           string
  puppetclass         string
  puppetclass_name    string

2.34.10. hammer hostgroup set-parameter

ホストグループのパラメーターを作成または更新します。

Usage:
    hammer hostgroup set-parameter [OPTIONS]

Options:
 --hidden-value HIDDEN_VALUE       Should the value be hidden
                                   One of true/false, yes/no, 1/0.
 --hostgroup HOSTGROUP_NAME        Hostgroup name
 --hostgroup-id HOSTGROUP_ID
 --hostgroup-title HOSTGROUP_TITLE Hostgroup title
 --name NAME                       Parameter name
 --parameter-type PARAMETER_TYPE   Type of the parameter
                                   Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json'
                                   Default: "string"
 --value VALUE                     Parameter value
 -h, --help                        Print help

2.34.11. hammer hostgroup smart-variables

スマート変数の一覧を表示します。

Usage:
    hammer hostgroup smart-variables [OPTIONS]

Options:
 --hostgroup HOSTGROUP_NAME              Hostgroup name
 --hostgroup-id HOSTGROUP_ID
 --hostgroup-title HOSTGROUP_TITLE       Hostgroup title
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 --show-hidden SHOW_HIDDEN               Display hidden values
                                         One of true/false, yes/no, 1/0.
 -h, --help                              Print help

Search / Order fields:
  avoid_duplicates    Values: true, false
  key                 string
  merge_default       Values: true, false
  merge_overrides     Values: true, false
  override            Values: true, false
  parameter           string
  puppetclass         string

2.34.12. hammer hostgroup update

ホストグループを更新します。

Usage:
    hammer hostgroup update [OPTIONS]

Options:
 --ansible-role-ids ANSIBLE_ROLE_IDS                       IDs of associated ansible roles
                                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --ansible-roles ANSIBLE_ROLE_NAMES                        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --architecture ARCHITECTURE_NAME                          Architecture name
 --architecture-id ARCHITECTURE_ID
 --ask-root-pass ASK_ROOT_PW                               One of true/false, yes/no, 1/0.
 --compute-profile COMPUTE_PROFILE_NAME                    Compute profile name
 --compute-profile-id COMPUTE_PROFILE_ID
 --compute-resource COMPUTE_RESOURCE_NAME                  Compute resource name
 --compute-resource-id COMPUTE_RESOURCE_ID
 --config-group-ids CONFIG_GROUP_IDS                       IDs of associated config groups
                                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --config-groups CONFIG_GROUP_NAMES                        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --content-source CONTENT_SOURCE_NAME                      Content Source name
 --content-source-id CONTENT_SOURCE_ID                     Content source ID
 --content-view CONTENT_VIEW_NAME                          Name to search by
 --content-view-id CONTENT_VIEW_ID                         Content view numeric identifier
 --description DESCRIPTION                                 Host group description
 --domain DOMAIN_NAME                                      Domain name
 --domain-id DOMAIN_ID                                     Numerical ID or domain name
 --environment ENVIRONMENT_NAME                            Environment name (--environment is deprecated: Use --puppet-environment instead)
 --environment-id ENVIRONMENT_ID                           (--environment-id is deprecated: Use --puppet-environment-id instead)
 --group-parameters-attributes GROUP_PARAMETERS_ATTRIBUTES Array of parameters
                                                           Comma separated list of values defined by a schema. See Option details section below.
                                                           JSON is acceptable and preferred way for complex parameters
 --id ID
 --kickstart-repository REPOSITORY_NAME                    Kickstart repository name
 --kickstart-repository-id KICKSTART_REPOSITORY_ID         Kickstart repository ID
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME        Name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID       ID of the environment
 --location LOCATION_NAME                                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS                               REPLACE locations with given ids
                                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE                           Location title
 --location-titles LOCATION_TITLES                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --medium MEDIUM_NAME                                      Medium name
 --medium-id MEDIUM_ID
 --name NAME                                               Hostgroup name
 --new-name NEW_NAME                                       Name of the host group
 --openscap-proxy-id OPENSCAP_PROXY_ID                     ID of OpenSCAP Capsule
 --operatingsystem OPERATINGSYSTEM_TITLE                   Operating system title
 --operatingsystem-id OPERATINGSYSTEM_ID
 --organization ORGANIZATION_NAME                          Organization name
 --organization-id ORGANIZATION_ID                         Organization ID
 --organization-ids ORGANIZATION_IDS                       REPLACE organizations with given ids.
                                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE                   Organization title
 --organization-titles ORGANIZATION_TITLES                 Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES                        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --parent PARENT_NAME                                      Name of parent hostgroup
 --parent-id PARENT_ID                                     Parent ID of the host group
 --partition-table PARTITION_TABLE_NAME                    Partition table name
 --partition-table-id PARTITION_TABLE_ID
 --puppet-ca-proxy PUPPET_CA_PROXY_NAME                    Name of puppet CA proxy
 --puppet-ca-proxy-id PUPPET_CA_PROXY_ID                   Puppet CA Capsule ID
 --puppet-class-ids PUPPETCLASS_IDS                        List of puppetclass ids
                                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --puppet-classes PUPPET_CLASS_NAMES                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --puppet-environment PUPPET_ENVIRONMENT_NAME              Puppet environment name
 --puppet-environment-id PUPPET_ENVIRONMENT_ID
 --puppet-proxy PUPPET_PROXY_NAME                          Name of puppet proxy
 --puppet-proxy-id PUPPET_PROXY_ID                         Puppet Capsule ID
 --pxe-loader PXE_LOADER                                   DHCP filename option (Grub2/PXELinux by default)
                                                           Possible value(s): 'None', 'PXELinux BIOS', 'PXELinux UEFI', 'Grub UEFI', 'Grub2 BIOS', 'Grub2 ELF', 'Grub2 UEFI', 'Grub2 UEFI SecureBoot', 'iPXE Embedded', 'iPXE Chain BIOS', 'iPXE Chain UEFI'
 --query-organization ORGANIZATION_NAME                    Organization name to search by
 --query-organization-id ORGANIZATION_ID                   Organization ID to search by
 --query-organization-label ORGANIZATION_LABEL             Organization label to search by
 --realm REALM_NAME                                        Name to search by
 --realm-id REALM_ID                                       Numerical ID or realm name
 --root-pass ROOT_PASSWORD                                 Root password
 --subnet SUBNET_NAME                                      Subnet name
 --subnet-id SUBNET_ID
 --subnet6 SUBNET6_NAME                                    Subnet IPv6 name
 --subnet6-id SUBNET6_ID                                   Subnet IPv6 ID
 --title TITLE                                             Hostgroup title
 -h, --help                                                Print help

Option details:
  Following parameters accept format defined by its schema (bold are required):

  --group-parameters-attributes  "name=string\,value=string, ... "

2.35. hammer import-templates

テンプレートを git repo またはサーバー上のディレクトリーからインポートします。

Usage:
    hammer import-templates [OPTIONS]

Options:
 --associate ASSOCIATE                     Associate to OS's, Locations & Organizations. Options are: always,
                                           New or never.
                                           Possible value(s): 'always', 'new', 'never'
 --branch BRANCH                           Branch in Git repo.
 --dirname DIRNAME                         The directory within Git repo containing the templates
 --filter FILTER                           Export templates with names matching this regex (case-insensitive; snippets
                                           Are not filtered).
 --force FORCE                             Update templates that are locked
                                           One of true/false, yes/no, 1/0.
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --lock LOCK                               Lock imported templates
                                           One of true/false, yes/no, 1/0.
 --negate NEGATE                           Negate the prefix (for purging).
                                           One of true/false, yes/no, 1/0.
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --prefix PREFIX                           The string all imported templates should begin with.
 --repo REPO                               Override the default repo from settings.
 --verbose VERBOSE                         Show template diff in response
                                           One of true/false, yes/no, 1/0.
 -h, --help                                Print help

2.36. hammer job-invocation

ジョブ呼び出しを管理します。

Usage:
    hammer job-invocation [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 cancel                        Cancel the job
 create                        Create a job invocation
 info                          Show job invocation
 list                          List job invocations
 output                        View the output for a host
 rerun                         Rerun the job

Options:
 -h, --help                    Print help

2.36.1. hammer job-invocation cancel

ジョブをキャンセルします。

Usage:
    hammer job-invocation cancel [OPTIONS]

Options:
 --force FORCE                     One of true/false, yes/no, 1/0.
 --id ID
 --location-id LOCATION_ID         Scope by locations
 --organization-id ORGANIZATION_ID Scope by organizations
 -h, --help                        Print help

2.36.2. hammer job-invocation create

ジョブ呼び出しを作成します。

Usage:
    hammer job-invocation create [OPTIONS]

Options:
 --async                                                 Do not wait for the task
 --bookmark BOOKMARK_NAME                                Name to search by
 --bookmark-id BOOKMARK_ID
 --concurrency-level CONCURRENCY_LEVEL                   Run at most N tasks at a time
 --cron-line CRONLINE                                    Create a recurring execution
                                                         Cron line format 'a b c d e', where:
                                                           a. is minute (range: 0-59)
                                                           b. is hour (range: 0-23)
                                                           c. is day of month (range: 1-31)
                                                           d. is month (range: 1-12)
                                                           e. is day of week (range: 0-6)
 --description-format DESCRIPTION_FORMAT                 Override the description format from the template for this invocation only
 --dynamic                                               Dynamic search queries are evaluated at run time
 --effective-user EFFECTIVE_USER                         What user should be used to run the script (using sudo-like mechanisms).
                                                         Defaults to a template parameter or global setting.
 --end-time DATETIME                                     Perform no more executions after this time, used with --cron-line
                                                         Date and time in YYYY-MM-DD HH:MM:SS or ISO 8601 format
 --execution-timeout-interval EXECUTION_TIMEOUT_INTERVAL Override the timeout interval from the template for this invocation only
 --feature FEATURE                                       Remote execution feature label that should be triggered, job template
                                                         Assigned to this feature will be used
 --input-files INPUT FILES                               Read input values from files
                                                         Comma-separated list of key=file, where file is a path to a text file to be read
 --inputs INPUTS                                         Specify inputs from command line
                                                         Comma-separated list of key=value.
                                                         JSON is acceptable and preferred way for complex parameters
 --job-template JOB_TEMPLATE_NAME                        Name to search by
 --job-template-id JOB_TEMPLATE_ID
 --location LOCATION_NAME                                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE                         Location title
 --max-iteration MAX_ITERATION                           Repeat a maximum of N times
 --organization ORGANIZATION_NAME                        Organization name
 --organization-id ORGANIZATION_ID                       Organization ID
 --organization-title ORGANIZATION_TITLE                 Organization title
 --search-query SEARCH_QUERY
 --start-at DATETIME                                     Schedule the execution for a later time
                                                         Date and time in YYYY-MM-DD HH:MM:SS or ISO 8601 format
 --start-before DATETIME                                 Execution should be cancelled if it cannot be started before --start-at
                                                         Date and time in YYYY-MM-DD HH:MM:SS or ISO 8601 format
 --time-span TIME_SPAN                                   Distribute tasks over N seconds
 -h, --help                                              Print help

2.36.3. hammer job-invocation info

ジョブ呼び出しを表示します。

Usage:
    hammer job-invocation info [OPTIONS]

Options:
 --id ID
 --location-id LOCATION_ID         Scope by locations
 --organization-id ORGANIZATION_ID Scope by organizations
 -h, --help                        Print help

2.36.4. hammer job-invocation list

ジョブ呼び出しの一覧を表示します。

Usage:
    hammer job-invocation list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

2.36.5. hammer job-invocation output

ホストの出力を表示します。

Usage:
    hammer job-invocation output [OPTIONS]

Options:
 --async                                 Do not wait for job to complete, shows current output only
 --host HOST_NAME                        Host name
 --host-id HOST_ID
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.36.6. hammer job-invocation rerun

ジョブを再実行します。

Usage:
    hammer job-invocation rerun [OPTIONS]

Options:
 --failed-only FAILED_ONLY         One of true/false, yes/no, 1/0.
 --id ID
 --location-id LOCATION_ID         Scope by locations
 --organization-id ORGANIZATION_ID Scope by organizations
 -h, --help                        Print help

2.37. hammer job-template

ジョブテンプレートを管理します。

Usage:
    hammer job-template [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 create                        Create a job template
 delete                        Delete a job template
 dump                          View job template content
 export                        Export a template including all metadata
 import                        Import a job template from ERB
 info                          Show job template details
 list                          List job templates
 update                        Update a job template

Options:
 -h, --help                    Print help

2.37.1. hammer job-template create

ジョブテンプレートを作成します。

Usage:
    hammer job-template create [OPTIONS]

Options:
 --audit-comment AUDIT_COMMENT
 --current-user CURRENT_USER               Whether the current user login should be used as the effective user
                                           One of true/false, yes/no, 1/0.
 --description-format DESCRIPTION_FORMAT   This template is used to generate the description. Input values can be used
                                           Using the syntax %{package}. You may also include the job category and
                                           Template name using %{job_category} and %{template_name}.
 --file TEMPLATE                           Path to a file that contains the template
 --job-category JOB_CATEGORY               Job category
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locked LOCKED                           Whether or not the template is locked for editing
                                           One of true/false, yes/no, 1/0.
 --name NAME                               Template name
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --overridable OVERRIDABLE                 Whether it should be allowed to override the effective user from the
                                           Invocation form.
                                           One of true/false, yes/no, 1/0.
 --provider-type PROVIDER_TYPE             Provider type
                                           Possible value(s): 'SSH', 'Ansible'
 --snippet SNIPPET                         One of true/false, yes/no, 1/0.
 --value VALUE                             What user should be used to run the script (using sudo-like mechanisms)
 -h, --help                                Print help

2.37.2. hammer job-template delete

ジョブテンプレートを削除します。

Usage:
    hammer job-template delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.37.3. hammer job-template dump

ジョブテンプレートコンテンツを表示します。

Usage:
    hammer job-template dump [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.37.4. hammer job-template export

すべてのメターデータを含むテンプレートをエクスポートします。

Usage:
    hammer job-template export [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.37.5. hammer job-template import

ERB からジョブテンプレートをインポートします。

Usage:
    hammer job-template import [OPTIONS]

Options:
 --file TEMPLATE                         Path to a file that contains the template - must include ERB metadata
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --overwrite OVERWRITE                   Overwrite template if it already exists
                                         One of true/false, yes/no, 1/0.
 -h, --help                              Print help

2.37.6. hammer job-template info

ジョブテンプレートの詳細を表示します。

Usage:
    hammer job-template info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.37.7. hammer job-template list

ジョブテンプレートの一覧を表示します。

Usage:
    hammer job-template list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

2.37.8. hammer job-template update

ジョブテンプレートを更新します。

Usage:
    hammer job-template update [OPTIONS]

Options:
 --audit-comment AUDIT_COMMENT
 --current-user CURRENT_USER               Whether the current user login should be used as the effective user
                                           One of true/false, yes/no, 1/0.
 --description-format DESCRIPTION_FORMAT   This template is used to generate the description. Input values can be used
                                           Using the syntax %{package}. You may also include the job category and
                                           Template name using %{job_category} and %{template_name}.
 --file TEMPLATE                           Path to a file that contains the template
 --id ID
 --job-category JOB_CATEGORY               Job category
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locked LOCKED                           Whether or not the template is locked for editing
                                           One of true/false, yes/no, 1/0.
 --name NAME                               Name to search by
 --new-name NEW_NAME                       Template name
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --overridable OVERRIDABLE                 Whether it should be allowed to override the effective user from the
                                           Invocation form.
                                           One of true/false, yes/no, 1/0.
 --provider-type PROVIDER_TYPE             Provider type
                                           Possible value(s): 'SSH', 'Ansible'
 --snippet SNIPPET                         One of true/false, yes/no, 1/0.
 --value VALUE                             What user should be used to run the script (using sudo-like mechanisms)
 -h, --help                                Print help

2.38. hammer lifecycle-environment

サーバーで lifecycle_environments を操作します。

Usage:
    hammer lifecycle-environment [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 create                        Create an environment
 delete                        Destroy an environment
 info                          Show an environment
 list                          List environments in an organization
 paths                         List environment paths
 update                        Update an environment

Options:
 -h, --help                    Print help

2.38.1. hammer lifecycle-environment create

環境を作成します。

Usage:
    hammer lifecycle-environment create [OPTIONS]

Options:
 --description DESCRIPTION                                     Description of the environment
 --label LABEL                                                 Label of the environment
 --name NAME                                                   Name of the environment
 --organization ORGANIZATION_NAME                              Organization name to search by
 --organization-id ORGANIZATION_ID                             Organization ID
 --organization-label ORGANIZATION_LABEL                       Organization label to search by
 --prior PRIOR                                                 Name of the prior environment
 --prior-id PRIOR_ID                                           ID of an environment that is prior to the new environment in the chain. It
                                                               Has to be either the ID of Library or the ID of an environment at the end
                                                               Of a chain.
 --registry-name-pattern REGISTRY_NAME_PATTERN                 Pattern for container image names
 --registry-unauthenticated-pull REGISTRY_UNAUTHENTICATED_PULL Allow unauthenticed pull of container images
                                                               One of true/false, yes/no, 1/0.
 -h, --help                                                    Print help

2.38.2. hammer lifecycle-environment delete

環境を破棄します。

Usage:
    hammer lifecycle-environment delete [OPTIONS]

Options:
 --id ID                                 ID of the environment
 --name NAME                             Lifecycle environment name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.38.3. hammer lifecycle-environment info

環境を表示します。

Usage:
    hammer lifecycle-environment info [OPTIONS]

Options:
 --id ID                                 ID of the environment
 --name NAME                             Lifecycle environment name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.38.4. hammer lifecycle-environment list

組織の環境の一覧を表示します。

Usage:
    hammer lifecycle-environment list [OPTIONS]

Options:
 --full-result FULL_RESULT               Whether or not to show all results
                                         One of true/false, yes/no, 1/0.
 --library LIBRARY                       Set true if you want to see only library environments
                                         Possible value(s): 'true', 'false'
 --name NAME                             Filter only environments containing this name
 --order ORDER                           Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --page PAGE                             Page number, starting at 1
 --per-page PER_PAGE                     Number of results per page to return
 --search SEARCH                         Search string
 -h, --help                              Print help

2.38.5. hammer lifecycle-environment paths

環境パスの一覧を表示します。

Usage:
    hammer lifecycle-environment paths [OPTIONS]

Options:
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --permission-type PERMISSION_TYPE       The associated permission type. One of (readable | promotable) Default:
                                         Readable
 -h, --help                              Print help

2.38.6. hammer lifecycle-environment update

環境を更新します。

Usage:
    hammer lifecycle-environment update [OPTIONS]

Options:
 --async ASYNC                                                 Do not wait for the update action to finish. Default: true
                                                               One of true/false, yes/no, 1/0.
 --description DESCRIPTION                                     Description of the environment
 --id ID                                                       ID of the environment
 --name NAME                                                   Lifecycle environment name to search by
 --new-name NEW_NAME                                           New name to be given to the environment
 --organization ORGANIZATION_NAME                              Organization name to search by
 --organization-id ORGANIZATION_ID                             Organization ID
 --organization-label ORGANIZATION_LABEL                       Organization label to search by
 --registry-name-pattern REGISTRY_NAME_PATTERN                 Pattern for container image names
 --registry-unauthenticated-pull REGISTRY_UNAUTHENTICATED_PULL Allow unauthenticed pull of container images
                                                               One of true/false, yes/no, 1/0.
 -h, --help                                                    Print help

2.39. hammer location

ロケーションを操作します。

Usage:
    hammer location [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 add-compute-resource          Associate a compute resource
 add-config-template           Associate a configuration template
 add-domain                    Associate a domain
 add-environment               Associate a Puppet environment
 add-hostgroup                 Associate a hostgroup
 add-medium                    Associate a medium
 add-organization              Associate an organization
 add-smart-proxy               Associate a smart proxy
 add-subnet                    Associate a subnet
 add-user                      Associate an user
 create                        Create a location
 delete                        Delete a location
 delete-parameter              Delete parameter for a location
 info                          Show a location
 list                          List all locations
 remove-compute-resource       Disassociate a compute resource
 remove-config-template        Disassociate a configuration template
 remove-domain                 Disassociate a domain
 remove-environment            Disassociate a Puppet environment
 remove-hostgroup              Disassociate a hostgroup
 remove-medium                 Disassociate a medium
 remove-organization           Disassociate an organization
 remove-smart-proxy            Disassociate a smart proxy
 remove-subnet                 Disassociate a subnet
 remove-user                   Disassociate an user
 set-parameter                 Create or update parameter for a location
 update                        Update a location

Options:
 -h, --help                    Print help

2.39.1. hammer location add-compute-resource

コンピュートリソースを関連付けます。

Usage:
    hammer location add-compute-resource [OPTIONS]

Options:
 --compute-resource COMPUTE_RESOURCE_NAME  Compute resource name
 --compute-resource-id COMPUTE_RESOURCE_ID
 --id ID
 --name NAME                               Location name
 --title TITLE                             Location title
 -h, --help                                Print help

2.39.2. hammer location add-config-template

設定テンプレートを関連付けます。

Usage:
    hammer location add-config-template [OPTIONS]

Options:
 --config-template CONFIG_TEMPLATE_NAME  Name to search by
 --config-template-id CONFIG_TEMPLATE_ID
 --id ID
 --name NAME                             Location name
 --title TITLE                           Location title
 -h, --help                              Print help

2.39.3. hammer location add-domain

ドメインを関連付けます。

Usage:
    hammer location add-domain [OPTIONS]

Options:
 --domain DOMAIN_NAME          Domain name
 --domain-id DOMAIN_ID         Numerical ID or domain name
 --id ID
 --name NAME                   Location name
 --title TITLE                 Location title
 -h, --help                    Print help

2.39.4. hammer location add-environment

Puppet 環境を関連付けます。

Usage:
    hammer location add-environment [OPTIONS]

Options:
 --environment ENVIRONMENT_NAME                Environment name (--environment is deprecated: Use --puppet-environment instead)
 --environment-id ENVIRONMENT_ID               (--environment-id is deprecated: Use --puppet-environment-id instead)
 --id ID
 --name NAME                                   Location name
 --puppet-environment PUPPET_ENVIRONMENT_NAME  Puppet environment name
 --puppet-environment-id PUPPET_ENVIRONMENT_ID
 --title TITLE                                 Location title
 -h, --help                                    Print help

2.39.5. hammer location add-hostgroup

ホストグループを関連付けます。

Usage:
    hammer location add-hostgroup [OPTIONS]

Options:
 --hostgroup HOSTGROUP_NAME        Hostgroup name
 --hostgroup-id HOSTGROUP_ID
 --hostgroup-title HOSTGROUP_TITLE Hostgroup title
 --id ID
 --name NAME                       Location name
 --title TITLE                     Location title
 -h, --help                        Print help

2.39.6. hammer location add-medium

メディアを関連付けます。

Usage:
    hammer location add-medium [OPTIONS]

Options:
 --id ID
 --medium MEDIUM_NAME          Medium name
 --medium-id MEDIUM_ID
 --name NAME                   Location name
 --title TITLE                 Location title
 -h, --help                    Print help

2.39.7. hammer location add-organization

組織を関連付けます。

Usage:
    hammer location add-organization [OPTIONS]

Options:
 --id ID
 --name NAME                             Location name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --title TITLE                           Location title
 -h, --help                              Print help

2.39.8. hammer location add-smart-proxy

スマートプロキシーを関連付けます。

Usage:
    hammer location add-smart-proxy [OPTIONS]

Options:
 --id ID
 --name NAME                     Location name
 --smart-proxy SMART_PROXY_NAME  Name to search by
 --smart-proxy-id SMART_PROXY_ID
 --title TITLE                   Location title
 -h, --help                      Print help

2.39.9. hammer location add-subnet

サブネットを関連付けます。

Usage:
    hammer location add-subnet [OPTIONS]

Options:
 --id ID
 --name NAME                   Location name
 --subnet SUBNET_NAME          Subnet name
 --subnet-id SUBNET_ID
 --title TITLE                 Location title
 -h, --help                    Print help

2.39.10. hammer location add-user

ユーザーを関連付けます。

Usage:
    hammer location add-user [OPTIONS]

Options:
 --id ID
 --name NAME                   Location name
 --title TITLE                 Location title
 --user USER_LOGIN             User's login to search by
 --user-id USER_ID
 -h, --help                    Print help

2.39.11. hammer location create

ロケーションを作成します。

Usage:
    hammer location create [OPTIONS]

Options:
 --compute-resource-ids COMPUTE_RESOURCE_IDS           Compute resource IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --compute-resources COMPUTE_RESOURCE_NAMES            Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --config-template-ids CONFIG_TEMPLATE_IDS             Provisioning template IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --config-templates CONFIG_TEMPLATE_NAMES              Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --description DESCRIPTION
 --domain-ids DOMAIN_IDS                               Domain IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --domains DOMAIN_NAMES                                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --environment-ids ENVIRONMENT_IDS                     Environment IDs (--environment-ids is deprecated: Use --puppet-environment-ids instead)
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --environments ENVIRONMENT_NAMES                      (--environments is deprecated: Use --puppet-environments instead)
 --hostgroup-ids HOSTGROUP_IDS                         Host group IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --hostgroup-titles HOSTGROUP_TITLES                   Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --hostgroups HOSTGROUP_NAMES                          Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --ignore-types IGNORE_TYPES                           List of resources types that will be automatically associated
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --location LOCATION_NAME                              Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE                       Location title
 --media MEDIUM_NAMES                                  Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --medium-ids MEDIUM_IDS                               Medium IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --name NAME
 --organization ORGANIZATION_NAME                      Organization name
 --organization-id ORGANIZATION_ID                     Organization ID
 --organization-title ORGANIZATION_TITLE               Organization title
 --parent-id PARENT_ID                                 Parent ID
 --partition-table-ids PARTITION_TABLE_IDS             Partition template IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --partition-tables PARTITION_TABLE_NAMES              Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --provisioning-template-ids PROVISIONING_TEMPLATE_IDS Provisioning template IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --provisioning-templates PROVISIONING_TEMPLATE_NAMES  Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --puppet-environment-ids PUPPET_ENVIRONMENT_IDS       Environment IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --puppet-environments PUPPET_ENVIRONMENT_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --realm-ids REALM_IDS                                 Realm IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --realms REALM_NAMES                                  Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --smart-proxies SMART_PROXY_NAMES                     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --smart-proxy-ids SMART_PROXY_IDS                     Capsule IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --subnet-ids SUBNET_IDS                               Subnet IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --subnets SUBNET_NAMES                                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --user-ids USER_IDS                                   User IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --users USER_LOGINS                                   Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 -h, --help                                            Print help

2.39.12. hammer location delete

ロケーションを削除します。

Usage:
    hammer location delete [OPTIONS]

Options:
 --id ID                                 Location numeric id to search by
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Organization name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --title TITLE                           Organization title
 -h, --help                              Print help

2.39.13. hammer location delete-parameter

ロケーションのパラメーターを削除します。

Usage:
    hammer location delete-parameter [OPTIONS]

Options:
 --location LOCATION_NAME        Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE Location title
 --name NAME                     Parameter name
 -h, --help                      Print help

2.39.14. hammer location info

ロケーションを表示します。

Usage:
    hammer location info [OPTIONS]

Options:
 --id ID                                         Location numeric id to search by
 --location LOCATION_NAME                        Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE                 Location title
 --name NAME                                     Organization name
 --organization ORGANIZATION_NAME                Organization name
 --organization-id ORGANIZATION_ID               Organization ID
 --organization-title ORGANIZATION_TITLE         Organization title
 --show-hidden-parameters SHOW_HIDDEN_PARAMETERS Display hidden parameter values
                                                 One of true/false, yes/no, 1/0.
 --title TITLE                                   Organization title
 -h, --help                                      Print help

2.39.15. hammer location list

ロケーションの一覧を表示します。

Usage:
    hammer location list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

2.39.16. hammer location remove-compute-resource

コンピュートリソースの関連付けを解除します。

Usage:
    hammer location remove-compute-resource [OPTIONS]

Options:
 --compute-resource COMPUTE_RESOURCE_NAME  Compute resource name
 --compute-resource-id COMPUTE_RESOURCE_ID
 --id ID
 --name NAME                               Location name
 --title TITLE                             Location title
 -h, --help                                Print help

2.39.17. hammer location remove-config-template

設定テンプレートの関連付けを解除します。

Usage:
    hammer location remove-config-template [OPTIONS]

Options:
 --config-template CONFIG_TEMPLATE_NAME  Name to search by
 --config-template-id CONFIG_TEMPLATE_ID
 --id ID
 --name NAME                             Location name
 --title TITLE                           Location title
 -h, --help                              Print help

2.39.18. hammer location remove-domain

ドメインの関連付けを解除します。

Usage:
    hammer location remove-domain [OPTIONS]

Options:
 --domain DOMAIN_NAME          Domain name
 --domain-id DOMAIN_ID         Numerical ID or domain name
 --id ID
 --name NAME                   Location name
 --title TITLE                 Location title
 -h, --help                    Print help

2.39.19. hammer location remove-environment

Puppet 環境を関連付けを解除します。

Usage:
    hammer location remove-environment [OPTIONS]

Options:
 --environment ENVIRONMENT_NAME                Environment name (--environment is deprecated: Use --puppet-environment instead)
 --environment-id ENVIRONMENT_ID               (--environment-id is deprecated: Use --puppet-environment-id instead)
 --id ID
 --name NAME                                   Location name
 --puppet-environment PUPPET_ENVIRONMENT_NAME  Puppet environment name
 --puppet-environment-id PUPPET_ENVIRONMENT_ID
 --title TITLE                                 Location title
 -h, --help                                    Print help

2.39.20. hammer location remove-hostgroup

ホストグループの関連付けを解除します。

Usage:
    hammer location remove-hostgroup [OPTIONS]

Options:
 --hostgroup HOSTGROUP_NAME        Hostgroup name
 --hostgroup-id HOSTGROUP_ID
 --hostgroup-title HOSTGROUP_TITLE Hostgroup title
 --id ID
 --name NAME                       Location name
 --title TITLE                     Location title
 -h, --help                        Print help

2.39.21. hammer location remove-medium

メディアの関連付けを解除します。

Usage:
    hammer location remove-medium [OPTIONS]

Options:
 --id ID
 --medium MEDIUM_NAME          Medium name
 --medium-id MEDIUM_ID
 --name NAME                   Location name
 --title TITLE                 Location title
 -h, --help                    Print help

2.39.22. hammer location remove-organization

組織の関連付けを解除します。

Usage:
    hammer location remove-organization [OPTIONS]

Options:
 --id ID
 --name NAME                             Location name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --title TITLE                           Location title
 -h, --help                              Print help

2.39.23. hammer location remove-smart-proxy

スマートプロキシーの関連付けを解除します。

Usage:
    hammer location remove-smart-proxy [OPTIONS]

Options:
 --id ID
 --name NAME                     Location name
 --smart-proxy SMART_PROXY_NAME  Name to search by
 --smart-proxy-id SMART_PROXY_ID
 --title TITLE                   Location title
 -h, --help                      Print help

2.39.24. hammer location remove-subnet

サブネットの関連付けを解除します。

Usage:
    hammer location remove-subnet [OPTIONS]

Options:
 --id ID
 --name NAME                   Location name
 --subnet SUBNET_NAME          Subnet name
 --subnet-id SUBNET_ID
 --title TITLE                 Location title
 -h, --help                    Print help

2.39.25. hammer location remove-user

ユーザーの関連付けを解除します。

Usage:
    hammer location remove-user [OPTIONS]

Options:
 --id ID
 --name NAME                   Location name
 --title TITLE                 Location title
 --user USER_LOGIN             User's login to search by
 --user-id USER_ID
 -h, --help                    Print help

2.39.26. hammer location set-parameter

ロケーションのパラメーターを作成または更新します。

Usage:
    hammer location set-parameter [OPTIONS]

Options:
 --hidden-value HIDDEN_VALUE     Should the value be hidden
                                 One of true/false, yes/no, 1/0.
 --location LOCATION_NAME        Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE Location title
 --name NAME                     Parameter name
 --parameter-type PARAMETER_TYPE Type of the parameter
                                 Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json'
                                 Default: "string"
 --value VALUE                   Parameter value
 -h, --help                      Print help

2.39.27. hammer location update

ロケーションを更新します。

Usage:
    hammer location update [OPTIONS]

Options:
 --compute-resource-ids COMPUTE_RESOURCE_IDS           Compute resource IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --compute-resources COMPUTE_RESOURCE_NAMES            Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --config-template-ids CONFIG_TEMPLATE_IDS             Provisioning template IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --config-templates CONFIG_TEMPLATE_NAMES              Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --description DESCRIPTION
 --domain-ids DOMAIN_IDS                               Domain IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --domains DOMAIN_NAMES                                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --environment-ids ENVIRONMENT_IDS                     Environment IDs (--environment-ids is deprecated: Use --puppet-environment-ids instead)
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --environments ENVIRONMENT_NAMES                      (--environments is deprecated: Use --puppet-environments instead)
 --hostgroup-ids HOSTGROUP_IDS                         Host group IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --hostgroup-titles HOSTGROUP_TITLES                   Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --hostgroups HOSTGROUP_NAMES                          Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --id ID                                               Location numeric id to search by
 --ignore-types IGNORE_TYPES                           List of resources types that will be automatically associated
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --location LOCATION_NAME                              Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE                       Location title
 --media MEDIUM_NAMES                                  Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --medium-ids MEDIUM_IDS                               Medium IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --name NAME                                           Location name
 --new-name NEW_NAME
 --organization ORGANIZATION_NAME                      Organization name
 --organization-id ORGANIZATION_ID                     Organization ID
 --organization-title ORGANIZATION_TITLE               Organization title
 --parent-id PARENT_ID                                 Parent ID
 --partition-table-ids PARTITION_TABLE_IDS             Partition template IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --partition-tables PARTITION_TABLE_NAMES              Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --provisioning-template-ids PROVISIONING_TEMPLATE_IDS Provisioning template IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --provisioning-templates PROVISIONING_TEMPLATE_NAMES  Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --puppet-environment-ids PUPPET_ENVIRONMENT_IDS       Environment IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --puppet-environments PUPPET_ENVIRONMENT_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --realm-ids REALM_IDS                                 Realm IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --realms REALM_NAMES                                  Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --smart-proxies SMART_PROXY_NAMES                     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --smart-proxy-ids SMART_PROXY_IDS                     Capsule IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --subnet-ids SUBNET_IDS                               Subnet IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --subnets SUBNET_NAMES                                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --title TITLE                                         Location title
 --user-ids USER_IDS                                   User IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --users USER_LOGINS                                   Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 -h, --help                                            Print help

2.40. hammer medium

インストールメディアを操作します。

Usage:
    hammer medium [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 add-operatingsystem           Associate an operating system
 create                        Create a medium
 delete                        Delete a medium
 info                          Show a medium
 list                          List all installation media
 remove-operatingsystem        Disassociate an operating system
 update                        Update a medium

Options:
 -h, --help                    Print help

2.40.1. hammer medium add-operatingsystem

オペレーティングシステムを関連付けます。

Usage:
    hammer medium add-operatingsystem [OPTIONS]

Options:
 --id ID
 --name NAME                             Medium name
 --operatingsystem OPERATINGSYSTEM_TITLE Operating system title
 --operatingsystem-id OPERATINGSYSTEM_ID
 -h, --help                              Print help

2.40.2. hammer medium create

メディアを作成します。

Usage:
    hammer medium create [OPTIONS]

Options:
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --name NAME                               Name of media
 --operatingsystem-ids OPERATINGSYSTEM_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --operatingsystems OPERATINGSYSTEM_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --os-family OS_FAMILY                     Operating system family, available values: AIX, Altlinux, Archlinux,
                                           Coreos, Debian, Freebsd, Gentoo, Junos, NXOS, Rancheros, Redhat, Solaris,
                                           Suse, VRP, Windows, Xenserver
 --path PATH                               The path to the medium, can be a URL or a valid NFS server (exclusive of
                                           The architecture).

                                           For example mirror.centos.org/centos/$version/os/$arch
                                           Where $arch will be substituted for the host's actual OS architecture
                                           And $version, $major and $minor will be substituted for the version of the
                                           Operating system.

                                           Solaris and Debian media may also use $release.
 -h, --help                                Print help

2.40.3. hammer medium delete

メディアを削除します。

Usage:
    hammer medium delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Medium name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.40.4. hammer medium info

メディアを表示します。

Usage:
    hammer medium info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Medium name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.40.5. hammer medium list

インストールメディアの一覧を表示します。

Usage:
    hammer medium list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --operatingsystem OPERATINGSYSTEM_TITLE Operating system title
 --operatingsystem-id OPERATINGSYSTEM_ID
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  family              string
  location            string
  location_id         integer
  name                string
  organization        string
  organization_id     integer
  path                string

2.40.6. hammer medium remove-operatingsystem

オペレーティングシステムの関連付けを解除します。

Usage:
    hammer medium remove-operatingsystem [OPTIONS]

Options:
 --id ID
 --name NAME                             Medium name
 --operatingsystem OPERATINGSYSTEM_TITLE Operating system title
 --operatingsystem-id OPERATINGSYSTEM_ID
 -h, --help                              Print help

2.40.7. hammer medium update

メディアを更新します。

Usage:
    hammer medium update [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --name NAME                               Medium name
 --new-name NEW_NAME                       Name of media
 --operatingsystem-ids OPERATINGSYSTEM_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --operatingsystems OPERATINGSYSTEM_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --os-family OS_FAMILY                     Operating system family, available values: AIX, Altlinux, Archlinux,
                                           Coreos, Debian, Freebsd, Gentoo, Junos, NXOS, Rancheros, Redhat, Solaris,
                                           Suse, VRP, Windows, Xenserver
 --path PATH                               The path to the medium, can be a URL or a valid NFS server (exclusive of
                                           The architecture).

                                           For example mirror.centos.org/centos/$version/os/$arch
                                           Where $arch will be substituted for the host's actual OS architecture
                                           And $version, $major and $minor will be substituted for the version of the
                                           Operating system.

                                           Solaris and Debian media may also use $release.
 -h, --help                                Print help

2.41. hammer model

ハードウェアモデルを操作します。

Usage:
    hammer model [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 create                        Create a hardware model
 delete                        Delete a hardware model
 info                          Show a hardware model
 list                          List all hardware models
 update                        Update a hardware model

Options:
 -h, --help                    Print help

2.41.1. hammer model create

ハードウェアモデルを作成します。

Usage:
    hammer model create [OPTIONS]

Options:
 --hardware-model HARDWARE_MODEL
 --info INFO
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --vendor-class VENDOR_CLASS
 -h, --help                              Print help

2.41.2. hammer model delete

ハードウェアモデルを削除します。

Usage:
    hammer model delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Model name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.41.3. hammer model info

ハードウェアモデルを表示します。

Usage:
    hammer model info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Model name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.41.4. hammer model list

ハードウェアモデルの一覧を表示します。

Usage:
    hammer model list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  hardware_model      string
  info                text
  name                string
  vendor_class        string

2.41.5. hammer model update

ハードウェアモデルを更新します。

Usage:
    hammer model update [OPTIONS]

Options:
 --hardware-model HARDWARE_MODEL
 --id ID
 --info INFO
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Model name
 --new-name NEW_NAME
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --vendor-class VENDOR_CLASS
 -h, --help                              Print help

2.42. hammer module-stream

モジュールストリームを表示します。

Usage:
    hammer module-stream [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 info                          Show a module stream
 list                          List module streams

Options:
 -h, --help                    Print help

2.42.1. hammer module-stream info

モジュールストリームを表示します。

Usage:
    hammer module-stream info [OPTIONS]

Options:
 --id ID                                 A module stream identifier
 --name NAME                             Module stream name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --product PRODUCT_NAME                  Product name to search by
 --product-id PRODUCT_ID                 Product numeric identifier
 --repository REPOSITORY_NAME            Repository name to search by
 --repository-id REPOSITORY_ID           Repository ID
 -h, --help                              Print help

2.42.2. hammer module-stream list

モジュールストリームを一覧で表示します。

Usage:
    hammer module-stream list [OPTIONS]

Options:
 --content-view-filter CONTENT_VIEW_FILTER_NAME      Name to search by
 --content-view-filter-id CONTENT_VIEW_FILTER_ID     Filter identifier
 --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number
 --content-view-version-id CONTENT_VIEW_VERSION_ID   Content view version identifier
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by
 --environment-id ENVIRONMENT_ID
 --full-result FULL_RESULT                           Whether or not to show all results
                                                     One of true/false, yes/no, 1/0.
 --host-ids HOST_IDS                                 List of host id to list available module streams for
                                                     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                     JSON is acceptable and preferred way for complex parameters
 --hosts HOST_NAMES                                  Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                     JSON is acceptable and preferred way for complex parameters
 --ids IDS                                           Ids to filter content by
                                                     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                     JSON is acceptable and preferred way for complex parameters
 --name-stream-only NAME_STREAM_ONLY                 Return name and stream information only)
                                                     One of true/false, yes/no, 1/0.
 --order ORDER                                       Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 --page PAGE                                         Page number, starting at 1
 --per-page PER_PAGE                                 Number of results per page to return
 --product PRODUCT_NAME                              Product name to search by
 --product-id PRODUCT_ID                             Product numeric identifier
 --repository REPOSITORY_NAME                        Repository name to search by
 --repository-id REPOSITORY_ID                       Repository ID
 --search SEARCH                                     Search string
 -h, --help                                          Print help

2.43. hammer organization

組織を操作します。

Usage:
    hammer organization [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 add-compute-resource          Associate a compute resource
 add-config-template           Associate a configuration template
 add-domain                    Associate a domain
 add-environment               Associate a Puppet environment
 add-hostgroup                 Associate a hostgroup
 add-location                  Associate a location
 add-medium                    Associate a medium
 add-smart-proxy               Associate a smart proxy
 add-subnet                    Associate a subnet
 add-user                      Associate an user
 create                        Create organization
 delete                        Delete an organization
 delete-parameter              Delete parameter for an organization
 info                          Show organization
 list                          List all organizations
 remove-compute-resource       Disassociate a compute resource
 remove-config-template        Disassociate a configuration template
 remove-domain                 Disassociate a domain
 remove-environment            Disassociate a Puppet environment
 remove-hostgroup              Disassociate a hostgroup
 remove-location               Disassociate a location
 remove-medium                 Disassociate a medium
 remove-smart-proxy            Disassociate a smart proxy
 remove-subnet                 Disassociate a subnet
 remove-user                   Disassociate an user
 set-parameter                 Create or update parameter for an organization
 update                        Update organization

Options:
 -h, --help                    Print help

2.43.1. hammer organization add-compute-resource

コンピュートリソースを関連付けます。

Usage:
    hammer organization add-compute-resource [OPTIONS]

Options:
 --compute-resource COMPUTE_RESOURCE_NAME  Compute resource name
 --compute-resource-id COMPUTE_RESOURCE_ID
 --id ID                                   Organization ID
 --name NAME                               Organization name
 --title TITLE                             Organization title
 -h, --help                                Print help

2.43.2. hammer organization add-config-template

設定テンプレートを関連付けます。

Usage:
    hammer organization add-config-template [OPTIONS]

Options:
 --config-template CONFIG_TEMPLATE_NAME  Name to search by
 --config-template-id CONFIG_TEMPLATE_ID
 --id ID                                 Organization ID
 --name NAME                             Organization name
 --title TITLE                           Organization title
 -h, --help                              Print help

2.43.3. hammer organization add-domain

ドメインを関連付けます。

Usage:
    hammer organization add-domain [OPTIONS]

Options:
 --domain DOMAIN_NAME          Domain name
 --domain-id DOMAIN_ID         Numerical ID or domain name
 --id ID                       Organization ID
 --name NAME                   Organization name
 --title TITLE                 Organization title
 -h, --help                    Print help

2.43.4. hammer organization add-environment

Puppet 環境を関連付けます。

Usage:
    hammer organization add-environment [OPTIONS]

Options:
 --environment ENVIRONMENT_NAME                Environment name (--environment is deprecated: Use --puppet-environment instead)
 --environment-id ENVIRONMENT_ID               (--environment-id is deprecated: Use --puppet-environment-id instead)
 --id ID                                       Organization ID
 --name NAME                                   Organization name
 --puppet-environment PUPPET_ENVIRONMENT_NAME  Puppet environment name
 --puppet-environment-id PUPPET_ENVIRONMENT_ID
 --title TITLE                                 Organization title
 -h, --help                                    Print help

2.43.5. hammer organization add-hostgroup

ホストグループを関連付けます。

Usage:
    hammer organization add-hostgroup [OPTIONS]

Options:
 --hostgroup HOSTGROUP_NAME        Hostgroup name
 --hostgroup-id HOSTGROUP_ID
 --hostgroup-title HOSTGROUP_TITLE Hostgroup title
 --id ID                           Organization ID
 --name NAME                       Organization name
 --title TITLE                     Organization title
 -h, --help                        Print help

2.43.6. hammer organization add-location

ロケーションを関連付けます。

Usage:
    hammer organization add-location [OPTIONS]

Options:
 --id ID                         Organization ID
 --location LOCATION_NAME        Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE Location title
 --name NAME                     Organization name
 --title TITLE                   Organization title
 -h, --help                      Print help

2.43.7. hammer organization add-medium

メディアを関連付けます。

Usage:
    hammer organization add-medium [OPTIONS]

Options:
 --id ID                       Organization ID
 --medium MEDIUM_NAME          Medium name
 --medium-id MEDIUM_ID
 --name NAME                   Organization name
 --title TITLE                 Organization title
 -h, --help                    Print help

2.43.8. hammer organization add-smart-proxy

スマートプロキシーを関連付けます。

Usage:
    hammer organization add-smart-proxy [OPTIONS]

Options:
 --id ID                         Organization ID
 --name NAME                     Organization name
 --smart-proxy SMART_PROXY_NAME  Name to search by
 --smart-proxy-id SMART_PROXY_ID
 --title TITLE                   Organization title
 -h, --help                      Print help

2.43.9. hammer organization add-subnet

サブネットを関連付けます。

Usage:
    hammer organization add-subnet [OPTIONS]

Options:
 --id ID                       Organization ID
 --name NAME                   Organization name
 --subnet SUBNET_NAME          Subnet name
 --subnet-id SUBNET_ID
 --title TITLE                 Organization title
 -h, --help                    Print help

2.43.10. hammer organization add-user

ユーザーを関連付けます。

Usage:
    hammer organization add-user [OPTIONS]

Options:
 --id ID                       Organization ID
 --name NAME                   Organization name
 --title TITLE                 Organization title
 --user USER_LOGIN             User's login to search by
 --user-id USER_ID
 -h, --help                    Print help

2.43.11. hammer organization create

組織を作成します。

Usage:
    hammer organization create [OPTIONS]

Options:
 --compute-resource-ids COMPUTE_RESOURCE_IDS           Compute resource IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --compute-resources COMPUTE_RESOURCE_NAMES            Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --config-template-ids CONFIG_TEMPLATE_IDS             Provisioning template IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --config-templates CONFIG_TEMPLATE_NAMES              Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --description DESCRIPTION                             Description
 --domain-ids DOMAIN_IDS                               Domain IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --domains DOMAIN_NAMES                                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --environment-ids ENVIRONMENT_IDS                     Environment IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --environments ENVIRONMENT_NAMES                      Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --hostgroup-ids HOSTGROUP_IDS                         Host group IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --hostgroup-titles HOSTGROUP_TITLES                   Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --hostgroups HOSTGROUP_NAMES                          Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --label LABEL                                         Unique label
 --location LOCATION_NAME                              Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE                       Location title
 --media MEDIUM_NAMES                                  Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --medium-ids MEDIUM_IDS                               Medium IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --name NAME                                           Name
 --organization ORGANIZATION_NAME                      Organization name to search by
 --organization-id ORGANIZATION_ID                     Organization ID
 --organization-label ORGANIZATION_LABEL               Organization label to search by
 --provisioning-template-ids PROVISIONING_TEMPLATE_IDS Provisioning template IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --provisioning-templates PROVISIONING_TEMPLATE_NAMES  Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --ptable-ids PTABLE_IDS                               Partition template IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --ptables PTABLE_NAMES                                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --realm-ids REALM_IDS                                 Realm IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --realms REALM_NAMES                                  Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --smart-proxies SMART_PROXY_NAMES                     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --smart-proxy-ids SMART_PROXY_IDS                     Capsule IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --subnet-ids SUBNET_IDS                               Subnet IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --subnets SUBNET_NAMES                                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --user-ids USER_IDS                                   User IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --users USER_LOGINS                                   Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 -h, --help                                            Print help

2.43.12. hammer organization delete

組織を削除します。

Usage:
    hammer organization delete [OPTIONS]

Options:
 --async                                 Do not wait for the task
 --id ID
 --label LABEL                           Organization label to search by
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Organization name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --organization-title ORGANIZATION_TITLE Organization title
 --title TITLE                           Organization title
 -h, --help                              Print help

2.43.13. hammer organization delete-parameter

組織のパラメーターを削除します。

Usage:
    hammer organization delete-parameter [OPTIONS]

Options:
 --name NAME                             Parameter name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.43.14. hammer organization info

組織を表示します。

Usage:
    hammer organization info [OPTIONS]

Options:
 --id ID
 --label LABEL                           Organization label to search by
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Organization name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --organization-title ORGANIZATION_TITLE Organization title
 --title TITLE                           Organization title
 -h, --help                              Print help

2.43.15. hammer organization list

組織の一覧を表示します。

Usage:
    hammer organization list [OPTIONS]

Options:
 --full-result FULL_RESULT               Whether or not to show all results
                                         One of true/false, yes/no, 1/0.
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Page number, starting at 1
 --per-page PER_PAGE                     Number of results per page to return
 --search SEARCH                         Search string
 --sort-by SORT_BY                       Field to sort the results on
 --sort-order SORT_ORDER                 How to order the sorted results (e.g. ASC for ascending)
 -h, --help                              Print help

2.43.16. hammer organization remove-compute-resource

コンピュートリソースの関連付けを解除します。

Usage:
    hammer organization remove-compute-resource [OPTIONS]

Options:
 --compute-resource COMPUTE_RESOURCE_NAME  Compute resource name
 --compute-resource-id COMPUTE_RESOURCE_ID
 --id ID                                   Organization ID
 --name NAME                               Organization name
 --title TITLE                             Organization title
 -h, --help                                Print help

2.43.17. hammer organization remove-config-template

設定テンプレートの関連付けを解除します。

Usage:
    hammer organization remove-config-template [OPTIONS]

Options:
 --config-template CONFIG_TEMPLATE_NAME  Name to search by
 --config-template-id CONFIG_TEMPLATE_ID
 --id ID                                 Organization ID
 --name NAME                             Organization name
 --title TITLE                           Organization title
 -h, --help                              Print help

2.43.18. hammer organization remove-domain

ドメインの関連付けを解除します。

Usage:
    hammer organization remove-domain [OPTIONS]

Options:
 --domain DOMAIN_NAME          Domain name
 --domain-id DOMAIN_ID         Numerical ID or domain name
 --id ID                       Organization ID
 --name NAME                   Organization name
 --title TITLE                 Organization title
 -h, --help                    Print help

2.43.19. hammer organization remove-environment

Puppet 環境を関連付けを解除します。

Usage:
    hammer organization remove-environment [OPTIONS]

Options:
 --environment ENVIRONMENT_NAME                Environment name (--environment is deprecated: Use --puppet-environment instead)
 --environment-id ENVIRONMENT_ID               (--environment-id is deprecated: Use --puppet-environment-id instead)
 --id ID                                       Organization ID
 --name NAME                                   Organization name
 --puppet-environment PUPPET_ENVIRONMENT_NAME  Puppet environment name
 --puppet-environment-id PUPPET_ENVIRONMENT_ID
 --title TITLE                                 Organization title
 -h, --help                                    Print help

2.43.20. hammer organization remove-hostgroup

ホストグループの関連付けを解除します。

Usage:
    hammer organization remove-hostgroup [OPTIONS]

Options:
 --hostgroup HOSTGROUP_NAME        Hostgroup name
 --hostgroup-id HOSTGROUP_ID
 --hostgroup-title HOSTGROUP_TITLE Hostgroup title
 --id ID                           Organization ID
 --name NAME                       Organization name
 --title TITLE                     Organization title
 -h, --help                        Print help

2.43.21. hammer organization remove-location

ロケーションの関連付けを解除します。

Usage:
    hammer organization remove-location [OPTIONS]

Options:
 --id ID                         Organization ID
 --location LOCATION_NAME        Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE Location title
 --name NAME                     Organization name
 --title TITLE                   Organization title
 -h, --help                      Print help

2.43.22. hammer organization remove-medium

メディアの関連付けを解除します。

Usage:
    hammer organization remove-medium [OPTIONS]

Options:
 --id ID                       Organization ID
 --medium MEDIUM_NAME          Medium name
 --medium-id MEDIUM_ID
 --name NAME                   Organization name
 --title TITLE                 Organization title
 -h, --help                    Print help

2.43.23. hammer organization remove-smart-proxy

スマートプロキシーの関連付けを解除します。

Usage:
    hammer organization remove-smart-proxy [OPTIONS]

Options:
 --id ID                         Organization ID
 --name NAME                     Organization name
 --smart-proxy SMART_PROXY_NAME  Name to search by
 --smart-proxy-id SMART_PROXY_ID
 --title TITLE                   Organization title
 -h, --help                      Print help

2.43.24. hammer organization remove-subnet

サブネットの関連付けを解除します。

Usage:
    hammer organization remove-subnet [OPTIONS]

Options:
 --id ID                       Organization ID
 --name NAME                   Organization name
 --subnet SUBNET_NAME          Subnet name
 --subnet-id SUBNET_ID
 --title TITLE                 Organization title
 -h, --help                    Print help

2.43.25. hammer organization remove-user

ユーザーの関連付けを解除します。

Usage:
    hammer organization remove-user [OPTIONS]

Options:
 --id ID                       Organization ID
 --name NAME                   Organization name
 --title TITLE                 Organization title
 --user USER_LOGIN             User's login to search by
 --user-id USER_ID
 -h, --help                    Print help

2.43.26. hammer organization set-parameter

組織のパラメーターを作成または更新します。

Usage:
    hammer organization set-parameter [OPTIONS]

Options:
 --hidden-value HIDDEN_VALUE             Should the value be hidden
                                         One of true/false, yes/no, 1/0.
 --name NAME                             Parameter name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --parameter-type PARAMETER_TYPE         Type of the parameter
                                         Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json'
                                         Default: "string"
 --value VALUE                           Parameter value
 -h, --help                              Print help

2.43.27. hammer organization update

組織を更新します。

Usage:
    hammer organization update [OPTIONS]

Options:
 --compute-resource-ids COMPUTE_RESOURCE_IDS           Compute resource IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --compute-resources COMPUTE_RESOURCE_NAMES            Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --config-template-ids CONFIG_TEMPLATE_IDS             Provisioning template IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --config-templates CONFIG_TEMPLATE_NAMES              Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --description DESCRIPTION
 --domain-ids DOMAIN_IDS                               Domain IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --domains DOMAIN_NAMES                                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --environment-ids ENVIRONMENT_IDS                     Environment IDs (--environment-ids is deprecated: Use --puppet-environment-ids instead)
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --environments ENVIRONMENT_NAMES                      (--environments is deprecated: Use --puppet-environments instead)
 --hostgroup-ids HOSTGROUP_IDS                         Host group IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --hostgroup-titles HOSTGROUP_TITLES                   Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --hostgroups HOSTGROUP_NAMES                          Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --id ID
 --ignore-types IGNORE_TYPES                           List of resources types that will be automatically associated
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --label LABEL                                         Organization label to search by
 --location LOCATION_NAME                              Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE                       Location title
 --media MEDIUM_NAMES                                  Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --medium-ids MEDIUM_IDS                               Medium IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --name NAME                                           Organization name
 --new-name NEW_NAME
 --organization ORGANIZATION_NAME                      Organization name
 --organization-id ORGANIZATION_ID                     Organization ID
 --organization-label ORGANIZATION_LABEL               Organization label to search by
 --organization-title ORGANIZATION_TITLE               Organization title
 --parent-id PARENT_ID                                 Parent ID
 --partition-table-ids PARTITION_TABLE_IDS             Partition template IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --partition-tables PARTITION_TABLE_NAMES              Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --provisioning-template-ids PROVISIONING_TEMPLATE_IDS Provisioning template IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --provisioning-templates PROVISIONING_TEMPLATE_NAMES  Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --ptable-ids PTABLE_IDS                               Partition template IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --ptables PTABLE_NAMES                                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --puppet-environment-ids PUPPET_ENVIRONMENT_IDS       Environment IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --puppet-environments PUPPET_ENVIRONMENT_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --realm-ids REALM_IDS                                 Realm IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --realms REALM_NAMES                                  Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --redhat-repository-url REDHAT_REPOSITORY_URL         Red Hat CDN URL
 --smart-proxies SMART_PROXY_NAMES                     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --smart-proxy-ids SMART_PROXY_IDS                     Capsule IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --subnet-ids SUBNET_IDS                               Subnet IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --subnets SUBNET_NAMES                                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --title TITLE                                         Organization title
 --user-ids USER_IDS                                   User IDs
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --users USER_LOGINS                                   Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 -h, --help                                            Print help

2.44. hammer os

オペレーティングシステムを操作します。

Usage:
    hammer os [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 add-architecture              Associate an architecture
 add-config-template           Associate a configuration template
 add-ptable                    Associate a partition table
 create                        Create an operating system
 delete                        Delete an operating system
 delete-default-template
 delete-parameter              Delete parameter for an operating system
 info                          Show an operating system
 list                          List all operating systems
 remove-architecture           Disassociate an architecture
 remove-config-template        Disassociate a configuration template
 remove-ptable                 Disassociate a partition table
 set-default-template
 set-parameter                 Create or update parameter for an operating system
 update                        Update an operating system

Options:
 -h, --help                    Print help

2.44.1. hammer os add-architecture

アーキテクチャーを関連付けます。

Usage:
    hammer os add-architecture [OPTIONS]

Options:
 --architecture ARCHITECTURE_NAME  Architecture name
 --architecture-id ARCHITECTURE_ID
 --id ID
 --title TITLE                     Operating system title
 -h, --help                        Print help

2.44.2. hammer os add-config-template

設定テンプレートを関連付けます。

Usage:
    hammer os add-config-template [OPTIONS]

Options:
 --config-template CONFIG_TEMPLATE_NAME  Name to search by
 --config-template-id CONFIG_TEMPLATE_ID
 --id ID
 --title TITLE                           Operating system title
 -h, --help                              Print help

2.44.3. hammer os add-ptable

パーティションテーブルを関連付けます。

Usage:
    hammer os add-ptable [OPTIONS]

Options:
 --id ID
 --partition-table PARTITION_TABLE_NAME  Partition table name
 --partition-table-id PARTITION_TABLE_ID
 --title TITLE                           Operating system title
 -h, --help                              Print help

2.44.4. hammer os create

オペレーティングシステムを作成します。

Usage:
    hammer os create [OPTIONS]

Options:
 --architecture-ids ARCHITECTURE_IDS                   IDs of associated architectures
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --architectures ARCHITECTURE_NAMES                    Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --config-template-ids CONFIG_TEMPLATE_IDS             IDs of associated provisioning templates
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --config-templates CONFIG_TEMPLATE_NAMES              Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --description DESCRIPTION
 --family FAMILY
 --location LOCATION_NAME                              Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE                       Location title
 --major MAJOR
 --media MEDIUM_NAMES                                  Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --medium-ids MEDIUM_IDS                               IDs of associated media
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --minor MINOR
 --name NAME
 --organization ORGANIZATION_NAME                      Organization name
 --organization-id ORGANIZATION_ID                     Organization ID
 --organization-title ORGANIZATION_TITLE               Organization title
 --os-parameters-attributes OS_PARAMETERS_ATTRIBUTES   Array of parameters
                                                       Comma separated list of values defined by a schema. See Option details section below.
                                                       JSON is acceptable and preferred way for complex parameters
 --partition-table-ids PARTITION_TABLE_IDS             IDs of associated partition tables
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --partition-tables PARTITION_TABLE_NAMES              Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --password-hash PASSWORD_HASH                         Root password hash function to use, one of MD5, SHA256, SHA512, Base64
 --provisioning-template-ids PROVISIONING_TEMPLATE_IDS IDs of associated provisioning templates
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --provisioning-templates PROVISIONING_TEMPLATE_NAMES  Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --release-name RELEASE_NAME
 -h, --help                                            Print help

Option details:
  Following parameters accept format defined by its schema (bold are required):

  --os-parameters-attributes  "name=string\,value=string, ... "

2.44.5. hammer os delete

オペレーティングシステムを削除します。

Usage:
    hammer os delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --title TITLE                           Operating system title
 -h, --help                              Print help

2.44.6. hammer os delete-default-template

Usage:
    hammer os delete-default-template [OPTIONS]

Options:
 --id OS ID                    Operatingsystem id
 --type TPL TYPE               Type of the config template
 -h, --help                    Print help

2.44.7. hammer os delete-parameter

オペレーティングシステムのパラメーターを削除します。

Usage:
    hammer os delete-parameter [OPTIONS]

Options:
 --name NAME                             Parameter name
 --operatingsystem OPERATINGSYSTEM_TITLE Operating system title
 --operatingsystem-id OPERATINGSYSTEM_ID
 -h, --help                              Print help

2.44.8. hammer os info

オペレーティングシステムを表示します。

Usage:
    hammer os info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                        Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE                 Location title
 --organization ORGANIZATION_NAME                Organization name
 --organization-id ORGANIZATION_ID               Organization ID
 --organization-title ORGANIZATION_TITLE         Organization title
 --show-hidden-parameters SHOW_HIDDEN_PARAMETERS Display hidden parameter values
                                                 One of true/false, yes/no, 1/0.
 --title TITLE                                   Operating system title
 -h, --help                                      Print help

2.44.9. hammer os list

オペレーティングシステムの一覧を表示します。

Usage:
    hammer os list [OPTIONS]

Options:
 --architecture ARCHITECTURE_NAME                    Architecture name
 --architecture-id ARCHITECTURE_ID
 --config-template CONFIG_TEMPLATE_NAME              Name to search by
 --config-template-id CONFIG_TEMPLATE_ID
 --location LOCATION_NAME                            Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE                     Location title
 --medium MEDIUM_NAME                                Medium name
 --medium-id MEDIUM_ID
 --order ORDER                                       Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME                    Organization name
 --organization-id ORGANIZATION_ID                   Organization ID
 --organization-title ORGANIZATION_TITLE             Organization title
 --os-parameters-attributes OS_PARAMETERS_ATTRIBUTES Array of parameters
                                                     Comma separated list of values defined by a schema. See Option details section below.
                                                     JSON is acceptable and preferred way for complex parameters
 --page PAGE                                         Paginate results
 --partition-table PARTITION_TABLE_NAME              Partition table name
 --partition-table-id PARTITION_TABLE_ID
 --per-page PER_PAGE                                 Number of entries per request
 --provisioning-template PROVISIONING_TEMPLATE_NAME  Name to search by
 --provisioning-template-id PROVISIONING_TEMPLATE_ID
 --search SEARCH                                     Filter results
 -h, --help                                          Print help

Option details:
  Following parameters accept format defined by its schema (bold are required):

  --os-parameters-attributes  "name=string\,value=string, ... "

Search / Order fields:
  architecture        string
  description         string
  family              string
  major               string
  medium              string
  minor               string
  name                string
  params              text
  template            string
  title               string

2.44.10. hammer os remove-architecture

アーキテクチャーの関連付けを解除します。

Usage:
    hammer os remove-architecture [OPTIONS]

Options:
 --architecture ARCHITECTURE_NAME  Architecture name
 --architecture-id ARCHITECTURE_ID
 --id ID
 --title TITLE                     Operating system title
 -h, --help                        Print help

2.44.11. hammer os remove-config-template

設定テンプレートの関連付けを解除します。

Usage:
    hammer os remove-config-template [OPTIONS]

Options:
 --config-template CONFIG_TEMPLATE_NAME  Name to search by
 --config-template-id CONFIG_TEMPLATE_ID
 --id ID
 --title TITLE                           Operating system title
 -h, --help                              Print help

2.44.12. hammer os remove-ptable

パーティションテーブルの関連付けを解除します。

Usage:
    hammer os remove-ptable [OPTIONS]

Options:
 --id ID
 --partition-table PARTITION_TABLE_NAME  Partition table name
 --partition-table-id PARTITION_TABLE_ID
 --title TITLE                           Operating system title
 -h, --help                              Print help

2.44.13. hammer os set-default-template

Usage:
    hammer os set-default-template [OPTIONS]

Options:
 --config-template-id TPL ID   Config template id to be set
 --id OS ID                    Operatingsystem id
 -h, --help                    Print help

2.44.14. hammer os set-parameter

オペレーティングシステムのパラメーターを作成または更新します。

Usage:
    hammer os set-parameter [OPTIONS]

Options:
 --hidden-value HIDDEN_VALUE             Should the value be hidden
                                         One of true/false, yes/no, 1/0.
 --name NAME                             Parameter name
 --operatingsystem OPERATINGSYSTEM_TITLE Operating system title
 --operatingsystem-id OPERATINGSYSTEM_ID
 --parameter-type PARAMETER_TYPE         Type of the parameter
                                         Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json'
                                         Default: "string"
 --value VALUE                           Parameter value
 -h, --help                              Print help

2.44.15. hammer os update

オペレーティングシステムを更新します。

Usage:
    hammer os update [OPTIONS]

Options:
 --architecture-ids ARCHITECTURE_IDS                   IDs of associated architectures
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --architectures ARCHITECTURE_NAMES                    Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --config-template-ids CONFIG_TEMPLATE_IDS             IDs of associated provisioning templates
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --config-templates CONFIG_TEMPLATE_NAMES              Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --description DESCRIPTION
 --family FAMILY
 --id ID
 --location LOCATION_NAME                              Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE                       Location title
 --major MAJOR
 --media MEDIUM_NAMES                                  Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --medium-ids MEDIUM_IDS                               IDs of associated media
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --minor MINOR
 --name NAME
 --organization ORGANIZATION_NAME                      Organization name
 --organization-id ORGANIZATION_ID                     Organization ID
 --organization-title ORGANIZATION_TITLE               Organization title
 --os-parameters-attributes OS_PARAMETERS_ATTRIBUTES   Array of parameters
                                                       Comma separated list of values defined by a schema. See Option details section below.
                                                       JSON is acceptable and preferred way for complex parameters
 --partition-table-ids PARTITION_TABLE_IDS             IDs of associated partition tables
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --partition-tables PARTITION_TABLE_NAMES              Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --password-hash PASSWORD_HASH                         Root password hash function to use, one of MD5, SHA256, SHA512, Base64
 --provisioning-template-ids PROVISIONING_TEMPLATE_IDS IDs of associated provisioning templates
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --provisioning-templates PROVISIONING_TEMPLATE_NAMES  Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --release-name RELEASE_NAME
 --title TITLE                                         Operating system title
 -h, --help                                            Print help

Option details:
  Following parameters accept format defined by its schema (bold are required):

  --os-parameters-attributes  "name=string\,value=string, ... "

2.45. hammer ostree-branch

OSTree ブランチを操作します。

Usage:
    hammer ostree-branch [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 info                          Show an ostree branch
 list                          List ostree_branches

Options:
 -h, --help                    Print help

2.45.1. hammer ostree-branch info

ostree ブランチを表示します。

Usage:
    hammer ostree-branch info [OPTIONS]

Options:
 --id ID                       An ostree branch identifier
 --name NAME                   Name to search by
 --repository REPOSITORY_NAME  Repository name to search by
 --repository-id REPOSITORY_ID Repository ID
 -h, --help                    Print help

2.45.2. hammer ostree-branch list

ostree ブランチの一覧を表示します。

Usage:
    hammer ostree-branch list [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME                    Content view name to search by
 --content-view-filter CONTENT_VIEW_FILTER_NAME      Name to search by
 --content-view-filter-id CONTENT_VIEW_FILTER_ID     Filter identifier
 --content-view-id CONTENT_VIEW_ID                   Content view numeric identifier
 --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number
 --content-view-version-id CONTENT_VIEW_VERSION_ID   Content view version identifier
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by
 --environment-id ENVIRONMENT_ID
 --full-result FULL_RESULT                           Whether or not to show all results
                                                     One of true/false, yes/no, 1/0.
 --ids IDS                                           Ids to filter content by
                                                     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                     JSON is acceptable and preferred way for complex parameters
 --order ORDER                                       Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 --page PAGE                                         Page number, starting at 1
 --per-page PER_PAGE                                 Number of results per page to return
 --product PRODUCT_NAME                              Product name to search by
 --product-id PRODUCT_ID                             Product numeric identifier
 --repository REPOSITORY_NAME                        Repository name to search by
 --repository-id REPOSITORY_ID                       Repository ID
 --search SEARCH                                     Search string
 -h, --help                                          Print help

2.46. hammer package

パッケージを操作します。

Usage:
    hammer package [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 info                          Show a package
 list                          List packages

Options:
 -h, --help                    Print help

2.46.1. hammer package info

パッケージを表示します。

Usage:
    hammer package info [OPTIONS]

Options:
 --id ID                       A package identifier
 --name NAME                   Name to search by
 --repository REPOSITORY_NAME  Repository name to search by
 --repository-id REPOSITORY_ID Repository ID
 -h, --help                    Print help

2.46.2. hammer package list

パッケージの一覧を表示します。

Usage:
    hammer package list [OPTIONS]

Options:
 --available-for AVAILABLE_FOR                               Return packages that can be added to the specified object.  Only the value
                                                             'content_view_version' is supported.
 --content-view CONTENT_VIEW_NAME                            Content view name to search by
 --content-view-filter CONTENT_VIEW_FILTER_NAME              Name to search by
 --content-view-filter-id CONTENT_VIEW_FILTER_ID             Filter identifier
 --content-view-id CONTENT_VIEW_ID                           Content view numeric identifier
 --content-view-version CONTENT_VIEW_VERSION_VERSION         Content view version number
 --content-view-version-id CONTENT_VIEW_VERSION_ID           Content view version identifier
 --environment ENVIRONMENT_NAME                              Lifecycle environment name to search by
 --environment-id ENVIRONMENT_ID
 --full-result FULL_RESULT                                   Whether or not to show all results
                                                             One of true/false, yes/no, 1/0.
 --host HOST_NAME                                            Host name
 --host-id HOST_ID
 --ids IDS                                                   Package identifiers to filter content by
                                                             Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                             JSON is acceptable and preferred way for complex parameters
 --order ORDER                                               Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME                            Organization name to search by
 --organization-id ORGANIZATION_ID                           Organization ID
 --organization-label ORGANIZATION_LABEL                     Organization label to search by
 --packages-restrict-applicable PACKAGES_RESTRICT_APPLICABLE Return packages that are applicable to one or more hosts (defaults to true
                                                             If host_id is specified)
                                                             One of true/false, yes/no, 1/0.
 --packages-restrict-latest PACKAGES_RESTRICT_LATEST         Return only the latest version of each package
                                                             One of true/false, yes/no, 1/0.
 --packages-restrict-upgradable PACKAGES_RESTRICT_UPGRADABLE Return packages that are upgradable on one or more hosts
                                                             One of true/false, yes/no, 1/0.
 --page PAGE                                                 Page number, starting at 1
 --per-page PER_PAGE                                         Number of results per page to return
 --product PRODUCT_NAME                                      Product name to search by
 --product-id PRODUCT_ID                                     Product numeric identifier
 --repository REPOSITORY_NAME                                Repository name to search by
 --repository-id REPOSITORY_ID                               Repository ID
 --search SEARCH                                             Search string
 -h, --help                                                  Print help

2.47. hammer package-group

パッケージグループを操作します。

Usage:
    hammer package-group [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 info                          Show a package group
 list                          List package_groups

Options:
 -h, --help                    Print help

2.47.1. hammer package-group info

パッケージグループを表示します。

Usage:
    hammer package-group info [OPTIONS]

Options:
 --id ID                       A package group identifier
 --name NAME                   Name to search by
 --repository REPOSITORY_NAME  Repository name to search by
 --repository-id REPOSITORY_ID Repository ID
 -h, --help                    Print help

2.47.2. hammer package-group list

パッケージグループの一覧を表示します。

Usage:
    hammer package-group list [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME                    Content view name to search by
 --content-view-filter CONTENT_VIEW_FILTER_NAME      Name to search by
 --content-view-filter-id CONTENT_VIEW_FILTER_ID     Filter identifier
 --content-view-id CONTENT_VIEW_ID                   Content view numeric identifier
 --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number
 --content-view-version-id CONTENT_VIEW_VERSION_ID   Content view version identifier
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by
 --environment-id ENVIRONMENT_ID
 --full-result FULL_RESULT                           Whether or not to show all results
                                                     One of true/false, yes/no, 1/0.
 --ids IDS                                           Ids to filter content by
                                                     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                     JSON is acceptable and preferred way for complex parameters
 --order ORDER                                       Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 --page PAGE                                         Page number, starting at 1
 --per-page PER_PAGE                                 Number of results per page to return
 --product PRODUCT_NAME                              Product name to search by
 --product-id PRODUCT_ID                             Product numeric identifier
 --repository REPOSITORY_NAME                        Repository name to search by
 --repository-id REPOSITORY_ID                       Repository ID
 --search SEARCH                                     Search string
 -h, --help                                          Print help

2.48. hammer partition-table

パーティションテーブルを操作します。

Usage:
    hammer partition-table [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 add-operatingsystem           Associate an operating system
 create                        Create a partition table
 delete                        Delete a partition table
 dump                          View partition table content
 info                          Show a partition table
 list                          List all partition tables
 remove-operatingsystem        Disassociate an operating system
 update                        Update a partition table

Options:
 -h, --help                    Print help

2.48.1. hammer partition-table add-operatingsystem

オペレーティングシステムを関連付けます。

Usage:
    hammer partition-table add-operatingsystem [OPTIONS]

Options:
 --id ID
 --name NAME                             Partition table name
 --operatingsystem OPERATINGSYSTEM_TITLE Operating system title
 --operatingsystem-id OPERATINGSYSTEM_ID
 -h, --help                              Print help

2.48.2. hammer partition-table create

パーティションテーブルを作成します。

Usage:
    hammer partition-table create [OPTIONS]

Options:
 --audit-comment AUDIT_COMMENT
 --file LAYOUT                             Path to a file that contains the partition layout
 --host-ids HOST_IDS                       Array of host IDs to associate with the partition table
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --hostgroup-ids HOSTGROUP_IDS             Array of host group IDs to associate with the partition table
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --hostgroup-titles HOSTGROUP_TITLES       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --hostgroups HOSTGROUP_NAMES              Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --hosts HOST_NAMES                        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locked LOCKED                           Whether or not the template is locked for editing
                                           One of true/false, yes/no, 1/0.
 --name NAME
 --operatingsystem-ids OPERATINGSYSTEM_IDS Array of operating system IDs to associate with the partition table
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --operatingsystems OPERATINGSYSTEM_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --os-family OS_FAMILY
 --snippet SNIPPET                         One of true/false, yes/no, 1/0.
 -h, --help                                Print help

2.48.3. hammer partition-table delete

パーティションテーブルを解除します。

Usage:
    hammer partition-table delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Partition table name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.48.4. hammer partition-table dump

パーティションテーブルのコンテンツを表示します。

Usage:
    hammer partition-table dump [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Partition table name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.48.5. hammer partition-table info

パーティションテーブルを表示します。

Usage:
    hammer partition-table info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Partition table name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.48.6. hammer partition-table list

パーティションテーブルの一覧を表示します。

Usage:
    hammer partition-table list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --operatingsystem OPERATINGSYSTEM_TITLE Operating system title
 --operatingsystem-id OPERATINGSYSTEM_ID
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  default             Values: true, false
  family              string
  layout              text
  location            string
  location_id         integer
  locked              Values: true, false
  name                string
  organization        string
  organization_id     integer
  snippet             Values: true, false
  template            text
  vendor              string

2.48.7. hammer partition-table remove-operatingsystem

オペレーティングシステムの関連付けを解除します。

Usage:
    hammer partition-table remove-operatingsystem [OPTIONS]

Options:
 --id ID
 --name NAME                             Partition table name
 --operatingsystem OPERATINGSYSTEM_TITLE Operating system title
 --operatingsystem-id OPERATINGSYSTEM_ID
 -h, --help                              Print help

2.48.8. hammer partition-table update

パーティションテーブルを更新します。

Usage:
    hammer partition-table update [OPTIONS]

Options:
 --audit-comment AUDIT_COMMENT
 --file LAYOUT                             Path to a file that contains the partition layout
 --host-ids HOST_IDS                       Array of host IDs to associate with the partition table
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --hostgroup-ids HOSTGROUP_IDS             Array of host group IDs to associate with the partition table
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --hostgroup-titles HOSTGROUP_TITLES       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --hostgroups HOSTGROUP_NAMES              Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --hosts HOST_NAMES                        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --id ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locked LOCKED                           Whether or not the template is locked for editing
                                           One of true/false, yes/no, 1/0.
 --name NAME                               Partition table name
 --new-name NEW_NAME
 --operatingsystem-ids OPERATINGSYSTEM_IDS Array of operating system IDs to associate with the partition table
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --operatingsystems OPERATINGSYSTEM_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --os-family OS_FAMILY
 --snippet SNIPPET                         One of true/false, yes/no, 1/0.
 -h, --help                                Print help

2.49. hammer ping

サーバーのステータスを取得します。

Usage:
    hammer ping [OPTIONS]

Options:
 -h, --help                    Print help

2.50. hammer policy

ポリシーを操作します。

Usage:
    hammer policy [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 create                        Create a Policy
 delete                        Delete a Policy
 info                          Show a Policy
 list                          List Policies
 update                        Update a Policy

Options:
 -h, --help                    Print help

2.50.1. hammer policy create

ポリシーを作成します。

Usage:
    hammer policy create [OPTIONS]

Options:
 --cron-line CRON_LINE                                 Policy schedule cron line (only if period == “custom”)
 --day-of-month DAY_OF_MONTH                           Policy schedule day of month (only if period == “monthly”)
 --deploy-by DEPLOY_BY                                 How the policy should be deployed
                                                       Possible value(s): 'puppet', 'ansible', 'manual'
 --description DESCRIPTION                             Policy description
 --host-ids HOST_IDS                                   Apply policy to hosts
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --hostgroup-ids HOSTGROUP_IDS                         Apply policy to host groups
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --hostgroups HOSTGROUP_NAMES                          Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --hosts HOST_NAMES                                    Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --location LOCATION_NAME                              Name to search by
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS                           REPLACE locations with given ids
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                            Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --name NAME                                           Policy name
 --organization ORGANIZATION_NAME                      Name to search by
 --organization-id ORGANIZATION_ID                     Organization ID
 --organization-ids ORGANIZATION_IDS                   REPLACE organizations with given ids.
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES                    Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --period PERIOD                                       Policy schedule period (weekly, monthly, custom)
 --scap-content SCAP_CONTENT_TITLE                     SCAP content title
 --scap-content-id SCAP_CONTENT_ID
 --scap-content-profile-id SCAP_CONTENT_PROFILE_ID     Policy SCAP content profile ID
 --tailoring-file TAILORING_FILE_NAME                  Tailoring file name
 --tailoring-file-id TAILORING_FILE_ID
 --tailoring-file-profile-id TAILORING_FILE_PROFILE_ID Tailoring file profile ID
 --weekday WEEKDAY                                     Policy schedule weekday (only if period == “weekly”)
 -h, --help                                            Print help

2.50.2. hammer policy delete

ポリシーを削除します。

Usage:
    hammer policy delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.50.3. hammer policy info

ポリシーを表示します。

Usage:
    hammer policy info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.50.4. hammer policy list

ポリシーの一覧を表示します。

Usage:
    hammer policy list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  content                 string
  location                string
  location_id             integer
  name                    string
  organization            string
  organization_id         integer
  profile                 string
  tailoring_file          string
  tailoring_file_profile  string

2.50.5. hammer policy update

ポリシーを更新します。

Usage:
    hammer policy update [OPTIONS]

Options:
 --cron-line CRON_LINE                                 Policy schedule cron line (only if period == “custom”)
 --day-of-month DAY_OF_MONTH                           Policy schedule day of month (only if period == “monthly”)
 --deploy-by DEPLOY_BY                                 How the policy should be deployed
                                                       Possible value(s): 'puppet', 'ansible', 'manual'
 --description DESCRIPTION                             Policy description
 --host-ids HOST_IDS                                   Apply policy to hosts
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --hostgroup-ids HOSTGROUP_IDS                         Apply policy to host groups
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --hostgroups HOSTGROUP_NAMES                          Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --hosts HOST_NAMES                                    Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --id ID
 --location LOCATION_NAME                              Name to search by
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS                           REPLACE locations with given ids
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                            Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --name NAME                                           Policy name
 --new-name NEW_NAME                                   Policy name
 --organization ORGANIZATION_NAME                      Name to search by
 --organization-id ORGANIZATION_ID                     Organization ID
 --organization-ids ORGANIZATION_IDS                   REPLACE organizations with given ids.
                                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES                    Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                       JSON is acceptable and preferred way for complex parameters
 --period PERIOD                                       Policy schedule period (weekly, monthly, custom)
 --scap-content SCAP_CONTENT_TITLE                     SCAP content title
 --scap-content-id SCAP_CONTENT_ID
 --scap-content-profile-id SCAP_CONTENT_PROFILE_ID     Policy SCAP content profile ID
 --tailoring-file TAILORING_FILE_NAME                  Tailoring file name
 --tailoring-file-id TAILORING_FILE_ID
 --tailoring-file-profile-id TAILORING_FILE_PROFILE_ID Tailoring file profile ID
 --weekday WEEKDAY                                     Policy schedule weekday (only if period == “weekly”)
 -h, --help                                            Print help

2.51. hammer product

製品を操作します。

Usage:
    hammer product [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 create                        Create a product
 delete                        Destroy a product
 info                          Show a product
 list                          List products
 remove-sync-plan              Delete assignment sync plan and product
 set-sync-plan                 Assign sync plan to product
 synchronize                   Sync all repositories for a product
 update                        Updates a product

Options:
 -h, --help                    Print help

2.51.1. hammer product create

製品を作成します。

Usage:
    hammer product create [OPTIONS]

Options:
 --description DESCRIPTION               Product description
 --gpg-key GPG_KEY_NAME                  Name to search by
 --gpg-key-id GPG_KEY_ID                 Gpg key numeric identifier
 --label LABEL
 --name NAME                             Product name
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --ssl-ca-cert-id SSL_CA_CERT_ID         Idenifier of the SSL CA Cert
 --ssl-client-cert-id SSL_CLIENT_CERT_ID Identifier of the SSL Client Cert
 --ssl-client-key-id SSL_CLIENT_KEY_ID   Identifier of the SSL Client Key
 --sync-plan SYNC_PLAN_NAME              Sync plan name to search by
 --sync-plan-id SYNC_PLAN_ID             Sync plan numeric identifier
 -h, --help                              Print help

2.51.2. hammer product delete

製品を破棄します。

Usage:
    hammer product delete [OPTIONS]

Options:
 --id ID                                 Product numeric identifier
 --name NAME                             Product name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.51.3. hammer product info

製品を表示します。

Usage:
    hammer product info [OPTIONS]

Options:
 --id ID                                 Product numeric identifier
 --name NAME                             Product name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.51.4. hammer product list

製品の一覧を表示します。

Usage:
    hammer product list [OPTIONS]

Options:
 --available-for AVAILABLE_FOR                         Interpret specified object to return only Products that can be associated
                                                       With specified object.  Only 'sync_plan' is supported.
 --custom CUSTOM                                       Return custom products only
                                                       One of true/false, yes/no, 1/0.
 --enabled ENABLED                                     Return enabled products only
                                                       One of true/false, yes/no, 1/0.
 --full-result FULL_RESULT                             Whether or not to show all results
                                                       One of true/false, yes/no, 1/0.
 --include-available-content INCLUDE_AVAILABLE_CONTENT Whether to include available content attribute in results
                                                       One of true/false, yes/no, 1/0.
 --name NAME                                           Filter products by name
 --order ORDER                                         Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME                      Organization name to search by
 --organization-id ORGANIZATION_ID                     Organization ID
 --organization-label ORGANIZATION_LABEL               Organization label to search by
 --page PAGE                                           Page number, starting at 1
 --per-page PER_PAGE                                   Number of results per page to return
 --redhat-only REDHAT_ONLY                             Return Red Hat (non-custom) products only
                                                       One of true/false, yes/no, 1/0.
 --search SEARCH                                       Search string
 --subscription SUBSCRIPTION_NAME                      Subscription name to search by
 --subscription-id SUBSCRIPTION_ID                     Subscription identifier
 --sync-plan SYNC_PLAN_NAME                            Sync plan name to search by
 --sync-plan-id SYNC_PLAN_ID                           Sync plan numeric identifier
 -h, --help                                            Print help

2.51.5. hammer product remove-sync-plan

割り当て同期プランおよび製品を削除します。

Usage:
    hammer product remove-sync-plan [OPTIONS]

Options:
 --description DESCRIPTION               Product description
 --gpg-key GPG_KEY_NAME                  Name to search by
 --gpg-key-id GPG_KEY_ID                 Gpg key numeric identifier
 --id ID                                 Product numeric identifier
 --name NAME                             Product name to search by
 --new-name NEW_NAME                     Product name
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --ssl-ca-cert-id SSL_CA_CERT_ID         Idenifier of the SSL CA Cert
 --ssl-client-cert-id SSL_CLIENT_CERT_ID Identifier of the SSL Client Cert
 --ssl-client-key-id SSL_CLIENT_KEY_ID   Identifier of the SSL Client Key
 -h, --help                              Print help

2.51.6. hammer product set-sync-plan

同期プランを製品に割り当てます。

Usage:
    hammer product set-sync-plan [OPTIONS]

Options:
 --gpg-key GPG_KEY_NAME                  Name to search by
 --gpg-key-id GPG_KEY_ID                 Gpg key numeric identifier
 --id ID                                 Product numeric identifier
 --name NAME                             Product name to search by
 --new-name NEW_NAME                     Product name
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --ssl-ca-cert-id SSL_CA_CERT_ID         Idenifier of the SSL CA Cert
 --ssl-client-cert-id SSL_CLIENT_CERT_ID Identifier of the SSL Client Cert
 --ssl-client-key-id SSL_CLIENT_KEY_ID   Identifier of the SSL Client Key
 --sync-plan SYNC_PLAN_NAME              Sync plan name to search by
 --sync-plan-id SYNC_PLAN_ID             Sync plan numeric identifier
 -h, --help                              Print help

2.51.7. hammer product synchronize

製品のすべてのリポジトリーを同期します。

Usage:
    hammer product synchronize [OPTIONS]

Options:
 --async                                 Do not wait for the task
 --id ID                                 Product ID
 --name NAME                             Product name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.51.8. hammer product update

製品を更新します。

Usage:
    hammer product update [OPTIONS]

Options:
 --description DESCRIPTION               Product description
 --gpg-key GPG_KEY_NAME                  Name to search by
 --gpg-key-id GPG_KEY_ID                 Gpg key numeric identifier
 --id ID                                 Product numeric identifier
 --name NAME                             Product name to search by
 --new-name NEW_NAME                     Product name
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --ssl-ca-cert-id SSL_CA_CERT_ID         Idenifier of the SSL CA Cert
 --ssl-client-cert-id SSL_CLIENT_CERT_ID Identifier of the SSL Client Cert
 --ssl-client-key-id SSL_CLIENT_KEY_ID   Identifier of the SSL Client Key
 --sync-plan SYNC_PLAN_NAME              Sync plan name to search by
 --sync-plan-id SYNC_PLAN_ID             Sync plan numeric identifier
 -h, --help                              Print help

2.52. hammer proxy

スマートプロキシーを操作します。

Usage:
    hammer proxy [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 content                       Manage the capsule content
 create                        Create a capsule
 delete                        Delete a capsule
 import-classes                Import puppet classes from puppet Capsule
 info                          Show a capsule
 list                          List all capsules
 refresh-features              Refresh capsule features
 update                        Update a capsule

Options:
 -h, --help                    Print help

2.52.1. hammer proxy content

Capsule コンテンツを管理します。

Usage:
    hammer proxy content [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 add-lifecycle-environment        Add lifecycle environments to the capsule
 available-lifecycle-environments List the lifecycle environments not attached to the capsule
 cancel-synchronization           Cancel running capsule synchronization
 info                             Get current capsule synchronization status
 lifecycle-environments           List the lifecycle environments attached to the capsule
 remove-lifecycle-environment     Remove lifecycle environments from the capsule
 synchronization-status           Get current capsule synchronization status
 synchronize                      Synchronize the content to the capsule

Options:
 -h, --help                    Print help

2.52.1.1. hammer proxy content add-lifecycle-environment

ライフサイクル環境を Capsule に追加します。

Usage:
    hammer proxy content add-lifecycle-environment [OPTIONS]

Options:
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
 --environment-id ENVIRONMENT_ID                     (--environment-id is deprecated: Use --lifecycle-environment-id instead)
 --id ID                                             Id of the capsule
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME  Lifecycle environment name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
 --name NAME                                         Name to search by
 --organization NAME                                 Organization name
 --organization-id ID                                Organization ID
 -h, --help                                          Print help

2.52.1.2. hammer proxy content available-lifecycle-environments

Capsule に割り当てられていないライフサイクル環境を一覧表示します。

Usage:
    hammer proxy content available-lifecycle-environments [OPTIONS]

Options:
 --id ID                                 Id of the capsule
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.52.1.3. hammer proxy content cancel-synchronization

実行中の Capsule 同期をキャンセルします。

Usage:
    hammer proxy content cancel-synchronization [OPTIONS]

Options:
 --id ID                       Id of the capsule
 --name NAME                   Name to search by
 -h, --help                    Print help

2.52.1.4. hammer proxy content info

現在の Capsule 同期ステータスを取得します。

Usage:
    hammer proxy content info [OPTIONS]

Options:
 --id ID                                 Id of the capsule
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.52.1.5. hammer proxy content lifecycle-environments

Capsule に割り当てられたライフサイクル環境を一覧表示します。

Usage:
    hammer proxy content lifecycle-environments [OPTIONS]

Options:
 --id ID                                 Id of the capsule
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.52.1.6. hammer proxy content remove-lifecycle-environment

ライフサイクル環境を Capsule から削除します。

Usage:
    hammer proxy content remove-lifecycle-environment [OPTIONS]

Options:
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
 --environment-id ENVIRONMENT_ID                     (--environment-id is deprecated: Use --lifecycle-environment-id instead)
 --id ID                                             Id of the capsule
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME  Lifecycle environment name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
 --name NAME                                         Name to search by
 --organization NAME                                 Organization name
 --organization-id ID                                Organization ID
 -h, --help                                          Print help

2.52.1.7. hammer proxy content synchronization-status

現在の Capsule 同期ステータスを取得します。

Usage:
    hammer proxy content synchronization-status [OPTIONS]

Options:
 --id ID                                 Id of the capsule
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 -h, --help                              Print help

2.52.1.8. hammer proxy content synchronize

コンテンツと Capsule を同期します。

Usage:
    hammer proxy content synchronize [OPTIONS]

Options:
 --async                                             Do not wait for the task
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
 --environment-id ENVIRONMENT_ID                     (--environment-id is deprecated: Use --lifecycle-environment-id instead)
 --id ID                                             Id of the capsule
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME  Lifecycle environment name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
 --name NAME                                         Name to search by
 --organization NAME                                 Organization name
 --organization-id ID                                Organization ID
 --skip-metadata-check SKIP_METADATA_CHECK           Skip metadata check on each repository on the capsule
                                                     One of true/false, yes/no, 1/0.
 -h, --help                                          Print help

2.52.2. hammer proxy create

Capsule を作成します。

Usage:
    hammer proxy create [OPTIONS]

Options:
 --download-policy DOWNLOAD_POLICY         Download Policy of the capsule, must be one of immediate, on_demand,
                                           Background, inherit
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --name NAME
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --url URL
 -h, --help                                Print help

2.52.3. hammer proxy delete

Capsule を削除します。

Usage:
    hammer proxy delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.52.4. hammer proxy import-classes

Puppet Capsule から puppet クラスをインポートします。

Usage:
    hammer proxy import-classes [OPTIONS]

Options:
 --dryrun                                      Do not run the import
 --environment ENVIRONMENT_NAME                Environment name (--environment is deprecated: Use --puppet-environment instead)
 --environment-id ENVIRONMENT_ID               (--environment-id is deprecated: Use --puppet-environment-id instead)
 --except EXCEPT                               Optional comma-delimited string containing either 'new',
                                               'updated', or 'obsolete' that is used to limit the imported
                                               Puppet classes
 --id ID
 --location LOCATION_NAME                      Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE               Location title
 --name NAME                                   Name to search by
 --organization ORGANIZATION_NAME              Organization name
 --organization-id ORGANIZATION_ID             Organization ID
 --organization-title ORGANIZATION_TITLE       Organization title
 --puppet-environment PUPPET_ENVIRONMENT_NAME  Puppet environment name
 --puppet-environment-id PUPPET_ENVIRONMENT_ID
 -h, --help                                    Print help

2.52.5. hammer proxy info

Capsule を表示します。

Usage:
    hammer proxy info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.52.6. hammer proxy list

Capsule を一覧表示します。

Usage:
    hammer proxy list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  feature             string
  location            string
  location_id         integer
  name                string
  organization        string
  organization_id     integer
  url                 string

Search / Order fields:
  feature             string
  location            string
  location_id         integer
  name                string
  organization        string
  organization_id     integer
  url                 string

2.52.7. hammer proxy refresh-features

Capsule 機能をリフレッシュします。

Usage:
    hammer proxy refresh-features [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.52.8. hammer proxy update

Capsule を更新します。

Usage:
    hammer proxy update [OPTIONS]

Options:
 --download-policy DOWNLOAD_POLICY         Download Policy of the capsule, must be one of immediate, on_demand,
                                           Background, inherit
 --id ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --name NAME                               Name to search by
 --new-name NEW_NAME
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --url URL
 -h, --help                                Print help

2.53. hammer puppet-class

Puppet モジュールを検索します。

Usage:
    hammer puppet-class [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 info                          Show a Puppet class
 list                          List all Puppet classes
 sc-params                     List all smart class parameters
 smart-variables               List all smart variables

Options:
 -h, --help                    Print help

2.53.1. hammer puppet-class info

Puppet クラスを表示します。

Usage:
    hammer puppet-class info [OPTIONS]

Options:
 --environment ENVIRONMENT_NAME                Environment name (--environment is deprecated: Use --puppet-environment instead)
 --environment-id ENVIRONMENT_ID               (--environment-id is deprecated: Use --puppet-environment-id instead)
 --host HOST_NAME                              Host name
 --host-id HOST_ID
 --hostgroup HOSTGROUP_NAME                    Hostgroup name
 --hostgroup-id HOSTGROUP_ID
 --hostgroup-title HOSTGROUP_TITLE             Hostgroup title
 --id ID                                       ID of Puppet class
 --location LOCATION_NAME                      Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE               Location title
 --name NAME                                   Puppet class name
 --organization ORGANIZATION_NAME              Organization name
 --organization-id ORGANIZATION_ID             Organization ID
 --organization-title ORGANIZATION_TITLE       Organization title
 --puppet-environment PUPPET_ENVIRONMENT_NAME  Puppet environment name
 --puppet-environment-id PUPPET_ENVIRONMENT_ID
 -h, --help                                    Print help

2.53.2. hammer puppet-class list

Puppet クラスの一覧を表示します。

Usage:
    hammer puppet-class list [OPTIONS]

Options:
 --environment ENVIRONMENT_NAME                Environment name (--environment is deprecated: Use --puppet-environment instead)
 --environment-id ENVIRONMENT_ID               (--environment-id is deprecated: Use --puppet-environment-id instead)
 --host HOST_NAME                              Host name
 --host-id HOST_ID
 --hostgroup HOSTGROUP_NAME                    Hostgroup name
 --hostgroup-id HOSTGROUP_ID
 --hostgroup-title HOSTGROUP_TITLE             Hostgroup title
 --location LOCATION_NAME                      Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE               Location title
 --order ORDER                                 Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME              Organization name
 --organization-id ORGANIZATION_ID             Organization ID
 --organization-title ORGANIZATION_TITLE       Organization title
 --page PAGE                                   Paginate results
 --per-page PER_PAGE                           Number of entries per request
 --puppet-environment PUPPET_ENVIRONMENT_NAME  Puppet environment name
 --puppet-environment-id PUPPET_ENVIRONMENT_ID
 --search SEARCH                               Filter results
 -h, --help                                    Print help

Search / Order fields:
  config_group        string
  environment         string
  host                string
  hostgroup           string
  key                 string
  location            string
  name                string
  organization        string

2.53.3. hammer puppet-class sc-params

スマートクラスパラメーターの一覧を表示します。

Usage:
    hammer puppet-class sc-params [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --puppet-class PUPPET_CLASS_NAME        Puppet class name
 --puppet-class-id PUPPET_CLASS_ID       ID of Puppet class
 --search SEARCH                         Filter results
 --show-hidden SHOW_HIDDEN               Display hidden values
                                         One of true/false, yes/no, 1/0.
 -h, --help                              Print help

Search / Order fields:
  avoid_duplicates    Values: true, false
  environment         string
  key                 string
  merge_default       Values: true, false
  merge_overrides     Values: true, false
  override            Values: true, false
  parameter           string
  puppetclass         string
  puppetclass_name    string

2.53.4. hammer puppet-class smart-variables

スマート変数の一覧を表示します。

Usage:
    hammer puppet-class smart-variables [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --puppet-class PUPPET_CLASS_NAME        Puppet class name
 --puppet-class-id PUPPET_CLASS_ID       ID of Puppet class
 --search SEARCH                         Filter results
 --show-hidden SHOW_HIDDEN               Display hidden values
                                         One of true/false, yes/no, 1/0.
 -h, --help                              Print help

Search / Order fields:
  avoid_duplicates    Values: true, false
  key                 string
  merge_default       Values: true, false
  merge_overrides     Values: true, false
  override            Values: true, false
  parameter           string
  puppetclass         string

2.54. hammer puppet-environment

Puppet 環境を操作します。

Usage:
    hammer puppet-environment [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 create                        Create an environment
 delete                        Delete an environment
 info                          Show an environment
 list                          List all environments
 sc-params                     List all smart class parameters
 update                        Update an environment

Options:
 -h, --help                    Print help

2.54.1. hammer puppet-environment create

環境を作成します。

Usage:
    hammer puppet-environment create [OPTIONS]

Options:
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --name NAME
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 -h, --help                                Print help

2.54.2. hammer puppet-environment delete

環境を削除します。

Usage:
    hammer puppet-environment delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Puppet environment name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.54.3. hammer puppet-environment info

環境を表示します。

Usage:
    hammer puppet-environment info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Puppet environment name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.54.4. hammer puppet-environment list

環境を一覧表示します。

Usage:
    hammer puppet-environment list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --puppet-class PUPPET_CLASS_NAME        Puppet class name
 --puppet-class-id PUPPET_CLASS_ID       ID of Puppet class
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  content_view           string
  lifecycle_environment  string
  location               string
  location_id            integer
  name                   string
  organization           string
  organization_id        integer

Search / Order fields:
  content_view           string
  lifecycle_environment  string
  location               string
  location_id            integer
  name                   string
  organization           string
  organization_id        integer

2.54.5. hammer puppet-environment sc-params

スマートクラスパラメーターの一覧を表示します。

Usage:
    hammer puppet-environment sc-params [OPTIONS]

Options:
 --environment ENVIRONMENT_NAME                Environment name (--environment is deprecated: Use --puppet-environment instead)
 --environment-id ENVIRONMENT_ID               (--environment-id is deprecated: Use --puppet-environment-id instead)
 --location LOCATION_NAME                      Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE               Location title
 --order ORDER                                 Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME              Organization name
 --organization-id ORGANIZATION_ID             Organization ID
 --organization-title ORGANIZATION_TITLE       Organization title
 --page PAGE                                   Paginate results
 --per-page PER_PAGE                           Number of entries per request
 --puppet-environment PUPPET_ENVIRONMENT_NAME  Puppet environment name
 --puppet-environment-id PUPPET_ENVIRONMENT_ID
 --search SEARCH                               Filter results
 --show-hidden SHOW_HIDDEN                     Display hidden values
                                               One of true/false, yes/no, 1/0.
 -h, --help                                    Print help

Search / Order fields:
  avoid_duplicates    Values: true, false
  environment         string
  key                 string
  merge_default       Values: true, false
  merge_overrides     Values: true, false
  override            Values: true, false
  parameter           string
  puppetclass         string
  puppetclass_name    string

Search / Order fields:
  avoid_duplicates    Values: true, false
  environment         string
  key                 string
  merge_default       Values: true, false
  merge_overrides     Values: true, false
  override            Values: true, false
  parameter           string
  puppetclass         string
  puppetclass_name    string

2.54.6. hammer puppet-environment update

環境を更新します。

Usage:
    hammer puppet-environment update [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --name NAME                               Puppet environment name
 --new-name NEW_NAME
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 -h, --help                                Print help

2.55. hammer puppet-module

Puppet モジュールの詳細を表示します。

Usage:
    hammer puppet-module [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 info                          Show a puppet module
 list                          List puppet_modules

Options:
 -h, --help                    Print help

2.55.1. hammer puppet-module info

puppet モジュールを表示します。

Usage:
    hammer puppet-module info [OPTIONS]

Options:
 --id ID                                 A puppet module identifier
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --repository REPOSITORY_NAME            Repository name to search by
 --repository-id REPOSITORY_ID           Repository ID
 -h, --help                              Print help

2.55.2. hammer puppet-module list

puppet モジュールの一覧を表示します。

Usage:
    hammer puppet-module list [OPTIONS]

Options:
 --content-view CONTENT_VIEW_NAME                    Content view name to search by
 --content-view-filter CONTENT_VIEW_FILTER_NAME      Name to search by
 --content-view-filter-id CONTENT_VIEW_FILTER_ID     Filter identifier
 --content-view-id CONTENT_VIEW_ID                   Content view numeric identifier
 --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number
 --content-view-version-id CONTENT_VIEW_VERSION_ID   Content view version identifier
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by
 --environment-id ENVIRONMENT_ID
 --full-result FULL_RESULT                           Whether or not to show all results
                                                     One of true/false, yes/no, 1/0.
 --ids IDS                                           Ids to filter content by
                                                     Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                     JSON is acceptable and preferred way for complex parameters
 --order ORDER                                       Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 --page PAGE                                         Page number, starting at 1
 --per-page PER_PAGE                                 Number of results per page to return
 --product PRODUCT_NAME                              Product name to search by
 --product-id PRODUCT_ID                             Product numeric identifier
 --repository REPOSITORY_NAME                        Repository name to search by
 --repository-id REPOSITORY_ID                       Repository ID
 --search SEARCH                                     Search string
 -h, --help                                          Print help

2.56. hammer realm

レルムを操作します。

Usage:
    hammer realm [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 create                        Create a realm
 delete                        Delete a realm
 info                          Show a realm
 list                          List of realms
 update                        Update a realm

Options:
 -h, --help                    Print help

2.56.1. hammer realm create

レルムを作成します。

Usage:
    hammer realm create [OPTIONS]

Options:
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --name NAME                               The realm name, e.g. EXAMPLE.COM
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --realm-proxy-id REALM_PROXY_ID           Capsule ID to use within this realm
 --realm-type REALM_TYPE                   Realm type, e.g. Red Hat Identity Management or Active Directory
 -h, --help                                Print help

2.56.2. hammer realm delete

レルムを削除します。

Usage:
    hammer realm delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.56.3. hammer realm info

レルムを表示します。

Usage:
    hammer realm info [OPTIONS]

Options:
 --id ID                                 Numerical ID or realm name
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.56.4. hammer realm list

レルム一覧を表示します。

Usage:
    hammer realm list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  location            string
  location_id         integer
  name                string
  organization        string
  organization_id     integer
  type                string

2.56.5. hammer realm update

レルムを更新します。

Usage:
    hammer realm update [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --name NAME                               Name to search by
 --new-name NEW_NAME                       The realm name, e.g. EXAMPLE.COM
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --realm-proxy-id REALM_PROXY_ID           Capsule ID to use within this realm
 --realm-type REALM_TYPE                   Realm type, e.g. Red Hat Identity Management or Active Directory
 -h, --help                                Print help

2.57. hammer recurring-logic

再帰論理に関連したアクション

Usage:
    hammer recurring-logic [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 cancel                        Cancel recurring logic
 info                          Show recurring logic details
 list                          List recurring logics

Options:
 -h, --help                    Print help

2.57.1. hammer recurring-logic cancel

再帰論理をキャンセルします。

Usage:
    hammer recurring-logic cancel [OPTIONS]

Options:
 --id ID                                 ID of the recurring logic
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.57.2. hammer recurring-logic info

再帰論理の詳細を表示します。

Usage:
    hammer recurring-logic info [OPTIONS]

Options:
 --id ID                                 ID of the recurring logic
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.57.3. hammer recurring-logic list

再帰論理の一覧を表示します。

Usage:
    hammer recurring-logic list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

2.58. hammer remote-execution-feature

リモート実行機能を管理します。

Usage:
    hammer remote-execution-feature [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 info                          Show remote execution feature
 list                          List remote execution features
 update                        Update a job template

Options:
 -h, --help                    Print help

2.58.1. hammer remote-execution-feature info

リモート実行機能を表示します。

Usage:
    hammer remote-execution-feature info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.58.2. hammer remote-execution-feature list

リモート実行機能を一覧表示します。

Usage:
    hammer remote-execution-feature list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.58.3. hammer remote-execution-feature update

ジョブテンプレートを更新します。

Usage:
    hammer remote-execution-feature update [OPTIONS]

Options:
 --id ID
 --job-template JOB_TEMPLATE_NAME        Name to search by
 --job-template-id JOB_TEMPLATE_ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --new-name NEW_NAME
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.59. hammer report

レポートを参照および読み込みます。

Usage:
    hammer report [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 delete                        Delete a report
 info                          Show a report
 list                          List all reports

Options:
 -h, --help                    Print help

2.59.1. hammer report delete

レポートを削除します。

Usage:
    hammer report delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.59.2. hammer report info

レポートを表示します。

Usage:
    hammer report info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.59.3. hammer report list

レポートの一覧を表示します。

Usage:
    hammer report list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  applied             integer
  environment         string
  eventful            Values: true, false
  failed              integer
  failed_restarts     integer
  host                string
  host_id             integer
  hostgroup           string
  hostgroup_fullname  string
  hostgroup_title     string
  last_report         datetime
  location            string
  log                 text
  organization        string
  origin              string
  pending             integer
  reported            datetime
  resource            text
  restarted           integer
  skipped             integer

Search / Order fields:
  applied             integer
  environment         string
  eventful            Values: true, false
  failed              integer
  failed_restarts     integer
  host                string
  host_id             integer
  hostgroup           string
  hostgroup_fullname  string
  hostgroup_title     string
  last_report         datetime
  location            string
  log                 text
  organization        string
  origin              string
  pending             integer
  reported            datetime
  resource            text
  restarted           integer
  skipped             integer

2.60. hammer report-template

レポートテンプレートを操作します。

Usage:
    hammer report-template [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 clone                         Clone a template
 create                        Create a report template
 delete                        Delete a report template
 dump                          View report content
 generate                      Generate report
 info                          Show a report template
 list                          List all report templates
 report-data                   Downloads a generated report
 schedule                      Schedule generating of a report
 update                        Update a report template

Options:
 -h, --help                    Print help

2.60.1. hammer report-template clone

テンプレートのクローンを作成します。

Usage:
    hammer report-template clone [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --new-name NEW_NAME
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.60.2. hammer report-template create

レポートテンプレートを作成します。

Usage:
    hammer report-template create [OPTIONS]

Options:
 --audit-comment AUDIT_COMMENT
 --default DEFAULT                         Whether or not the template is added automatically to new organizations and
                                           Locations
                                           One of true/false, yes/no, 1/0.
 --file LAYOUT                             Path to a file that contains the report template content
 --interactive, -i                         Open empty template in an $EDITOR. Upload the result
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locked LOCKED                           Whether or not the template is locked for editing
                                           One of true/false, yes/no, 1/0.
 --name NAME
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --snippet SNIPPET                         One of true/false, yes/no, 1/0.
 -h, --help                                Print help

2.60.3. hammer report-template delete

レポートテンプレートを削除します。

Usage:
    hammer report-template delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.60.4. hammer report-template dump

レポートコンテンツを表示します。

Usage:
    hammer report-template dump [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.60.5. hammer report-template generate

レポートを生成します。

Usage:
    hammer report-template generate [OPTIONS]

Options:
 --gzip GZIP                             Compress the report uzing gzip
                                         One of true/false, yes/no, 1/0.
 --id ID
 --inputs INPUTS                         Specify inputs
                                         Comma-separated list of key=value.
                                         JSON is acceptable and preferred way for complex parameters
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --path PATH                             Path to directory where downloaded content will be saved
 -h, --help                              Print help

2.60.6. hammer report-template info

レポートテンプレートを表示します。

Usage:
    hammer report-template info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.60.7. hammer report-template list

全レポートテンプレートを一覧で表示します。

Usage:
    hammer report-template list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  default             Values: true, false
  location            string
  location_id         integer
  locked              Values: true, false
  name                string
  organization        string
  organization_id     integer
  snippet             Values: true, false
  template            text

2.60.8. hammer report-template report-data

生成したレポートをダウンロードします。

Usage:
    hammer report-template report-data [OPTIONS]

Options:
 --id ID
 --job-id JOB_ID                         ID assigned to generation job by the schedule command
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --path PATH                             Path to directory where downloaded content will be saved
 -h, --help                              Print help

2.60.9. hammer report-template schedule

レポートの生成をスケジュールします。

Usage:
    hammer report-template schedule [OPTIONS]

Options:
 --generate-at GENERATE_AT               UTC time to generate report at
 --gzip GZIP                             Compress the report using gzip
                                         One of true/false, yes/no, 1/0.
 --id ID
 --inputs INPUTS                         Specify inputs
                                         Comma-separated list of key=value.
                                         JSON is acceptable and preferred way for complex parameters
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --mail-to MAIL_TO                       If set, scheduled report will be delivered via e-mail. Use ',' to
                                         Separate multiple email addresses.
 --name NAME                             Name to search by
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --path PATH                             Path to directory where downloaded content will be saved. Only usable if wait is specified
 --wait                                  Turns a command to be active, wait for the result and download it right away
 -h, --help                              Print help

2.60.10. hammer report-template update

レポートテンプレートを更新します。

Usage:
    hammer report-template update [OPTIONS]

Options:
 --audit-comment AUDIT_COMMENT
 --default DEFAULT                         Whether or not the template is added automatically to new organizations and
                                           Locations
                                           One of true/false, yes/no, 1/0.
 --file REPORT                             Path to a file that contains the report template content
 --id ID
 --interactive, -i                         Dump existing template and open it in an $EDITOR. Update with the result
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locked LOCKED                           Whether or not the template is locked for editing
                                           One of true/false, yes/no, 1/0.
 --name NAME                               Name to search by
 --new-name NEW_NAME
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --snippet SNIPPET                         One of true/false, yes/no, 1/0.
 -h, --help                                Print help

2.61. hammer repository

リポジトリーを操作します。

Usage:
    hammer repository [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 create                        Create a custom repository
 delete                        Destroy a custom repository
 export                        Export content from a repository to the configured directory
 info                          Show a repository
 list                          List of enabled repositories
 remove-content                Remove content from a repository
 synchronize                   Sync a repository
 update                        Update a repository
 upload-content                Upload content into the repository

Options:
 -h, --help                    Print help

2.61.1. hammer repository create

カスタムリポジトリーを作成します。

Usage:
    hammer repository create [OPTIONS]

Options:
 --checksum-type CHECKSUM_TYPE                             Checksum of the repository, currently 'sha1' & 'sha256'
                                                           Are supported
 --content-type CONTENT_TYPE                               Type of repo (either 'yum', 'deb', 'puppet',
                                                           'docker', or 'ostree')
                                                           Possible value(s): 'docker', 'file', 'ostree', 'puppet', 'yum'
 --deb-architectures DEB_ARCHITECTURES                     Comma separated list of architectures to be synched from deb-archive
 --deb-components DEB_COMPONENTS                           Comma separated list of repo components to be synched from deb-archive
 --deb-releases DEB_RELEASES                               Comma separated list of releases to be synched from deb-archive
 --docker-tags-whitelist DOCKER_TAGS_WHITELIST             Comma separated list of tags to sync for Container Image repository
                                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --docker-upstream-name DOCKER_UPSTREAM_NAME               Name of the upstream docker repository
 --download-policy DOWNLOAD_POLICY                         Download policy for yum repos (either 'immediate',
                                                           'on_demand', or 'background')
                                                           Possible value(s): 'immediate', 'on_demand', 'background'
 --gpg-key GPG_KEY_NAME                                    Name to search by
 --gpg-key-id GPG_KEY_ID                                   Gpg key numeric identifier
 --ignorable-content IGNORABLE_CONTENT                     List of content units to ignore while syncing a yum repository. Must be
                                                           Subset of rpm,drpm,srpm,distribution,erratum
                                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --ignore-global-proxy IGNORE_GLOBAL_PROXY                 If true, will ignore the globally configured Capsule when syncing
                                                           One of true/false, yes/no, 1/0.
 --label LABEL
 --mirror-on-sync MIRROR_ON_SYNC                           True if this repository when synced has to be mirrored from the source and
                                                           Stale rpms removed
                                                           One of true/false, yes/no, 1/0.
 --name NAME
 --organization ORGANIZATION_NAME                          Organization name to search by
 --organization-id ORGANIZATION_ID                         Organization ID
 --organization-label ORGANIZATION_LABEL                   Organization label to search by
 --ostree-upstream-sync-depth OSTREE_UPSTREAM_SYNC_DEPTH   If a custom sync policy is chosen for ostree repositories then a
                                                           'depth' value must be provided
 --ostree-upstream-sync-policy OSTREE_UPSTREAM_SYNC_POLICY Policies for syncing upstream ostree repositories
                                                           Possible value(s): 'latest', 'all', 'custom'
 --product PRODUCT_NAME                                    Product name to search by
 --product-id PRODUCT_ID                                   Product numeric identifier
 --publish-via-http ENABLE                                 Publish Via HTTP
                                                           One of true/false, yes/no, 1/0.
 --ssl-ca-cert-id SSL_CA_CERT_ID                           Idenifier of the SSL CA Cert
 --ssl-client-cert-id SSL_CLIENT_CERT_ID                   Identifier of the SSL Client Cert
 --ssl-client-key-id SSL_CLIENT_KEY_ID                     Identifier of the SSL Client Key
 --upstream-password UPSTREAM_PASSWORD                     Password of the upstream repository user used for authentication
 --upstream-username UPSTREAM_USERNAME                     Username of the upstream repository user used for authentication
 --url URL                                                 Repository source url
 --verify-ssl-on-sync VERIFY_SSL_ON_SYNC                   If true, Katello will verify the upstream url's SSL certifcates are
                                                           Signed by a trusted CA
                                                           One of true/false, yes/no, 1/0.
 -h, --help                                                Print help

2.61.2. hammer repository delete

カスタムリポジトリーを破棄します。

Usage:
    hammer repository delete [OPTIONS]

Options:
 --id ID
 --name NAME                             Repository name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID to search by
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --product PRODUCT_NAME                  Product name to search by
 --product-id PRODUCT_ID                 Product numeric identifier
 -h, --help                              Print help

2.61.3. hammer repository export

リポジトリーから、設定したディレクトリーにコンテンツをエクスポートします。

Usage:
    hammer repository export [OPTIONS]

Options:
 --async                                 Do not wait for the task
 --export-to-iso EXPORT_TO_ISO           Export to ISO format
                                         One of true/false, yes/no, 1/0.
 --id ID                                 Repository identifier
 --iso-mb-size ISO_MB_SIZE               Maximum size of each ISO in MB
 --name NAME                             Repository name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID to search by
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --product PRODUCT_NAME                  Product name to search by
 --product-id PRODUCT_ID                 Product numeric identifier
 --since SINCE                           Optional date of last export (ex: 2010-01-01T12:00:00Z)
 -h, --help                              Print help

2.61.4. hammer repository info

リポジトリーを表示します。

Usage:
    hammer repository info [OPTIONS]

Options:
 --id ID                                 Repository ID
 --name NAME                             Repository name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --product PRODUCT_NAME                  Product name to search by
 --product-id PRODUCT_ID                 Product numeric identifier
 -h, --help                              Print help

2.61.5. hammer repository list

有効なリポジトリーの一覧を表示します。

Usage:
    hammer repository list [OPTIONS]

Options:
 --available-for AVAILABLE_FOR                       Interpret specified object to return only Repositories that can be
                                                     Associated with specified object.  Only 'content_view' &
                                                     'content_view_version' are supported.
 --content-type CONTENT_TYPE                         Limit to only repositories of this type
                                                     Possible value(s): 'docker', 'file', 'ostree', 'puppet', 'yum'
 --content-view CONTENT_VIEW_NAME                    Content view name to search by
 --content-view-id CONTENT_VIEW_ID                   Content view numeric identifier
 --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number
 --content-view-version-id CONTENT_VIEW_VERSION_ID   Content view version identifier
 --deb DEB_NAME                                      Name to search by
 --deb-id DEB_ID                                     A deb identifier
 --description DESCRIPTION                           Description of the repository
 --environment ENVIRONMENT_NAME                      Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
 --environment-id ENVIRONMENT_ID                     (--environment-id is deprecated: Use --lifecycle-environment-id instead)
 --erratum-id ERRATUM_ID                             Id of an erratum to find repositories that contain the erratum
 --file-id FILE_ID                                   Id of a file to find repositories that contain the file
 --full-result FULL_RESULT                           Whether or not to show all results
                                                     One of true/false, yes/no, 1/0.
 --label LABEL                                       Label of the repository
 --library LIBRARY                                   Show repositories in Library and the default content view
                                                     One of true/false, yes/no, 1/0.
 --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME  Lifecycle environment name to search by
 --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
 --name NAME                                         Name of the repository
 --order ORDER                                       Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 --ostree-branch OSTREE_BRANCH_NAME                  Name to search by
 --ostree-branch-id OSTREE_BRANCH_ID                 An ostree branch identifier
 --page PAGE                                         Page number, starting at 1
 --per-page PER_PAGE                                 Number of results per page to return
 --product PRODUCT_NAME                              Product name to search by
 --product-id PRODUCT_ID                             Product numeric identifier
 --rpm-id RPM_ID                                     Id of a rpm package to find repositories that contain the rpm
 --search SEARCH                                     Search string
 -h, --help                                          Print help

2.61.6. hammer repository remove-content

リポジトリーからコンテンツを削除します。

Usage:
    hammer repository remove-content [OPTIONS]

Options:
 --id ID                                 Repository ID
 --ids IDS                               Array of content ids to remove
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --name NAME                             Repository name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID to search by
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --product PRODUCT_NAME                  Product name to search by
 --product-id PRODUCT_ID                 Product numeric identifier
 --sync-capsule SYNC_CAPSULE             Whether or not to sync an external capsule after upload. Default: true
                                         One of true/false, yes/no, 1/0.
 -h, --help                              Print help

2.61.7. hammer repository synchronize

リポジトリーを同期します。

Usage:
    hammer repository synchronize [OPTIONS]

Options:
 --async                                   Do not wait for the task
 --id ID                                   Repository ID
 --incremental INCREMENTAL                 Perform an incremental import
                                           One of true/false, yes/no, 1/0.
 --name NAME                               Repository name to search by
 --organization ORGANIZATION_NAME          Organization name to search by
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-label ORGANIZATION_LABEL   Organization label to search by
 --product PRODUCT_NAME                    Product name to search by
 --product-id PRODUCT_ID                   Product numeric identifier
 --skip-metadata-check SKIP_METADATA_CHECK Force sync even if no upstream changes are detected. Only used with yum
                                           Repositories.
                                           One of true/false, yes/no, 1/0.
 --source-url SOURCE_URL                   Temporarily override feed URL for sync
 --validate-contents VALIDATE_CONTENTS     Force a sync and validate the checksums of all content. Only used with yum
                                           Repositories.
                                           One of true/false, yes/no, 1/0.
 -h, --help                                Print help

2.61.8. hammer repository update

リポジトリーを更新します。

Usage:
    hammer repository update [OPTIONS]

Options:
 --checksum-type CHECKSUM_TYPE                             Checksum of the repository, currently 'sha1' & 'sha256'
                                                           Are supported
 --deb-architectures DEB_ARCHITECTURES                     Comma separated list of architectures to be synched from deb-archive
 --deb-components DEB_COMPONENTS                           Comma separated list of repo components to be synched from deb-archive
 --deb-releases DEB_RELEASES                               Comma separated list of releases to be synched from deb-archive
 --docker-digest DIGEST                                    Container Image manifest digest
 --docker-tag TAG                                          Optional custom Container Image tag to specify the value of the Docker digest
 --docker-tags-whitelist DOCKER_TAGS_WHITELIST             Comma separated list of tags to sync for Container Image repository
                                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --docker-upstream-name DOCKER_UPSTREAM_NAME               Name of the upstream docker repository
 --download-policy DOWNLOAD_POLICY                         Download policy for yum repos (either 'immediate',
                                                           'on_demand', or 'background')
                                                           Possible value(s): 'immediate', 'on_demand', 'background'
 --gpg-key GPG_KEY_NAME                                    Name to search by
 --gpg-key-id GPG_KEY_ID                                   Gpg key numeric identifier
 --id ID                                                   Repository ID
 --ignorable-content IGNORABLE_CONTENT                     List of content units to ignore while syncing a yum repository. Must be
                                                           Subset of rpm,drpm,srpm,distribution,erratum
                                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                                           JSON is acceptable and preferred way for complex parameters
 --ignore-global-proxy IGNORE_GLOBAL_PROXY                 If true, will ignore the globally configured Capsule when syncing
                                                           One of true/false, yes/no, 1/0.
 --mirror-on-sync MIRROR_ON_SYNC                           True if this repository when synced has to be mirrored from the source and
                                                           Stale rpms removed
                                                           One of true/false, yes/no, 1/0.
 --name NAME                                               Repository name to search by
 --new-name NEW_NAME
 --organization ORGANIZATION_NAME                          Organization name to search by
 --organization-id ORGANIZATION_ID                         Organization ID to search by
 --organization-label ORGANIZATION_LABEL                   Organization label to search by
 --ostree-upstream-sync-depth OSTREE_UPSTREAM_SYNC_DEPTH   If a custom sync policy is chosen for ostree repositories then a
                                                           'depth' value must be provided
 --ostree-upstream-sync-policy OSTREE_UPSTREAM_SYNC_POLICY Policies for syncing upstream ostree repositories
                                                           Possible value(s): 'latest', 'all', 'custom'
 --product PRODUCT_NAME                                    Product name to search by
 --product-id PRODUCT_ID                                   Product numeric identifier
 --publish-via-http ENABLE                                 Publish Via HTTP
                                                           One of true/false, yes/no, 1/0.
 --ssl-ca-cert-id SSL_CA_CERT_ID                           Idenifier of the SSL CA Cert
 --ssl-client-cert-id SSL_CLIENT_CERT_ID                   Identifier of the SSL Client Cert
 --ssl-client-key-id SSL_CLIENT_KEY_ID                     Identifier of the SSL Client Key
 --upstream-password UPSTREAM_PASSWORD                     Password of the upstream repository user used for authentication
 --upstream-username UPSTREAM_USERNAME                     Username of the upstream repository user used for authentication
 --url URL                                                 Repository source url
 --verify-ssl-on-sync VERIFY_SSL_ON_SYNC                   If true, Katello will verify the upstream url's SSL certifcates are
                                                           Signed by a trusted CA
                                                           One of true/false, yes/no, 1/0.
 -h, --help                                                Print help

2.61.9. hammer repository upload-content

コンテンツをリポジトリーにアップロードします

Usage:
    hammer repository upload-content [OPTIONS]

Options:
 --id ID                                 Repository ID
 --name NAME                             Repository name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --path PATH                             Upload file, directory of files, or glob of files as content for a repository.
                                         Globs must be escaped by single or double quotes
 --product PRODUCT_NAME                  Product name to search by
 --product-id PRODUCT_ID                 Product numeric identifier
 -h, --help                              Print help

2.62. hammer repository-set

サーバーでリポジトリーセットを操作します。

Usage:
    hammer repository-set [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 available-repositories        Get list of available repositories for the repository set
 disable                       Disable a repository from the set
 enable                        Enable a repository from the set
 info                          Get info about a repository set
 list                          List repository sets.

Options:
 -h, --help                    Print help

2.62.1. hammer repository-set available-repositories

リポジトリーセットの利用可能なリポジトリーの一覧を取得します。

Usage:
    hammer repository-set available-repositories [OPTIONS]

Options:
 --id ID                                 ID of the repository set
 --name NAME                             Repository set name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --product PRODUCT_NAME                  Product name to search by
 --product-id PRODUCT_ID                 Product numeric identifier
 -h, --help                              Print help

2.62.2. hammer repository-set disable

セットのリポジトリーを無効にします

Usage:
    hammer repository-set disable [OPTIONS]

Options:
 --basearch BASEARCH                     Basearch to disable
 --id ID                                 ID of the repository set to disable
 --name NAME                             Repository set name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --product PRODUCT_NAME                  Product name to search by
 --product-id PRODUCT_ID                 Product numeric identifier
 --releasever RELEASEVER                 Releasever to disable
 -h, --help                              Print help

2.62.3. hammer repository-set enable

セットのリポジトリーを有効にします

Usage:
    hammer repository-set enable [OPTIONS]

Options:
 --basearch BASEARCH                     Basearch to enable
 --id ID                                 ID of the repository set to enable
 --name NAME                             Repository set name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --product PRODUCT_NAME                  Product name to search by
 --product-id PRODUCT_ID                 Product numeric identifier
 --releasever RELEASEVER                 Releasever to enable
 -h, --help                              Print help

2.62.4. hammer repository-set info

リポジトリーセットの情報を取得します。

Usage:
    hammer repository-set info [OPTIONS]

Options:
 --id ID                                 ID of the repository set
 --name NAME                             Repository set name to search by
 --organization ORGANIZATION_NAME        Organization name to search by
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-label ORGANIZATION_LABEL Organization label to search by
 --product PRODUCT_NAME                  Product name to search by
 --product-id PRODUCT_ID                 Product numeric identifier
 -h, --help                              Print help

2.62.5. hammer repository-set list

リポジトリセットを一覧で表示します。

Usage:
    hammer repository-set list [OPTIONS]

Options:
 --enabled ENABLED                                   If true, only return repository sets that have been enabled. Defaults to
                                                     False
                                                     One of true/false, yes/no, 1/0.
 --full-result FULL_RESULT                           Whether or not to show all results
                                                     One of true/false, yes/no, 1/0.
 --name NAME                                         Repository set name to search on
 --order ORDER                                       Sort field and order, eg. 'id DESC'
 --organization ORGANIZATION_NAME                    Organization name to search by
 --organization-id ORGANIZATION_ID                   Organization ID
 --organization-label ORGANIZATION_LABEL             Organization label to search by
 --page PAGE                                         Page number, starting at 1
 --per-page PER_PAGE                                 Number of results per page to return
 --product PRODUCT_NAME                              Product name to search by
 --product-id PRODUCT_ID                             Product numeric identifier
 --search SEARCH                                     Search string
 --with-active-subscription WITH_ACTIVE_SUBSCRIPTION If true, only return repository sets that are associated with an active
                                                     Subscriptions
                                                     One of true/false, yes/no, 1/0.
 -h, --help                                          Print help

2.63. hammer role

ユーザーロールを操作します。

Usage:
    hammer role [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 clone                         Clone a role
 create                        Create a role
 delete                        Delete a role
 filters                       List all filters
 info                          Show a role
 list                          List all roles
 update                        Update a role

Options:
 -h, --help                    Print help

2.63.1. hammer role clone

ロールのクローンを作成します。

Usage:
    hammer role clone [OPTIONS]

Options:
 --description DESCRIPTION                 Role description
 --id ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --name NAME                               User role name
 --new-name NEW_NAME
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 -h, --help                                Print help

2.63.2. hammer role create

ロールを作成します。

Usage:
    hammer role create [OPTIONS]

Options:
 --description DESCRIPTION                 Role description
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --name NAME
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 -h, --help                                Print help

2.63.3. hammer role delete

ロールを削除します。

Usage:
    hammer role delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             User role name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.63.4. hammer role filters

すべてのフィルターの一覧を表示します。

Usage:
    hammer role filters [OPTIONS]

Options:
 --id ID                                 User role id
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             User role name
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 -h, --help                              Print help

2.63.5. hammer role info

ロールを表示します。

Usage:
    hammer role info [OPTIONS]

Options:
 --description DESCRIPTION
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             User role name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.63.6. hammer role list

ロールの一覧を表示します。

Usage:
    hammer role list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  builtin             Values: true, false
  description         text
  name                string
  permission          string

2.63.7. hammer role update

ロールを更新します。

Usage:
    hammer role update [OPTIONS]

Options:
 --description DESCRIPTION                 Role description
 --id ID
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --name NAME                               User role name
 --new-name NEW_NAME
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 -h, --help                                Print help

2.64. hammer sc-param

スマートクラスパラメーターを操作します。

Usage:
    hammer sc-param [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 add-matcher                   Create an override value for a specific smart variable
 info                          Show a smart class parameter
 list                          List all smart class parameters
 remove-matcher                Delete an override value for a specific smart variable
 update                        Update a smart class parameter

Options:
 -h, --help                    Print help

2.64.1. hammer sc-param add-matcher

特定スマート変数の上書き値を作成します。

Usage:
    hammer sc-param add-matcher [OPTIONS]

Options:
 --location LOCATION_NAME                            Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE                     Location title
 --match MATCH                                       Override match
 --omit OMIT                                         Satellite will not send this parameter in classification output, replaces
                                                     Use_puppet_default
                                                     One of true/false, yes/no, 1/0.
 --organization ORGANIZATION_NAME                    Organization name
 --organization-id ORGANIZATION_ID                   Organization ID
 --organization-title ORGANIZATION_TITLE             Organization title
 --puppet-class PUPPET_CLASS_NAME                    Puppet class name
 --puppet-class-id PUPPET_CLASS_ID                   ID of Puppet class
 --smart-class-parameter SMART_CLASS_PARAMETER_NAME  Smart class parameter name
 --smart-class-parameter-id SMART_CLASS_PARAMETER_ID
 --use-puppet-default USE_PUPPET_DEFAULT             Deprecated, please use omit
                                                     One of true/false, yes/no, 1/0.
 --value VALUE                                       Override value, required if omit is false
 -h, --help                                          Print help

2.64.2. hammer sc-param info

スマートクラスパラメーターを表示します。

Usage:
    hammer sc-param info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Smart class parameter name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --puppet-class PUPPET_CLASS_NAME        Puppet class name
 --puppet-class-id PUPPET_CLASS_ID       ID of Puppet class
 --show-hidden SHOW_HIDDEN               Display hidden values
                                         One of true/false, yes/no, 1/0.
 -h, --help                              Print help

2.64.3. hammer sc-param list

スマートクラスパラメーターの一覧を表示します。

Usage:
    hammer sc-param list [OPTIONS]

Options:
 --environment ENVIRONMENT_NAME                Environment name (--environment is deprecated: Use --puppet-environment instead)
 --environment-id ENVIRONMENT_ID               (--environment-id is deprecated: Use --puppet-environment-id instead)
 --host HOST_NAME                              Host name
 --host-id HOST_ID
 --hostgroup HOSTGROUP_NAME                    Hostgroup name
 --hostgroup-id HOSTGROUP_ID
 --hostgroup-title HOSTGROUP_TITLE             Hostgroup title
 --location LOCATION_NAME                      Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE               Location title
 --order ORDER                                 Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME              Organization name
 --organization-id ORGANIZATION_ID             Organization ID
 --organization-title ORGANIZATION_TITLE       Organization title
 --page PAGE                                   Paginate results
 --per-page PER_PAGE                           Number of entries per request
 --puppet-class PUPPET_CLASS_NAME              Puppet class name
 --puppet-class-id PUPPET_CLASS_ID             ID of Puppet class
 --puppet-environment PUPPET_ENVIRONMENT_NAME  Puppet environment name
 --puppet-environment-id PUPPET_ENVIRONMENT_ID
 --search SEARCH                               Filter results
 --show-hidden SHOW_HIDDEN                     Display hidden values
                                               One of true/false, yes/no, 1/0.
 -h, --help                                    Print help

Search / Order fields:
  avoid_duplicates    Values: true, false
  environment         string
  key                 string
  merge_default       Values: true, false
  merge_overrides     Values: true, false
  override            Values: true, false
  parameter           string
  puppetclass         string
  puppetclass_name    string

2.64.4. hammer sc-param remove-matcher

特定スマート変数の上書き値を削除します。

Usage:
    hammer sc-param remove-matcher [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                            Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE                     Location title
 --organization ORGANIZATION_NAME                    Organization name
 --organization-id ORGANIZATION_ID                   Organization ID
 --organization-title ORGANIZATION_TITLE             Organization title
 --puppet-class PUPPET_CLASS_NAME                    Puppet class name
 --puppet-class-id PUPPET_CLASS_ID                   ID of Puppet class
 --smart-class-parameter SMART_CLASS_PARAMETER_NAME  Smart class parameter name
 --smart-class-parameter-id SMART_CLASS_PARAMETER_ID
 -h, --help                                          Print help

2.64.5. hammer sc-param update

スマートクラスパラメーターを更新します。

Usage:
    hammer sc-param update [OPTIONS]

Options:
 --avoid-duplicates AVOID_DUPLICATES         Remove duplicate values (only array type)
                                             One of true/false, yes/no, 1/0.
 --default-value VALUE                       Value to use when there is no match
 --description DESCRIPTION                   Description of smart class
 --hidden-value HIDDEN_VALUE                 When enabled the parameter is hidden in the UI
                                             One of true/false, yes/no, 1/0.
 --id ID
 --location LOCATION_NAME                    Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE             Location title
 --merge-default MERGE_DEFAULT               Include default value when merging all matching values
                                             One of true/false, yes/no, 1/0.
 --merge-overrides MERGE_OVERRIDES           Merge all matching values (only array/hash type)
                                             One of true/false, yes/no, 1/0.
 --name NAME                                 Smart class parameter name
 --omit OMIT                                 Satellite will not send this parameter in classification output. Puppet
                                             Will use the value defined in the Puppet manifest for this parameter
                                             One of true/false, yes/no, 1/0.
 --organization ORGANIZATION_NAME            Organization name
 --organization-id ORGANIZATION_ID           Organization ID
 --organization-title ORGANIZATION_TITLE     Organization title
 --override OVERRIDE                         Override this parameter
                                             One of true/false, yes/no, 1/0.
 --override-value-order OVERRIDE_VALUE_ORDER The order in which values are resolved
                                             Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                             JSON is acceptable and preferred way for complex parameters
 --parameter-type PARAMETER_TYPE             Type of the parameter
                                             Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json'
 --path PATH                                 The order in which values are resolved
 --puppet-class PUPPET_CLASS_NAME            Puppet class name
 --puppet-class-id PUPPET_CLASS_ID           ID of Puppet class
 --required REQUIRED                         This parameter is required
                                             One of true/false, yes/no, 1/0.
 --use-puppet-default USE_PUPPET_DEFAULT     Deprecated, please use omit
                                             One of true/false, yes/no, 1/0.
 --validator-rule VALIDATOR_RULE             Used to enforce certain values for the parameter values
 --validator-type VALIDATOR_TYPE             Type of the validator
                                             Possible value(s): 'regexp', 'list', ''
 -h, --help                                  Print help

2.65. hammer scap-content

SCAP コンテンツを操作します。

Usage:
    hammer scap-content [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 create                        Create SCAP content
 delete                        Deletes an SCAP content
 download                      Download an SCAP content as XML
 info                          Show an SCAP content
 list                          List SCAP contents
 update                        Update an SCAP content

Options:
 -h, --help                    Print help

2.65.1. hammer scap-content create

SCAP コンテンツを作成します。

Usage:
    hammer scap-content create [OPTIONS]

Options:
 --location LOCATION_NAME              Name to search by
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS           REPLACE locations with given ids
                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                       JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES            Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                       JSON is acceptable and preferred way for complex parameters
 --organization ORGANIZATION_NAME      Name to search by
 --organization-id ORGANIZATION_ID     Organization ID
 --organization-ids ORGANIZATION_IDS   REPLACE organizations with given ids.
                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                       JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES    Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                       JSON is acceptable and preferred way for complex parameters
 --original-filename ORIGINAL_FILENAME Original file name of the XML file
 --scap-file SCAP_FILE                 SCAP content file
 --title TITLE                         SCAP content name
 -h, --help                            Print help

2.65.2. hammer scap-content delete

SCAP コンテンツを削除します。

Usage:
    hammer scap-content delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME          Name to search by
 --location-id LOCATION_ID
 --organization ORGANIZATION_NAME  Name to search by
 --organization-id ORGANIZATION_ID Organization ID
 --title TITLE                     SCAP content title
 -h, --help                        Print help

2.65.3. hammer scap-content download

XML で SCAP コンテンツをダウンロードします。

Usage:
    hammer scap-content download [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME          Name to search by
 --location-id LOCATION_ID
 --organization ORGANIZATION_NAME  Name to search by
 --organization-id ORGANIZATION_ID Organization ID
 --path PATH                       Path to directory where downloaded file will be saved
 --title TITLE                     SCAP content title
 -h, --help                        Print help

2.65.4. hammer scap-content info

SCAP コンテンツを表示します。

Usage:
    hammer scap-content info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME          Name to search by
 --location-id LOCATION_ID
 --organization ORGANIZATION_NAME  Name to search by
 --organization-id ORGANIZATION_ID Organization ID
 --title TITLE                     SCAP content title
 -h, --help                        Print help

2.65.5. hammer scap-content list

SCAP コンテンツの一覧を表示します。

Usage:
    hammer scap-content list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  created_at          datetime
  filename            string
  location            string
  location_id         integer
  organization        string
  organization_id     integer
  title               string

2.65.6. hammer scap-content update

SCAP コンテンツを更新します。

Usage:
    hammer scap-content update [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME              Name to search by
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS           REPLACE locations with given ids
                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                       JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES            Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                       JSON is acceptable and preferred way for complex parameters
 --new-title NEW_TITLE                 SCAP content name
 --organization ORGANIZATION_NAME      Name to search by
 --organization-id ORGANIZATION_ID     Organization ID
 --organization-ids ORGANIZATION_IDS   REPLACE organizations with given ids.
                                       Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                       JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES    Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                       JSON is acceptable and preferred way for complex parameters
 --original-filename ORIGINAL_FILENAME Original file name of the XML file
 --scap-file SCAP_FILE                 SCAP content file
 --title TITLE                         SCAP content title
 -h, --help                            Print help

2.66. hammer settings

サーバー設定を変更します。

Usage:
    hammer settings [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 list                          List all settings
 set                           Update a setting

Options:
 -h, --help                    Print help

2.66.1. hammer settings list

設定を一覧表示します。

Usage:
    hammer settings list [OPTIONS]

Options:
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  description         text
  name                string

2.66.2. hammer settings set

設定を更新します。

Usage:
    hammer settings set [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Setting name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --value VALUE
 -h, --help                              Print help

2.67. hammer shell

インタラクティブシェル

Usage:
    hammer shell [OPTIONS]

Options:
 -h, --help                    Print help

2.68. hammer smart-variable

スマート変数を操作します。

Usage:
    hammer smart-variable [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 add-matcher                   Create an override value for a specific smart variable
 create                        Create a smart variable
 delete                        Delete a smart variable
 info                          Show a smart variable
 list                          List all smart variables
 remove-matcher                Delete an override value for a specific smart variable
 update                        Update a smart variable

Options:
 -h, --help                    Print help

2.68.1. hammer smart-variable add-matcher

特定スマート変数の上書き値を作成します。

Usage:
    hammer smart-variable add-matcher [OPTIONS]

Options:
 --location LOCATION_NAME                 Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE          Location title
 --match MATCH                            Override match
 --omit OMIT                              Satellite will not send this parameter in classification output, replaces
                                          Use_puppet_default
                                          One of true/false, yes/no, 1/0.
 --organization ORGANIZATION_NAME         Organization name
 --organization-id ORGANIZATION_ID        Organization ID
 --organization-title ORGANIZATION_TITLE  Organization title
 --smart-variable SMART_VARIABLE_VARIABLE Smart variable name
 --smart-variable-id SMART_VARIABLE_ID
 --use-puppet-default USE_PUPPET_DEFAULT  Deprecated, please use omit
                                          One of true/false, yes/no, 1/0.
 --value VALUE                            Override value, required if omit is false
 -h, --help                               Print help

2.68.2. hammer smart-variable create

スマート変数を作成します。

Usage:
    hammer smart-variable create [OPTIONS]

Options:
 --avoid-duplicates AVOID_DUPLICATES         Remove duplicate values (only array type)
                                             One of true/false, yes/no, 1/0.
 --default-value VALUE                       Value to use when there is no match
 --description DESCRIPTION                   Description of variable
 --hidden-value HIDDEN_VALUE                 When enabled the parameter is hidden in the UI
                                             One of true/false, yes/no, 1/0.
 --location LOCATION_NAME                    Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE             Location title
 --merge-default MERGE_DEFAULT               Include default value when merging all matching values
                                             One of true/false, yes/no, 1/0.
 --merge-overrides MERGE_OVERRIDES           Merge all matching values (only array/hash type)
                                             One of true/false, yes/no, 1/0.
 --organization ORGANIZATION_NAME            Organization name
 --organization-id ORGANIZATION_ID           Organization ID
 --organization-title ORGANIZATION_TITLE     Organization title
 --override-value-order OVERRIDE_VALUE_ORDER The order in which values are resolved
                                             Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                             JSON is acceptable and preferred way for complex parameters
 --puppet-class PUPPET_CLASS_NAME            Puppet class name
 --puppet-class-id PUPPET_CLASS_ID           ID of Puppet class
 --validator-rule VALIDATOR_RULE             Used to enforce certain values for the parameter values
 --validator-type VALIDATOR_TYPE             Type of the validator
                                             Possible value(s): 'regexp', 'list', ''
 --variable VARIABLE                         Name of variable
 --variable-type VARIABLE_TYPE               Type of the variable
                                             Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json'
 -h, --help                                  Print help

2.68.3. hammer smart-variable delete

スマート変数を削除します。

Usage:
    hammer smart-variable delete [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Smart variable name (Deprecated: Use --variable instead)
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --variable VARIABLE                     Smart variable name
 -h, --help                              Print help

2.68.4. hammer smart-variable info

スマート変数を表示します。

Usage:
    hammer smart-variable info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Smart variable name (Deprecated: Use --variable instead)
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --show-hidden SHOW_HIDDEN               Display hidden values
                                         One of true/false, yes/no, 1/0.
 --variable VARIABLE                     Smart variable name
 -h, --help                              Print help

2.68.5. hammer smart-variable list

スマート変数の一覧を表示します。

Usage:
    hammer smart-variable list [OPTIONS]

Options:
 --host HOST_NAME                        Host name
 --host-id HOST_ID
 --hostgroup HOSTGROUP_NAME              Hostgroup name
 --hostgroup-id HOSTGROUP_ID
 --hostgroup-title HOSTGROUP_TITLE       Hostgroup title
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --puppet-class PUPPET_CLASS_NAME        Puppet class name
 --puppet-class-id PUPPET_CLASS_ID       ID of Puppet class
 --search SEARCH                         Filter results
 --show-hidden SHOW_HIDDEN               Display hidden values
                                         One of true/false, yes/no, 1/0.
 -h, --help                              Print help

Search / Order fields:
  avoid_duplicates    Values: true, false
  key                 string
  merge_default       Values: true, false
  merge_overrides     Values: true, false
  override            Values: true, false
  parameter           string
  puppetclass         string

2.68.6. hammer smart-variable remove-matcher

特定スマート変数の上書き値を削除します。

Usage:
    hammer smart-variable remove-matcher [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                 Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE          Location title
 --organization ORGANIZATION_NAME         Organization name
 --organization-id ORGANIZATION_ID        Organization ID
 --organization-title ORGANIZATION_TITLE  Organization title
 --smart-variable SMART_VARIABLE_VARIABLE Smart variable name
 --smart-variable-id SMART_VARIABLE_ID
 -h, --help                               Print help

2.68.7. hammer smart-variable update

スマート変数を更新します。

Usage:
    hammer smart-variable update [OPTIONS]

Options:
 --avoid-duplicates AVOID_DUPLICATES         Remove duplicate values (only array type)
                                             One of true/false, yes/no, 1/0.
 --default-value VALUE                       Value to use when there is no match
 --description DESCRIPTION                   Description of variable
 --hidden-value HIDDEN_VALUE                 When enabled the parameter is hidden in the UI
                                             One of true/false, yes/no, 1/0.
 --id ID
 --location LOCATION_NAME                    Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE             Location title
 --merge-default MERGE_DEFAULT               Include default value when merging all matching values
                                             One of true/false, yes/no, 1/0.
 --merge-overrides MERGE_OVERRIDES           Merge all matching values (only array/hash type)
                                             One of true/false, yes/no, 1/0.
 --new-variable NEW_VARIABLE                 Name of variable
 --organization ORGANIZATION_NAME            Organization name
 --organization-id ORGANIZATION_ID           Organization ID
 --organization-title ORGANIZATION_TITLE     Organization title
 --override-value-order OVERRIDE_VALUE_ORDER The order in which values are resolved
                                             Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                             JSON is acceptable and preferred way for complex parameters
 --puppet-class PUPPET_CLASS_NAME            Puppet class name
 --puppet-class-id PUPPET_CLASS_ID           ID of Puppet class
 --validator-rule VALIDATOR_RULE             Used to enforce certain values for the parameter values
 --validator-type VALIDATOR_TYPE             Type of the validator
                                             Possible value(s): 'regexp', 'list', ''
 --variable VARIABLE                         Smart variable name
 --variable-type VARIABLE_TYPE               Type of the variable
                                             Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json'
 -h, --help                                  Print help

2.69. hammer subnet

サブネットを操作します。

Usage:
    hammer subnet [OPTIONS] SUBCOMMAND [ARG] ...

Parameters:
 SUBCOMMAND                    Subcommand
 [ARG] ...                     Subcommand arguments

Subcommands:
 create                        Create a subnet
 delete                        Delete a subnet
 delete-parameter              Delete parameter for a subnet
 info                          Show a subnet
 list                          List of subnets
 set-parameter                 Create or update parameter for a subnet
 update                        Update a subnet

Options:
 -h, --help                    Print help

2.69.1. hammer subnet create

サブネットを作成します。

Usage:
    hammer subnet create [OPTIONS]

Options:
 --boot-mode BOOT_MODE                     Default boot mode for interfaces assigned to this subnet, valid values are
                                           “Static”, “DHCP”
 --description DESCRIPTION                 Subnet description
 --dhcp DHCP_NAME                          DHCP Proxy to use within this subnet
 --dhcp-id DHCP_ID                         DHCP Capsule ID to use within this subnet
 --discovery-id DISCOVERY_ID               ID of Discovery Capsule to use within this subnet for managing connection
                                           To discovered hosts
 --dns DNS_NAME                            DNS Proxy to use within this subnet
 --dns-id DNS_ID                           DNS Capsule ID to use within this subnet
 --dns-primary DNS_PRIMARY                 Primary DNS for this subnet
 --dns-secondary DNS_SECONDARY             Secondary DNS for this subnet
 --domain-ids DOMAIN_IDS                   Domains in which this subnet is part
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --domains DOMAIN_NAMES                    Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --from FROM                               Starting IP Address for IP auto suggestion
 --gateway GATEWAY                         Subnet gateway
 --httpboot-id HTTPBOOT_ID                 HTTPBoot Capsule ID to use within this subnet
 --ipam IPAM                               IP Address auto suggestion mode for this subnet, valid values are “DHCP”,
                                           “Internal DB”, “None”
 --location LOCATION_NAME                  Location name
 --location-id LOCATION_ID
 --location-ids LOCATION_IDS               REPLACE locations with given ids
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --location-title LOCATION_TITLE           Location title
 --location-titles LOCATION_TITLES         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --locations LOCATION_NAMES                Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --mask MASK                               Netmask for this subnet
 --mtu MTU                                 MTU for this subnet
 --name NAME                               Subnet name
 --network NETWORK                         Subnet network
 --network-type NETWORK_TYPE               Type or protocol, IPv4 or IPv6, defaults to IPv4
                                           Possible value(s): 'IPv4', 'IPv6'
 --organization ORGANIZATION_NAME          Organization name
 --organization-id ORGANIZATION_ID         Organization ID
 --organization-ids ORGANIZATION_IDS       REPLACE organizations with given ids.
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organization-title ORGANIZATION_TITLE   Organization title
 --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --organizations ORGANIZATION_NAMES        Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --template-id TEMPLATE_ID                 Template HTTP(S) Capsule ID to use within this subnet
 --tftp TFTP_NAME                          TFTP Proxy to use within this subnet
 --tftp-id TFTP_ID                         TFTP Capsule ID to use within this subnet
 --to TO                                   Ending IP Address for IP auto suggestion
 --vlanid VLANID                           VLAN ID for this subnet
 -h, --help                                Print help

2.69.2. hammer subnet delete

サブネットを削除します。

Usage:
    hammer subnet delete [OPTIONS]

Options:
 --id ID                                 Subnet numeric identifier
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --name NAME                             Subnet name
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 -h, --help                              Print help

2.69.3. hammer subnet delete-parameter

サブネットのパラメーターを削除します。

Usage:
    hammer subnet delete-parameter [OPTIONS]

Options:
 --name NAME                   Parameter name
 --subnet SUBNET_NAME          Subnet name
 --subnet-id SUBNET_ID
 -h, --help                    Print help

2.69.4. hammer subnet info

サブネットを表示します。

Usage:
    hammer subnet info [OPTIONS]

Options:
 --id ID
 --location LOCATION_NAME                        Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE                 Location title
 --name NAME                                     Subnet name
 --organization ORGANIZATION_NAME                Organization name
 --organization-id ORGANIZATION_ID               Organization ID
 --organization-title ORGANIZATION_TITLE         Organization title
 --show-hidden-parameters SHOW_HIDDEN_PARAMETERS Display hidden parameter values
                                                 One of true/false, yes/no, 1/0.
 -h, --help                                      Print help

2.69.5. hammer subnet list

サブネットの一覧を表示します。

Usage:
    hammer subnet list [OPTIONS]

Options:
 --domain DOMAIN_NAME                    Domain name
 --domain-id DOMAIN_ID                   Numerical ID or domain name
 --location LOCATION_NAME                Location name
 --location-id LOCATION_ID
 --location-title LOCATION_TITLE         Location title
 --order ORDER                           Sort field and order, eg. ‘id DESC’
 --organization ORGANIZATION_NAME        Organization name
 --organization-id ORGANIZATION_ID       Organization ID
 --organization-title ORGANIZATION_TITLE Organization title
 --page PAGE                             Paginate results
 --per-page PER_PAGE                     Number of entries per request
 --search SEARCH                         Filter results
 -h, --help                              Print help

Search / Order fields:
  boot_mode           string
  dns_primary         string
  dns_secondary       string
  domain              string
  gateway             string
  ipam                string
  location            string
  location_id         integer
  mask                string
  mtu                 integer
  name                text
  network             string
  organization        string
  organization_id     integer
  params              text
  type                string
  vlanid              integer

2.69.6. hammer subnet set-parameter

サブネットのパラメーターを作成または更新します。

Usage:
    hammer subnet set-parameter [OPTIONS]

Options:
 --hidden-value HIDDEN_VALUE     Should the value be hidden
                                 One of true/false, yes/no, 1/0.
 --name NAME                     Parameter name
 --parameter-type PARAMETER_TYPE Type of the parameter
                                 Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json'
                                 Default: "string"
 --subnet SUBNET_NAME            Subnet name
 --subnet-id SUBNET_ID
 --value VALUE                   Parameter value
 -h, --help                      Print help

2.69.7. hammer subnet update

サブネットを更新します。

Usage:
    hammer subnet update [OPTIONS]

Options:
 --boot-mode BOOT_MODE                     Default boot mode for interfaces assigned to this subnet, valid values are
                                           “Static”, “DHCP”
 --description DESCRIPTION                 Subnet description
 --dhcp DHCP_NAME                          DHCP Proxy to use within this subnet
 --dhcp-id DHCP_ID                         DHCP Capsule ID to use within this subnet
 --discovery-id DISCOVERY_ID               ID of Discovery Capsule to use within this subnet for managing connection
                                           To discovered hosts
 --dns DNS_NAME                            DNS Proxy to use within this subnet
 --dns-id DNS_ID                           DNS Capsule ID to use within this subnet
 --dns-primary DNS_PRIMARY                 Primary DNS for this subnet
 --dns-secondary DNS_SECONDARY             Secondary DNS for this subnet
 --domain-ids DOMAIN_IDS                   Domains in which this subnet is part
                                           Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                           JSON is acceptable and preferred way for complex parameters
 --domains DOMAIN_NAMES                    Comma se