5.3. Monitoring OpenFlows

You can use ovs-ofctl dump-flows command to monitor the OpenFlow flows on a logical switch in your network.

Prerequisites

  • RHOSP deployment with ML2/OVN.

Procedure

  1. On the Controller node, run the command ovs-ofctl dump-flows br-int.
  2. Inspect the output, which will resemble the following example.

    $ ovs-ofctl dump-flows br-int
    NXST_FLOW reply (xid=0x4):
     cookie=0x0, duration=72.132s, table=0, n_packets=0, n_bytes=0, idle_age=72, priority=10,in_port=1,dl_src=00:00:00:00:00:01 actions=resubmit(,1)
     cookie=0x0, duration=60.565s, table=0, n_packets=0, n_bytes=0, idle_age=60, priority=10,in_port=2,dl_src=00:00:00:00:00:02 actions=resubmit(,1)
     cookie=0x0, duration=28.127s, table=0, n_packets=0, n_bytes=0, idle_age=28, priority=0 actions=drop
     cookie=0x0, duration=13.887s, table=1, n_packets=0, n_bytes=0, idle_age=13, priority=0,in_port=1 actions=output:2
     cookie=0x0, duration=4.023s, table=1, n_packets=0, n_bytes=0, idle_age=4, priority=0,in_port=2 actions=output:1