4.2. OVN の論理フローのモニターリング

OVN は論理フローを使用します。これは、優先度、マッチング、アクションで設定されるフローのテーブルです。これらの論理フローは、各コンピュートノード上で実行される ovn-controller に分散されます。以下の例に示したように、コントローラーノード上で ovn-sbctl lflow-list コマンドを使用すると、論理フローの完全なセットを表示することができます。

$ ovn-sbctl --db=tcp:172.17.1.10:6642 lflow-list
    Datapath: "sw0" (d7bf4a7b-e915-4502-8f9d-5995d33f5d10)  Pipeline: ingress
      table=0 (ls_in_port_sec_l2  ), priority=100  , match=(eth.src[40]), action=(drop;)
      table=0 (ls_in_port_sec_l2  ), priority=100  , match=(vlan.present), action=(drop;)
      table=0 (ls_in_port_sec_l2  ), priority=50   , match=(inport == "sw0-port1" && eth.src == {00:00:00:00:00:01}), action=(next;)
      table=0 (ls_in_port_sec_l2  ), priority=50   , match=(inport == "sw0-port2" && eth.src == {00:00:00:00:00:02}), action=(next;)
      table=1 (ls_in_port_sec_ip  ), priority=0    , match=(1), action=(next;)
      table=2 (ls_in_port_sec_nd  ), priority=90   , match=(inport == "sw0-port1" && eth.src == 00:00:00:00:00:01 && arp.sha == 00:00:00:00:00:01), action=(next;)
      table=2 (ls_in_port_sec_nd  ), priority=90   , match=(inport == "sw0-port1" && eth.src == 00:00:00:00:00:01 && ip6 && nd && ((nd.sll == 00:00:00:00:00:00 || nd.sll == 00:00:00:00:00:01) || ((nd.tll == 00:00:00:00:00:00 || nd.tll == 00:00:00:00:00:01)))), action=(next;)
      table=2 (ls_in_port_sec_nd  ), priority=90   , match=(inport == "sw0-port2" && eth.src == 00:00:00:00:00:02 && arp.sha == 00:00:00:00:00:02), action=(next;)
      table=2 (ls_in_port_sec_nd  ), priority=90   , match=(inport == "sw0-port2" && eth.src == 00:00:00:00:00:02 && ip6 && nd && ((nd.sll == 00:00:00:00:00:00 || nd.sll == 00:00:00:00:00:02) || ((nd.tll == 00:00:00:00:00:00 || nd.tll == 00:00:00:00:00:02)))), action=(next;)
      table=2 (ls_in_port_sec_nd  ), priority=80   , match=(inport == "sw0-port1" && (arp || nd)), action=(drop;)
      table=2 (ls_in_port_sec_nd  ), priority=80   , match=(inport == "sw0-port2" && (arp || nd)), action=(drop;)
      table=2 (ls_in_port_sec_nd  ), priority=0    , match=(1), action=(next;)
      table=3 (ls_in_pre_acl      ), priority=0    , match=(1), action=(next;)
      table=4 (ls_in_pre_lb       ), priority=0    , match=(1), action=(next;)
      table=5 (ls_in_pre_stateful ), priority=100  , match=(reg0[0] == 1), action=(ct_next;)
      table=5 (ls_in_pre_stateful ), priority=0    , match=(1), action=(next;)
      table=6 (ls_in_acl          ), priority=0    , match=(1), action=(next;)
      table=7 (ls_in_qos_mark     ), priority=0    , match=(1), action=(next;)
      table=8 (ls_in_lb           ), priority=0    , match=(1), action=(next;)
      table=9 (ls_in_stateful     ), priority=100  , match=(reg0[1] == 1), action=(ct_commit(ct_label=0/1); next;)
      table=9 (ls_in_stateful     ), priority=100  , match=(reg0[2] == 1), action=(ct_lb;)
      table=9 (ls_in_stateful     ), priority=0    , match=(1), action=(next;)
      table=10(ls_in_arp_rsp      ), priority=0    , match=(1), action=(next;)
      table=11(ls_in_dhcp_options ), priority=0    , match=(1), action=(next;)
      table=12(ls_in_dhcp_response), priority=0    , match=(1), action=(next;)
      table=13(ls_in_l2_lkup      ), priority=100  , match=(eth.mcast), action=(outport = "_MC_flood"; output;)
      table=13(ls_in_l2_lkup      ), priority=50   , match=(eth.dst == 00:00:00:00:00:01), action=(outport = "sw0-port1"; output;)
      table=13(ls_in_l2_lkup      ), priority=50   , match=(eth.dst == 00:00:00:00:00:02), action=(outport = "sw0-port2"; output;)
    Datapath: "sw0" (d7bf4a7b-e915-4502-8f9d-5995d33f5d10)  Pipeline: egress
      table=0 (ls_out_pre_lb      ), priority=0    , match=(1), action=(next;)
      table=1 (ls_out_pre_acl     ), priority=0    , match=(1), action=(next;)
      table=2 (ls_out_pre_stateful), priority=100  , match=(reg0[0] == 1), action=(ct_next;)
      table=2 (ls_out_pre_stateful), priority=0    , match=(1), action=(next;)
      table=3 (ls_out_lb          ), priority=0    , match=(1), action=(next;)
      table=4 (ls_out_acl         ), priority=0    , match=(1), action=(next;)
      table=5 (ls_out_qos_mark    ), priority=0    , match=(1), action=(next;)
      table=6 (ls_out_stateful    ), priority=100  , match=(reg0[1] == 1), action=(ct_commit(ct_label=0/1); next;)
      table=6 (ls_out_stateful    ), priority=100  , match=(reg0[2] == 1), action=(ct_lb;)
      table=6 (ls_out_stateful    ), priority=0    , match=(1), action=(next;)
      table=7 (ls_out_port_sec_ip ), priority=0    , match=(1), action=(next;)
      table=8 (ls_out_port_sec_l2 ), priority=100  , match=(eth.mcast), action=(output;)
      table=8 (ls_out_port_sec_l2 ), priority=50   , match=(outport == "sw0-port1" && eth.dst == {00:00:00:00:00:01}), action=(output;)
      table=8 (ls_out_port_sec_l2 ), priority=50   , match=(outport == "sw0-port2" && eth.dst == {00:00:00:00:00:02}), action=(output;)

OVN と OpenFlow には、主に以下のような相違点があります。

この例では、シミュレーションされるパケットに --minimal の出力オプションが示されており、そのパケットが宛先に到達したことを表しています。

$ ovn-trace --minimal sw0 'inport == "sw0-port1" && eth.src == 00:00:00:00:00:01 && eth.dst == 00:00:00:00:00:02'
    # reg14=0x1,vlan_tci=0x0000,dl_src=00:00:00:00:00:01,dl_dst=00:00:00:00:00:02,dl_type=0x0000
    output("sw0-port2");

さらに詳しい情報を表示するには、シミュレーションされる同じパケットの --summary 出力に完全な実行パイプラインが表示されます。

$ ovn-trace --summary sw0 'inport == "sw0-port1" && eth.src == 00:00:00:00:00:01 && eth.dst == 00:00:00:00:00:02'
# reg14=0x1,vlan_tci=0x0000,dl_src=00:00:00:00:00:01,dl_dst=00:00:00:00:00:02,dl_type=0x0000
ingress(dp="sw0", inport="sw0-port1") {
    outport = "sw0-port2";
    output;
    egress(dp="sw0", inport="sw0-port1", outport="sw0-port2") {
        output;
        /* output to "sw0-port2", type "" */;
    };
};

この出力例には、以下の内容が示されています。

詳しい情報は、ovn-trace の man ページを参照してください。