Show Table of Contents
索引
シンボル
- /etc/multipath.conf パッケージ, DM Multipath の設定
- ストレージアレイ
- ストレージアレイの対応, ストレージアレイの対応
- デバイス
- 追加する, ストレージデバイスの設定
- デバイス名, マルチパスデバイス識別子
- フェイルオーバー, DM Multipath の概要
- ブラックリスト
- WWID, WWID でブラックリストの指定
- デバイス名, デバイス名でブラックリストの指定
- 設定ファイル, 設定ファイルの blacklist セクション
- マルチパスデバイス, マルチパスデバイス
- LVM 論理ボリューム, 論理ボリューム内のマルチパスデバイス
- 論理ボリューム, 論理ボリューム内のマルチパスデバイス
- マルチパスデバイスのサイズ変更, オンラインのマルチパスデバイスのサイズ変更
- マルチパスデーモン (multipathd), マルチパスデーモン
- マルチパス設定した root ファイルシステム, root ファイルシステムを、シングルパスデバイスからマルチパスデバイスへ移行
- マルチパス設定した swap ファイルシステム, swap ファイルシステムをシングルパスデバイスからマルチパスデバイスへ移行
- ローカルのディスク、無視する, マルチパスデバイスの作成時にローカルのディスクを無視
- 新機能および変更された機能, 新機能および変更された機能
- 概要
- 新機能および変更された機能, 新機能および変更された機能
- 設定
- DM Multipath, DM Multipath の設定
- 設定する
- DM Multipath, DM Multipath の設定
- 設定ファイル
- alias パラメーター, 設定ファイルの multipaths セクション
- alias_prefix パラメーター, 設定ファイルの devices セクション
- checker_timeout パラメーター, 設定ファイルの defaults セクション
- deferred_remove パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- delay_wait_checks パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- delay_watch_checks パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- detect_path_checker パラメーター, 設定ファイルの defaults セクション, 設定ファイルの devices セクション
- dev_loss_tmo パラメーター, 設定ファイルの defaults セクション, 設定ファイルの devices セクション
- disable_changed_wwids パラメーター, 設定ファイルの defaults セクション
- failback パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- fast_io_fail_tmo パラメーター, 設定ファイルの defaults セクション, 設定ファイルの devices セクション
- features パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- flush_on_last_del パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- force_sync パラメーター, 設定ファイルの defaults セクション
- hardware_handler パラメーター, 設定ファイルの devices セクション
- hw_string_match パラメーター, 設定ファイルの defaults セクション
- ignore_new_boot_devs パラメーター, 設定ファイルの defaults セクション
- log_checker_err パラメーター, 設定ファイルの defaults セクション
- max_fds パラメーター, 設定ファイルの defaults セクション
- max_sectors_kb パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- new_bindings_in_boot パラメーター, 設定ファイルの defaults セクション
- no_path_retry パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- path_checker パラメーター, 設定ファイルの defaults セクション, 設定ファイルの devices セクション
- path_grouping_policy パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- path_selector パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- polling-interval パラメーター, 設定ファイルの defaults セクション
- prio パラメーター, 設定ファイルの defaults セクション, 設定ファイルの devices セクション
- product パラメーター, 設定ファイルの devices セクション
- product_blacklist パラメーター, 設定ファイルの devices セクション
- queue_without_daemon パラメーター, 設定ファイルの defaults セクション
- reassign_maps パラメーター, 設定ファイルの defaults セクション
- remove_retries パラメーター, 設定ファイルの defaults セクション
- retain_attached_hw_handler パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション
- retrigger_delay パラメーター, 設定ファイルの defaults セクション
- retrigger_tries パラメーター, 設定ファイルの defaults セクション
- revision パラメーター, 設定ファイルの devices セクション
- rr_min_io パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション
- rr_weight パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- skip_kpartx パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- uid_attribute パラメーター, 設定ファイルの defaults セクション, 設定ファイルの devices セクション
- user_friendly_names パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- vendor パラメーター, 設定ファイルの devices セクション
- verbosity パラメーター, 設定ファイルの defaults セクション
- wwid パラメーター, 設定ファイルの multipaths セクション
- ブラックリスト, 設定ファイルの blacklist セクション
- 概要, 設定ファイルの概要
A
- active/active 設定
- active/passive 設定
- alias パラメーター, 設定ファイルの multipaths セクション
- 設定ファイル, マルチパスデバイス識別子
- alias_prefix パラメーター, 設定ファイルの devices セクション
B
- blacklist
- デバイスタイプ, デバイスタイプでブラックリストの指定
- デフォルトのデバイス, デバイス名でブラックリストの指定
- blacklist_exceptions セクション
- multipath.conf ファイル, ブラックリストから除外
C
- checker_timeout パラメーター, 設定ファイルの defaults セクション
- configuration file
- config_dir parameter, 設定ファイルの defaults セクション
- detect_prio パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション
- config_dir parameter, 設定ファイルの defaults セクション
D
- defaults セクション
- multipath.conf ファイル, 設定ファイルの defaults セクション
- deferred_remove パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- delay_wait_checks パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- delay_watch_checks パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- detect_path_checker パラメーター, 設定ファイルの defaults セクション, 設定ファイルの devices セクション
- detect_prio パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション
- dev/mapper ディレクトリー, マルチパスデバイス識別子
- device-mapper-multipath パッケージ, DM Multipath の設定
- devices
- 追加する, 設定ファイルの devices セクション
- devices セクション
- multipath.conf ファイル, 設定ファイルの devices セクション
- dev_loss_tmo パラメーター, 設定ファイルの defaults セクション, 設定ファイルの devices セクション
- disable_changed_wwids パラメーター, 設定ファイルの defaults セクション
- DM Multipath
- および LVM, 論理ボリューム内のマルチパスデバイス
- コンポーネント, DM Multipath のコンポーネント
- デバイス, マルチパスデバイス
- デバイス名, マルチパスデバイス識別子
- フェイルオーバー, DM Multipath の概要
- 冗長性, DM Multipath の概要
- 定義, Device Mapper を使ったマルチパス設定
- 概要, DM Multipath の概要
- 設定, DM Multipath の設定
- 設定、概要, DM Multipath 設定の概要
- 設定する, DM Multipath の設定
- 設定ファイル, DM Multipath 設定ファイル
- dm-n デバイス, マルチパスデバイス識別子
- dmsetup コマンド、デバイスマッパーのエントリーを特定する, dmsetup コマンドを使ってデバイスマッパーのエントリーを特定
- dm_multipath カーネルモジュール , DM Multipath のコンポーネント
F
- failback パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- fast_io_fail_tmo パラメーター, 設定ファイルの defaults セクション, 設定ファイルの devices セクション
- features パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- flush_on_last_del パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- force_sync パラメーター, 設定ファイルの defaults セクション
H
- hardware_handler パラメーター, 設定ファイルの devices セクション
- hw_string_match パラメーター, 設定ファイルの defaults セクション
I
- ignore_new_boot_devs パラメーター, 設定ファイルの defaults セクション
- initramfs
- マルチパスを起動する, initramfs ファイルシステムでマルチパスの設定
K
- kpartx コマンド , DM Multipath のコンポーネント
L
- log_checker_err パラメーター, 設定ファイルの defaults セクション
- LVM 論理ボリューム
- マルチパスデバイス, 論理ボリューム内のマルチパスデバイス
- lvm.conf ファイル, 論理ボリューム内のマルチパスデバイス
M
- max_fds パラメーター, 設定ファイルの defaults セクション
- max_sectors_kb パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- mpathconf コマンド , DM Multipath のコンポーネント
- Multipath Helper, Multipath Helper で自動設定ファイルの生成
- multipath コマンド , DM Multipath のコンポーネント
- multipath コマンドの
- オプション, multipath コマンドのオプション
- クエリー, multipath コマンドを使ったマルチパスクエリー
- 出力, Multipath コマンドの出力
- multipath.conf のファイル
- blacklist_exceptions セクション, ブラックリストから除外
- multipath.conf ファイル, ストレージアレイの対応, DM Multipath 設定ファイル
- defaults セクション, 設定ファイルの defaults セクション
- devices セクション, 設定ファイルの devices セクション
- multipaths セクション, 設定ファイルの multipaths セクション
- multipathd
- multipathd start コマンド, DM Multipath の設定
- multipathd デーモン , DM Multipath のコンポーネント
- multipaths セクション
- multipath.conf ファイル, 設定ファイルの multipaths セクション
N
- new_bindings_in_boot パラメーター, 設定ファイルの defaults セクション
- no_path_retry パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
P
- path_checker パラメーター, 設定ファイルの defaults セクション, 設定ファイルの devices セクション
- path_grouping_policy パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- path_selector パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- polling_interval パラメーター, 設定ファイルの defaults セクション
- prio パラメーター, 設定ファイルの defaults セクション, 設定ファイルの devices セクション
- product パラメーター, 設定ファイルの devices セクション
- product_blacklist パラメーター, 設定ファイルの devices セクション
Q
- queue_without_daemon パラメーター, 設定ファイルの defaults セクション
R
- reassign_maps パラメーター, 設定ファイルの defaults セクション
- remove_retries パラメーター, 設定ファイルの defaults セクション
- retain_attached_hw_handler パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション
- retrigger_delay パラメーター, 設定ファイルの defaults セクション
- retrigger_tries パラメーター, 設定ファイルの defaults セクション
- revision パラメーター, 設定ファイルの devices セクション
- root ファイルシステム, root ファイルシステムを、シングルパスデバイスからマルチパスデバイスへ移行
- rr_min_io パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション
- rr_weight パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
S
- skip_kpartxr パラメーター, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
- swap ファイルシステム, swap ファイルシステムをシングルパスデバイスからマルチパスデバイスへ移行
U
- uid_attribute パラメーター, 設定ファイルの defaults セクション, 設定ファイルの devices セクション
- user_friendly_names パラメーター, マルチパスデバイス識別子, 設定ファイルの defaults セクション, 設定ファイルの multipaths セクション, 設定ファイルの devices セクション
V
- vendor パラメーター, 設定ファイルの devices セクション
- verbosity パラメーター, 設定ファイルの defaults セクション
W
- World Wide Identifier (WWID), マルチパスデバイス識別子
- wwid パラメーター, 設定ファイルの multipaths セクション

Where did the comment section go?
Red Hat's documentation publication system recently went through an upgrade to enable speedier, more mobile-friendly content. We decided to re-evaluate our commenting platform to ensure that it meets your expectations and serves as an optimal feedback mechanism. During this redesign, we invite your input on providing feedback on Red Hat documentation via the discussion platform.