Red Hat Training

A Red Hat training course is available for Red Hat Enterprise Linux

4.8. LVS の開始

LVS を開始するには、二つの root ターミナルが同時に開くようにするか、又は 二つの同時 root が、主要 LVS router に対して ssh セッションを 開くようにするのが最適です。
ターミナルの1つで以下のコマンドを使用してカーネルログメッセージを見ます:
tail -f /var/log/messages
それから、他のターミナルに以下のコマンドを入力して LVS を開始します:
/sbin/service pulse start
Follow the progress of the pulse service's startup in the terminal with the kernel log messages. When you see the following output, the pulse daemon has started properly:
gratuitous lvs arps finished
/var/log/messages の表示を停止するには、 Ctrl+c を押します。
この時点以降、主要 LVS router はアクティブ LVS router でもあります。 この時点でも LVS に要求を出すことができますが、LVS をサービス開始状態に進める前に バックアップ LVS router を開始する必要があります。これを実行するには、上記にある工程を バックアップ LVS router ノード上で繰り返すだけです。
この最終手順を完了した後は、LVS が立ち上がり稼働します。