<!-- ServerPeer MBean configuration
    ============================== -->

<mbean code="org.jboss.jms.server.ServerPeer"
  name="jboss.messaging:service=ServerPeer"
  xmbean-dd="xmdesc/ServerPeer-xmbean.xml">

  <!--The unique id of the server peer - in a cluster each node 
      MUST have a unique value - must be an integer-->

  <attribute name="ServerPeerID">
    ${jboss.messaging.ServerPeerID:0}
  </attribute>
  
  <!--The default JNDI context to use for queues when they are 
      deployed without specifying one--> 
  
  <attribute name="DefaultQueueJNDIContext">/queue</attribute>
  
  <!--The default JNDI context to use for topics when they are 
      deployed without specifying one --> 
  
  <attribute name="DefaultTopicJNDIContext">/topic</attribute>

  <attribute name="PostOffice">
    jboss.messaging:service=PostOffice
  </attribute>

  <!-- The default Dead Letter Queue (DLQ) to use for destinations.
       This can be overridden on a per destinatin basis -->
  
  <attribute name="DefaultDLQ">
    jboss.messaging.destination:service=Queue,name=DLQ
  </attribute>
  
  <!--The default maximum number of times to attempt delivery of a 
      message before sending to the DLQ (if configured).
      This can be overridden on a per destination basis-->
  
  <attribute name="DefaultMaxDeliveryAttempts">10</attribute>
  
  <!--The default Expiry Queue to use for destinations. This can 
      be overridden on a per destinatin basis-->
  
  <attribute name="DefaultExpiryQueue">
    jboss.messaging.destination:service=Queue,name=ExpiryQueue
  </attribute>
  
  <!--The default redelivery delay to impose. This can be overridden 
      on a per destination basis -->
  
  <attribute name="DefaultRedeliveryDelay">0</attribute>
  
  <!--The periodicity of the message counter manager enquiring on 
      queues for statistics-->
  
  <attribute name="MessageCounterSamplePeriod">5000</attribute>
  
  <!--The maximum amount of time for a client to wait for failover 
      to start on the server side after it has detected failure-->
  
  <attribute name="FailoverStartTimeout">60000</attribute>
  
  <!--The maximum amount of time for a client to wait for failover 
      to complete on the server side after it has detected failure-->
  
  <attribute name="FailoverCompleteTimeout">300000</attribute>

  <attribute name="StrictTck">false</attribute>
  
  <!--The maximum number of days results to maintain in the message 
      counter history-->
  
  <attribute name="DefaultMessageCounterHistoryDayLimit">-1</attribute>
  
  <!--The name of the connection factory to use for creating 
      connections between nodes to pull messages-->
  
  <attribute name="ClusterPullConnectionFactoryName">
    jboss.messaging.connectionfactory:service=ClusterPullConnectionFactory
  </attribute>
  
  <!--When redistributing messages in the cluster. Do we need to 
      preserve the order of messages received
      by a particular consumer from a particular producer? -->
        
  <attribute name="DefaultPreserveOrdering">false</attribute>
  
  <!-- Max. time to hold previously delivered messages back waiting for
       clients to reconnect after failover -->
  
  <attribute name="RecoverDeliveriesTimeout">300000</attribute>
  
  <!-- Set to true to enable message counters that can be viewed via JMX -->
  
  <attribute name="EnableMessageCounters">false</attribute>
  
  <!-- The password used by the message sucker connections to create connections.
       THIS SHOULD ALWAYS BE CHANGED AT INSTALL TIME TO SECURE SYSTEM
  <attribute name="SuckerPassword"></attribute>
  -->

  <!-- The name of the server aspects configuration resource
  <attribute name="ServerAopConfig">aop/jboss-aop-messaging-server.xml</attribute>
  -->
  <!-- The name of the client aspects configuration resource
    <attribute name="ClientAopConfig">aop/jboss-aop-messaging-client.xml</attribute>
  -->

  <depends optional-attribute-name="PersistenceManager">
    jboss.messaging:service=PersistenceManager
  </depends>
  
  <depends optional-attribute-name="JMSUserManager">
    jboss.messaging:service=JMSUserManager
  </depends>
  
  <depends>jboss.messaging:service=Connector,transport=bisocket</depends>
  <depends optional-attribute-name="SecurityStore"
    proxy-type="org.jboss.jms.server.SecurityStore">
      jboss.messaging:service=SecurityStore
  </depends>
</mbean>

<mbean code="org.jboss.messaging.core.jmx.MessagingPostOfficeService"
  name="jboss.messaging:service=PostOffice"
  xmbean-dd="xmdesc/MessagingPostOffice-xmbean.xml">
      
  <depends optional-attribute-name="ServerPeer">
    jboss.messaging:service=ServerPeer
  </depends>
                
  <depends>
    jboss.jca:service=DataSourceBinding,name=DefaultDS
  </depends>
      
  <depends optional-attribute-name="TransactionManager">
    jboss:service=TransactionManager
  </depends>
      
  <!-- The name of the post office -->                  
    
  <attribute name="PostOfficeName">JMS post office</attribute>
      
  <!-- The datasource used by the post office to access it's 
       binding information -->                     
      
  <attribute name="DataSource">java:/DefaultDS</attribute>
      
  <!-- If true will attempt to create tables and indexes on 
       every start-up -->
                        
  <attribute name="CreateTablesOnStartup">true</attribute>
      
  <!-- If true then we will automatically detect and reject 
       duplicate messages sent during failover -->
      
  <attribute name="DetectDuplicates">true</attribute>
      
  <!-- The size of the id cache to use when detecting duplicate 
       messages -->
      
  <attribute name="IDCacheSize">500</attribute>
      
  <attribute name="SqlProperties">
    CREATE_POSTOFFICE_TABLE=CREATE TABLE JBM_POSTOFFICE 
      (POSTOFFICE_NAME VARCHAR(255), 
      NODE_ID INTEGER, QUEUE_NAME VARCHAR(255), COND VARCHAR(1023), 
      SELECTOR VARCHAR(1023), CHANNEL_ID BIGINT, CLUSTERED CHAR(1), 
      ALL_NODES CHAR(1), 
      PRIMARY KEY(POSTOFFICE_NAME, NODE_ID, QUEUE_NAME)) ENGINE = INNODB

    INSERT_BINDING=INSERT INTO JBM_POSTOFFICE 
      (POSTOFFICE_NAME, NODE_ID, QUEUE_NAME, COND, SELECTOR, 
       CHANNEL_ID, CLUSTERED, ALL_NODES) 
      VALUES (?, ?, ?, ?, ?, ?, ?, ?)

    DELETE_BINDING=DELETE FROM JBM_POSTOFFICE WHERE 
      POSTOFFICE_NAME=? AND NODE_ID=? AND QUEUE_NAME=?

    LOAD_BINDINGS=SELECT QUEUE_NAME, COND, SELECTOR, 
      CHANNEL_ID, CLUSTERED, ALL_NODES FROM 
   JBM_POSTOFFICE WHERE POSTOFFICE_NAME=? AND NODE_ID=?
  </attribute>
      
  <!-- This post office is clustered. If you don't want a clustered post 
       office then set to false -->
      
  <attribute name="Clustered">true</attribute>
      
  <!-- All the remaining properties only have to be specified if the post 
       office is clustered. You can safely comment them out if your post 
       office is non clustered -->
      
  <!-- The JGroups group name that the post office will use -->            
      
  <attribute name="GroupName">
    ${jboss.messaging.groupname:MessagingPostOffice}
  </attribute>
      
  <!-- Max time to wait for state to arrive when the post office 
       joins the cluster -->            
                  
  <attribute name="StateTimeout">5000</attribute>
      
  <!-- Max time to wait for a synchronous call to node members using 
       the MessageDispatcher -->            
                  
  <attribute name="CastTimeout">50000</attribute>
      
  <!-- Set this to true if you want failover of connections to occur 
       when a node is shut down -->
      
  <attribute name="FailoverOnNodeLeave">false</attribute>
      
  <!-- JGroups stack configuration for the data channel - used for sending 
       data across the cluster --> 
                   
  <!-- By default we use the TCP stack for data -->                  
  <attribute name="DataChannelConfig">
    <config>
      <TCP start_port="7900"
        loopback="true"
        recv_buf_size="20000000"
        send_buf_size="640000"
        discard_incompatible_packets="true"
        max_bundle_size="64000"
        max_bundle_timeout="30"
        use_incoming_packet_handler="true"
        use_outgoing_packet_handler="false"
        down_thread="false" up_thread="false"
        enable_bundling="false"
        use_send_queues="false"
        sock_conn_timeout="300"
        skip_suspected_members="true"/>
      <MPING timeout="4000"
        bind_to_all_interfaces="true"
        mcast_addr="${jboss.messaging.datachanneludpaddress:228.6.6.6}"
        mcast_port="${jboss.messaging.datachanneludpport:45567}"
        ip_ttl="8"
        num_initial_members="2"
        num_ping_requests="1"/>                     
      <MERGE2 max_interval="100000"
        down_thread="false" up_thread="false" min_interval="20000"/>
      <FD_SOCK down_thread="false" up_thread="false"/>            
      <VERIFY_SUSPECT timeout="1500" down_thread="false" 
       up_thread="false"/>
      <pbcast.NAKACK max_xmit_size="60000"
        use_mcast_xmit="false" gc_lag="0"
        retransmit_timeout="300,600,1200,2400,4800"
        down_thread="false" up_thread="false"
        discard_delivered_msgs="true"/>
      <pbcast.STABLE stability_delay="1000" desired_avg_gossip="50000"
        down_thread="false" up_thread="false"
        max_bytes="400000"/>
      <pbcast.GMS print_local_addr="true" join_timeout="3000"
        down_thread="false" up_thread="false"
        join_retry_timeout="2000" shun="false"
        view_bundling="true"/>
    </config>        
  </attribute>
      
  <!-- JGroups stack configuration to use for 
       the control channel - used for control messages -->         
              
  <!-- We use udp stack for the control channel -->
  <attribute name="ControlChannelConfig">
    <config>
      <UDP
        mcast_addr="${jboss.messaging.controlchanneludpaddress:228.7.7.7}"
        mcast_port="${jboss.messaging.controlchanneludpport:45568}"
        tos="8"
        ucast_recv_buf_size="20000000"
        ucast_send_buf_size="640000"
        mcast_recv_buf_size="25000000"
        mcast_send_buf_size="640000"
        loopback="false"
        discard_incompatible_packets="true"
        max_bundle_size="64000"
        max_bundle_timeout="30"
        use_incoming_packet_handler="true"
        use_outgoing_packet_handler="false"
        ip_ttl="2"
        down_thread="false" up_thread="false"
        enable_bundling="false"/>
      <PING timeout="2000"
        down_thread="false" up_thread="false" num_initial_members="3"/>
      <MERGE2 max_interval="100000"
        down_thread="false" up_thread="false" min_interval="20000"/>
      <FD_SOCK down_thread="false" up_thread="false"/>
      <FD timeout="10000" max_tries="5" down_thread="false" 
        up_thread="false" shun="true"/>
      <VERIFY_SUSPECT timeout="1500" down_thread="false" 
       up_thread="false"/>
      <pbcast.NAKACK max_xmit_size="60000"
        use_mcast_xmit="false" gc_lag="0"
        retransmit_timeout="300,600,1200,2400,4800"
        down_thread="false" up_thread="false"
        discard_delivered_msgs="true"/>
      <UNICAST timeout="300,600,1200,2400,3600"
        down_thread="false" up_thread="false"/>
      <pbcast.STABLE stability_delay="1000" desired_avg_gossip="50000"
        down_thread="false" up_thread="false"
        max_bytes="400000"/>
      <pbcast.GMS print_local_addr="true" join_timeout="3000" 
        use_flush="true" flush_timeout="3000"
        down_thread="false" up_thread="false"
        join_retry_timeout="2000" shun="false"
        view_bundling="true"/>
      <FRAG2 frag_size="60000" down_thread="false" up_thread="false"/>
      <pbcast.STATE_TRANSFER down_thread="false" up_thread="false" 
        use_flush="true" flush_timeout="3000"/>
      <pbcast.FLUSH down_thread="false" up_thread="false" timeout="20000" 
        auto_flush_conf="false"/>
    </config>
  </attribute>    
      
</mbean>

<!-- ServerPeer MBean configuration ============================== -->
<mbean code="org.jboss.jms.server.ServerPeer"       name="jboss.messaging:service=ServerPeer"
      xmbean-dd="xmdesc/ServerPeer-xmbean.xml">

<!-- The unique id of the server peer - in a cluster each node MUST have a unique value - must be an integer -->

   <attribute name="ServerPeerID">0</attribute>
      
<!-- The default JNDI context to use for queues when they are deployed without specifying one --> 
      
   <attribute name="DefaultQueueJNDIContext">/queue</attribute>
      
<!-- The default JNDI context to use for topics when they are deployed without specifying one --> 
      
   <attribute name="DefaultTopicJNDIContext">/topic</attribute>

<!-- XML CONFIG REMOVED FOR READABILITY -->   


   <depends optional-attribute-name="PersistenceManager">
      jboss.messaging:service=PersistenceManager
   </depends>
      
<!-- XML CONFIG REMOVED FOR READABILITY -->

   <depends optional-attributename="MessagingClusterHealthMBean">
      jboss.messaging:service=MessagingClusterHealthMBean
   </depends>
          
</mbean>

<mbean code="org.jboss.messaging.core.jmx.JDBCPersistenceManagerService"
  name="jboss.messaging:service=PersistenceManager"
  xmbean-dd="xmdesc/JDBCPersistenceManager-xmbean.xml">

  <depends>jboss.jca:service=DataSourceBinding,name=DefaultDS</depends>

  <depends optional-attribute-name="TransactionManager">
    jboss:service=TransactionManager
  </depends>
        
  <!-- The datasource to use for the persistence manager -->
                            
  <attribute name="DataSource">java:/DefaultDS</attribute>

  <!-- If true will attempt to create tables and indexes on every start-up -->
              
  <attribute name="CreateTablesOnStartup">true</attribute>

  <!-- If true then will use JDBC batch updates -->
             
  <attribute name="UsingBatchUpdates">false</attribute>

  <!-- The maximum number of parameters to include in a prepared statement -->            

  <attribute name="MaxParams">500</attribute>
</mbean>

<mbean code="org.jboss.jms.server.plugin.JDBCJMSUserManagerService"
  name="jboss.messaging:service=JMSUserManager"
  xmbean-dd="xmdesc/JMSUserManager-xmbean.xml">
  <depends>jboss.jca:service=DataSourceBinding,name=DefaultDS</depends>
  <depends optional-attribute-name="TransactionManager">
    jboss:service=TransactionManager
  </depends>
  <attribute name="DataSource">java:/DefaultDS</attribute>
  <attribute name="CreateTablesOnStartup">true</attribute>
  <attribute name="SqlProperties">
    CREATE_USER_TABLE=CREATE TABLE JBM_USER (USER_ID VARCHAR(32) NOT NULL,
      PASSWD VARCHAR(32) NOT NULL, CLIENTID VARCHAR(128),
      PRIMARY KEY(USER_ID)) ENGINE = INNODB
    
    CREATE_ROLE_TABLE=CREATE TABLE JBM_ROLE (ROLE_ID VARCHAR(32) NOT NULL,
      USER_ID VARCHAR(32) NOT NULL, PRIMARY KEY(USER_ID, ROLE_ID))
      ENGINE = INNODB
    
    SELECT_PRECONF_CLIENTID=SELECT CLIENTID FROM JBM_USER WHERE USER_ID=?
    
    POPULATE.TABLES.1=INSERT INTO JBM_USER (USER_ID,PASSWD,CLIENTID)
      VALUES ('jdoe','jdoepw','jdoe-id')   
  </attribute>
</mbean>