Red Hat Training

A Red Hat training course is available for Red Hat Enterprise Linux

7.4. Utilisation d'une image de pilotes pendant l'installation

Si vous devez utiliser une image de pilotes, comme lors d'une installation via un périphérique PCMCIA ou NFS, le programme d'installation vous demandera d'insérer le pilote (tel qu'une disquette, un CD-ROM ou le nom d'un fichier) lorsqu'il est nécessaire.
For example, to specifically load a driver diskette that you have created, begin the installation process by booting from the Red Hat Enterprise Linux CD #1 (or using boot media you have created). For x86-based systems, at the boot: prompt, enter linux dd if using an x86 or x86-64 system. Refer to Section 4.3.1, « Démarrage du programme d'installation sur des systèmes x86, AMD64 et Intel® 64 » for details on booting the installation program. For Itanium systems, at the Shell> prompt, type elilo linux dd. Refer to Section 4.3.2, « Démarrage du programme d'installation sur des systèmes Itanium » for details on booting the installation program.
Le programme d'installation de Red Hat Enterprise Linux vous demandera d'insérer le support de pilotes. Une fois le support lu par le programme, les pilotes détectés sur votre système au cours du processus d'installation pourront être pris en charge.