Chapter 19. Upgrading an overcloud with external Ceph deployments

This scenario contains an example upgrade process for an overcloud environment with external Ceph deployments, which includes the following node types:

  • Three Controller nodes
  • External Ceph Storage cluster
  • Multiple Compute nodes

19.1. Running the overcloud upgrade preparation

The upgrade requires running openstack overcloud upgrade prepare command, which performs the following tasks:

  • Updates the overcloud plan to OpenStack Platform 16.2
  • Prepares the nodes for the upgrade
Note

If you are not using the default stack name (overcloud), set your stack name with the --stack STACK NAME option replacing STACK NAME with the name of your stack.

Procedure

  1. Source the stackrc file:

    $ source ~/stackrc
  2. Run the upgrade preparation command:

    $ openstack overcloud upgrade prepare \
        --stack STACK NAME \
        --templates \
        -e ENVIRONMENT FILE
        …​
        -e /home/stack/templates/upgrades-environment.yaml \
        -e /home/stack/templates/rhsm.yaml \
        -e /home/stack/containers-prepare-parameter.yaml \
        -e /usr/share/openstack-tripleo-heat-templates/environments/services/neutron-ovs.yaml \
        …​

    Include the following options relevant to your environment:

    • The environment file (upgrades-environment.yaml) with the upgrade-specific parameters (-e).
    • The environment file (rhsm.yaml) with the registration and subscription parameters (-e).
    • The environment file (containers-prepare-parameter.yaml) with your new container image locations (-e). In most cases, this is the same environment file that the undercloud uses.
    • The environment file (neutron-ovs.yaml) to maintain OVS compatibility.
    • Any custom configuration environment files (-e) relevant to your deployment.
    • If applicable, your custom roles (roles_data) file using --roles-file.
    • If applicable, your composable network (network_data) file using --networks-file.
    • If you use a custom stack name, pass the name with the --stack option.
  3. Wait until the upgrade preparation completes.
  4. Download the container images:

    $ openstack overcloud external-upgrade run --stack STACK NAME --tags container_image_prepare

19.2. Upgrading Controller nodes with external Ceph deployments

If you are upgrading with external Ceph deployments, you must complete this procedure.

To upgrade all the Controller nodes to OpenStack Platform 16.2, you must upgrade each Controller node starting with the bootstrap Controller node.

During the bootstrap Controller node upgrade process, a new Pacemaker cluster is created and new Red Hat OpenStack 16.2 containers are started on the node, while the remaining Controller nodes are still running on Red Hat OpenStack 13.

After upgrading the bootstrap node, you must upgrade each additional node with Pacemaker services and ensure that each node joins the new Pacemaker cluster started with the bootstrap node. For more information, see Overcloud node upgrade workflow.

In this example, the controller nodes are named using the default overcloud-controller-NODEID convention. This includes the following three controller nodes:

  • overcloud-controller-0
  • overcloud-controller-1
  • overcloud-controller-2

Substitute these values for your own node names where applicable.

Procedure

  1. Source the stackrc file:

    $ source ~/stackrc
  2. Identify the bootstrap Controller node by running the following command on the undercloud node:

    $ tripleo-ansible-inventory --list [--stack <stack_name>] |jq .overcloud_Controller.hosts[0]
    • Optional: Replace <stack_name> with the name of the stack. If not specified, the default is overcloud.
  3. Upgrade the bootstrap Controller node:

    1. Run the upgrade command with the system_upgrade tag:

      $ openstack overcloud upgrade run [--stack <stack_name>] --tags system_upgrade --limit overcloud-controller-0

      This command performs the following actions:

      • Performs a Leapp upgrade of the operating system.
      • Performs a reboot as a part of the Leapp upgrade.

        Important

        The next command causes an outage on the control plane. You cannot perform any standard operations on the overcloud during the next few steps.

    2. Run the external upgrade command with the system_upgrade_transfer_data tag:

      $ openstack overcloud external-upgrade run [--stack <stack_name>] --tags system_upgrade_transfer_data

      This command copies the latest version of the database from an existing node to the bootstrap node.

    3. Run the upgrade command with the nova_hybrid_state tag and run only the upgrade_steps_playbook.yaml playbook:

      $ openstack overcloud upgrade run [--stack <stack_name>] --playbook upgrade_steps_playbook.yaml --tags nova_hybrid_state --limit all

      This command launches temporary 16.2 containers on Compute nodes to help facilitate workload migration when you upgrade Compute nodes at a later step.

    4. Run the upgrade command with no tags:

      $ openstack overcloud upgrade run [--stack <stack_name>] --limit overcloud-controller-0

      This command performs the Red Hat OpenStack Platform upgrade.

      Important

      The control plane becomes active when this command finishes. You can perform standard operations on the overcloud again.

    5. Verify that after the upgrade, the new Pacemaker cluster is started and that the control plane services such as galera, rabbit, haproxy, and redis are running:

      $ sudo pcs status
  4. Upgrade the next Controller node:

    1. Verify that the old cluster is no longer running:

      $ sudo pcs status

      An error similar to the following is displayed when the cluster is not running:

      Error: cluster is not currently running on this node
    2. Run the upgrade command with the system_upgrade tag on the next Controller node:

      $ openstack overcloud upgrade run [--stack <stack_name>] --tags system_upgrade --limit overcloud-controller-1

      This command performs the following actions:

      • Performs a Leapp upgrade of the operating system.
      • Performs a reboot as a part of the Leapp upgrade.
    3. Run the upgrade command with no tags:

      $ openstack overcloud upgrade run [--stack <stack_name>] --limit overcloud-controller-0,overcloud-controller-1

      This command performs the Red Hat OpenStack Platform upgrade. In addition to this node, include the previously upgraded bootstrap node in the --limit option.

  5. Upgrade the final Controller node:

    1. Verify that the old cluster is no longer running:

      $ sudo pcs status

      An error similar to the following is displayed when the cluster is not running:

      Error: cluster is not currently running on this node
    2. Run the upgrade command with the system_upgrade tag:

      $ openstack overcloud upgrade run [--stack <stack_name>] --tags system_upgrade --limit overcloud-controller-2

      This command performs the following actions:

      • Performs a Leapp upgrade of the operating system.
      • Performs a reboot as a part of the Leapp upgrade.
    3. Run the upgrade command with no tags:

      $ openstack overcloud upgrade run [--stack <stack_name>] --limit overcloud-controller-0,overcloud-controller-1,overcloud-controller-2

      This command performs the Red Hat OpenStack Platform upgrade. Include all Controller nodes in the --limit option.

19.3. Upgrading Compute nodes

Upgrade all the Compute nodes to OpenStack Platform 16.2.

Note

If you are not using the default stack name (overcloud), set your stack name with the --stack STACK NAME option replacing STACK NAME with the name of your stack.

Procedure

  1. Source the stackrc file:

    $ source ~/stackrc
  2. Migrate your instances. For more information on migration strategies, see Migrating virtual machines between Compute nodes.
  3. Run the upgrade command with the system_upgrade tag:

    $ openstack overcloud upgrade run --stack STACK NAME --tags system_upgrade --limit overcloud-compute-0

    This command performs the following actions:

    • Performs a Leapp upgrade of the operating system.
    • Performs a reboot as a part of the Leapp upgrade.
  4. Run the upgrade command with no tags:

    $ openstack overcloud upgrade run --stack STACK NAME --limit overcloud-compute-0

    This command performs the Red Hat OpenStack Platform upgrade.

  5. To upgrade multiple Compute nodes in parallel, set the --limit option to a comma-separated list of nodes that you want to upgrade. First perform the system_upgrade task:

    $ openstack overcloud upgrade run --stack STACK NAME --tags system_upgrade --limit overcloud-compute-0,overcloud-compute-1,overcloud-compute-2

    Then perform the standard OpenStack service upgrade:

    $ openstack overcloud upgrade run --stack STACK NAME  --limit overcloud-compute-0,overcloud-compute-1,overcloud-compute-2

19.4. Synchronizing the overcloud stack

The upgrade requires an update the overcloud stack to ensure that the stack resource structure and parameters align with a fresh deployment of OpenStack Platform 16.2.

Note

If you are not using the default stack name (overcloud), set your stack name with the --stack STACK NAME option replacing STACK NAME with the name of your stack.

Procedure

  1. Source the stackrc file:

    $ source ~/stackrc
  2. Edit the containers-prepare-parameter.yaml file and remove the following parameters and their values:

    • ceph3_namespace
    • ceph3_tag
    • ceph3_image
    • name_prefix_stein
    • name_suffix_stein
    • namespace_stein
    • tag_stein
  3. To re-enable fencing in your overcloud, set the EnableFencing parameter to true in the fencing.yaml environment file.
  4. Run the upgrade finalization command:

    $ openstack overcloud upgrade converge \
        --stack STACK NAME \
        --templates \
        -e ENVIRONMENT FILE
        …​
        -e /home/stack/templates/upgrades-environment.yaml \
        -e /home/stack/templates/rhsm.yaml \
        -e /home/stack/containers-prepare-parameter.yaml \
        -e /usr/share/openstack-tripleo-heat-templates/environments/services/neutron-ovs.yaml \
        …​

    Include the following options relevant to your environment:

    • The environment file (upgrades-environment.yaml) with the upgrade-specific parameters (-e).
    • The environment file (fencing.yaml) with the EnableFencing parameter set to true.
    • The environment file (rhsm.yaml) with the registration and subscription parameters (-e).
    • The environment file (containers-prepare-parameter.yaml) with your new container image locations (-e). In most cases, this is the same environment file that the undercloud uses.
    • The environment file (neutron-ovs.yaml) to maintain OVS compatibility.
    • Any custom configuration environment files (-e) relevant to your deployment.
    • If applicable, your custom roles (roles_data) file using --roles-file.
    • If applicable, your composable network (network_data) file using --networks-file.
    • If you use a custom stack name, pass the name with the --stack option.
  5. Wait until the stack synchronization completes.
Important

You do not need the upgrades-environment.yaml file for any further deployment operations.